# Eurocopter Service Bulletin 65.137

Copy: Airbus Helicopters ASB SA330-65.137 Rev 0 ("Airbus Helicopters ASB SA330-65.137 Rev 0"), 14 pages: PDF https://openairdocs.org/files/sha256/48/2e/482efa1f57d24fe9adc27b116ccbf2bb5700999ae4c5b5368960b98fdd2fef3e; text https://openairdocs.org/service-documents/airbus-helicopters/sb-65-137/file/482efa1f57d2.md. Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2024-2552, the docket of AD 2025-08-06. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus Helicopters](https://openairdocs.org/service-documents/airbus-helicopters.md) (issued as Eurocopter)
- Type: Service bulletin (Service Bulletin)
- Number: 65.137
- Latest revision known: 65.137, Revision R1, dated November 17, 1993 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus-helicopters/sb-65-137

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2001-04-13](https://openairdocs.org/ad/2001-04-13.md), effective Apr 16, 2001: Revision R1

## Text (14 pages)

Rights: © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2024-2552, the docket of AD 2025-08-06. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS  HELICOPTERS
No. SA330-65.137
Civil version(s): J
Military version(s): Ba, Jm, L, S1, Sm
ALERT SERVICE BULLETIN
CORRECTIVE MEASURE
ROTORS - Oil cooling
Increased reliability of the fan-bearing assembly
and the flexible duct
Related to modifications 0725373, 0776102 and 0776104
For the attention of
Revision No.  Date of issue
Revision 0  2022-07-25
Summary:
The objective of this ALERT SERVICE BULLETIN is to upgrade the fan-bearing assembly. This upgrade makes the
fan-bearing rectifier stronger. You can only do this at a D-level maintenance center that is specially approved and
has the correct equipment to do this upgrade. When you receive the upgraded fan-bearing assembly, you must
install a flexible duct which is compatible with the upgraded fan-bearing assembly.
Compliance:
It is mandatory to comply with this ALERT SERVICE BULLETIN.
Revision 0 2022-07-25  Page 1/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 2 (OCR)

AIRBUS  HELICOPTERS
No. SA330-65.137
1. PLANNING INFORMATION
CAUTION
MAKE  SURE THAT THE MODIFICATIONS
RELATED TO THIS ALERT SERVICE BULLETIN
AGREE WITH THE HELICOPTER CONFIGURATION
AT THIS TIME. IF THE MODIFICATIONS DO NOT
AGREE WITH THE HELICOPTER CONFIGURATION:
- PREPARE THE NECESSARY ADAPTATION
- GET THE APPROVAL BY THE APPLICABLE
LOCAL AIR TRANSPORT AUTHORITIES.
- COMPLY  AIRWORTHINESS
REQUIREMENTS.
THIS ALERT SERVICE BULLETIN IS WRITTEN FOR
THE INITIAL HELICOPTER CONFIGURATION
SPECIFIED IN THE INDIVIDUAL INSPECTION LOG
BOOK. IT INCLUDES ONLY THE POST-DELIVERY
CONFIGURATION CHANGES THAT ARE KNOWN
AND APPROVED BY AIRBUS HELICOPTERS.
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
Helicopters installed with the components that follow:
- Flexible duct manufacturer part number (MP/N): 330A39-2148-00
- Fan-bearing assembly with one of the MP/N that follow:
• 330A34-1190-04
• 330A34-1190-05
330A34-1190-06
• 330A34-1190-07.
NOTE 1
You can identify the equipment from its Log Card (FM).
NOTE 2
You can also upgrade the fan-bearing assemblies with
the MP/N: 330A34-1190-00/-01/-02/-03. To do so, you first
upgrade them with modification 0776101 through Service
Bulletin No. 65.127. After the compliance with Service
Bulletin No. 65.127,  the MP/N of these  fan-bearing
assemblies become 330A34-1190-04/-05/-06/-07.
1.A.2. Non-installed equipment or parts
Equipment shown in paragraph 1.A.1.
Revision 0 2022-07-25  Page 2/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 3 (OCR)

