# Airbus Helicopters Alert Service Bulletin EC225-33A018

Copy: No revision named ("Airbus ASB EC225-33A018 Rev 0"), 36 pages: PDF https://openairdocs.org/files/sha256/72/43/7243b058985af6208e383639d532ef047af57856f0347fa6937ca7550a18061c; text https://openairdocs.org/service-documents/airbus-helicopters/ec225-33a018/file/7243b058985a.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2024-2663, the docket of AD 2025-10-02. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC225-33A018
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec225-33a018

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2025-10-02](https://openairdocs.org/ad/2025-10-02.md), effective Jul 8, 2025: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus-helicopters/ec225-33a018/proposed.md).

## Text (36 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2024-2663, the docket of AD 2025-10-02. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
Civil version(s): LP
ALERT SERVICE BULLETIN
CORRECTIVE MEASURE
LIGHT - LANDING LIGHT
Metallisation landing search light
Corresponds to modification MC29201
For the attention of
Revision No.  Date of issue
Revision 0  2022-12-15
Summary:
The purpose of this ALERT SERVICE BULLETIN is to install an electrical bonding braid on the search lights under
sponson.
Compliance:
It is mandatory to comply with this ALERT SERVICE BULLETIN.
Helicopters : 2725, 2739, 2744, 2750, 2781, 2786, 2854, 2883, 2885, 2892, 2901, 2910, 2914, 2918, 2921,
2922, 2924, 2930, 2986, 2987, 2994, 3001, 3005, 3006, 3009, 3011, 3014, 3015, 3018, 3021 and
3029
Revision 0 2022-12-15  Page 1/36

### Page 2 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
1. PLANNING INFORMATION
CAUTION
MAKE  SURE  THAT THE  MODIFICATIONS
RELATED TO THIS ALERT SERVICE BULLETIN
AGREE WITH THE HELICOPTER CONFIGURATION
AT THIS TIME. IF THE MODIFICATIONS DO NOT
AGREE WITH THE HELICOPTER CONFIGURATION:
- PREPARE THE NECESSARY ADAPTATION
WORK.
- GET THE APPROVAL BY THE APPLICABLE
LOCAL AIR TRANSPORT AUTHORITIES.
- COMPLY WITH THE AIRWORTHINESS
REQUIREMENTS.
THIS ALERT SERVICE BULLETIN IS WRITTEN FOR
THE INITIAL HELICOPTER CONFIGURATION
SPECIFIED IN THE INDIVIDUAL INSPECTION LOG
BOOK. IT INCLUDES ONLY THE POST-DELIVERY
CONFIGURATION CHANGES WHICH ARE KNOWN
AND APPROVED BY AIRBUS HELICOPTERS.
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
Helicopters with a serial number identified on page 1, equipped with the light
MP/N 4307405 (704A46820034) and PRE MOD MC29201.
NOTA 1
The applicable configurations are defined in Appendix 4.
Refer to the serial numbers.
NOTA 2
Refer to the Individual Inspection Logbook (RIC AMS) to
identify the modification status of the helicopter.
1.A.2. Non-installed equipment or parts
Plug Mounting MP/N 332P64-2648-23
Plate MP/N 332P64-2648-24
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
Revision 0 2022-12-15  Page 2/36

### Page 3 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
1.C. REASON
In the framework of a new development project, design office department has identified absence of bonding
braids of the additional and optional search light installed on some helicopters (optional equipment).
The location of the additional and optional search light under the sponsons constitutes a possible area of
attachment of the lightning. If lightning strikes the search light, this lightning shall be evacuated on the aircraft
structure.
However, the additional and optional search light is completely isolated from the metallic structure, because
sponsons are made of composite material (non-metallic structure). The electrical shielding (when present)
will not be sufficient to drain the current.
High current could circulate into the helicopter electrical network and damage some equipment and/or
structure, but also electrical generation system.
The purpose of this ALERT SERVICE BULLETIN is to install an electrical bonding braid on the search lights
under sponson.
1.D. DESCRIPTION
The function of this ALERT SERVICE BULLETIN is to:
- Modify of the "747VC" connectors
- Modify the structure
- Install the electrical bonding braid
- Modify the harness on the landing search lights under sponson.
POST MOD
New metallic braids
Revision 0 2022-12-15  Page 3/36

