# Eurocopter Alert Service Bulletin EC225-05A031

Copy: Revision 1 ("U.S. DOT/FAA - Eurocopter ASB EC225-05A031, Revision 1"), 10 pages: PDF https://openairdocs.org/files/sha256/ae/e7/aee7b84841a241839ceef85e10433d26de78a9d82724c50da5c65b418747ea90; text https://openairdocs.org/service-documents/airbus-helicopters/ec225-05a031/file/aee7b84841a2.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-0872; AD 2014-05-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md) (issued as Eurocopter)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC225-05A031
- Latest revision known: EC225-05A031, Revision 1, dated June 5, 2013 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec225-05a031

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2014-05-11](https://openairdocs.org/ad/2014-05-11.md), effective Apr 15, 2014: Revision 1

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus-helicopters/ec225-05a031/proposed.md).

## Text (10 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-0872; AD 2014-05-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A031
Civil version(s): LP
ALERT SERVICE BULLETIN
SUBJECT: TIME LIMITS - MAINTENANCE CHECKS
Check of tail rotor control turnbuckle
ATA: 67 Rotor Flight Controls
For the attention of
Revision No.  Date of issue
Revision 0  2013-03-14
Revision 1  2013-06-05
Summary:
The purpose of this ALERT SERVICE BULLETIN is to carry out a visual check for absence of corrosion or crack(s)
on the tail rotor control turnbuckles.
Reason for last Revision:
The purpose of Revision 1 of this ALERT SERVICE BULLETIN is to specify that the replacement of the turnbuckle
related to external corrosion of less than or equal to 0.3 mm is carried out within 6 months following the last
compliance with paragraph 3.B.2.c of this ALERT SERVICE BULLETIN.
Compliance:
Compliance with this ALERT SERVICE BULLETIN is mandatory.
Revision 0 2013-03-14  Page 1/10
Revision 1 2013-06-05  This document is available on the internet: www.eurocopter.com/techpub

### Page 2 (OCR)

→ EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A031
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment
All EC225 helicopters equipped with turnbuckles P/N 330A27-5031-20.
1.A.2. Non-installed equipment
On turnbuckles P/N 330A27-5031-20.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Revision 0:
EUROCOPTER has been informed of the rupture of one of the tail rotor control turnbuckles due to corrosion
damage. The damage was discovered during a flight control check after a MGB replacement. Investigation
revealed that missing Mastinox sealant between the turnbuckle tappings and end-fittings led to formation of
galvanic corrosion.
In case of corrosion, tail rotor control turnbuckles may break and lead to loss of tail rotor control on the
helicopter. In order to prevent a similar occurrence, EUROCOPTER makes it mandatory to check all the tail
rotor control turnbuckles to make sure there is no corrosion or crack.
In addition, EUROCOPTER makes the visual check on the turnbuckles every 12 months mandatory.
Revision 1:
The purpose of Revision 1 of this ALERT SERVICE BULLETIN is to specify that the replacement of the
turnbuckle related to external corrosion of less than or equal to 0.3 mm is carried out within 6 months
following the last compliance with paragraph 3.B.2.c of this ALERT SERVICE BULLETIN.
Revision 1 of this ALERT SERVICE BULLETIN does not affect compliance with Revision 0.
1.D. DESCRIPTION
This ALERT SERVICE BULLETIN consists of:
- A visual check on all tail rotor control turnbuckles to make sure there is no corrosion or crack.
Revision 0 2013-03-14  Page 2/10
Revision 1 2013-06-05  This document is available on the internet: www.eurocopter.com/techpub

