# Airbus Helicopters Alert Service Bulletin EC155-34A037

Copy: No revision named ("Airbus ASB No EC155-34A037 Rev 0 (IBR)"), 12 pages: PDF https://openairdocs.org/files/sha256/af/52/af527fb193fd0daa4db1772fd351d058915551cd4d8ead0ae71cfd2a59b1f515; text https://openairdocs.org/service-documents/airbus-helicopters/ec155-34a037/file/af527fb193fd.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2019-1099; AD 2020-15-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC155-34A037
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec155-34a037

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2020-15-01](https://openairdocs.org/ad/2020-15-01.md), effective Aug 17, 2020: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus-helicopters/ec155-34a037/proposed.md).

## Text (12 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2019-1099; AD 2020-15-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS
HELICOPTERS  SB No. EC155-34A037
Civil version(s): B
ALERT SERVICE BULLETIN
CORRECTIVE MEASURE
NAVIGATION - Attitude and Heading Reference System (AHRS)
Connection modification on connector "11 ALPHA" (AHRS)
Corresponds to modifications 0722B51 and 365A084754.00
For the attention of
Revision No.  Date of issue
Revision 0  2018-02-19
Summary:
The purpose of this ALERT SERVICE BULLETIN is to correct the connections of the primary reference system
"Attitude and Heading Reference System (AHRS)" by modifying the connection of connector "11 ALPHA".
Compliance:
Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
Revision 0 2018-02-19  Page 1/12
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS
HELICOPTERS  SB No. EC155-34A037
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
Helicopters equipped with the Automatic Pilot (AP):
- PRE MOD 0722B51 (Segregation of flight/ground information for the automatic pilot system),
- PRE MOD 365A084754.00 ("11 ALPHA" connection modification).
NOTE
Refer to the aircraft Individual Inspection Log Book (RIC
AMS) and the aircraft Log Book to identify the actual
modification status of the helicopter.
1.A.2. Non-installed equipment or parts
Not applicable.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
During a test flight for troubleshooting, it was found that there was a difference between the attitude
indications delivered by the AHRS systems and displayed by the pilot's and copilot's PFD (Primary Flight
Display) and the stand-by horizon during fast helicopter movements in curves.
This indicating difference is due to a wiring anomaly in the FLIGHT/GROUND logic of the FLIGHT/GROUND
condition management board, as the AHRS systems have a different dynamic depending on the FLIGHT or
GROUND condition of the helicopter.
The analysis of this incident showed that the AHRS systems received the FLIGHT/GROUND signal from the
same landing gear position sensor although each AHRS must receive information from different sources to
prevent erroneous vertical speed and attitude displays on both PFDs. When there is no segregation in the
FLIGHT/GROUND information acquisition, this also affects the FCDS (Flight Control Display System), which
is composed of the FCDM (Flight Control Display Module) and SMD45 flight control screens.
To prevent any common mode in the acquisition of FLIGHT/GROUND information used by the AHRS
systems, the FCDS, the flight data recorder and the Automatic Pilot (AP), Airbus Helicopters has developed
the following modifications:
- 0722B51, which consists in changing the wiring to make sure that the "FLIGHT" information from the LH
landing gear is used by the Automatic Pilot (AP) system.
- 365A084754.00, which consists in re-allocating the electronic board output connections by modifying the
connection on connector "11 ALPHA".
Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
Revision 0 2018-02-19  Page 2/12
This document is available on the Internet: www.airbu  shelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS
HELICOPTERS  SB No. EC155-34A037
1.D. DESCRIPTION
This ALERT SERVICE BULLETIN consists in:
- removing the Pelican rack equipment,
- modifying the wiring (corresponds to modification 0722B51),
- modifying the connections (corresponds to modification 365A084754.00),
- installing the Pelican rack equipment again,
- performing the associated tests,
- performing a flight test of the Automatic Pilot (AP).
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Helicopters/installed equipment or parts
Modification 0722B51 is embodied on new helicopters since December 31, 2002.
Non-installed equipment or parts
Not applicable.
1.E.2. Compliance in service
The work must be performed on the helicopter by the operator.
Helicopters/installed equipment or parts
Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
Comply with paragraph 3.B. by October 25, 2018 at the latest.
Non-installed equipment or parts
Not applicable.
1.F. APPROVAL
Approval of modifications
The information or instructions relate to modification 0722B51, which was approved on July 03, 2002 under
the authority of DGAC No. F.JA01 for civil version helicopters subject to an Airworthiness Certificate.
The information or instructions relate to modification 365A084754.00, which was approved
on July 17, 2017 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
Approval of this document
The technical information contained in this ALERT SERVICE BULLETIN No. 34A037 Revision 0 was
approved on February 19, 2018 under the authority of EASA Design Organization Approval No. 21J.700 for
civil version helicopters subject to an Airworthiness Certificate.
Revision 0 2018-02-19  Page 3/12
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS
HELICOPTERS  SB No. EC155-34A037
1.G. MANPOWER
For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following
personnel qualifications:
Qualifications:  - 1 Electrical Engineering Technician,
- 1 Avionics Technician.
The time for the operations is indicated for reference purposes only and based on a standard helicopter
configuration.
Time for the operations:  - approximately 4 hours for the Electrical Engineering Technician,
- approximately 3 hours for the Avionics Technician (including the lifting of the
helicopter on jacks).
Estimated helicopter downtime is indicated for reference purposes only, based on a standard helicopter
configuration.
Helicopter downtime is estimated at approximately 1 day.
1.H. WEIGHT AND BALANCE
Not applicable.
1.I. POWER CONSUMPTION
Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K. REFERENCES
The documents required for compliance with this ALERT SERVICE BULLETIN are as follows:
Aircraft Maintenance Manual (AMM)
AMM: 07-10-00-581: Lifting the Helicopter on Jacks - Lifting and Shoring
AMM: 22-10-00-741: Built-In Test - Autopilot System
AMM: 24-00-00-911: Electrical Power - General instructions
AMM: 24-00-00-481: Power Supply - Electrical Power Systems
AMM: 34-00-00-911: General Safety Instructions - Navigation System
AMM: 34-23-00-721: Functional Tests - Primary Reference System
AMM: 34-70-05-062: Removal / Installation - Pelican Rack Card
Standard Practices Manual (MTC)
MTC: 20.07.01.201: Handling of helicopters in a hangar and in a prepared area
MTC: 20.07.02.201: Helicopter parked in a repair shop
MTC: 20.07.03.406: Instructions applicable when working on an aircraft electrical circuit and power
generating systems - Technical instructions
MTC: 20.07.03.408: Appearance checks on an aircraft after an inspection or repair
MTC: 20.80.20.101: Contact insertion and extraction method and tools
MTC: 20.80.20.441: Installation of electrical cable bundles and optical fibers
Revision 0 2018-02-19  Page 4/12
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS
HELICOPTERS  SB No. EC155-34A037
1.L. OTHER AFFECTED PUBLICATIONS
The modifications will be integrated into the following manuals:
- Wiring Diagram Manual (WDM),
- Special Index Modification (SIM).
The documents concerned will be updated in one of the next revisions.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Not applicable.
Revision 0 2018-02-19  Page 5/12
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS
HELICOPTERS  SB No. EC155-34A037
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
For any information concerning the modification kits and/or components or for assistance, contact the Sales
and Customer Relations Department.
Airbus Helicopters
Etablissement de Marignane
Direction Ventes et Relations Client
13725 MARIGNANE CEDEX
FRANCE
NOTE 1
On the purchase order, please always specify the mode of
transport, the destination and the numbers of the helicopters
to be modified.
NOTE 2
For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F
Fax: +33 (0)4.42.85.99.96.
2.B. LOGISTIC INFORMATION
Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Consumables to be ordered separately
As per Work Cards and Tasks given in this ALERT SERVICE BULLETIN.
The consumables can be ordered separately from KLX AEROSPACE SOLUTIONS.
Website:  https://www.klxaerospace.com/klxaero/
Telephone:  +1.305.925.2600
AOG:  +1.305.471.8888
Special tools
As per Work Cards and Tasks given in this ALERT SERVICE BULLETIN.
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision 0 2018-02-19  Page 6/12
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 7 (OCR)