### Page 4 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Helicopters/installed equipment or parts:
Airbus Helicopters makes it mandatory to comply with the instructions of paragraph 3.B. of this
ALERT SERVICE BULLETIN before the delivery of the helicopter (or the equipment).
Non-installed equipment or parts:
Not applicable.
1.E.2. Compliance in service
Helicopters/installed equipment or parts:
It is the operator who does the work on the helicopter.
Paragraphs  CONFIGURATION 1  CONFIGURATION 2
3.B.2.a.
3.B.2.b.1.
3.B.2.b.2
3.B.2.c.1.
3.B.2. c.2.
3.B.2.d.
Comply with paragraph 3.B. not more than 1320 flight hours or 24 months and 73 days (the first limit you get
to is applicable) after you received this ALERT SERVICE BULLETIN. Refer to the issue date on the page
footer.
Non-installed equipment or parts:
It is the operator who makes the decision on the level of stock related to the compliance with this
ALERT SERVICE BULLETIN. Refer to paragraph 3.B.5.
1.F. APPROVAL
Approval of modifications:
The information or instructions relate to modification SPMC.29201 approved on June 16, 2022 under the
authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an
Airworthiness Certificate.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision O was approved on
November 23, 2022 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
Revision 0 2022-12-15  Page 4/36

### Page 5 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
1.G. MANPOWER
* Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have these
qualifications:
Qualifications:
- 1 Airframe Technician
- 1 Electrical Technician.
The man-hours are an estimate given for information only and for a standard helicopter configuration.
Estimated Man-hours:
- 8 hours for Airframe Technician
- 6 hours for Electrical Technician.
The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.
The estimate of the helicopter downtime is 2 days.
1.H. WEIGHT AND BALANCE
There is no change in weight and moment.
1.I. POWER CONSUMPTION
Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K. REFERENCES
These documents are necessary to comply with this ALERT SERVICE BULLETIN:
Aircraft Maintenance Manual (MMA):
MMA: 24-00-00-611: General Instruction - GENERAL
MMA: 33-43-08-061: Removal - Installation - SWIVEL LIGHTS UNDERNEATH MULTIPURPOSE
SPONSONS
MMA: 33-43-08-721: Functional Tests - SWIVEL LIGHTS UNDERNEATH MULTIPURPOSE SPONSONS
MMA: 53-00-00-611: General Standard Maintenance - GENERAL
Standard Practices Manual (MTC):
MTC: 20-01-01-310: Use of sealing compounds - Miscellaneous products used on helicopters
MTC: 20-02-05-404: Assembly by screws and nuts - joining
MTC: 20-02-05-601: Checking self-locking nuts and screw - joining
MTC: 20-02-06-409: Safetying with Loctite compound - Safetying and locking assemblies
MTC: 20-02-07-101: Electrical bonding: General - Electrical bonding
MTC: 20-02-07-401: Electrical bonding procedure - Electrical bonding
MTC: 20-02-07-405: Use of CHO-BOND 1038 - Electrical bonding
MTC: 20-06-01-420: Application of BETAMATE 7120 - Bonding with adhesives
MTC: 20-06-04-305: Application of mixtures No. 16 and 17 - Use of bonding mixture
MTC: 20-07-02-201: Helicopter parked in a repair shop - Safety instruction
Revision 0 2022-12-15  Page 5/36

