# Airbus Helicopters Alert Service Bulletin EC135-67A-017

Copy: Revision 4 ("Airbus Helicopters ASB EC135-67A-017 Rev 4"), 13 pages: PDF https://openairdocs.org/files/sha256/d8/6e/d86e1b78a97d3c678e7476ab4b7d914cead6e6e34f4f790c1840cc01f5ae28ff; text https://openairdocs.org/service-documents/airbus-helicopters/ec135-67a017/file/d86e1b78a97d.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-0572; AD 2020-26-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC135-67A-017
- Latest revision known: EC135-67A-017, Revision 4, dated April 3, 2017 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec135-67a017

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2020-26-03](https://openairdocs.org/ad/2020-26-03.md), effective Jan 22, 2021: Revisions 03 and 4
- [AD 2007-26-51](https://openairdocs.org/ad/2007-26-51.md), effective Feb 19, 2008: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus-helicopters/ec135-67a017/proposed.md), [1 difficulty report](https://openairdocs.org/service-documents/airbus-helicopters/ec135-67a017/reports.md).

## Text (13 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-0572; AD 2020-26-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-017
Valid for Version(s): T1, T2, T2+, P1, P2, P2+
635 T1, 635 12+, 635 P2+
ALERT SERVICE BULLETIN
SUBJECT:  ROTOR FLIGHT CONTROL - Tail Rotor Controls
Inspection of control rod and ball pivot
For the attention of
Revision No.  Date of issue
Revision 0  2007-12-13
Revision 1  2007-12-21
Revision 2  2008-03-17
Revision 3  2010-07-26
Revision 4  2017-04-03
Summary:
Reason for the first issue (Revision 0) of this Alert Service Bulletin (ASB) was an incident in which
the tail rotor controls have failed.
Reason for last Revision:
Please replace Revision 3 of this ASB with Revision 4.
The repetitive inspection of this ASB has already been incorporated into the AMM/MSM
EC135/EC635. Therefore this inspection was deleted with Revision 4 of this ASB. This ASB does
not feature revision bars as the entire document has been revised.
If Revision 3 of this ASB has already been accomplished, no further work is necessary due to this
Revision.
Compliance:
Compliance with Revision 3 of this ASB is mandatory.
Revision 4, 2017-04-03  PAGE 1 of 4
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-017
PLANNING INFORMATION
1.A EFFECTIVITY
1.A.1 Helicopters/installed equipment and parts
a) EC135, 11, 12, 12+, P1, P2, P2+, 635 11, 635 12+, 635 P2+, up to and including
S/N 0505, excluding S/N 0028.
b) Components affected:  Control rod  P/N L672M2005207
Ball pivot  P/N 92-201-00 or
P/N 92-207-00
1.A.2 Non-installed equipment and parts
See section 1.A.1 part b.
1.B  ASSOCIATED REQUIREMENTS
None.
1.C  REASON
Reason for the first issue of this ASB was an incident in which the tail rotor controls
have failed. To adress this unsafe condition, one-time inspections were introduced
with the first issue.
- With Revision 1, the compliance time has changed and a repetitive inspections
every 50 Fh were introduced.
- With Revision 2, the intervals for the repetitive inspections were changed and the
inspections had been revised. Furthermore the repetitive inspection were
different for ball pivot P/N 92-201-00 and P/N 92-207-00. The compliance time for
the one-time inspection of ball pivot P/N 92-207-00 ended on May 31, 2008.
- With Revision 3, the exchange of the control rod was introduced. The compliance
time for Revision 3 of this ASB ended on August 31, 2011. The repetitive
inspections (see Sections 1.E. (2) of ASB EC135-67A-017 Revision 3 - attached to
this ASB) are already incorporated in the AMM/MSM.
1.D  DESCRIPTION
ASB Revision 4 requires no additional work.
PAGE 2 of 4  Revision 4, 2017-04-03
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-017
1.E  COMPLIANCE
1.E.1 Compliance at H/C manufacturer level
Helicopters/installed equipment and parts:
Not affected.
Non-installed equipment and parts:
Not affected.
1.E.2 Compliance in service
Helicopters/installed equipment and parts:
a) If Revision 3 of this ASB has already been accomplished, no additional work is
necessary.
b) If Revision 3 of this ASB has not been accomplished, see the following steps of
Section 1.E. of ASB EC135-67A-017 Revision 3 which has been attached to this
ASB:
- EFFECTIVITY Control rod L672M2005207 : Steps (1), (3) and (4)
- EFFECTIVITY Ball pivot 92-201-00  : Steps (1) and (3)
- EFFECTIVITY Ball pivot 92-207-00  : Steps (1) and (3)
Non-installed equipment and parts:
Do not install an affected control rod (Section 1.A.2 of this ASB) on any helicopter.
1.F  APPROVAL
Approval of this document:
The technical content of this document is approved under the authority of
DOA NO. EASA.21J.700.
1.G  MANPOWER
None.
1.H  WEIGHT AND BALANCE
No effects on weight ans balance.
1.l  POWER CONSUMPTION
Not affected.
1.J  SOFTWARE UPGRADES/UPDATES
Not changed.
Revision 4, 2017-04-03  PAGE 3 of 4
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-017
1.K  REFERENCES
None.
1.L  OTHER AFFECTED PUBLICATIONS
Publications already updated:
The repetitive inspection introduced with the first issue of this ASB has been
incorporated in the AMM EC135/EC635.
Publications to be updated:
Not affected.
1.M INTERCHANGEABILITY OR MIXABILITY OF PARTS
Interchangeability:
Not affected.
Mixability:
Not affected.
2  MATERIAL INFORMATION
None.
ACCOMPLISHMENT INSTRUCTIONS
None.
4  APPENDIX
Revision 3 of ASB EC135-67A-017 (9 pages) for information.
NOTE  A inspection of the ball pivot P/N 92-207-00 was prescribed with
Revision 2 and Revision 3 of this ASB. It had to be accomplished by
May 31, 2008 at the latest.
The exchange of the control rod was prescribed with Revision 3 of
this ASB. It had to be accomplished by August 31, 2011 at the
latest.
PAGE 4 of 4  Revision 4, 2017-04-03
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