AIRBUS
HELICOPTERS  SB No. EC155-34A037
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- Read and comply with the instructions for handling helicopters parked in a repair shop as per MTC Work
Card 20.07.01.201.
- Read and comply with the instructions concerning contact insertion and extraction method and tools as per
MTC Work Card 20.80.20.101.
- Read and comply with the instructions for installing electrical cable bundles as per MTC Work
Card 20.80.20.441.
3.B. WORK STEPS
CAUTION
BEFORE  STARTING ANY WORK ON THE
ELECTRICAL SYSTEMS, READ TASK 24-00-00-911.
CAUTION
BEFORE STARTING ANY WORK ON THE
NAVIGATION SYSTEMS, READ TASK 34-00-00-911.
3.B.1. Preliminary steps
- Park the helicopter in a maintenance shop as per MTC Work Card 20.07.02.201.
- Install appropriate access equipment.
- Disconnect all electrical power supplies.
- Remove equipment and furnishings to allow adequate access to the various work areas.
3.B.2. Procedure
As per Figure 1
- Open the radome to access unit "11 ALPHA" (a).
- Remove the Pelican rack equipment as per AMM Task 34-70-05-062.
3.B.2.a. Wiring modification (corresponds to modification 0722B51) (Figure 1)
As per Figure 1
- Disconnect connector "11ALP2-DP1" (b) from unit "11 ALPHA" (a) (Detail A).
- Modify the wiring on connector "11 ALPHA" as per Figure 1.
- Perform a continuity test of the modified wiring.
- Connect connector "11ALP2-DP1" (b) to unit "11 ALPHA" (a) (Detail A).
3.B.2.b. Connection modification (corresponds to modification 365A084754.00) (Figure 2)
As per Figure 2
- Modify the wiring on connector "11 ALPHA" as per Figure 2.
- Perform a continuity test of the modified wiring.
- Install the Pelican rack equipment as per AMM Task 34-70-05-062.
- Close the radome.
Revision 0 2018-02-19  Page 7/12
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 8 (OCR)

