# Airbus Helicopters Alert Service Bulletin EC135-85A-081

Copy: No revision named ("Airbus Helicopters ASB EC135-85A-081 Rev 0"), 19 pages: PDF https://openairdocs.org/files/sha256/0b/21/0b212bd424d38f3964b65a3ebbc078a5918d4f584d98e33c3c3efd33207d7abf; text https://openairdocs.org/service-documents/airbus-helicopters/ec135-85a081/file/0b212bd424d3.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0611, the docket of AD 2021-21-01. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC135-85A-081
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec135-85a081

## Text (19 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0611, the docket of AD 2021-21-01. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS  HELICOPTERS
ASB EC135-85A-081
Valid for Version(s): T1, T2, T2+, T3, P1, P2,
P2+, P3, 635 T1, 635 T2+, 635 T3, 635 P2+,
635 P3
ALERT SERVICE BULLETIN
CORRECTIVE MEASURE
OPTIONAL EQUIPMENT - Rescue Hoist
Modification of the hook assembly
For the attention of
Revision No.  Date of issue
Revision O  2020-10-29
Summary:
With this Alert Service Bulletin (ASB), Airbus Helicopters distributes the Service Bulletin (SB)
44301-10-37 Rev.4 of the Goodrich corporation. It provides instructions for the removal and
replacement of several components of the hook assembly.
Compliance:
It is mandatory to obey this ASB.
Revision 0, 2020-10-29  PAGE 1 of 5
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS  HELICOPTERS
ASB EC135-85A-081
1  PLANNING INFORMATION
1.A  EFFECTIVITY
1.A.1 Helicopters/installed equipment and parts
a) EC135 T1, T2, T2+, T3, P1, P2, P2+, P3, 635 T1, 635 T2+, 635 T3, 635 P2+, 635 P3,
all S/N with optional equipment Goodrich rescue hoist.
b) Affected rescue hoist:
See Goodrich SB 44301-10-37 Rev.4, paragraph 1.A.
Affected hook damper:
See Goodrich SB 44301-10-37 Rev.4, paragraph 1.A.
1.A.2 Non-installed equipment and parts
See Section 1.A.1.b) of this ASB.
1.B  ASSOCIATED REQUIREMENTS
None.
1.C  REASON
With this ASB, Airbus Helicopters distributes the SB 44301-10-37 Rev.4 of the
Goodrich corporation. It provides instructions for the removal and replacement of
several components of the hook assembly.
After accomplishment of this ASB the P/N of the hook damper will be changed and
the repetitive inspection according ASB EC135-85A-069 is no longer applicable.
1.D  DESCRIPTION
See Goodrich SB 44301-10-37 Rev.4, paragraph 1.C.
1.E  COMPLIANCE
1.E.1 Compliance at H/C manufacturer level
Helicopters/installed equipment and parts:
The removal and replacement of several components of the hook assembly must be
accomplished in accordance with Goodrich SB 44301-10-37 Rev.4, paragraph 1.D. by
September 30th, 2021 at the latest.
Non-installed equipment and parts:
See helicopters/installed equipment and parts.
1.E.2  Compliance in service
