# Airbus Helicopters Alert Service Bulletin EC225-25A211

Copy: Revision 1 ("Airbus Helicopters ASB No_ EC225-25A211 Rev 1"), 13 pages: PDF https://openairdocs.org/files/sha256/69/81/6981841926d00ec165bbf394081f79807157702d4daef4a308e91f847bb7d55e; text https://openairdocs.org/service-documents/airbus-helicopters/ec225-25a211/file/6981841926d0.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0020; AD 2021-10-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC225-25A211
- Latest revision known: EC225-25A211, Revision 1, dated October 23, 2019 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec225-25a211

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2021-10-03](https://openairdocs.org/ad/2021-10-03.md), effective Jun 22, 2021: Revision 1

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus-helicopters/ec225-25a211/proposed.md).

## Text (13 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0020; AD 2021-10-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC225-25A211
Civil version: LP
ALERT SERVICE BULLETIN
CORRECTIVE MEASURE
EQUIPMENT AND FURNISHINGS - Life rafts in multipurpose sponsons
Replacement of LH and RH life raft release bellcranks
Corresponds to modification 0728457
For the attention of
Revision No.  Date of issue
Revision 0  2019-04-03
Revision 1  2019-10-23
Summary:
The purpose of this ALERT SERVICE BULLETIN is to improve the reliability of the percussion control for the LH
and RH life raft inflation cylinders.
Reason for last revision:
The purpose of revision 1 of this ALERT SERVICE BULLETIN is to extend effectivity by removing the prerequisite
modification (MOD 0725749) not applicable to EC225 LP version and to allow the control bellcrank spring to be
reused.
Compliance:
Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
Revision 0 2019-04-03  Page 1/13
Revision 1 2019-10-23  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC225-25A211
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
Helicopters fitted with the installation "emergency life rafts in the multipurpose sponsons"
PRE-MOD 0728457.
NOTE
Refer to the Individual Inspection Record (RIC AMS) to
identify the actual configuration of the helicopter.
1.A.2. Non-installed equipment or parts
- LH bellcranks, P/N 332A41-4396-20,
- RH be cranks, P/N 332A41-4396-21.
1.B. ASSOCIATED REQUIREMENTS
Not applicable
1.C. REASON
Airbus Helicopters has been informed that during the first application of the maintenance task of adjustment
and test of the emergency life rafts at the client's premises, the bellcranks of the raft inflation cylinders were
jammed due to galvanic corrosion, so that deployment was not possible.
In order to prevent this risk of getting jammed Airbus Helicopters has developed modification 0728457, which
involves replacing the existing bellcranks (Aluminum 2024 with Alodine treatment) with new bellcranks
(Anodized aluminum 717517351) fitted with a polyamide bush.
Compliance with this ALERT SERVICE BULLETIN cancels the instructions imposed by EMERGENCY
ALERT SERVICE BULLETINS EC225-05A048 and EC225-05A050.
The purpose of this ALERT SERVICE BULLETIN is to restore the reliability of the percussion control for the
LH and RH life raft inflation cylinders.
Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
Reason for revision 1
The purpose of revision 1 of this ALERT SERVICE BULLETIN is to extend effectivity by removing the
prerequisite modification (MOD 0725749) not applicable to EC225 LP version and to allow the control
bellcrank spring to be reused.
Revision 1 of this ALERT SERVICE BULLETIN does not affect compliance with revision O.
Revision 0 2019-04-03  Page 2/13
Revision 1 2019-10-23  This document is available on the internet: www.a  licopters.com/techpub/

