# Airbus Helicopters Emergency Alert Service Bulletin SA341-65.71

Copy: No revision named ("Airbus Helicopters EASB SA341-65.71 and SA342-65.71 Rev 2"), 17 pages: PDF https://openairdocs.org/files/sha256/ed/7b/ed7bbb838b44d2b55c878c775f70943d5bc8307c2a9b5872e4d4b8a59e635102; text https://openairdocs.org/service-documents/airbus-helicopters/sa341-65-71/file/ed7bbb838b44.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2023-1506, the docket of AD 2023-13-51. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Emergency Alert Service Bulletin)
- Number: SA341-65.71
- Page: https://openairdocs.org/service-documents/airbus-helicopters/sa341-65-71

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2023-13-51](https://openairdocs.org/ad/2023-13-51.md), effective Aug 8, 2023: No revision named
- [AD 2022-19-08](https://openairdocs.org/ad/2022-19-08.md), effective Oct 3, 2022: No revision named

## Text (17 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2023-1506, the docket of AD 2023-13-51. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS  HELICOPTERS
EMERGENCY
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE
ROTORS AND DRIVE SHAFTS - Tail rotor
Check of the blade root of the Tail Rotor Blade (TRB)
For the attention of
HELICOPTER  Version(s)
NUMBER
CONCERNED  Civil  Military
SA341  65.71  B, C, D, E, F, H
SA342  65.71  K, L, L1, M, M1, MA
Revision No.  Date of issue
Revision 0  2022-08-04
Revision 1  2022-09-21
Revision 2  2023-06-19
Summary:
The purpose of this ALERT SERVICE BULLETIN is to do a visual check of the TRB root area and, if necessary,
to do a dye penetrant inspection.
Reason for last Revision:
The purpose of revision 2 of this ALERT SERVICE BULLETIN is to:
- Remove the effectivity limitation about Time Since New (TSN) in paragraph 1.A.
- Modify the compliance time in paragraph 1.E.2.
Compliance:
It is mandatory to comply with this ALERT SERVICE BULLETIN.
Export Control:
US Export Control - No US content. This Item does not contain any U.S. origin ITAR or EAR content.
FR Export Control - Not Listed. This Item is not listed against the EC regulations in the EU/FR.
Revision 0 2022-08-04  Page 1/17
Revision 2 2023-06-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 2 (OCR)

AIRBUS  HELICOPTERS
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
Helicopters equipped with TRBs P/N 341A33-5130-04 or P/N 341A33-5130-06 delivered before
August 04, 2022.
NOTE
Refer to the Log Card (FM) to identify the modification status
of the equipment.
1.A.2. Non-installed equipment or parts
TRBS P/N 341A33-5130-04 or P/N 341A33-5130-06 delivered before August 04, 2022.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Revision 0:
Airbus Helicopters found a defect on several forged TRBS that could lead to a crack which could lead to a
blade failure.
Consequently this ALERT SERVICE BULLETIN asks to inspect the affected TRBS, and if necessary to do a
dye penetrant inspection.
Revision 1:
The purpose of the revision 1 is to specify that only the blades delivered before August 04, 2022 are
concerned with this ALERT SERVICE BULLETIN.
Revision 1 of this ALERT SERVICE BULLETIN has no effect on the compliance with revision 0 of this
ALERT SERVICE BULLETIN.
Revision 2:
The purpose of revision 2 of this ALERT SERVICE BULLETIN is to:
- Remove the effectivity limitation about Time Since New (TSN) in paragraph 1.A.
- Modify the compliance time in paragraph 1.E.2.
Revision 2 of this ALERT SERVICE BULLETIN has no effect on the compliance with previous revision of this
ALERT SERVICE BULLETIN.
1.D. DESCRIPTION
This ALERT SERVICE BULLETIN consists to:
- Do a visual check of the TRB root area.
- If necessary, do a dye penetrant inspection of the TRB root area.
- If necessary, replace the TRB.
Revision 0 2022-08-04  Page 2/17
Revision 2 2023-06-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 3 (OCR)