### Page 3 (OCR)

* EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A031
1.E. COMPLIANCE
1.E.1. Compliance at the works
Helicopters/installed equipment:
Not applicable.
Non-installed equipment:
Not applicable.
1.E.2. Compliance in service
Helicopters/installed equipment:
1) For helicopters delivered before 01/03/2013:
Comply with paragraphs 3.A., 3.B.1. and 3.B.2.a. of this ALERT SERVICE BULLETIN, within 110 flying hours
or no later than within 3 months from receipt of this ALERT SERVICE BULLETIN Revision 0, issued on the
date mentioned in the page footer.
Following compliance with paragraph 3.B.2.a., interpret the results for each of the two turnbuckles:
- If there are cracks or corrosion, replace the turnbuckle as per paragraph 3.B.2.d. before resuming
flights.
- If there are no cracks and no corrosion, comply with paragraph 3.B.2.b.1.
Following compliance with paragraph 3.B.2.b.1., interpret the results:
- If there are cracks, replace the turnbuckle as per paragraph 3.B.2.d. before resuming flights.
- If there are no cracks and no corrosion, reinstall the turnbuckle as per paragraph 3.B.3. before resuming
flights.
- If there are no cracks but corrosion is found, comply with paragraph 3.B.2.b.2.
Following compliance with paragraph 3.B.2.b.2., interpret the results:
If there is corrosion to a depth of over 0.3 mm. replace the turnbuckle as per paragraph 3.B.2.d. before
resuming flights.
If there is corrosion to a depth less than, or equal to 0.3 mm:
Carry out corrosion treatment as per paragraph 3.B.2.c.
Reinstall the turnbuckle as per paragraph 3.B.3. before resuming flights.
• Replace the turnbuckle as per paragraph 3.B.2.d. within 6 months following the last compliance with
paragraph 3.B.2.c. of this ALERT SERVICE BULLETIN.
NOTE
A flow chart describing compliance with paragraph 3. and used
to interpret the results is also available in Appendix 1.
Then,
Comply with paragraph 3. at intervals not exceeding 12 months.
2) For helicopters delivered on or after 01/03/2013:
Comply with paragraph 3. at intervals not exceeding 12 months.
Revision 0 2013-03-14  Page 3/10
Revision 1 2013-06-05  This document is available on the internet: www.eurocopter.com/techpub

### Page 4 (OCR)

- EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A031
Non-installed equipment:
- For new tunbuckles or turnbuckles which have never been installed, no action is required.
- For turnbuckles which have already been installed, comply with paragraphs 3.A. and 3.B.2.a. before
installation or no later than within 12 months from receipt of this ALERT SERVICE BULLETIN Revision 0,
issued on the date mentioned in the page footer.
Then, interpret the results in the same manner as for installed equipment.
1.F. APPROVAL
Approval of modifications:
Not applicable.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on March 14, 2013 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of
civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on March 14, 2013 under the prerogatives of the recognition of design capability FRA21J-002-DGA for
French Government helicopters.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved
on June 05, 2013 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of
civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved
on June 05, 2013 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French
Government helicopters.
1.G. MANPOWER
Qualification:
For compliance with this ALERT SERVICE BULLETIN:
1 Mechanical Technician.
Time for the operations:
4 hours.
Estimated helicopter grounding time:
4 hours.
1.H. WEIGHT AND BALANCE
Not applicable.
1.I. EFFECT ON ELECTRICAL LOADS
Not applicable.
Revision 0  2013-03-14  Page 4/10
Revision 1 2013-06-05  This document is available on the internet: www.eurocopter.com/techpub