eurocopter  EC135
an EADS Company
ALERT SERVICE BULLETIN
Rotor Flight Controls - Tail Rotor - Inspection of control rod and ball
pivot
1. Planning Information
A. Effectivity
(1) Helicopters affected:  EC135/EC635, all models, excluding S/N 0028.  67A-017 ROS
(2) Components affected:  Control rod  L672M2005207
Ball pivot  92-201-00 (see Figure 1) or
(3) Spare Parts affected:  Not applicable.
B. Concurrent Requirements
Not applicable.
C. Reason
Due to an incident, where the tail rotor controls have failed, as a precautionary measure, a
repeated inspection of the control rod and of the ball pivot of the tail rotor controls is
prescribed with this Alert Service Bulletin.
D. Description
Check attachment hardware on control rod for tight fit. Check ball pivot for freedom of
movement (movability).
E. Compliance
EFFECTIVITY Control rod L672M2005207.
Within the next 50 th after receipt of Revision 02 of this Alert Service Bulletin the
inspection of the control rod i.a.w. Section 3.B must be accomplished.
(2) After this, the inspection of the control rod i.a.w. Section 3.B must be accomplished in
regular intervals within 100 fh +10 fh (tolerance).
(3) If damage is detected on the control rod during the inspection, replace control rod
before the next flight and contact ECD customer support.
(4) Control rod L672M2005207 must be replaced by control rod L672M2006101 within the
next 400 fh + 40 fh (tolerance) after receipt of Revision 03 of this Alert Service Bulletin,
but by August 31, 2011 at the latest. The retrofit is described in SB EC135-67-018.
This document is available on the internet: www.eurocopter.com/techpub
2007-12-13  EC135-67A-017
REVISION 03, 2010-07-26  PAGE 1 of 9

### Page 6 (OCR)

eurocopter  EC135
on AS Cop ALERT SERVICE BULLETIN
EFFECTIVITY Ball pivot 92-201-00.
(1)  Within the next 50 fh after receipt of Revision 02 of this Alert Service Bulletin the
inspection of the ball pivot i.a.w. Section 3.C must be accomplished.
After this, the inspection of the ball pivot i.a.w. Section 3.C must be repeated in regular
intervals within 100 th +10 th (tolerance).
(3)  If damage is detected on the ball pivot during the inspection, replace ball pivot and
control rod L672M2005207 before the next flight and inform ECD customer support.
EFFECTIVITY Ball pivot 92-207-00.
31.05.2008 at the latest.
After this, accomplish inspection of the ball pivot i.a.w. Section, 3.D in regular intervals
within 400 fh +40 fh (tolerance) or together with the 12-MONTH INSPECTION,
depending upon whichever occurs first.
(3) If damage is detected on the ball pivot during the inspection, replace ball pivot and
control rod L672M2005207 before the next flight and inform ECD customer support.
F. Approval
EASA.21J.034.  The technical content of this document is approved under the authority of DOA No.  C1
G. Manpower
H. Weight and Balance  Approx. 3 hours for the inspection of the control rod and the ball pivot.  SB
Not applicable.
Electrical Load Data
Not applicable
J.  Software Accomplishment Summary
Not applicable.
K.  References
AMM EC135, AMM EC135/635.
Other Publications affected
The changes to AMM/MSM EC135 and AMM/MSM EC135/635 which are required as a
result of this Alert Service Bulletin will be incorporated with one of the next revisions.
M. Interchangeability of Parts
Not applicable.
EC135-67A-017  2007-12-13
PAGE 2 of 9  REVISION 03, 2010-07-26

