# Airbus Helicopters Alert Service Bulletin EC155-71A015

Copy: No revision named ("Airbus Helicopters ASB No. EC155-71A015 Rev 0"), 13 pages: PDF https://openairdocs.org/files/sha256/b6/59/b659192730ae5d5cdcae2b2bd365dc8d9fd260697168d439383e53af56514e89; text https://openairdocs.org/service-documents/airbus-helicopters/ec155-71a015/file/b659192730ae.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2024-2147, the docket of AD 2025-04-09. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC155-71A015
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec155-71a015

## Text (13 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2024-2147, the docket of AD 2025-04-09. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS  HELICOPTERS
No. EC155-71A015
Civil version(s): B, B1
ALERT SERVICE BULLETIN
CORRECTIVE MEASURE
POWER PLANT - Firewall
Modification of the material of the firewall edging
Related to modification 0771C59
For the attention of
Revision No.  Date of issue
Revision 0  2022-10-25
Summary:
The function of this ALERT SERVICE BULLETIN is to replace the aluminum stiffener on the center firewall with a
titanium stiffener in order to ensure the correct behavior of the central firewall seal in case of fire.
Compliance:
It is mandatory to comply with this ALERT SERVICE BULLETIN.
Revision 0 2022-10-25  Page 1/13
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS  HELICOPTERS
No. EC155-71A015
1. PLANNING INFORMATION
1.A. EFFECTIVITY
CAUTION
MAKE  SURE THAT  THE  MODIFICATIONS
RELATED TO THIS ALERT SERVICE BULLETIN
AGREE WITH THE HELICOPTER CONFIGURATION
AT THIS TIME. IF THE MODIFICATIONS DO NOT
AGREE WITH THE HELICOPTER CONFIGURATION:
- PREPARE  THE NECESSARY ADAPTATION
WORK.
- GET THE APPROVAL BY THE APPLICABLE
LOCAL AIR TRANSPORT AUTHORITIES.
- COMPLY  WITH  THE  AIRWORTHINESS
REQUIREMENTS.
THIS ALERT SERVICE BULLETIN IS WRITTEN FOR
THE INITIAL HELICOPTER CONFIGURATION
SPECIFIED IN THE INDIVIDUAL INSPECTION LOG
BOOK. IT INCLUDES ONLY THE POST-DELIVERY
CONFIGURATION CHANGES WHICH ARE KNOWN
AND APPROVED BY AIRBUS HELICOPTERS.
1.A.1. Helicopters/installed equipment or parts
Helicopter versions B, B1 equipped with stiffener (axial U trimming) P/N: 365A58-1475-20.
1.A.2. Non-installed equipment or parts
Stiffener (axial U trimming) P/N: 365A58-1475-20.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
The investigation following a fire in a left engine compartment highlighted the failure of the upper stiffener of
the central firewall. This part being in aluminum, it can lead to a distortion of the firewall and a loss of
tightness of the central firewall seal if submitted to a fire.
Airbus Helicopters introduces modification 0771C59 to replace the aluminum stiffener on the center firewall
with a titanium stiffener in order to ensure the correct behavior of the central firewall seal in case of fire.
Revision 0 2022-10-25  Page 2/13
This document is available on the Internet: www. airb  elicopters.com/techpub/