### Page 3 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC225-25A211
1.D. DESCRIPTION
Modification 0728457 consists in:
- removing the cylinder holders from the multi-purpose sponsons,
- removing the support assemblies from the cylinder holders,
- on the existing pivot shafts of the support assemblies, replacing the bellcranks with new levers fitted with a
polyamide bush,
- installing the support assemblies,
- installing the cylinder holders.
Addition of material to
the new bellcrank to
enable  the  bush
Support assembly  installation  Pivot shaft
Bush
Front view of LH cylinder holder  New bellcrank
Cross-section
of bellcrank
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Airbus Helicopters makes compliance with the instructions given in paragraph 3. of this ALERT SERVICE
BULLETIN mandatory before delivery of the helicopter.
1.E.2. Compliance in service
The work on the helicopter and on non-installed equipment or parts must be performed by the operator.
Helicopters/ installed equipment or parts:
Comply with paragraph 3., within 6 months following receipt of this ALERT SERVICE BULLETIN revision 1
issued on the date indicated at the bottom of the page.
Non-installed equipment or parts:
After compliance with this ALERT SERVICE BULLETIN, scrap the stock of bellcranks specified in
paragraph 1.A.2.
Building-up stocks of spare parts related to compliance with this ALERT SERVICE BULLETIN is left to the
operator's initiative.
Revision 0 2019-04-03  Page 3/13
Revision 1 2019-10-23  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC225-25A211
1.F. APPROVAL
Approval of modifications:
The information or instructions relate to modification 0728457, which was approved on July 19, 2019
by EASA for civil version helicopters subject to an Airworthiness Certificate.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on January 30, 2019 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on January 30, 2019 under the prerogatives of the recognition of design capability FRA21J-002-DGA for
French Government helicopters.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved
on October 22, 2019 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved
on October 22, 2019 under the prerogatives of the recognition of design capability FRA21J-002-DGA for
French Government helicopters.
1.G. MANPOWER
For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the use of personnel
with the following qualifications:
Qualification:
- 1 Mechanical Engineering Technician.
The times for the operations is given for reference purposes, for a standard configuration.
Time for the operations:
- approximately 1 day for each side for 1 Mechanical Engineering Technician.
The estimated helicopter downtime is 2 days for having the LH and RH bellcranks replaced by 1 Mechanical
Engineering Technician.
1.H. WEIGHT AND BALANCE
Negligible.
1.I.  POWER CONSUMPTION
Not applicable
Revision 0 2019-04-03  Page 4/13
Revision 1 2019-10-23  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC225-25A211
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable
1.K. REFERENCES
The following documents are necessary for compliance with this ALERT SERVICE BULLETIN
- MMA: 25-66-01-021: Removal of Life Raft POST MOD 0726590.
- MMA: 25-66-01-061: Emergency Life Raft in Multipurpose Sponson.
- MMA: 25-66-01-421: Installation of Life Raft POST MOD 0726590.
- MMA: 25-66-01-821: Adjustment - Ground Test of Life Raft Inflation Control POST MOD 0726590.
- MTC: 20.02.05.404:  Joining by bolts and nuts.
- MTC: 20.02.06.404:  Safetying with cotter pins.
- MTC: 20.04.01.102:  Use of cleaning products on individual parts and on aircraft.
- MTC: 20.07.01.201:  Handling of helicopters in a hangar and in a prepared area.
- MTC: 20.07.02.201:  Helicopter parked in a repair shop.
- MTC: 20.07.03.408:  Appearance checks on an aircraft after an inspection or repair.
1.L. OTHER AFFECTED PUBLICATIONS
The modification shall be incorporated into:
- Index of modifications (SIM),
- Illustrated Parts Catalog (IPC),
- Aircraft Maintenance Manual (MMA).
Updates to these documents will be distributed later.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Interchangeability:
PRE MOD and POST MOD bellcranks are not interchangeable.
Mixability:
It is prohibited to mix PRE MOD and POST MOD parts: full embodiment of modification 0728457 is
mandatory (RH AND LH sides).
Revision 0 2019-04-03  Page 5/13
Revision 1 2019-10-23  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC225-25A211
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
The Airbus Helicopters Super Puma Program Department will inform customers of the availability times of
kits or components.
Airbus Helicopters
Etablissement de Marignane
Direction Ventes et Relations Client
13725 MARIGNANE CEDEX
France
NOTE 1
On the purchase order, please specify the mode of
transport, the destination and the serial numbers of the
