# Airbus Helicopters Alert Service Bulletin SA366-05.48

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 1 ("ASB SA366-05.48 R1"), 10 pages: PDF https://openairdocs.org/files/sha256/81/20/8120b2a79c2a1542356c3c18d71a289f801d731a4c3cb548485c8bac52d455de; text https://openairdocs.org/service-documents/airbus-helicopters/sa366-05-48/file/8120b2a79c2a.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1018; AD 2021-02-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Airbus Helicopters ASB SA366-05.48 Revision 0 ("Airbus Helicopters ASB SA366-05.48 Revision 0"), 10 pages: PDF https://openairdocs.org/files/sha256/13/85/1385293c1365c27a010b29f2a512c537c1b5b66eb65641440ee1d40ec9bb5549; text https://openairdocs.org/service-documents/airbus-helicopters/sa366-05-48/file/1385293c1365.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2018-0384; AD 2018-19-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: SA366-05.48
- Latest revision known: SA366-05.48, Revision 1, dated March 27, 2019 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/sa366-05-48

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2021-02-08](https://openairdocs.org/ad/2021-02-08.md), effective Apr 15, 2021: Revision 1
- [AD 2018-19-01](https://openairdocs.org/ad/2018-19-01.md), effective Oct 22, 2018: No revision named

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/airbus-helicopters/sa366-05-48/proposed.md).

## Text (10 pages)

Revision 1, the newest copy. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1018; AD 2021-02-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS
HELICOPTERS  ASB No. SA366-05.48
Civil version(s): G1
Military version(s): GA
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE
TIME LIMITS - MAINTENANCE CHECKS - Baggage compartment
Inspection of the baggage compartment skin
For the attention of
Revision No.  Date of issue
Revision 0  2017-07-21
Revision 1  2019-03-27
Summary:
This ALERT SERVICE BULLETIN consists in:
- performing a tapping inspection of the baggage compartment external skin within 110 flying hours,
Then,
- performing a periodic visual inspection of the baggage compartment external skin every 110 flying hours,
- performing a periodic tapping inspection of the baggage compartment external skin every 660 flying hours.
Reason for last Revision:
The purpose of revision 1 of this ALERT SERVICE BULLETIN is to give details on the inspection criteria and on the
zones to be inspected.
Compliance:
Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
Revision 0 2017-07-21  Page 1/10
Revision 1 2019-03-27  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS
HELICOPTERS  ASB No. SA366-05.48
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. He Helicopters/installed equipment or parts
All helicopters.
1.A.2. Non-installed equipment or parts
Not applicable.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Revision 0:
Airbus Helicopters has been informed of several cases of debonding of the baggage compartment skin.
These observations were made during the 600-FH inspection of the structure on EC155 helicopters.
The possible causes, which are still under investigation, are the heat of the exhaust gas released by the
exhaust pipes and certain climatic conditions (high heat and high humidity).
Consequently, given the similarity of the definitions of this skin on SA366 helicopters, Airbus Helicopters
introduces a periodic (visual and tapping) inspection of the area.
Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
Reusion 1:
Following feedback from a number of customers, if there is debonding contained within only one square of a
size smaller or equal to 100 x 100 mm (3.94 × 3.94 in), Airbus Helicopters has defined a manual tapping
inspection to be performed every 110 flying hours for the next 330 flying hours to identify any propagation.
If there is no propagation after these 330 flying hours, Airous Helicopters requests a return to general visual
inspections every 110 flying hours and a manual tapping inspection every 660 flying hours.
The purpose of revision 1 of this ALERT SERVICE BULLETIN is to give details on the inspection criteria and
on the zones to be inspected.
Revision 1 of this ALERT SERVICE BULLETIN does not affect compliance with the previous revision of this
ALERT SERVICE BULLETIN.
1.D. DESCRIPTION
Compliance with this ALERT SERVICE BULLETIN consists in:
- performing a tapping inspection of the baggage compartment external skin,
Then,
- performing a periodic visual inspection of the baggage compartment external skin,
- performing a periodic tapping inspection of the baggage compartment external skin.
Revision 0 2017-07-21  Page 2/10
Revision 1 2019-03-27  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS
HELICOPTERS  ASB No. SA366-05.48
1.E. COMPLIANCE
The work on the helicopter is to be performed by the operator.
1.E.1. Compliance at H/C manufacturer level
Not applicable.
1.E.2. Compliance in service
1. E.2.a. Helicopters/installed equipment or parts
Perform a manual tapping inspection of the skin (only in sandwich zone) as per paragraphs 3.B.1. and
3.B.2. within 110 flying hours from receipt of revision 0 of this ALERT SERVICE BULLETIN issued on
July 21, 2017.
Interpretation of the results
- If no debonding (see Note 1) of the external skin is detected:
• perform a visual inspection every 110 flying hours as per paragraphs 3.B.1. and 3.B.3.,
And,
• perform a manual tapping inspection every 660 flying hours as per paragraph 3.B.1. and 3.B.2.
- If the debonded surface(s) (see Note 1) delimited by manual tapping is/are located in only one square of
100 x 100 mm (3.94 x 3.94 in.) or less (see Figure 2):
• Record the size and location of the debonded surface or surfaces, unless already noted during
compliance with revision 0.
• Perform a manual tapping inspection every 110 flying hours of the zones identified as previously
debonded as per paragraphs 3.B. 1. and 3.B.2. (See Note 4):
.. Record the size and location of the debonded surface or surfaces during each inspection.
... If at the end of the third manual tapping inspection at 110 flying hours, there is no significant
propagation (see Note 2) of the previously debonded surface, continue:
.... the general visual inspection every 110 flying hours,
Then,
... the manual tapping inspection every 660 flying hours.
NOTE 1
A debonded zone that is contained within a square of
30 x 30 mm (1.18 x 1.18 in.) is considered permitted and will
be subject to general visual inspection.
NOTE 2
Propagation of the debonded surface is considered
significant if the measured difference of the debonded zone
exceeds 5 mm (.197 in.) between the initial manual tapping
inspection and the most recent manual tapping inspection.
NOTE 3
For any debonding already listed in the helicopter
documentation (see Note 4) during a previous inspection at
660 flying hours, do not repeat the manual tapping
inspection of this debonding every 110 flying hours if there
has been no significant propagation (see Note 2).
Revision 0 2017-07-21  Page 3/10
Revision 1 2019-03-27  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 4 (OCR)