### Page 3 (OCR)

AIRBUS  HELICOPTERS
No. EC155-71A015
1.D. DESCRIPTION
This ALERT SERVICE BULLETIN includes the work steps that follow:
- Removal of the aluminum stiffener from the engine firewall
- Installation of the titanium stiffener on the engine firewall.
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Helicopters/installed equipment or parts:
For Airbus Helicopters, it is necessary to comply with the instructions of paragraph 3. of this ALERT
SERVICE BULLETIN before the delivery of the helicopter.
Non-installed equipment or parts:
For Airbus Helicopters, it is necessary to comply with the instructions of paragraph 3. of this ALERT
SERVICE BULLETIN before the delivery of the helicopter
1.E.2. Compliance in service
Helicopters/installed equipment or parts:
It is the operator who does the work on the helicopter.
Comply with paragraph 3. within 600 FH or no later than within 24 months (the first limit you get to is
applicable) after you received this ALERT SERVICE BULLETIN. Refer to the issue date on the page footer.
Non-installed equipment or parts:
When you receive this ALERT SERVICE BULLETIN, discard the stock of part listed in paragraph 1.A.2.
1.F. APPROVAL
Approval of modifications:
The information or instructions relate to modification 0771059, which was approved through
CRD DA07.71C59B Rev.2 on April 04, 2022 under the authority of EASA Design Organization Approval
No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on October 11, 2022 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
Revision 0 2022-10-25  Page 3/13
This document is available on the Internet: www. airb  shelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS  HELICOPTERS
No. EC155-71A015
1.G. MANPOWER
Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this
qualification:
Qualification: 1 Airframe Technician.
The man-hours are an estimate given for information only and for a standard helicopter configuration.
Estimated Man-hours: 7 hours for the Airframe Technician.
The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.
The estimate of the helicopter downtime is one day.
1.H. WEIGHT AND BALANCE
Weight: + 0.06 kg
Moment:
- Longitudinal: + 0.3 m.kg
After you complete the work, record the new weight and moment in your applicable document.
1.I. POWER CONSUMPTION
Not changed.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K. REFERENCES
These documents are necessary to comply with this ALERT SERVICE BULLETIN:
Standard Practices Manual (MTC):
MTC: 20-02-04-401: Installation of rivets - pitch and edge distance - Riveting
MTC: 20-02-04-601: General riveting acceptance requirements - Riveting
MTC: 20-02-05-401: Joining by riveting - Joining
MTC: 20-02-05-404:  Assembly by screws and nuts - Joining
MTC: 20-02-09-101:  Crack detection through dye-penetrant inspection: General
MTC: 20-02-09-601:  Checking structural parts / components using the dye penetrant procedure
MTC: 20-03-01-102:  General repair instructions - Unriveting principle - General repair instructions
MTC: 20-03-02-102: Identification of standardized rivets - General rivet replacement principles
MTC: 20-03-02-406:  Installation of "CHERRY-MAX" ASNA 0077 and 0078 rivets - General rivet
replacement principles
MTC: 20-04-05-402: Application of Primer EPOXY P05-P20 - Paint and primer application procedure
Revision 0 2022-10-25  Page 4/13
This document is available on the Internet: www. airb  elicopters.com/techpub/

### Page 5 (OCR)

AIRBUS  HELICOPTERS
No. EC155-71A015
MTC: 20-05-01-222: Application of PR 1771 B2 sealant - General sealing procedures
MTC: 20-05-01-227: Application of Jointing Compound CA 1010 - General sealing procedures
MTC: 20-07-02-201: Helicopter parked in a repair shop - Safety instructions
MTC: 20-07-03-408: Appearance checks on an aircraft after inspection or repair - Technical instructions
MTC: 20-08-05-103:  Monitoring of parts in operation - marking - service life customization - General rules
applicable to aircraft
Aircraft Maintenance Manual (AMM):
AMM: 53-54-00-061: Removal / Installation - Engine Cowlings
AMM: 71-30-00-961: Replacement of Cowlings Seals on Firewall
Information Notice (IN):
IN 3481-1-00: The Marketplace: an AirbusWorld Ordering service
IN 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight
IN 3686-1-00: Publishing of complementary Instructions for Continued Airworthiness through Delivery Notes
1.L. OTHER AFFECTED PUBLICATIONS
CAUTION
TO  COMPLY WITH THIS ALERT SERVICE
BULLETIN, THE OPERATOR MUST MAKE SURE
THAT ALL THE MAINTENANCE DOCUMENTS
NECESSARY FOR THE MAINTENANCE OF THIS
INSTALLATION ARE AVAILABLE. IF THEY ARE
AVAILABLE, THE  OPERATOR  MUST
CONTACT AIRBUS HELICOPTERS TO GET THESE
DOCUMENTS.
The changes to Instructions for Continued Airworthiness (ICA) which are required as a result of this ALERT
SERVICE BULLETIN will be incorporated in the next Normal Revision.
Refer to DN.105.0003.0 until the information is available in the published technical documentation.
NOTE
You can find more information about Delivery Notes
in Information Notice IN 3686-1-00.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Interchangeability:
PRE MOD and POST MOD components are not interchangeable.
Mixability:
This ALERT SERVICE BULLETIN has no effect on mixability.
Revision 0 2022-10-25  Page 5/13
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS  HELICOPTERS
No. EC155-71A015
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Price
For information about the price of the modification kits and/or components, or for aid, contact the Airbus
Helicopters Network Sales and Customer Relations Department.
Availability
Contact the Sales and Customer Relations Department to know the delivery lead times.
Procurement
Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations
Department:
Airbus Helicopters
Etablissement de Marignane
Direction Ventes et Relations Client
13725 MARIGNANE CEDEX
FRANCE
In the purchase order, write the information that follows:
- The mode of transport
- The destination
- The serial numbers of the helicopters to change.
2.B. LOGISTIC INFORMATION
Not applicable.
Revision 0 2022-10-25  Page 6/13
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 7 (OCR)