Helicopters/installed equipment and parts:
The removal and replacement of several components of the hook assembly must be
accomplished in accordance with Goodrich SB 44301-10-37 Rev.4, paragraph 1.D. by
September 30th, 2021 at the latest.
Non-installed equipment and parts:
See helicopters/installed equipment and parts.
PAGE 2 of 5  Revision 0, 2020-10-29
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS  HELICOPTERS
ASB EC135-85A-081
1.F  APPROVAL
Approval of modification (s):
The information or instructions contained in this document refer to change no. 6289.
The technical content of this document is approved by EASA.
1.G  MANPOWER
See Goodrich SB 44301-10-37 Rev.4, paragraph 1.F.
1.H  WEIGHT AND BALANCE
No effect on weight and balance.
1.l  POWER CONSUMPTION
Not affected.
1.J  SOFTWARE UPGRADES/UPDATES
Not changed.
1.K  REFERENCES
CMM 25-00-21-1.
1.L  OTHER AFFECTED PUBLICATIONS
Not affected.
1.M  INTERCHANGEABILITY OR MIXABILITY OF PARTS
Not affected.
Revision 0, 2020-10-29  PAGE 3 of 5
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS  HELICOPTERS
ASB EC135-85A-081
2  MATERIAL INFORMATION
2.A  MATERIAL: PRICE - AVAILABILITY - PROCUREMENT
See Goodrich SB 44301-10-37 Rev.4, paragraph 1.G.
2.B  LOGISTIC INFORMATION
See Goodrich SB 44301-10-37 Rev.4, paragraph 2.E.
2.C  MATERIAL REQUIRED PER HELICOPTER/COMPONENT
Material kits to be ordered for one helicopter or one assembly:
See Goodrich SB 44301-10-37 Rev.4, paragraph 1.G.
Special tools:
See Goodrich SB 44301-10-37 Rev.4, paragraph 1.H.
2.D  MATERIAL TO BE RETURNED
None.
PAGE 4 of 5  Revision 0, 2020-10-29
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS  HELICOPTERS
ASB EC135-85A-081
ACCOMPLISHMENT INSTRUCTIONS
З.А  GENERAL
Obey the "General recommendations for Working at helicopter" (AMM 03-10-02,
2-1).
З.В  WORK STEPS
3.В.1  Procedure
See Goodrich SB 44301-10-37 Rev.4, paragraph 2.A. and 2.B.
3.В.2  Tests
For the functional test see Goodrich SB 44301-10-37 Rev.4, paragraph 2.C.
З.С  COMPLIANCE CONFIRMATION
Compliance with this document:
Record full compliance with this ASB, with the revision number, in the helicopter
documents.
Record full compliance with this ASB, with the revision number, in the log card of the
equipment (if a log card exists).
Identification of modifications on equipment or parts:
See Goodrich SB 44301-10-37 Rev.4, paragraph 2.D.
Please confirm compliance with this ASB:
QR-Code or hypertext link
NOTE
The recording of compliance with ASB in the R-Tex
tool does not replace the recording in the helicopter
documents
ASB EC135-85A-081
3.D  OPERATING AND MAINTENANCE INSTRUCTIONS
None.
4  APPENDIX
SB 44301-10-37 Rev.4 of the Goodrich corporation.
Revision 0, 2020-10-29  PAGE 5 of 5
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 6

