# Airbus Helicopters Alert Service Bulletin EC225-62A016

Copy: Revision 1 ("Airbus Helicopters ASB EC225-62A016 Rev 1"), 13 pages: PDF https://openairdocs.org/files/sha256/a5/98/a5987c7cfc62b722e31078159ff8c5550372c80f5461639df9250954b6e5eba3; text https://openairdocs.org/service-documents/airbus-helicopters/ec225-62a016/file/a5987c7cfc62.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2024-1297, the docket of AD 2024-17-08. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: EC225-62A016
- Latest revision known: EC225-62A016, Revision 1, dated February 28, 2023 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/ec225-62a016

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2024-17-08](https://openairdocs.org/ad/2024-17-08.md), effective Nov 7, 2024: Revision 1

## Text (13 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2024-1297, the docket of AD 2024-17-08. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS  HELICOPTERS
No. EC225-62A016
Civil version(s): LP
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE
MAIN ROTOR - Main Rotor Mast
Inspection of the upper stop fixation screws and cover plate
For the attention of
Revision No.  Date of issue
Revision 0  2022-05-23
Revision 1  2023-02-28
Summary:
The purpose of this ALERT SERVICE BULLETIN is to make sure that:
- The screws of the Main Rotor Mast (MRM) upper stop are the correct ones.
- The MRM cover plate is flat.
- There is no water inside the Main Gear Box (MGB).
Reason for last Revision:
Since Revision O of this ALERT SERVICE BULLETIN, Airbus Helicopters internal process has been modified and
inspection process of MRM have been updated to make sure that both cover plate and upper stop screws
installation are correct.
This new process has been deployed in Airbus Helicopters on May, 23rd 2022
This date has been anticipated in the EASA AD No. 2022-0104 issued on June 9th 2022.
The purpose of Revision 1 is to align this ALERT SERVICE BULLETIN effectivity with the
EASA AD No. 2022-0104.
Therefore, helicopter EC225 version LP with a MRM all P/N manufactured or overhauled after May, 23rd 2022 are
not concerned by this ALERT SERVICE BULLETIN.
Compliance:
It is mandatory to comply with this ALERT SERVICE BULLETIN.
Revision 0 2022-05-23  Page 1/13
Revision 1 2023-02-28  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS  HELICOPTERS
No. EC225-62A016
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
Helicopters EC225 version LP fitted with a MRM all P/N manufactured or overhauled before May, 23rd 2022.
NOTE 1
Helicopters EC225 version LP with a MRM all P/N
manufactured or overhauled after May, 23rd 2022 are not
concerned by the compliance of this
ALERT SERVICE BULLETIN.
1.A.2. Non-installed equipment or parts
MRM all P/N manufactured or overhauled before May, 23rd 2022.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Revision 0:
Airbus Helicopters was informed of one case of significant presence of water in the MGB oil.
A detailed inspection of the MGB showed corrosion on the MRM and inside the MGB.
The origin of the water inside the MGB is the result of the deformation of the cover plate installed on the top
of the MRM.
It has also been discovered on another MRM, some upper stop screws damaged.
The degradation of the screws is due to a wrong screw reference installation.
The main difference being the length of the screw 30mm (1.181 in) instead of 36 mm (1.417 in).
Consequently, the purpose of this ALERT SERVICE BULLETIN is to make sure that:
- The screws of the MRM upper stop are the correct ones.
- The MRM cover plate is flat.
- There is no water inside the MGB.
Revision 0  2022-05-23  Page 2/13
Revision 1  2023-02-28  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS  HELICOPTERS
No. EC225-62A016
Revision 1:
Since Revision 0 of this ALERT SERVICE BULLETIN, Airbus Helicopters internal process has been modified
and inspection process of MRM have been updated to make sure that both cover plate and upper stop
screws installation are correct.
This new process has been deployed in Airbus Helicopters on May, 23rd 2022.
This date has been anticipated in the EASA AD No. 2022-0104 issued on June 9th 2022.
The purpose of Revision 1 is to align this ALERT SERVICE BULLETIN effectivity with the
EASA AD No. 2022-0104.
Therefore, Helicopters EC225 version LP with a MRM all PIN manufactured or overhauled after
May, 23rd 2022 are not concerned by this ALERT SERVICE BULLETIN.
Revision 1 has no effect on the application of the former revisions of this ALERT SERVICE BULLETIN.
1.D. DESCRIPTION
The ALERT SERVICE BULLETIN includes the work steps that follow:
- Make sure that the screws of the MRM upper stop are the correct ones.
- And depends of the helicopter configuration:
. Make sure that the MRM cover plate is flat.
