# Airbus Helicopters Alert Service Bulletin EC155-63A013

Copy: Revision 1 ("Airbus ASB No EC155-63A013 Rev 1"), 15 pages: PDF https://openairdocs.org/files/sha256/ec/6e/ec6ea91e66889c4f705d13ac3b69fe3084a503f2cd61a212240698c4400355cc; text https://openairdocs.org/service-documents/airbus-helicopters/ec155-63a013/file/ec6ea91e6688.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-0410; AD 2020-21-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC155-63A013
- Latest revision known: EC155-63A013, Revision 1, dated January 31, 2019 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec155-63a013

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2021-26-18](https://openairdocs.org/ad/2021-26-18.md), effective Feb 9, 2022: Revision 1
- [AD 2020-21-01](https://openairdocs.org/ad/2020-21-01.md), effective Nov 12, 2020: Revision 1

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/airbus-helicopters/ec155-63a013/proposed.md).

## Text (15 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-0410; AD 2020-21-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A013
Civil version(s): B, B1
ALERT SERVICE BULLETIN
CORRECTIVE MEASURE
MAIN ROTOR DRIVE - Tail rotor drive flange
Installation of rear output stop
Corresponds to modification 0763C81
For the attention of
Revision No.  Date of issue
Revision 0  2018-01-22
Revision 1  2019-01-31
Summary:
The purpose of this ALERT SERVICE BULLETIN is to install a rear output stop between the tail rotor drive flange
and tail rotor drive shaft, limiting the backward displacement of the tail rotor drive flange and thus making it
impossible for the tail rotor drive flange to be disengaged in a very rare case of a total loss of SHUR-LOK nut.
Compliance with this ALERT SERVICE BULLETIN cancels the instructions in ALERT SERVICE BULLETIN
No. 63A012.
Reason for last Revision:
Revision 1 of this ALERT SERVICE BULLETIN makes the compliance mandatory and cancels the instructions in
ALERT SERVICE BULLETIN No. 63A012. A new maintenance program is also introduced.
Compliance:
Compliance with this ALERT SERVICE BULLETIN is mandatory.
Revision 0 2018-01-22  Page 1/15
Revision 1 2019-01-31  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A013
1. PLANNING INFORMATION
CAUTION
THIS ALERT SERVICE BULLETIN IS WRITTEN
BASED ON THE ORIGINAL HELICOPTER
CONFIGURATION (AS DEFINED IN  THE
INDIVIDUAL INSPECTION LOG BOOK (RIC)). IT
ALSO TAKES INTO ACCOUNT ALL AIRBUS
HELICOPTERS APPROVED CONFIGURATION
CHANGES MADE AFTER DELIVERY, IF AIRBUS
HELICOPTERS WAS INFORMED OF THEM. IT IS
THE RESPONSIBILITY OF THE OPERATOR TO
CHECK  THE  COMPATIBILITY  OF  ANY
MODIFICATIONS  WITH  THE CURRENT
HELICOPTER  CONFIGURATION.
MODIFICATIONS ARE INCOMPATIBLE, IT IS THE
RESPONSIBILITY OF THE OPERATOR TO DEFINE
THE NECESSARY ADAPTATION WORK AND HAVE
THEM APPROVED BY THE AIR TRANSPORT
AUTHORITIES IN THE COUNTRY CONCERNED,
AND  MAKE  SURE  THAT  THEIR
AIRWORTHINESS IS FOLLOWED UP.
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
Helicopters which have not embodied modification 0763C81.
NOTE 1
Refer to the Individual Inspection Log Book (RIC AMS) or
the Aircraft Log Book to identify the current modification
status of the helicopter.
1.A.2. Non-installed equipment or parts
Not applicable.
1.B. ASSOCIATED REQUIREMENTS
CAUTION
BEFORE NEXT FLIGHT, CHECK IF YOUR MASTER
SERVICING MANUAL (MSM) WAS UPDATED AS
APPROVED BY THE COMPETENT AUTHORITIES.