### Page 6 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions
MTC: 20-08-05-103: Monitoring of parts in operation - marking service life customization - General rules
applicable to aircraft.
MTC: 20-80-20-101: Contact Insertion and Extraction Method and Tools - Standard Practices -
Electrical Power
MTC: 20-80-20-402: Installation / Removal of Cable Ties - Standard Practices - Electrical Power
MTC: 20-80-20-407: Tools and Processes for Stripping Cables - Standard Practices - Electrical Power
MTC: 20-80-20-408: Method for crimping of electrical contacts for a connector - Standard Practices -
MTC: 20-80-20-422: Methods for Finishing the Back of Connectors or Bulkhead Feed-through Connectors -
MTC: 20-80-20-425: Tools and Settings Associated with the Crimping of Contacts - Standard Practices -
MTC: 20-80-20-449: Protection of electrical wiring during maintenance operations - Standard Practice -
MTC: 20-80-20-603: Securing Rules for Electrical Harnesses - Standard Practices - Electrical Power
MTC: 20-80-20-604: Inspection of the crimping of contacts - Standard Practices - Electrical Power
MTC: 20-80-20-605: Application and Check of Tightening Torques on electrical connections -
Information Notice (IN):
IN: 3481-1-00: The Marketplace: an Airbusworld Ordering service
IN: 3785-1-00: Introduction of the digital Service Bulletin reporting SB Insight
1.L. OTHER AFFECTED PUBLICATIONS
CAUTION
TO  COMPLY  WITH  THIS
ALERT SERVICE BULLETIN, THE OPERATOR
MUST MAKE SURE THAT ALL THE MAINTENANCE
DOCUMENTS  NECESSARY  FOR  • THE
MAINTENANCE OF THIS INSTALLATION ARE
AVAILABLE. IF THEY ARE NOT AVAILABLE,
THE  OPERATOR  MUST  CONTACT
AIRBUS  HELICOPTERS TO GET  THESE
DOCUMENTS.
The manual shown below is updated with the modification:
Aircraft Maintenance Manual (AMM).
Airbus Helicopters will update the documents shown below when the customer orders it:
- Illustrated Parts Catalog (IPC)
- Wiring Diagram Manual (WDM).
You will receive the documents to which you subscribe.
The ALERT SERVICE BULLETIN content for parts catalog information and wiring diagram information has to
be considered as Instructions for Continued Airworthiness (ICA).
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Not applicable.
Revision 0 2022-12-15  Page 6/36

### Page 7 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Price
For information about the price of the modification kits and/or components, or for aid, contact the
Airbus Helicopters Network Sales and Customer Relations Department.
The Airbus Helicopters Program Department will do the tasks and/or supply the components free of charge.
Availability
Contact the Sales and Customer Relations Department to know the delivery lead times.
Procurement
Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations
Department:
Airbus Helicopters
Etablissement de Marignane
Direction Ventes et Relations Client
13725 MARIGNANE CEDEX
FRANCE
In the purchase order, write the information that follows:
- The mode of transport
- The destination
- The serial numbers of the helicopters to change.
2.B. LOGISTIC INFORMATION
Not applicable.
Revision 0 2022-12-15  Page 7/36

### Page 8 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Kits to be ordered for one helicopter or one assembly:
Former
Key Word  Qty  New P/N  Item  Instruction
P/N→
Retrofit head light equipped  332MC2-9201-0071
kit (including)
Support  6  ECS0792A012A  1
Bolt  2  22125BC050028L  4
Washer  23111AG050LE  5
Nut  4  ASN52320BH050N  6
Bolt  2  22125BC050014L  7
Bonding braid  2  332A55-2046-01  9
Lug (round not insul)  2  NSA936507TG0808  10
Connector  2  EN3645JOCN26BN  14
(Straight) cable outlet  2  EN3660-017A2C11  15
Cable outlet  2  EN3660-017A2C13  16
Contact  12  EN3155-009F2222  17
Contact  4  EN3155-009F1212  18
(Heat) shrinkable sleev  4  E0718-02-30  19
Connector  2  EN3645JOBN35BN  20
Plug (hi-tak seal T.12)  2  332A61-6454-22  21
Plug (hi-tak seal T.14)  2  332A61-6454-23  22
Harness LH light  332P60-1729-22AA  23
Harness RH light  332P60-1730-22AA  24
Harness RH (light 58LM2)  332A60-2991-22AA  25
Harness LH (light 58LM1)  1  332A60-2990-22AA  26
Screw  16  22272BC030012L  27
Back plate  2  DHS737-112.03  28
Back plate  2  DHS737-112.04  29
Revision 0  2022-12-15  Page 8/36

