# Airbus Helicopters Alert Service Bulletin EC155-67A014

Copy: No revision named ("Airbus Helicopters ASB EC155-67A014 Rev 0"), 35 pages: PDF https://openairdocs.org/files/sha256/97/b2/97b2b176466b33db9f613e75f1133935340ca4f35c83c573c7fffafcd53f1011; text https://openairdocs.org/service-documents/airbus-helicopters/ec155-67a014/file/97b2b176466b.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1119, the docket of AD 2021-07-07. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC155-67A014
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec155-67a014

## Text (35 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1119, the docket of AD 2021-07-07. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
Civil version(s): B, B1
ALERT SERVICE BULLETIN
CORRECTIVE MEASURE
ROTOR FLIGHT CONTROLS - Collective Pitch Controls
Replacement of the switch guard of the "SHEAR" control on the pilot and co-pilot
collective sticks
Corresponds to modification 0725C76 or 365P084906.00/02
For the attention of
Revision No.  Date of issue
Revision 0  2019-07-25
Summary:
Airbus Helicopters has been informed of a mechanical distortion of the switch guard of the "SHEAR" control push-
button installed on the co-pilot collective stick. This event was the subject of the publication of the Safety
Information Notice (SIN) No. 2736-S-25.
This distortion is difficult to detect and can result in shearing the hoist cable with the mission selector switch in the
"HOIST" position if the crew press on the switch guard of the "SHEAR" push-button.
To remove this risk, Airbus Helicopters has implemented modifications 0725C76 and 365P084906.00/02, which
consist in replacing the switch guard of the "SHEAR" control push-button on the pilot and co-pilot collective sticks.
Compliance:
Compliance with this ALERT SERVICE BULLETIN is mandatory.
Revision 0 2019-07-25  Page 1/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 2 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
1.  PLANNING INFORMATION
CAUTION
THIS ALERT SERVICE BULLETIN IS WRITTEN
BASED ON  THE ORIGINAL HELICOPTER
CONFIGURATION (AS DEFINED IN
INDIVIDUAL INSPECTION LOG BOOK (RIC)). IT
TAKES  ACCOUNT ALL  AIRBUS
HELICOPTERS  APPROVED CONFIGURATION
CHANGES MADE AFTER DELIVERY, IF AIRBUS
HELICOPTERS WAS INFORMED OF THEM. IT IS
THE RESPONSIBILITY OF THE OPERATOR TO
CHECK  COMPATIBILITY OF ANY
MODIFICATIONS  CURRENT
HELICOPTER  CONFIGURATION.
MODIFICATIONS ARE INCOMPATIBLE, IT IS THE
RESPONSIBILITY OF THE OPERATOR TO DEFINE
THE NECESSARY ADAPTATION WORK AND HAVE
THEM APPROVED BY THE AIR TRANSPORT
AUTHORITIES IN THE COUNTRY CONCERNED,
TO MAKE
AIRWORTHINESS IS FOLLOWED-UP.
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
Refer to Table 1 below:
Table 1
Helicopters  co-pilot collective sticks  Equipped with pilot and  POST MOD  PRE MOD
0739C75 (EC155B1
1  serial numbers (S/N) in  EC155 B1, except for the  MP/N N2000360  (P/N 704A41110138)  Standardization  repercussion on basic  0725C76
lines 2 and 3 of this table
configuration)
2  (S/N) 6620, 6627, 6632,  EC155 B1 serial numbers  6635, 6638  (P/N 704A41110140)  MP/N N2000368  365P619704.02  Customization  365P084906.00
EC155 B1 serial numbers
MP/N N2000360  Customization
(S/N) 6670, 6720, 6821,  (P/N 704A41110138)  365P640226.09
6900, 6931, 6963  365P084906.02
EC155 B serial numbers  Customization
4  (S/N) 6591, 6602, 6607,  MP/N N2000360  365A614641.00 and
6608, 6610, 6611  (P/N 704A41110138)  365A614641.01
NOTE
Refer to the Individual Inspection Log Book (RIC AMS) to
identify the current modification status of the helicopter.
Revision 0 2019-07-25  Page 2/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 3 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
1.A.2. Non-installed equipment or parts
Pilot and co-pilot collective sticks P/N MP/N N2000360 (P/N 704A41110138) or MP/N N2000368
(P/N 704A41110140).
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Airbus Helicopters has been informed of a mechanical distortion of the switch guard of the "SHEAR" control
push-button (connected to shearing of the hoist cable) installed on the co-pilot collective stick of an EC225,
LP version, helicopter. This event was the subject of the publication of the Safety Information Notice (SIN)
No. 2736-S-25.