AIRBUS  HELICOPTERS
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Not applicable.
1.E.2. Compliance in service
It is the operator who does the work on the helicopter.
Helicopters/installed equipment or parts:
For helicopter which have TRBs with a TSN less or equal than 500 Flight Hours (FH):
Comply with paragraph 3. (except paragraph 3.B.4.) not more than 10 flight hours after you received
revision O of this ALERT SERVICE BULLETIN. Refer to the issue date on the page footer.
For helicopter which have TRBs with a TSN more than 500 Flight Hours (FH):
Comply with paragraph 3. (except paragraph 3.B.4.) not more than 10 flight hours after you received
revision 2 of this ALERT SERVICE BULLETIN. Refer to the issue date on the page footer.
Non-installed equipment or parts:
Before you install a TRB identified in paragraph 1.A.2., comply with paragraph 3.B.4.
1.F. APPROVAL
The technical content of this document is approved under the authority of the Design Organization Approval
ref. EASA. 21J.700.
The technical content of this document is approved under the prerogatives of the recognition of design
capability ref. FRA21J-002-DGA for French Government helicopters.
The technical content of this document is approved by Airbus Helicopters Airworthiness Department for
export military versions.
1.G. MANPOWER
Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this
qualification:
Qualification: 1 Mechanical technician.
The man-hours are an estimate given for information only and for a standard configuration.
Man-hours:
- 5 minutes to do the visual check for one TRB (paragraph 3.B.2.).
- If necessary, 45 minutes to do a dye penetrant inspection for one TRB (paragraph 3.B.3.).
1.H. WEIGHT AND BALANCE
Not applicable.
Revision 0  2022-08-04  Page 3/17
Revision 2 2023-06-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 4 (OCR)

AIRBUS  HELICOPTERS
1.I. POWER CONSUMPTION
Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K. REFERENCES
These documents are necessary to comply with this ALERT SERVICE BULLETIN:
Maintenance Manual (MAT 8701):
MAT 8701: 53.00.300: TETE ROTOR ARRIERE - PALES ARRIERES - Consignes
Maintenance Manual (MAT 8703):
MAT 8703: 53.30.851: Replacement d'une pale et de son palier (Avant modification 07.6507/S3289)
MAT 8703: 53.30.852: Replacement d'une pale et de son palier (Avant modification 07.6507/S328)
MAT 8703: 53.30.854: Replacement d'une pale et de son palier (Après modification 07.6507/S328)
MAT 8703: 53.30.855: Replacement d'une pale et de son palier (Après modification 07.6507/S328)
Storage Manual (MAT 8707):
MAT 8707: 53.00.902: TETE ROTOR ARRIERE - PALES ARRIERE - Stockage - déstockage du moyeu
rotor arrière
Maintenance Manual (MDE):
MDE: 65.20.300: TAIL ROTOR HEAD - TAIL ROTOR BLADES - Instructions
MDE: 65.20.402: TAIL ROTOR HEAD - TAIL ROTOR BLADES - Removal-Installation of the Tail Rotor
MDE: 65.20.902: TAIL ROTOR HEAD - TAIL ROTOR BLADES - Preservation - depreservation of the TRH
Standard Pratices Manual (MTC):
MTC: 20-02-09-101: Crack detection through dye-penetrant inspection: General - Crack detection
MTC: 20-02-09-601: Checking structural parts / components using the dye penetrant procedure - Crack
MTC: 20-04-01-402: Cleaning of removed individual parts with liquid solvents - Cleaning
MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power
generating systems - Technical instructions
MTC: 20-07-03-408: Appearance checks on an aircraft after inspection or repair - Technical instruction
Information Notice (IN):
IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service
IN: 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight
1.L. OTHER AFFECTED PUBLICATIONS
Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Not applicable.
Revision 0  2022-08-04  Page 4/17
Revision 2 2023-06-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 5 (OCR)