AIRBUS
HELICOPTERS  ASB No. SA366-05.48
NOTE 4
The RDAS (Repair Design Approval Sheets) previously sent
to keep the aircraft temporarily in service under monitoring
remain applicable until the expiration of their defined validity.
- In all other cases of debonding and before resuming flights:
. contact the Airbus Helicopters Customer Support Department to obtain a suitable repair solution through
an RDAS (Repair Design Approval Sheet) by:
- Fax: + 33(0)4.42.85.99.66
- Keycopter : Technical Request Management TechnicalSupport. Helicopters@airbus.com.
- E-mail : support.technical-airframe.ah@airbus.com
1.E.2.b. Non-installed equipment or parts
Not applicable.
1.F. APPROVAL
Approval of modifications:
Not applicable.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on July 21, 2017 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on July 21, 2017 by the Airbus Helicopters Airworthiness Department for export military versions.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved
on March 26, 2019 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved
on March 26, 2019 by the Airbus Helicopters Airworthiness Department for export military versions.
1.G. MANPOWER
For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following
personnel qualification:
Qualification: 1 Airframe Technician qualified for tapping inspections.
The time for the operations is given for information purposes, for a standard configuration.
Time for the operations: - (approximately) 1 hour and 30 minutes to comply with paragraph 3.B.2. on one
side,
- (approximately) 10 minutes to comply with paragraph 3.B.3. on one side.
Revision O  2017-07-21  Page 4/10
Revision 1  2019-03-27  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS
HELICOPTERS  ASB No. SA366-05.48
1.H. WEIGHT AND BALANCE
Not applicable.
1.I. POWER CONSUMPTION
Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K. REFERENCES
The documents required for compliance with this ALERT SERVICE BULLETIN are as follows:
Standard Practices Manual (MTC):
Work Card: 20.03.06.601: Structural repairs - Assembled components check
Work Card: 20.60.00.432: Blade standard practices - Audio control procedure by blade tapping
1.L. OTHER AFFECTED PUBLICATIONS
Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Not applicable.
Revision 0  2017-07-21  Page 5/10
Revision 1 2019-03-27  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 6 (OCR)

