# Airbus Service Bulletin 53-P069-00

Copy: No revision named ("SB 53-P069-00"), 113 pages: PDF https://openairdocs.org/files/sha256/eb/f6/ebf64cb9a881377db6f18e7222658446f9a5d7f7ad8224415f769ca2efaed7e5; text https://openairdocs.org/service-documents/airbus/53-p069-00/file/ebf64cb9a881.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2022-1164, the docket of AD 2022-20-02. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: 53-P069-00
- Page: https://openairdocs.org/service-documents/airbus/53-p069-00

## Text (113 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2022-1164, the docket of AD 2022-20-02. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 1
CONF ALL
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
 
The content of this document is the property of Airbus. All rights including copyrights are reserved.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
MANDATORY MANDATORY MANDATORY
ATA SYSTEM: 53
TITLE: FUSELAGE - FAIRINGS - MODIFICATION OF RAT DOOR AND BELLY
FAIRING PANELS TO INCREASE CLEARANCE BETWEEN RAT DOOR AND
RAT BLADE
MODIFICATION No.:
114656L83719
CONF 001
116001L83738

### Page 2

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jun 28/21 A350-53-P069
Page 2
ATA SYSTEM: 53
TITLE: FUSELAGE - FAIRINGS - MODIFICATION OF RAT DOOR AND BELLY
FAIRING PANELS TO INCREASE CLEARANCE BETWEEN RAT DOOR AND
RAT BLADE
CONF ALL
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
CONF 001
MODIFICATION CLASSIFICATION
MAJOR 114656L83719
MINOR 116001L83738
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
NOTE: This modification is related to an airworthiness issue and has been re-classified and
confirmed by EASA as minor in accordance with EU Part 21.A.91. As such, this is
handled by Airbus under the Design Organisation Approval ref. EASA.21J.031.
CONF 002
MODIFICATION CLASSIFICATION
MAJOR 114656L83719
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF ALL
B. REASON
(1) History
A potential clash between RAT blade tip and Belly Fairing (BF) RAT inboard door at
10.5º angle RAT deployment, has been identified in FAL during RAT ground extension.
During the acceptance flight, no contact during RAT deployment has occurred.
However, the acceptance flight does not cover all the flight envelope conditions.
Investigation revealed that a clash with the BF inboard door cannot be excluded for
the entire flight envelope.
(2) Objective/Action
The objective of this Service Bulletin is to install a new BF inboard RAT door and BF
adjacent panels. The new design solution for RAT door and panels will prevent any
potential clash during RAT deployment.
This SB provides instructions to implement MOD No. 114656L83719 and MOD No.
116001L83738, which consists of replacing the RAT door and BF panels 198HS, 198ES
and 198FS. For those A/C that have already incorporated MOD No. 116001L83738,

### Page 3

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jun 28/21 A350-53-P069
Page 3
the SB provides instructions to implement MOD No. 114656L83719, which consist of
replacing RAT door and BF panels 198ES and 198FS.
(3) Advantages
The accomplishment of this SB will increase the clearance between the inboard RAT
door and the RAT blades to prevent any potential clash during RAT deployment.
(4) Operational/Maintenance Consequences
NONE
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO
A/C OPERATION
AFFECTED
NO VENDOR SB NO
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD YES
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
NOTE: Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION
CONF 001
No specific aircraft maintenance configuration required.
CONF 002
No specific aircraft maintenance configuration required.
CONF ALL
E. MATERIAL PRICE INFORMATION
CONF 001
(1) Modification
(a) T ask set A350-A-53-XX-P069-01000-93AA-A Modification
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Part kit 53P069C01R04 1 160500.00 USD Panels, RAT Door, Spacers,
Damper
CONF 002
(1) Modification
(a) T ask set A350-A-53-XX-P069-01000-93AA-A Modification
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Part kit 53P069C04R01 1 150500.00 USD Panels, RAT Door, Spacers,
Damper

### Page 4

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jun 28/21 A350-53-P069
Page 4
CONF ALL
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
BAW CPA ETD FWI QTR VIR
NOTE: MOD No. 114656L83719 is embodied before delivery on A350–1000 aircraft with
Manufacturer Serial Number (MSN) 00409, 00430, 00438–00444, 00450–00477,
00486–00495, 00503–00509, 00533 and subsequent.
G. CONCURRENT REQUIREMENTS
None
H. NATURE OF THE WORK
CONF 001
(1) Modification
(a) T ask set A350-A-53-XX-P069-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT NO
CONF 002
(1) Modification
(a) T ask set A350-A-53-XX-P069-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT NO
CONF ALL
I. MANPOWER
CONF 001
(1) Modification
(a) T ask set A350-A-53-XX-P069-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 25.00 h
ELAPSED TIME (HOURS) 25.00 h
CONF 002
(1) Modification
(a) T ask set A350-A-53-XX-P069-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 19.50 h
ELAPSED TIME (HOURS) 19.50 h

### Page 5

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-53XXP069-A-FAPE3-05Z0C-A-003-01 Fig.SA Sol.AA SHEET 1/1
REV 00 Jun 28/21 A350-53-P069Summary
Page 5
CONF ALL
J. GENERAL OVERVIEW
CONF 001
A
Z190
Z198
A
B
198ES
FR69 FR68
B
198PR
198FS
198HS
REPLACE PANEL
REPLACE PANEL
REPLACE DOOR ASSY
REPLACE PANEL
ICN-A350-A-53XXP069-A-FAPE3-05Z0C-A-003-01

### Page 6

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-53XXP069-A-FAPE3-05Z0B-A-003-01 Fig.SA Sol.AB SHEET 1/1
REV 00 Jun 28/21 A350-53-P069Summary
Page 6
CONF 002
A
Z190
Z198
A
B
198ES
FR69 FR68
B
198PR
198FSREPLACE PANEL
REPLACE PANEL
REPLACE DOOR ASSY
ICN-A350-A-53XXP069-A-FAPE3-05Z0B-A-003-01