Switch guard of the "SHEAR" control push-button, installed
on the pilot and co-pilot collective sticks of a Dauphin.
This distortion (due to incorrect handling of the collective stick) is difficult to detect and can result in shearing
of the hoist cable with the mission selector switch in "HOIST" position if the crew press on the switch guard of
the "SHEAR" push-button.
Although no similar event has been observed on the Dauphin fleet, but because the switch guards on the
Super Puma and the Dauphin are identical, Airbus Helicopters has implemented modifications 0725C76 and
365P084906.00/02, which consist in replacing the switch guard of the "SHEAR" control push-button on the
pilot and co-pilot collective sticks.
Consequently, Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
1.D. DESCRIPTION
This ALERT SERVICE BULLETIN consists in replacing the switch guard of the "SHEAR" control push-
button, installed on the pilot and co-pilot collective sticks through
NSE equipment manufacturer ALERT SERVICE BULLETIN No. ASB-001-00016646AA appended in
Appendix 4.A. or NSE No. ASB-001-00021988AA appended in Appendix 4.B.
Revision 0 2019-07-25  Page 3/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 4 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Helicopters/installed equipment or parts:
Airbus helicopters makes it mandatory to comply with the instructions in paragraph 3 of this ALERT
SERVICE BULLETIN before the delivery of the helicopter.
Non-installed equipment or parts:
The pilot and co-pilot collective sticks P/N MP/N N2000360 (P/N 704A41110138) and MP/N N2000368
(P/N 704A41110140) are no longer delivered.
1.E.2. Compliance in service
The work must be performed on the helicopter by the operator.
Helicopters/installed equipment or parts:
- For helicopters on which the "SHEAR" control is associated with an installation, comply with paragraphs
3.B.1. and 3.B.2. within 3 months as from receipt of this ALERT SERVICE BULLETIN.
- For helicopters on which the "SHEAR" control is not associated with an installation:
. comply with paragraphs 3.B.1. and 3.B.2. within 12 months as from receipt of this ALERT SERVICE
BULLETIN,
or
comply with paragraphs 3.B.1. and 3.B.2. as soon as the "SHEAR" control is connected to an installation.
Non-installed equipment or parts:
Before installation on the helicopter, comply with paragraph 3.B.1. of this ALERT SERVICE BULLETIN.
1.F. APPROVAL
Approval of modifications:
The information or instructions relate to modifications 365P084906.00 and 365P084906.02, which were
approved on April 25, 2019 under the authority of EASA Design Organization Approval No. 21J.700 for civil
version helicopters subject to an Airworthiness Certificate.
The information or instructions relate to modification 0725C76, which was approved on March 12, 2019
under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to
an Airworthiness Certificate.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision O was approved on
July 24, 2019 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
Revision 0 2019-07-25  Page 4/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 5 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
1.G. MANPOWER
For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following staff
qualifications:
Qualification: 1 Qualified Technician.
The Estimated Man-hours are indicated for reference purposes only and based on a standard helicopter
configuration.
Estimated Man-hours: approximately 2 hours.
1.H. WEIGHT AND BALANCE
Not applicable.
1.I. POWER CONSUMPTION
Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K. REFERENCES
The following documents are required for compliance with this ALERT SERVICE BULLETIN.
Aircraft Maintenance Manual (AMM):
AMM: 24-00-00-911: General Safety Instructions - Electrical Power
AMM: 67-00-00-911: General Safety Instructions - Flight Controls
Standard Practices Manual (MTC):
MTC: 20-01-01-304: Use of special products - Miscellaneous products used on helicopters
Revision 0 2019-07-25  Page 5/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 6 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
1.L. OTHER AFFECTED PUBLICATIONS
CAUTION
TO COMPLY WITH  THIS ALERT SERVICE
BULLETIN, THE OPERATOR MUST MAKE SURE
THAT ALL THE MAINTENANCE DOCUMENTS
REQUIRED FOR THE MAINTENANCE OF THIS
INSTALLATION ARE AVAILABLE. IF NOT, IT IS
THE OPERATOR'S RESPONSIBILITY TO OBTAIN
THE DOCUMENTS FROM THE USUAL AIRBUS
HELICOPTERS CONTACT.
Revision of the Illustrated Parts Catalog (IPC) must form the subject of the customer's order.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Interchangeability:
- P/N MP/N N2000360 (P/N 704A41110138) PRE MOD is not interchangeable with P/N MP/N 00016646AA
(P/N 704A41110151) POST MOD.