AIRBUS  HELICOPTERS
No. SA330-65.137
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Airbus Helicopters got to know some incidents of rupture of bearings and fan blades of the fan-bearing
assembly. The Kevlar protection on the fan-bearing rectifier could not contain all the debris from this rupture.
Thus, Airbus Helicopters introduces modification 0776102 on the SA330 helicopter family through this
ALERT SERVICE BULLETIN. In this modification, the initial PRE MOD Kevlar protection is removed. Then,
the fan-bearing rectifier is made stronger with new layers of Kevlar protection.
Fan-bearing rectifier with
Kevlar protection removed
15 Layer
2" Layer
Fan-bearing rectifier
POST MOD 0776102
Kevlar protection
The modification 0776102 is integrated at a D-level maintenance center that is specially approved and has
the correct equipment to do this upgrade. During this upgrade, the approved D-level maintenance center will
systematically integrate modification 0725373 for PRE MOD 0725373 fan-bearing assemblies. The
modification 0725373 installs an accelerometer support on the fan-bearing rectifier.
Conjointly, Airbus Helicopters introduces modification 0776104 which installs a new flexible duct. Only this
flexible duct is compatible with the POST MOD 0776102 fan-bearing assembly and can contain ejected
debris better.
The objective of this ALERT SERVICE BULLETIN is to install POST MOD 0776104 flexible duct and
upgrade the fan-bearing assembly with modification 0776102, and if applicable, modification 0725373.
Revision 0 2022-07-25  Page 3/14
This document is available on the Internet: www.airbu  elicopters.com/techpub/

### Page 4 (OCR)

AIRBUS  HELICOPTERS
No. SA330-65.137
1.D. DESCRIPTION
This ALERT SERVICE BULLETIN includes the work steps that follow:
- The removal of the flexible duct
- The removal of the fan-bearing assembly
- The shipment of the fan-bearing assembly to an approved D-level maintenance center to integrate the
modification 0776102, and where applicable, the modification 0725373
- The installation of the fan-bearing assembly after the modification at the approved D-level maintenance
- The installation of the new flexible duct to integrate the modification 0776104.
NOTE 3
The modification 0725373 is only applicable to fan-bearing
assemblies with MP/N: 330A34-1190-04 or 330A34-1190-
06. Fan-bearing assemblies with MP/N: 330A34-1190-05
and 330A34-1190-07 are POST MOD 0725373.
NOTE 4
Airbus Helicopters will introduce  modification 0776103
through Service Bulletin No. 65.136. This modification
increases the reliability of the attachment points between the
fan grid and the rectifier of the fan-bearing assembly. Same
as the modification 0776102, this modification 0776103 is
integrated at an approved D-level maintenance center. If you
comply with the Service Bulletin No. 65.136 and this ALERT
SERVICE BULLETIN at the same time, you get the two
compliances with only one shipment.
NOTE 5
The Service Bulletin No. 65.136 is not available at the date
of issue of this ALERT SERVICE BULLETIN. Airbus
Helicopters will make the Service Bulletin No. 65.136
available.
NOTE 6
After the integration of modification 0776102 through this
ALERT SERVICE BULLETIN, the upgraded fan-bearing
assembly has a new MP/N as identification:
- 330A34-1190-08 (for PRE MOD 0775028 assemblies)
- 330A34-1190-09 (for POST MOD 0775028 assemblies).
NOTE 7
Modification 0775028 installs a microswitch on each belt
tensioner to give cockpit indication if the belt is broken.
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Not applicable.
Revision 0 2022-07-25  Page 4/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 5 (OCR)

