# Airbus Helicopters Alert Service Bulletin EC155-63A017

Copy: No revision named ("Airbus Helicopters ASB No. EC155-63A017 Rev 0"), 17 pages: PDF https://openairdocs.org/files/sha256/58/8a/588ac6ad81ed1313f4b9301609e604411dbbe6e98d2c6a0559954b4117364be1; text https://openairdocs.org/service-documents/airbus-helicopters/ec155-63a017/file/588ac6ad81ed.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1036, the docket of AD 2021-03-06. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC155-63A017
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec155-63a017

## Text (17 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1036, the docket of AD 2021-03-06. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A017
Civil version(s): B, B1
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE
MAIN ROTOR DRIVE - Indicating
Replacement of electrical magnetic plug of Main Gearbox (MGB) pump intake
with non-electrical magnetic plug
Corresponds to modification 0763C96
For the attention of
Revision No.  Date of issue
Revision 0  2018-07-11
Summary:
As a complement to the protective measure put in place by ALERT SERVICE BULLETIN No. 05A034, Airbus
Helicopters introduces modification 0763C96 through this ALERT SERVICE BULLETIN to improve the process and
performance in collecting metal particles in the MGB. This modification replaces the electrical magnetic plug of the
MGB pump intake with a non-electrical magnetic plug.
Compliance:
Compliance with this ALERT SERVICE BULLETIN is mandatory.
Revision 0 2018-07-11  Page 1/17
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A017
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
Helicopters which meet all the criterias as follows:
- equipped with Main Gearbox (MGB) mentioned in paragraph 1.A.2.,
- have not embodied modification 0763C96.
NOTE 1
Refer to the Individual Inspection Log Book (RIC AMS)
and/or Aircraft Log Book to identify the actual modification
status of the helicopter.
PRE MOD  POST MOD
Non-electrical  Connector to
Electrical magnetic plug  magnetic plug  be discarded
see paste
pamos pue
Revision 0 2018-07-11  Page 2/17
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A017
1.A.2. Non-installed equipment or parts
MGB part number (P/N): 365A32-9001-00 that has not embodied modification 0763C96.
NOTE 2
Refer to the Equipment Log Card (FM) to identify the actual
modification status of the MGB.
Electrical magnetic plug manufacturer part number (MP/N): 1B7807 (704A34543017).
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Following the H225 accident off Norway in April 2016, Airbus Helicopters has conducted a series of analysis
to ensure safe operation of the MGB. These investigations expanded to include the MGB of the Dauphin
family and subsequently led to the issuance of ALERT SERVICE BULLETIN No. 05A034.
As a complement to the protective measure put in place by ALERT SERVICE BULLETIN No. 05A034, Airbus
Helicopters introduces modification 0763C96 through this ALERT SERVICE BULLETIN to improve the
process and performance in collecting metal particles in the MGB. This modification replaces the electrical
magnetic plug of the MGB pump intake with a non-electrical magnetic plug. This non-electrical magnetic plug
is installed on the MGB pump intake in earlier versions of the Dauphin helicopters.
The replacement of this electrical magnetic plug with a non-electrical magnetic plug will ease the periodic
visual inspection for engineers, and changes neither the activation logic nor the recording of the metal
particles detection of the remaining electrical magnetic plugs on the MGB.
Airbus Helicopters makes compliance with Revision 0 of this ALERT SERVICE BULLETIN mandatory.
1.D. DESCRIPTION
This ALERT SERVICE BULLETIN consists of:
- replacing the electrical magnetic plug of the MGB pump intake with a non-electrical magnetic plug,
- modifying the wiring of the electrical particle detection system of the MGB, including disconnection anc
stowage of unused wires.
NOTE 3
To replace the electrical magnetic plug, the MGB must be
drained. On completion of the modification, the MGB will be
filled again. A ground run-up is required to complete the
filling task.
Revision 0 2018-07-11  Page 3/17
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A017
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Helicopters/installed equipment or parts:
Airbus Helicopters makes it mandatory to apply the instructions of paragraph 3. except paragraphs 3.B.6.
and 3.D. of this ALERT SERVICE BULLETIN before the delivery of the helicopter.
Non-installed equipment or parts:
Airbus Helicopters makes it mandatory to apply the instructions of paragraph 3.B.6.a. of this ALERT
SERVICE BULLETIN before the delivery of the MGB mentioned in paragraph 1.A.2. of this ALERT SERVICE
BULLETIN.