### Page 9 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
Equipment or parts to be ordered separately:
CONFIGURATION 1
Former
Key Word  Qty  New P/N  Item  Instruction
P/N—→
Bonding braid  993109-204-5  2
Bonding braid  1  993109-255-5  3
Set of labels  332P08-4290-0099  8
Heat-Shrink Tubing  1 m  VG95343T05E003A  11
Screw  2  22201BC060008L  12  See NOTA 1
Set of labels  332A64-3191-0099  30
NOTA 1
The screws (12) are ordered following the depth of
penetration in the insert. Refer to paragraph 3.B.2.c.
CONFIGURATION 2
Key Word  Qty  New P/N  Item  Former  P/N—  Instruction
Set of labels  1  332P08-4290-0099  8
Heat-Shrink Tubing  1 m  VG95343T05E003A  11
Screw  2  22201BC060008L  12  See NOTA 2
Braid bonding  2  993109-305-5  13
Set of labels  1  332A64-3191-0099  30
NOTA 2
The screws (12) are ordered following the depth of
penetration in the insert. Refer to paragraph 3.B.2.c.
Revision 0 2022-12-15  Page 9/36

### Page 10 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
Consumables to be ordered separately:
Refer to Tasks and Work Cards mentioned in this ALERT SERVICE BULLETIN and the list below:
CONFIGURATION 1
Consumable
Key word  Qty  CM  Item
_P/N
Primer  1L  ECS0091-1126  6081  32
Sealing compound  1L  ECS0091-1178  6077  33
Conductive sealant  1 Kg  ECS2129.10  6073  34
Micro-Balloon Powder  1 Kg  BJO-0930  7931  35
Adhesive past  1 L  ECS0044-1032  616  36
CONFIGURATION 2
Key word  Qty  Consumable  _P/N  Item
Primer  1L  ECS0091-1126  6081  32
Sealing compound  1L  ECS0091-1178  6077  33
Conductive sealant  1 Kg  ECS2129.10  6073  34
You can send an order for the consumables from the AirbusWorld Marketplace through e-ordering
(IN 3481-1-00).
If you cannot get access to e-ordering, please contact your Logistic Focal Point.
Special tools:
Refer to Tasks and Work Cards mentioned in this ALERT SERVICE BULLETIN.
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision 0 2022-12-15  Page 10/36

### Page 11 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- Comply with the general instruction. Refer to Task 24-00-00-611 (MMA).
- Comply with the general standard instruction. Refer to Task 53-00-00-611 (MMA).
- Comply with the instruction of sealing compound. Refer to Work Card 20-01-01-310 (MTC).
- Comply with the instruction of assembly by screws and nuts. Refer to Work Card 20-02-05-404 (MTC).
- Comply with the instruction for checking self-locking nuts and screw. Refer to
Work Card 20-02-05-601 (MTC).
- Comply with the instruction of safetying with Loctite compound. Refer to Work Card 20-02-06-409 (MTC).
- Comply with the instruction for electrical bonding: General. Refer to Work Card 20-02-07-101 (MTC).
- Comply with the instruction for electrical bonding procedure. Refer to Work Card 20-02-07-401 (MTC).
- Comply with the instruction of CHO-BOND 1038. Refer to Work Card 20-02-07-405 (MTC).
- Comply with the instruction on application of BETAMATE 7120. Refer to Work Card 20-06-01-420 (MTC).
- Comply with the instruction on application of mixtures No. 16 and 17. Refer to
Work Card 20-06-04-305 (MTC).
- Comply with the instruction for contact Insertion and Extraction Method and Tools. Refer to
Work Card 20-80-20-101 (MTC).
- Comply with the instruction on installation / Removal of Cable Ties - Standard Practices. Refer to
Work Card 20-80-20-402 (MTC).
- Comply with the instruction for Tools and Processes for Stripping Cables. Refer to
Work Card 20-80-20-407 (MTC).
- Comply with the instruction for method for crimping of electrical contacts for a connector. Refer to
Work Card 20-80-20-408 (MTC).
- Comply with the instruction for the methods for Finishing the Back of Connectors or Bulkhead
Feed through Connectors. Refer to Work Card 20-80-20-422 (MTC).
- Comply with the instruction for Tools and Settings Associated with the Crimping of Contacts. Refer to
Work Card 20-80-20-425 (MTC).
- Comply with the instruction for securing Rules for Electrical Harnesses. Refer to
Work Card 20-80-20-603 (MTC).
- Comply with the instruction for inspection of the crimping of contacts. Refer to
Work Card 20-80-20-604 (MTC).
- Comply with the instruction on application and Check of Tightening Torques on electrical connections.
Refer to Work Card 20-80-20-605 (MTC).
3.B. WORK STEPS
CAUTION
MAKE SURE THAT YOU PREVENT ALL POSSIBLE
FOREIGN OBJECT DEBRIS (FOD).
3.B.1. Preliminary steps
- Park the helicopter in a maintenance hangar. Refer to Work Card 20-07-02-201 (MTC).
- Install appropriate access equipment.
- Remove and/or open all applicable cowlings, panels, doors and other items of equipment to get access to
the different work areas.
- Disconnect all the electrical power supplies.
- Protect the electrical wiring in the work area. Refer to the Work Card 20-80-20-449 (MTC).
Revision 0 2022-12-15  Page 11/36

