# Airbus Helicopters Alert Service Bulletin EC155-53A040

Copy: No revision named ("Airbus Helicopters ASB No. EC155-53A040 Rev 0"), 11 pages: PDF https://openairdocs.org/files/sha256/75/fe/75fe6af4ddc4c38b20ad19580a0beed86bb002bb269a7e9db9c1b40b2c8a4725; text https://openairdocs.org/service-documents/airbus-helicopters/ec155-53a040/file/75fe6af4ddc4.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2022-0381, the docket of AD 2022-11-18. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC155-53A040
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec155-53a040

## Text (11 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2022-0381, the docket of AD 2022-11-18. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS  HELICOPTERS
No. EC155-53A040
Civil version(s): B, B1
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE
FUSELAGE - Engine cowlings
Inspection of the engine upper fixed cowling
For the attention of
Revision No.  Date of issue
Revision 0  2021-10-27
Summary:
The purpose of this ALERT SERVICE BULLETIN is to make sure that there is no finish paint inside the duct of the
engine upper fixed cowling.
Compliance:
It is mandatory to comply with this ALERT SERVICE BULLETIN.
Révision 0 2021-10-27  Page 1/11
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS  HELICOPTERS
No. EC155-53A040
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
Helicopters EC155, versions B and B1 with engine upper fixed cowling, P/Ns 365A58-1012-xx and delivered
before the release date of revision 0 of this ALERT SERVICE BULLETIN.
NOTE 1
"xx" at the end of the P/N means all numbers.
1.A.2. Non-installed equipment or parts
Engine upper fixed cowling, part number 365A58-1012-xx and delivered before the release date of revision O
of this ALERT SERVICE BULLETIN.
NOTE 2
"xx" at the end of the P/N means all numbers.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Airbus Helicopters observed polyurethane finish paint on the internal side of the engine upper fixed cowling
of some in-service Helicopters.
In the certified engine fixed cowling definition, all internal surfaces of the cowling are coated with primer paint
only (no finish paint).
From Airbus Helicopters fire test results, the presence of polyurethane finish paint on non-ventilated surfaces
may support fire propagation in case of a fire event adjacent to this area.
Consequently, the purpose of this ALERT SERVICE BULLETIN is to make sure that there is no finish paint
inside the duct of the engine upper fixed cowling.
1.D. DESCRIPTION
The purpose of this ALERT SERVICE BULLETIN is to:
- Do a visual check to make sure that there is no finish paint inside the duct of the engine upper fixed
cowling.
- If there is finish paint inside the duct of the engine upper fixed cowling:
• Remove the engine upper fixed cowling.
. Remove the finish paint from the painted zones.
. Apply primer on the stripped zones.
. Install the engine upper fixed cowling.
Révision 0 2021-10-27  Page 2/11
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS  HELICOPTERS
No. EC155-53A040
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Not applicable.
1.E.2. Compliance in service
Helicopters/ installed equipment or parts:
The operator must do the work on the helicopter.
Do a check of the duct of the engine upper fixed cowling, refer to paragraph 3.B.2.a. of this
ALERT SERVICE BULLETIN, not more than 110 flight hours or 6 months after you received revision 0 of this
ALERT SERVICE BULLETIN (refer to the issue date on the page footer).
Interpretation of results
- If there is no finish paint inside the duct of the engine upper fixed cowling (a):
. No more actions is required.
- If there is finish paint inside the duct of the engine upper fixed cowling (a):
. Obey with paragraph 3.B.2.b. not more than 6 months after you complied with paragraph 3.B.2.a. of
revision 0 of this ALERT SERVICE BULLETIN.
Non-installed equipment or parts:
Before you install an engine upper fixed cowling, do a check of the stock and modify when applicable as
given in paragraph 3.B.4.
1.F. APPROVAL
Approval of modifications:
Not applicable.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision O was approved on
October 25, 2021 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
Révision 0 2021-10-27  Page 3/11
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS  HELICOPTERS
No. EC155-53A040
1.G. MANPOWER
Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this
qualification:
Qualification: 1 Airframe Technician.
The man-hours are an estimate given for information only and for a standard helicopter configuration.
Estimated Man-hours: one hour for one Airframe Technician (only for the check).
The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.
The estimate of the helicopter downtime is one hour (excluding stripping time).
1.H. WEIGHT AND BALANCE
Not applicable.
1.I. POWER CONSUMPTION
Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K. REFERENCES
These documents are necessary to comply with this ALERT SERVICE BULLETIN:
Standard Practices Manual (MTC):
MTC: 20-04-01-402: Cleaning of removed individual parts with liquid solvents - Cleaning
MTC: 20-04-05-101: Painting equipments and paint touch-ups - General - Paint and primer application
procedure
MTC: 20-04-05-402: Application of Epoxy primer P05 - P20 - Paint and primer application procedure
MTC: 20-07-02-201: Helicopter parked in a repair shop - Safety instructions
MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power
generating systems - Technical instructions
MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions
MTC: 20-08-05-103: Monitoring of parts in operation - marking - service life customization - General rules
applicable to aircraft
Aircraft Maintenance Manual (AMM):
AMM: 53-54-00-061: Engine cowlings: Removal / Installation - Engine Cowlings
Information Notice (IN):
IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service
IN: 3643-1-00: Introduction of the digital Service Bulletin reporting R-Tex
Révision 0 2021-10-27  Page 4/11
This document is available on the Internet: www. airb  ushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS  HELICOPTERS
No. EC155-53A040
1.L. OTHER AFFECTED PUBLICATIONS
Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Not applicable.
Révision 0 2021-10-27  Page 5/11
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS  HELICOPTERS
No. EC155-53A040
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Not applicable.
2.B. LOGISTIC INFORMATION
Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Consumables to be ordered separately:
Refer to the Tasks and Work Cards mentioned in this ALERT SERVICE BULLETIN and the list below:
Designation  Qty  Consumable P/N  Item
240 to 360 Sand paper  AIR  Commercial reference  1
400 Sand paper  AVR  Commercial reference  2
Epoxy primer P20  A/R  DHS186-111.40  488  3
NOTE
When ordering epoxy primer P20 (DHS186-111.40/CM488),
also order  hardener  (DHS186-111.21/CM4008) and
if necessary thinner (DHS186-111.22/CM4009).
You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN No. 3481-1-00).
If you cannot get access to e-ordering, please contact your Logistic Focal Point.
Special tools:
Refer to the Tasks and Work Cards mentioned in this ALERT SERVICE BULLETIN.
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Révision 0 2021-10-27  Page 6/11
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 7 (OCR)

