# Airbus Helicopters Emergency Alert Service Bulletin 05.95

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 1 ("Airbus Helicopters EASB No 05.95 Rev 1"), 12 pages: PDF https://openairdocs.org/files/sha256/17/22/1722fc1cec70e73f232e23f38990787fdf0988e4e4be48a9f1121ac4c502fa98; text https://openairdocs.org/service-documents/airbus-helicopters/sb-05-95/file/1722fc1cec70.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2019-1056; AD 2020-16-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Eurocopter EASB No. 05-95 ("Eurocopter EASB No. 05-95"), 12 pages: PDF https://openairdocs.org/files/sha256/2a/86/2a8612f65c0162989e1627a7e676630d2987237a599d5a19e4b268dfe4a654df; text https://openairdocs.org/service-documents/airbus-helicopters/sb-05-95/file/2a8612f65c01.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2009-1124; AD 2009-25-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md)
- Type: Service bulletin (Emergency Alert Service Bulletin)
- Number: 05.95
- Latest revision known: 05.95, Revision 1, dated October 22, 2015 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/sb-05-95

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2020-16-09](https://openairdocs.org/ad/2020-16-09.md), effective Sep 10, 2020: Revision 1
- [AD 2009-25-09](https://openairdocs.org/ad/2009-25-09.md), effective Dec 29, 2009: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus-helicopters/sb-05-95/proposed.md).

## Text (12 pages)

Revision 1, the newest copy. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2019-1056; AD 2020-16-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Page 1/12
  2015.10.22
This document is available on the internet: www.airbushelicopters.com/techpub   
 
 Airbus Helicopters   
 DIRECTION TECHNIQUE SUPPORT 
13725 MARIGNANE  CEDEX FRANCE   
   
       
EMERGENCY 
ALERT SERVICE BULLETIN 
 
 
PUMA NUMBER VERSIONS 
SA330 05.95 
Civil:  J 
Military: Ba, L 
  
  
  
 
 
 
SUBJECT:  MAIN ROTOR DRIVE  
 
Readjusting or checking the tightening torque load of the attachment 
hardware and checking the integrity of the Main Gear Box input flexible 
couplings 
 
ATA: 65 
 
 
REVISION No.  
 
DATE OF APPROVAL 
 
DATE OF ISSUE 
 
   
Revision 0 On: March 03, 2008 2008.03.03 
   
Revision 1 On: October 22, 2015 2015.10.22

### Page 2

Page 2/12
  2015.10.22
This document is available on the internet: www.airbushelicopters.com/techpub   
 
 
 
1. PLANNING INFORMATION  
 
1.A. EFFECTIVITY 
 
1.A.1. Helicopters / Installed equipment 
 
On MGB input flexible coupling/sliding and fixed flange assemblies POST MOD 0752416 and POST 
MOD 0752419 or POST MOD S712 (refer to the Log Card (FME) of the MGB and NOTE 1), except those 
assemblies which meet one of the following criteria: 
  
- Which comply with MDE Work Card 65.32.601 or the equivalent military MAT 8582 Work Card 321X 
(see NOTE 2) since new or since the last General Overhaul of the MGB (see NOTE 3).  
 
Or, 
 
- Which equip an MGB which has undergone General Overhaul after 01/04/2015 and which have not 
been replaced since the General Overhaul of the MGB, 
 
Or, 
 
- Which equip an MGB and have been subjected to an intervention in a D level workshop  
after 01/04/2015. 
 
1.A.2. Non-installed equipment 
 
On MGB input flexible coupling/sliding and fixed flange assemblies POST MOD 0752416 and POST 
MOD 0752419 or POST MOD S712 (refer to the Log Card (FME) of the MGB and NOTE 1) fitted on MGBs 
which have undergone Complete Overhaul (RG) before 01/04/2015, and which have never undergone 
compliance with Maintenance Manual (MDE) Work Card 65.32.601 or the equivalent MAT 8582 military 
Work Card 321X (refer to NOTE 2) since new or Complete Overhaul of the MGB (refer to NOTE 3).  
 