AIRBUS  HELICOPTERS
No. SA330-65.137
1.E.2. Compliance in service
It is the approved D-level maintenance center who does the modification of fan-bearing assembly.
It is the operator who does the removal and installation of the fan-bearing assembly and the flexible duct on
the helicopter.
Helicopters/installed equipment or parts:
Comply with paragraph 3. before January 1, 2026.
Non-installed equipment or parts:
You must not install the equipment given in paragraph 1.A.2. on helicopters after December 31, 2025.
1.F. APPROVAL
Approval of modifications:
The information or instructions relate to modification 0725373 edition 2, which was approved
on April 13, 2012 under the authority of EASA Design Organization Approval No. 21J.056 for civil version
helicopters subject to an Airworthiness Certificate.
The information or instructions relate to modification 0725373 edition 2, which was approved
on April 13, 2012 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French
Government helicopters.
The information or instructions relate to modification 0725373 edition 2, which was approved
on April 13, 2012 by the Airbus Helicopters Airworthiness Department for export military versions.
The information or instructions relate to modification 0776102, which was approved through
CRD 330A 07-76102C Revision C on July 08, 2021 under the authority of EASA Design Organization
Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.
The information or instructions relate to modification 0776102, which was approved through
CRD 330A 07-76102M Revision B on July 08, 2021 under the prerogatives of the recognition of design
capability FRA21J-002-DGA for French Government helicopters.
The information or instructions relate to modification 0776102, which was approved througn
CRD 330А 07-76102M Revision B on July 08, 2021 by the Airbus Helicopters Airworthiness Department for
export military versions (but this is not applicable to helicopter version Sm-LEP).
The information or instructions relate to modification 0776104, which was approved through
CRD 330A 07-76104C Revision B on November 08, 2019 by EASA for civil version helicopters subject to an
Airworthiness Certificate.
The information or instructions relate to modification 0776104, which was approved through
CRD 330A 07-76104M Revision A on November 20, 2019 under the prerogatives of the recognition of
design capability FRA21J-002-DGA for French Government helicopters.
The information or instructions relate to modification 0776104, which was approved through
CRD 330A 07-76104M Revision A on November 20, 2019 by the Airbus Helicopters Airworthiness
Department for export military versions (but this is not applicable to helicopter version Sm-LEP).
Revision 0 2022-07-25  Page 5/14
This document is available on the Internet: www. airbu  elicopters.com/techpub/

### Page 6 (OCR)

AIRBUS  HELICOPTERS
No. SA330-65.137
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision O was approved
on July 22, 2022 under the authority of EASA Design Organization Approval No. 21J.700 for helicopters of
civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on July 22, 2022 under the authority of the recognition of design capability FRA21J-002-DGA for French
Government helicopters.
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved
on July 22, 2022 by the Airbus Helicopters Airworthiness Department for export military versions.
1.G. MANPOWER
* Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this
qualification:
Qualification:  1 Mechanical Technician.
The man-hours are an estimate given for information only and for a standard helicopter configuration.
Estimated Man-hours: 9 hours for the Mechanical Technician.
The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.
The estimate of the helicopter downtime is one and a half day (this does not include the time taken for the
modification of the fan-bearing assembly at the approved D-level maintenance center).
1.H. WEIGHT AND BALANCE
Helicopters installed with PRE MOD 0725373 fan-bearing assemblies before the compliance with this
ALERT SERVICE BULLETIN:
Weight:  +1.268 kg
Longitudinal moment:  +7.924 m.kg
Helicopters installed with POST MOD 0725373 fan-bearing assemblies before the compliance with this
ALERT SERVICE BULLETIN:
Weight:  +1.250 kg
Longitudinal moment:  +7.814 m.kg
After you complete the work, record the new weight and moment in your applicable document.
1.I. POWER CONSUMPTION
This ALERT SERVICE BULLETIN has no effect on the electrical load analysis.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
Revision 0 2022-07-25  Page 6/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 7 (OCR)