. Get a sample of MGB oil.
. Analyze the results.
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Not applicable.
Revision 0  2022-05-23  Page 3/13
Revision 1  2023-02-28  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS  HELICOPTERS
No. EC225-62A016
1.E.2. Compliance in service
Helicopters/installed equipment or parts:
The operator must do the work on the helicopter.
Comply with paragraph 3. and Table No. 1 below:
Table No. 1
Time since the last drain of
the MGB or the last removal
Helicopter  of the cover plate, whatever  Action  Compliance time
configuration  comes first at receipt of  (the first limit you meet is applicable)
revision 0 of this
ALERT SERVICE BULLETIN
Not more than 55 flight hours or 1
Comply with  month after you received revision 0 of
All  Not applicable
paragraph 3.B.2.a.  this
ALERT SERVICE BULLETIN.
Not more than 55 flight hours or 1
Comply with  month after you received revision 0 of
paragraph 3.B.2.b.  this
ALERT SERVICE BULLETIN
More than 3 months
Comply with  3 months after you received revision 0  Not more than 110 flight hours or
- Without Main  paragraphs 3.B.2.c.  of this ALERT SERVICE BULLETIN
Rotor Hub (MRH)  and 3.B.2.d.
de-icing system  Or  Not more than 55 flight hours or 1  (See NOTE 1).
- With de-icing  blades anti  paragraph 3.B.2.b.  Comply with  months after you received revision 0 of  this
ALERT SERVICE BULLETIN.
optional - MRH
manifold  Not more than 110 flight hours or
(See NOTE 1).  3 months or less  3 months after you received revision 0
paragraphs 3.B.2.c.  Comply with  and 3.B.2.d.  3 months after the first compliance of  of this ALERT SERVICE BULLETIN  Repeat once, 110 flight hours or  Then,
the paragraph 3.B.2.d.
(See NOTE 2)
NOTE 2
Helicopters that do not have MRH de-icing system have a
Helicopters that have MRH de-icing system can deactivate it
and replace the MRH manifold by the cover place.
Revision 0  2022-05-23  Page 4/13
Revision 1  2023-02-28  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS  HELICOPTERS
No. EC225-62A016
NOTE 3
Waiting the results, the flights can continue but not more
compliance  as defined
the Table No. 1. It is recommended to anticipate the
compliance of paragraphs 3.B.2.c. and 3.B.2.d. to respect
the compliance time of this ALERT SERVICE BULLETIN.
Non-installed equipment or parts:
Before you install the MRM identified in paragraph 1.A.2. comply with paragraph 3.B.4.
1.F. APPROVAL
The technical content of this document is approved under the authority of the Design Organization Approval
ref. EASA. 21J.700.
The technical content of this document is approved under the prerogatives of the recognition of design
capability ref. FRA21J-002-DGA for French Government helicopters.
1.G. MANPOWER
• Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this
qualification:
Qualification: 1 Mechanical Technician
The man-hours are an estimate given for information only and for a standard helicopter configuration.
Estimated Man-hours: - 15 minutes to comply with paragraphs 3.B.2.a. and 3.B.2.b. (the time to replace the
screws and/or the cover plate is not included).
- 15 minutes to comply with paragraph 3.B.2.c. (the time to analyze the oil sample is
not included).
1.H. WEIGHT AND BALANCE
Not applicable.
1.I. POWER CONSUMPTION
Not applicable.
Revision 0  2022-05-23  Page 5/13
Revision 1  2023-02-28  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS  HELICOPTERS
No. EC225-62A016
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K. REFERENCES
Aircraft Maintenance Manual (MMA):
MMA: 30-60-00-051: Deactivation of the de-icing system - ROTOR DE ICER
MMA: 30-60-00-052: Activation of the de-icing system - ROTOR DE ICER
MMA: 60-00-00-641: Filling and Draining - ROTOR STANDARD PRACTICES
MMA: 62-20-00-021: Removal - Main rotor mast - MAIN ROTOR MAST ASSEMBLY
MMA: 62-20-00-421: Installation - Main rotor mast - MAIN ROTOR MAST ASSEMBLY
MMA: 62-21-00-062: Coning Stop Removal-Installation - MAIN ROTOR HUB
Standard Practices Manual (MTC):
MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power
generating systems - Technical instructions
MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions
MTC: 20-08-02-601: Spectrometric analysis of lubricating oils used in mechanical assemblies - Monitoring of
lubricating oils and hydraulic fluids
MTC: 20-08-05-101: Drafting and updating the log card (FM) - General rules applicable to aircraft
IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service
IN: 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight
1.L. OTHER AFFECTED PUBLICATIONS
Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Not applicable.
Revision 0  2022-05-23  Page 6/13
Revision 1  2023-02-28  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 7 (OCR)