REFER TO PARAGRAPH 3.D.
Revision 0  2018-01-22  Page 2/15
Revision 1 2019-01-31  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A013
1.C. REASON
Revision 0:
Following several cases of loss of tightness of the SHUR-LOK nut which retains the tail rotor drive flange of
the Main Gearbox, Airbus Helicopters has issued ALERT SERVICE BULLETIN No. 63A012 to perform
checks.
In a very rare case where the SHUR-LOK nut is totally disengaged, the tail rotor drive flange could move
backward with respect to the output shaft pinion of main gearbox. This results in the desynchronization of the
tail rotor on ground.
To prevent this, Airbus Helicopters introduces a rear output stop, which limits the backward displacement of
the tail rotor drive flange, thus making it impossible for the tail rotor drive flange to be disengaged.
PRE MOD  Backward displacement
of tail rotor drive flange  Front tail rotor shaft
FWD
Loss of nut
New aft output stop
POST MOD  Limited backward displacement  with 5 spigots
• Row of 5 bolt heads
FWD
Loss of nut
NOTE 2
The illustration above shows the MGB rear transmission
coupling of a helicopter without the air conditioning system
installed. However, the modification shown in this illustration
is  also applicable to helicopters equipped with air
conditioning system.
Compliance with revision 0 of this ALERT SERVICE BULLETIN does not cancel the instructions in ALERT
SERVICE BULLETIN No. 63A012.
Revision 0  2018-01-22  Page 3/15
Revision 1 2019-01-31  This document is available on the Internet: www.airbu  /icopters.com/techpub/

### Page 4 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A013
Revision 1:
Following a new case of desynchronization of the tail rotor due to the complete disengagement of the
retaining nut of the tail rotor drive flange, the revision 1 of this ALERT SERVICE BULLETIN makes its
compliance mandatory. The compliance with the revision 1 of this ALERT SERVICE BULLETIN cancels the
instructions in ALERT SERVICE BULLETIN No. 63A012 revision 2. This information will be officialized by
revision 3 of the ALERT SERVICE BULLETIN No. 63A012 (protective measure).
This revision 1 also clarifies the changes to the maintenance program. The existing maintenance is reduced
to checks that do not require removal. The new maintenance instructions will be integrated in new and
existing work cards.
In addition, the procedure in this ALERT SERVICE BULLETIN is further simplified and clarified. This ALERT
SERVICE BULLETIN is written in line with Information Notice No. 3218-1-00.
Revision 1 of this ALERT SERVICE BULLETIN affects the compliance with revision 0 of this ALERT
SERVICE BULLETIN.
1.D. DESCRIPTION
This ALERT SERVICE BULLETIN consists of:
- removal of sliding flange from rear transmission coupling,
- re-installation of sliding flange with aft outlet stop on rear transmission coupling.
NOTE 3
A radio-communication emissions check is only required for
helicopters equipped with flexible coupling installed without
bonding bridges.
NOTE 4
The radio-communication emissions check is part of the task
during the installation of the shaft center segment mentioned
in the installation of the shaft forward segment, and requires
a ground run-up and a flight test.
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Airbus Helicopters makes it mandatory to comply with the instructions of paragraph 3. of this ALERT
SERVICE BULLETIN before the delivery of the helicopter.
Revision 0 2018-01-22  Page 4/15
Revision 1 2019-01-31  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A013
1.E.2. Compliance in service
Helicopters/installed equipment or parts:
The works must be performed on helicopter by the operator.
For helicopters who have not complied with revision 0 of this ALERT SERVICE BULLETIN, comply with
paragraph 3. of this ALERT SERVICE BULLETIN within 600 flying hours or at the latest within 24 months,
whichever comes first, as from receipt of revision 0 of this ALERT SERVICE BULLETIN at the date
mentioned in page footer.