AIRBUS  HELICOPTERS
No. EC155-71A015
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Kits to be ordered for one helicopter or one assembly:
Former
Key Word  Qty  New Reference  Item
Reference →  Instruction
FIREWALL  365A07-71C5-9272
RETROFIT KIT
Stiffener  365A58-1475-2151  1  365A58-1475-20  Discard
Rivet blind  NAS1398C3-1  2
Hex. head bolt  17  22125TK050012X
Washer  17  23111CA050  4
Self-locking hex. nut  17  ASN52320BH050N  5
Equipment or parts to be ordered separately:
Former
Key Word  Qty  New Reference  Item
Reference →  Instruction
Bracket  365A58-1102-NY  12  Replace if in
unsatisfactory
condition
Rivet (blind)  2  ASNA0078E403  13
Consumables to be ordered separately:
Refer to the Work Cards and Tasks identified in this ALERT SERVICE BULLETIN or use equivalents.
Key Word  Qty  Reference  Item
Interposition sealant  0.25 L  ECS7009  CM518  11
Sealing compound  0.25 L  ECS0045-3232  CM6068  14
You can send an order for the consumables from the AirbusWorld Marketplace through e-ordering
(IN 3481-1-00).
If you cannot get access to e-ordering, please contact your Logistic Focal Point.
Special tools:
Refer to the Tasks and Work Cards identified in this ALERT SERVICE BULLETIN or use equivalents.
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision 0 2022-10-25  Page 7/13
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 8 (OCR)

AIRBUS  HELICOPTERS
No. EC155-71A015
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- Comply with the general instructions on the installation of rivets, pitch and edge distance. Refer to
Work Card 20-02-04-401 (MTC).
- Comply with the general riveting acceptance requirements. Refer to Work Card 20-02-04-601 (MTC).
- Comply with the general crack detection instructions with dye-penetrant. Refer to
Work Card 20-02-09-101 (MTC)
- Comply with the general checking procedure on the structural parts / components with dye-penetrant.
Refer to Work Card 20-02-09-601 (MTC).
- Comply with the general instructions to join by riveting. Refer to Work Card 20-02-05-401 (MTC).
- Comply with the general instructions on the identification of standardized rivets. Refer to
Work Card 20-03-02-102 (MTC).
Unless specified differently, tighten the bolts to the standard torque. Refer to
Work Card 20-02-05-404 (MTC).
3.B. WORK STEPS
CAUTION
MAKE SURE THAT YOU PREVENT ALL POSSIBLE
FOREIN OBJECT DAMAGE (FOD).
3.B.1. Preliminary steps
- Park the helicopter in a hangar. Refer to Work Card 20-07-02-201 (MTC).
- Disconnect all the electrical power supplies.
- Remove and/or open all applicable cowlings, panels, doors and other items of equipment to get access to
the different work areas
- Remove the cowlings and fairings. Refer to Task 53-54-00-061 (AMM).
3.B.2. Procedure
NOTE 1
Cutout and drilling: Work Card 20-04-04-401 (MTC) gives
information on deburring and protection.
NOTE 2
Paint touch-ups are the responsibility of the operator. You
will find information in Work Card 20-04-05-402 (MTC).
Revision 0 2022-10-25  Page 8/13
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 9 (OCR)