NOTE 1 
 
 MOD S 712 is the equivalent military modification for MOD 0752416 and MOD 0752419  
 
NOTE 2 
 
The Maintenance Manual (MDE) Work Card  65.32.601 or equivalent military MAT 8582 
Work Card 321X defines the flexible coupling inspection and attachment hardware tightening 
torque application and is systematically applicable during the P2 inspection  
 
NOTE 3 
 
The flexible coupling is a component systematically replaced through the MGB complete overhaul. 
The flying hours specified in this ALERT SERVICE BULLETIN therefore have to be considered: 
- since the complete overhaul of the MGB if the flexible couplings or flexible coupling/sliding and 
fixed flanges assemblies have never been replaced on the MGB since last MGB complete 
overhaul, or 
- since the installation on the MGB of a new flexible coupling or a new flexible coupling/sliding and 
fixed flanges assembly if such new installation occurred after the last MGB complete overhaul.

### Page 3

Page 3/12
  2015.10.22
This document is available on the internet: www.airbushelicopters.com/techpub   
 
 
 
1.B. ASSOCIATED REQUIREMENTS 
 
Not applicable. 
 
 
1.C. REASON 
 
Revision 0: 
 
To readjust or to check the tightening torque load of the bolts attaching the flexible coupling to the sliding 
coupling flange and the bolts attaching the flexible coupling to the fixed coupling flange, in order to prevent 
any damage to the flexible couplings, which, over time, may lead to the loss of the coupling.  
 
Revision 1: 
 
The purpose of Revision 1 is to cancel the instructions of this ALERT SERVICE BULLETIN for the MGBs 
upon which a double check was carried out during the assembling of the flexible coupling/flange assemblies 
in level three maintenance.  
 
 
1.D. DESCRIPTION 
 
Revision 0: 
 
During a ground run-up, the flight crew suddenly heard a noise and noticed vibrations coming from the main 
gear box (MGB) compartment along with a smell of burning.  
The pilot then decided to shut down the engines without applying the rotor brake.  
Examination of the helicopter carried out following the engine shutdown, revealed damage to the interface of 
the engine coupling tube with the LH MGB input, associated with the failure of the flexible coupling of this 
MGB input.  
This is the first case of flexible coupling failure that has been reported since MOD 0752416 and MOD 
0752419 or MOD S712 (see NOTE 1) were introduced. 
The examinations carried out on the affected components have revealed a progressive fatigue failure of the 
coupling disks. 
The failure starts from areas affected by extensive fretting on the faces and in the holes of the flexible 
coupling disks. 
This occurrence of fretting is the result of loss of the tightening torque load or insufficient tightening of the 
bolts attaching the flexible coupling to the flanges. 
To date, this occurrence of tightening torque load loss or insufficient tightening is identified only on the MGB 
input flexible coupling. 
The cause of this loss of tightening torque load or insufficient tightening has not yet been established and 
EUROCOPTER is continuing the investigations and analyses. 
 
Pending the results of these analyses and in order to reveal any deterioration of these couplings, which may 
lead to the loss of the drive of one or even both MGB inputs over time, EUROCOPTER renders compliance 
with the measures defined in this ALERT SERVICE BULLETIN mandatory. 
 
Revision 1: 
 
The analyses carried out by Airbus Helicopters revealed that the observed damage was due to insufficient 
tightening during the Overhaul/Repair activity.  
For this reason, the assembling procedure has been modified in order to prevent this type of event.  
This action enables compliance with this ALERT SERVICE BULLETIN to be canceled for MGB input flexible 
coupling/sliding and fixed flange assemblies described in paragraph 1.A.

### Page 4

Page 4/12
  2015.10.22
This document is available on the internet: www.airbushelicopters.com/techpub   
 
 
 
1.E. COMPLIANCE  
 
Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory. 
 
1.E.1. Compliance at the works 
 
1.E.1.a. On helicopters: Not applicable. 
 
1.E.1.b. On non-installed equipment: Not applicable. 
 
1.E.2. Compliance in operation: By the operator: 
 
1.E.2.a. On helicopters / installed equipment: 
 
For MGBs concerned by Paragraph 1.A.: 
 
On receipt of this ALERT SERVICE BULLETIN, issued on March 03, 2008:  
 
1) For MGB input flexible coupling/sliding and fixed flanges assemblies which have logged less than 50 
flying hours since new or MGB complete overhaul (see NOTE 3): 
- comply with paragraph 2.B.2.a. of this ALERT SERVICE BULLETIN when these assemblies have 
logged between 50 and 75 flying hours.  
 
