# Eurocopter Alert Service Bulletin EC155-25A114

Copy: Revision 1 ("Eurocopter ASB No  EC-155-25A114 R1"), 15 pages: PDF https://openairdocs.org/files/sha256/48/6f/486f37cb779abc7bc450410b718f6cf7cd90cd1e2cec6bfc0a303d93834bcac4; text https://openairdocs.org/service-documents/airbus-helicopters/ec155-25a114/file/486f37cb779a.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-0480; AD 2013-19-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md) (issued as Eurocopter)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC155-25A114
- Latest revision known: EC155-25A114, Revision 1, dated August 9, 2012 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec155-25a114

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2013-19-07](https://openairdocs.org/ad/2013-19-07.md), effective Nov 6, 2013: Revision 1

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus-helicopters/ec155-25a114/proposed.md).

## Text (15 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-0480; AD 2013-19-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC155-25A114
Civil version(s): B, B1
ALERT SERVICE BULLETIN
SUBJECT: EQUIPMENT AND FURNISHINGS - Pilot and co-pilot seats
Inspection of the rear beam of the seat
For the attention of
Revision No.  Date of issue
Revision 0  2012-05-14
Revision 1  2012-08-09
Summary:
The purpose of this ALERT SERVICE BULLETIN is to check that there are weld beads on the rear beam of the
pilot and co-pilot seats.
Reason for last Revision:
The purpose of the last revision is to replace in the appendix EADS SOGERMA Inspection Service Bulletin
No. 2510106-25-888 Revision 0 with EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888
Revision 1, which requires an additional check of all welds of the rear beam of the seats.
Compliance:
Compliance with this ALERT SERVICE BULLETIN is mandatory.
Revision 0 2012-05-14  Page 1/15
Revision 1 2012-08-09  This document is available on the internet: www.eurocopter.com/techpub

### Page 2 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC155-25A114
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment
On helicopters equipped with pilot and co-pilot seats part number (MP/N) 2510106-03-00
or 2510106-06-00 with serial number (S/N) between 720 (inclusive) and 1451 (inclusive) and on which
compliance with EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 Revision 1 has not been
ensured.
1.A.2. Non-installed equipment
On pilot and co-pilot seats part number (MP/N) 2510106-03-00 or 2510106-06-00 with S/N between
720 (inclusive) and 1451 (inclusive) and on which compliance with EADS SOGERMA Inspection Service
Bulletin No. 2510106-25-888 Revision 1 has not been ensured.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Revision 0:
During a maintenance inspection, it was found that a weld bead was missing on the rear beam of a seat.
This non-conformity, if not detected and corrected, could lead to crew injury in case of helicopter hard
landing.
EADS SOGERMA requires that the pilot and co-pilot seats be inspected to make sure that there is a weld
bead on the rear beam of the seat.
This inspection is necessary to make sure that the seats are serviceable and comply with the flight safety
rules.
Consequently, EUROCOPTER renders compliance with EADS SOGERMA Inspection Service Bulletin
No. 2510106-25-888 mandatory, through this ALERT SERVICE BULLETIN Revision O.
This ALERT SERVICE BULLETIN Revision O will form the subject of an EASA Airworthiness Directive.
Revision 1:
During compliance with Revision 0 of this ALERT SERVICE BULLETIN, it was found that a weld bead was
missing on another part of the rear beam.
This non-conformity, if not detected and corrected, could lead to flight crew injury in case of helicopter hard
landing.
The purpose of the last revision is to replace in the appendix EADS SOGERMA Inspection Service Bulletin
No. 2510106-25-888 Revision O with EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888
Revision 1, which requires an additional check of all welds of the rear beam of the seats.
The purpose of Revision 1 of EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 is to add
intormation to the operating procedure and to add photos showing new areas to be checked.
Revision 1 affects compliance with Revision 0 of this ALERT SERVICE BULLETIN.
Revision 0 2012-05-14  Page 2/15
Revision 1 2012-08-09  This document is available on the internet: www  eurocopter.com/techpub