1.E.2. Compliance in service
Helicopters/installed equipment or parts:
The work must be performed on helicopter by the Operator.
Airbus Helicopters makes compliance with this ALERT SERVICE BULLETIN mandatory.
Comply with paragraph 3. except paragraphs 3.B.6. and 3.D. of this ALERT SERVICE BULLETIN within
110 FH as from receipt of this ALERT SERVICE BULLETIN published at the date mentioned in the page
footer and at the latest on June 30, 2019.
Non-installed equipment or parts:
The work must be performed on the MGB by the Operator.
Before installation on helicopter, modify the MGB as per paragraph 3.B.6.a. of this ALERT SERVICE
BULLETIN.
Building up spare stocks of non-electrical magnetic plug for compliance with this ALERT SERVICE
BULLETIN is left to the Operator's initiative.
1.F. APPROVAL
Approval of modifications:
The information or instructions relate to modification 0763C96, which was approved on June 22, 2018 by
the EASA for civil version helicopters subject to an Airworthiness Certificate.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on July 11, 2018 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
Revision 0 2018-07-11  Page 4/17
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A017
1.G. MANPOWER
For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following
personnel qualifications:
Qualification:  - 1 Electrical Technician,
- 1 Mechanical Technician.
Specialist:  - 1 Pilot.
The Estimated Man-hours are indicated for reference purposes only and based on a standard helicopter
configuration.
Estimated Man-hours:  - 2 hours for Electrical Technician,
- 5 hours for Mechanical Technician,
- 0.5 hours for Pilot.
Estimated helicopter downtime is indicated for reference purposes only, based on a standard helicopter
configuration.
Helicopter downtime is estimated at one day.
1.H. WEIGHT AND BALANCE
Change in weight and moment is negligible.
1.I. POWER CONSUMPTION
Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
Revision 0 2018-07-11  Page 5/17
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A017
1.K. REFERENCES
The following documents are required for compliance with this ALERT SERVICE BULLETIN.
Aircraft Maintenance Manual:
AMM: 24-00-00-911: General safety instructions - Electrical power
AMM: 60-00-00-061: General - Removal / installation principle applicable to a part / LRU
AMM: 60-00-00-911: General safety instructions - Power transmission systems
AMM: 63-40-02-061: Removal / installation - MGB electrical magnetic plugs
AMM: 63-40-02-721: Function Test - MGB electrical magnetic plug
Safety Information Notice:
SIN: 3069-S-63:  Checking procedure for magnetic plug installation and locking - Main Rotor Drive
Standard Practices Manual:
MTC: 20.02.01.418:  Protection of electrical wiring during maintenance operations - General
MTC: 20.02.06.402: Safetying with lockwire - Safetying and locking assemblies
MTC: 20.05.01.222: Application of PR 1771 B2 sealant - General sealing procedures
MTC: 20.07.01.201:  Handling of helicopters in a hangar and in a prepared area - Handling
MTC: 20.07.02.201:  Helicopter parked in a repair shop - Safety instructions
MTC: 20.07.03.401:  Instructions applicable during maintenance operations on mechanical assemblies -
Technical instructions
MTC: 20.07.03.408:  Appearance checks on an aircraft after an inspection or repair - Technical instructions
MTC: 20.08.05.101:  Drafting and updating the log card (FM) - General rules applicable to aircraft
MTC: 20.08.05.102:  Rules in force applicable for repair and maintenance of aircraft - General rules
applicable to aircraft
MTC: 20.09.02.901:  Preservation and packing methods of airborne equipment - Preservation
MTC: 20.80.20.101:  Contact insertion and extraction method and tools - Electrical power
MTC: 20.80.20.402:  Installation and removal of cable ties - Electrical power
MTC: 20.80.20.404:  Backshell tightening / safetying / lossening methods - Electrical power
MTC: 20.80.20.435:  Quick-ty backshell assembly method - Electrical power
MTC: 20.80.20.441:  Installation of electrical cable bundles and optical fibres - Electrical power
MTC: 20.80.20.603:  Securing rules for electrical harnesses - Electrical power
Revision 0 2018-07-11  Page 6/17
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 7 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A017
1.L. OTHER AFFECTED PUBLICATIONS
CAUTION
TO COMPLY WITH THIS ALERT SERVICE
BULLETIN, THE OPERATOR MUST ENSURE THAT
ALL THE MAINTENANCE DOCUMENTS REQUIRED
FOR THE MAINTENANCE OF THIS INSTALLATION
ARE AVAILABLE. OTHERWISE,  IT IS THE
OPERATOR'S RESPONSIBILITY TO PROCURE THE
PUBLICATIONS VIA  THE USUAL AIRBUS
HELICOPTERS CONTACT.