### Page 7

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 7
ATA SYSTEM: 53
TITLE: FUSELAGE - FAIRINGS - MODIFICATION OF RAT DOOR AND BELLY
FAIRING PANELS TO INCREASE CLEARANCE BETWEEN RAT DOOR AND
RAT BLADE
CONF ALL
1. PLANNING INFORMATION
A. APPLICABILITY
NOTE: MOD No. 114656L83719 is embodied before delivery on A350–1000 aircraft with
Manufacturer Serial Number (MSN) 00409, 00430, 00438–00444, 00450–00477,
00486–00495, 00503–00509, 00533 and subsequent.
NOTE: MOD No. 116001L83738 is embodied before delivery on A350–1000 aircraft with
Manufacturer Serial Number (MSN) 00399 and subsequent.
(1) Models
ON A/C 0065, 0071, 0088, 0102, 0110, 0118, 0125, 0141, 0161, 0169, 0188, 0206, 0215,
0225, 0229, 0233, 0241, 0252, 0258, 0262, 0266, 0274, 0286, 0290, 0296, 0298, 0306,
0315, 0319, 0326, 0330, 0332, 0336, 0340, 0342, 0346, 0350, 0356, 0362, 0368, 0372,
0374, 0380, 0382, 0386, 0388, 0399, 0402, 0415, 0420, 0424, 0426, 0432, 0434, 0446, 0482
350-1041
CONF ALL
(2) Applicability by MSN
0065 0071 0088 0102 0110 0118 0125 0141 0161 0169 0188 0206 0215 0225 0229
0233 0241 0252 0258 0262 0266 0274 0286 0290 0296 0298 0306 0315 0319 0326
0330 0332 0336 0340 0342 0346 0350 0356 0362 0368 0372 0374 0380 0382 0386
0388 0399 0402 0415 0420 0424 0426 0432 0434 0446 0482
(3) MSN by configuration
CONF 001
MSN CONFIGURATION
0065 0071 0088 0102 0110 0118 0125 0141 0161 0169 0188
0206 0215 0225 0229 0233 0241 0252 0258 0262 0266 0274
0286 0290 0296 0298 0306 0315 0319 0326 0330 0332 0336
0340 0342 0346 0350 0356 0362 0368 0372 0374 0380 0382
0386 0388
001
CONF 002
MSN CONFIGURATION
0399 0402 0415 0420 0424 0426 0432 0434 0446 0482 002
CONF ALL
(4) Configuration definition
CONF 001
Configuration 001
CONF 001 is applicable for aircraft on which MOD No. 116001L83738 is not
embodied.
CONF 001 retrofits following modifications: 114656L83719, 116001L83738.

### Page 8

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 8
CONF 002
Configuration 002
CONF 002 is applicable for aircraft on which MOD No. 116001L83738 is
embodied.
CONF 002 retrofits following modifications: 114656L83719.
CONF ALL
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
A potential clash between RAT blade tip and Belly Fairing (BF) RAT inboard door at
10.5º angle RAT deployment, has been identified in FAL during RAT ground extension.
During the acceptance flight, no contact during RAT deployment has occurred.
However, the acceptance flight does not cover all the flight envelope conditions.
Investigation revealed that a clash with the BF inboard door cannot be excluded for
the entire flight envelope.
(2) Objective/Action
The objective of this Service Bulletin is to install a new BF inboard RAT door and BF
adjacent panels. The new design solution for RAT door and panels will prevent any
potential clash during RAT deployment.
This SB provides instructions to implement MOD No. 114656L83719 and MOD No.
116001L83738, which consists of replacing the RAT door and BF panels 198HS, 198ES
and 198FS. For those A/C that have already incorporated MOD No. 116001L83738,
the SB provides instructions to implement MOD No. 114656L83719, which consist of
replacing RAT door and BF panels 198ES and 198FS.
(3) Advantages
The accomplishment of this SB will increase the clearance between the inboard RAT
door and the RAT blades to prevent any potential clash during RAT deployment.
(4) Operational/Maintenance Consequences
NONE
D. DESCRIPTION
T o accomplish this Service Bulletin it is necessary to:
(1) Modification
(a) T ask set A350-A-53-XX-P069-01000-93AA-A Modification
CONF 001
1 Remove RAT Door 198PR
CONF 002
1 Remove RAT Door 198PR
CONF 001
2 Remove Access Panel 198FS
CONF 002
2 Remove Access Panel 198FS
CONF 001
3 Remove Access Panel 198ES

### Page 9

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 9
CONF 002
3 Remove Access Panel 198ES
CONF 001
4 Remove Access Panel 198HS
5 Install Access Panel 198FS
CONF 002
5 Install Access Panel 198FS
CONF 001
6 Install Access Panel 198ES
CONF 002
6 Install Access Panel 198ES
CONF 001
7 Install Access Panel 198HS
8 Install RAT Door 198PR
CONF 002
8 Install RAT Door 198PR
CONF 001
9 Adjustment of the RAT Door
CONF 002
9 Adjustment of the RAT Door
CONF ALL
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
Accomplishment of this Service Bulletin must be done no later than Sep 30/22.
This Service Bulletin has been classified Mandatory. It is expected that an
Airworthiness Directive (AD) published by the European Union Aviation Safety Agency
(EASA) will be issued to confirm this classification. It is anticipated that the AD will
confirm the (thresholds and/or intervals and/or date) given but reference should be
made to the AD for confirmation of the mandated accomplishment timescale.
F. APPROVAL
The technical content of this document is approved under the authority of the Design
Organisation Approval ref. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
CONF 001
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts

### Page 10

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 10
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) T ask set A350-A-53-XX-P069-01000-93AA-A Modification
PREPARATION
Job Set-up 0.50 h
PROCEDURE
Remove RAT Door 198PR 1.00 h
Remove Access Panel 198FS 3.75 h
Remove Access Panel 198ES 3.00 h
Remove Access Panel 198HS 2.75 h
Install Access Panel 198FS 3.75 h
Install Access Panel 198ES 3.00 h
Install Access Panel 198HS 2.75 h
Install RAT Door 198PR 1.00 h
Adjustment of the RAT Door 2.00 h
PREPARATION FOR TEST
Preparation for T est 0.50 h
TEST
Operational T est of the RAT Doors 0.50 h
CLOSE-UP
Close-up 0.50 h
TOTAL MAN-HOURS 25.00 h
ELAPSED TIME (HOURS) 25.00 h
CONF 002
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) T ask set A350-A-53-XX-P069-01000-93AA-A Modification
PREPARATION
Job Set-up 0.50 h
PROCEDURE
Remove RAT Door 198PR 1.00 h
Remove Access Panel 198FS 3.75 h
Remove Access Panel 198ES 3.00 h
Install Access Panel 198FS 3.75 h
Install Access Panel 198ES 3.00 h
Install RAT Door 198PR 1.00 h
Adjustment of the RAT Door 2.00 h

### Page 11

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 11
PREPARATION FOR TEST
Preparation for T est 0.50 h
TEST
Operational T est of the RAT Doors 0.50 h
CLOSE-UP
Close-up 0.50 h
TOTAL MAN-HOURS 19.50 h
ELAPSED TIME (HOURS) 19.50 h
CONF ALL
H. WEIGHT AND BALANCE
Not changed
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
CONF 001
(1) Modification
(a) T ask set A350-A-53-XX-P069-01000-93AA-A Modification
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-4X-XX-01ZZZ-667Z-A
A350-A-51-42-XX-01ZZZ-667Z-A A350-A-51-43-XX-01ZZZ-667Z-A
A350-A-51-75-12-00ZZZ-660Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-5X-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-20-51-50-01ZZZ-25BZ-A A350-A-24-24-XX-00ZZZ-398Z-A
A350-A-24-24-XX-02ZZZ-398Z-A
A350-A-24-24-XX-03ZZZ-398Z-A
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-52-46-73-00ZZZ-520Z-A
A350-A-52-46-73-00ZZZ-720Z-A
A350-A-53-35-76-1LZZZ-520Z-A
A350-A-53-35-76-1LZZZ-720Z-A
A350-A-53-35-76-1UZZZ-520Z-A
A350-A-53-35-76-1UZZZ-720Z-A
A350-A-53-35-76-1VZZZ-520Z-A
A350-A-53-35-76-1VZZZ-720Z-A