2) For MGB input flexible coupling/sliding and fixed flanges assemblies which have logged between 50 
and 75 flying hours since new or MGB complete overhaul (see NOTE 3): 
- comply with paragraph 2.B.2.a. of this ALERT SERVICE BULLETIN at the latest when these 
assemblies reach 75 flying hours, or comply with paragraph 2.B.2.b. at the latest when these 
assemblies reach 125 flying hours. 
 
3) For MGB input flexible coupling/sliding and fi xed flanges assemblies which have logged more than 75 
flying hours since new or MGB complete overhaul (see NOTE 3): 
- comply with paragraph 2.B.2.b. of this ALERT SERVICE BULLETIN at the latest when these 
assemblies reach 50 flying hours following receipt of this ALERT SERVICE BULLETIN, issued on 
the date indicated at the foot of the page.  
 
4) Each time a MGB input flexible coupling/sliding and fixed flanges assembly that has logged less than 
50 flying hours since new or MGB complete overhaul (see NOTE 3), is installed:  
- comply with paragraph 2.B.2.a. of this ALERT SERVICE BULLETIN when these assemblies have 
logged between 50 and 75 flying hours from the date on which they were put into service.

### Page 5

Page 5/12
  2015.10.22
This document is available on the internet: www.airbushelicopters.com/techpub   
 
 
 
1.E.2.b. On non-installed equipment: 
 
1) For MGB input flexible coupling/sliding and fixed flanges assemblies which have logged between 50 
and 75 flying hours since new or MGB complete overhaul (see NOTE 3): 
- comply with paragraph 2.B.2.a. of this ALERT SERVICE BULLETIN before installation. 
 
2) For MGB input flexible coupling/sliding and fi xed flanges assemblies which have logged more than 75 
flying hours since new or MGB complete overhaul (see NOTE 3):  
- comply with paragraph 2.B.2.b. of this ALERT SERVICE BULLETIN before installation. 
 
 
1.F. APPROVAL 
 
Approval is limited to civil version helicopters subject to an Airworthiness Certificate. 
 
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved  
on March 03, 2008 under the authority of EASA Design Organization Approval No. 21J.056. 
 
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved  
on October 22, 2015 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters 
of civil versions subject to an Airworthiness Certificate. 
 
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved  
on October 22, 2015 under the prerogatives of the recognition of design capability FRA21J-002-DGA for 
French Government helicopters. 
 
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved  
on October 22, 2015 by the Airbus Helicopters Airworthiness Department for export military versions. 
 
 
1.G. MANPOWER 
 
Qualification: Mechanic. 
 
Time for the operations: Approximately 8 hours to comply with paragraph 2.B.2.a. 
Time for the operations: Approximately 10 hours to comply with paragraph 2.B.2.b. 
 
 
1.H. WEIGHT AND BALANCE  
 
Not applicable. 
 
 
1.I. EFFECT ON ELECTRICAL LOADS 
 
Not applicable. 
 
 
1.J. SOFTWARE MODIFICATION EMBODIMENT STATE 
 
Not applicable.

### Page 6

Page 6/12
  2015.10.22
This document is available on the internet: www.airbushelicopters.com/techpub   
 
 
 
1.K. REFERENCES 
 
Maintenance Manual (MDE) Work Cards: 65.32.411 
 65.32.408 
 65.32.601 
 71.00.401. 
Or 
 
MAT 8582, Work Cards: 702C 
 321P 
 321PH 
 321X 
 
Standard Practices Manual (MTC) Work Card: 20.02.05.404. 
 
 
1.L. OTHER DOCUMENTS CONCERNED  
 
MAT 8582. 
 
 
1.M. TOOLING CONCERNED 
 
 Not applicable. 
 
 
1.N. INTERCHANGEABILITY AND MIXABILITY OF PARTS  
 
Not applicable.

### Page 7

Page 7/12
  2015.10.22
This document is available on the internet: www.airbushelicopters.com/techpub   
 
 
 
2. ACCOMPLISHMENT INSTRUCTIONS 
 
2.A. GENERAL 
 
The operational procedure given in paragraph 2.B. is  described for one side and must be applied to the RH 
and LH sides of the engine-to-MGB coupling. 
 
 
2.B. OPERATIONAL PROCEDURE  
 
2.B.1. Preliminary steps 
 
- Install the equipment providing access to the MGB. 
- Install the engine cowling walkways. 
 