### Page 5 (OCR)

→ EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A031
1.J. SOFTWARE MODIFICATION EMBODIMENT RECORD
Not applicable.
1.K. REFERENCES
The following documents are required for compliance with this ALERT SERVICE BULLETIN:
Aircraft Maintenance Manual (MMA):
67-00-00-611  General Instructions
67-22-00-061  Control Cables Removal - Installation
Standard Practices Manual (MTC):
20.02.06.408  Safetying Turnbuckles
20.04.03.401  General Method for Reconditioning Corroded Metal Surfaces
20.04.04.403  Touch-up of protective treatment with Alodine 1200
20.04.05.402  Use of EPOXY primer P05 - P20 and P50
1.L. DOCUMENTS AFFECTED
CAUTION
THE USER OF THIS ALERT SERVICE BULLETIN
MUST ENSURE THAT ALL MAINTENANCE
DOCUMENTS  NECESSARY
MAINTENANCE OF THIS INSTALLATION IS
AVAILABLE.  OTHERWISE,  IT IS THE
RESPONSIBILITY OF THE USER TO OBTAIN
DOCUMENTS FROM THEIR USUAL EUROCOPTER
CONTACT.
Documents to be updated:
The technical information given in this ALERT SERVICE BULLETIN will be integrated into the following
manuals: MMA/MET.
Documents already updated:
Not applicable.
1.M. INTERCHANGEABILITY OR MIXABILITY OF PARTS
Not applicable.
Revision 0 2013-03-14  Page 5/10
Revision 1 2013-06-05  This document is available on the internet: www.eurocopter.com/techpub

### Page 6 (OCR)

— EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A031
2. MATERIAL INFORMATION
2.A. MATERIAL: PRICE - AVAILABILITY - PROCUREMENT
For any information concerning price of kits and/or components, contact the Customer Relations and Sales
Department of the EUROCOPTER network.
EUROCOPTER
Etablissement de Marignane
Direction Ventes et Relations Client (ECR)
13725 MARIGNANE CEDEX
FRANCE
NOTE 1
On the purchase order, please always specify the mode of
transport, the destination and the serial numbers of the aircraft
to be modified.
NOTE 2
For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F
Fax: +33 (0)4.42.85.99.96.
2.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT
Not applicable.
2.C. MATERIAL REQUIRED FOR EACH HELICOPTER/COMPONENT
Components to be ordered for one helicopter or one assembly:
New  Former
Key Word  Qty  P/N  Item  P/N  → Instruction
Turnbuckle  2*  330A27-5031-20  1
* Depending on the condition as specified in paragraph 3.B with a maximum quantity of 2 per helicopter.
Material to be ordered separately:
New  Former
Key Word  Qty  Item
P/N  PIN  →  Instruction
Locking Pin  651-91-4D54  2  Task 67-22-00-061
Lock Washer  4  330A27-5030-20  3  Task 67-22-00-061
Products to be ordered separately:
New  Former
Key Word  Qty  Item
P/N  P/N  →  Instruction
MASTINOX sealant  AIR  6856 K  4
2.D. MATERIAL TO BE RETURNED
Not applicable.
Revision 0  2013-03-14  Page 6/10
Revision 1  2013-06-05  This document is available on the internet: www.eurocopter.com/techpub

### Page 7 (OCR)

• EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A031
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
Comply with the General Instructions as per MMA Task 67-00-00-611.
3.B. OPERATIONAL PROCEDURE
3.B.1. Preliminary steps
Remove the 2 tail rotor control turnbuckles (a) as per Sub-Task 67-22-00-031-001 of MMA
Task 67-22-00-061 (Figure 1).
3.B.2. Procedure (Figure 1)
3.B.2.a. Visual check for corrosion or crack(s) on tappings and middle hole (internal surface of turnbuckles)
Using an inspection light source, perform a visual check of the tappings and middle hole of the
turnbuckles (a) for absence of corrosion or crack(s):
Areas affected by corrosion may be dirty or show bulges and are covered with powdery deposit or
whitish or reddish pits.
Interpret the results as per paragraph 1.E.2.
3.B.2.b. External surface check
3.B.2.b.1. Visual check for corrosion or crack(s) on external surface
Using an inspection light source, perform a visual check of the external surface of the turnbuckles (a) for
absence of corrosion or crack(s):
Areas affected by corrosion may be dirty or show bulges, the paint has usually faded and is covered with
powdery deposit or whitish or reddish pits.
Interpret the results as per paragraph 1.E.2.
3.B.2.b.2. Measurement of the corrosion depth
- For each turnbuckle, if there is corrosion:
• Sand the corroded surface until the corrosion is eliminated and apply the procedure defined in Work
Card 20.04.03.401 (MTC) General method for reconditioning corroded metal surfaces.
. Gauge the damaged depth.
- Interpret the results as per paragraph 1.E.2.
3.B.2.c. Corrosion treatment on external surface
Perform corrosion treatment as per Work Card:
20.04.03.401  General Method for Reconditioning Corroded Metal Surfaces
20.04.04.403  Touch-up of protective treatment with Alodine 1200
20.04.05.402  Use of EPOXY primer P05 - P20 and P50
3.B.2.d. Replacement of turnbuckle
Discard the damaged turnbuckles) (a).
Install the new turnbuckle(s) (1) as per Final steps paragraph 3.B.3.
Revision 0 2013-03-14  Page 7/10
Revision 1 2013-06-05  This document is available on the internet: www.eurocopter.com/techpub