Publications to be updated:
This modification will be integrated into the following manuals:
- Aircraft Maintenance Manual (AMM),
- Flight Crew Data (FCD),
- System Description Section (SDS),
- Index of Modifications (SIM).
These documents will be circulated at a later date as per subscription.
Revisions of Illustrated Parts Catalog (IPC) and Wiring Diagram Manual (WDM) will be updated upon the
customer's order.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Interchangeability:
PRE MOD electrical magnetic plug and POST MOD non-electrical magnetic plug are not interchangeable.
PRE MOD and POST MOD MGBs are not interchangeable.
Mixability:
Not applicable.
Revision 0 2018-07-11  Page 7/17
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 8 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A017
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
For any information concerning price of modification kits and/or components or for assistance, contact the
Airbus Helicopters Network Sales and Customer Relations Department.
Delivery deadlines will be indicated by Sales and Customer Relations Department on Operator's request.
Order the required quantity from the Airbus Helicopters Network Sales and Customer Relations Department:
Airbus Helicopters
Etablissement de Marignane
Direction Ventes et Relations Client
13725 MARIGNANE CEDEX
FRANCE
NOTE 1
On the purchase order, please specify the mode of transport,
the destination and the serial numbers of the helicopter to be
modified.
NOTE 2
For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F
Fax: +33 (0) 4.42.85.99.96
2.B. LOGISTIC INFORMATION
Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Kits to be ordered for one helicopter or one assembly:
Order as required:
Key Word  Qty  New  P/N  Item  Old  P/N  →  Instruction
Magnetic Plug  1  365A32-7701-00  1  1B7807  Store
(704A34543017)
Body, Magnetic plug  ref.  For reference only  1a  For ref only
Magnetic part  ref.  For reference only  1b  For ref only
O'ring (Viton)  PS701-6006-126  2
Cap  4  E0737B0816
Revision 0  2018-07-11  Page 8/17
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 9 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A017
Equipment or parts to be ordered separately:
As per Work Cards and Tasks mentioned in this ALERT SERVICE BULLETIN, and as required the list
below:
Key Word  Qty  New  Item  Old
P/N  P/N  →  Instruction
Lockwire  0.5 m  EN3628-0,8  4
Clamp  1  E0043-4A0P  5
Consumables to be ordered separately:
As per Work Cards and Tasks mentioned in this ALERT SERVICE BULLETIN and, as required, the list
below:
Key Word  Qty  Product  P/N  Item
Oil, Ester-type  0.1 L  0-148  CM 113
Oil  0.1 L  NATO-0-155  CM 123  7
Grease, G-361  0.1 L  DCSEA361  CM 149  8
Sealant  0.1 kg  ECS2339-60  CM 6068  9
NOTE 3
Procurement of oil (6) or (7) is dependent on the type of oil
used for the MGB
The consumables can be ordered separately from the company KLX AEROSPACE SOLUTIONS.
Website :  https://www.klxaerospace.com/klxaero/
Telephone:  +1.305.925.2600
AOG:  +1.305.471.8888
Special tools:
As per Work Cards and Tasks mentioned in this ALERT SERVICE BULLETIN.
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision 0 2018-07-11  Page 9/17
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 10 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A017
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- Read and comply with general safety instructions on electrical power as per Task 24-00-00-911 (AMM).
- Read and comply with general instructions on removal and installation principle applicable to a part or LRU
as per Task 60-00-00-061 (AMM).
- Read and comply with general safety instructions on power transmission systems as per
Task 60-00-00-911 (AMM).
- Read and comply with instructions on protection of electrical wiring during maintenance operations as per
Work Card 20.02.01.418 (MTC).
- Read and comply with instructions on handling of helicopters in a hangar and in a prepared area as per
Work Card 20.07.01.201 (MTC).
- Read and comply with instructions on helicopters parked in a repair shop as per Work
Card 20.07.02.201 (MTC).
- Read and comply with instructions applicable during maintenance operations on mechanical assemblies as
per Work Card 20.07.03.401 (MTC).
- Read and comply with rules in force applicable for repair and maintenance of aircraft as per Work
Card 20.08.05.102 (MTC).
- Read and comply with instructions on contact insertion and extraction method and tools as per Work
Card 20.80.20.101 (MTC).