- P/N MP/N N2000368 (P/N 704A41110140) PRE MOD is not interchangeable with P/N MP/N 00021988AA
(P/N 704A41110152) POST MOD.
Mixability:
- Mixing between PRE MOD and POST MOD 0725C76 collective sticks is prohibited.
- Mixing between PRE MOD and POST MOD 365P084906.00 collective sticks is prohibited.
- Mixing between PRE MOD and POST MOD 365P084906.02 collective sticks is prohibited.
Revision 0 2019-07-25  Page 6/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 7 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Price
The components will be delivered free of charge by the Airbus Helicopters Dauphin program department for
compliance with this ALERT SERVICE BULLETIN.
Availability
The Airbus Helicopters Dauphin Program Department will inform the customer of kit or component availability
deadlines.
Procurement
Order the required quantity from the Airbus Helicopters Network Sales and Customer Relations Department:
Airbus Helicopters
Etablissement de Marignane
Direction Ventes et Relations Client
13725 MARIGNANE CEDEX
FRANCE
NOTE 1
On the purchase order, please specify the mode of
transport, the destination and the serial numbers of the
helicopter to be modified.
NOTE 2
For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F
Fax: +33 (0)4.42.85.99.96
2.B. LOGISTIC INFORMATION
Not applicable.
Revision 0 2019-07-25  Page 7/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 8 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Kits to be ordered for one helicopter or one assembly:
Old
Key Word  Qty  New P/N  Item
P/N →  Instruction
Push-button Switch  Guard Kit  2  00015108AB  1  For stick MP/N  N2000360
Or
Push-button Switch  Guard Kit  2  00026463AA  For stick MP/N  N2000368
Label  2  365A00124720  2
Consumables to be ordered separately:
As per Work Cards and/or Tasks mentioned in this ALERT SERVICE BULLETIN and list below:
Key Word  Qty  P/N  CM Item
sopropyl alcohol  AR  Off the shelf  CM 238
The consumables can be ordered separately from BDSI.
Website:  https://www.boeingdistribution.com
Telephone:  +1.305.925.2600
Fax:  +1.305.507.7191
AOG:  +1.305.471.8888
AOG email:  AOGdesk@Boeingdistribution.com
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision 0 2019-07-25  Page 8/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 9 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- As per Task 24-00-00-911 (AMM), read and comply with the general electrical instructions.
- As per Task 67-00-00-911 (AMM), read and comply with the general Flight Control safety instructions.
- As per Work Card 20-01-01-304 (MTC), read and comply with the instructions for the use of special
products.
3.B. WORK STEPS
The operational procedure below is identical for the pilot collective stick (a) and co-pilot collective stick (b).
The operational procedure can be performed on the helicopter, without removing the collective stick.
3.B.1. Replacement of the switch guard (c) of the "SHEAR" control (Figure 1)
- For helicopters equipped with pilot and co-pilot collective sticks P/N MP/N N2000360 (P/N 704A41110138):
• comply with paragraph 3. of NSE Equipment Manufacturer ALERT SERVICE BULLETIN
No. ASB-001-00016646AA appended in Appendix 4.A.
- For helicopters equipped with pilot and co-pilot collective sticks P/N MP/N N2000368 (P/N 704A41110140)
• Comply with paragraph 3. of NSE equipment manufacturer ALERT SERVICE BULLETIN
No. ASB-001-00021988AA appended in Appendix 4.B.
- For all helicopters:
. Make sure that the switch guard (1) of the "SHEAR" control functions without any difficulty in the two
positions (open and closed).
• Make sure that no damage occurs when replacing the switch guard of the "SHEAR" control.
. Bond the "SHEAR" label (2) to the center of the switch guard (1).
3.B.2. Tests
- For helicopters equipped with an installation associated with the "SHEAR" control:
. perform an operational test of the "SHEAR" control as per the installation procedures described in
the AMM.
- For helicopters not equipped with an installation associated with the "SHEAR" control:
• perform a functional test of the "SHEAR" control as per the installation procedures described in the AMM,
when connecting to the "SHEAR" control.
Revision 0 2019-07-25  Page 9/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 10 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
3.C. RECORD OF COMPLIANCE
Compliance with this document:
Record full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the helicopter
documents.
Tracking of modifications in the documentation:
Record full embodiment of modification 0725C76 or 365P084906.00/02 in the helicopter documents, as per
Table 2 below.