### Page 12

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 12
SYSTEM DESCRIPTION (SD)
A350-A-06-2X-XX-01ZZZ-04CZ-A A350-A-06-3X-XX-01ZZZ-04CZ-A
TECHNICAL FOLLOW UP (TFU)
52.46.00002
STANDARDS MANUAL (SM)
CONSUMABLE MATERIAL LIST (CML)
CONF 002
(1) Modification
(a) T ask set A350-A-53-XX-P069-01000-93AA-A Modification
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-4X-XX-01ZZZ-667Z-A
A350-A-51-42-XX-01ZZZ-667Z-A A350-A-51-43-XX-01ZZZ-667Z-A
A350-A-51-75-12-00ZZZ-660Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-5X-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-20-51-50-01ZZZ-25BZ-A A350-A-24-24-XX-00ZZZ-398Z-A
A350-A-24-24-XX-02ZZZ-398Z-A
A350-A-24-24-XX-03ZZZ-398Z-A
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-52-46-73-00ZZZ-520Z-A
A350-A-52-46-73-00ZZZ-720Z-A
A350-A-53-35-76-1LZZZ-520Z-A
A350-A-53-35-76-1LZZZ-720Z-A
A350-A-53-35-76-1UZZZ-520Z-A
A350-A-53-35-76-1UZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-2X-XX-01ZZZ-04CZ-A A350-A-06-3X-XX-01ZZZ-04CZ-A
TECHNICAL FOLLOW UP (TFU)
52.46.00002
STANDARDS MANUAL (SM)
CONSUMABLE MATERIAL LIST (CML)
CONF ALL
K. PUBLICATION AFFECTED
MAINTENANCE PROCEDURE (MP)

### Page 13

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 13
L. INDUSTRY SUPPORT INFORMATION
AIRBUS will share the costs of accomplishment of this Service Bulletin by providing the kits
at no charge for orders placed before Sep 30/22.
AIRBUS will credit the man-hours indicated in this Service Bulletin at the agreed in-house
warranty labor rate for claims received no later than 90 days after completion of the last
affected aircraft of your fleet, for the accomplishment of this Service Bulletin before Sep 30/
22.
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.

### Page 14

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 14
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
CONF 001
Material for task set A350-A-53-XX-P069-01000-93AA-A Modification
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Part kit 53P069C01R04 1
Referenced parts See SB
Interchangeable parts See SB
Spare parts See SB
CONF 002
Material for task set A350-A-53-XX-P069-01000-93AA-A Modification
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Part kit 53P069C04R01 1
Referenced parts See SB
Interchangeable parts See SB
Spare parts See SB
CONF ALL
B. TOOLING
CONF 001
Referenced tools for task set A350-A-53-XX-P069-01000-93AA-A Modification
T o accomplish this Service Bulletin, it is necessary to use the tools listed in the subsequent
referenced tasks:
Ref. MP A350-A-53-35-76-1LZZZ-520Z-A
CONF 002
Referenced tools for task set A350-A-53-XX-P069-01000-93AA-A Modification
T o accomplish this Service Bulletin, it is necessary to use the tools listed in the subsequent
referenced tasks:
Ref. MP A350-A-53-35-76-1LZZZ-520Z-A
CONF ALL
C. CONSUMABLES
CONF 001
Consumables for task set A350-A-53-XX-P069-01000-93AA-A Modification

### Page 15

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 15
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
03GBC1
Synthetic Oil base Grease
- General Purpose Lithium
Thickened Low T emp
04QAB2 Coating - - FlexibleStructure
04QAC5
Coating - - Corrosion
Inhibiting Fastener Head
Protection
06ACA1
Polysulfide Sealant - Low
Density MultiPurpose
Brushable
06LCB1
Non Hardening Jointing
Putty - Medium T emp. Area
Chromate Free
06LCG9 Non Hardening JointingPutty - Medium T emp. Area
14QFB1 Wire - Locking Dia: 0.8 mmCRES Nickel Alloy
CONF 002
Consumables for task set A350-A-53-XX-P069-01000-93AA-A Modification
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
03GBC1
Synthetic Oil base Grease
- General Purpose Lithium
Thickened Low T emp
04QAB2 Coating - - FlexibleStructure
04QAC5
Coating - - Corrosion
Inhibiting Fastener Head
Protection
06ACA1
Polysulfide Sealant - Low
Density MultiPurpose
Brushable
06LCB1
Non Hardening Jointing
Putty - Medium T emp. Area
Chromate Free
06LCG9 Non Hardening JointingPutty - Medium T emp. Area
14QFB1 Wire - Locking Dia: 0.8 mmCRES Nickel Alloy
CONF 001
Referenced consumables for task set A350-A-53-XX-P069-01000-93AA-A
Modification
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. MP A350-A-52-46-73-00ZZZ-720Z-A
Ref. MP A350-A-53-35-76-1LZZZ-720Z-A

### Page 16

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 16
CONF 002
Referenced consumables for task set A350-A-53-XX-P069-01000-93AA-A
Modification
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. MP A350-A-52-46-73-00ZZZ-720Z-A
Ref. MP A350-A-53-35-76-1LZZZ-720Z-A
CONF ALL
D. LIST OF NEW PARTS
CONF 001
Part kit 53P069C01R04
Cost 160500.00 USD
Availability 180 d (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead time for ordering purposes shall be
obtained through the AIRBUS Spares portal or through a request for quotation to
airbus.kit@airbus.com.
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.
Procurement address D4296
AIRBUS
Material, Logistics and Suppliers ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
Phone: +49 40 743 51775
E-mail: airbus.kit@airbus.com
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 V5248638102000 1 DOOR
2 V5338834700400 1 PANEL
3 V5338834601200 1 PANEL
4 V5338834800800 1 PANEL
16 MS24665-151 2 PIN
26 V5338692921000 6 SPACER
27 V5338692920800 4 SPACER
28 V5338885220000 2 DAMPER
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.

### Page 17

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 17
CONF 002
Part kit 53P069C04R01
Cost 150500.00 USD
Availability 180 d (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead time for ordering purposes shall be
obtained through the AIRBUS Spares portal or through a request for quotation to
airbus.kit@airbus.com.
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.
Procurement address D4296
AIRBUS
Material, Logistics and Suppliers ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
Phone: +49 40 743 51775
E-mail: airbus.kit@airbus.com
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 V5248638102000 1 DOOR
2 V5338834700400 1 PANEL
3 V5338834601200 1 PANEL
16 MS24665-151 2 PIN
26 V5338692921000 6 SPACER
27 V5338692920800 4 SPACER
28 V5338885220000 2 DAMPER
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
CONF 001
Referenced parts for task set A350-A-53-XX-P069-01000-93AA-A Modification
T o accomplish this Service Bulletin it is necessary to use the expendable parts listed in:
Ref. MP A350-A-52-46-73-00ZZZ-720Z-A
CONF 002
Referenced parts for task set A350-A-53-XX-P069-01000-93AA-A Modification
T o accomplish this Service Bulletin it is necessary to use the expendable parts listed in:
Ref. MP A350-A-52-46-73-00ZZZ-720Z-A

