# Airbus Helicopters Alert Service Bulletin EC155-05A033

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- No revision named ("Airbus Helicopters ASB EC155-05A033 Revision 0"), 9 pages: PDF https://openairdocs.org/files/sha256/0d/3a/0d3afc0ec9cf2a6529ebc55b693a0cc0e161b05838a9cedb818c6f30ea8349ff; text https://openairdocs.org/service-documents/airbus-helicopters/ec155-05a033/file/0d3afc0ec9cf.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2018-0384; AD 2018-19-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- No revision named ("ASB EC155-05A033 R1"), 10 pages: PDF https://openairdocs.org/files/sha256/88/8f/888fa5916824112444a57a5f4eb1e97dd18358b0478f79b4a59a7e022464a3d7; text https://openairdocs.org/service-documents/airbus-helicopters/ec155-05a033/file/888fa5916824.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1018, the docket of AD 2021-02-08. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC155-05A033
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec155-05a033

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2018-19-01](https://openairdocs.org/ad/2018-19-01.md), effective Oct 22, 2018: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus-helicopters/ec155-05a033/proposed.md).

## Text (9 pages)

No revision named, the newest copy. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2018-0384; AD 2018-19-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-05A033
Civil version(s): B, B1
ALERT SERVICE BULLETIN
SUBJECT: TIME LIMITS - MAINTENANCE CHECKS - Baggage compartment
Inspection of the baggage compartment skin
For the attention of
Revision No.  Date of issue
Revision 0  2017-07-21
Summary:
This ALERT SERVICE BULLETIN consists in:
- performing a tapping inspection of the baggage compartment external skin within 110 flying hours,
Then,
- performing a periodic visual inspection of the baggage compartment external skin every 110 flying hours,
- performing a periodic tapping inspection of the baggage compartment external skin every 660 flying hours.
Compliance:
Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
Revision 0 2017-07-21  Page 1/9
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-05A033
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
All helicopters.
1.A.2. Non-installed equipment or parts
Not applicable.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Airbus Helicopters has been informed of several cases of debonding of the baggage compartment skin.
These observations were made during the 600-FH inspection of the structure on EC155 helicopters.
The possible causes, which are still under investigation, are the heat of the exhaust gas released by the
exhaust pipes and certain climatic conditions (high heat and high humidity).
Consequently, Airbus Helicopters introduces a periodic (visual and tapping) inspection of the area.
Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
1.D. DESCRIPTION
Compliance with this ALERT SERVICE BULLETIN consists in:
- performing a tapping inspection of the baggage compartment external skin,
Then,
- performing a periodic visual inspection of the baggage compartment external skin,
- performing a periodic tapping inspection of the baggage compartment external skin.
Revision 0 2017-07-21  Page 2/9
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-05A033
1.E. COMPLIANCE
The work on the helicopter is to be performed by the operator.
1.E.1. Compliance at H/C manufacturer level
Not applicable.
1.E.2. Compliance in service
1.E.2.a. Helicopters/installed equipment or parts
Perform a tapping inspection of the skin as per paragraphs 3.B.1. and 3.B.2. within 110 flying hours
following receipt of this ALERT SERVICE BULLETIN, issued on the date indicated at the bottom of the
page.
Interpretation of the results
- If no debonding of the external skin is detected:
• perform a visual inspection every 110 flying hours as per paragraphs 3.B.1. and 3.B.3.,
And,
. perform a tapping inspection every 660 flying hours as per paragraph 3.B.1. and 3.B.2.
- If the debonded surface(s) delimited by tapping is/are located in only one square of 10 × 10 cm
(3.94 x 3.94 in) or less (see Figure 2):
. report the size and location to the Airbus Helicopters Customer Support Department:
- Fax: + 33 (0)4.42.85.99.66
- E-mail: Airframe.Technical-Support@airbus.com
- Keycopter: Technical Request Management
• then, perform a tapping inspection every 110 flying hours as per paragraphs 3.B.1. and 3.B.2.
- In all other cases of debonding and before resuming flights:
. contact the Airbus Helicopters Customer Support Department to obtain a suitable repair solution through
an RDAS (Repair Design Approval Sheet) by:
- Fax: + 33 (0)4.42.85.99.66
- E-mail: Airframe.Technical-Support@airbus.com
- Keycopter: Technical Request Management
1.E.2.b. Non-installed equipment or parts
Not applicable.
1.F. APPROVAL
Approval of modifications:
Not applicable.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on July 21, 2017 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
