# Airbus Helicopters Alert Service Bulletin EC135-67A-033

Copy: No revision named ("Airbus Helicopters ASB EC135-67A-033 Rev 0"), 12 pages: PDF https://openairdocs.org/files/sha256/bd/7b/bd7b7d22e078acc7a52b7fe13276d4e0e9976d18ec5079899872045289589c97; text https://openairdocs.org/service-documents/airbus-helicopters/ec135-67a033/file/bd7b7d22e078.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0199, the docket of AD 2021-11-17. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC135-67A-033
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec135-67a033

## Text (12 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0199, the docket of AD 2021-11-17. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-033
Valid for Version(s): T1, T2, T2+, T3, P1, P2, P2+, P3
635 T1, 635 12+, 635 13, 635 P2+, 635 P3
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE
ROTOR FLIGHT CONTROL - Main Rotor Actuator
One-time visual inspection of the main rotor actuator
For the attention of
Revision No.  Date of issue
Revision O  2018-11-28
Summary:
Airbus Helicopters Deutschland (AHD) was informed about a cracked nut on the piston of a main
rotor actuator (MRA). With this Alert Service Bulletin (ASB), AHD prescribes a fleet-wide
one-time visual inspection and replacement if necessary.
Compliance:
Compliance with this ASB is mandatory.
Revision 0, 2018-11-28  PAGE 1 of 12
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-033
1  PLANNING INFORMATION
1.A EFFECTIVITY
1.A.1 Helicopters/installed equipment and parts
a) ЕC135 T1, T2, T2+, T3, P1, P2, P2+, P3, 635 T1, 635 T2+, 635 T3, 635 P2+, 635 PЗ,
all S/N.
b) Main rotor actuator, all P/N, all S/N.
Nut
1.A.2 Non-installed equipment and parts
Main rotor actuator P/N L673M20A1005, all S/N
Main rotor actuator P/N L673M30A2011, all S/N
Main rotor actuator P/N E673M30A2001, all S/N
Longitudinal axis  P/N  L673M20A1008, all S/N
Longitudinal axis  P/N  L673M30A2111, all S/N
Collective axis  P/N  L673M20A1012, all S/N
Collective axis  P/N  L673M30A1211, all S/N
Collective axis  P/N  E673M30A1201, all S/N
Lateral axis  P/N  L673M20A1011, all S/N
Lateral axis  P/N L673M30A2311, all S/N
1.B  ASSOCIATED REQUIREMENTS
None.
PAGE 2 of 12  Revision 0, 2018-11-28
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-033
1.C  REASON
AHD was informed of increased control forces in the collective axis in flight. The post
flight inspection revealed that a nut on the piston of the MRA had cracked and was
displaced. The cause for the cracking of the nut is still under investigation.
As a precautionary measure and analysis of the fleet a one-time visual inspection of
the nuts on the pistons of the MRA is introduced with this ASB. Feedback on the
compliance of this ASB is required.
1.D  DESCRIPTION
Visual inspection of the nuts on the pistons of the MRA for cracks, damage, black
coloring and corrosion.
Revision 0, 2018-11-28  PAGE 3 of 12
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-033
1.E  COMPLIANCE
1.E.1 Compliance at H/C manufacturer level
Helicopters/installed equipment and parts:
Not affected.
Non-installed equipment and parts:
Inspect MRA with more than 0 Fh (TSN/TSO) in accordance with Section 3.B.2 before
delivery but within the next 3 months after receipt of this ASB at the latest.
1.E.2  Compliance in service
Helicopters/installed equipment and parts:
Inspect the MRA in accordance with Section 3.B within the next 50 Fh or 3 months
whichever occurs first after receipt of this ASB.
In case of findings (Nuts - NOT OK) report to AHD and wait for feedback from AHD
before the next flight with the affected MRA.
Non-installed equipment and parts:
Inspect MRA with more than 0 Fh (TSN/TSO) in accordance with Section 3.B.2 before
installation in the helicopter but within the next 3 months after receipt of this ASB at
the latest.
1.F  APPROVAL
Approval of this document:
The technical content of this document is approved under the authority of
DOA No. EASA.21J.700.
1.G  MANPOWER
Qualification  Mechanic  Electrician  Pilot  Others
Estimated
approx. 1 h
Man-hours
1.H  WEIGHT AND BALANCE
No effect on weight and balance.
1.J  POWER CONSUMPTION
Not affected.
1 -J  SOFTWARE UPGRADES/UPDATES
Not changed.
1.K  REFERENCES
AMM EC135, AMM EC135/635
PAGE 4 of 12  Revision 0, 2018-11-28
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-033