For helicopters who have complied with revision 0 of this ALERT SERVICE BULLETIN, comply with the
scheduled maintenance indicated in paragraph 3.D. of this ALERT SERVICE BULLETIN.
Non-installed equipment or parts:
Not applicable.
1.F. APPROVAL
Approval of modifications:
The information or instructions relate to modification 0763C81 (issue B), which was approved
on February 13, 2017 by the EASA for civil version helicopters subject to an Airworthiness Certificate.
The information or instructions relate to modification 0763C81 (issue C), which was approved
on January 18, 2019 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on January 18, 2018 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved
on January 31, 2019 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
1.G. MANPOWER
• For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following staff
qualifications:
Qualifications: 2 Mechanical Technicians.
Specialist: 1 Pilot.
In addition, for helicopters equipped with flexible coupling installed without bonding bridges, an Avionics
Technician is required for the radio-communication emissions check.
Revision 0 2018-01-22  Page 5/15
Revision 1 2019-01-31  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A013
The Estimated Man-hours is indicated for reference purposes only and based on a standard helicopter
configuration.
Estimated Man-hours: - 14 hours for Mechanical Technician,
- half an hour for Pilot.
For helicopters equipped with flexible coupling installed without bonding bridges:
Additional Estimated Man-hours: - 1 hour for Avionics Technician,
- 1 hour for Pilot.
Estimated helicopter downtime is indicated for reference purposes only, based on a standard helicopter
configuration.
Helicopter downtime is estimated at 2 days.
1.H. WEIGHT AND BALANCE
- Weight: + 0.085 kg.
- Moment: longitudinal + 0.375 m.kg.
After work completion, record the weight and moment in your dedicated document.
1.I. POWER CONSUMPTION
Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K. REFERENCES
The following documents are required for compliance with this ALERT SERVICE BULLETIN.
Aircraft Maintenance Manual:
AMM: 23-00-00-721: Checking Radio-communication Emissions
AMM: 63-24-01-061: Removal / Installation - Tail Drive Shaft Flange
AMM: 65-10-01-061: Removal / Installation - Shaft Forward Segment
AMM: 65-10-02-061: Removal / Installation - Shaft Center Segment
Standard Practices Manual:
MTC: 20-04-01-102: Use of cleaning products on individual parts and on aircraft - Cleaning
MTC: 20-05-01-227: Application of Jointing Compound CA 1010 (CM 518) - General sealing procedures
MTC: 20-07-01-201: Handling of helicopters in a hangar and in a prepared area - Handling
MTC: 20-07-02-201: Helicopter parked in a repair shop - Safety instructions
MTC: 20-07-03-408:  Appearance checks on an aircraft after an inspection or repair - Technical instructions
MTC: 20-08-05-102:  Rules in force applicable for repair and maintenance of aircraft - General rules
applicable to aircraft
Revision 0  2018-01-22  Page 6/15
Revision 1  2019-01-31  This document is available on the Internet: www. airbus  helicopters.com/techpub/

### Page 7 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A013
The document in the Appendix will not be updated.
The following document is required for helicopter operation.
Flight Manual:
FLM: Section 4:  Normal Procedures
1.L. OTHER AFFECTED PUBLICATIONS
CAUTION
COMPLY WITH THIS ALERT SERVICE
BULLETIN, THE OPERATOR MUST MAKE SURE
THAT ALL THE MAINTENANCE DOCUMENTS
REQUIRED FOR THE MAINTENANCE OF THIS
INSTALLATION ARE AVAILABLE. IF NOT, IT IS
THE OPERATOR'S RESPONSIBILITY TO OBTAIN
THE DOCUMENTS FROM THE USUAL AIRBUS
HELICOPTERS CONTACT.
Publications already updated:
This modification has been integrated into the following manuals:
- Aircraft Maintenance Manual (AMM),
- Index of Modifications (SIM).
