# Eurocopter Alert Service Bulletin EC135-67A-019

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 3 ("Eurocopter ASB EC135-67A-019 Rev 3"), 14 pages: PDF https://openairdocs.org/files/sha256/17/7d/177ddd846de0cfd8933cc69dd40384c62c28c9271fbb9c82e4c8d4dbb002e688; text https://openairdocs.org/service-documents/airbus-helicopters/ec135-67a019/file/177ddd846de0.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2015-0674; AD 2017-03-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- U.S. DOT/FAA - ASB-EC135-EC635-67-019-Rev3-EN ("U.S. DOT/FAA - ASB-EC135-EC635-67-019-Rev3-EN"), 16 pages: PDF https://openairdocs.org/files/sha256/8b/71/8b7151a5ee583aa42ad08f82eec7c537ac9b498b8715ba0da29f39eabc914bde; text https://openairdocs.org/service-documents/airbus-helicopters/ec135-67a019/file/8b7151a5ee58.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-0555; AD 2014-05-06, 2014-05-06 R1 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md) (issued as Eurocopter)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC135-67A-019
- Latest revision known: EC135-67A-019, Revision 4, dated April 3, 2017 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec135-67a019

## ADs that cite it (3) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2014-05-06 R1](https://openairdocs.org/ad/2014-05-06-R1.md), effective Jan 22, 2019: Revision 3
- [AD 2017-03-01](https://openairdocs.org/ad/2017-03-01.md), effective Mar 31, 2017: Revision 3
- [AD 2014-05-06](https://openairdocs.org/ad/2014-05-06.md), effective Apr 14, 2014: Revision 3

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/airbus-helicopters/ec135-67a019/proposed.md).

## Text (14 pages)

Revision 3, the newest copy. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2015-0674; AD 2017-03-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALERT SERVICE BULLETIN
EC135
EC135-67A-019
PAGE 1 of 14
2008-04-28
REVISION 03, 2009-12-16
Rotor Flight Controls  –  Tail Rotor, Cyclic and Collective Controls  –
Check bearings for correct attachment and retrofit of bushings and
washers
1. Planning Information
A. Effectivity
(1) Helicopters affected: EC135/EC635 all models, excluding S/N 0028.
(2) Components affected: Tail rotor controls:
LH lever L672M2802205
RH lever L672M1012212
Cyclic control:
Lever L671M1005250
Collective Control: 
Lever assy L671M2020108
Plate L671M5040207
(3) Spare parts affected: Tail rotor controls:
LH lever L672M2802205
RH lever L672M1012212
Cyclic control:
Lever L671M1005250
Collective control: 
Lever assy L671M2020108
Plate L671M5040207
B. Concurrent Requirements
Not applicable.
C. Reason
During accomplishment of an inspection on a MBB BK117 C-2, bearings were detected
which had not been correctly bondend. Not properly bonded bearings may cause the
respective lever to shift in the axial direction. Under unfavourable circumstances, the lever
might get into contact with the helicopter structure and thus impair the controls’ freedom of
movement. As the affected bearings of the EC135 are bonded in the same procedure, they
must be checked for correct attachment with this Alert Service Bulletin.
Furthermore, with this Alert Service Bulletin the retrofit of bushings and washers is
described. Thus, the bearings are prevented from shifting in the axial direction.
D. Description
Check attachment of bearings. If necessary, rebond bearings. Retrofit of bushings and
washers.
This document is available on the internet: www.eurocopter .com/techpub

### Page 2

ALERT SERVICE BULLETIN
EC135
EC135-67A-019
PAGE 2 of 14 REVISION 03, 2009-12-16
2008-04-28
E. Compliance
(1) The following deadlines had been set in the first issue of this Alert Service Bulletin:
EFFECTIVITY All EC135 on which no periodical inspection has been accomplished
up to now.
(a) The inspection and the possibly necessary repair of the levers i.a.w. Section 3.B
must be accomplished within the next 50 fh after receipt of this Alert Service
Bulletin, but by 31.05.2008 at the latest.
EFFECTIVITY Helicopters S/N 0005 up to and including S/N 0829 before retrofit of
the washers and bushings i.a.w. Section 3.C.
(b) Check of the bearing in the LVDT plate i.a.w. Section 3.B.(5) must be repeated
together with the periodical inspection or with the 12–month inspection, depending
upon whichever occurs first.
(2) The following deadlines are set for the Revisions 01, 02 and 03 of this Alert Service
Bulletin:
EFFECTIVITY Helicopters S/N 0005 up to and including S/N 0829.
(a) The retrofit of the washers and the bushings must be accomplished within the next
12 months after receipt of Revision 1 of this Alert Service Bulletin i.a.w.
Section 3.C.
EFFECTIVITY Helicopters with washers and bushings i.a.w. Section 3.C.
(b) After the retrofit of the bushings and washers i.a.w. Section 3.C. of this Alert Service
Bulletin, the check of the levers must be repeated with the periodical inspection at
800 Fh or 36 months (what ever comes first).
EFFECTIVITY Inspection after replacement of one of the components given in
Section 1.A.(3) which was delivered before receipt of Revision 3 of
this Alert Service Bulletin.
(c) The replaced component must be inspected i.a.w. Section 3.B not before 10 fh
have been reached but not later than 50 fh after its replacement.
F. Approval
The information or instruction contained in this document refer to change no. 1670. The
technical content of this document is approved under the authority of DOA  No.
EASA.21J.034.
G. Manpower
Approx. 6.5 man–hours for the check.
Approx. 32 man–hours for retrofit of bushings and washers.