AIRBUS  HELICOPTERS
No. EC155-53A040
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- Obey with the general instructions for painting equipments and paint touch-ups, refer to the
Work Card 20-04-05-101 (MTC).
- Obey with the safety instructions for a helicopter parked in a repair shop, refer to the
Work Card 20-07-02-201 (MTC).
3.B. WORK STEPS
3.B.1. Preliminary steps
- Park the helicopter in a maintenance hangar.
- Disconnect all the electrical power supplies, refer to the Work Card 20-07-03-406 (MTC).
- Install the appropriate access equipment.
- Remove and/or open all cowlings, panels, doors and all equipment items to enable adequate access to the
various work areas.
3.B.2. Procedure
3.B.2.a. Visual check of the inside of the duct of the engine upper fixed cowling (Figure 1, Figure 3)
- Do a visual check to make sure that there is no finish paint inside the duct of the engine upper fixed
cowling (a) in the hatched zone C (Figure 1 and Figure 3, Details A and B):
. The last layer must be the P20 primer layer.
. A light spray of paint through which the primer color is still visible is considered acceptable and does not
need to be stripped.
P20 primer  Acceptable: P20 primer  Not acceptable: P20
exposed across the  primer partly covered
whole surface
Figure 1 - representation of P20 primer layer
- Refer to paragraph 1.E.2. for the interpretation of results.
Révision 0 2021-10-27  Page 7/11
This document is available on the Internet: www. airb  ishelicopters.com/techpub/

