# Airbus Helicopters Alert Service Bulletin EC135-67A-031

Copy: No revision named ("Airbus Helicopters ASB EC135-67A-031 Rev 0"), 11 pages: PDF https://openairdocs.org/files/sha256/6f/e8/6fe80577ab22e52769c428b1b66c4541c861e2ea3caf353b6f2d72e971f5a3ec; text https://openairdocs.org/service-documents/airbus-helicopters/ec135-67a031/file/6fe80577ab22.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2019-0293; AD 2021-13-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC135-67A-031
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec135-67a031

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2021-13-05](https://openairdocs.org/ad/2021-13-05.md), effective Aug 11, 2021: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus-helicopters/ec135-67a031/proposed.md).

## Text (11 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2019-0293; AD 2021-13-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-031
Valid for Version(s): T1, T2, T2+, T3, P1, P2, P2+, P3
635 T1, 635 T2+, 635 T3, 635 P2+, 635 P3.
ALERT SERVICE BULLETIN
SUBJECT:  ROTOR FLIGHT CONTROL - Tail Rotor Controls
Retrofit of a Teflon Washer
For the attention of
Revision No.  Date of issue
Revision 0  2017-03-30
Summary:
With this Alert Service Bulletin (ASB), Airbus Helicopters Deutschland (AHD) prescribes the
retrofit of a teflon washer on the tail rotor controls.
Compliance:
AHD considers that compliance with the instructions contained in this ASB is mandatory.
Revision 0, 2017-03-30  PAGE 1 of 11
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-031
1  PLANNING INFORMATION
1.A EFFECTIVITY
1.A.1 Helicopters/installed equipment and parts
EC135 T1, T2, T2+, T3, P1, P2, P2+, P3, 635 T1, 635 T2+, 635 T3, 635 P2+, 635 P3, all
S/N up to 1254 inclusive, except S/N 1235.
The installation of the teflon washer is in serial production from S/N 1255 and up.
Before ASB  After ASB
Teflon washer
1.A.2 Non-installed equipment and parts
Not applicable.
1.B  ASSOCIATED REQUIREMENTS
Not applicable.
1.C  REASON
The tail rotor control features a low clearance between the head of the
close-tolerance bolt and the sheet of the stringer. In order to ensure a sufficient
clearance in case of a loose bearing, this ASB prescribes the retrofit of a teflon
washer between the forked end and the bearing.
1.D  DESCRIPTION
Remove the RH side channel covers. Disconnect the tail rotor control. Reinstall the
tail rotor control including the teflon washer. Install the RH side channel covers.
PAGE 2 of 11  Revision 0, 2017-03-30
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-031
1.E  COMPLIANCE
1.E.1 Compliance at H/C manufacturer level
Helicopters/installed equipment and parts:
The retrofit of the teflon washer on the tail rotor controls must be accomplished
i.a.w. Section 3.B before delivery of the helicopter.
Non-installed equipment and parts:
Not applicable.
1.E.2 Compliance in service
Helicopters/installed equipment and parts:
The retrofit of the teflon washer on the tail rotor controls must be accomplished
i.a.w. Section 3.B not later than by March 31, 2018.
Non-installed equipment and parts:
Not applicable.
1.F  APPROVAL
Approval of modification(s):
The information or instructions contained in this document refer to change no. 4682.
The technical content of this document is approved under the authority of DOA No.
EASA.21J.700.
1.G  MANPOWER
Qualification  Mechanic  Electrician  Pilot  Others
Estimated
approx. 4 h
Man-hours
1.H  WEIGHT AND BALANCE
Not applicable.
POWER CONSUMPTION
Not applicable.
1.J  SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K  REFERENCES
AMM EC135 and AMM EC135/635
Revision 0, 2017-03-30  PAGE 3 of 11
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-031
1.L  OTHER AFFECTED PUBLICATIONS
Publications to be updated:
The changes to AMM EC135, AMM EC135/635 and IPC EC135, IPC EC635 which are
required as a result of this ASB will be incorporated with one of the next revisions.
1.M  INTERCHANGEABILITY OR MIXABILITY OF PARTS
Interchangeability:
Not applicable.
Mixability:
Not applicable.
PAGE 4 of 11  Revision 0, 2017-03-30
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-031
2  MATERIAL INFORMATION
2.A  MATERIAL: PRICE - AVAILABILITY - PROCUREMENT
Information on price and availability of required material kit SB-135-67A-031-2C will
be provided by AHD, Dept. Spares Order Administration on request.
The material kit required will be provided free of cost by AHD only within the time
limits that apply for the compliance (Section 1.E). Material that is ordered outside
the time limits given in the ASB will be charged according to the ruling prices.
2.B  LOGISTIC INFORMATION
Not applicable.
2.C  MATERIAL REQUIRED PER HELICOPTER/COMPONENT
Material kits to be ordered for one helicopter:
Material kit SB-135-67A-031-2C i.a.w. design document L672M2003884.
No.  Keyword  Qty  New P/N  Old P/N  Rem.
1  Teflon washer  1  L221M1042208
2  Nut castellated  MBBN3129-06D