### Page 3 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC155-25A114
1.D. DESCRIPTION
Compliance with this ALERT SERVICE BULLETIN Revision 1 consists in extending the check for the weld
bead to the whole of the rear beam of the seat in accordance with EADS SOGERMA Inspection Service
Bulletin No. 2510106-25-888 Revision 1.
1.E. COMPLIANCE
1.E.1. Compliance at the works
Helicopters/installed equipment:
Comply with paragraph 3. of this ALERT SERVICE BULLETIN before delivery.
Non-installed equipment:
Comply with paragraph 3.B. before delivery.
1.E.2. Compliance in service
The work on the helicopter is to be performed by the operator.
Helicopters/installed equipment:
- Comply with paragraph 3. of this ALERT SERVICE BULLETIN within 50 flying hours or 3 months, the first
limit reached is applicable, following receipt of this ALERT SERVICE BULLETIN Revision 1, issued on the
date indicated at the bottom of the page.
- If a weld bead is missing, according to the location, replace the beam or the seat within 50 flying hours or 3
months, the first limit reached is applicable, following receipt of this ALERT SERVICE BULLETIN
Revision 1, issued on the date indicated at the bottom of the page.
NOTE
In order to have sufficient time to replace a seat if
necessary, before reaching 50 flying hours or 3 months,
EUROCOPTER recommends that you perform the check at
the first opportunity, in order to inform SOGERMA as quickly
as possible of any non-compliance of the seat, if any.
Non-installed equipment:
Comply with paragraph 3.B. before installation on the helicopter, without exceeding 3 months following
receipt of this ALERT SERVICE BULLETIN Revision 1, issued on the date indicated at the bottom of the
page.
If the weld bead is missing, the installation of this seat is prohibited.
Revision 0 2012-05-14  Page 3/15
Revision 1 2012-08-09  This document is available on the internet: www.eurocopter.com/techpub

### Page 4 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC155-25A114
1.F. APPROVAL
Approval of modifications:
Not applicable.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision O was approved
on May 11, 2012 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of
civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved
on August 09, 2012 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters
of civil versions subject to an Airworthiness Certificate.
1.G. MANPOWER
EUROCOPTER recommends that compliance with this ALERT SERVICE BULLETIN is ensured by
personnel qualified as follows:
Qualification: - 1 Mechanical Engineering Technician.
The time for the operations is given for information purposes, for a standard configuration.
Time for the operations: Approximately 10 minutes to perform the check in accordance with paragraph 1.G.
of the appended EADS SOGERMA Inspection Service Bulletin
No. 2510106-25-888 Revision 1.
Approximately 1 hour to replace a seat.
1.H. WEIGHT AND BALANCE
Not applicable.
Revision 0 2012-05-14  Page 4/15
Revision 1 2012-08-09  This document is available on the internet: www.eurocopter.com/techpub

### Page 5 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC155-25A114
1.I. EFFECT ON ELECTRICAL LOADS
Not applicable.
1.J. _ SOFTWARE MODIFICATION EMBODIMENT RECORD
Not applicable.
1.K. REFERENCES
Refer to paragraph 1.J. of the appended EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888
Revision 1.
1.L. DOCUMENTS AFFECTED
Not applicable.
1.M. INTERCHANGEABILITY OR MIXABILITY OF PARTS
Not applicable.
Revision 0 2012-05-14  Page 5/15
Revision 1 2012-08-09  This document is available on the internet: www.eurocopter.com/techpub

### Page 6 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC155-25A114
2. MATERIAL INFORMATION
2.A. MATERIAL: PRICE - AVAILABILITY - PROCUREMENT
Refer to paragraph 2.A. of the appended EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888
Revision 1.
2.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT
Not applicable.
2.C. MATERIAL REQUIRED FOR EACH HELICOPTER/COMPONENT
Refer to paragraph 2.C. of the appended EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888
Revision 1.
2.D. MATERIAL TO BE RETURNED
Return the material to the following address:
EADS SOGERMA
Z.I. de l'arsenal
BP.60109
17303 ROCHEFORT CEDEX
France
Tel: +33 (0)5.46.82.84.84
Fax: +33 (0)5.46.82.88.13
Revision 0 2012-05-14  Page 6/15
Revision 1 2012-08-09  This document is available on the internet: www.eurocopter.com/techpub