### Page 18

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 18
CONF ALL
E. LIST OF EXISTING PARTS
CONF 001
Interchangeable parts for task set A350-A-53-XX-P069-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
DOOR ASSY-198PR V5248638100800 V5248638102000 03 (1)
DOOR ASSY-198PR V5248638101000 V5248638102000 03 (1)
DOOR ASSY-198PR V5248638101200 V5248638102000 03 (1)
DOOR ASSY-198PR V5248638101400 V5248638102000 03 (1)
PANEL ASSY-198ES V5338834600000 V5338834601200 03 (1)
PANEL ASSY-198ES V5338834600400 V5338834601200 03 (1)
PANEL ASSY-198ES V5338834600600 V5338834601200 03 (1)
PANEL ASSY-198ES V5338834600800 V5338834601200 03 (1)
PANEL ASSY-198FS V5338834700000 V5338834700400 03 (1)
PANEL ASSY-198HS V5338834800000 V5338834800800 01 (1)
PANEL ASSY-198HS V5338834800400 V5338834800800 01 (1)
PANEL ASSY-198HS V5338834800600 V5338834800800 01 (1)
PANEL ASSY-198HS V5338834800800 V5338834800800 01 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 002
Interchangeable parts for task set A350-A-53-XX-P069-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
DOOR ASSY-198PR V5248638101000 V5248638102000 03 (1)
PANEL ASSY-198ES V5338834600800 V5338834601200 03 (1)
PANEL ASSY-198FS V5338834700000 V5338834700400 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 001
Spare parts for task set A350-A-53-XX-P069-01000-93AA-A Modification
DESCRIPTION OLD PART No. SEE NOTES
DOOR ASSY-198PR V5248638100800 (1)
DOOR ASSY-198PR V5248638101000 (1)
DOOR ASSY-198PR V5248638101200 (1)
DOOR ASSY-198PR V5248638101400 (1)
PANEL ASSY-198ES V5338834600000 (1)

### Page 19

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 19
DESCRIPTION OLD PART No. SEE NOTES
PANEL ASSY-198ES V5338834600400 (1)
PANEL ASSY-198ES V5338834600600 (1)
PANEL ASSY-198ES V5338834600800 (1)
PANEL ASSY-198FS V5338834700000 (1)
PANEL ASSY-198HS V5338834800000 (1)
PANEL ASSY-198HS V5338834800400 (1)
PANEL ASSY-198HS V5338834800600 (1)
PANEL ASSY-198HS V5338834800800 (1)
NOTE(S)
(1): The parts listed here must not be installed anymore on aircraft which have
accomplished this Service Bulletin or which have the equivalent production
modification embodied.
CONF 002
Spare parts for task set A350-A-53-XX-P069-01000-93AA-A Modification
DESCRIPTION OLD PART No. SEE NOTES
DOOR ASSY-198PR V5248638101000 (1)
PANEL ASSY-198ES V5338834600800 (1)
PANEL ASSY-198FS V5338834700000 (1)
NOTE(S)
(1): The parts listed here must not be installed anymore on aircraft which have
accomplished this Service Bulletin or which have the equivalent production
modification embodied.

### Page 20

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 20
CONF ALL
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A350-A-53-XX-P069-01000-93AA-A (A350-A-53-XX-P069-01ZZZ-93AZ-A)
Modification
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESP A350-A-20-5X-XX-01ZZZ-
042Z-A
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin is classified mandatory or expected to be classified mandatory by
an Airworthiness Directive (AD). The paragraphs 3.C. and 3.E. in these accomplishment
instructions are Required for Compliance (RC) and must be done to comply with the AD.
T o allow more flexibility, the rule "refer to" and "in accordance with" will apply to these
paragraphs 3.C. and 3.E. Other paragraphs are recommended and may be deviated from,
done as part of other actions or done with accepted methods different from those given
in the Service Bulletin, as long as the RC paragraphs can be done and the aircraft can be
put back into a serviceable condition.
NOTE: Discarded parts must be managed at the operator's discretion.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including Required for Compliance paragraph
contained herein, contact AIRBUS for further instructions and approval.
A. TASK SET ASSOCIATED INFORMATION
Task Manpower
CONF 001
TOTAL MAN-HOURS 25.00 h

### Page 21

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 21
CONF 002
TOTAL MAN-HOURS 19.50 h
CONF 001
ELAPSED TIME (HOURS) 25.00 h
CONF 002
ELAPSED TIME (HOURS) 19.50 h
CONF ALL
B. PREPARATION
(1) Task A350-A-53-XX-P069-01001-540A-A (A350-A-53-XX-P069-01ZZZ-540Z-A)
Job Set-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.50 h
Minimum Number of person 1
Elapsed Time 0.50 h
Referenced Information
Manuals/Drawings References/Sheets
INTRO A350-A-00-61-04-11ZZZ-018Z-D
MP
A350-A-24-41-XX-00ZZZ-170Z-A
A350-A-52-46-73-00ZZZ-520Z-A
A350-A-53-35-76-1LZZZ-520Z-A
Procedure
NOTE: For the basic Aircraft configuration, refer to Ref. INTRO A350-A-00-61-04-
11ZZZ-018Z-D “Maintenance Procedure - Introduction”.
(a) Make sure that the aircraft is electrically grounded, refer to Ref. MP A350-A-24-
41-XX-00ZZZ-170Z-A.
(b) Do the job set-up procedure as specified in the Removal of the Ram Air T urbine
(RAT) Doors, refer to Ref. MP A350-A-52-46-73-00ZZZ-520Z-A.
(c) Do the job set-up procedure as specified in the Removal of Access Panel 198FS,
refer to Ref. MP A350-A-53-35-76-1LZZZ-520Z-A.
C. PROCEDURE
CONF 001
(1) Task A350-A-53-XX-P069-01001-520A-A (A350-A-53-XX-P069-01ZZZ-520Z-A)
Remove RAT Door 198PR
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
198
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Airframe

### Page 22

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 22
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-42-XX-01ZZZ-667Z-A
MP A350-A-52-46-73-00ZZZ-520Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
3 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-XX-
01ZZZ-667Z-A.
4 Put all the retained hardware in identified plastic bags and attach the bags
to the related unit.
(b) Do the removal procedure as specified in the Removal of RAT Door 198PR, refer
to Ref. MP A350-A-52-46-73-00ZZZ-520Z-A and Ref. Fig.BA RAT Door Panel 198PR
Removal.
1 DOOR ASSY-198PR V5248638100800 Item (1) Discard
or
1 DOOR ASSY-198PR V5248638101000 Item (1) Discard
or
1 DOOR ASSY-198PR V5248638101200 Item (1) Discard
or
1 DOOR ASSY-198PR V5248638101400 Item (1) Discard

### Page 23

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP069-A-FAPE3-05Z0A-A-002-01 Fig.BA Sol.AA SHEET 1/1
REV 00 Jun 28/21 A350-53-P069RAT Door Panel 198PR Removal
Page 23
CONF 001
A
Z190
Z198
A
B
FR69 FR68
B
(1)
ICN-A350-A-53XXP069-A-FAPE3-05Z0A-A-002-01