AIRBUS  HELICOPTERS
No. EC225-62A016
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Price
For information about the price of the modification kits and/or components, or for aid, contact the
Airbus Helicopters Network Sales and Customer Relations Department.
Availability
Contact the Sales and Customer Relations Department to know the delivery lead time the operator's request.
Procurement
Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations
Department:
Airbus Helicopters
Etablissement de Marignane
Direction des Ventes et Relation Client
13725 MARIGNANE CEDEX
FRANCE
In the purchase order, write the information that follows:
- The mode of transport
- The destination
- The serial numbers of the helicopters to change.
2.B. LOGISTIC INFORMATION
Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Equipment or parts to be ordered separately:
Key Word  Qty  New P/N  Item
P/N  →  Instruction
Cover plate  1  332A31-3288-20  1  332A31-3288-20  Replace if
necessary
Screw  ALD  22232BC100036L  2  Replace if
necessary
Consumables to be ordered separately:
Refer to the Tasks and Work Cards given in this ALERT SERVICE BULLETIN.
You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN No. 3481-1-00).
If you cannot get access to e-ordering, please contact your Logistic Focal Point.
Revision 0  2022-05-23  Page 7/13
Revision 1  2023-02-28  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 8 (OCR)

AIRBUS  HELICOPTERS
No. EC225-62A016
Special tools:
Refer to the Tasks and Work Cards given in this ALERT SERVICE BULLETIN and the list that follows:
Key Word  Qty  Tool P/N or equivalent  Item
Rule  Commercial P/N  ZZ
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision 0  2022-05-23  Page 8/13
Revision 1  2023-02-28  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 9 (OCR)

AIRBUS  HELICOPTERS
No. EC225-62A016
3. ACCOMPLISHMENT INSTRUCTIONS
3.А. GENERAL
Not applicable.
3.B. WORK STEPS
3.B.1. Preliminary steps
- Disconnect all the electrical power supplies. Refer to Work Card 20-07-03-406 (MTC).
- Install the access equipment.
- Remove and/or open all applicable cowlings, panels, doors and other equipment items to get access to the
different work areas.
3.B.2. Procedure
3.B.2.a. Inspection of the screws of the MRM upper stop (Figure 4)
Make sure that "BC" is written on each head of the 10 screws (b) of the upper stop (c):
- If "BC" is written on the heads screws of the upper stop (c):
. No more action is necessary.
- If "BC" is not written on the heads screws of the upper stop (c):
. Replace one by one the related screws (b) of the upper stop (c) with the screw(s) (2).
Refer to the principle of the Task 62-21-00-062 (MMA).
3.B.2.b. Check of the flatness of the MRM cover plate
Make sure that the cover plate (a) is flat. Use the rule (zz) on two angles with an angle of 90 degrees
(Figure 1 and Figure 4, Detail A):
• ZZ
Figure 1
Revision 0  2022-05-23  Page 9/13
Revision 1  2023-02-28  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 10 (OCR)

AIRBUS  HELICOPTERS
No. EC225-62A016
- If the cover plate (a) is flat (you cannot see a space) between the rule (zz) and the
cover plate (a) (Figure 2):
_ ZZ
Figure 2
. Comply with paragraph with 3.B.3.
. Comply with 3.B.2.c. and 3.B.2.d. in the compliance time(s) showed with 1.E.2.
- If the cover plate is not flat (you can see a space) between the rule (zz) and the
cover plate (a) (Figure 3):
- a
Figure 3
• Stop the flights.
. Remove and discard the cover plate (a). Refer to the principle of Task 30-60-00-052 (MMA).
. Install a flat cover plate (1). Refer to the principle of Task 30-60-00-051 (MMA).
. Comply with paragraphs 3.B.2.c. and 3.B.2.d.
. Drain the MGB. Refer to Task 60-00-00-641 (MMA).
• Write to Airbus Helicopters, to do a detailed inspection of the MGB at the address that follow:
https://airbusworld.helicopters.airbus.com
. Remove the MRM. Refer to Task 62-20-00-021 (MMA).
Revision 0  2022-05-23  Page 10/13
Revision 1 2023-02-28  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 11 (OCR)

