# Eurocopter Alert Service Bulletin EC225-05A030

Copy: No revision named ("Eurocopter ASB No EC225-05A030"), 20 pages: PDF https://openairdocs.org/files/sha256/7e/10/7e10888a658fa060be09bf1b7ae1fb1b4dd6d4e03aed687b86ed7eb64cb76f32; text https://openairdocs.org/service-documents/airbus-helicopters/ec225-05a030/file/7e10888a658f.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-0635; AD 2013-26-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md) (issued as Eurocopter)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC225-05A030
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec225-05a030

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2013-26-11](https://openairdocs.org/ad/2013-26-11.md), effective Feb 18, 2014: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus-helicopters/ec225-05a030/proposed.md).

## Text (20 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-0635; AD 2013-26-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
Civil version(s): LP
ALERT SERVICE BULLETIN
SUBJECT: TIME LIMITS - MAINTENANCE CHECKS - Main rotor mast assembly
Inspection of the swashplate sub-assembly
ATA: 62
For the attention of
Revision number  Date of issue
Revision 0  2012-07-12
Summary:
Following the reporting of corrosion on the seating faces of the swashplate bearing retaining flanges, the present
ALERT SERVICE BULLETIN introduces an inspection of the swashplate sub-assembly.
Application:
EUROCOPTER specifies that compliance with this ALERT SERVICE BULLETIN is mandatory.
Revision 0 2012-07-12  Page 1/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 2 (OCR)

- EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/Installed equipment
On Main Rotor Mast assembly:
- Fitted with a rotating swashplate, Part No. (MP/N) 332A31-3074-00 or 332A31-3076-00
and
- Fitted with a stationary swashplate, Part No. (MP/N) 332A31-3079-00 or 332A31-3079-01
and
- One of whose two swashplates (rotating or stationary) is more than two years old since new or since the
last repair in a D-level approved maintenance center (see Log Card).
NOTE 1
Refer to the Log Cards (FM) to identify the actual
configuration of the helicopter.
NOTE 2
For swashplate sub-assemblies that are less than two years
old since new or since repair in a D-level approved
maintenance center (see Log Card), this ALERT SERVICE
BULLETIN will be applicable when reaching two years.
1.A.2. Non-installed equipment
On Main Rotor Mast assembly:
- Fitted with a rotating swashplate, Part No. (MP/N) 332A31-3074-00 or 332A31-3076-00
and
- Fitted with a stationary swashplate, Part No. (MP/N) 332A31-3079-00 or 332A31-3079-01,
and
- One of whose two swashplates (rotating or stationary) is more than two years old since new or since last
repair in a D-level approved maintenance center (see Log Card).
NOTE 3
Refer to the Log Cards (FM) to identify the actual
configuration of the helicopter.
NOTE 4
For swashplate sub-assemblies that are less than two years
old since new or since repair in a D-level maintenance
center (see Log Card), this ALERT SERVICE BULLETIN will
be applicable when reaching two years.
Revision 0 2012-07-12  Page 2/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 3 (OCR)

- EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
When reconditioning Main Rotor Mast assemblies, EUROCOPTER recently identified the presence of
corrosion on the rotating and stationary swashplates, located under the retaining flanges of the bearing of
the swashplate sub-assembly.
As this corrosion, in time, could result in the initiation of a crack, EUROCOPTER makes compliance with this
ALERT SERVICE BULLETIN mandatory.
Additionally, EUROCOPTER hereby informs you of the introduction of modification 07 43728 which improves
the anti-corrosion protection of the rotating and stationary swashplates, as well as extending the service life
of the stationary swashplate following embodiment of modification 07 43728.
This modification is embodied on a routine basis in the event of the return of the Main Rotor Mast assembly
to a D-level approved repair station.
Following embodiment of this modification, the swashplates change part number and are therefore no longer
subject to compliance with this ALERT SERVICE BULLETIN:
MP/N pre MOD 07 43728  MP/N post MOD 07 43728
(subject to this ALERT SERVICE  (not subject to this ALERT
BULLETIN)  SERVICE BULLETIN)
332A31-3074-00
Rotating swashplate  332A31-3074-01
332A31-3076-00
332A31-3079-00
Stationary swashplate  332A31-3079-01  332A31-3079-02
Moreover, only those swashplate sub-assemblies which are more than 2 years old since new or the last
repair are concerned by the supplementary maintenance actions specified in paragraph 1.E.2.
If the swashplate sub-assembly has been disassembled in a D-level approved repair station (for example,
to replace a stationary swashplate on reaching its service life limit), the rotating and stationary swashplates
will have been inspected for corrosion.
Consequently, it is possible to wait 2 years after assembly before checking the absence of corrosion on the
swashplates.
1.D. DESCRIPTION
Compliance with this ALERT SERVICE BULLETIN consists in inspecting the rotating and stationary
swashplates and, if necessary, in sending the main rotor mast assembly for reconditioning of its
swashplate sub-assembly and embodiment of modification 07 43728 during the reconditioning operation.
1.E. COMPLIANCE
EUROCOPTER specifies that compliance with this ALERT SERVICE BULLETIN is mandatory.
1.E.1. Compliance at the works
Not applicable.
Revision 0 2012-07-12  Page 3/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 4 (OCR)

→ EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
1.E.2. Compliance in operation
The work is to be performed by the operator on helicopters and on uninstalled equipment.
Helicopters/Installed equipment:
For the Main Rotor Mast assemblies listed in paragraph 1.A.1
- For main rotor mast assemblies equipped with swashplates having logged less than 1210 flying
hours since new or since the last repair of the swashplate sub-assembly in a D-level approved
maintenance center (see the log card):
NOTE 5
For helicopters involved in water-bombing missions
EUROCOPTER points out the corrective coefficient factors
described in chapter 5.99 of the Maintenance Program:
- Rotating swashplate MP/N 332A31-3076-00: 1.75,
- Stationary swashplate MP/N 332A31-3074-00: 2.4.
NOTE 6
For helicopters operating in very cold weather conditions,
EUROCOPTER points out the corrective multiplication
factors described in chapter 5.99 of the Maintenance
Program:
- Rotating swashplate Part No. 332A31-3076-00: 3.6,
- Rotating swashplate Part No. 332A31-3074-00: 3.7,
- Stationary swashplate Part No.332A31-3079-00: 2.1,
- Stationary swashplate Part No.332A31-3079-01: 2.1.
. Apply paragraphs 3.B.1. to 3.B.4. of this ALERT SERVICE BULLETIN no later than when a total
of 1320 flying hours has been achieved.
Then,
. Apply paragraphs 3.B.1. to 3.B.4. every 1320 flying hours for a visual inspection of the swashplates to
check the absence of corrosion and cracking on the swashplates.
Revision 0 2012-07-12  Page 4/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 5 (OCR)

→ EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
If corrosion is found without any visual indication of cracking:
- For helicopters operating in very cold weather conditions (outside air temperature (OAT) below -30°C):
. before the next flight and pending application of paragraph 3.B.5. (replacement of the main rotor mast
assembly) affix a locally made label to the instrument panel prohibiting flight in very cold weather
conditions (OAT below -30°C),
. within 150 flying hours or 6 months (the first limit reached is applicable) following discovery of the
corrosion, apply paragraph 3.B.5 (replacement of the main rotor mast assembly).
- For helicopters not operating in very cold weather conditions:
• within 150 flying hours or 6 months (the first limit reached is applicable) following discovery of the
corrosion, apply paragraph 3.B.5 (replacement of the main rotor mast assembly).
In the event of a visual indication of a crack, apply paragraph 3.B.5. (replacement of the main rotor mast
assembly) before resuming flights.
- For main rotor mast assemblies equipped with swashplates having logged 1210 flying hours or
more since new or since the last repair of the swashplate sub-assembly in a D-level approved
maintenance center (see the log card):
NOTE T
For helicopters  involved in water-bombing missions
EUROCOPTER points out the corrective multiplication factors
described in chapter 5.99 of the Maintenance Program:
- Rotating swashplate MP/N 332A31-3076-00: 1.75,
- Rotating swashplate MP/N 332A31-3074-00: 2.4
NOTE 8
For helicopters operating in very cold weather conditions,
EUROCOPTER points out the corrective multiplication factors
described in chapter 5.99 of the Maintenance Program:
- Rotating swashplate MP/N 332A31-3076-00: 3.6,
- Rotating swashplate MP/N 332A31-3074-00: 3.7,
- Stationary swashplate MP/N 332A31-3079-00: 2.1,
- Stationary swashplate MP/N 332A31-3079-01: 2.1
• Apply paragraphs 3.B.1. to 3.B.4. of this ALERT SERVICE BULLETIN within 110 flying hours following
receipt of this ALERT SERVICE BULLETIN, issued on the date indicated at the bottom of the page.
Then,
. Apply paragraphs 3.B.1. to 3.B.4. of this ALERT SERVICE BULLETIN every 1320 flying hours to
visually check the absence of corrosion and cracking on the swashplates.
Revision 0 2012-07-12  Page 5/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 6 (OCR)

→ EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
If corrosion is found without any visual indication of cracking:
- For helicopters operating in very cold weather conditions (outside air temperature (OAT) below -30°C):
. before the next flight and pending application of paragraph 3.B.5. (replacement of the main rotor mast
assembly) affix a locally made label to the instrument panel prohibiting flight in very cold weather
conditions (OAT below -30°C),
. within 150 flying hours or 6 months (the first limit reached is applicable) following discovery of the
corrosion, apply paragraph 3.B.5 (replacement of the main rotor mast assembly).
- For helicopters not operating in very cold weather conditions:
• within 150 flying hours or 6 months (the first limit reached is applicable) following discovery of the
corrosion, apply paragraph 3.B.5 (replacement of the main rotor mast assembly).
In the event of visual indication of a crack, apply paragraph 3.B.5. (replacement of the main rotor mast
assembly) before resuming flights.
NOTE 9
Reminder of the general instructions in the PRE: the date to
be considered is the date of the first installation or the first
removal from storage as recorded on the log card.
Non-installed equipment:
- For the main rotor mast assemblies listed in paragraph 1.A.1:
• Apply paragraph 3.B.6. of the present ALERT SERVICE BULLETIN before installation on the helicopter.
NOTE 10
Reminder of the general instructions in the PRE: the date to
be considered is the date of the first installation or the first
removal from storage as recorded on the log card.
1.F. APPROVAL
Approval of modifications:
Not applicable.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on July 11, 2012 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of
civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on July 11, 2012 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French
Government helicopters.
Revision 0 2012-07-12  Page 6/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 7 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
1.G. MANPOWER
EUROCOPTER recommends that compliance with this ALERT SERVICE BULLETIN is ensured by
personnel qualified as follows:
Qualification: about 2 Mechanical Engineering Technicians.
The time for the operations is given for information purposes, for a standard configuration.
Time for the operations: approximately 4 hours for 2 Mechanical Engineering Technicians to inspect the
swashplates.
1.H. WEIGHT AND BALANCE
Not applicable.
1.1. EFFECT ON ELECTRICAL LOADS
Not applicable.
1.J. SOFTWARE MODIFICATION EMBODIMENT STATE
Not applicable.
1.K. REFERENCES
The following documents are required for compliance with this ALERT SERVICE BULLETIN.
MMA: 62-00-00-611: Main Rotor - Routine servicing instructions
MMA: 62-10-00-061: Main rotor blades - Removal - Installation
MMA: 62-20-00-021: Main Rotor Mast assembly - Removal
MMA: 62-20-00-421: Main Rotor Mast assembly - Installation
MMA: 62-20-00-621: Main Rotor Mast - Storage
MMA: 62-20-00-361: Main Rotor Mast - Removal from storage
MTC: 20.01.01.301: Use of greases
MTC: 20.02.05.404: Standard practices - Joining by bolts and nuts
MTC: 20.02.06.402: Standard practices - Safetying with lockwire
MTC: 20.04.01.401: Standard practices - Cleaning of mechanical parts
MTC: 20.05.01.222: Standard practices - Application of PR 1771 B2 sealant
1.L. DOCUMENTS AFFECTED
Not applicable.
1.M. INTERCHANGEABILITY OR MIXABILITY OF PARTS
Not applicable.
Revision 0 2012-07-12  Page 7/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 8 (OCR)

→ EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
2. MATERIAL INFORMATION
2.A. MATERIAL: PRICE - AVAILABILITY - PROCUREMENT
Price
For any information concerning the kits and/or components, contact the EUROCOPTER Network Sales and
Customer Relations Department.
Availability
The kits and/or components will be supplied on customer's order.
Procurement procedure
Order as required (unless specified otherwise)
from
EUROCOPTER
Etablissement de Marignane
Direction Ventes et Relations Client (ECR)
13725 MARIGNANE CEDEX
FRANCE
NOTE 1
On the purchase order, please always specify the mode of
transport, the destination and the serial numbers of the
helicopters to be modified.
NOTE 2
For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F
Fax: +33 (0)4.42.85.99.96.
2.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT
Not applicable.
2.C. MATERIAL REQUIRED FOR EACH HELICOPTER/COMPONENT
Kits or components to be ordered for one helicopter or one assembly:
Designation  Qty  New part number  Item  Old part number  Instruction
Nut  30  ASN52320BH080N
Revision 0  2012-07-12  Page 8/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 9 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
Products to be ordered separately:
In accordance with the Work Cards and Tasks quoted in the present ALERT SERVICE BULLETIN and listed
below:
Designation  Qty  Material reference  CM  Item
Lockwire  AIR  EN3628-080  CM776  2
Mastinox  AVR  6856K  CM518  3
Grease  A/R  G354  CM115  4
Sealing compound  AIR  PR1771-B2  CM6068  5
These products may be ordered separately from INTERTURBINE AVIATION LOGISTICS.
Internet address:  http://www.interturbine.com
Telephone:  +49.41.91.809.300
AOG:  +49.41.91.809.444
Material required for non-installed components:
Order as required the materials listed in paragraph 2.C. Kits and/or components to be ordered for one
helicopter or for one Main Rotor Mast assembly.
2.D. MATERIAL TO BE RETURNED
Return the Main Rotor Mast assembly in accordance with the procedure described in Service
Letter 1567-00-02 specifying on the documents "Returned following compliance with ALERT SERVICE
BULLETIN 05A030".
Revision 0 2012-07-12  Page 9/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 10 (OCR)

- EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- Read and apply the instructions on the use of greases, in accordance with MTC Work Card 20.01.01.301
- Read and apply the instructions on joining by bolts and nuts, in accordance with MTC Work
Card 20.02.05.404.
NOTE 1
The tightening torque of the screws (f), (Figures 1 and 2)
and the nuts (1), (Figure 2) includes the correction factor for
the grease (4) (correction factor = 0.50).
- Read and apply the instructions on safetying with lockwire, in accordance with MTC Work
Card 20.02.06.402.
- Read and apply the instructions on cleaning of mechanical parts, in accordance with MTC Work
Card 20.04.01.401.
- Read and apply the routine servicing instructions in accordance with MMA Task 62-00-00-611.
- The procedure described in paragraph 3.B.2. differentiates between swashplates and those which do not
have modification 07 43705 embodied.
NOTE 2
The embodiment of modification 07 43705 consists in
changing the material and the design of the swashplates.
MP/N pre-MOD 07 43705  MP/N post MOD 07 43705
Rotating swashplate  332A31-3076-00  332A31-3074-00
Stationary swashplate  332A31-3079-00  332A31-3079-01
3.B. OPERATIONAL PROCEDURE
3.B.1. Preliminary steps
- Install access equipment.
- Open the sliding cowling.
- Open the engine cowlings.
- Install the engine cowling working platform.
- Remove the main rotor blades in accordance with MMA Task 62-10-00-061.
3.B.2. Removal of the stationary and rotating swashplate bearing retaining flanges
3.B.2.a. Removal of the stationary swashplate bearing flange (d), (Figure 1 and 2)
- Using a spatula, remove the seal from the inside edge of the stationary swashplate bearing flange (d),
(Figures 1 and 2),
CAUTION
BEFORE REMOVING THE BEARING FLANGES FROM
THE STATIONARY (d) AND ROTATING (a)
FLANGES RELATIVE TO THEIR RESPECTIVE -
SWASHPLATE.
Revision 0 2012-07-12  Page 10/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 11 (OCR)

→ EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
- Remove and discard the lockwire from the screws (f) of the stationary swashplate bearing flange (d),
- Remove the screws (f) and washers (e),
- Remove the stationary swashplate bearing flange (d).
NOTE 3
To facilitate removal of the rotating swashplate bearing
flange (a), the stationary swashplate flange (d) may remain
attached and suspended (for example using lockwire or
binding clamps) to the rotating scissors on the rotor mast.
3.B.2.b. Removal of the rotating swashplate bearing flange (a), (Figure 1)
- For helicopters equipped with swashplates which do not have modification 07 43705 embodied
(Figure 1):
. Use a spatula to remove the seal from the outer edge of the rotating swashplate bearing flange (a).
Remove and discard the lockwire from the screws (f) of the rotating swashplate bearing flange (a).
. Remove the screws (f) and the washers (e).
• Remove the rotating swashplate bearing flange (a).
- For helicopters equipped with swashplates which have modification 07 43705 embodied (Figure 2):
. Use a spatula to remove the seal from the outer edge of the rotating swashplate bearing flange (a).
. Remove and discard the lockwire from the bolts (k) of the rotating swashplate bearing flange (a).
. Remove the nuts (h) and the washers I).
. Remove the bolts (k) and the washers ().
• Remove the rotating swashplate bearing flange (a).
NOTE 4
To facilitate inspection for the absence of corrosion or
cracking of the rotating and stationary swashplates, the
rotating swashplate bearing flange (a), may remain attached
and suspended (for example using lockwire or binding
clamps) to the rotating scissors of the rotor mast.
3.B.3. Check of the absence of corrosion and cracking
- Using a dry cloth, clean the zones to be inspected on the rotating swashplate (b) and the stationary
swashplate (c), (Figure 3).
CAUTION
THE USE OF PENETRANT DYES TO CHECK THE
ABSENCE OF CRACKS ON THE SURFACES OF THE
STATIONARY AND ROTATING SWASHPLATES IS
PROHIBITED
- Inspect visually to check the absence of corrosion and cracking (using a magnifying glass for example) on
the surface of the rotating swashplate (b) and the stationary swashplate (c).
Revision 0 2012-07-12  Page 11/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 12 (OCR)

→ EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
Interpretation of the results:
- If no corrosion and no cracks are found:
Install the bearing flanges in accordance with paragraph 3.B.4.
• Resume flights.
- If corrosion is found with no visual signs of cracking:
Install the bearing flanges in accordance with paragraph 3.B.4.
• Replace the main rotor mast assembly in accordance with paragraph 3.B.5. in accordance with the
instructions in paragraph 1.E.2.
• Return the Main Rotor Mast assembly in accordance with paragraph 2.D.
- If cracking is found:
Install the bearing flanges in accordance with paragraph 3.B.4.
Replace the main rotor mast assembly in accordance with paragraph 3.B.5. before resuming flights.
. Return the Main Rotor Mast assembly in accordance with paragraph 2.D.
3.B.4. Installation of the stationary and rotating swashplate bearing flanges
3.B.4.a. Installation of the rotating swashplate bearing flange (a), (Figures 1, 2, 4 and 5)
- For helicopters equipped with swashplates which do not have modification 07 43705 embodied
(Figure 1):
. Apply Mastinox (3) to the rotating swashplate bearing flange (a), (Figure 1).
CAUTION
ENSURE CORRECT POSITIONING OF THE ROTATING
SWASHPLATE BEARING FLANGE RELATIVE TO THE
SPIGOTS ON THE SWASHPLATE BEARING (FIGURE 5).
• Position the rotating swashplate bearing flange (a).
• Apply Mastinox (3) to the washers (e).
. Position the washers (e).
• Using grease (4) lubricate the threads of the screws (f).
• Position the screws (f).
CAUTION
WHEN  TORQUE-TIGHTENING THE ATTACHMENT
SCREWS (f) ON THE ROTATING SWASHPLATE
BEARING FLANGE (a) COMPLY WITH THE TIGHTENING
SEQUENCE INDICATED IN FIGURE 4.
. Tighten the screws (f) to the torque indicated in Figure 1 (cf. NOTE 1 paragraph 3).
• Using lockwire (2), safety the attachment screws (f) of the rotating swashplate bearing flange (a).
. Lubricate the seal (g), (Figure 1) with grease (4).
. Apply a bead of sealing compound (5) to the external edge of the rotating swashplate bearing
flange (a) in accordance with MTC Work Card 20.05.01.222.
- For helicopters equipped with swashplates which have modification 07 43705 embodied (Figure 2):
. Apply Mastinox (3) to the rotating swashplate bearing flange (a) (Figure 2).
Revision 0 2012-07-12  Page 12/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 13 (OCR)

- EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
CAUTION
ENSURE CORRECT POSITIONING OF THE SPIGOTS ON
THE ROTATING SWASHPLATE BEARING FLANGE (a)
RELATIVE TO THE SPIGOTS ON THE SWASHPLATE
BEARING (FIGURE 5).
. Position the rotating swashplate bearing flange (a) (Figure 2).
. Apply Mastinox (3) to the washers (i) and the bolts (k).
. Position the washers (j) and the bolts (k).
. Apply Mastinox (3) to the washers (j).
. Using grease (4) lubricate the threads of the nuts (1).
. Position the nuts (1).
CAUTION
WHEN TORQUE-TIGHTENING THE ATTACHMENT NUTS
(1) ON THE ROTATING SWASHPLATE BEARING
FLANGE (a) COMPLY WITH  THE TIGHTENING
SEQUENCE INDICATED IN FIGURE 4.
• Tighten the nuts (1) to the torque indicated in Figure 2 (cf. NOTE 1 paragraph 3).
NOTE 5
The procedure for measuring the locking torque of the nuts
(1) is indicated in MTC Work Card 20.02.05.404.
. Using lockwire (2) safety the attachment bolts (k) of the rotating swashplate bearing flange (a).
NOTE 6
The holes in the bolt heads (k) must be orientated such that
the lockwire (2) is always in tension between the bolts (k).
. Lubricate the seal (g), with grease (4).
. Apply a bead of sealing compound (5) to the external edge of the rotating swashplate bearing
flange (a) in accordance with MTC Work Card 20.05.01.222.
3.B.4.b. Installation of the stationary swashplate bearing flange (d), (Figures 1, 2, 4 and 5)
- Apply Mastinox (3) to the stationary swashplate bearing flange (d), (Figures 1 and 2).
Revision 0 2012-07-12  Page 13/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 14 (OCR)

- EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
CAUTION
NOTE THE POSITIONING OF THE SPIGOTS ON THE
STATIONARY  SWASHPLATE BEARING FLANGE
RELATIVE TO THE SPIGOTS ON THE SWASHPLATE
BEARING (FIGURE 5).
CAUTION
IN ORDER TO AVOID DAMAGING THE SEAL (g)
DURING  INSTALLATION OF THE STATIONARY
SWASHPLATE BEARING FLANGE (d), THE LATTER
SHOULD BE INTRODUCED INCLINED, AND NOT FLAT.
- Introduce the stationary swashplate bearing flange (d).
NOTE 7
After installing the attachment screw (f) finger-tight in
position No. 1 (m), (Figure 4), a rotary motion of the rotor
mast assembly whilst exerting a pressure from the top
downwards on the stationary swashplate bearing flange (d)
opposite to position No. 1 (m) will facilitate its installation.
- Position the stationary swashplate bearing flange (d).
- Position the washers (e), (Figures 1 and 2).
CAUTION
WHEN TORQUE-TIGHTENING  • THE ATTACHMENT
SCREWS (f) ON THE STATIONARY SWASHPLATE
BEARING FLANGE (d) COMPLY WITH THE TIGHTENING
SEQUENCE INDICATED IN FIGURE 4.
- Using grease (4) lubricate the threads of the screws (f), (Figures 1 and 2).
- Position the screws (f).
- Tighten the screws (f) to the torque indicated in Figures 1 and 2 (cf. NOTE 1, paragraph 3).
- Using lockwire (2), safety the attachment screws (f) of the stationary swashplate bearing flange (d).
- Apply a bead of sealing compound (5) to the inner edge of the stationary swashplate bearing flange (d)
in accordance with MTC Work Card 20.05.01.222.
3.B.5. Replacement of the main rotor mast assembly
- Remove the main rotor mast assembly in accordance with Task 62-20-00-221 of the AMM.
- Install a new main rotor mast assembly in accordance with Task 62-20-00-421 of the AMM.
3.B.6. Operational procedure for non-installed equipment
- De-store the Main Rotor mast assembly in accordance with MMA Task 62-20-00-631.
- Apply paragraphs 3.B.2., 3.B.3 et 3.B.4.
- Store the Main Rotor mast assembly in accordance with MMA Task 62-20-00-621.
Revision 0 2012-07-12  Page 14/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 15 (OCR)

→ EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
3.B.7. Final steps
- Install the main rotor blades in accordance with MMA Task 62-10-00-061.
- Remove the engine cowling working platform.
- Close the engine cowlings.
- Close the sliding cowling.
- Remove the access equipment.
3.C. IDENTIFICATION
Identification of this document:
Record compliance with this ALERT SERVICE BULLETIN with the revision number on the Log Card.
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Revision 0 2012-07-12  Page 15/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 16 (OCR)

- EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
d
C
B-B
10207
G 354  G 354
1.3-1.7 daN.m  1.3-1.7 daN.m
115-150.5 Ibf.in  115-150.5 Ibf.in
G 354
- 5
Figure 1: Rotating swashplates pre-modification 07 43705
Revision 0 2012-07-12  Page 16/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 17 (OCR)

→ EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
SÇA
C-C
G 354  G 354
.,3-1.7 daN.m  0.65-0.8 daN.m
115-150.5 Ibf.in  57.5-71 Ibf.in
G 354
g
5
k
2
3
Figure 2: Rotating swashplates post modification 07 43705
Revision 0 2012-07-12  Page 17/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 18 (OCR)

• EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
zone to be inspected
Figure 3: Zone to be inspected on the rotating and stationary swashplates
Revision 0 2012-07-12  Page 18/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 19 (OCR)

→ EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
23 9 11 3 7 19 25  21
27
13
30  5
18
10  9
28
22 26 29 16 8 4  20
12
16
m
22
13
021
15  10
18%  • C
12 20 25 23
Figure 4: Torque tightening sequence for the attachment bolts
Revision 0 2012-07-12  Page 19/20
This document is available on the internet: www.eurocopter.com/techpub

### Page 20 (OCR)

→ EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A030
Figure 5: Locating spigots
Revision 0 2012-07-12  Page 20/20
This document is available on the internet: www.eurocopter.com/techpub

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