AIRBUS  HELICOPTERS
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Price
For information about the price of the modification kits and/or components, or for aid, contact the
Airbus Helicopters Network Sales and Customer Relations Department.
Availability
Contact the Sales and Customer Relations Department to know the delivery lead times.
Procurement
Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations
Department:
Airbus Helicopters
Etablissement de Marignane
Direction Ventes et Relations Client
13725 MARIGNANE CEDEX
FRANCE
In the purchase order, write the information that follows:
- The mode of transport
- The destination
- The serial numbers of the helicopters to change.
2.B. LOGISTIC INFORMATION
Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Equipment or part to be ordered for one helicopter or one assembly:
Former
Key Word  Qty  New reference  Item
reference→  Instruction
Rear blade  A/R  341A33-5130-04  1  341A33-5130-04  Discard if
necessary
Or
Rear blade  A/R  341A33-5130-06  2  341A33-5130-06  Discard if
necessary
Consumables to be ordered separately:
Refer to the Work Cards mentioned in this ALERT SERVICE BULLETIN.
You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN No. 3481-1-00).
If you cannot get access to e-ordering, please contact your Logistic Focal Point.
Revision 0  2022-08-04  Page 5/17
Revision 2  2023-06-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 6 (OCR)

AIRBUS  HELICOPTERS
Special tools:
Refer to the Work Cards mentioned in this ALERT SERVICE BULLETIN and list below:
Key Word  Qty  Reference or equivalent  Item
Lamp (1000 lux)  Commercial P/N  ZZ
Free lint rags  Commercial P/N  УУ
Z.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision 0 2022-08-04  Page 6/17
Revision 2 2023-06-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EG_NoUScontent - FR_EC_NotListed

### Page 7 (OCR)

AIRBUS  HELICOPTERS
3. ACCOMPLISHMENT INSTRUCTIONS
3.А. GENERAL
Read and comply with the general instructions for TRBS. Refer to Work Card 53.00.300 (MAT 8701) or
65.20.300 (MDE).
3.B. WORK STEPS
Only the check of one TRB is given. Do the same procedure for the other TRBS.
3.B.1. Preliminary steps
- Install the appropriate access equipment.
- Disconnect all the electrical power supplies. Refer to Work Card 20-07-03-406 (MTC).
- Remove and/or open all applicable cowlings, panels, doors and other items of equipment to get access to
the different work areas.
3.B.2. Visual check of the TRB (Figure 1 and Appendices 4.A. and 4.B.)
- Before any cleaning of the TRB (a), do a visual check into the Area (A) on both sides of the TRB (a) to
detect if there is presence of a linear indication with the lamp (zz) (Detail B).
NOTE 1
A linear indication is an indication for which the longest
dimension is at least three times longer than the smallest
one. Refer to Appendix 4.A.1. for example of the linear
indication.
The concerned indication is perpendicular to fiber direction
of the blade. Refer to Appendix 4.B.
WARNING
IT IS STRICTLY FORBIDDEN TO PERFORM A
MANUAL OR MECHANICAL TOUCH UP ON THE
AREA (A) OF THE TRB.
- Clean the Area A with free lint rags (yy) soaked of solvent adapted to the material. Refer to
Work Card 20-04-01-402 (MTC).
- Do again a visual check of the TRB (a) with the lamp (zz).
- Interpretation of results that follow all visual checks:
• If no linear indication is found: comply with paragraph 3.B.5. and resume flights.
. If a linear indication is found, comply with paragraph 3.B.3.
NOTE 2
If you need a ferry flight prior to the compliance of
paragraph 3.B.3., contact Airbus Helicopters.
Revision 0  2022-08-04  Page 7/17
Revision 2 2023-06-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 8 (OCR)