### Page 12 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
3.B.2. Procedure
3.B.2.a. Modification of the "747VC" connectors (Figure 1, Figure 2 and Figure 3)
- Remove and discard the RH harness (e) and the LH harness (f). Refer to Task 33-43-08-061 (MMA)
(Figure 3 - Details A and B).
- Remove and discard (Figure 1):
• The labels (a)
. The back plates (b) and (d)
. The hardwares (c).
- Install (Figure 2):
• The plugs (21) and (22)
. The plates (28) and (29)
. The screw (27)
. The harnesses LH light (23) and RH light (24) (Figure 3).
- Do the electrical bonding.
- Bond the label "747VC1", "747VC2", "747VC3" and "747VC4" of the set of labels (30).
- Install the LH harness (26) and the RH harness (25) (Figure 3).
3.B.2.b. Modification of the structure (Figure 4 and Figure 5)
3.B.2.b.1. Modification of the structure (Figure 4 and Figure 5) (CONFIGURATION 1)
- Remove and keep. Refer to Task 33-43-08-061 (MMA) (Figure 4):
• The plate (g)
. The shim (h)
. The light i)
• The plug mounting (k).
- Remove and discard the insert (m) (Figure 5 - SECTION A-A PRE MOD).
- On the plate (g) (Figure 4 - Detail B):
. Locate the hole (A) in accordance to the position.
. Drill the hole (A) to the diameter of 5.5 mm.
• Paint strip the hole (A) to a diameter of 10 mm on the both face.
• Identify again the plate (g). Refer to paragraph 3.C.
- Locate the holes (B) on (Figure 4 - Details B, C, D):
. The plate (g)
• The shim (h)
. The light (j).
- Paint strip the holes (B) to a diameter of 12 mm on the both face.
- On the plug mounting (k) (Figure 4 - Detail E):
• Remove the connectors (n).
Locate the hole (C).
. Fill the hole (C) with the powder (35) and adhesive (36) (Figure 5 - SECTION A-A POST MOD).
. Drill the hole (C) to a diameter of 5.5 mm.
• Paint strip the hole (C) to a diameter of 10 mm.
• Paint strip the plug mounting (k) on opposite face in accordance to the dimensions.
Identify again the plug mounting (k). Refer to paragraph 3.C.
Revision 0 2022-12-15  Page 12/36