Identification of modifications on equipment or parts:
Refer to paragraph 2.D. of the NSE equipment manufacturer ALERT SERVICE BULLETIN
No. ASB-001-00016646AA appended in Appendix 4.A. or No. ASB-001-00021988AA appended in
Appendix 4.B.
Key Word  Old P/N  New P/N  MOD  Marking type
Collective stick  MP/N N2000368  MP/N 00021988AA  Label
(P/N 704A41110140)  (P/N 704A4110152)  See Table 2 below
MP/N N2000360  MP/N 00016646AA
Collective stick  (P/N 704A41110138)  (P/N 704A41110151)  Label
Table 2
Helicopters  Old P/N  New P/N  MOD
EC155 B1, except for the
1  serial numbers (S/N) in  (P/N 704A41110138)  MP/N N2000360  (P/N 704A41110151)  MP/N 00016646AA  0725C76
lines 2 and 3 of this table
2  (S/N) 6620, 6627, 6632,  EC155 B1 serial numbers  6635, 6638  (P/N 704A41110140)  MP/N N2000368  (P/N 704A4110152)  MP/N 00021988AA  365P084906.00
EC155 B1 serial numbers
(S/N) 6670, 6720, 6821,
6900, 6931, 6963,
(P/N 704A41110138)  MP/N N2000360  (P/N 704A41110151)  MP/N 00016646AA  365P084906.02
EC155 B serial numbers
4  (S/N) 6591, 6602, 6607,
6608, 6610, 6611
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Revision 0 2019-07-25  Page 10/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 11 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
ЛІНАМ
2
Figure 1
Return to paragraph 3.B.1.
Revision 0 2019-07-25  Page 11/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 12 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
4. APPENDIX
4.A. ALERT SERVICE BULLETIN NSE No. ASB-001-00016646AA
nso  Rue de l'Ambene  NSE
CS 70154
63204 - RIOM
FRANCE
ALERT SERVICE BULLETIN
No. ASB-001-00016646AA
TITLE: COLLECTIVE HANDLE SWITCH GUARDS REPLACEMENT
ATA 67
1. PLANNING INFORMATION
1. A. EFFECTIVITY
(1) Aircraft applicability
Will be defined by Airbus Helicopters.
(2) Equipment concerned
Collective Handle P/N N2000360
Collective Handle P/N N2000360 Amdt A
(3) Applicability
Change applied:
On new equipment from: January 2018.
• Systematically in case of return.
Revision A3 (Date) 2019-07-23  ASB No. ASB-001-00016646AA
Page 1/12
Revision 0 2019-07-25  Page 12/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 13 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nso  NSE
Rue de l'Ambène
CS 70154
63204 - RIOM
FRANCE
1. B. ASSOCIATED REQUIREMENTS
None
1. C. REASON
The objective of this evolution is to replace the switch guard 700071 (R/120KU01-60AA) that are not enough
rugged to prevent any unintentional action of the switch below.
1. D. DESCRIPTION
The purpose of this document is to provide instructions for equipment following change:
• Switch guard 700071 (R/120KU01-60AA) replacement
1. E. COMPLIANCE
Incorporation of this ASB is mandatory and will be applied by Supplier or repair-station systematically during
the repair of the equipment or by Operators.
1. F. APPROVAL
The technical information contained in this Equipment Manufacturer's Alert Service Bulletin was approved by
Airbus Helicopters under the prerogatives of EASA Design Organisation Approval No.21J.700 only for the
Airbus Helicopters helicopter range concerned.
1. G. LABOUR HOURS
Approximately 1 man-hour out of test.
1. H. WEIGHT AND BALANCE
Not affected.
1. I. POWER CONSUMPTION
Not applicable.
1. J. SOFTWARE UPGRADES/UPDATES
Not applicable.
Revision A3 (Date) 2019-07-23  ASB No. ASB-001-00016646AA
Page 2/12
Revision 0 2019-07-25  Page 13/35
This document is available on the Internet: www.airbush  elicopters.com/techpub

### Page 14 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nso  NSE
Rue de l'Ambène
CS 70154
63204 - RIOM
FRANCE
1. K. REFERENCES
ECPF-269-B1
CMM 67-12-95
1. L. OTHER AFFECTED PUBLICATIONS
CMM 67-19-15 to be created for P/N 00016646AA
1. M. PART INTERCHANGEABILITY OR MIXABILITY
The new switch guard can replace the old one, but the old switch guard can't replace the new one.