- Read and comply with instructions on backshell tightening, safetying and loosening methods as per Work
Card 20.80.20.404 (MTC).
- Read and comply with instructions on quick-ty backshell assembly method as per Work
Card 20.80.20.435 (MTC).
- Read and comply with instructions on installation of electrical cable bundles as per Work
Card 20.80.20.441 (MTC).
- Read and comply with instructions on securing rules for electrical harnesses as per Work
Card 20.80.20.603 (MTC).
3.B. WORK STEPS
3.B.1. Preliminary steps
- Park the helicopter in a maintenance hangar.
CAUTION
BEFORE WORKING ON ELECTRICAL CIRCUITS,
READ TASK 24-00-00-911 (AMM).
CAUTION
BEFORE WORKING ON MECHANICAL SYSTEM,
READ TASK 60-00-00-911 (AMM).
- Disconnect all electrical power supply sources.
- Install appropriate access means.
- Remove any equipment to get access to work zone, as necessary.
Revision 0 2018-07-11  Page 10/17
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 11 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A017
3.B.2. Procedure
CAUTION
WHEN WORKING ON MGB, BE CAREFUL NOT TO
SCRATCH OR DAMAGE THE MGB, OR DAMAGE
ANY ADJACENT SYSTEMS.
3.B.2.a. Replacement of electrical magnetic plug of MGB pump intake with non-electrical magnetic plug (Figure 1)
3.B.2.a. 1. Removal of electrical magnetic plug (Figure 1, DETAIL A, PRE MOD)
- Remove electrical magnetic plug "81E" (a) and electrical magnetic plug body (b) as per
Task 63-40-02-061, Sub-task 63-40-02-021-001 (AMM).
- Store the electrical magnetic plug "81E" (a) and the electrical magnetic plug body (b) as per Work
Card 20.09.02.901 (MTC).
- Clean area.
3.B.2.a.2. Installation of non-electrical magnetic plug (Figure 1)
- Remove the magnetic part (1b) from the magnetic plug body (1a) of magnetic plug (1)
(DETAIL A, POST MOD).
- Lubricate O'ring (2) with oil (6) or (7):
. make sure that the oil (6) or (7) is the same type as the oil to be filled in the MGB (c).
- Install the lubricated O ring (2) onto the magnetic plug body (1a).
- Lubricate screw thread of the magnetic plug body (1a) with grease (8).
- Install and torque-tighten the magnetic plug body (1a) on the MGB (c).
- Safety the magnetic plug body (1a) on the MGB (c) with lockwire (4) as per Work Card 20.02.06.402
(MTC) (DETAIL B).
- Apply a bead of sealant (9) along the mating surfaces between the magnetic plug body (1a) and the
MGB (c) as per Work Card 20.05.01.222 (MTC) (DETAIL A, POST MOD).
CAUTION
MAKE SURE THAT MAGNETIC PART (1b) IS
CORRECTLY  LOCKED AS PER SAFETY
INFORMATION NOTICE NO. 3069-S-63 (SIN).
- Install the magnetic part (1b) on the magnetic plug body (1a).
Revision 0 2018-07-11  Page 11/17
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 12 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A017
3.B.2.b. Modification of wiring of electrical particle detection system of the MGB (Figure 2)
- Disconnect connector (d) from electrical magnetic plug "79E" (e) as shown in the photograph below.
- Remove label "79E-P1" (f) from the wire harness connected to the electrical magnetic plug "79E" (e).
MAGNETIC F
CAUTION
DO NOT  REMOVE  : WIRES "1EP24E" AND
"1EP25E". DO NOT CUT THESE WIRES.
- Modify the wiring of the electrical particle detection system of the MGB from PRE MOD to POST MOD
using caps (3) as shown in Figure 2:
• stow the wires "1EP24E" and "1EP25E" along existing wire routing (POST MOD),
• discard connector (g) as shown in the photograph above.
- Install the label "79E-P1" (f) on the wire harness as close as possible to the connector (d) using clamp (5)
as per Work Card 20.80.20.402 (MTC) and as shown in photograph above.
- Connect the connector (d) to the electrical magnetic plug "79E" (e).
Revision 0 2018-07-11  Page 12/17
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 13 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A017
3.B.3. Tests
- Perform functional test of the electrical particle detection installation as per paragraph G. of
Task 63-40-02-061 (AMM).
- Perform functional test of the electrical magnetic plug for the remaining electrical magnetic plugs on the
MGB as Task 63-40-02-721 (AMM).