### Page 24

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 24
CONF 002
(1) Task A350-A-53-XX-P069-01002-520A-A (A350-A-53-XX-P069-01ZZZ-520Z-A)
Remove RAT Door 198PR
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
198
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Airframe
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-42-XX-01ZZZ-667Z-A
MP A350-A-52-46-73-00ZZZ-520Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
3 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-XX-
01ZZZ-667Z-A.
4 Put all the retained hardware in identified plastic bags and attach the bags
to the related unit.
(b) Do the removal procedure as specified in the Removal of RAT Door 198PR, refer
to Ref. MP A350-A-52-46-73-00ZZZ-520Z-A and Ref. Fig.BA RAT Door Panel 198PR
Removal.
1 DOOR ASSY-198PR V5248638101000 Item (1) Discard

### Page 25

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP069-A-FAPE3-05Z0A-A-002-01 Fig.BA Sol.AA SHEET 1/1
REV 00 Jun 28/21 A350-53-P069RAT Door Panel 198PR Removal
Page 25
CONF 002
A
Z190
Z198
A
B
FR69 FR68
B
(1)
ICN-A350-A-53XXP069-A-FAPE3-05Z0A-A-002-01

### Page 26

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 26
CONF 001
(2) Task A350-A-53-XX-P069-02001-520A-A (A350-A-53-XX-P069-02ZZZ-520Z-A)
Remove Access Panel 198FS
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
198
Manpower/Resources/Skills
Man-hours 3.75 h
Minimum Number of person 1
Elapsed Time 3.75 h
Skills Airframe
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-42-XX-01ZZZ-667Z-A
MP A350-A-53-35-76-1LZZZ-520Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
3 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-XX-
01ZZZ-667Z-A.
4 Put all the retained hardware in identified plastic bags and attach the bags
to the related unit.
(b) Do the removal procedure as specified in the Removal of Access Panel 198FS,
refer to Ref. MP A350-A-53-35-76-1LZZZ-520Z-A and Ref. Fig.BB Panel 198FS
Removal.
1 PANEL ASSY-198FS V5338834700000 Item (2) Discard

### Page 27

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP069-A-FAPE3-05Z0D-A-001-01 Fig.BB Sol.AA SHEET 1/1
REV 00 Jun 28/21 A350-53-P069Panel 198FS Removal
Page 27
CONF 001
A
Z190
Z198
A
B
FR69 FR68
B
(2)
ICN-A350-A-53XXP069-A-FAPE3-05Z0D-A-001-01

### Page 28

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 28
CONF 002
(2) Task A350-A-53-XX-P069-02002-520A-A (A350-A-53-XX-P069-02ZZZ-520Z-A)
Remove Access Panel 198FS
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
198
Manpower/Resources/Skills
Man-hours 3.75 h
Minimum Number of person 1
Elapsed Time 3.75 h
Skills Airframe
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-42-XX-01ZZZ-667Z-A
MP A350-A-53-35-76-1LZZZ-520Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
3 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-XX-
01ZZZ-667Z-A.
4 Put all the retained hardware in identified plastic bags and attach the bags
to the related unit.
(b) Do the removal procedure as specified in the Removal of Access Panel 198FS,
refer to Ref. MP A350-A-53-35-76-1LZZZ-520Z-A and Ref. Fig.BB Panel 198FS
Removal.
1 PANEL ASSY-198FS V5338834700000 Item (2) Discard

### Page 29

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP069-A-FAPE3-05Z0D-A-001-01 Fig.BB Sol.AA SHEET 1/1
REV 00 Jun 28/21 A350-53-P069Panel 198FS Removal
Page 29
CONF 002
A
Z190
Z198
A
B
FR69 FR68
B
(2)
ICN-A350-A-53XXP069-A-FAPE3-05Z0D-A-001-01

### Page 30

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 30
CONF 001
(3) Task A350-A-53-XX-P069-03001-520A-A (A350-A-53-XX-P069-03ZZZ-520Z-A)
Remove Access Panel 198ES
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
198
Manpower/Resources/Skills
Man-hours 3.00 h
Minimum Number of person 1
Elapsed Time 3.00 h
Skills Airframe
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-42-XX-01ZZZ-667Z-A
MP A350-A-53-35-76-1UZZZ-520Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
3 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-XX-
01ZZZ-667Z-A.
4 Put all the retained hardware in identified plastic bags and attach the bags
to the related unit.
(b) Do the removal procedure as specified in the Removal of Access Panel 198ES,
refer to Ref. MP A350-A-53-35-76-1UZZZ-520Z-A and Ref. Fig.BC Panel 198ES
Removal.
1 PANEL ASSY-198ES V5338834600000 Item (3) Discard
or
1 PANEL ASSY-198ES V5338834600400 Item (3) Discard
or
1 PANEL ASSY-198ES V5338834600600 Item (3) Discard
or
1 PANEL ASSY-198ES V5338834600800 Item (3) Discard

### Page 31

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP069-A-FAPE3-05Z0H-A-001-01 Fig.BC Sol.AA SHEET 1/1
REV 00 Jun 28/21 A350-53-P069Panel 198ES Removal
Page 31
CONF 001
A
Z190
Z198
A
B
FR69 FR68
B
(3)
ICN-A350-A-53XXP069-A-FAPE3-05Z0H-A-001-01

### Page 32

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 32
CONF 002
(3) Task A350-A-53-XX-P069-03002-520A-A (A350-A-53-XX-P069-03ZZZ-520Z-A)
Remove Access Panel 198ES
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
198
Manpower/Resources/Skills
Man-hours 3.00 h
Minimum Number of person 1
Elapsed Time 3.00 h
Skills Airframe
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-42-XX-01ZZZ-667Z-A
MP A350-A-53-35-76-1UZZZ-520Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
3 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-XX-
01ZZZ-667Z-A.
4 Put all the retained hardware in identified plastic bags and attach the bags
to the related unit.
(b) Do the removal procedure as specified in the Removal of Access Panel 198ES,
refer to Ref. MP A350-A-53-35-76-1UZZZ-520Z-A Ref. Fig.BC Panel 198ES
Removal.
1 PANEL ASSY-198ES V5338834600800 Item (3) Discard

### Page 33

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP069-A-FAPE3-05Z0H-A-001-01 Fig.BC Sol.AA SHEET 1/1
REV 00 Jun 28/21 A350-53-P069Panel 198ES Removal
Page 33
CONF 002
A
Z190
Z198
A
B
FR69 FR68
B
(3)
ICN-A350-A-53XXP069-A-FAPE3-05Z0H-A-001-01