AIRBUS  HELICOPTERS
3.B.3. Dye penetrant inspection (Figure 1)
CAUTION
ANY BLADE WITH LINEAR INDICATION ON
WHICH A COLOURED PENETRANT HAS BEEN  PERFORMANCE  USED IN THE PAST MUST BE DISCENT DYE  OF FLUORESCENT
PENETRANT DETECTION IS CONSIDERABLY
DEGRADED IF APPLIED AFTER THE USE OF
COLOURED DYE PENETRANT PRODUCT, EVEN
WITH AN ADEQUATE SURFACE PREPARATION.
CAUTION
FOR  THE  APPLICATION  OF  THE
WORK CARD 20-02-09-101 (MTC), IT IS NOT
PERMITTED TO USE COLORED PENETRANT
TYPE 2.
- Do a dye penetrant inspection of the Area (A) (Detail B). Refer to Work Cards 20-02-09-101 (MTC) and
20-02-09-601 (MTC) and the minimum application below:
• 1A3d = Type 1: Fluorescent penetrant
and method A: directly water-washable penetrant
and Sensitivity level 3 (S3) high sensitivity
and with a Form "d" developer
or
- 1C3d = Type 1: Fluorescent penetrant
and Method C: Penetrant which can be removed with a clean cloth moistened with solvent
and Sensitivity level 3 (S3): high sensitivity
and with a Form: "d" developer.
- Interpretation of results:
. If a linear indication is not detected by the penetrant: comply with paragraph 3.B.5. and resume flights.
• If a linear indication is detected by the penetrant (refer to Appendix 4.A.2. for examples):
.. Remove and discard the TRB (a). Refer to Work Card 53.30.851 or 53.30.852 or 53.30.854 or
53.30.855 (MAT 8703) or 65.20.402 (MDE).
.. Install an airworthy TRB (1) or (2). Refer to Work Cards 53.30.851 or 53.30.852 or
53.30.854 or 53.30.855 (MAT 8703) or 65.20.402 (MDE).
Revision 0  2022-08-04  Page 8/17
Revision 2 2023-06-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 9 (OCR)

AIRBUS  HELICOPTERS
3.B.4. Work steps for non-installed equipment or parts (Figure 1)
WARNING
IT IS STRICTLY FORBIDDEN TO PERFORM A
MANUAL OR MECHANICAL TOUCH UP ON THE
AREA (A) OF THE TRB.
CAUTION
USE WATER ONLY FOR THE CLEANING.
THE CLEANING WITH SOLVENT IS FORBIDDEN
ONLY FOR NON-INSTALLED TRBS.
- Clean the Area (A) with free lint rags (yy) soaked of water.
- Do a visual check of the TRB (a) into the Area (A) on both sides of the TRB (a) to detect the presence of a
linear indication, with the lamp (zz).
NOTE 3
A linear indication is an indication for which the longest
dimension is at least three times longer than the smallest
one. Refer to Appendix 4.A.1. for example of the linear
indication.
The concerned indication is perpendicular to fiber direction
of the blade. Refer to Appendix 4.B.
- Interpretation of results:
• If no linear indication is found: return the TRB (a) to storage mode. Refer to
Work Cards 53.00.902 (MAT 8707) or 65.20.902 (MDE).
. If a linear indication is found: continue to comply with this paragraph.
- Do a degreasing of the Area (A).
Revision 0 2022-08-04  Page 9/17
Revision 2 2023-06-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 10 (OCR)