AIRBUS  HELICOPTERS
No. EC155-71A015
3.B.2.a. Removal of the aluminum stiffener from the firewall (Figure 1)
Refer to DETAIL A, DETAIL C, DETAIL D and DETAIL E:
- Remove the rivets (c) from the stiffener (a). Refer to Work Card 20-03-01-102 (MTC).
- If the center rivet (d) is installed on the gusset (e) (DETAIL C):
. Remove the rivet (d). Refer to Work Card 20-03-01-102 (MTC).
- Remove and discard (DETAIL B):
• The stiffener (a)
. The bolts (b)
The washers (i)
• The nuts (k).
- Remove and keep (DETAIL A, DETAIL B):
. The cover strip (g)
• The clamps (m).
- If the bracket (f) is in unsatisfactory condition (DETAIL D):
• Remove the rivet (n)
• Remove and discard the bracket (f).
3.B.2.b. Installation of the titanium stiffener on the firewall (Figure 2)
- Put in position the stiffener (1) on the firewall to agree with the existing holes.
- If there is a hole (A) on the gusset (e) (DETAIL A):
. Counter-drill the hole (A) to 2.4 mm diameter on the stiffener (1).
- Counterdrill the holes (B) to 5,5 mm diameter to agree with the existing firewall holes.
- Counterdrill the holes (C) to 2,4 mm diameter to agree with the existing firewall holes.
- Deburr and apply protection with interposition sealant (11) to the holes (A), (B) and (C).
Refer to Work Card 20-05-01-227 (MTC).
- If the bracket (f) is removed:
• Replace it with a new bracket (12) (SECTION B-B). Refer to paragraph 2.C.
. Install the new bracket (12) on the firewall with rivets (13).
- Install all the rivets (2) on the stiffener (1), the gusset (e) and the bracket (12) or (f) with the sealing
compound (14) (DETAIL A and DETAIL C).
Refer to Work Card 20-03-02-406 (MTC) and Work Card 20-05-01-222 (MTC).
- Do a check of the cover strip (g) and the fireproof seal (h) to replace if necessary (SECTION B-B).
Refer to Work Card 71-30-10-702 (AMM).
- Install the stiffener (1), the cover strip (g) and the seal (h) (DETAIL A, DETAIL C and SECTION B-B) with:
• The bolts (3)
. The washers (4)
. The nuts (5)
The clamps (m) (not shown)
. The sealing compound (14). Refer to Work Card 20-05-01-222 (MTC).
Revision 0 2022-10-25  Page 9/13
This document is available on the Internet: www.airbu  shelicopters.com/techpub/

### Page 10 (OCR)

AIRBUS  HELICOPTERS
No. EC155-71A015
CAUTION
MAKE SURE THAT THE ENGINE FIXED COWLING
IS IN CONTACT WITH THE FIREPROOF SEAL (h).
IF NECESSARY, ADJUST THE POSITION OF THE
SEAL (h).
- Tighten the bolts (3) to the standard torque.
3.B.3. Final steps
- Clean and apply the close-up procedure to the work areas and the helicopter.
Refer to Work Card 20-07-03-408 (MTC).
- Install or close all cowlings, panels, doors and items of equipment that you removed and/or opened during
the preliminary steps (paragraph 3.B.1. of this ALERT SERVICE BULLETIN).
- Install the cowlings and fairings. Refer to Task 53-54-00-061 (AMM).
- Remove the access equipment.
- Connect all the electrical power supplies.
- Set the helicopter to flight condition.
3.C. RECORD OF COMPLIANCE
Compliance with this document:
- Record the full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the
helicopter documents.
- Record the full compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):
QR code or hypertext link
NOTE 3
The recording of compliance with ALERT SERVICE
BULLETINS in the SB Insight tool does not replace the
recording in the helicopter documents.
ASB EC155-71A015
Tracking of modifications in the documentation:
Record the modification 0771C59 in the helicopter documents.
Identification of modifications on equipment or parts:
Identify the parts. Refer to the table below and Work Card 20-08-05-103 (MTC).
Key Word  Former P/N  New Reference  MOD  Marking type
Firewall  365A58-1450-0702  365A58-1450-0703  0771C59  Indelible ink
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Revision 0 2022-10-25  Page 10/13
This document is available on the Internet: www. airb  shelicopters.com/techpub/

### Page 11 (OCR)

AIRBUS  HELICOPTERS
No. EC155-71A015
PRE MOD
D
m
Back to paragraph 3.B.2.a.
Figure 1
Revision 0 2022-10-25  Page 11/13
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 12 (OCR)

AIRBUS  HELICOPTERS
No. EC155-71A015
PAGE КЕРТ BLANK DELIBERATELY
Revision 0 2022-10-25  Page 12/13
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 13 (OCR)

AIRBUS  HELICOPTERS
No. EC155-71A015
POST MOD
в¢)
в¢)
Z-1780
SECTION
B-B
for 12
Back to paragraph 3.B.2.b.
Figure 2
Revision 0 2022-10-25  Page 13/13
This document is available on the Internet: www.airbushelicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