### Page 7 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC155-25A114
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
Not applicable.
3.B. OPERATIONAL PROCEDURE
Comply with paragraph 3. of the appended EADS SOGERMA Inspection Service Bulletin
No. 2510106-25-888 Revision 1.
3.C. IDENTIFICATION
Identification of this document:
Record compliance with this ALERT SERVICE BULLETIN Revision 1 in the helicopter documents.
Identification of modifications on the equipment:
- If ALERT SERVICE BULLETIN Revision 0 was already applied, add "REV 1" at the end of
"ISB 2510106-25-888 applied".
- If ALERT SERVICE BULLETIN Revision O was not applied, comply with paragraph C.IDENTIFICATION of
appended EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 Revision 1.
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
4. APPENDIX
Appended EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 Revision 1 in English.
Revision 0 2012-05-14  Page 7/15
Revision 1 2012-08-09  This document is available on the internet: www.eurocopter.com/techpub

### Page 8 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC155-25A114
EADS SOGERMA (F4643) z.l. de l'arsenal
CS. 60109 - 17303 ROCHEFORT CEDEX - FRANCE
TEL : 33.5.46.82.84.84 - SITA Code : RCOSSCR
FAX : 33.5.46.82.88.13
INSPECTION SERVICE BULLETIN
TITLE : EQUIPMENT/FURNISHINGS - COCKPIT SEAT - INSPECTION OF REAR
BEAM ASSY
1. PLANNING INFORMATION
A. EFFECTIVITY
This service bulletin is applicable to cockpit seats P/N:
2510106-03-00 2510106-06-00
delivered from S/N 720 (included) to S/N 1451 (included).
B. CONCURRENT REQUIREMENTS
None.
C. REASON
(1) History
During a maintenance inspection, a seat was found with a missing welding bead
on the rear beam.
(2) Objective/Action
EADS SOGERMA informs the operators that an inspection of seats must be done
in order to check the rear beam welding.
(3) Advantages
The inspection requires no specific tool, not much time but is necessary to assure
that the seats are serviceable and respect the flight safety rules.
D. DESCRIPTION
This Service Bulletin gives instructions to:
- Check the rear beam welding.
- Identify the inspection.
E. APPLICATION
(1) Classification
- Mandatory
F. APPROVAL
The technical information contained in this Manufacturer's Service Bulletin has been
approved by Eurocopter under the prerogatives awarded by the EASA Design
Organization Approval No.21J.056 only for the EUROCOPTER helicopter range
concerned.
INITIAL ISSUE : MAR 22/12  SB 2510106-25-888
PAGE : 1 of 8
This document is EADS SOGERMA property and can't be copied or transmitted without authorization.
Appendix
Revision 0 2012-05-14  Page 8/15
Revision 1 2012-08-09  This document is available on the internet: www.eurocopter.com/techpub

### Page 9 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC155-25A114
EADS SOGERMA (F4643) z.l. de l'arsenal
CS. 60109 - 17303 ROCHEFORT CEDEX - FRANCE
TEL : 33.5.46.82.84.84 - SITA Code : RCOSSCR
FAX: 33.5.46.82.88.13
INSPECTION SERVICE BULLETIN
G. MANPOWER
1 fitter/mechanic
Approximate time: 10 minutes
H. WEIGHT AND BALANCE
None.
1. DATA ON ELECTRICAL LOAD ANALYSIS
None.
J. REFERENCES
- EADS SOGERMA CMM: 25-19-97
K. OTHER DOCUMENTS CONCERNED
None.
L. INTERCHANGEABILITY OF PARTS
None.
2. INFORMATION ON MATERIAL
A. MATERIAL - COST AND AVAILABILITY
Replacement part or return to service condition is on charge to SOGERMA
B. NECESSARY MATERIAL FOR EACH EQUIPMENT
None
C. TOOLING
Current tooling,
A mirror.
INITIAL ISSUE: MAR 22/12  SB 2510106-25-888
PAGE : 2
This document is EADS SOGERMA property and can't be copied or transmitted without authorization.
Appendix
Revision 0 2012-05-14  Page 9/15
Revision 1 2012-08-09  This document is available on the internet: www.eurocopter.com/techpub