2.B.2.a. Readjusting the tightening torque load on the flexible coupling-to-flange attachment bolts. 
 
As per Figure 1: 
 
- Remove the engine as per MDE Work Card 71.00.401 or MAT 8582 Work Card 702C. 
- Remove coupling flange assembly (a) as per MD E Work Cards 65.32.411 and 65.32.408 or as per MAT 
8582 Work Cards 321PH and 321P. 
- Readjust the tightening torque load of the 6 nuts (b) to  the tightening torque specified in MDE Work Card 
65.32.411 or MAT 8582 Work Card 321PH and in accor dance with the procedure described in MTC Work 
Card 20.02.05.404. Refer also to Service Letter No. 1809- 00-06, the main technical instructions of which 
are reminded here-after:  
 Loosen sufficiently the assembly to allow m easurement of the locking torque of the nut. 
 Re-tighten to a tightening torque equal to the s pecified tightening torque plus the measured locking 
torque of the nut. 
- Install coupling flange assembly (a) as per MDE Work Card 65.32.408 or MAT 8582 Work Card 321P. 
- Install the engine as per MDE Work Card 71.00.401 or MAT 8582 Work Card 702C. 
- Return the helicopter to flight configuration in compliance with paragraph 2.B.3. 
 
2.B.2.b. Checking the tightening torque load on the flexible coupling-to-flange attachment bolts. 
 
NOTE 4 
 
Should it be impossible to check t he tightening torque load of the nuts 
(tooling unavailable or other reasons ), apply the procedure described for 
case No. 2 in the “Interpretation of the results” chapter.

### Page 8

Page 8/12
  2015.10.22
This document is available on the internet: www.airbushelicopters.com/techpub   
 
 
 
As per Figure 1: 
 
- Remove the engine as per MDE Work Card 71.00.401 or MAT 8582 Work Card 702C. 
- Remove coupling flange assembly (a) as per MD E Work Cards 65.32.411 and 65.32.408 or as per MAT 
8582 Work Cards 321PH and 321P. 
- Measure the tightening torque on the 6 nuts (b) in a ccordance with the procedure described in MTC Work 
Card 20.02.05.404. Refer also to Service Letter No. 1809- 00-06, the main technical instructions of which 
are reminded here-after:  
. Identify the position of the nut relative to the assembly. 
. Loosen sufficiently the assembly to allow measurement of the locking torque of the nut.  
. Re-tighten using a torque wrench until the mark on t he nut is aligned with the mark on the assembly and 
note the torque applied for this operation. 
. Then calculate the difference between this applied to rque and the locking torque of the nut; this is the 
effective tightening torque 
- Identify the nuts (b) whose effective tightening torque is below 1.3 m.daN. 
 
Interpretation of the results: 
 
1) If the effective tightening torque of a ll nuts (b) is equal to or above 1.3 m.daN: 
 
- Readjust the tightening torque load of the nut s (b) and apply the procedure described in paragraph 
2.B.2.a. 
 
2) If the effective tightening torque of at  least one nut (b) is below 1.3 m.daN: 
 
- Remove flexible coupling assembly (c) from coupling flange assembly (a) as per MDE Work Card 
65.32.411 or MAT 8582 Work Card 321PH. 
- Disassemble flexible coupling assembly (c) as per MDE Work Card 65.32.601 or MAT 8582 Work 
Card 321X and check all the coupling disks to make su re that there is no crack. Special attention 
must be given to the area around the holes. 
 
. If there is no crack in any of the disks (f) of flexible coupling assembly (c): 
- Leave as is. 
 - Install flexible coupling assembly (c) on coupling flange assembly (a) as per MDE Work Card 
65.32.411 or MAT 8582 Work Card 321PH. 
- Torque the nuts (b) to the tightening torque s pecified in MDE Work Card 65.32.411 or MAT 8582 
Work Card 321PH and in accordance with the procedure described in MTC Work Card 
20.02.05.404 (refer to Service Letter No. 1809-00-06). 
- Install coupling flange assembly (a) as per MDE Work Card 65.32.408 or MAT 8582 Work Card 
321P. 
- Install the engine as per MDE Work Card 71.00.401 or MAT 8582 Work Card 702C. 
- Return the helicopter to flight configuration in compliance with paragraph 2.B.3. 
 