1.L  OTHER AFFECTED PUBLICATIONS
Publications already updated:
Not applicable.
Publications to be updated:
Not applicable.
1.M  INTERCHANGEABILITY OR MIXABILITY OF PARTS
Interchangeability:
Not affected.
Mixability:
Not affected.
Revision 0, 2018-11-28  PAGE 5 of 12
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-033
2  MATERIAL INFORMATION
2.A  MATERIAL: PRICE - AVAILABILITY - PROCUREMENT
None.
2.B  LOGISTIC INFORMATION
None.
2.C  MATERIAL REQUIRED PER HELICOPTER/COMPONENT
None.
2.D  MATERIAL TO BE RETURNED
None.
PAGE 6 of 12  Revision 0, 2018-11-28
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 7 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-033
ACCOMPLISHMENT INSTRUCTIONS
З.А  GENERAL
Not applicable.
З.В  WORK STEPS
З.В.1  Preliminary steps
1. De-energize the helicopter electrical system (AMM 24-00-00, 2-1).
2. Affix a placard in the cockpit which says that the controls must not be moved.
3. Remove the transmission fairing (AMM 71-11-00, 4-4).
3.B.2 Procedure
NOTE  The visual inspection requires a flashlight and a mirror. The nuts
must not be removed for the inspection.
1. Visual inspect the nuts (1, Fig. 1) on the pistons of the MRA (2) for cracks,
damage, black coloration and corrosion (for condition refer to Figure 2):
a. If there are no findings, report to AHD with the reply form sheet 4.1 in the
appendix to support.vehicle.ahd@airbus.com and proceed with Section 3.B.3.
b. If there are findings, take a photo of the affected nut and of the MRA and
report to AHD with the reply form sheet 4.2 in the appendix to
support.vehicle.ahd@airbus.com. Wait for feedback from AHD before the
next flight with the affected MRA
Revision 0, 2018-11-28  PAGE 7 of 12
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 8 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-033
VIEW A
B
DETAIL B
1x3
1 Nut
2 Main rotor actuator
Visual inspection MRA
Figure 1
PAGE 8 of 12  Revision 0, 2018-11-28
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 9 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-033
New Nut - OK  Used Nut - OK
slight dark coloration
Used Nut - NOT OK
black coloration and corrosion
NOTE: Other shape and form of the nut depending on manufacturer is possible.
Conditions of nut
Figure 2
Revision 0, 2018-11-28  PAGE 9 of 12
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 10 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-033
З.В.З  Final steps
1. Install the transmission fairing (AMM 71-11-00, 4-4).
2. Remove the placard in the cockpit.
З.С  COMPLIANCE CONFIRMATION
Compliance with this document:
Confirm accomplishment of this ASB by an entry in the historical record of the
helicopter and in the log card of the MRA.
3.D  OPERATING AND MAINTENANCE INSTRUCTIONS
Operating instructions:
None.
Maintenance instructions:
None.
4  APPENDIX
4.A Reply form sheets:
4.A.1 Reply form sheet 4.1 "NO FINDINGS"
4.A.2 Reply form sheet 4.2 "FINDINGS"
PAGE 10 of 12  Revision 0, 2018-11-28
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 11 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-033
Reply form sheet for ASB "Inspection of MRA"
4.1
NO FINDINGS
Nuts - OK
Address of operator:
Helicopter S/N:
Helicopter Flight hours (Fh):
Main rotor actuator S/N:
Send the filled out reply form sheet to:
Airbus Helicopters Deutschland GmbH
Customer Support
email: support.vehicle.ahd@airbus.com
Date:_  Signature:
-OR REPLY VIA QR CODE:--
Revision 0, 2018-11-28  PAGE 11 of 12
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 12 (OCR)

AIRBUS
HELICOPTERS  ASB EC135-67A-033
Reply form sheet for ASB "Inspection of MRA"
4.2
FINDINGS
Nuts - NOT OK
Description:
Photo of nut and MRA attached: L
Address of operator:
Helicopter S/N:
Helicopter Flight hours (Fh):
Main rotor actuator S/N:
Longitudinal axis S/N:  TSN/TSO:
Lateral axis S/N:  TSN/TSO:
Collective axis S/N:  TSN/TSO:
Environmental conditions in which the helicopter is operated:
_ Salty
Desert
Urban
Mountain
Others:
Send the filled out reply form sheet to:
Airbus Helicopters Deutschland GmbH
Customer Support: email: support.vehicle.ahd@airbus.com
Date:  Signature:
-OR REPLY VIA QR CODE:
PAGE 12 of 12  Revision 0, 2018-11-28
This document is available on the internet: www.airbushelicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