### Page 3

ALERT SERVICE BULLETIN
EC135
EC135-67A-019
PAGE 3 of 14
2008-04-28
REVISION 03, 2009-12-16
H. Weight and Balance
Weight: 0.032 kg
Moment: 67.60 kgmm
I. Electrical Load Data
Not applicable.
J. Software Accomplishment Summary
Not applicable.
K. References
AMM EC135 and AMM EC135/635.
L. Other publications affected
The changes to AMM EC135, AMM EC135/635, IPC EC135, IPC EC135/635, MSM EC135
and MSM EC135/635 which are required as a result of this Alert Service Bulletin will be
incorporated with one of the next revisions.
M. Interchangeability of Parts
With accomplishment of Revision 1 of this Alert Service Bulletin the P/Ns of the following
componts change:
Guidance unit RH from L672M1012101 to L672M1012103
from L672M1012102 to L672M1012103
Guidance unit LH from L672M2802101 to L672M2802103
from L672M2802102 to L672M2802103
Cyclic shaft from L671M1005102 to L671M1005104
from L671M1005103 to L671M1005104
2. Material Information
A. Material – Price and Availability
Information on cost and availability of required retrofit kit SB-135-67A-019-2C will be
provided by ECD, Dept. Spares Order Administration on request.
B. Support Information
Not applicable.

### Page 4

ALERT SERVICE BULLETIN
EC135
EC135-67A-019
PAGE 4 of 14 REVISION 03, 2009-12-16
2008-04-28
C. Material Necessary for Each Helicopter
Retrofit kit SB-135-67A-019-2C i.a.w. design documents L671M1005104, L672M2802103,
L670M2003057 and L672M1012103.
No. New P/N Keyword Old P/N Qty Disposition
1 L671M1005260 Washer − 1 A
2 L672M1012260 Bushing − 2 A
3 L221M1042208 Washer − 2 A
4 RSN/C026246 Retaining ring RSN/C026246 1 A, B
Disposition:
A = New, included in kit.
B = Part with old P/N is discarded.
D. Material Necessary for Each Spare
Not applicable.
E. Reidentified Parts
Not applicable.
F. Special Tooling
Not applicable.
3. Accomplishment instructions
A. Preliminary Work Steps:
(1) De–energize helicopter electrical system i.a.w. AMM, 24-00-00, 2-1.
(2) Remove middle cover i.a.w. AMM, 52-40-00, 4-4.
(3) If installed, remove equipment plate i.a.w. AMM, 25-70-00, 4-2.
(4) Remove forward access cover i.a.w. AMM, 52-40-00, 4-3.