### Page 8 (OCR)

AIRBUS  HELICOPTERS
No. EC155-53A040
3.B.2.b. Removal of finish paint inside of the duct of the engine upper fixed cowling (Figure 3)
CAUTION
DO NOT USE ANY MECHANICAL TOOLS OR
CHEMICALS PRODUCTS TO REMOVE FINISH
PAINT INSIDE THE DUCT OF THE ENGINE FIXED
COWLING (a).
USE SANDPAPER WITH AN APPROPRIATE GRIT
SIZE TO PREVENT DAMAGE WHEN YOU REMOVE
FINISH PAINT INSIDE THE DUCT OF THE ENGINE
FIXED COWLING (a).
- Remove the engine upper fixed cowling (a), refer to the Task 53-54-00-061 (AMM).
- Remove the finish paint inside of the duct of the engine upper fixed cowling (a) with sand paper (1) or (2)
(not shown) until the primer layer appears.
- Apply the protection on the stripped zone with epoxy primer P20 (3) refer to Figure 1 and
Work Card 20-04-05-402 (MTC).
- Identify again the engine upper fixed cowling (a), refer to paragraph 3.C.
- Install the engine upper fixed cowling (a), refer to the Task 53-54-00-061 (AMM).
3.B.3. Final steps
- Set the helicopter to the flight condition.
- Do an appearance check of the helicopter after inspection or repair, refer to the
Work Card 20-07-03-408 (MTC).
- Remove the access equipment.
- Connect all the electrical power supplies, refer to the Work Card 20-07-03-406 (MTC).
3.B.4. Work steps for non-installed equipment or parts
Refer to Figure 2 and Figure 3
- Do a visual check to make sure that there is no finish paint inside the duct of the engine upper fixed
cowling (a) in the hatched zone C (Figure 2 and Figure 3 Details A and B):
. The last layer must be the P20 primer layer.
. A light spray of paint through which the primer color is still visible is considered acceptable and does not
need to be stripped
P20 primer  Acceptable: P20 primer  Not acceptable: P20
exposed across the  primer partly covered
whole surface
Figure 2 - representation of P20 primer layer
Révision 0 2021-10-27  Page 8/11
This document is available on the Internet: www.air  oushelicopters.com/techpub/

### Page 9 (OCR)

AIRBUS  HELICOPTERS
No. EC155-53A040
- If there is no finish paint inside the duct of the engine upper fixed cowling (a):
. No action is required.
- If there is finish paint inside the duct of the engine upper fixed cowling (a):
CAUTION
DO NOT USE ANY MECHANICAL TOOLS OR
CHEMICALS PRODUCTS TO REMOVE FINISH
PAINT INSIDE THE DUCT OF THE ENGINE FIXED
COWLING (a).
USE SANDPAPER WITH AN APPROPRIATE GRIT
SIZE TO PREVENT DAMAGE WHEN YOU REMOVE
FINISH PAINT INSIDE THE DUCT OF THE ENGINE
FIXED COWLING (a).
. Remove the finish paint inside of the duct of the engine upper fixed cowling (a) with sand paper (1) or (2)
(not shown) until the primer layer appears.
• Apply the protection on the stripped zone with epoxy primer P20 (3) refer to
Work Card 20-04-05-402 (MTC).
. Clean the engine upper fixed cowling (a), refer to Work Card 20-04-01-402 (MC).
. Identify again the engine upper fixed cowling (a), refer to paragraph 3.C.
3.C. RECORD OF COMPLIANCE
Compliance with this document:
- Record full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the helicopter
documents.
- Record compliance with this ALERT SERVICE BULLETIN (see IN 3643-1-00 for instructions):
QR-Code or hypertext link
NOTE
The  recording  compliance  with
ALERT SERVICE BULLETINS in the R-Tex tool does not
replace the recording in the helicopter documents.
ASB EC155 53A040
Identification of modifications on equipment or parts:
Identify the engine upper fixed cowling refer to table below and Work Card 20-08-05-103 (MC).
Old P/N or
Key Word  New P/N  MOD  Marking type
equivalent
Engine  Old P/N  Old P/N  Indelible ink
upper fixed  + ASB No. 53A040
cowling
Révision 0 2021-10-27  Page 9/11
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 10 (OCR)

AIRBUS  HELICOPTERS
No. EC155-53A040
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Révision 0 2021-10-27  Page 10/11
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 11 (OCR)

AIRBUS  HELICOPTERS
No. EC155-53A040
Back to paragraphs 3.B.2.a., 3.B.2.b. and 3.B.4.
Figure 3
Révision 0 2021-10-27  Page 11/11
This document is available on the Internet: www.a  helicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