(No text on this page.)

### Page 7 (OCR)

GOODRICH
SERVICE BULLETIN
Equipment/Furnishings - Rescue Hoist - Hook Modification
TO: HOLDERS OF SERVICE BULLETIN 44301-10-37 REVISION 3, DATED APR 16/19.
REVISION NO. 4, DATED FEB 26/20
HIGHLIGHTS
This Service Bulletin has been revised. Highlights of this revision are included below, and change bars
have been included, indicating areas of change. Please destroy your obsolete copy of this service
Bulletin and replace it with Revision No. 4 dated Feb 26/20.
PAGE NO.  DESCRIPTION OF CHANGE  EFFECTIVITY
1  Table 1. Hoist Effectivity updated to Serial Number,  All
and Note added for Table 1.
2  Compliance Paragraph 1.D updated.  All
2  Manpower Paragraph 1.F.(2). work performance,  All
authorized personnel updated.
3  Paragraph 1.G. (3) (a). Material availability updated  All
4  Paragraph 1.H. (2). Tooling requirement updated.  All
10  Figure 3. Dimensions added for local manufacturing  All
option for Service Bulletin Label.
Highlights-1
Warning - This information contains technical data subject to EAR ECCN: 9E991  44301-10-37 Feb 26/20  Rev 4

### Page 8 (OCR)

GOODRICH
SERVICE BULLETIN
Equipment/Furnishings - Rescue Hoist - Hook Modification
THIS PAGE IS INTENTIONALLY LEFT BLANK
Highlights-2
Warning - This information contains technical data subject to EAR ECCN: 9E991  44301-10-37 Feb 26/20  Rev 4

### Page 9 (OCR)

GOODRICH
SERVICE BULLETIN
Equipment/Furnishings - Rescue Hoist - Hook Modification
1. Planning Information
A. Effectivity
This Service Bulletin is applicable to the Goodrich Rescue Hoists defined in Table 1.
Table 1. Effectivity
HOIST  ORIGINAL HOOK  NEW
HOIST  SERIAL NUMBER  DAMPER  HOOK DAMPER
PART NUMBER  EFFECTIVITY  (FOR REFERENCE)  (FOR REFERENCE)
44301-10-2  44301-420  44301-425-103
44301-10-5  44301-420  44301-425-103
44301-10-6  44301-420  44301-425-103
44301-10-10  *41314 or lower  44301-423  44301-425
44301-10-11  44301-423  44301-425
44301-10-12  44301-423  44301-425
44301-10-13  44301-423  44301-425
NOTE: * A "4" in the leading digit of the serial number indicates hoist has a POP 2 clutch
installed (refer to SB 44301-10-23). For the effectivity of this SB the leading digit is
irrelevant (i.e. OXXXX is the same as 4XXXX).
B. Reason
To increase the level of safety in the hook assembly and reduce the chance that the hook
assembly can separate from the hoist cable. This will be accomplished by the replacement
of parts internal to the hook assembly.
C. Description
It was observed that a hook separated from the cable. This was caused by a dual failure;
an internal retaining ring failed and the elastomeric energy absorber (the bumper) took a
compression set. The retaining ring can corrode in a salt-laden environment.
This Service Bulletin provides instructions for the removal and replacement of several
components of the hook assemblies. The existing cable split retainers and retainer ring are
replaced with newly designed cable retainer and other parts are modified to further prevent
separation of the hook from the cable.
Page 1 of 11
44301-10-37  Feb 26/20
Warning - This information contains technical data subject to EAR ECCN: 9E991  Rev 4

### Page 10 (OCR)

GOODRICH
SERVICE BULLETIN
Equipment/Furnishings - Rescue Hoist - Hook Modification
D. Compliance
Incorporation of this Service Bulletin is mandatory for all hoists listed on Table 1. This
Service Bulletin is to be done by the Operator at Level 1 Organizational Maintenance or for
all hoists listed and are undergoing Level 2 Intermediate or Level 3 Depot Maintenance.
This Service Bulletin shall be done no later than September 30th, 2021.
E. Approval
This Service Bulletin contains no modification information that revises the approved
configuration. The work performed is in compliance with the existing FAA/EASA approved
configuration.
F. Manpower
(1) The estimated amount of labor to accomplish the instructions of this Service Bulletin
is 30 minutes, as follows:
Table 2. Estimated Labor
TASK  TIME (MIN)
Disassembly  10
Assembly  20
(2) The modification work described in this Service Bulletin may be performed by the
Hoist Operator (Organizational Level maintenance), Goodrich Corporation, or by
personnel and facilities authorized by Goodrich Corporation to perform Intermediate,
or Depot Level maintenance.
Page 2 of 11
Warning - This information contains technical data subject to EAR ECCN: 9E991  44301-10-37 Feb 26/20  Rev 4