helicopters to be modified.
NOTE 2
Order ALERT SERVICE BULLETINS via:
Telex: HELICOP 410 969F
Fax: +33 (0)4.42.85.99.96.
2.B. LOGISTIC INFORMATION
Not applicable.
Revision 0 2019-04-03  Page 6/13
Revision 1 2019-10-23  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 7 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC225-25A211
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Kit to be ordered for one helicopter:
Former
Description  Qty  New P/N  Item
PIN  Instruction
Life raft release
bushed lever kit  332A72-8457-0071
comprising:
LH bellcrank  332A41-4396-22  332A41-4396-20  Scrap
RH bellcrank  1  332A41-4396-23  332A41-4396-21  Scrap
Bush  2  332A41-4397-20
Cotter pin  6  MS24665-151
Plain pin  4  22719BC050012L
Washer  4  23111CA050
Spring  2  332A41-4445-20  See NOTA 3
Hex head screw  22201BC060024L
Flat washer  23116AG060LE  9
Flat washer  23111AG060LE  10
Castellated hex nut  22453BC060L  11
Rivet washer  2  ASNA011340ADL  12
Plain pin  2  22719BC040015L  13
NOTE 3
The springs (7) must be stored because they are not used in
this ALERT SERVICE BULLETIN.
Consumables to be ordered separately:
In accordance with the Work Cards and Tasks specified in this ALERT SERVICE BULLETIN.
The consumables can be ordered separately from the following companies:
Aviatec global aviation  Gaches chimie
Website: www.aviatec.net
Telephone: +33 1.34.46.45.24 or +49 4193 8803 630
Fax: +33 1.34.46.45.26 or +49 4193 8803 699
AOG: +49 4193 8803 660
AOG email: aog@aviatec.aero
Website: www.gaches.com
Telephone: +33 5 61 31 64 45
Fax: +33 5.61.40.98.63
AOG email: marketplace@gaches.com
BDSI
Website: https://www.boeingdistribution.com
Telephone: +1.305.925.2600
Fax: +1.305.507.7191
AOG: +1.305.471.8888
AOG email: AOGdesk@Boeingdistribution.com
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision 0 2019-04-03  Page 7/13
Revision 1 2019-10-23  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 8 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC225-25A211
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- Read and comply with the instructions for handling helicopters in a repair workshop as per Work
Card 20.07.01.201 (MTC).
- Read and comply with the instructions for parking helicopters in a repair workshop as per Work
Card 20.07.02.201 (MTC).
- Unless otherwise indicated, comply with the instructions for joining by bolts and nuts as per Work
Card 20.02.05.404 (MTC).
3.B. WORK STEPS
NOTE 1
Only the procedure for installing LH bellcrank (1) is
described; install the RH bellcrank (2) by performing the
same work steps.
3.B.1. Preliminary steps
- Install appropriate access means.
CAUTION
BEFORE ANY WORK ON THE SYSTEM, MAKE
SURE THAT THE CYLINDER SAFETY PINS ARE IN
POSITION.
Depending on configuration:
- Remove:
. the cover in accordance with Sub-task 25-66-01-031-001 of Task 25-66-01-061 (MMA),
. the cylinder in accordance with Sub-task 25-66-01-031-002 of Task 25-66-01-061 (MMA),
. the survival kit in accordance with Sub-task 25-66-01-031-003 of Task 25-66-01-061 (MMA),
. the raft in accordance with Sub-task 25-66-01-031-004 of Task 25-66-01-061 (MMA),
Or
- Remove the life raft assembly POST MOD 0726590 in accordance with Task 25-66-01-021 (MMA).
Revision 0 2019-04-03  Page 8/13
Revision 1 2019-10-23  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 9 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC225-25A211
3.B.2. Procedure
3.B.2.a. Removing the bellcrank (Figure 1)
CAUTION
BEFORE REMOVING THE COTTER PINS, MAKE
THAT THE  AREA IS PROPERLY
PROTECTED TO PREVENT DROPPING  THE
WASHERS AND PINS INTO THE SPONSON OF THE
LIFE RAFT.
- Remove and scrap cotter pin (a), pin (b), and washer (c).
- Remove and scrap cotter pin (a), pin (d), and washer (e).
NOTE 2
When removing rod (f) take care not to alter the setting.
- Remove and retain rod (f).
- Remove and retain spring (g).
- Remove and scrap cotter pin (a), castellated nut (h), washer (k), screw (l) and washer (m).
- Remove and scrap bel crank (n).
- Clean the pivot shaft of support assembly (p) in accordance with Work Card 20.04.01.102 (MTC).
3.B.2.b.  Installing the bush and be crank (Figure 2)
- Install bush (3) and bellcrank (1) ((2) for RH side) on the shaft of support assembly (p) using screw (8),
washers (9) and (10) and castellated nut (11) (Cross-section C-C).
- Tighten nut (11) to standard torque.
CAUTION
TO LOCK NUT (11) USING COTTER PIN (4), DRILL
A 2 MM DIA. HOLE IN SCREW (8) (SEE PHOTO
BELOW).
11
Ø 2 mm (.079 in.)
- Lock nut (11) using cotter pin (4) in accordance with Work Card 20.02.06.404 (MTC).
- Install spring (g).
- Position rod (f), washer (6), pin (5) and cotter pin (4).
- Install cable (q) using washer (12), pin (13) and cotter pin (4) (Detail B).
Revision 0 2019-04-03  Page 9/13
Revision 1 2019-10-23  This document is available on the internet: www.airbu  ushelicopters.com/techpub