NOTE 5
The Aircraft Maintenance Manual (AMM) was updated only
to include the visual check of the rear output stop, and the
removal/installation of the tail rotor drive shaft flange and the
shaft forward segment of the tail drive shaft. The Aircraft
Maintenance Manual (AMM) will further integrate this
modification in the disassembly/assembly of Main Gearbox
and axial/radial play checks of the tail rotor drive shaft
These documents are distributed as per subscription.
Publications to be updated:
The modification will be integrated into the following documents:
- Aircraft Maintenance Manual (AMM),
- Master Servicing Manual (MSM).
These documents will be issued at a later date.
Revision of Illustrated Parts Catalog (IPC) will be updated on the customer's order.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Not applicable.
Revision 0  2018-01-22  Page 7/15
Revision 1 2019-01-31  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 8 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A013
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Price
For any information concerning the price of modification kits and/or components or for assistance, contact
the Airbus Helicopters Network Sales and Customer Relations Department.
Availability
Delivery lead times will be indicated by the Sales and Customer Relations Department on the operator's
request.
Procurement
Order the required quantity from the Airbus Helicopters Network Sales and Customer Relations Department:
Airbus Helicopters
Etablissement de Marignane
Direction Ventes et Relations Client
13725 MARIGNANE CEDEX
FRANCE
NOTE 1
On the purchase order, please specify the mode of transport,
the destination and the serial numbers of the helicopter to be
modified.
NOTE 2
For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F
Fax: +33 (0)4.42.85.99.96
2.B. LOGISTIC INFORMATION
Not applicable.
Revision 0 2018-01-22  Page 8/15
Revision 1 2019-01-31  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 9 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A013
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Kit to be ordered for one helicopter or one assembly:
New  Old
Key Word  Qty  Item
P/N  P/N  →  Instruction
Stop outlet aft  1  365A32-7836-20  1
(Rear output stop)
Equipment or parts to be ordered separately:
As per Tasks mentioned in this ALERT SERVICE BULLETIN and, as required, the list below:
Key Word  Qty  New  P/N  Item  P/N  Old  →  Instruction
Pin  23310CA020025  2
(Split pin)
Nut, hex., castellated  ASNA0045BC100L  З
Consumables to be ordered separately:
As per Tasks and Work Cards mentioned in this ALERT SERVICE BULLETIN and, as required, the list
below:
Key Word  Qty  P/N  CM  Item
Interposition sealant  1L  ECS7009  CM 518  4
(CA1010-1160)
NOTE 3
Sealing compound MP/N: Mastinox 6856 K can be used in
lieu of interposition sealant (4). However, the use of sealing
compound MP/N: Mastinox 6856 K is now prohibited in all of
the European zone.
The consumables can be ordered separately from the company KLX AEROSPACE SOLUTIONS.
Website:  https://www.klxaerospace.com/klxaero/
Telephone:  +1.305.925.2600
AOG:  +1.305.471.8888
Special tools:
As per Tasks mentioned in this ALERT SERVICE BULLETIN.
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision 0  2018-01-22  Page 9/15
Revision 1 2019-01-31  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 10 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A013
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- As per Work Card 20-07-01-201 (MTC), read and comply with instructions on handling of helicopters in a
hangar and in a prepared area.
- As per Work Card 20-07-02-201 (MTC), read and comply with safety instructions on helicopter parked in a
repair shop.
- As per Work Card 20-08-05-102 (MC), read and comply with instructions on rules in force applicable for
repair and maintenance of aircraft.
3.B. WORK STEPS
3.B.1. Preliminary steps
- Park the helicopter in a maintenance hangar.
- Disconnect all electrical power supplies.
- Install suitable access means.
- Remove the shaft forward segment as per Task 65-10-01-061, Sub-task 65-10-01-021-001 (AMM).
3.B.2. Procedure
3.B.2.a. Removal of sliding flange (Figure 1, DETAIL B, PRE MOD)
- In the next procedure, do not remove SHUR-LOK nut (a).