### Page 8 (OCR)

* EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A031
3.B.3. Final steps
Visually check the general surface condition of the turnbuckle before installing it (scratches or damage to
the paint) and, if necessary, touch up as per paragraph 3.B.2.c.
CAUTION
MAKE SURE END-FITTINGS AND INTERIOR OF
THE  TURNBUCKLE  ARE COATED  WITH
MASTINOX SEALANT (4) BEFORE INSTALLATION
OF THE TURNBUCKLE.
Install the tail rotor control turnbuckles (a) or (1) as per Sub-Task 67-22-00-431-001 of MMA
Task 67-22-00-061 (Figure 1).
- Safety the turnbuckles as per MTC Work Card 20.02.06.408.
3.C. IDENTIFICATION
Identification of this document:
Record compliance with this document and the Revision number in the helicopter documents.
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Operating instructions:
Not applicable.
Maintenance instructions:
EUROCOPTER makes compliance with paragraph 3. of this ALERT SERVICE BULLETIN mandatory, at
intervals not exceeding 12 months.
Revision 0 2013-03-14  Page 8/10
Revision 1 2013-06-05  This document is available on the internet: www.eurocopter.com/techpub

### Page 9 (OCR)

→ EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A031
8 10178
1 9728_
9220
9000
8660
8481
7225_
6815
6405
(4)
(2)
(1) or (a).
(4)
(b)
Figure 1
Revision 0 2013-03-14  Page 9/10
Revision 1 2013-06-05  This document is available on the internet: www.eurocopter.com/techpub

### Page 10 (OCR)

→ EUROCOPTER
AN EADS COMPANY  ASB No. EC225-05A031
4.  APPENDIX
Check for absence of corrosion or
crack(s) on the turnbuckle tappings
and middle holes: Paragraph 3.B.2.a.
Presence of
NO  corrosion or crack(s) on the  YES
turnbuckle tappings or middle
holes?
Check for absence of corrosion or
crack(s) on the external surface of the  Replace the turnbuckle
before resuming flights:
turnbuckles: Paragraph 3.B.2.b.1.  Paragraph 3.B.2.d.
Presence of crack(s) on the  YES
external surface of the
turnbuckles?
NO
Check the depth of
NO  corrosion:
Presence of corrosion on the  YES  Paragraph 3.B.2.b.2.
external surface of the
turnbuckles?
NO  Depth  YES
> 0.3 mm ?
Reinstall the
turnbuckle:  - Carry out corrosion treatment:
Paragraph 3.B.3.  Paragraph 3.B.2.c.
- Reinstall the turnbuckle: Paragraph 3.B.3.
- Replace the turnbuckle within 6 months
Resume flights.
Periodic check at intervals not exceeding 12 months:
Comply with Paragraph 3.
Revision 0 2013-03-14  Page 10/10
Revision 1 2013-06-05  This document is available on the internet: www.eurocopter.com/techpub

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