### Page 13 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
3.B.2.b.2. Modification of the structure (Figure 4) (CONFIGURATION 2)
- Remove and keep. Refer to Task 33-43-08-061 (MMA):
• The plate (g)
. The shim (h)
• The light (i)
. The plug mounting (k).
- On the plate (g) (Detail B):
. Locate the hole (A) in accordance to the position.
. Drill the hole (A) to the diameter of 5.5 mm.
• Paint strip the hole (A) to a diameter of 10 mm on the both face.
. Identify again the plate (g). Refer to paragraph 3.C.
- Locate the holes (B) on (Details B, C, D):
• The plate (g)
• The shim (h)
. The light (i).
- Paint strip the holes (B) to a diameter of 12 mm on the both face.
- On the plug mounting (k) (Detail E):
• Remove the connector (n).
Locate the hole (C).
• Paint strip the hole (C) to a diameter of 10 mm.
• Paint strip the plug mounting (k) on opposite face in accordance to the dimensions.
• Identity again the plug mounting (k). Refer to paragraph 3.C.
3.B.2.c. Installation of the electrical bonding braid (Figure 4, Figure 6, Figure 7, Figure 8 and Figure 9)
3.B.2.c.1. Installation of the electrical bonding braid (Figure 4, Figure 6 and Figure 7) (CONFIGURATION 1)
- Install, Refer to the principle of Task 33-43-08-061 (MMA) (Figure 4 - Details B, C and D):
. The plate (g)
• The shim (h)
. The light (i)
. The plug mounting (k).
- Apply the sealant (34) (Figure 6 - Details A and B).
- Do the electrical bonding.
- Cut the braid (9) to a lengh of 700 mm and keep 1 lug (Figure 7 - Detail E).
- Install the lug (10) and the heat-shrink tubing (11) on the braid (9).
- Install the supports (1) in accordance with the dimension with (Figure 6 - Details C and D and
Figure 7 - Details A and B):
• The primer (32)
. The sealing compound (33).
- Install the braids (2), (3) and (9) with (Figure 6 - SECTION A-A and SECTION B-B; Figure 7 -
Details A, B, C and D):
. The bolts (4) and (7)
. The washers (5)
• The nuts (6)
. The existing screw (p) or (12).
NOTE 1
The screw (p) respect a depth of penetration in the insert of
6.5 mm minimum. If this condition is not respected, the
screw (12) is installed. The screw thread will not tight at the
end.
Revision 0 2022-12-15  Page 13/36

### Page 14 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
- Do the standard tightening torque and apply a reduction of 50% (Figure 6 - Detail C and D).
- Do the electrical bonding.
- Do the check of the electrical bonding of the search light.
- Bond the labels "741VN" and "742VN" of the set of labels (8) as close as possible from the equipment
(SECTION A-A and B-B).
3.B.2.c.2. Installation of the electrical bonding braid (Figure 4, Figure 8 and Figure 9) (CONFIGURATION 2)
- Install, Refer to the principle of Task 33-43-08-061 (MMA) (Figure 4 - Details B, C and D):
. The plate (g)
• The shim (h)
• The light (i)
. The plug mounting (k).
- Apply the sealant (34) (Figure 8 - Details A and B).
- Do the electrical bonding.
- Cut the braid (9) to a lengh of 800 mm and keep 1 lug (Figure 9 - Detail E).
- Install the lug (10) and the heat-shrink tubing (11) on the braid (9).
- Install the supports (1) in accordance with the dimension with (Figure 8 - Details C and D and
Figure 9 - Details A and B):
• The primer (32)
. The sealing compound (33).
- Install the braids (13) and (9) and with (Figure 8 - SECTION A-A and SECTION B-B; Figure 9 -
Details A, B, C and D):
• The bolts (4) and (7)
. The washers (5)
• The nuts (6)
• The existing screw (p) or (12).
NOTE 2
The screw (p) respect a depth of penetration in the insert of
6.5 mm minimum. If this condition is not respected, the
screw (12) is installed. The screw thread will not tight at the
end.
- Do the standard tightening torque and apply a reduction of 50% (Figure 8 - Detail C and D).
- Do the electrical bonding.
- Do the check of the electrical bonding of the search light.
- Bond the labels "741VN" and "742VN" of the set of labels (8) as close as possible from the equipment
(SECTION A-A and B-B).
3.B.2.d. Modification of the harnesses (Figure 10 and Figure 11)
- Modity the cable (q) with (Figure 10):
. The connectors (14)
. The cable outlet (16)
. The contacts (18)
. The shrinkable sleeve (19).
- Do a continuity test on the installed cables.
- Modify the cable (r) with (Figure 11):
. The connectors (20)
. The cable outlet (15)
. The contacts (17).
- Do a continuity test on the installed cables.
Revision 0 2022-12-15  Page 14/36