MBBN3129-06D
3  Split pin  EN2367-10018
EN2367-10018
Remark:
A = AHD does not take back parts with old part numbers.
Consumables to be ordered separately:
Products can be ordered from the INTERTURBINE AVIATION LOGISTICS company. The
given CM numbers are i.a.w. the AMM list of consumable materials.
Website: http://www.interturbine.com
Phone: +49.41.91.809.300
AOG: +49.41.91.809.444
NOTE  Respect the safety data sheet of the manufacturer.
No.  Keyword  Qty.  Specification **  Rem.
(approx.)
1  Corrosion preventive  a.n.*  518
paste
2  EP-primer  a.n.*  472
Revision 0, 2017-03-30  PAGE 5 of 11
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-031
NO.  Keyword  Qty.  Specification **  CM  Rem.
(approx.)
Hardener
a.n.*  459
(for CM 472)
4  Thinner  a.n.*  436
(for CM 472)
*a.n. = as needed
** Specification i.a.w. AMM, 01-00-00, 2-1.
2.D  MATERIAL TO BE RETURNED
Not applicable.
PAGE 6 of 11  Revision 0, 2017-03-30
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 7 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-031
ACCOMPLISHMENT INSTRUCTIONS
З.А  GENERAL
Not applicable.
З.В  WORK STEPS
3.B.1 Preliminary steps
1. De-energize the helicopter electrical system i.a.w. AMM, 24-00-00, 2-1.
2. Remove the RH side channel covers i.a.w. AMM, 52-50-00, 4-3.
3.B.2  Disconnection of the tail rotor control
1. Remove the split pin (1, Fig. 1), the castellated nut (2) and the washer (3).
Discard the split pin (1) and the castellated nut (2).
2. Position the bellcrank (7, Fig. 1) and the forked end (4) so that their attachment
holes are aligned with the opening in the forward floor (6).
3. Remove the close-tolerance bolt (5, Fig. 1) and disconnect the forked end (4)
from the bellcrank (7).
А
4
1 Split pin
2 Castellated nut  3
3 Washer  2
4 Forked end
1
5 Close-tolerance bolt
6 Opening forward floor
7 Bellcrank
Disconnection of the tail rotor control
Figure 1
Revision 0, 2017-03-30  PAGE 7 of 11
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 8 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-031
3.B.3 Connection of the tail rotor control
1. Clean the close-tolerance bolt (5, Fig. 2) and apply corrosion preventive paste
(CM 518) (1) onto the shank of the close-tolerance bolt (5).
2. Position the bellcrank (7, Fig. 2) and the forked end (4) so that their attachment
holes are aligned with the opening in the forward floor (6).
3. Position the teflon washer (8, Fig. 2) inside of the forked end (4) and below the
bearing of the bellcrank (7).
Install the close-tolerance bolt (5, Fig. 2) through the opening in the forward
floor (6) and install the washer (3) and a new castellated nut (2).
5. Apply a torque between 3 Nm and 4 Nm to the castellated nut (2, Fig. 2).
6. Safety the castellated nut (2, Fig. 2) with a new split pin (1).
6
5
3 - 4 Nm
1
1 Split pin  EN2367-10018  8
2 Castellated nut  MBBN3129-06D
3 Washer
4 Forked end
5 Close-tolerance bolt /1
6 Opening forward floor
7 Bellcrank
8 Teflon washer  L221M1042208  Corrosion preventive paste (CM 518).
Connection of the tail rotor control
Figure 2
PAGE 8 of 11  Revision 0, 2017-03-30
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 9 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-031
3.B.4  Functional test
Move the pedals through their full travel length. Inspect the clearance between the
head of the close-tolerance bolt and the upper stringer (1, Fig. 3) and the clearance
between the end of the close-tolerance bolt / castellated nut and the lower stringer
_ CAUTION
DO NOT DAMAGE THE BELLCRANK OR FORKED END
WHEN BENDING THE SHEET OF THE STRINGER.
1. If the clearance is less then 1.5 mm at the upper stringer (4, Fig. 3), bend the
affected sheet at the stringer till a minimum clearance of 1.5 mm is achieved.
2. If necessary, establish the surface of the sheet with EP-primer (CM 472, CM 459,
CM 436).
3. If the clearance is less than 1.0 mm at the lower stringer (/½, Fig. 3), contact AHD
customer support for further information.
Clearance to upper and lower stringer
Figure 3
Revision 0, 2017-03-30  PAGE 9 of 11
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 10 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-031
З.В.5  Final steps
1. Remove all tools and other materials and clean the work area.
2. Install the RH side channel covers i.a.w. AMM, 52-50-00, 4-3.
PAGE 10 of 11  Revision 0, 2017-03-30
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 11 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-031
З.С  COMPLIANCE CONFIRMATION
Compliance with this document:
Confirm accomplishment of this ASB by an entry in the historical record of the
helicopter.
3.D  OPERATING AND MAINTENANCE INSTRUCTIONS
Operating instructions:
Not applicable.
Maintenance instructions:
Not applicable.
4  APPENDIX
Not applicable.
Revision 0, 2017-03-30  PAGE 11 of 11
This document is available on the internet: www.airbushelicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