### Page 11 (OCR)

GOODRICH
SERVICE BULLETIN
Equipment/Furnishings - Rescue Hoist - Hook Modification
G. Material - Cost and Availability
(1) The following parts are required to accomplish the instructions of this Service Bulletin:
Table 3. Required Parts
INSTRUCTIONS/
NEW P/N  QTY  DESCRIPTION  OLD P/N  DISPOSITION
44307-496  Cable Retainer, Slotted  42305-286  Replace
44301-416  1  Cap, Seal  42277-284  Replace
44301-415  1  Disc, Lower  44301-403  Replace
N/A  N/A  Ring, Retaining  MS16625-4075  Discard
MS28775-023  1  O-ring  MS28775-023  Replace
SBL44301-10-37  1  Service Bulletin Label  IN/A  Install on Rescue
Hoist Assembly
after SB
incorporation
These items are available in kit SBK44301-10-37
(2) The following material is required to accomplish the instructions of this Service
Bulletin:
Table 4. Required Materials
PART NUMBER/
DESCRIPTION  SPECIFICATION  QTY  SOURCE
Lithium Based Grease  630-AA  AR  Lubriplate (Cage Code 83747)
(3) Material Availability
(a) Parts required for the implementation of this Service Bulletin will be provided by
Goodrich Corporation free of charge.
(b) As-required materials must be supplied by the Operator/facility performing the
modification.
(4) Warranted Items Costs
(a) Replaced parts under this service bulletin will carry a one (1) year warranty after
installation.
Page 3 of 11
Warning - This information contains technical data subject to EAR ECCN: 9E991  44301-10-37  Feb 26/20  Rev 4

### Page 12 (OCR)

GOODRICH
SERVICE BULLETIN
Equipment/Furnishings - Rescue Hoist - Hook Modification
H. Tooling - Price and Availability
(1) The required tooling to accomplish this Service Bulletin are as follows:
Table 5. Required Tooling
PART NUMBER/
DESCRIPTION  SPECIFICATION  SOURCE
Disassembly Tool  T44301-400PU1  Goodrich Corporation (3HRL4)
This item is available in kit SBK44301-10-37
(2) Tooling required for the implementation of this Service Bulletin will be provided by
Goodrich Corporation free of charge.
Weight and Balance
Not affected.
J. Electrical Load Data
Not affected.
K. Software Accomplishment Summary
Not applicable.
Reference
CMM 25-00-21-1
CMM 25-60-30-2
CMM 25-60-30-3
M. Other Publications Affected
None
Page 4 of 11
Warning - This information contains technical data subject to EAR ECCN: 9E991  44301-10-37 Feb 26/20  Rev 4

### Page 13 (OCR)

GOODRICH
SERVICE BULLETIN
Equipment/Furnishings - Rescue Hoist - Hook Modification
2. Accomplishment Instructions
A. Disassembly of Cable Hook Assembly (Refer to Figure 1, Sheet 1)
(1) To avoid possible inadvertent operation, electrically disconnect the cable cutter assembly.
(2) Apply power to the hoist and use the Control Pendant to reel out the cable
approximately 3 ft (1 m). Remove power from the hoist.
(3) Remove the hook assembly (90) by removing the carrier lock spring (5) and
unscrewing the carrier (10) from the cable hook retainer (15). Set aside.
NOTE: The hook nut and ball bearing (30) may remain assembled to the hook
assembly (90).
(4) Push the hoist cable into the hook damper assembly and remove the seal cap (40)
with o-ring (45). Discard the seal cap (40) and o-ring (45).
(5) Remove and discard the retaining ring (MS16625-4075).
(6) Continue to push the hoist cable into and through the hook damper assembly to
release the two split cable retainers (42305-286). Remove and discard the two split
cable retainers. Remove and retain the spherical seat retainer (65).
(7) Remove the hook damper assembly from the cable.
(8) Remove retaining ring (70).
(9) Remove the compression spacer (75) by gently tapping with a soft suitable drift or flat
head screwdriver through the hook end of the energy absorbing cylinder (85).
Page 5 of 11
Warning - This information contains technical data subject to EAR ECCN: 9E991  44301-10-37 Feb 26/20  Rev 4