AIRBUS  HELICOPTERS
No. SA330-65.137
1.K. REFERENCES
All helicopters
SIM: In effect
SB: 65.127:  New bearings of the fan bearing rotor
These documents are necessary to comply with this ALERT SERVICE BULLETIN:
Helicopter version Ba
MAT8582: 320A:  Main gear box - General instructions
MAT8582: 321PM:  Main Rotor Transmission - Removal - Installation of the flexible duct
MAT8582: 341E:  Horizontal Drive Shaft - Removal - Installation of the "fan bearing-intermediate shaft"
assembly
Helicopter versions L, J, Jm, S1 and Sm
MDE: 65-00-301:  Rotors - General instructions
MDE: 65-33-410:  Cooling Unit - Removal-installation of the flexible duct
MDE: 65-41-404:  Horizontal Drive Shaft - Removal and installation of the "fan bearing -
intermediate shaft" assembly
All helicopter versions
IN: 2832-1-00:  Procedure for returning parts to Airbus Helicopters for overhaul/repair/technical
investigation/core unit return
IN: 3481-1-00:  The Marketplace: an AirbusWorld Ordering service
IN: 3785-1-00:  Introduction of the digital Service Bulletin reporting service SB Insight
SPN: 3703-P-00:  Foreign Object Damage prevention
MTC: 20-07-01-201:  Handling of helicopters in a hangar and in a prepared area - Handling
MTC: 20-07-02-212:  Recommendations for working at height - Human factors approach - Safety
instructions
MTC: 20-07-02-201:  Helicopter parked in a repair shop - Safety instructions
MTC: 20-07-03-408:  Appearance checks on an aircraft after an inspection or repair
MTC: 20-08-05-101:  Drafting and updating the log card (FM) - General rules applicable to aircraft
MTC: 20-08-05-102:  Rules in force applicable for repair and maintenance of aircraft - General rules
applicable to aircraft
MTC: 20-08-05-107:  Recommendations for technical requests - General rules applicable to aircraft
MTC: 20-09-02-901:  Preservation and packing methods of airborne equipment - Preservation
Revision 0 2022-07-25  Page 7/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 8 (OCR)

AIRBUS  HELICOPTERS
No. SA330-65.137
1.L. OTHER AFFECTED PUBLICATIONS
CAUTION
COMPLY WITH THIS ALERT SERVICE
BULLETIN, THE OPERATOR MUST MAKE SURE
THAT ALL THE MAINTENANCE DOCUMENTS
NECESSARY FOR THE MAINTENANCE OF THIS
INSTALLATION ARE AVAILABLE. IF THEY ARE
AVAILABLE, THE OPERATOR MUST
CONTACT AIRBUS HELICOPTERS TO GET THESE
DOCUMENTS.
Publications already updated:
The manuals shown below are updated with the modifications 0725373, 0776102 and 0776104:
- Maintenance Manual (MDE / MAT8582)
- Master Servicing Recommendations (PRE)
- Airworthiness Limitations (PRE 5.99)
- Index of Modifications (SIM).
The Illustrated Parts Catalog (IPC) is updated with the modification 0725373.
You will receive the documents to which you subscribe.
Publications to be updated:
Airbus Helicopters will update the Illustrated Parts Catalog (IPC) in relation to the modifications 0776102 and
0776104.
You will receive the documents to which you subscribe.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
Interchangeability:
PRE MOD and POST MOD components are not interchangeable.
Mixability:
You must not use PRE MOD and POST MOD components together.
Revision 0 2022-07-25  Page 8/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 9 (OCR)

AIRBUS  HELICOPTERS
No. SA330-65.137
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Price
For information about the price of the modification kits and/or components, or for aid, contact the Airbus
Helicopters Network Sales and Customer Relations Department.
Availability
Contact the Sales and Customer Relations Department to know the delivery lead times.
Procurement
Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations
Department:
Airbus Helicopters
Etablissement de Marignane
Direction Ventes et Relations Client
13725 MARIGNANE CEDEX
FRANCE
In the purchase order, write the information that follows:
- The mode of transport
- The destination
- The serial numbers of the helicopters to change.
2.B. LOGISTIC INFORMATION
Not applicable.
Revision 0 2022-07-25  Page 9/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 10 (OCR)