### Page 7 (OCR)

eurocopter  EC135
an EADS Company
ALERT SERVICE BULLETIN
2. Material Information
A. Material - Price and Availability
The required material can be ordered at the Interturbine company.
B. Support Information
Two new locking plates (1, Figure 3) must be used for the installation of the bal pivot. These
locking plates (LN9023B6-1.4544.9) must be ordered seperately at ECD.  Revision
C. Material Necessary for Each Helicopter
EFFECTIVITY Ball pivot 92-201-00.
Retrofit kit SB-135-67A-017-2C.
No.  New P/N  Keyword  /Old P/N  Qty  Disposition
1  Corrosion preventive  compound  -67A￾  a.n.*
(CM 531)
*a.n. = as needed
Disposition:
A = Consumable material, can be ordered at the Interturbine company as needed.
CM number is given in the list of consumable materials contained in the AMM.
D. Material Necessary for Each Spare
Not applicable.
E. Reidentified Parts
Not applicable.
p. Mot apicable.  F. Specfal Tooling
2007-12-13  EC135-67A-017
REVISION 03, 2010-07-26  PAGE 3 of 9

### Page 8 (OCR)

eurocopter  EC135
on AS Comper ALERT SERVICE BULLETIN
3. Accomplishment Instructions
A. Preliminary work steps:
(1) Remove tail rotor drive shaft fairing i.a.w. AMM, 53-50-01, 4-1.
EFFECTIVITY All helicopters without AFCS (Automatic Flight Control System).
B. Check control rod:
(1) Check, whether control rod L672M2005207 (7, Figure 2) is installed. ,
(a) If control rod L672M2005207 (7, Figure 2) is not installed, proceed Na.w. Section
3.C or 3.D of this Alert Service Bulletin.
(b) If control rod L672M2005207 (7, Figure 2) is installed, proceed as follows:
NOTE  The inspection requires a mirror and a flashlight.
(2) Pull control rod (7, Figure 2) until it reaches its end position. Check attachment hardware
of control rod (7) for tight fit and freedom of movement. Manually check that there is no
relative motion possible between control rod (7) and yaw actuator (8).
(3) Check locking plate (9, Figure 2) for tight fit
(4) Accomplish visual inspection of attachment hardware between control rod (7, Figure 2)
and yaw actuator (8) for pecularities.
(5) If pecularities or signs of damage are detected on the control rod (7, Figure 2) during
accomplishment of the inspection, replace damaged components before the next flight
and inform ECD customer support.
(6) Proceed i.a.w. Section 3 Cor 3.D.
EFFECTIVITY  All helidopters with ball pivot 92-201-00.
C. Check and apply ball pivot with corrosion preventive compound:
(1) Bend open locking plates (1, Figure 3), remove screws (2), locking plates (1) and safety
sheet (5). Discard locking plates (1).
Withdraw ball bearing control (3, Figure 3) together with connected yaw actuator (7)
forward from bracket (6), until ball pivot (4) is freely accessible.
(3) Manually move ball pivot (4, Figure 3) to all directions:
(a) If ball pivot (4, Figure 3) can be correctly moved, apply corrosion preventive
compound (CM 531) onto bearing surfaces.
1 Attach safety sheet (5, Figure 3) and ball pivot (4) to bracket (6). While
doing so, place safety sheet (5) with its half-round opening from the tail
rotor drive shaft side onto ball bearing control (3). Torque-tighten screws (2)
to 3-4 Nm and secure with new locking plates (1). Proceed i.a.w.
Section 3.E.
EC135-67A-017  2007-12-13
PAGE 4 of 9  REVISION 03, 2010-07-26