### Page 34

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 34
CONF 001
(4) Task A350-A-53-XX-P069-04001-520A-A (A350-A-53-XX-P069-04ZZZ-520Z-A)
Remove Access Panel 198HS
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
198
Manpower/Resources/Skills
Man-hours 2.75 h
Minimum Number of person 1
Elapsed Time 2.75 h
Skills Airframe
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-42-XX-01ZZZ-667Z-A
MP A350-A-53-35-76-1VZZZ-520Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
3 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-XX-
01ZZZ-667Z-A.
4 Put all the retained hardware in identified plastic bags and attach the bags
to the related unit.
(b) Do the removal procedure as specified in the Removal of Access Panel 198HS,
refer to Ref. MP A350-A-53-35-76-1VZZZ-520Z-A and Ref. Fig.BD Panel 198HS
Removal.
1 PANEL ASSY-198HS V5338834800000 Item (4) Discard
or
1 PANEL ASSY-198HS V5338834800400 Item (4) Discard
or
1 PANEL ASSY-198HS V5338834800600 Item (4) Discard
or
1 PANEL ASSY-198HS V5338834800800 Item (4) Discard

### Page 35

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP069-A-FAPE3-05Z0F-A-001-01 Fig.BD Sol.AA SHEET 1/1
REV 00 Jun 28/21 A350-53-P069Panel 198HS Removal
Page 35
CONF 001
A
Z190
Z198
A
B
FR69 FR68
B
(4)
ICN-A350-A-53XXP069-A-FAPE3-05Z0F-A-001-01

### Page 36

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 36
(5) Task A350-A-53-XX-P069-01001-720A-A (A350-A-53-XX-P069-01ZZZ-720Z-A)
Install Access Panel 198FS
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
198
Manpower/Resources/Skills
Man-hours 3.75 h
Minimum Number of person 1
Elapsed Time 3.75 h
Skills Airframe
Material necessary to do the job
Part kit 53P069C01R04
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
2 V5338834700400 1 PANEL
Referenced Information
Manuals/Drawings References/Sheets
ASR
A350-A-51-24-XX-01ZZZ-667Z-A
A350-A-51-42-XX-01ZZZ-667Z-A
A350-A-51-43-XX-01ZZZ-667Z-A
A350-A-51-4X-XX-01ZZZ-667Z-A
A350-A-51-75-12-00ZZZ-660Z-A
MP A350-A-20-51-50-01ZZZ-25BZ-AA350-A-53-35-76-1LZZZ-720Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
3 For Standard Mechanical T orques, refer to Ref. MP A350-A-20-51-50-01ZZZ-
25BZ-A.
4 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-XX-
01ZZZ-667Z-A.
5 Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
6 Repair the paint coating in accordance with Ref. ASR A350-A-51-75-12-
00ZZZ-660Z-A.
7 Obtain alternative and substitute fastener data in accordance with Ref. ASR
A350-A-51-43-XX-01ZZZ-667Z-A.
8 If alternative and substitute fasteners have to be used, you must make
sure that the associated nut/collar are compatible in accordance with Ref.
ASR A350-A-51-4X-XX-01ZZZ-667Z-A.

### Page 37

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 37
9 If the length of any fastener specified in this Service Bulletin does not meet
installation standards given in ASR Data Module 51-4, then a fastener of
the same specification, or an approved substitute, with a length which
meets the installation standards given in ASR Data Module 51-4 may be
used.
(b) Do the installation procedure of the Access Panel 198FS as specified in the
Installation of Access Panel 198FS, refer to Ref. MP A350-A-53-35-76-1LZZZ-
720Z-A and Ref. Fig.BF Panel 198FS Installation.
1 PANEL ASSY-198FS V5338834700400 Item 2

### Page 38

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP069-A-FAPE3-05Z0I-A-001-01 Fig.BF Sol.AA SHEET 1/1
REV 00 Jun 28/21 A350-53-P069Panel 198FS Installation
Page 38
CONF 001
A
Z190
Z198
A
B
FR69 FR68
B
2
ICN-A350-A-53XXP069-A-FAPE3-05Z0I-A-001-01

### Page 39

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 39
CONF 002
(5) Task A350-A-53-XX-P069-01002-720A-A (A350-A-53-XX-P069-01ZZZ-720Z-A)
Install Access Panel 198FS
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
198
Manpower/Resources/Skills
Man-hours 3.75 h
Minimum Number of person 1
Elapsed Time 3.75 h
Skills Airframe
Material necessary to do the job
Part kit 53P069C04R01
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
2 V5338834700400 1 PANEL
Referenced Information
Manuals/Drawings References/Sheets
ASR
A350-A-51-24-XX-01ZZZ-667Z-A
A350-A-51-42-XX-01ZZZ-667Z-A
A350-A-51-43-XX-01ZZZ-667Z-A
A350-A-51-4X-XX-01ZZZ-667Z-A
A350-A-51-75-12-00ZZZ-660Z-A
MP A350-A-20-51-50-01ZZZ-25BZ-AA350-A-53-35-76-1LZZZ-720Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
3 For Standard Mechanical T orques, refer to Ref. MP A350-A-20-51-50-01ZZZ-
25BZ-A.
4 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-XX-
01ZZZ-667Z-A.
5 Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
6 Repair the paint coating in accordance with Ref. ASR A350-A-51-75-12-
00ZZZ-660Z-A.
7 Obtain alternative and substitute fastener data in accordance with Ref. ASR
A350-A-51-43-XX-01ZZZ-667Z-A.

### Page 40

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 40
8 If alternative and substitute fasteners have to be used, you must make
sure that the associated nut/collar are compatible in accordance with Ref.
ASR A350-A-51-4X-XX-01ZZZ-667Z-A.
9 If the length of any fastener specified in this Service Bulletin does not meet
installation standards given in ASR Data Module 51-4, then a fastener of
the same specification, or an approved substitute, with a length which
meets the installation standards given in ASR Data Module 51-4 may be
used.
(b) Do the installation procedure of the Access Panel 198FS as specified in the
Installation of Access Panel 198FS, refer to Ref. MP A350-A-53-35-76-1LZZZ-
720Z-A and Ref. Fig.BF Panel 198FS Installation.
1 PANEL ASSY-198FS V5338834700400 Item 2

### Page 41

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP069-A-FAPE3-05Z0I-A-001-01 Fig.BF Sol.AA SHEET 1/1
REV 00 Jun 28/21 A350-53-P069Panel 198FS Installation
Page 41
CONF 002
A
Z190
Z198
A
B
FR69 FR68
B
2
ICN-A350-A-53XXP069-A-FAPE3-05Z0I-A-001-01

### Page 42

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 42
CONF 001
(6) Task A350-A-53-XX-P069-03001-720A-A (A350-A-53-XX-P069-03ZZZ-720Z-A)
Install Access Panel 198ES
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
198
Manpower/Resources/Skills
Man-hours 3.00 h
Minimum Number of person 1
Elapsed Time 3.00 h
Skills Airframe
Material necessary to do the job
Part kit 53P069C01R04
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
3 V5338834601200 1 PANEL
Referenced Information
Manuals/Drawings References/Sheets
ASR
A350-A-51-24-XX-01ZZZ-667Z-A
A350-A-51-42-XX-01ZZZ-667Z-A
A350-A-51-43-XX-01ZZZ-667Z-A
A350-A-51-4X-XX-01ZZZ-667Z-A
A350-A-51-75-12-00ZZZ-660Z-A
MP A350-A-20-51-50-01ZZZ-25BZ-AA350-A-53-35-76-1UZZZ-720Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
3 For Standard Mechanical T orques, refer to Ref. MP A350-A-20-51-50-01ZZZ-
25BZ-A.
4 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-XX-
01ZZZ-667Z-A.
5 Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
6 Repair the paint coating in accordance with Ref. ASR A350-A-51-75-12-
00ZZZ-660Z-A.
7 Obtain alternative and substitute fastener data in accordance with Ref. ASR
A350-A-51-43-XX-01ZZZ-667Z-A.