Revision A3 (Date) 2019-07-23  ASB No. ASB-001-00016646AA
Page 3/12
Revision 0 2019-07-25  Page 14/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 15 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nso  Rue de l'Ambène  NSE
CS 70154
63204 - RIOM
FRANCE
2. EQUIPMENT OR PARTS INFORMATION
2. A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
The kit P/N 00015108AB is to be ordered from Airbus Helicopters.
2. B. LOGISTIC INFORMATION
Not Applicable.
2. C. MATERIAL REQUIRED FOR EACH COMPONENT
Material:
The Kit P/N 00015108AB is required to modify one equipment and it is composed of the following parts:
Key Word  Item.  Qty  New P/N  Former P/N  Instruction
SWITCH GUARD  RED LABEL  2  1  00015140AA  00015107AA  700071  (1)
HANDLE 151
IDENTIFICATION  3  00022551AA  (1)
LABEL
AMENDMENT  LABEL  4  400383
Die-Cut Overlaminate
Label  5  403659  (1)
(50.8x25.4 mm)
Die-Cut Overlaminate
Label  403658  (1)
(25.4x12.7 mm)
(1)  New Part
Ingrédients :
sopropyl alcohol.
2. D. IDENTIFICATION
The Collective Handle P/N N2000360 becomes P/N 00016646AA.
The Collective Handle P/N N2000360 Amdt A becomes P/N 00016646AA Amdt A.
2. E. TOOLS
¼ inches drive metric 6-point sockets size 9.
Small unerasable black marker.
Revision A3  (Date) 2019-07-23  ASB No. ASB-001-00016646AA
Page 4/12
Revision 0 2019-07-25  Page 15/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 16 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nse  NSE
Rue de l'Ambène
CS 70154
63204 - RIOM
FRANCE
3. ACCOMPLISHMENT INSTRUCTIONS
3.A SWITCH GUARD REPLACEMENT PROCEDURE
Preliminary steps
Not Applicable
Procedure
(1)  To disassemble the switch guard P/N 700071 (R/120KU01-60AA)(1), begin to remove black cap by pulling
(2) Use the ¼ inches drive metric 6-point sockets size 9mm to unscrew the switch button nut.
Be careful not to let the switch button fall inside the handle.
Revision A3  (Date) 2019-07-23  ASB No. ASB-001-00016646AA
Page 5/12
Revision 0 2019-07-25  Page 16/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 17 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nso  Rue de l'Ambène  NSE
CS 70154
63204 - RIOM
FRANCE
(3) Remove and discard the switch guard(1).
(1)
(4) With few isopropyl alcohol clean the top of the switch guard P/N 00015140AA(1) and dry it
(1)
Revision A3  (Date) 2019-07-23  ASB No. ASB-001-00016646AA
Page 6/12
Revision 0 2019-07-25  Page 17/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 18 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nso  NSE
Rue de l'Ambène
CS 70154
63204 - RIOM
FRANCE
(5) Install and stick the red label P/N 00015107AA(2) on the switch guard P/N 00015140AA(1).
Press correctly on the label to ensure a good glueing.
(Z)
(1)
(6) Place the new switch guard P/N 00015140AA instead of the former one P/N 700071.
(7)  Screw the nut on the button switch(1). It must be torqued at 1N.m. Ensure that switch guard alignment is
in accordance with the equipment.  (1)
cNm
350-  1350
250 -
150- - 200
50 -
Revision A3  (Date) 2019-07-23  ASB No. ASB-001-00016646AA
Page 7/12
Revision 0 2019-07-25  Page 18/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 19 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nso  NSE
Rue de l'Ambène
CS 70154
63204 - RIOM
FRANCE
(8) Install the black cap on the top of the button switch clipping it.
Button switch
Cap
(9)  Remove all identification labels on the Collective Handle.
There are two labels on the Collective Handle :
One for P/N identification.
RIOM - Tel: +53 (0)4.73.67.14.00
POIGNEE PAS COLLECTIF
704 A 41 110 151
SIN  PIN  MMAA
C0018546AA
OTAN:  CONT
F7761
Picture for illustration only
One for Amdt
C  de
Amd.
in
Revision A3 (Date) 2019-07-23  ASB No. ASB-001-00016646AA
Page 8/12
Revision 0 2019-07-25  Page 19/35
This document is available on the Internet: www.airbush  elicopters.com/techpub

### Page 20 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nso  NSE
Rue de l'Ambène
CS 70154
63204 - RIOM
FRANCE
(10) Remove glue marks using Isopropyl alcohol.