### Page 10 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC225-25A211
3.B.3. Final steps
CAUTION
MAKE SURE THAT THE CYLINDER SAFETY PINS
ARE IN POSITION BEFORE STARTING ANY WORK
ON THE SYSTEM.
Depending on configuration:
- Install:
. the raft in accordance with Sub-task 25-66-01-421-001 of Task 25-66-01-421 (MMA),
. the cylinder in accordance with Sub-task 25-66-01-421-002 of Task 25-66-01-421 (MMA),
. the survival kit in accordance with Sub-task 25-66-01-421-003 of Task 25-66-01-421 (MMA),
. the cable in accordance with Sub-task 25-66-01-421-004 of Task 25-66-01-421 (MMA),
Or
- Install the life raft assembly POST MOD 0726590 in accordance with Task 25-66-01-421 (MMA).
- Remove the access equipment.
- Check the appearance of the work area in accordance with Work Card 20.07.03.408 (MTC).
3.B.4. Tests
- Carry out the adjustments and ground tests for the life raft percussion control as per Task 25-66-01-821
(MMA)
- Install the cover in accordance with Sub-task 25-66-01-421-005 of Task 25-66-01-421 (MMA).
3.C. COMPLIANCE CONFIRMATION
Compliance with this document:
Record compliance with this document, with the revision number, in the helicopter documentation.
Tracking of modifications in the documentation:
Record the embodiment of modification 0728457 in the helicopter documentation.
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Revision 0 2019-04-03  Page 10/13
Revision 1 2019-10-23  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 11 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC225-25A211
PRE MOD
FRONT VIEW
DETAIL B
CDı
CROSS-SECTION
c-c
Figure 1
Revision 0  2019-04-03  Page 11/13
Revision 1  2019-10-23  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 12 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC225-25A211
PAGE LEFT BLANK INTENTIONALLY
Revision 0 2019-04-03  Page 12/13
Revision 1  2019-10-23  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 13 (OCR)

AIRBUS
HELICOPTERS  ASB No. EC225-25A211
POST MOD
FRONT VIEW
DETAIL B
1 LH
2 RH
CROSS-SECTION
c-c
2 RH
10
p-
Figure 2
Revision 0 2019-04-03  Page 13/13
Revision 1  2019-10-23  This document is available on the internet: www.airbushelicopters.com/techpub

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