### Page 43

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 43
8 If alternative and substitute fasteners have to be used, you must make
sure that the associated nut/collar are compatible in accordance with Ref.
ASR A350-A-51-4X-XX-01ZZZ-667Z-A.
9 If the length of any fastener specified in this Service Bulletin does not meet
installation standards given in ASR Data Module 51-4, then a fastener of
the same specification, or an approved substitute, with a length which
meets the installation standards given in ASR Data Module 51-4 may be
used.
(b) Do the installation procedure of the Access Panel 198ES as specified in the
Installation of Access Panel 198ES, refer to Ref. MP A350-A-53-35-76-1UZZZ-
720Z-A and Ref. Fig.BG Panel 198ES Installation.
1 PANEL ASSY-198ES V5338834601200 Item 3

### Page 44

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP069-A-FAPE3-05Z0E-A-001-01 Fig.BG Sol.AA SHEET 1/1
REV 00 Jun 28/21 A350-53-P069Panel 198ES Installation
Page 44
CONF 001
A
Z190
Z198
A
B
FR69 FR68
B
3
ICN-A350-A-53XXP069-A-FAPE3-05Z0E-A-001-01

### Page 45

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 45
CONF 002
(6) Task A350-A-53-XX-P069-03002-720A-A (A350-A-53-XX-P069-03ZZZ-720Z-A)
Install Access Panel 198ES
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
198
Manpower/Resources/Skills
Man-hours 3.00 h
Minimum Number of person 1
Elapsed Time 3.00 h
Skills Airframe
Material necessary to do the job
Part kit 53P069C04R01
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
3 V5338834601200 1 PANEL
Referenced Information
Manuals/Drawings References/Sheets
ASR
A350-A-51-24-XX-01ZZZ-667Z-A
A350-A-51-42-XX-01ZZZ-667Z-A
A350-A-51-43-XX-01ZZZ-667Z-A
A350-A-51-4X-XX-01ZZZ-667Z-A
A350-A-51-75-12-00ZZZ-660Z-A
MP A350-A-20-51-50-01ZZZ-25BZ-AA350-A-53-35-76-1UZZZ-720Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
3 For Standard Mechanical T orques, refer to Ref. MP A350-A-20-51-50-01ZZZ-
25BZ-A.
4 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-XX-
01ZZZ-667Z-A.
5 Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
6 Repair the paint coating in accordance with Ref. ASR A350-A-51-75-12-
00ZZZ-660Z-A.
7 Obtain alternative and substitute fastener data in accordance with Ref. ASR
A350-A-51-43-XX-01ZZZ-667Z-A.

### Page 46

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 46
8 If alternative and substitute fasteners have to be used, you must make
sure that the associated nut/collar are compatible in accordance with Ref.
ASR A350-A-51-4X-XX-01ZZZ-667Z-A.
9 If the length of any fastener specified in this Service Bulletin does not meet
installation standards given in ASR Data Module 51-4, then a fastener of
the same specification, or an approved substitute, with a length which
meets the installation standards given in ASR Data Module 51-4 may be
used.
(b) Do the installation procedure of the Access Panel 198ES as specified in the
Installation of Access Panel 198ES, refer to Ref. MP A350-A-53-35-76-1UZZZ-
720Z-A and Ref. Fig.BG Panel 198ES Installation.
1 PANEL ASSY-198ES V5338834601200 Item 3

### Page 47

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP069-A-FAPE3-05Z0E-A-001-01 Fig.BG Sol.AA SHEET 1/1
REV 00 Jun 28/21 A350-53-P069Panel 198ES Installation
Page 47
CONF 002
A
Z190
Z198
A
B
FR69 FR68
B
3
ICN-A350-A-53XXP069-A-FAPE3-05Z0E-A-001-01

### Page 48

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 48
CONF 001
(7) Task A350-A-53-XX-P069-04001-720A-A (A350-A-53-XX-P069-04ZZZ-720Z-A)
Install Access Panel 198HS
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
198
Manpower/Resources/Skills
Man-hours 2.75 h
Minimum Number of person 1
Elapsed Time 2.75 h
Skills Airframe
Material necessary to do the job
Part kit 53P069C01R04
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
4 V5338834800800 1 PANEL
Referenced Information
Manuals/Drawings References/Sheets
ASR
A350-A-51-24-XX-01ZZZ-667Z-A
A350-A-51-42-XX-01ZZZ-667Z-A
A350-A-51-43-XX-01ZZZ-667Z-A
A350-A-51-4X-XX-01ZZZ-667Z-A
A350-A-51-75-12-00ZZZ-660Z-A
MP A350-A-20-51-50-01ZZZ-25BZ-AA350-A-53-35-76-1VZZZ-720Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
3 For Standard Mechanical T orques, refer to Ref. MP A350-A-20-51-50-01ZZZ-
25BZ-A.
4 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-XX-
01ZZZ-667Z-A.
5 Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
6 Repair the paint coating in accordance with Ref. ASR A350-A-51-75-12-
00ZZZ-660Z-A.
7 Obtain alternative and substitute fastener data in accordance with Ref. ASR
A350-A-51-43-XX-01ZZZ-667Z-A.

### Page 49

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 49
8 If alternative and substitute fasteners have to be used, you must make
sure that the associated nut/collar are compatible in accordance with Ref.
ASR A350-A-51-4X-XX-01ZZZ-667Z-A.
9 If the length of any fastener specified in this Service Bulletin does not meet
installation standards given in ASR Data Module 51-4, then a fastener of
the same specification, or an approved substitute, with a length which
meets the installation standards given in ASR Data Module 51-4 may be
used.
(b) Do the installation procedure of the Access Panel 198HS as specified in the
Installation of Access Panel 198HS, refer to Ref. MP A350-A-53-35-76-1VZZZ-
720Z-A and Ref. Fig.BH Panel 198HS Installation.
1 PANEL ASSY-198HS V5338834800800 Item 4

### Page 50

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP069-A-FAPE3-05Z0G-A-001-01 Fig.BH Sol.AA SHEET 1/1
REV 00 Jun 28/21 A350-53-P069Panel 198HS Installation
Page 50
CONF 001
A
Z190
Z198
A
B
FR69 FR68
B
4
ICN-A350-A-53XXP069-A-FAPE3-05Z0G-A-001-01