Revision 0 2017-07-21  Page 3/9
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-05A033
1.G. MANPOWER
For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following
personnel qualification:
Qualification: 1 Airframe Technician qualified for tapping inspections.
The time for the operations is given for information purposes, for a standard configuration.
Time for the operations: - (approximately) 1 hour and 30 minutes to comply with paragraph 3.B.2. on one
side,
- (approximately) 10 minutes to comply with paragraph 3.B.3. on one side.
1.H. WEIGHT AND BALANCE
Not applicable.
1.I. POWER CONSUMPTION
Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K. REFERENCES
The documents required for compliance with this ALERT SERVICE BULLETIN are as follows:
Standard Practices Manual (MTC):
Work Card: 20.03.06.601: Structural repairs - Assembled components check
Work Card: 20.60.00.432: Blade standard practices - Audio control procedure by blade tapping
1.L. OTHER AFFECTED PUBLICATIONS
Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Not applicable.
Revision 0 2017-07-21  Page 4/9
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-05A033
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
For any information concerning the kits and/or components or for assistance, contact the Airbus Helicopters
Network Sales & Customer Relations Department.
Airbus Helicopters
Etablissement de Marignane
Direction Ventes et Relations Client
13725 MARIGNANE CEDEX
FRANCE
NOTE 1
On the purchase order, please specify the mode of
transport, the destination and the serial numbers of the
helicopters to be modified.
NOTE 2
For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F
Fax: +33 (0)4.42.85.99.96.
2.B. LOGISTIC INFORMATION
Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Consumables to be ordered separately:
Refer to the Work Cards referenced in this ALERT SERVICE BULLETIN.
The consumables can be ordered separately from KLX AEROSPACE SOLUTIONS.
Website:  https://www.klxaerospace.com/klxaero/
Telephone:  +1.305.925.2600
AOG:  +1.305.471.8888
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision 0 2017-07-21  Page 5/9
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-05A033
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
Not applicable.
3.B. WORK STEPS
3.B.1. Preliminary steps
- Install the access equipment.
- Remove and/or open any cowlings, panels, doors and equipment required to gain access to the different
work areas.
- If necessary, remove the thermal protection.
3.B.2. Tapping inspection of the baggage compartment external skin (Figure 1)
- Perform a tapping inspection of the external skin located between frames X4630 and X6630 (see Figure 1)
as per MTC Work Cards 20.03.06.601 and 20.60.00.432.
NOTE 1
The tapping inspection is to be carried out on sections of
3 cm (1.18 in) maximum, along the X and Z axes.
NOTE 2
The skin must be clean for this inspection.
- Interpret the results as per paragraph 1.E.2.a.
- Then comply with paragraph 3.B.4.
3.B.3. Visual inspection of the baggage compartment external skin (Figure 1)
- Perform a visual inspection of the baggage compartment external skin between frames X4630 and X6630
(see Figure 1) using low-angled light (e.g. LED bar):
NOTE 3
The skin must be clean for this inspection.
. in the event of distortion, wrinkling or corrosion: comply with paragraph 3.B.2.,
• otherwise, comply with paragraph 3.B.4.
3.B.4. Final steps
- Remove the access equipment.
- Install and/or close any cowlings, panels, doors and equipment removed and/or opened during the
preliminary steps (paragraph 3.B.1.).
- If necessary, install the thermal protection.
Revision 0 2017-07-21  Page 6/9
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 7 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-05A033
3.C. COMPLIANCE CONFIRMATION
Compliance with this document:
Record first compliance with this ALERT SERVICE BULLETIN, with the revision number, in the helicopter
documents.
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Revision 0 2017-07-21  Page 7/9
This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 8 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-05A033
— Area to be inspected
Areas to be inspected:
LH and RH skin
X4630
X6630
Figure 1: Delimitation of the areas to be inspected
Revision 0 2017-07-21  Page 8/9
This document is available on the internet: www.a  copters.com/techpub/

### Page 9 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-05A033
Only one square of 10 x 10 cm
(3.94 x 3.94 in.) or less
Example of
acceptable debonding
Debonded surfaces
Examples of
unacceptable debonding
Square of 10 x 10 cm
(3.94 × 3.94 in.) or less, but
straddling two skin panels
Debonded surfaces
Square greater than 10 × 10 cm
(3.94 × 3.94 in.)
Figure 2: Examples of debonded surfaces
Revision 0 2017-07-21  Page 9/9
This document is available on the internet: www.airbushelicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