### Page 5

ALERT SERVICE BULLETIN
EC135
EC135-67A-019
PAGE 5 of 14
2008-04-28
REVISION 03, 2009-12-16
B. Check bearing for correct attachment:
CAUTION BEFORE STARTING WORK, AFFIX A PLACARD IN THE COCKPIT
WHICH SAYS THAT THE CONTROLS MUST NOT BE MOVED.
OPERATING THE CONTROLS DURING THE CHECK MAY CAUSE
SERIOUS INJURIES.
NOTE The check requires a flashlight and a mirror.
(1) Check bearing in LH guidance unit (Detail A, Figure 2) for correct attachment.
(a) Check, whether bearing (1, Figure 2) is correctly installed in lever (2) as shown in
Section A–A.
(b) Manually check, whether bearing (1) is tightly fitted in lever (2). To do so, manually
try to move lever in axial direction .
(c) If a loose bearing is detected, copy reply form sheet on page 14, fill out and send
to ECD customer support. Rebond bearing i.a.w. AMM, 20-00-00, 2-14.
(2) Check bearing in RH guidance unit (Detail B, Figure 2) for correct attachement.
(a) Check, whether bearing (1, Figure 2) is correctly installed in lever (3) as shown in
Section B–B.
(b) Manually check, whether bearing (1) is tightly fitted in lever (3). To do so, manually
try to move lever (3) in axial direction .
(c) If a loose bearing is detected, copy reply form sheet on page 14, fill out and send
to ECD customer support. Rebond bearing i.a.w. AMM, 20-00-00, 2-14.
(3) Check bearing of cyclic control (Detail C, Figure 3) for correct attachment.
(a) Check, whether bearing (1, Figure 3) is correctly installed in lever (2) as shown in
Section C–C.
(b) Manually check, whether bearing (1, Figure 3) is tightly fitted in lever (2). To do so,
manually try to move lever in axial direction .
(c) If a loose bearing is detected, copy reply form sheet on page 14, fill out and send
to ECD customer support. Rebond bearing i.a.w. AMM, 20-00-00, 2-14.
(4) Check bearing of upper guidance unit (Detail D, Figure 3) for correct attachment.
(a) Check, whether bearing (3, Figure 3) is correctly installed in lever (4) as shown in
Section D–D.
(b) Manually check, whether bearing (3, Figure 3) is tightly fitted in lever (4). To do so,
manually try to move connected forked end in axial direction .

### Page 6

ALERT SERVICE BULLETIN
EC135
EC135-67A-019
PAGE 6 of 14 REVISION 03, 2009-12-16
2008-04-28
(c) If a loose bearing is detected, copy reply form sheet on page 14, fill out and send
to ECD customer support. Rebond bearing i.a.w. AMM, 20-00-00, 2-14.
(5) Check bearing in LVDT plate (Detail E, Figure 4) for correct attachment.
(a) Check, whether bearing (1, Figure 4) is correctly installed in plate (2) as shown in
Section E–E.
(b) Manually check, whether bearing (1, Figure 4) is tightly fitted in plate (2). To do so,
manually try to move plate (2) in axial direction .
(c) If a loose bearing is detected, copy reply form sheet on page 14, fill out and send
to ECD customer support. Rebond bearing i.a.w. AMM, 20-00-00, 2-14.
C. Retrofit of bushings and washers:
(1) Remove LH guidance unit i.aw. AMM, 67-20-00, 4-4.
(2) Disassemble LH guidance unit i.aw. AMM, 67-20-00, 4-5.
(3) Assemble LH guidance unit i.a.w. AMM, 67-20-00, 4-5. While doing so, additionally
install bushing (1, Figure 5) between bearing block (2) and lever (3) (see Detail
A, Figure 5) – notwithstanding the instructions given in the AMM.
(4) Install LH guidance unit i.a.w. AMM, 67-20-00, 4-4.
EFFECTIVITY Helicopters S/N 0005 up to and including S/N 0829 without yaw brake.
(5) Remove RH guidance unit i.a.w. AMM, 67-20-00, 4-4.
(6) Disassemble RH guidance unit i.a.w. AMM, 67-20-00, 4-5.
(7) Assemble RH guidance unit i.a.w. AMM, 67-20-00, 4-5. While doing so, additionally
install bushing (1, Figure 5) between bearing block (4) and lever (5) (see
Detail B, Figure 5) – notwithstanding the instructions given in the AMM.
(8) Install RH guidance unit i.a.w. AMM, 67-20-00, 4-4.
EFFECTIVITY Helicopters S/N 0005 up to and including S/N 0829.
(9) Remove cyclic shaft i.a.w. AMM, 67-11-00, 4-5.
(10) Disassemble the cyclic shaft i.a.w. AMM, 67-11-00, 4-6. While you do so, disassemble
the cyclic shaft only as far as necessary for the retrofit of the washer (2, figure 6).
(11) Assemble cyclic shaft i.a.w. AMM, 67-11-00, 4-6. While doing so, additionally install
washer (2, Figure 6) between bearing block (3) and lever (1) (see Detail C, Figure 6)
– notwithstanding the instructions given in the AMM.
(12) Install cyclic shaft i.a.w. AMM, 67-11-00, 4-5.