(11) Report Serial Number (S/N) and the manufacturing date (MM / YY) with a small unerasable black marker
on the Identification label P/N 00022551AA(3).
nS C CUERS - Tél: +33 (0)4 94.08.61.59
POIGNÉE PAS COLLECTIF
704 A 41 110 151
(3)  15709  00016646AA  P/N:  CONT:  40/15
OTAN
F7761
(Marking on the picture is an example)
Revision A3 (Date) 2019-07-23  ASB No. ASB-001-00016646AA
Page 9/12
Revision 0 2019-07-25  Page 20/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 21 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nso  NSE
Rue de l'Ambène
CS 70154
63204 - RIOM
FRANCE
(12) Install and stick identification label P/N 00022551AA (3) on the Collective Handle as shown below.
Press correctly on the label to ensure a good glueing.
In SO CUERS - Tél: +33 (0)4 94 08 61.50
POIGNÉE PAS COLLECTIF
704 A 41 110 151
(3)  15809  P/N:  40/15
00016646AA  CONT:
OTAN:
F7761
(13) Install and stick Die-Cut Overlaminate Label P/N 403659 (5) above Identification label P/N 00022551AA
(3) as shown below.
Press correctly on the label to ensure a good glueing.
S • CUERS - Tél: +33 (0)4 94 08.61 59
(5)  POIGNÉE PAS COLLECT!!  704 A 41 110 151
10/15
15809  00016646AA  CONT:
OTAN:
F7761
Revision A3  (Date) 2019-07-23  ASB No. ASB-001-00016646AA
Page 10/12
Revision 0 2019-07-25  Page 21/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 22 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nse  Rue de l'Ambène  NSE
CS 70154
63204 - RIOM
FRANCE
(14) According to Amendment of the Collective Handle being upgraded, please cross the letter following the
table below with a small unerasable black marker.
DESCRIPTION  Amendment Being Upgraded  Amendment Label Marking
a b
COLLECTIVE
N2000360 without Amendment
HANDLE
g  n
COLLECTIVE
HANDLE  N2000360 Ind A
g  m  n
(Marking on the picture is an example)
(15) Install and stick Amendment label P/N 400383 (4) on the Collective Handle as shown below.
Press correctly on the label to ensure a good glueing.
h j k mn  Amdt.  a
m n
Revision A3  (Date) 2019-07-23  ASB No. ASB-001-00016646AA
Page 11/12
Revision 0 2019-07-25  Page 22/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 23 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nso  Rue de l'Ambène  NSE
CS 70154
63204 - RIOM
FRANCE
(16) Install and stick Die-Cut Overlaminate Label P/N 403658 (6) above Amendment label P/N 400383 (4) as
shown below.
Press correctly on the label to ensure a good glueing.
4)
mdt.  (6)
3.B TEST PROCEDURE
3.B.1 ON AIRCRAFT
Please refer to aircraft manufacturer documentation.
3.B.2 IN REPAIR SHOP
Pending the establishment of CMM 67-19-15, apply the Testing part of CMM 67-12-95.
4. ANNEX
None.
Revision A3  (Date) 2019-07-23  ASB No. ASB-001-00016646AA
Page 12/12
Revision 0 2019-07-25  Page 23/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 24 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
4.B. ALERT SERVICE BULLETIN NSE No. ASB-001-00021988AA
nso  Rue de l'Ambène  NSE
CS 70154
63204 - RIOM
FRANCE
ALERT SERVICE BULLETIN
No. ASB-001-00021988AA
TITLE: COLLECTIVE HANDLE SWITCH GUARDS REPLACEMENT
ATA 67
1. PLANNING INFORMATION
1. A. EFFECTIVITY
(1) Aircraft applicability
Will be defined by Airbus Helicopters
(2) Equipment concerned
Collective Handle P/N N2000368
Collective Handle P/N N2000368 Amdt A
(3) Applicability
Change applied:
On new equipment from: January 2018
Systematically in case of return.
Revision A2 (Date) 2019-07-23  ASB No. ASB-001-00021988AA
Page 1/12
Revision 0 2019-07-25  Page 24/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 25 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nso  NSE
Rue de l'Ambène
CS 70154
63204 - RIOM
FRANCE
1. B. ASSOCIATED REQUIREMENTS
None
1. C. REASON
The objective of this evolution is to replace the switch guard 700071 (R/120KU01-60AA) that are not enough
rugged to prevent any unintentional action of the switch below.
ГО
1. D. DESCRIPTION
The purpose of this document is to provide instructions for equipment following change:
• Switch guard 700071 (R/120KU01-60AA) replacement
1. E. COMPLIANCE
Incorporation of this ASB is mandatory and will be applied by Supplier or repair-station systematically during
the repair of the equipment or by Operators.