AIRBUS  HELICOPTERS
CAUTION
FOR THIS STEP, ONLY THE PROCEDURE THAT
FOLLOW IS AUTHORIZED:
- 1A3d = TYPE 1: FLUORESCENT PENETRANT
AND METHOD A: DIRECTLY WATER-WASHABLE
PENETRANT AND SENSITIVITY LEVEL 3 (S3):
HIGH SENSITIVITY AND WITH A FORM: "d"
DEVELOPER.
CAUTION
FOR  THE  APPLICATION  OF  THE
WORK CARD 20-02-09-101 (MTC), IT IS NOT
PERMITTED TO USE COLORED PENETRANT
TYPE 2.
- Do a dye penetrant inspection on the Area (A): 15 minutes + 15 minutes. Refer to
Work Cards 20-02-09-101 (MTC) and 20-02-09-601 (MTC).
CAUTION
DO NOT OVER WASH.
- Do a water washing.
- Dry for a time as short as possible.
- Do a visual inspection before application of developer.
- Apply the non-aqueous wet developer.
- Do an inspection with Ultra Violet (UV).
- Interpretation of results:
• If a linear indication is not detected by the penetrant: return the TRB (a) to storage mode. Refer to
Work Card 53.00.902 (MAT 8707) or Work Card 65.20.902 (MDE).
. If a linear indication is detected by the penetrant (refer to the Appendix 4.A.2. for examples):
.. Discard the TRB (a).
- Comply with the form in the Appendix 4.C.
3.B.5. Final steps
- Comply with the form in the Appendix 4.C.
- Clean and apply the close-up procedure to the work areas and the helicopter. Refer to
Work Card 20-07-03-408 (MTC).
- Install or close all cowlings, panels, doors and items of equipment that you removed and/or opened
during the preliminary steps (paragraph 3.B.1. of this ALERT SERVICE BULLETIN).
- Connect all the electrical power supplies. Refer to Work Card 20-07-03-406 (MTC).
- Remove the access equipment.
- Set the helicopter back to flight condition.
Revision 0  2022-08-04  Page 10/17
Revision 2 2023-06-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 11 (OCR)

AIRBUS  HELICOPTERS
3.C. RECORD OF COMPLIANCE
- Record the full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the
helicopter documents.
- Record the full compliance with this ALERT SERVICE BULLETIN with the revision number, in
the Log Card (FM).
- Record compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):
QR-Code or hypertext link
NOTE 4
The  recording  compliance  with
ALERT SERVICE BULLETINS in the SB Insight tool does
not replace the recording in the helicopter documents.
EASB SA341 65.71  EASB SA342 65.71
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Revision 0 2022-08-04  Page 11/17
Revision 2 2023-06-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 12 (OCR)

AIRBUS  HELICOPTERS
182
168
AREA A
Back to paragraphs 3.B.2. or 3.B.3. or 3.B.4.
Figure 1: check of the TRB root area
Revision 0  2022-08-04  Page 12/17
Revision 2 2023-06-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 13 (OCR)

AIRBUS  HELICOPTERS
4. APPENDICES
4.A. Examples of a linear indication
4.A.1. Examples of concerned linear indications
Total length = 18,9mm
2000pm
Revision 0  2022-08-04  Page 13/17
Revision 2 2023-06-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 14 (OCR)

AIRBUS  HELICOPTERS
Back to paragraphs 3.B.2. or 3.B.4.
Revision 0  2022-08-04  Page 14/17
Revision 2 2023-06-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EG_NotListed

### Page 15 (OCR)

AIRBUS  HELICOPTERS
4.A.2. Examples of linear indication detected by the penetrant
Back to paragraphs 3.B.3. or 3.B.4.
Revision 0  2022-08-04  Page 15/17
Revision 2 2023-06-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 16 (OCR)

AIRBUS  HELICOPTERS
4.B. Fiber direction on the TRB
FIBER DIRECTION
FIBER DIRECTION
Back to paragraph 3.B.2.
Revision 0  2022-08-04  Page 16/17
Revision 2 2023-06-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 17 (OCR)

AIRBUS  HELICOPTERS
4.C. SB Insight Form
EASB SA341 65.71  EASB SA342 65.71
If the QR code or the link above are not accessible, please provide Airbus Helicopters with the information
that follow:
- Helicopter S/N
- Helicopter TSN
- For each blade: P/N, SN, TSN
- Presence of linear indication (YES/NO)
- Pictures for linear indication
Revision 0 2022-08-04  Page 17/17
Revision 2 2023-06-19  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EG_NoUScontent - FR_EC_NotListed

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