### Page 10 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC155-25A114
EADS SOGERMA (F4643) z.l. de l'arsenal
CS. 60109 - 17303 ROCHEFORT CEDÉX - FRANCE
TEL : 33.5.46.82.84.84 - SITA Code : RCOSSCR
FAX: 33.5.46.82.88.13
INSPECTION SERVICE BULLETIN
3. OPERATING INSTRUCTIONS
A. PRELIMINARY STEPS
The work of this Service Bulletin can be done in a repair workshop or in the
helicopter.
Take CMM 25-19-97 for help.
B. OPERATING PROCEDURE
(1) Inspection of the rear beam, refer to Fig. 1
(a) Check that all weld beads, showed with an arrow, are present on the rear
beam.
You can use a mirror to see the weld beads if the seat is installed in the
helicopter.
Whatever the seat condition, please fill up the SB report sheet and advise
EADS Sogerma of seat status by e-mail.
In case of missing weld bead, two solutions apply:
- Either order a new beam 2510106601-00 on FOC basis and install it on
seat in accordance with CMM 25-19-97.
- Or return affected seat assembly to EADS Sogerma shops in order to have
the defective beam replaced.
Whatever the solution, a FOC PO or a repair order issue shall be requested
from the customer.
INITIAL ISSUE: MAR 22/12  SB 2510106-25-888
Revision No 1 : JUL 16/12  PAGE: 3
This document is EADS SOGERMA property and can't be copied or transmitted without authorization.
Appendix
Revision 0 2012-05-14  Page 10/15
Revision 1 2012-08-09  This document is available on the internet: www.eurocopter.com/techpub

### Page 11 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC155-25A114
EADS SOGERMA (F4643) z.l. de l'arsenal
CS. 60109 - 17303 ROCHEFORT CEDEX - FRANCE
TEL : 33.5.46.82.84.84 - SITA Code : RCOSSCR
FAX : 33.5.46.82.88.13
INSPECTION SERVICE BULLETIN
See view D
RH outside
See view E
RH inside
See view B
LH inside
See view A
LH outside  >
INSPECTION OF THE REAR BEAM
FIGURE 1 (SHEET 1 OF 3)
INITIAL ISSUE: MAR 22/12  SB 2510106-25-888
Revision No 1 : JUL 16/12  PAGE: 4
This document is EADS SOGERMA property and can't be copied or transmitted without authorization.
Appendix
Revision 0 2012-05-14  Page 11/15
Revision 1 2012-08-09  This document is available on the internet: www.eurocopter.com/techpub

### Page 12 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC155-25A114
EADS SOGERMA (F4643) z.l. de l'arsenal
CS. 60109 - 17303 ROCHEFORT CEDEX - FRANCE
TEL: 33.5.46.82.84.84 - SITA Code : RCOSSCR
FAX: 33.5.46.82.88.13
INSPECTION SERVICE BULLETIN
Weld bead
View A
LH outside
View C
(Parts disassembled only for clarity)
View B
LH inside
Example of fault
Missing weld bead
found on a rear beam
INSPECTION OF THE REAR BEAM
FIGURE 1 (SHEET 2 OF 3)
INITIAL ISSUE: MAR 22/12  SB 2510106-25-888
Revision No 1 : JUL 16/12  PAGE: 5
This document is EADS SOGERMA property and can't be copied or transmitted without authorization.
Appendix
Revision 0 2012-05-14  Page 12/15
Revision 1 2012-08-09  This document is available on the internet: www.eurocopter.com/techpub