AIRBUS  HELICOPTERS
No. SA330-65.137
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Kits to be ordered for one helicopter or one assembly:
New  Old
Key Word  Qty  Item
P/N  P/N  →  Instruction
Flexible duct  1  330A39-2168-00  1  330A39-2148-00  Put into storage
Equipment or parts to be ordered separately:
Refer to the Work Cards used in this ALERT SERVICE BULLETIN.
Consumables to be ordered separately:
Refer to the Work Cards used in this ALERT SERVICE BULLETIN.
You can send an order for the consumables from the AirbusWorld Marketplace through e-ordering
(IN 3481-1-00). If you cannot get access to e-ordering, please contact your Logistic Focal Point.
Special tools:
Refer to the Work Cards used in this ALERT SERVICE BULLETIN.
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Use the procedure given in Information Notice (IN) No. 2832-1-00 to send the fan-bearing assembly back.
Revision 0 2022-07-25  Page 10/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 11 (OCR)

AIRBUS  HELICOPTERS
No. SA330-65.137
3. ACCOMPLISHMENT INSTRUCTIONS
3.А. GENERAL
- Comply with the instructions to move helicopters in a hangar and in a prepared area. Refer to
Work Card 20-07-01-201 (MTC).
- Comply with the safety instructions for helicopters parked in a repair shop. Refer to Work
Card 20-07-02-201 (MTC).
- Comply with the recommendations when you work at height. Refer to Work Card 20-07-02-212 (MTC).
- Comply with the rules in force applicable for repair and maintenance of aircraft. Refer to Work
Card 20-08-05-102 (MTC).
- Comply with the recommendations for technical requests. Refer to Work Card 20-08-05-107 (MTC).
- Comply with the general instructions on rotors. Refer to Work Card 65-00-301 (MDE) or Work
Card 320A (MAT8582) applicable to your helicopter version.
3.B. WORK STEPS
In the procedures that follow, refer to the Work Cards (MDE) or the Work Cards (MAT8582) applicable to
your helicopter version.
CAUTION
MAKE SURE THAT YOU PREVENT ALL POSSIBLE
FOREIGN OBJECT DAMAGE (FOD). REFER TO
SAFETY PROMOTION NOTICE (SPN) NO. 3703-P-
00.
3.B.1. Preliminary steps
- Park the helicopter in a maintenance hangar.
- Disconnect all electrical power sources.
- Install the applicable access means.
- Remove and/or open all applicable cowlings, panels, doors and other items of equipment to get access to
the different work areas.
3.B.2. Procedure
3.B.2.a. Removal of PRE MOD fan-bearing assembly (Figure 1, DETAIL A)
- Remove the fan-bearing assembly (a). Refer to Work Card 65-41-404 (MDE) or Work
Card 341E (MAT8582).
- Remove the flexible duct (b). Refer to Work Card 65-33-410 (MDE) or Work Card 321PM (MAT8582).
- Put the flexible duct (b) into storage. Refer to Work Card 20-09-02-901 (MTC).
- Send the fan-bearing assembly (a) to an approved D-level maintenance center to integrate the
modification 0776102 and where applicable, modification 0725373. Refer to paragraph 2.D.
NOTE 1
Fan-bearing assemblies with MP/N: 330A34-1190-05 or
330A34-1190-07 are POST MOD 0725373.
Revision 0 2022-07-25  Page 11/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 12 (OCR)