### Page 15 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
3.B.3. Tests
- Set the helicopter to flight condition.
- Energize the helicopter electrical power systems.
- Do the functional test of the swivel light underneath. Refer to the Work Card 33-43-08-721 (MMA).
3.B.4. Final steps
- Clean and restore the work areas and the helicopter. Refer to Work Card 20-07-03-408 (MTC).
- Install again and/or close all cowlings, panels, doors and equipment removed and/or opened during
preliminary steps (paragraph 3.B.1. of this ALERT SERVICE BULLETIN).
- Connect all the electrical power supplies.
- Clear the access means.
- Set the helicopter to flight condition.
3.B.5. Work steps for non-installed equipment or parts
Do the modifications of the plug mounting MP/N 332P64-2648-23 and plate MP/N 332P64-2648-24 identified
in paragraph 1.A.2. Refer to paragraphs 3.B.2.b. Give new identification. Refer to paragraph 3.C.
3.C. RECORD OF COMPLIANCE
Compliance with this document:
- Record the full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the
helicopter documents.
- Record compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):
QR-Code or hypertext link
NOTE 3
The  recording  compliance  with
ALERT SERVICE BULLETIN in the SB Insight tool does not
replace the recording in the helicopter documents.
ASB EC225-33A018
Tracking of modifications in the documentation:
Record full embodiment of modification MC29201 in the helicopter documents.
Revision 0 2022-12-15  Page 15/36

### Page 16 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
Identification of modifications on equipment or parts:
Identify the parts that follow refer to the table below and refer to Work Card 20-08-05-103 (MTC).
Key Word  Former MP/N  New P/N  MOD  Type of marking
332P64-2648-23
+
Plug Mounting  332P64-2648-23  MC29201  Ink
ALERT SERVICE BULLETIN
No. 33A018
332P64-2648-24
Plate  332P64-2648-24  MC29201  Ink
ALERT SERVICE BULLETIN
No. 33A018
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Operating instructions:
Not applicable.
Maintenance instructions:
Refer to Aircraft Maintenance Manual (MMA).
Revision 0 2022-12-15  Page 16/36

### Page 17 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
B
a
STRINGER DATUM
FWD
CABIN FLOOR DATUM
•
TR NEER
FWD
ZO
c
d
Back to paragraph 3.B.2.a.
Figure 1
Revision 0 2022-12-15  Page 17/36

### Page 18 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
FWD
747VC2  30
STRINGER REF
FWD
CABIN FLOOR DATUM
÷
30  747VC4  747VC1
X 6077  X 6405
STRINGER R
÷
29
30  747VC3
Back to paragraph 3.B.2.a.
Figure 2
Revision 0 2022-12-15  Page 18/36

### Page 19 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
LH SIDE SHOWN
RH SIDE SYMMETRICAL
26 LH
25 RH
† LH
e RH
RH24
LH 23
Back to paragraph 3.B.2.a.
Figure 3
Revision 0 2022-12-15  Page 19/36

### Page 20 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
PAGE LEFT BLANK INTENTIONALLY
Revision 0 2022-12-15  Page 20/36

### Page 21 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
LH SIDE SHOWN
RH SIDE SYMMETRICAL
LH SIDE  RH SIDE
CONFIGURATION 1  CONFIGURATION 1
A SEE FIGURE 5  SEE FIGURE 5 A
LH SIDE  RE SIDE
CONFIGURATION 2  c  CONFIGURATION 2
Back to paragraphs 3.B.2.b.1., 3.B.2.b.2., 3.B.2.c.1. and 3.B.2.c.2.
Figure 4
Revision 0 2022-12-15  Page 21/36

### Page 22 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
PAGE LEFT BLANK INTENTIONALLY
Revision 0 2022-12-15  Page 22/36

### Page 23 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
CONFIGURATION 1
SECTION
A-A
PRE MOD
SEE FIGURE 4
SECTION
v-V
POST MOD
SEE FIGURE 4
Ø 5.5
35
36
Back to paragraph 3.B.2.b.1.
Figure 5
Revision 0 2022-12-15  Page 23/36

### Page 24 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
PAGE LEFT BLANK INTENTIONALLY
Revision 0 2022-12-15  Page 24/36