### Page 13 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC155-25A114
EADS SOGERMA (F4643) z.l. de l'arsenal
CS. 60109 - 17303 ROCHEFORT CEDEX - FRANCE
TEL : 33.5.46.82.84.84 - SITA Code : RCOSSCR
FAX: 33.5.46.82.88.13
INSPECTION SERVICE BULLETIN
Weld bead
View D
RH outside
View F
(Parts disassembled only for clarity)
View E
RH inside
Example of fault
Missing weld bead
found on a rear beam
INSPECTION OF THE REAR BEAM
FIGURE 1 (SHEET 3 OF 3)
INITIAL ISSUE: MAR 22/12  SB 2510106-25-888
Revision No 1 : JUL 16/12  PAGE: 6
This document is EADS SOGERMA property and can't be copied or transmitted without authorization.
Appendix
Revision 0 2012-05-14  Page 13/15
Revision 1 2012-08-09  This document is available on the internet: www.eurocopter.com/techpub

### Page 14 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC155-25A114
EADS SOGERMA (F4643) z.I. de l'arsenal
CS. 60109 - 17303 ROCHEFORT CEDEX - FRANCE
TEL: 33.5.46.82.84.84 - SITA Code : RCOSSCR
FAX: 33.5.46.82.88.13
INSPECTION SERVICE BULLETIN
C. IDENTIFICATION
(1) Write, with an indelible ink pencil, on the identification plate the application of this
Inspection Service Bulletin if the seat is SERVICEABLE.
- Write "ISB 2510106-25-888 Rev 1 applied"
View A
SB 2510106-25-888
Rev 1 applied
SOGERMA
F4543
ISB 2510106-25-888 Rey 1 Appled
AV 9G
DES  EN 0F2 153
According to
Q.A.C.
CMS  704A 41 1200 83  T.S.O.
MADE IN FRANCE
CMS
IDENTIFICATION PLATE
IDENTIFICATION
FIGURE 2
INITIAL ISSUE: MAR 22/12  SB 2510106-25-888
Revision No 1 : JUL 16/12  PAGE: 7
This document is EADS SOGERMA property and can't be copied or transmitted without authorization.
Appendix
Revision 0 2012-05-14  Page 14/15
Revision 1 2012-08-09  This document is available on the internet: www.eurocopter.com/techpub

### Page 15 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC155-25A114
EADS SOGERMA (F4643) z.l. de l'arsenal
CS. 60109 - 17303 ROCHEFORT CEDEX - FRANCE
TEL : 33.5.46.82.84.84 - SITA Code : RCOSSCRI
FAX: 33.5.46.82.88.13
INSPECTION SERVICE BULLETIN
4. INSPECTION REPORT SHEET
After application of ISB 2510106-25-888, please send us back, by E-mail, a copy duly
completed of this Inspection Report Sheet.
(1) Helicopter
Customer:  Helicopter model:  Helicopter MSN:
(2) Cockpit seat
Serviceable /
P/N of Seat  Seat S/N
unserviceable
2510106-_-.
2510106-_-
(3) Please, date, sign and send to:
EADS SOGERMA  Person in charge
Mr Alain CANIVET  of SB application
Product Support Department
Z.I DE L'ARSENAL- C.S.60109
17303 ROCHEFORT CEDEX
FRANCE
Fax : 33.5.46.82.88.13
E-mail: alain.canivet@sogerma.eads.net
INITIAL ISSUE : MAR 22/12  SB 2510106-25-888
Revision No 1 : JUL 16/12  PAGE : 8
This document is EADS SOGERMA property and can't be copied or transmitted without authorization.
Appendix
Revision 0 2012-05-14  Page 15/15
Revision 1 2012-08-09  This document is available on the internet: www.eurocopter.com/techpub

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