1. F. APPROVAL
The technical information contained in this Equipment Manufacturer's Alert Service Bulletin was approved by
Airbus Helicopters under the prerogatives of EASA Design Organisation Approval No.21J.700 only for the
Airbus Helicopters helicopter range concerned.
1. G. LABOUR HOURS
Approximately 1 man-hour out of test.
1. H. WEIGHT AND BALANCE
Not affected.
1. I. POWER CONSUMPTION
Not applicable.
1. J. SOFTWARE UPGRADES/UPDATES
Not applicable.
Revision A2 (Date) 2019-07-23  ASB No. ASB-001-00021988AA
Page 2/12
Revision 0 2019-07-25  Page 25/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 26 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nso  NSE
Rue de l'Ambène
CS 70154
63204 - RIOM
FRANCE
1. K. REFERENCES
ECPF-270-B1
CMM 67-12-95
1. L. OTHER AFFECTED PUBLICATIONS
CMM 67-19-14 to be created for P/N 00021988AA
1. M. PART INTERCHANGEABILITY OR MIXABILITY
The new switch guard can replace the old one, but the old switch guard can't replace the new one.
Revision A2 (Date) 2019-07-23  ASB No. ASB-001-00021988AA
Page 3/12
Revision 0 2019-07-25  Page 26/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 27 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nso  Rue de l'Ambène  NSE
CS 70154
63204 - RIOM
FRANCE
2. EQUIPMENT OR PARTS INFORMATION
2. A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
The kit P/N 00026463AA is to be ordered from Airbus Helicopters.
2. B. LOGISTIC INFORMATION
Not Applicable.
2. C. MATERIAL REQUIRED FOR EACH COMPONENT
Material:
The Kit P/N 00026463AA is required to modify one equipment and it is composed of the following parts:
Key Word  Item.  Qty  New P/N  Former P/N  Instruction
SWITCH GUARD  RED LABEL  2  1  00015140AA  00015107AA  700071  (1)
HANDLE 152
IDENTIFICATION  3  00022553AA  (1)
LABEL
AMENDMENT  LABEL  4  400383
Die-Cut Overlaminate
Label  5  403659  (1)
(50.8x25.4 mm)
Die-Cut Overlaminate
Label  403658  (1)
(25.4x12.7 mm)
(1)  New Part
Ingrédients :
sopropyl alcohol.
2. D. IDENTIFICATION
The Collective Handle P/N N2000368 becomes P/N 00021988AA.
The Collective Handle P/N N2000368 Amdt A becomes P/N 00021988AA Amdt A.
2. E. TOOLS
¼ inches drive metric 6-point sockets size 9mm.
Small unerasable black marker.
Revision A2 (Date) 2019-07-23  ASB No. ASB-001-00021988AA
Page 4/12
Revision 0 2019-07-25  Page 27/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 28 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nse  Rue de l'Ambène  NSE
CS 70154
63204 - RIOM
FRANCE
3. ACCOMPLISHMENT INSTRUCTIONS
3.A SWITCH GUARD REPLACEMENT PROCEDURE
Preliminary steps
Not Applicable
Procedure
(1) To disassemble the switch guard P/N 700071 (R/120KU01-60AA) (1), begin to remove black cap by pulling
it.
(2) Use the ¼ inches drive metric 6-point sockets size 9mm to unscrew the switch button nut.
Be careful not to let the switch button fall inside the handle.
Revision A2 (Date) 2019-07-23  ASB No. ASB-001-00021988AA
Page 5/12
Revision 0 2019-07-25  Page 28/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 29 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nse  NSE
Rue de l'Ambène
CS 70154
63204 - RIOM
FRANCE
(3) Remove and discard the switch guard (1).
(1)
(4) With few isopropyl alcohol clean the top of the switch guard P/N 00015140AA (1) and dry it.
(1)
Revision A2 (Date) 2019-07-23  ASB No. ASB-001-00021988AA
Page 6/12
Revision 0 2019-07-25  Page 29/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 30 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nso  NSE
Rue de l'Ambène
CS 70154
63204 - RIOM
FRANCE
(5) Install and stick the red label P/N 00015107AA(2) on the switch guard P/N 00015140AA(1).
Press correctly on the label to ensure a good glueing.
(2)
(1)
(6) Place the new switch guard P/N 00015140AA instead of the former one P/N 700071.
(7) Screw the nut on the button switch (1). It must be torqued at 1N.m. Ensure that switch guard alignment is
in accordance with the equipment.