AIRBUS
HELICOPTERS  ASB No. SA366-05.48
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
For any information concerning the kits and/or components or for assistance, contact the Airbus Helicopters
Network Sales & Customer Relations Department.
Airbus Helicopters
Etablissement de Marignane
Direction Ventes et Relations Client
13725 MARIGNANE CEDEX
FRANCE
NOTE 1
On the purchase order, please specify the mode of
transport, the destination and the serial numbers of the
helicopters to be modified.
NOTE 2
For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F
Fax: +33 (0)4.42.85.99.96.
2.B. LOGISTIC INFORMATION
Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Consumables to be ordered separately:
Refer to the Work Cards referenced in this ALERT SERVICE BULLETIN.
The consumables can be ordered separately from BDSI.
Website :  https://www.boeingdistribution.com
Telephone:  +1.305.925.2600
Fax :  +1.305.507.7191
AOG :  +1.305.471.8888
AOG email :  AOGdesk@Boeingdistribution.com
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Reusion O  2017-07-21  Page 6/10
Revision 1 2019-03-27  This document is available on the internet: www.airbushe licopters. com/techpub/

### Page 7 (OCR)

AIRBUS
HELICOPTERS  ASB No. SA366-05.48
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
Not applicable.
3.B. WORK STEPS
The inspections are performed on the RH and LH side of the helicopter.
If there is not a cargo door on the RH side of the helicopter, all of the external skin zone of the luggage
compartment must be inspected.
3.B. 1. Preliminary steps
- Install the access equipment.
- Remove and/or open any cowlings, panels, doors and equipment required to gain access to the different
work areas.
- If necessary, remove the thermal protection.
3.B.2. Manual Tapping inspection of the baggage compartment external skin (Figure 1)
- Perform a manual tapping inspection of the external skin (only in sandwich zone) located between frames
X4630 and X6630 (see Figure 1) as per MTC Work Cards 20.03.06.601 and 20.60.00.432.
NOTE 1
The manual tapping inspection is to be performed on
sections of 30 mm (1.18 in.) maximum, along the X and Z
axes.
NOTE 2
The skin must be clean for this inspection.
- Interpret the results as per paragraph 1.E.2.a.
- Then comply with paragraph 3.B.4.
3.B.3. Visual inspection of the baggage compartment external skin (Figure 1)
- Perform a visual inspection of the baggage compartment external skin between frames X4630 and X6630
(see Figure 1) using low-angled light (e.g. LED bar):
NOTE 3
The skin must be clean for this inspection.
NOTE 4
The areas situated under the thermal shields are not subject
to visual inspections every 110 flying hours, but to
inspections every 660 flying hours.
Revision 0 2017-07-21  Page 7/10
Revision 1 2019-03-27  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 8 (OCR)

AIRBUS
HELICOPTERS  ASB No. SA366-05.48
. in the event of distortion, wrinkling or corrosion: comply with paragraph 3.B.2.
. otherwise, comply with paragraph 3.B.4.
3.B.4. Final steps
- Remove the access equipment.
- Install and/or close any cowlings, panels, doors and equipment removed and/or opened during the
preliminary steps (paragraph 3.B.1.).
- If necessary, install the thermal protection.
3.C. COMPLIANCE CONFIRMATION
Compliance with this document:
Record first compliance with this ALERT SERVICE BULLETIN, with the revision number, in the helicopter
documents.
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Revision 0  2017-07-21  Page 8/10
Revision 1 2019-03-27  This document is available on the internet: www.airbushelicopters.com/techpub/

### Page 9 (OCR)

AIRBUS
HELICOPTERS  ASB No. SA366-05.48
150mm (5.91 in.)  Inspection zone (sandwich)
parallel to Engine floor  Supplementary inspection zone if no
door
Stainless steel strip
Engine floor
Parallel to  Lower point of the
floor  stainless steel strip
300 mm (11.81 in.)
Areas to be inspected:
LH and RH skin
X4630
X6630
Figure 1: Delimitation of the areas to be inspected
Revision O  2017-07-21  Page 9/10
Revision 1 2019-03-27  This document is available on the internet: www.airbushe  copters.com/techpub/

### Page 10 (OCR)

AIRBUS
HELICOPTERS  ASB No. SA366-05.48
Only one square of 100 x 100 mm (3.94
x 3.94 in.) or less
Example of
acceptable debonding and
subject to monitoring
Debonded
surfaces
Examples of
unacceptable debonding
Square of 100 x 100 mm
(3.94 × 3.94 in.) or less, but
straddling two skin panels
Debonded
surfaces
Square greater than 100 × 100
mm (3.94 × 3.94 in.)
Figure 2: Examples of debonded surfaces
Revision 0  2017-07-21  Page 10/10
Revision 1 2019-03-27  This document is available on the internet: www.airbushelicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