### Page 25 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
CONFIGURATION 1
O LOCTITE
÷  CM 6073
M 6073
Y 1270  Y - 1270
FWD  <EWD
× 7725
SECTION
A-A
÷  × 7725  33  ÷
CM 6073  ÷ 32  [742VN
SECTION
B-B
Z -473
CM 6073  CM 6073  [741VN
CM 6073
Back to paragraph 3.B.2.c. 1.
Figure 6
Revision 0 2022-12-15  Page 25/36

### Page 26 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
PAGE LEFT BLANK INTENTIONALLY
Revision 0 2022-12-15  Page 26/36

### Page 27 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
CONFIGURATION 1
p or 12
32
33
D
=«
Back to paragraph 3.B.2.c. 1.
Figure 7
Revision 0 2022-12-15

### Page 28 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
PAGE LEFT BLANK INTENTIONALLY
Revision 0 2022-12-15  Page 28/36

### Page 29 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
CONFIGURATION 2
И 6073
sa
SECTION
A-A
:M 6073
742VN
÷  SECTION
B-B
Z-473
CM 6073  CM 6073  CM 6073  741VN
Back to paragraph 3.B.2.c.2.
Figure 8
Revision 0 2022-12-15  Page 29/36

### Page 30 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
PAGE LEFT BLANK INTENTIONALLY
Revision 0 2022-12-15  Page 30/36

### Page 31 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
CONFIGURATION 2
146 + 3mm
128 + 3mm
por 12
33
WD  FWD
D
19 + 3mm
p or 12
FWD
Back to paragraph 3.B.2.c.2.
Figure 9
Revision 0 2022-12-15  Page 31/36

### Page 32 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
PAGE LEFT BLANK INTENTIONALLY
Revision 0 2022-12-15  Page 32/36

### Page 33 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
PRE MOD  POST MOD
19
=
IVN  332VN SVU
5VU
- 2MO  - 2MO
| 685-  1685-
2MO  2MO
1686-  IPA DC ELECTRICAL MASTER UNIT  1686-  1PA DC ELECTRICAL MASTER UNIT
47VC  747VC4
282  33ZVN SVU
NOTE: UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRES
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE M2 GAUGE  IDENTIFICATION WITH ATA 3343
Back to paragraph 3.B.2.d.
Figure 10
Revision 0 2022-12-15  Page 33/36

### Page 34 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
PAGE LEFT BLANK INTENTIONALLY
Revision 0 2022-12-15  Page 34/36

### Page 35 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
PRE MOD
1 MO
747VC1  750VCA
281  870VU
6
5
747VC2  750VCB
282  880VU
750VU  JUNCTION BOX
252  5VU
20  POST MOD
17
15
1 MO
747VC1  750VCA
281  870VU
~
724
747VC2  15  750VCB
880VU  17  750VU  JUNCTION BOX
20  252  SVU
NOTE: UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRES
IDENTIFICATION WITH ATA 3343
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE DR24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2MO
Back to paragraph 3.B.2.d.
Figure 11
Revision 0 2022-12-15  Page 35/36

### Page 36 (OCR)

AIRBUS  HELICOPTERS
No. EC225-33A018
4. APPENDIX
2725  CONFIGURATION 1
2739  CONFIGURATION 1
2744  CONFIGURATION 1
2750  CONFIGURATION 1
2781  CONFIGURATION 1
2786  CONFIGURATION 1
2854  CONFIGURATION 2
2883  CONFIGURATION 2
2885  CONFIGURATION 2
2892  CONFIGURATION 2
2901  CONFIGURATION 2
2910  CONFIGURATION 2
2914  CONFIGURATION 2
2918  CONFIGURATION 2
2921  CONFIGURATION 2
2922  CONFIGURATION 2
2924  CONFIGURATION 2
2930
2986  CONFIGURATION 2
2987  CONFIGURATION 2
2994  CONFIGURATION 2
3001  CONFIGURATION 2
3005  CONFIGURATION 2
3006  CONFIGURATION 2
3009  CONFIGURATION 2
3011  CONFIGURATION 2
3014  CONFIGURATION 2
3015  CONFIGURATION 2
3018  CONFIGURATION 2
3021  CONFIGURATION 2
3029  CONFIGURATION 2
Revision 0 2022-12-15  Page 36/36

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