(1)
cNm
150- - 200
50 -•
Revision A2 (Date) 2019-07-23  ASB No. ASB-001-00021988AA
Page 7/12
Revision 0 2019-07-25  Page 30/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 31 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nso  NSE
Rue de l'Ambène
CS 70154
63204 - RIOM
FRANCE
(8) Install the black cap on the top of the button switch clipping it.
Button switch
Cap
(9)  Remove all identification labels on the Collective Handle.
There are two labels on the Collective Handle :
One for P/N identification.
nse  RIOM - Tel +33 (0)4.73.57:4.00
POIGNEE PAS COLLECTIF
704 A 41 110 152
MILA
000219084A
OTAN:
F//01
Picture for illustration only
One for Amat
C  a  e
Amd.
ghj k m
Revision A2 (Date) 2019-07-23  ASB No. ASB-001-00021988AA
Page 8/12
Revision 0 2019-07-25  Page 31/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 32 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nso  NSE
Rue de l'Ambène
CS 70154
63204 - RIOM
FRANCE
(10) Remove glue marks using Isopropyl alcohol.
(11)Report Serial Number (S/N) and the manufacturing date (MM / YY) with a small unerasable black marker
on the Identification label P/N 00022553AA (3) .
nse  RIOM - Tel: +33 (0)4.73.67.14.00
(3)  POIGNEE PAS COLLECTIF
704 A 41 110 152
15 A 17  00021988AA  PIN:  10/17
OTAN:  CONT.
F7761
(Marking on the picture is an example)
Revision A2 (Date) 2019-07-23  ASB No. ASB-001-00021988AA
Page 9/12
Revision 0 2019-07-25  Page 32/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 33 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nso  Rue de l'Ambène  NSE
CS 70154
63204 - RIOM
FRANCE
(12)Install and stick identification label P/N 00022553AA (3) on the Collective Handle as shown below.
Press correctly on the label to ensure a good glueing.
In SO CUERS - Tát +33 (0)4 94 08 B1 50
POIGNEE PAS COLLECTIF
(3)  45809  704 A 41 110  PIN:  40/15
CONT:
OTAN
F7761
(Marking on the picture is an example)
(13)Install and stick Die-Cut Overlaminate Label P/N 403659(5) above Identification label P/N 00022553AA
(3) as shown below.
Press correctly on the label to ensure a good glueing
(3)
S  • CUERS - TAl +39 (0)4 94 08 61 59
(5)  POIGNÉE PAS COLLECT!!  704 A 41 110
15809  PIN:  1Q145
OTAN
F7761
(Marking on the picture is an example)
Revision A2  (Date) 2019-07-23  ASB No. ASB-001-00021988AA
Page 10/12
Revision 0 2019-07-25  Page 33/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 34 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nse  NSE
Rue de l'Ambene
CS 70154
63204 - RIOM
FRANCE
(14)According to Amendment of the Collective Handle being upgraded, please cross the letter following the
table below with a small unerasable black marker.
DESCRIPTION  Amendment Being Upgraded  Amendment Label Marking
a b
COLLECTIVE
N2000368 without Amendment
HANDLE
g  m  n
COLLECTIVE
HANDLE  N2000368 Ind A
g  m  n
(Marking on the picture is an example)
(15)Install and stick Amendment label P/N 400383(4) on the Collective Handle as shown below.
Press correctly on the label to ensure a good glueing.
h jk mn  Amdt.  a
(4)
Revision A2  (Date) 2019-07-23  ASB No. ASB-001-00021988AA
Page 11/12
Revision 0 2019-07-25  Page 34/35
This document is available on the Internet: www.airbushelicopters.com/techpub

### Page 35 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC155-67A014
nso  Rue de l'Ambène  NSE
CS 70154
63204 - RIOM
FRANCE
(16)Install and stick Die-Cut Overlaminate Label P/N 403658 (6) above Amendment label P/N 400383 (4) as
shown below.
Press correctly on the label to ensure a good glueing.
(4)
(b)
3.В TEST PROCEDURE
3.B.1 ON AIRCRAFT
Please refer to aircraft manufacturer documentation.
3.B.2 IN REPAIR SHOP
Pending the establishment of CMM 67-19-14, apply the testing part of CMM 67-12-91.
4. ANNEX
None.
Revision A2 (Date) 2019-07-23  ASB No. ASB-001-00021988AA
Page 12/12
Revision 0 2019-07-25  Page 35/35
This document is available on the Internet: www.airbushelicopters.com/techpub

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