### Page 51

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 51
(8) Task A350-A-53-XX-P069-02001-720A-A (A350-A-53-XX-P069-02ZZZ-720Z-A)
Install RAT Door 198PR
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
198
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Airframe
Material necessary to do the job
Part kit 53P069C01R04
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 V5248638102000 1 DOOR
Referenced Information
Manuals/Drawings References/Sheets
ASR
A350-A-51-24-XX-01ZZZ-667Z-A
A350-A-51-42-XX-01ZZZ-667Z-A
A350-A-51-43-XX-01ZZZ-667Z-A
A350-A-51-4X-XX-01ZZZ-667Z-A
A350-A-51-75-12-00ZZZ-660Z-A
MP A350-A-20-51-50-01ZZZ-25BZ-AA350-A-52-46-73-00ZZZ-720Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
3 For Standard Mechanical T orques, refer to Ref. MP A350-A-20-51-50-01ZZZ-
25BZ-A.
4 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-XX-
01ZZZ-667Z-A.
5 Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
6 Repair the paint coating in accordance with Ref. ASR A350-A-51-75-12-
00ZZZ-660Z-A.
7 Obtain alternative and substitute fastener data in accordance with Ref. ASR
A350-A-51-43-XX-01ZZZ-667Z-A.
8 If alternative and substitute fasteners have to be used, you must make
sure that the associated nut/collar are compatible in accordance with Ref.
ASR A350-A-51-4X-XX-01ZZZ-667Z-A.

### Page 52

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 52
9 If the length of any fastener specified in this Service Bulletin does not meet
installation standards given in ASR Data Module 51-4, then a fastener of
the same specification, or an approved substitute, with a length which
meets the installation standards given in ASR Data Module 51-4 may be
used.
(b) Do the installation procedure as specified in the Installation of RAT Door 198PR,
refer to Ref. MP A350-A-52-46-73-00ZZZ-720Z-A and Ref. Fig.BE RAT Door Panel
198PR Installation.
NOTE: Do not install the Cotter Pin, item 37, until Ref. T ask A350-A-53-XX-P069-
01ZZZ-270Z-A.
NOTE: Do not do the Adjustment of the RAT Door until Ref. T ask A350-A-53-XX-
P069-01ZZZ-270Z-A.
1 DOOR ASSY-198PR V5248638102000 Item 1

### Page 53

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP069-A-FAPE3-05ZEH-A-001-01 Fig.BE Sol.AA SHEET 1/3
REV 00 Jun 28/21 A350-53-P069RAT Door Panel 198PR Installation
Page 53
CONF 001
A
Z190
FR65
FR69 198QR
198PR
FR40
Z198
1
FWD
VIEW LOOKING DOWN
NOTE:
DOOR IN CLOSED POSITION01
01
B
A
B198PR
ICN-A350-A-53XXP069-A-FAPE3-05ZEH-A-001-01

### Page 54

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP069-A-FAPE3-05ZER-A-002-01 Fig.BE Sol.AA SHEET 2/3
REV 00 Jun 28/21 A350-53-P069RAT Door Panel 198PR Installation
Page 54
CONF 001
NOTE:
DOOR IN OPEN POSITION02
02
VIEW LOOKING UP
C
D
ICN-A350-A-53XXP069-A-FAPE3-05ZER-A-002-01

### Page 55

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP069-A-FAPE3-05ZES-A-002-01 Fig.BE Sol.AA SHEET 3/3
REV 00 Jun 28/21 A350-53-P069RAT Door Panel 198PR Installation
Page 55
CONF 001
F
W
D
(37)
D
A
A
A A
ICN-A350-A-53XXP069-A-FAPE3-05ZES-A-002-01

### Page 56

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 56
CONF 002
(8) Task A350-A-53-XX-P069-02002-720A-A (A350-A-53-XX-P069-02ZZZ-720Z-A)
Install RAT Door 198PR
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
198
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Airframe
Material necessary to do the job
Part kit 53P069C04R01
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 V5248638102000 1 DOOR
Referenced Information
Manuals/Drawings References/Sheets
ASR
A350-A-51-24-XX-01ZZZ-667Z-A
A350-A-51-42-XX-01ZZZ-667Z-A
A350-A-51-43-XX-01ZZZ-667Z-A
A350-A-51-4X-XX-01ZZZ-667Z-A
A350-A-51-75-12-00ZZZ-660Z-A
MP A350-A-20-51-50-01ZZZ-25BZ-AA350-A-52-46-73-00ZZZ-720Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
3 For Standard Mechanical T orques, refer to Ref. MP A350-A-20-51-50-01ZZZ-
25BZ-A.
4 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-XX-
01ZZZ-667Z-A.
5 Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
6 Repair the paint coating in accordance with Ref. ASR A350-A-51-75-12-
00ZZZ-660Z-A.
7 Obtain alternative and substitute fastener data in accordance with Ref. ASR
A350-A-51-43-XX-01ZZZ-667Z-A.

### Page 57

A350
SERVICE BULLETIN
REV 00 Jun 28/21 A350-53-P069
Page 57
8 If alternative and substitute fasteners have to be used, you must make
sure that the associated nut/collar are compatible in accordance with Ref.
ASR A350-A-51-4X-XX-01ZZZ-667Z-A.
9 If the length of any fastener specified in this Service Bulletin does not meet
installation standards given in ASR Data Module 51-4, then a fastener of
the same specification, or an approved substitute, with a length which
meets the installation standards given in ASR Data Module 51-4 may be
used.
(b) Do the installation procedure as specified in the Installation of RAT Door 198PR,
refer to Ref. MP A350-A-52-46-73-00ZZZ-720Z-A and Ref. Fig.BE RAT Door Panel
198PR Installation.
NOTE: Do not install the Cotter Pin, item 37, until Ref. T ask A350-A-53-XX-P069-
01ZZZ-270Z-A.
NOTE: Do not do the Adjustment of the RAT Door until Ref. T ask A350-A-53-XX-
P069-01ZZZ-270Z-A.
1 DOOR ASSY-198PR V5248638102000 Item 1

### Page 58

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP069-A-FAPE3-05ZEH-A-001-01 Fig.BE Sol.AA SHEET 1/3
REV 00 Jun 28/21 A350-53-P069RAT Door Panel 198PR Installation
Page 58
CONF 002
A
Z190
FR65
FR69 198QR
198PR
FR40
Z198
1
FWD
VIEW LOOKING DOWN
NOTE:
DOOR IN CLOSED POSITION01
01
B
A
B198PR
ICN-A350-A-53XXP069-A-FAPE3-05ZEH-A-001-01

### Page 59

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP069-A-FAPE3-05ZER-A-002-01 Fig.BE Sol.AA SHEET 2/3
REV 00 Jun 28/21 A350-53-P069RAT Door Panel 198PR Installation
Page 59
CONF 002
NOTE:
DOOR IN OPEN POSITION02
02
VIEW LOOKING UP
C
D
ICN-A350-A-53XXP069-A-FAPE3-05ZER-A-002-01

### Page 60

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP069-A-FAPE3-05ZES-A-002-01 Fig.BE Sol.AA SHEET 3/3
REV 00 Jun 28/21 A350-53-P069RAT Door Panel 198PR Installation
Page 60
CONF 002
F
W
D
(37)
D
A
A
A A
ICN-A350-A-53XXP069-A-FAPE3-05ZES-A-002-01

The text continues at https://openairdocs.org/service-documents/airbus/53-p069-00/file/ebf64cb9a881.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