### Page 9 (OCR)

eurocopter  EC135
on As CorALERT SERVICE BULLETIN
(b) If ball pivot (4, Figure 3) cannot be moved and/or signs of damage are detected,
replace ball pivot before the next flight, and apply corrosion preventive
compound (CM 531) onto bearing surfaces of new ball pivot (92-201-00) and
inform ECD customer support. Proceed i.a.w. Section 3.C. (4).
EFFECTIVITY All helicopters with ball pivot 92-201-00 without AFCS.
(4) Check, if control rod L672M2005207 (7, Figure 2) is installed:
(a) If control rod L672M2005207 is installed, replace control rod before the next flight.
Proceed i.a.w. Section 3.E.
EFFECTIVITY All helicopters with ball pivot 92-207-00.  (o) If control rod L672M2005207 is not installed, proceed i.a.w. Section 3.E.  RevIs
D. Check ball pivot:
(1) Bend open locking plates (1, Figure 3), screw (2), locking plates (1) and safety sheet (5).
Discard locking plates (1).
(2) Withdraw ball bearing control (3, Figure 3) together with connected yaw actuator (7)
forward from bracket (6), until ball pivot (4) is freely accessible.
(3) Manually move ball pivot (4, Figure 3) to all directions.
CAUTION  BALL PIVOT 92-207-00 MUST NOT BE TREATED WITH
CORROSION PREVENTIVE COMPOUND NOR GREASE, AS
OTHERWISE THE  TEFLON  COATING APPLIED  BY
MANUFACTURER IS DESTROYED.
(a) If ball pivot 4, Figure 3) can be correctly moved, proceed as follows:
1 Attach safety sheet (5, Figure 3) and ball pivot (4) to bracket (6). While
doing so, place safety sheet (5) with its half-round opening from the tail
Appena  rotor drive shaft side onto ball bearing control (3). Torque-tighten screws (2)  to 3-4 Nm and secure with new locking plates (1). Proceed i.a.w.
Section 3.E.
If ball pivot (4, Figure 3) cannot be moved and/or signs of damage are detected,
replace ball pivot before the next flight and inform ECD customer support. Proceed
i.a.w. Section 3.D. (4).
EFFECTIVITY All helicopters with ball pivot 92-207-00 without AFCS.
(4) Check, if control rod L672M2005207 (7, Figure 2) is installed:
(a) If control rod L672M2005207 is installed, replace control rod before the next flight.
Proceed i.a.w. Section 3.E.
(b) If control rod L672M2005207 is not installed, proceed i.a.w. Section 3.E.
2007-12-13  EC135-67A-017
REVISION 03, 2010-07-26  PAGE 5 of 9

### Page 10 (OCR)

eurocopter  EC135
ontos coper ALERT SERVICE BULLETIN
EFFECTIVITY All helicopters.
E. Conclusive works:
(1) Install tail rotor drive shaft fairing i.a.w. AMM, 53-50-01, 4-1.
Confirm accomplishment of this Alert Service Bulletin by an entry in the historical record of
the helicopter.
4. Appendix  Appendix to SB EC135-67A-017 Revision
Not applicable.
EC135-67A-017  2007-12-13
PAGE 6 of 9  REVISION 03, 2010-07-26

### Page 11 (OCR)

eurocopter  EC135
an EADS Company
ALERT SERVICE BULLETIN
Ball pivot 92-201-00 (black)
Ball pivot 92-207-00 (with bare metal surface)  17 Revision 4
2
1 Balk piyot  92-201-00 1
Ball pivot  92-207-00
Apply corrosion preventive compound (CM 531) onto bearing surfaces.
2 Bearing surfaces MUST NOT be treated with corrosion preventive compound nor grease!
Ball Pivot
Figure 1
2007-12-13  EC135-67A-017
REVISION 03, 2010-07-26  PAGE 7 of 9

### Page 12 (OCR)

eurocopter  EC135
on AoS Comper ALERT SERVICE BULLETIN
1  Input lever of Fenestron actuator
2 Close-tolerance bolt  L635M1021201
3 Rod end bearing  CN6ME-RK
4 Washer  EN2139-06010
5  Nut  MBBN3129-06D
6 Cotter pin  EN2367-10018
7 Control rod  8 Yaw actuator  418-00847-000  L672M2005207  Rèvision 4
9 Locking plate  LN9022-10
135<67A
Control Rod
Figure 2
EC135-67A-017  2007-12-13
PAGE 8 of 9  REVISION 03, 2010-07-26

### Page 13 (OCR)

eurocopter  EC135
an EADS Company
ALERT SERVICE BULLETIN
Ball pivot, without AFCS
2X2  35,67g17 Revisión 4.  1x2
2x2  1X2
1 Locking plate  LN9023B6-1.4544.9
2 Screw
3 Ball bearing control
4 Ball pivot  92-201-00 or
92-207-00/3
5  Safety sheet
6  Bracket
7 Yaw actuator
Only ball pivot 92-201-00 shown.
Apply corrosion preventive compound (CM 531) onto bearing surfaces.
Bearing surfaces MUST NOT be treated with corrosion preventive compound nor grease!
Ball pivot
Figure 3
2007-12-13  EC135-67A-017
REVISION 03, 2010-07-26  PAGE 9 of 9

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