### Page 14 (OCR)

GOODRICH
SERVICE BULLETIN
Equipment/Furnishings - Rescue Hoist - Hook Modification
- 70
→ 75
_ 80
_ 95
_ 45
_ 40
15
85
30
_55
90
65
SPLIT CABLE
RETAINERS
(42305-286)
RETAINING RING
(MS16625-4075)
Figure 1. Hook Assembly P/N 44301-420, -423 (Original Configuration) (Sheet 1 of 2)
Page 6 of 11
Warning - This information contains technical data subject to EAR ECCN: 9E991  44301-10-37 Feb 26/20  Rev 4

### Page 15 (OCR)

GOODRICH
SERVICE BULLETIN
Equipment/Furnishings - Rescue Hoist - Hook Modification
70
75
80
95
15
45
40
30
85  10
90
_ 55
- 65
. 60
Figure 1. Hook Assembly P/N 44301-425 (Revised Configuration) (Sheet 2 of 2)
Page 7 of 11
Warning - This information contains technical data subject to EAR ECCN: 9E991  44301-10-37 Feb 26/20  Rev 4

### Page 16 (OCR)

GOODRICH
SERVICE BULLETIN
Equipment/Furnishings - Rescue Hoist - Hook Modification
(10) Place the Disassembly Tool, part number T44301-400PU1, on the upper disc (80) and
apply pressure, using a press or similar method, to compress the energy absorbing
cylinder (85). Continue to apply pressure until the inner cylinder of the disassembly
tool engages with the three tangs of the cable hook retainer (15). Refer to Figure 2.
Outer Cup
T44301-400PU1
Inner Cylinder
. Upper Disc (80)
Float
Assembly (95)
• YES  Cable Hook  Lower Disc  Energy Absorbing
Retainer (15)  (55)  Cylinder (85)
NO
CAUTION: APPLY PRESSURE ONLY WITH THE CABLE HOOK RETAINER (15)
SUPPORTED. DO NOT APPLY PRESSURE AGAINST THE FLOAT
ASSEMBLY (95) OR DAMAGE WILL OCCUR.
Figure 2. Application of Disassembly Tool T44301-400PU1
(11) Release pressure and remove the outer cup of the Disassembly Tool, part number
T44301-400PU1.
(12) Push the cable hook retainer (15) down through the lower disc (55) and remove it.
Page 8 of 11
Warning - This information contains technical data subject to EAR ECCN: 9E991  44301-10-37 Feb 26/20  Rev 4

### Page 17 (OCR)

GOODRICH
SERVICE BULLETIN
Equipment/Furnishings - Rescue Hoist - Hook Modification
CAUTION: THE ENERGY ABSORBING CYLINDER IS SEATED IN THE FLANGE OF
THE LOWER AND UPPER DISCS. TO AVOID DAMAGE TO THE ENERGY
ABSORBING CYLINDER, EXERCISE CARE WHEN REMOVING THE
LOWER AND UPPER DISCS.
(13) To prevent damage, install a protective metal plate or similar object on top of the float
assembly (95). Carefully pry the upper disc (80) from the energy absorbing cylinder
(85). Remove the float assembly (95).
(14) Carefully pry the original lower disc (55) from the energy absorbing cylinder (85).
Discard the lower disc (55).
B. Assembly of Cable Hook Assembly (Refer to Figure 1, Sheet 2)
(1) Press the new lower disc part number 44301-415 (55) into the energy absorbing
cylinder (85).
(2) Place the float assembly (95) onto the energy absorbing cylinder (85). Press the
upper disc (80) into the energy absorbing cylinder (85).
(3)  Install the cable hook retainer (15) through the slots in the lower disc (55) and apply
pressure to engage the fingers in the upper disc (80).
(4) Visually inspect the retaining ring (70) to verify there are no cracks or corrosion. Install
the compression spacer (75) and secure with retaining ring (70).
(5) Install the assembled energy absorbing cylinder (85) over the rescue hoist cable.
Install the spherical seat retainer (65) over the rescue hoist cable and into the lower
disc (55). Install the new slotted cable retainer part number 44307-496 (60) around
the ball end of the rescue hoist cable, and pull the rescue hoist cable into the hook
damper assembly.
Install a new o-ring part number MS28775-023 (45) around the new seal cap part
number 44301-416 (40). Install the new seal cap (40) into the new lower disc (55).
(8) Apply a thin coating of lithium based grease, 630-AA, to the outer race of ball bearing
(30).
(9) Install the hook assembly (90) into the hook damper assembly. Assemble and tighten
the carrier (10) into the cable hook retainer (15). Make sure the two slots in the carrier
(10) align with the slots in the cable hook retainer (15).
(10) Visually inspect the carrier lock spring (5) to verify there are no cracks or corrosion.
Secure the assembly by installing the carrier lock spring (5).
(11) Apply power to the hoist and reel in the hook to the home position (Refer to applicable
CMM). Remove power from the hoist.
Page 9 of 11
Warning - This information contains technical data subject to EAR ECCN: 9E991  44301-10-37  Feb 26/20  Rev 4

