# Eurocopter Emergency Alert Service Bulletin 05.96

## Copies (3)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- No revision named ("Airbus Helicopters EASB 05_96 Rev 1"), 13 pages: PDF https://openairdocs.org/files/sha256/30/28/3028a46d44190f39c39e9a4945281b2eae84a873c044b761a0a78128c11c3b03; text https://openairdocs.org/service-documents/airbus-helicopters/sb-05-96/file/3028a46d4419.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0092, the docket of AD 2021-09-14. Not covered by OpenAirDocs’ CC0 dedication.
- No revision named ("Airbus Helicopters EASB SA330-05.96 Rev 2"), 14 pages: PDF https://openairdocs.org/files/sha256/2e/0c/2e0c410ae4f8a77955613afb1420f38744e66eb8a2f60b823499cd6716c970b7; text https://openairdocs.org/service-documents/airbus-helicopters/sb-05-96/file/2e0c410ae4f8.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2024-2552, the docket of AD 2025-08-06. Not covered by OpenAirDocs’ CC0 dedication.
- No revision named ("U.S. DOT/FAA -  Eurocopter EASB 05.96"), 11 pages: PDF https://openairdocs.org/files/sha256/f1/51/f1515568d00ae47727b3dbac60b8b585eecdbb24aa95193b496928e2df544e25; text https://openairdocs.org/service-documents/airbus-helicopters/sb-05-96/file/f1515568d00a.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2010-0825; AD 2010-16-51 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md) (issued as Eurocopter)
- Type: Service bulletin (Emergency Alert Service Bulletin)
- Number: 05.96
- Page: https://openairdocs.org/service-documents/airbus-helicopters/sb-05-96

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2010-16-51](https://openairdocs.org/ad/2010-16-51.md), effective Sep 17, 2010: No revision named

## Text (13 pages)

No revision named, the newest copy. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0092, the docket of AD 2021-09-14. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS
HELICOPTERS  EASB
EMERGENCY
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE
ROTORS - MGB oil cooling fan
Checking the clearance between a fan blade and the guide vane bearing housing
ATA: 65
For the attention of
AIRCRAFT  Version(s)
CONCERNED  NUMBER  Civil  Military
SA330  05.96  Ba, L, Jm, S1, Sm
Revision No.  Date of issue
Revision O  2010-07-12
Revision 1  2020-07-24
Summary:
Check for a minimum clearance of 0.2 mm (.008 in.) between a fan blade and the guide vane bearing housing.
This check can be performed using a locally manufactured tool. If the min. clearance is not complied with, replace
the two bearings of the fan rotor shaft.
Reason for last revision:
The purpose of this revision is to:
- make compliance with Service Bulletin No. SA330-65.127 (modification 0776101) mandatory in case of bearing
replacement,
- also mandate compliance with Service Bulletin No. SA330-65.127 for bearing P/N 704A33651114 above
300 Flight Hours (FH),
- send the removed bearings to Airbus Helicopters.
Compliance:
Compliance with this ALERT SERVICE BULLETIN is mandatory.
ASB SA330-05.96
Revision 0 2010-07-12  Page 1/13
Revision 1 2020-07-24  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 2 (OCR)

AIRBUS
HELICOPTERS  EASB
1-  PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
On the Main Gearbox (MGB) fan assembly.
1.A.2. Non-installed equipment or parts
- On MGB fan assembly fitted with bearings P/N 704A33651114 (PRE MOD 0776101).
- On bearings P/N 704A33651114 (PRE MOD 0776101).
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Revision 0:
EUROCOPTER has been informed of a new case of serious deterioration of the MGB oil cooling fan
assembly.
The fan rotor burst, due to its interference with the upper area of the guide vane bearing housing, and some
rotor blades have impacted the MGB compartment environment and caused puncture holes in the
transmission deck. However, the hydraulic pipes and flight controls located nearby were not affected by
impacts.
Such interference is due to the internal degradation of the fan bearings.
After a previous case, EUROCOPTER issued a Service Letter (SL) No. 1912-65-08 on August 12, 2008, to
inform of the modification of the fan maintenance consisting in checking for contact between the fan rotor
and the guide vane bearing during the ALF inspection.
This additional maintenance set forth in this Service Letter and introduced in the documentation, is canceled
when the mandatory check of the clearance, introduced by this ALERT SERVICE BULLETIN, is carried out.
EUROCOPTER renders compliance with the instructions in this ALERT SERVICE BULLETIN mandatory to
enable the early discovery of the potential degradation of the fan rotor bearings, by checking the clearance
between a fan blade and the guide vane bearing.
Revision 0 2010-07-12  Page 2/13
Revision 1 2020-07-24  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 3 (OCR)