- Remove sliding flange (b) from flexible coupling (c) as per principle of paragraph F.1.e. of
Task 63-24-01-061, Sub-task 63-24-01-021-001 (AMM).
- Retain quantity 03 bolts (d).
- Discard quantity 03 washers (e).
NOTE 1
Figure 1 illustrates flexible coupling (c) without electrical
bonding bridges. For the purpose of this ALERT SERVICE
BULLETIN, the illustration is also applicable for flexible
coupling (c) with electrical bonding bridges.
3.B.2.b. Re-installation of sliding flange with rear output stop (Figure 1, DETAIL B, POST MOD)
- Interlay mating surfaces between rear output stop (1) and sliding flange (b) with interposition sealant (4)
as per Work Card 20-05-01-227 (MTC).
CAUTION
BEFORE INSTALLING NUTS (3),  DEGREASE
THOROUGHLY THE THREADS OF BOLTS (d) AS
PER WORK CARD 20-04-01-102 (MTC).
CAUTION
NEVER EXCEED THE MAXIMUM TORQUE VALUE
TO ALIGN A NUT SLOT WITH A PIN HOLE.
Revision 0 2018-01-22  Page 10/15
Revision 1 2019-01-31  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 11 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A013
- Install the sliding flange (b) and rear output stop (1) on flexible coupling (c) with bolts (d), split pins (2) and
nuts (3) as per principle of paragraph F.6.a. (POST MOD 0763C81) of Task 63-24-01-061,
Sub-task 63-24-01-421-003 (AMM).
3.B.3. Final steps
- Install the shaft forward segment as per Task 65-10-01-061, Sub-task 65-10-01-421-001 (AMM)
(POST MOD 0763C81).
NOTE 2
A clearance (J), as described in the Task, of less than
2.5 mm is a possible indication of incorrect installation of
transmission assemblies to the aft of the shaft forward
segment.
- Clean and restore the work area and helicopter as per Work Card 20-07-03-408 (MTC).
- Remove access means.
- Connect all electrical power supplies.
- Set helicopter to flight condition.
3.B.4. Ground run-up / flight test
- Perform ground run as per Section 4 (FLM) to check correct operation of the tail drive shaft assembly.
- Set helicopter to flight condition.
- For helicopters equipped with flexible coupling installed without bonding bridges, check the
radio-communication emissions as per Task 23-00-00-721, Sub-task 23-00-00-721-001 (AMM).
NOTE 3
The requirement of this radio-communication check is
described in the installation of the shaft center segment as
per Task 65-10-02-061 (AMM). The installation of the shaft
center segment is required in the procedure when installing
the shaft forward segment as per Task 65-10-01-061 (AMM),
as indicated in paragraph 3.B.3. of this ALERT SERVICE
BULLETIN.
3.C. COMPLIANCE CONFIRMATION
Compliance with this document:
Record full compliance with this ALERT SERVICE BULLETIN with the revision number in the helicopter
documents.
Tracking of modifications in the documentation:
Record full embodiment of modification 0763C81 in the helicopter documents.
Revision 0  2018-01-22  Page 11/15
Revision 1 2019-01-31  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 12 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A013
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Operating instructions:
Not applicable.
Maintenance instructions:
Scheduled:
For the 15-hour check, refer to Master Servicing Manual 05-20-00 ATA 05 (MSM) in effect.
Every 300 FH:
- check radial play of the tail drive shaft flange as per Task 63-24-01-221, Sub-task 63-24-01-281-001
(AMM),
- check axial play of the tail drive shaft flange as per Appendix 4.A.
The check of the SHUR-LOK nut of the tail drive shaft flange at every 600 flight hours (FH) as per the Master
Servicing Manual 05-20-00 ATA 63 (MSM) remains applicable to helicopters PRE MOD 0763C81 who have
not fully complied with this ALERT SERVICE BULLETIN
Helicopters POST MOD 0763C81 are no longer concerned by this check of the SHUR-LOK nut at
every 600 FH.