### Page 18 (OCR)

GOODRICH
SERVICE BULLETIN
Equipment/Furnishings - Rescue Hoist - Hook Modification
C. Functional Check
(1) If the modification was performed in the field:
(a) Do a check of the homing load per the ASSEMBLY section of CMM 25-00-21-1.
(b) Verify the integrity of the hook assembly by doing a cable conditioning lift per the
ASSEMBLY section of CMM 25-00-21-1.
(2) If the modification was performed at an Intermediate or Depot level facility: Do a
functional test per the TESTING AND FAULT ISOLATION section of CMM 25-60-30-2
or 25-60-30-3.
D. Marking
(1) Mark service bulletin label, part number SBL44301-10-37 (see Figure 3), with current
date and attach to the Rescue Hoist, adjacent to the identification plate.
1.50 ‡ .03 in (38.1 ‡ .76 mm)
SB 44301-10-37
.50 ‡ .03 in
(12.7 ‡ .76 mm)  DATE: [
4X R
.06 ‡ .03 in
(1.5 ‡ .76 mm)
NOTE: MAKE FROM .007 INCH THICK ACRYLATE (MATTE BLACK
ON WHITE) WITH ADHESIVE BACK
[RECOMMEND MAKE FROM 3M #7847 MATTE BLACK/WHITE
ACRYLATE (STOCK # 70-0004-3110-9)]
MAY BE PRODUCED USING LASER MARKING.
NOTE: CHARACTERS ARE TO BE IN CONTRASTING COLOR.
CHARACTER HEIGHTS AND LOCATIONS TO BE
APPROXIMATELY AS SHOWN. BOX FOR DATE TO BE SOLID
FOR HAND WRITTEN DATE AT TIME OF INSTALLATION.
Figure 3. Service Bulletin Label
Page 10 of 11
Warning - This information contains technical data subject to EAR ECCN: 9E991  44301-10-37 Feb 26/20  Rev 4

### Page 19 (OCR)

GOODRICH
SERVICE BULLETIN
Equipment/Furnishings - Rescue Hoist - Hook Modification
(2) Verify the lower disc is marked with new part number 44301-415 (see Figure 4).
Visibility of this part number marking identifies that the hook damper assembly has
been modified to the new configuration.
VERIFY
44301-415
PART NUMBER
MARKING
Figure 4. Lower Disc Part Number Marking
(3)  Document performance of this modification on the hoist log card and/or maintenance
records.
E. Point of Contact
(1) To receive the Service Bulletin Kit, please include the Rescue Hoist part number and
serial number on your purchase order when submitting your request to Customer
Account Management.
For more information about incorporation of this Service Bulletin, contact Goodrich
Corporation at the following:
Goodrich Corporation, Customer Account Management
Sensors and Integrated Systems
2727 E Imperial Highway
Brea, California 92821
Phone: 714-984-1461
FAX: 714-984-1675
Email: GPUTASGoodrichCS@utas.utc.com
Page 11 of 11
Warning - This information contains technical data subject to EAR ECCN: 9E991  44301-10-37 Feb 26/20  Rev 4

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