### Page 7

ALERT SERVICE BULLETIN
EC135
EC135-67A-019
PAGE 7 of 14
2008-04-28
REVISION 03, 2009-12-16
(13) Remove collective control rod (4, Figure 6) from bellcrank i.a.w. AMM, 67-10-00, 4-2.
While doing so, remove the collective control rod (4) only as far as necessary for the
retrofit of the washers (5).
(14) Install collective control rod (4, Figure 6) at the bellcrank  i.a.w. AMM, 67-10-00, 4 2.
While doing so, additionally install washers (5) between collective control rod (4) and
bellcrank (6) (see Detail D, Figure 6) – notwithstanding the instructions given in the
AMM.
D. Conclusive work:
(1) Accomplish inspection for foreign objects and for foreign matter.
(2) Install forward access cover i.a.w. AMM, 52-40-00, 4-3.
(3) If removed, install equipment plate i.a.w. AMM, 25-70-00, 4-2.
(4) Install middle cover i.a.w. AMM, 52-40-00, 4-4.
E. Confirm accomplishment of this Alert Service Bulletin by an entry in the historical record of
the helicopter.
4. Appendix
Not applicable.

### Page 8 (OCR)

eurocopter  EC135
on AS ComporALERT SERVICE BULLETIN
1 LH guidance unit - Detail A, Figure 2
2 RH guidance unit - Detail B, Figure 2
3 Lever, cyclic control - Detail C, Figure 3
Upper guidance unit - Detail D, Figure 3
• LVDT - Detail E, Figure 4
Arrangement of Levers
Figure 1
EC135-67A-019  2008-04-28
PAGE 8 of 14  REVISION 03, 2009-12-16

### Page 9

ALERT SERVICE BULLETIN
EC135
EC135-67A-019
PAGE 9 of 14
2008-04-28
REVISION 03, 2009-12-16
1 Double grooved ball bearing (bonded) AG12EG81
2 LH lever L672M2802205
3 RH lever L672M1012212
1 2
Lever must free of play in axial direction.
3
Detail A (Overview see Figure 1) Before modification
1
Section
A–A
Detail B (Overview see Figure 1) Before modification
Section
B–B
Detail A and B of Figure 1
Figure 2

### Page 10

ALERT SERVICE BULLETIN
EC135
EC135-67A-019
PAGE 10 of 14 REVISION 03, 2009-12-16
2008-04-28
Detail C and D of Figure 1
Figure 3
1 Double grooved ball bearing AGF12BCE
2 Lever L671M1005250
3 Spherical bearing MBBN3068–06U
4 Collective lever assy L671M2020108
2
Lever must be free of play in axial direction.
Forked lever must be free of play in axial direction.
1
Section
C–C
Detail C (Overview see Figure 1) Before modification
Detail D (see Figure 1) Before modification
Section
D–D
3
4

### Page 11

ALERT SERVICE BULLETIN
EC135
EC135-67A-019
PAGE 11 of 14
2008-04-28
REVISION 03, 2009-12-16
Detail E of Figure 1
Figure 4
1 Spherical bearing LN9367GE6N2
2 Plate L671M5040208
2
Plate (2) must be free of play in axial direction.
1
Section
E–E
Detail E (see Figure 1)

### Page 12

ALERT SERVICE BULLETIN
EC135
EC135-67A-019
PAGE 12 of 14 REVISION 03, 2009-12-16
2008-04-28
1 Bushing L672M1012260
2 Bearing block of LH guidance unit
3 LH lever L672M2802205
4 Bearing block of RH guidance unit
5 RH lever L672M1012212
3
4
Detail A (Overview see Figure 1) After modification
1
Section
A–A
Detail B (Overview see Figure 1) After modification
Section
B–B
Detail A and B of Figure 1
Figure 5
2
5
After modification.
1

### Page 13

ALERT SERVICE BULLETIN
EC135
EC135-67A-019
PAGE 13 of 14
2008-04-28
REVISION 03, 2009-12-16
Detail C and D of Figure 1
Figure 6
1 Lever L671M1005250
2 Washer L671M1005260
3 Bearing block
4 Control rod
5 Washer L221M1042208
6 Bellcrank
2
1
Section
C–C
Detail C (Overview see Figure 1) After modification
3
After modification.1
Detail D (Overview see Figure 1) After modification
4 5 6
4
6

### Page 14

ALERT SERVICE BULLETIN
EC135
EC135-67A-019
PAGE 14 of 14 REVISION 03, 2009-12-16
2008-04-28
Telefax
To
Eurocopter Deutschland GmbH
Customer Support
FAX 0049 906 714111
Address of operator:
Reply form sheet for ASB EC135-67A-019 ”check bearings of correct attachment”
Please completely fill out reply form sheet and send to the given FAX No.
Date:__________          Signature:___________________
P/N*HelicopterS/N:
1
2
3
4
Important data regarding lever
Production order
number ** TT (Fh)
Please copy page! Original page remains in Alert Service Bulletin!
Disposition:
L672M1012212   S01  ECD500
10001397284  07.09.05
*
** Example

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