AIRBUS  HELICOPTERS
No. SA330-65.137
3.B.2.b. Installation of POST MOD fan-bearing assembly (Figure 1, DETAIL A)
- When you receive the fan-bearing assembly (a), read its new Log Card (FM) and make sure that its MP/N
is given in the list below:
. 330A34-1190-08
• 330A34-1190-09.
NOTE 2
If you integrate this modification 0776102 (through this
ALERT SERVICE BULLETIN) and the modification 0776103
(through Service Bulletin No. 65.136) at the same time, the
fan-bearing assembly will have one of the MP/N given
below:
- 330A34-1190-10
- 330A34-1190-11.
NOTE 3
You can install a fan-bearing assembly with one of the MP/N
given above (330A34-1190-08/-09/-10/-11) to complete the
work steps of this ALERT SERVICE BULLETIN.
- Install the fan-bearing assembly (a). Refer to Work Card 65-41-404 (MDE) or Work
Card 341E (MAT8582).
- Install the flexible duct (1). Refer to Work Card 65-33-410 (MDE) or Work Card 321PM (MAT8582).
3.B.3. Final steps
- Remove all the tools, the materials and the equipment from your work area.
- Clean the work area and the helicopter. Refer to Work Card 20-07-03-408 (MTC).
- Install or close all cowlings, panels, doors and items of equipment that you removed and/or opened during
the preliminary steps (paragraph 3.B.1 of this ALERT SERVICE BULLETIN).
- Remove the access means.
- Connect all the electrical power sources.
- Set the helicopter to flight condition.
3.C. RECORD OF COMPLIANCE
Compliance with this document:
- Record the full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the
helicopter documents.
- Record the full compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):
QR code or hypertext link
NOTE 4
The recording of compliance with ALERT SERVICE
BULLETINS in the SB Insight tool does not replace the
recording in the helicopter documents.
ASB SA330 65.137
Revision 0 2022-07-25  Page 12/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 13 (OCR)

AIRBUS  HELICOPTERS
No. SA330-65.137
Tracking of modifications in the documentation:
Record the full integration of modifications 0776102 and 0776104, and where applicable, 0725373, in the
Aircraft Log Book.
Record the removal of the fan-bearing assembly (PRE MOD 0776102) in its Log Card (FM). Refer to Work
Card 20-08-05-101 (MTC).
Record the installation of the fan-bearing assembly (POST MOD 0776102) in its Log Card (FM). Refer to
Work Card 20-08-05-101 (MTC).
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Operating instructions:
Not applicable.
Maintenance instructions:
For helicopter version J:
- Refer to Airworthiness Limitations (PRE 5.99) Rush Revision 7a.
- Refer to Master Servicing Recommendations (PRE) Rush Revision 26a.
For helicopter version Ba, refer to Master Servicing Recommendations (PRE) Rush Revision 48a.
For helicopter version Ba (GUC), refer to Master Servicing Recommendations (PRE) Rush Revision 3a.
For helicopter version Jm, refer to Master Servicing Recommendations (PRE) Rush Revision 20a.
For helicopter version L, refer to Master Servicing Recommendations (PRE) Rush Revision 27a.
For helicopter versions S1, refer to Master Servicing Recommendations (PRE) Rush Revision 23a.
For helicopter version Sm, refer to Master Servicing Recommendations (PRE) Rush Revision 19a.
Refer to the manuals given above when they are published.
For helicopter versions J, Jm, L, S1 and Sm, refer to Maintenance Manual (MDE) Normal Revision 69.
For helicopter version Ba, refer to Maintenance Manual (MAT8582) Normal Revision 47.
When there is a newer revision, refer to the newer revision of the applicable manual.
Revision 0 2022-07-25  Page 13/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

### Page 14 (OCR)

AIRBUS  HELICOPTERS
No. SA330-65.137
JA
Back to paragraph 3.B.2.a.
Back to paragraph 3.B.2.b.
Figure 1
Revision 0 2022-07-25  Page 14/14
This document is available on the Internet: www.airbushelicopters.com/techpub/

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