AIRBUS
HELICOPTERS  SB No. EC155-34A037
3.B.3. Tests
CAUTION
- DO NOT ACTIVATE THE AUTOMATIC PILOT,
- DO NOT  PRESSURIZE THE HYDRAULIC
SYSTEMS,
- ALWAYS SECURE THE HELICOPTER ON THE
GROUND WITH JACKS.
- Set the helicopter into test condition.
- Connect all electrical power supplies again.
- Energize the helicopter electrical power systems.
- Perform the "tests after FLIGHT/GROUND wiring modification on the main landing gear shock struts" as
per Appendix 4.A.
- Perform the functional tests of the primary reference system as per AMM Task 34-23-00-721.
- Perform the automatic pilot built-in test as per AMM Task 22-10-00-741.
- Set the helicopter to flight condition.
3.B.4. Final steps
- Perform an appearance check of the helicopter after inspection or repair as per MTC Work
Card 20.07.03.408.
- Install and/or close all cowlings, panels, doors and equipment removed and/or opened during preliminary
steps (paragraph 3.B.1.).
- Remove the access equipment.
3.B.5. Ground run-up/flight test
Check the correct operation of the automatic pilot in flight.
3.C. COMPLIANCE CONFIRMATION
Compliance with this document
Record compliance with this ALERT SERVICE BULLETIN No. 34A037 Revision 0 in the helicopter
documents.
Tracking of modifications in the documentation
Record embodiment of modifications 0722B51 and 365A084754.00 in the helicopter documents.
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Revision 0 2018-02-19  Page 8/12
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 9 (OCR)

AIRBUS
HELICOPTERS  SB No. EC155-34A037
PRE MOD 07.22B51  POST MOD 07.22B51
10DEL33-AP1  11ALP2.DP1  - 11ALP2  10DEL33-AP1  11ALP2.DP1  _ 11ALP2._
2UW34E  2UW34E
VOL 4 HI  VOL 8 HI
B  2UW35E  VOL 4 LO  2UW35E  8  VOL 8 LO
N  2UW38E  VOL 8 HI  N  2UW38E  VOL 4 HI
P  2UW39E  VOL 8 LO  P  2UW39E  VOL 4 LO
Figure 1
Revision 0 2018-02-19  Page 9/12
This document is available on the Internet: www  elicopters.com/techpub/

### Page 10 (OCR)

AIRBUS
HELICOPTERS  SB No. EC155-34A037
POST MOD 07.22B51 AND PRE MOD 365A084754.00
11ALP2-CP1
11DEL33 - BP1
11 ALPHA  -1UW22E.
VOL 1  2  - 1UW25NE  19ALP - J3
- 1FF4E
VOL 5  1FF45NE  45N - 4  11DEL33 - AP1
7  1UW28E
VOL 7  1UW29E
11ALP2-DP1  10DEL32 - BP1
- 2UW22E
VOL 2  2N-30G
2  • 2UW25NE.  20ALP - J3
5  - 2FF4E _
VOL 6  . 2FF45NE.  44N - 4  • E
POST MOD 07.22B51 AND POST MOD 365A084754.00
11ALP2-CP1  11DEL33 - BP1
-1UW22E
VOL 5  • 1W25NE  1N -30 H  19ALP - J3
_ 1FF4E .  28
VOL 7  • 1FF45NE.  45N - 40 F  11DEL33 - AP1
1  - 1UW28E
VOL 1  . 1UW29E
11ALP2-DP1  10DEL32 - BP1
5  - 2UW22E
VOL 6  2UW25NE  2N - 3  OG  20ALP - J3
1  _ 2FF4E
VOL 2  2FF45NE.  44N - 40 E
Figure 2
Revision 0 2018-02-19  Page 10/12
This document is available on the Internet: www.a  ushelicopters.com/techpub/