The Master Servicing Manual (MSM) and Aircraft Maintenance Manual (AMM) will integrate these
instructions during a future revision. When these instructions are integrated, refer to these manuals.
Unscheduled:
When 100 FH is reached after installation of the tail drive shaft flange, perform the following once:
- check axial play of the tail drive shaft flange as per Appendix 4.A.,
- check radial play of the tail drive shaft flange as per Task 63-24-01-221, Sub-task 63-24-01-281-001
(AMM),
- if the radial play is less than 1 mm, and the SHUR-LOK nut has not been removed, perform torque check
readjustment on the SHUR-LOK nut:
remove the flexible coupling as per Task 63-24-01-061, Sub-task 63-24-01-021-001 (AMM),
do not remove SHUR-LOK nut,
loosen the SHUR-LOK nut by approximately 1/2 to 1 turn as per the principle of removing the SHUR-LOK
nut described in Task 63-24-01-061, Sub-task 63-24-01-021-002 (AMM),
• tighten the SHUR-LOK nut again as per the principle of installing the SHUR-LOK nut described in
Task 63-24-01-061, Sub-task 63-24-01-421-002 (AMM),
. install the flexible coupling as per Task 63-24-01-061, Sub-task 63-24-01-421-003 (AMM).
For the removal and installation of the shaft forward segment of the tail rotor drive shaft assembly, refer to
the Aircraft Maintenance Manual (AMM), in effect.
Before sending the Main Gearbox to a D-level center for repair or overhaul, remove the rear output stop from
the Main Gearbox.
NOTE 4
The rear output stop is not part of the Main Gearbox
assembly.
The Master Servicing Manual (MSM) and Aircraft Maintenance Manual (AMM) will integrate these
maintenance instructions during a future revision. Further to integration of these instructions in the Master
Servicing Manual (MSM) and Aircraft Maintenance Manual (AMM), refer to these manuals.
Revision 0 2018-01-22  Page 12/15
Revision 1 2019-01-31  This document is available on the Internet: www.airk  elicopters.com/techpub/

### Page 13 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A013
PRE MOD  POST MOD
Return to paragraph 3.B.2.a.
Return to paragraph 3.B.2.b.
Figure 1
Revision 0  2018-01-22  Page 13/15
Revision 1  2019-01-31  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 14 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A013
PAGE LEFT BLANK INTENTIONALLY
Revision 0 2018-01-22  Page 14/15
Revision 1  2019-01-31  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 15 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A013
4.  APPENDIX
4.A. CHECK OF AXIAL PLAY OF MGB TAIL DRIVE SHAFT FLANGE
4.A.1. Preliminary steps
For helicopters equipped with air-conditioning system, remove the tension of the compressor drive belt as
per the principle of Task 21-52-00-061 (AMM).
4.A.2. Procedure
- Do not remove the forward segment from the tail drive shaft.
- Do not remove the flexible coupling from the tail drive shaft flange.
- Apply the rotor brake.
- Apply a torque by hand on the tail drive shaft flange in the clockwise direction until the rotational play
comes to a stop.
- Make sure that there is no axial play.
- If there is axial play, check the SHUR-LOK nut as per Task 63-24-01-221,
Sub-task 63-24-01-221-001 (AMM).
- Apply a torque by hand on the tail drive shaft flange in the counterclockwise direction until the rotational
play comes to a stop.
- Make sure that there is no axial play.
- If there is axial play, check the SHUR-LOK nut as per Task 63-24-01-221, Sub-task 63-24-01-221-001
(AMM).
4.A.3. Final steps
For helicopters equipped with air-conditioning system, adjust the tension of the compressor drive belt as per
principle of Task 21-52-00-061 (AMM).
Revision 0 2018-01-22  Page 15/15
Revision 1 2019-01-31  This document is available on the Internet: www.airbushelicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