. If there are cracks in one or more disks (f ) of flexible coupling assembly (c): 
- discard flexible coupling (c), bolts (d), washers (e) and nuts (b) before resuming flights.

### Page 9

Page 9/12
  2015.10.22
This document is available on the internet: www.airbushelicopters.com/techpub   
 
 
 
IF THERE IS A CRACK IN A FLEXIBLE COUPLING 
(c) DISK (f), YOU MUST REPLACE ALL THE DISKS 
OF FLEXIBLE COUPLING ASSEMBLY (c), BOLTS 
(d), WASHERS (e) AND NUTS (b). 
 
- Contact the Airbus Helicopters Customer Service Technical Support Operation Department 
(STVM) by: 
. Tel: +33 (0)4.42.85.99.67 
. Fax: +33 (0)4.42.85.99.66 
- Install a new flexible coupling assembly (c): 
. Install the new flexible coupling assembly (c) on coupling flange assembly (a) as per MDE 
Work Card 65.32.411 or MAT 8582 Work Card 321PH. 
. Torque tighten the nuts (b) to the tightening to rque specified in MDE Work Card 65.32.411 or 
MAT 8582 Work Card 321PH and in accordance with the procedure described in MTC Work 
Card 20.02.05.404 (refer to Service Letter No. 1809-00-06). 
. Install coupling flange assembly (a) as per MDE Work Card 65.32.408 or MAT 8582 Work 
Card 321P. 
. Install the engine as per MDE Work Ca rd 71.00.401 or MAT 8582 Work Card 702C. 
. Return the helicopter to flight confi guration in compliance with paragraph 2.B.3. 
 
2.B.3. Final steps 
 
- Remove the engine cowling walkways. 
- Remove the equipment providing access to the MGB. 
- Resume flights. 
 
 
2.C. IDENTIFICATION 
 
Record compliance with this ALERT SERVICE BULLETIN in the log card of the Main Gear Box (MGB). 
 
 
2.D. OPERATING AND MAINTENANCE INSTRUCTIONS 
 
Not applicable. 
 
CAUTION

### Page 10 (OCR)

AIRBUS
HELICOPTERS
Fixed coupling
flange
Sliding
coupling flange
Figure 1
Page 10/12
2015.10.22
This document is available on the internet: www.airbushelicopters.com/techpub

### Page 11

Page 11/12
  2015.10.22
This document is available on the internet: www.airbushelicopters.com/techpub   
 
 
 
3. MATERIAL INFORMATION  
 
3.A. MATERIAL: COST - AVAILABILITY 
 
3.A.1. Cost 
 
For any information concerning kits and / or components, contact the Sales and Customer Relations 
Department of the Airbus Helicopters Network. 
 
3.A.2. Availability 
 
Kits and / or components will be delivered on customer’s order. 
 
3.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT  
 
Not applicable. 
 
 
3.C. MATERIAL REQUIRED FOR EACH HELICOPTER / ENGINE / COMPONENT 
 
3.C.1. Kit(s) or component(s) to be ordered for one helicopter or one assembly 
 
Material Part Number Qty Item Key Word Former Part Number Instructions 
      
704A33698040 6 b Nut   
330A32937401 1 c Flexible coupling assembly   
330A32936435 6 d Bolt   
330A32939228 12 e Washer    
 
 
3.C.2. Products to be ordered separately 
 
The products required for compliance with the Tasks and / or Work Cards listed in paragraph 1.K., can be 
ordered from the INTERTURBINE AVIATION LOGISTICS company. 
Website:   http://www.interturbine.com 
Telephone:  +49.41.91.809.300 
AOG:   +49.41.91.809.444

### Page 12

Page 12/12
  2015.10.22
This document is available on the internet: www.airbushelicopters.com/techpub   
 
 
 
3.D. PROCUREMENT CONDITIONS  
 
Order the required quantity (unless otherwise specified) 
 
from 
 
Airbus Helicopters 
Etablissement de Marignane 
Direction Ventes et Relations Client 
13725 MARIGNANE CEDEX 
FRANCE 
 
NOTE 5 
 
For ALERT SERVICE BULLETINS, order by: 
Telex: HELICOP 410 969F 
Fax: +33 (0)4 42 85 99 96 
 
NOTE 6 
 
On the purchase order, please specify the mode of 
transport, the destination and the serial numbers of 
the helicopters to be modified. 
 
 
4. APPENDIX 
 
 Not applicable.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