### Page 11 (OCR)

AIRBUS
HELICOPTERS  SB No. EC155-34A037
4. APPENDIX
4.A. TEST AFTER FLIGHT/GROUND WIRING MODIFICATION ON THE MAIN LANDING GEAR
SHOCK STRUTS
4.A.1. Preliminary steps
- Energize the helicopter with an external electrical power unit as per Sub-Task 24-00-00-481-002 of
Task 24-00-00-481.
- Make sure that:
. an amber "OFF" indicator light comes on on the "AP" push-button of the APMS control unit,
• the following equipment is energized and initialized: FCDM1, FCDM2, ADC1, CDA 2, AHRS1,
AHRS2, PFD1, PFD2, ICP1 and ICP2.
4.A.2. Procedure
CAUTION
DO NOT ACTIVATE THE AUTOMATIC PILOT.
CAUTION
DO NOT PRESSURIZE THE HYDRAULIC SYSTEM.
- Lift the helicopter on jacks as per Sub-task 07-10-00-581-001 of Task 07-10-00-581.
- Disconnect connectors "9G" (LH landing gear) and "10G" (RH landing gear).
4.A.2.a. LH landing gear in FLIGHT position / RH landing gear in FLIGHT position
- On the LH landing gear, make a shunt between "D" and "E" (fixed connector) to simulate the FLIGHT
position.
- On the RH landing gear, make a shunt between "D" and "E" (fixed connector) to simulate the FLIGHT
position.
- Energize the helicopter electrical power systems.
FCDM information acquisition on SMD45
- Turn off and then turn on the 4 screens.
- Make sure that the flight control symbols appear ("T" must not appear).
AHRS information acquisition
- On the AHRS control unit, set "AHRS 1" to "OFF" and then to "ON".
- Make sure that AHRS 1 aligns and then displays the information after approximately 1 minute and
5 seconds on the 2 copilot screens.
- On the AHRS control unit, set "AHRS 2" to "OFF" and then to "ON".
- Make sure that AHRS 2 aligns and then displays the information after approximately 1 minute and
5 seconds on the 2 pilot screens.
Revision 0 2018-02-19  Page 11/12
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 12 (OCR)

AIRBUS
HELICOPTERS  SB No. EC155-34A037
4.A.2.b. LH landing gear in GROUND position / RH landing gear in FLIGHT position
• De-energize the helicopter electrical power systems.
• On the LH landing gear, remove the shunt between "D" and "E" (fixed connector) to simulate the GROUND
position.
- Energize the helicopter electrical power systems.
FCDM information acquisition on SMD45
- Turn off and then turn on the 4 screens.
- Make sure that the flight control symbols appear ("T must not appear).
4.A.2.c. LH landing gear in FLIGHT position / RH landing gear in GROUND position
- De-energize the helicopter electrical power systems.
- On the LH landing gear, make a shunt between "D" and "E" (fixed connector) to simulate the FLIGHT
position.
- On the RH landing gear, make a shunt between "D" and "F" (fixed connector) to simulate the GROUND
position.
- Energize the helicopter electrical power systems.
FDM information acquisition on SMD45
- Turn off and then turn on the 4 screens.
- Make sure that the flight control symbols appear ("T" must not appear).
4.A.2.d. LH landing gear in GROUND position / RH landing gear in GROUND position
- De-energize the helicopter electrical power systems.
On the LH landing gear, remove the shunt between "D" and "E" (fixed connector).
On the RH landing gear, remove the shunt between "D" and "F" (fixed connector).
- Connect connectors "9G" (LH landing gear) and "10G" (RH landing gear).
- Lower the helicopter from the jacks as per Sub-task 07-10-00-581-001 of Task 07-10-00-581.
- Energize the helicopter electrical power systems.
FCDM information acquisition on SMD45
Turn off and then turn on the 4 screens.
- Make sure that "T" appears for a few seconds on the 4 screens and then that the flight control symbols
appear (longer initializing phase than in flight).
AHRS information acquisition
- On the AHRS control unit, set "AHRS 1" to "OFF" and then to "ON".
- Make sure that AHRS 1 aligns and then displays the information after approximately 30 seconds on
the 2 copilot screens.
- On the AHRS control unit, set "AHRS 2" to "OFF" and then to "ON".
- Make sure that AHRS 2 aligns and then displays the information after approximately 30 seconds on
the 2 pilot screens.
4.A.3. Final steps
De-energize the helicopter electrical power systems as per Sub-task 24-00-00-481-002 of
Task 24-00-00-481.
Revision 0 2018-02-19  Page 12/12
This document is available on the Internet: www.airbushelicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