AIRBUS  HELICOPTERS
No. EC225-62A016
• During the detailed inspection:
.. If the MGB is declared as airworthy:
- Fill the MGB with oil. Refer to Task 60-00-00-641 (MMA).
- Install the MRM. Refer to Task 62-20-00-421 (MMA).
- Continue flights.
.. If the MGB is declared as not airworthy:
- Replace the MGB and send it to an approved D-Level center for repair.
- Install an airworthy MGB.
- Install the MRM. Refer to Task 62-20-00-421 (MMA).
- Continue flights.
3.B.2.c. Sample of MGB oil
- Get a sample of MGB oil. Refer to Work Card 20-08-02-601 (MTC).
- Send the oil sample to an Airbus Helicopters approved laboratory for an analysis of the water content.
3.B.2.d. Analysis of the results
- If there is 1000 pm of water or more in the oil sample:
. Stop the flights.
. Drain the MGB. Refer to Task 60-00-00-641 (MMA).
• Write to Airbus Helicopters, to do a detailed inspection of the MGB at the address that follow:
https://airbusworld.helicopters.airbus.com
. Remove the MRM. Refer to Task 62-20-00-021 (MMA).
• During the detailed inspection:
.. If the MGB is declared as airworthy:
- Fill the MGB with oil. Refer to Task 60-00-00-641 (MMA).
- Install the MRM. Refer to Task 62-20-00-421 (MMA).
- Continue flights.
.. If the MGB is declared as not airworthy:
- Replace the MGB and send it to an approved D-Level center for repair.
- Install an airworthy MGB.
- Install the MRM. Refer to Task 62-20-00-421 (MMA).
- Continue flights.
- If there is less than 1000 ppm of water in the oil sample:
. No more action is necessary.
3.B.3. Final steps
- Do an appearance check on the helicopter after an inspection or repair. Refer to
Work Card 20-07-03-408 (MTC).
- Install or close all cowlings, panels, doors and items of equipment that you removed and/or opened during
the preliminary steps (paragraph 3.B.1. of this ALERT SERVICE BULLETIN).
- Connect all the electrical power supplies. Refer to Work Card 20-07-03-406 (MTC).
- Remove the access equipment.
Revision 0  2022-05-23  Page 11/13
Revision 1  2023-02-28  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 12 (OCR)

AIRBUS  HELICOPTERS
No. EC225-62A016
3.B.4. Work steps for non-installed equipment or parts
3.B.4.a. Inspection of the screws of the MRM upper stop (Figure 4)
Make sure that "BC" is written on each head of the 10 screws (b) of the upper stop (c):
- If "BC" is written on the heads screws of the upper stop (c):
• If the cover plate (a) is installed, refer to paragraph 3.B.4.b.
. If the cover plate (a) is not installed, the MRM can be installed.
- If "BC" is not written on the heads screws of the upper stop (c):
. Replace one by one the related screws (b) of the upper stop (c) with the screw(s) (2).
Refer to the principle of the Task 62-21-00-062 (MMA).
• If the cover plate (a) is installed, refer to paragraph 3.B.4.b.
. If the cover plate (a) is not installed, the MRM can be installed.
3.B.4.b. Check of the flatness of the MRM cover plate
Make sure that the cover plate (a) is flat. Use the rule (zz) on two angles with an angle of 90 degrees
(Figure 1 and Figure 4, Detail A):
- If the cover plate (a) is flat (you cannot see a space) between the rules (zz) and the
cover plate (a) (Figure 2):
. The MRM can be installed.
- If the cover plate is not flat (you can see a space) between the rule (zz) and the
cover plate (a) (Figure 3):
. Remove and discard the cover plate (a). Refer to the principle of Task 30-60-00-052 (MMA).
. Install a flat cover plate (1). Refer to the principle of Task 30-60-00-051 (MMA).
• The MRM can be installed.
3.C. RECORD OF COMPLIANCE
Compliance with this document:
- Record the full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the
Log Card (FM) of the MGB. Refer to Work Card 20-08-05-101 (MTC).
- Record compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):
QR code or hypertext link
NOTE
recording  compliance
ALERT  SERVICE  BULLETINS
SB Insight tool does not replace the recording in the
helicopter documents.
ASB EC225 62A016
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Revision 0  2022-05-23  Page 12/13
Revision 1  2023-02-28  This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 13 (OCR)

AIRBUS  HELICOPTERS
No. EC225-62A016
A
b
2
Back to paragraphs 3.B.2.a., 3.B.2.b., 3.B.4.a. and 3.B.4.b.
Figure 4
Revision 0  2022-05-23  Page 13/13
Revision 1 2023-02-28  This document is available on the Internet: www.airbushelicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