NOTE 1
The purpose of these tests is to make sure that the particle
detection system continues to function with the remaining
electrical magnetic plugs on the MGB, after the wiring has
been modified.
3.B.4. Final steps
- Install equipment previously removed as per paragraph 3.B.1.
- Clean and restore work zones and helicopter as per Work Card 20.07.03.408 (MTC).
- Remove access means.
- Connect all electrical power supplies.
- Set the helicopter to flight condition.
3.B.5. Ground run-up / flight test
Perform ground run-up after filling of MGB as required in the Task (AMM) mentioned in this ALERT
SERVICE BULLETIN.
3.B.6. Work steps for non-installed equipment or parts
3.B.6.a. Stock retrofitting
- Replace the electrical magnetic plug MP/N: 1B7807 (704A34543017) of the MGB pump intake, on the
MGB listed in paragraph 1.A.2., as per paragraph 3.B.2.a. of this ALERT SERVICE BULLETIN.
- When equipping the MGB with its wire harnesses, modify wiring as per paragraph 3.B.2.b. of this
ALERT SERVICE BULLETIN
3.B.6.b. Stock building-up
Building up spare stocks of the non-electrical magnetic plug is incumbent on the Operator.
3.C. COMPLIANCE CONFIRMATION
Compliance with this document:
Record full compliance with this ALERT SERVICE BULLETIN No. 63A017 revision 0 in the helicopter
documents.
Record full compliance with this ALERT SERVICE BULLETIN No. 63A017 revision 0 in the Equipment Log
Card (FM).
Tracking of modifications in the documentation:
Record full compliance with modification 0763C96 in the helicopter documents.
Fill in the Equipment Log Card (FM) of the MGB P/N: 365A32-9001-00; mention modification 0763C96 and
ALERT SERVICE BULLETIN No. 63A017 and record installation of the
non-electrical magnetic plug P/N: 365A32-7701-00 as per Work Card 20.08.05.101 (MTC).
Revision 0 2018-07-11  Page 13/17
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 14 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A017
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Operating instructions:
Refer to Flight Manual (FLM) in effect.
Maintenance instructions:
Scheduled
NOTE 2
The inspection interval of the non-electrical magnetic plug is
defined in ALERT SERVICE BULLETIN No. 05A034.
Unscheduled
Removal of non-electrical magnetic plug (Figure 1):
- Push and turn by a quarter turn to remove magnetic part (1b) from magnetic plug body (1a) (DETAIL A,
POST MOD).
- Cut and remove lockwire (4) from the magnetic plug body (1a) (DETAIL B).
- Loosen and remove the magnetic plug body (1a) (DETAIL A, POST MOD).
- Remove and discard O'ring (2).
Installation of non-electrical magnetic plug:
Install the non-electrical magnetic plug as per paragraph 3.B.2.a.2. of this ALERT SERVICE BULLETIN.
The Aircraft Maintenance Manual (AMM) will incorporate these instructions during a next revision. Further to
incorporation of these instructions in the Aircraft Maintenance Manual (AMM), refer to this manual.
Revision 0 2018-07-11  Page 14/17
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 15 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A017
PRE MOD
POST MOD
CM 123
CM 113
CM 149/
2.54-3.04 m. daN
222-265  Ibf.in
1b
Return to paragraph 3.B.2.a.1.
Return to paragraph 3.B.2.a.2.
Return to paragraph 3.D.
Figure 1
Revision 0 2018-07-11  Page 15/17
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 16 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A017
PAGE INTENTIONALLY LEFT BLANK
Revision 0 2018-07-11  Page 16/17
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 17 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-63A017
PRE MOD
POST MOD
25ALP-P1
25ALP-P1
1EP23E
1 EP21E-
CONIC CASE CHIP DETI
77E  CONIC CASE CHIP DETECTOR
MGB
685
MGB BOTTOM CHIP DETECTOR
LH MGB  JCT CONNECTOR  MGB BOTTOM CHIP DETECTOR
TRANS  "DECK
685
LH MGB JCT CONNECTOR  MGB BOTTOM CHIP DETECTOR
TRANS DECK  MGB
685  685
Unless otherwise stated:
Cable gauge: DR22
Cable routing: 1BA
Existing wires to be modified
XXXXXX  Existing wires
Existing Nomex sheath
Return to paragraph 3.B.2.b.
Figure 2
Revision 0 2018-07-11  Page 17/17
This document is available on the Internet: www.airbushelicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