AIRBUS
HELICOPTERS  EASB
Revision 1:
The purpose of this revision is to:
- make compliance with Service Bulletin No. SA330-65.127 (modification 0776101) mandatory in case of
bearing replacement,
NOTE
Modification 0776101 consists in replacing the ball bearings
of the fan bearing rotor with bearings with optimized
mechanical characteristics.
- also mandate compliance with Service Bulletin No. SA330-65.127 for bearing P/N 704A33651114 above
300 Flight Hours (FH),
- send the removed bearings to Airbus Helicopters.
1.D. DESCRIPTION
- Check the clearance between a fan blade and the guide vane bearing housing:
. if the min. clearance is not complied with, the two bearings of the fan rotor shaft must be replaced.
- Comply with Service Bulletin No. SA330-65-127 within the indicated compliance time.
- Send the removed bearings to Airbus Helicopters.
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Not applicable.
1.E.2. Compliance in service
Helicopters/installed equipment or parts:
1) On an MGB fan assembly equipped with bearings of all P/Nos. (PRE or POST MOD 0776101):
. comply with paragraph 3. within 10 Flight Hours (FH) following receipt of revision 0 of this ALERT
SERVICE BULLETIN, issued on the date indicated in the page footer,
then,
• comply with paragraph 3. at intervals not exceeding 10 FH.
2) On an MGB fan assembly equipped with bearings P/N 704A33651114 (PRE MOD 0776101):
- Check the Flight Hours (FH) of the bearings on the fan assembly log card:
- For bearings with less than or equal to 200 FH since installation:
. comply with Service Bulletin No. SA330-65.127 at the latest when the bearing reaches 300 FH,
• complete the response form in APPENDIX 4.,
. return the old bearing as per paragraph 2.D.
- For bearings with more than 200FH since installation:
. comply with Service Bulletin No. SA330-65.127 within 100 FH from receipt of revision 1 of this ALERT
SERVICE BULLETIN issued on the date indicated in the page footer,
. complete the response form in APPENDIX 4.,
. return the old bearing as per paragraph 2.D.
Revision 0 2010-07-12  Page 3/13
Revision 1  2020-07-24  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 4 (OCR)

AIRBUS
HELICOPTERS  EASB
Non-installed equipment or parts:
- Comply with Service Bulletin No. SA330-65.127 (replacement of bearings P/N 704A33651114 with new
bearings P/N 704A33651268) at the latest before the installation of the MGB fan assembly
- On receipt of this ALERT SERVICE BULLETIN, discard stocks of bearing P/N 704A33651114.
1.F. APPROVAL
Approval of modifications:
Not applicable.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on July 12, 2010 under the authority of EASA Design Organization Approval No. 21J.056 for civil version
helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on July 12, 2010 under the registered letter Ref. 346621 DGA/DT/CEP/ASA for French government
helicopters.
The technical information contained in Revision 0 of this ALERT SERVICE BULLETIN was approved
on July 12, 2010 by the EUROCOPTER Airworthiness department for export military version helicopters.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved
on July 24, 2020 under the authority of EASA Design Organization Approval No. 21J.700 for civil version
helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved
on July 24, 2020 under the registered letter Ref. 346621 DGA/DT/CEP/ASA for French Government
helicopters
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved
on July 24, 2020 by the Airbus Helicopters Airworthiness Department for export military versions.
1.G. MANPOWER
* For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following staff
qualification:
Qualification: 1 Mechanical Technician.
The Estimated Man-hours are indicated for reference purposes only and based on a standard helicopter
configuration.
Estimated Man-hours: - approximately 2 hours for the first check of the clearance (including the local
production of the tool),
- then, approximately 10 minutes for all the other clearance checks,
- approximately 6 hours to replace the bearings.
1.H. WEIGHT AND BALANCE
Not applicable.
Revision 0 2010-07-12  Page 4/13
Revision 1 2020-07-24  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 5 (OCR)

AIRBUS
HELICOPTERS  EASB
1.I. POWER CONSUMPTION
Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
1.K. REFERENCES
The following documents are required for compliance with this ALERT SERVICE BULLETIN.
Aircraft Maintenance Manual (AMM):
- For helicopters version Sm (UK MoD):
• AMM: 65-00-00, 3-1: General Instructions - Mechanical assemblies - Rotors
. AMM: 65-33-00, 4-2: Removal and installation of fan rotor shaft bearings - Cooling Unit
Maintenance Manual (MAT 8582):
- For helicopters version Ba:
. MAT 8582: 320A: Transmission au rotor principal - Consignes générales
. MAT 8582: 321PA: Transmission au rotor principal - Dépose - pose des roulements de l'arbre rotor du
ventilateur
Maintenance Manual (MDE):
- For helicopters versions J, Jm, L, S1, Sm:
. MDE: 65.00.301: Rotors - General mechanical instructions
. MDE: 65.33.402: Main Gearbox - Cooling unit - Removal and Installation of the fan rotor shaft bearings
1.L. OTHER AFFECTED PUBLICATIONS
Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Interchangeability:
PRE MOD and POST MOD 0776101 bearings are not interchangeable.
Mixability:
Mixing between PRE MOD and POST MOD 0776101 bearings is prohibited.
Revision 0 2010-07-12  Page 5/13
Revision 1 2020-07-24  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 6 (OCR)

AIRBUS
HELICOPTERS  EASB
2.  EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Price:
For any information concerning the cost of the kits and/or components for the modifications, for the tools, or
for assistance, contact the Airbus Helicopters Network Sales and Customer Service Department.
Availability:
Delivery lead times will be indicated by the Sales and Customer Relations Department on the operator's
request.
Procurement:
Order the required quantity from the Airbus Helicopters Network Sales and Customer Relations Department:
Airbus Helicopters
Etablissement de Marignane
Direction Ventes et Relations Client
13725 MARIGNANE CEDEX
France
NOTE 1
On the purchase order, please specify the mode of
transport, the destination and the serial numbers of the
helicopters to modify.
NOTE 2
For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F.
Fax: +33 (0)4 42 85 99 96.
2.B. LOGISTIC INFORMATION
Airbus Helicopters remains at your disposal for any further information or support you may require to
comply with the instructions given in this ALERT SERVICE BULLETIN; please contact the Airbus
Helicopters Support & Services Department.
+33 (0)4.42.85.20 51
E-mail: support.technical-dyncomp.ah@airbus.com
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Kits or components to be ordered for one helicopter or one assembly:
Old
Designation  Qty  New P/N  Item
P/N  →  Instruction
594918  594918  Return as per
Bearing  2  (704A33651268)  1  (704A33651268)  paragraph 2.D.
Revision 0 2010-07-12  Page 6/13
Revision 1 2020-07-24  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 7 (OCR)

AIRBUS
HELICOPTERS  EASB
Consumables to be ordered separately:
As per the Work Cards and Tasks indicated in this ALERT SERVICE BULLETIN.
The consumables can be ordered separately from the following companies.
Aviatec global aviation
Website: https://www.aviatec.net
Telephone: +33 1.34.46.45.24 or +49 4193.8803.630
Fax: +33 1.34.46.45.26 or +49 4193.8803.699
AOG: +49 4193.8803.660
AOG email: aog@aviatec.aero
BDSI
Website: https://www.boeingdistribution.com
Telephone: +1.305.925.2600
Fax: +1.305.507.7191
AOG: +1.305.471.8888
AOG email: AOGdesk@Boeingdistribution.com
Gaches chimie
Website: https://www.gaches.com
Telephone: +33 5.61.31.64.45
Fax: +33 5.61.40.98.63
AOG email: marketplace@gaches.com
Special tools:
Refer to the Work Cards and Tasks referenced in this ALERT SERVICE BULLETIN.
2.D. EQUIPMENT OR PARTS TO BE RETURNED
- Place the bearings in two separate identified bags (one for the front bearing, one for the rear bearing).
- Place the two bags in a package.
- Enclose a completed copy of the Appendix 4 and a copy of the Log Card of the MGB fan assembly.
- Send the package to the following address:
Airbus Helicopters
Aéroport Marseille Provence
RETEX Factory - roulements ventilateur BTP
MAH09MGA2 - B1 - LES BORIES
SOUS SOL - ARRIVEE
13725 Marignane CEDEX
FRANCE
Add a label (format A4) on the package, which specifies:
UNSERVICEABLE FOR EXPERTISE
-ESETM-
Recipient: RETEX FACTORY
Contact: support.technical-dyncomp.ah@airbus.com
Revision 0 2010-07-12  Page 7/13
Revision 1 2020-07-24  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 8 (OCR)

AIRBUS
HELICOPTERS  EASB
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- As per Work Card 65.00.301 (MDE) or Work Card 320A (MAT 8582) or Task 65-00-00, 3-1 (AMM), read
and comply with the general instructions on rotors.
3.B. WORK STEPS
3.B. 1. Preliminary steps
- Install access equipment.
- Open the sliding cowling.
3.B.2. Procedure
As per Figures 1 and 2
- Using a 0.2 mm (0.008 in.) feeler gauge attached to a locally manufactured rigid rod, check for a minimum
clearance of 0.2 mm (0.008 in.) between a fan rotor blade (a) and the upper section of the guide vane
bearing housing (b):
• Insert the tool through the fan grid (c) to check the clearance at the bottom of the guide vane bearing
between a blade (a) and the upper section of the guide vane bearing housing (b).
NOTE 1
Clearance must be checked over the entire width of a fan
In order to be inserted through the fan grid, the rigid rod
equipped with the feeler gauge, must have a maximum width
of 12 mm (.472 in.), and its length must be equal to 150 mm
(5.905 in.) minimum.
Interpretation of the results:
If the feeler gauge can be inserted between the blade and the housing (clearance greater than or
equal to 0.2 mm (.008 in.)):
- Leave as is.
- Return the helicopter to flight configuration in accordance with paragraph 3.B.3.
Revision 0 2010-07-12  Page 8/13
Revision 1 2020-07-24  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 9 (OCR)

AIRBUS
HELICOPTERS  EASB
b)  If the feeler gauge cannot be inserted between the blade and the housing (clearance less
than0.2 mm (.008 in.)):
- For bearing P/N 704A33651114 (PRE MOD 0776101):
. comply with Service Bulletin No. SA330-65.127,
. complete the response form in APPENDIX 4.,
. return the old bearings as per paragraph 2.D.,
. return the helicopter to flight configuration in accordance with paragraph 3.B.3.
- For bearing P/N 704A33651268 (POST MOD 0776101):
. as per Figure 3:
.. remove the two bearings (d) of the fan rotor shaft as per MDE Work Card 65.33.402 or MAT8582
Work Card 321PA or AMM Task 65-33-00, 4-2,
.. install the two new bearings (1) as per MDE Work Card 65.33.402 or MAT8582 Work Card 321PA or
AMM Task 65-33-00, 4-2,
. complete the response form in APPENDIX 4.,
return the old bearings as per paragraph 2.D.,
.. return the helicopter to flight configuration in accordance with paragraph 3.B.3.
3.B.3. Final steps
- Close the sliding cowling.
- Remove the access equipment.
- Resume flights.
3.C. RECORD OF COMPLIANCE
Compliance with this document:
Record first compliance with this ALERT SERVICE BULLETIN, with the revision number, in the Log Card of
the fan assembly.
- Please confirm compliance with this ALERT SERVICE BULLETIN:
QR-Code or hypertext link
NOTE 2
The recording of compliance with ALERT SERVICE
BULLETINS in the R-Tex tool does not replace the recording
in the helicopter documents.
ASB SA330-05.96
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Revision 0  2010-07-12  Page 9/13
Revision 1  2020-07-24  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 10 (OCR)

AIRBUS
HELICOPTERS  EASB
Area to be
monitored  Area to be
monitored
DETAIL A
FWD  Min. clearance of 0.2 mm (.008 in.)
over the entire width of the blade
a
Figure 1
Revision 0  2010-07-12  Page 10/13
Revision 1  2020-07-24  This document is available on the internet: www  shelicopters.com/techpub

### Page 11 (OCR)

AIRBUS
HELICOPTERS  EASB
- Guide vane bearing housing
_c
Min. clearance of 0.2 mm (.008 in.)
over the entire width of the blade
Figure 2
Revision 0  2010-07-12  Page 11/13
Revision 1  2020-07-24  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 12 (OCR)

AIRBUS
HELICOPTERS  EASB
Front bearing
-WD
Rear bearing
Figure 3
Revision O  2010-07-12  Page 12/13
Revision 1 2020-07-24  This document is available on the internet: www.airbushelicopters.com/techpub

### Page 13 (OCR)

AIRBUS
HELICOPTERS  EASB
4.  APPENDIX
ALERT SERVICE BULLETIN No 05.96 Response Form
iChecking the clearance between a fan blade and the guide vane bearing
housing"
Complete the form and send it by e-mail to:
Airbus Helicopters - Etablissement de Marignane
Customer Support
E-mail: support.technical-dyncomp.ah@airbus.com
Operator Name and Address:
Aircraft Type and Version:  S/N of the helicopter:
Flight hours (FH):  Mission type: _
Complete tables below:
Designation  P/N  S/N  FH since new (TSN)
MGB fan assembly
Designation  P/N  S/N  Rear / Front  Position(*):  FH since new  (TSN)  Reason of removal
- Clearance < 0.2 mm (0.008 in.)
Bearing
- Periodic replacement
- Clearance < 0.2 mm (0.008 in.)
Bearing
- Periodic replacement
(*) the front bearing is on the belt side and the rear bearing is on the blade side.
Attach a copy of the Log Card (FM) of the MGB fan assembly
Please make a copy of this page. The original form must remain in the ALERT SERVICE BULLETIN.
Revision 0 2010-07-12  Page 13/13
Revision 1 2020-07-24  This document is available on the internet: www.airbushelicopters.com/techpub

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
