# Airbus Service Bulletin A300-53-6125

Copy: Revision 04 ("SB A300-53-6125 Rev 4"), 77 pages: PDF https://openairdocs.org/files/sha256/9d/bd/9dbd8a4268fb032ef1f2250400830f88cdf8230c1042ea394077757ab979650b; text https://openairdocs.org/service-documents/airbus/a300-53-6125/file/9dbd8a4268fb.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2016-0451; AD 2017-18-17 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A300-53-6125
- Latest revision known: A300-53-6125, Revision 04, dated March 17, 2015 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/a300-53-6125

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2017-18-17](https://openairdocs.org/ad/2017-18-17.md), effective Oct 19, 2017: Revisions 01, 02, 03 and 04
- [AD 2004-23-20](https://openairdocs.org/ad/2004-23-20.md), effective Jan 3, 2005: Revision 01

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a300-53-6125/proposed.md), [2 difficulty reports](https://openairdocs.org/service-documents/airbus/a300-53-6125/reports.md).

## Text (77 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2016-0451; AD 2017-18-17 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 53
TITLE: FUSELAGE - CENTER FUSELAGE - REINFORCE UPPER FRAME FEET
FITTINGS.
MODIFICATION No.: 12168S21823 12977S22524
This page transmits Revision No.04 of Service Bulletin No.A300-53-6125
ADDITIONAL WORK
**CONF ALL
No additional work is required by this revision for aircraft modified by any previous issue.
REASON
Revision No. 04 issued to:
- update the threshold for the accomplishment timescale,
- remove cross-references to Service Bulletin No. A300-53-6122 in order to replace them by
the Task Airworthiness Limitation Items (ALI) 53-15-58 which cancel Service Bulletin No.
A300-53-6122.
CHANGES
The main changes of this revision are:
- Task Airworthiness Limitation Items (ALI) 53-15-58 added,
- Service Bulletin No. A300-53-6122 deleted,
- Threshold updated.
SUMMARY
REASON/DESCRIPTION/OPERATIONAL
CONSEQUENCES
REASON UPDATED
 R
GENERAL EVALUATION
 GENERAL EVALUATION TABLE UPDATED
 R
MATERIAL PRICE INFORMATION
 MATERIAL PRICE INFORMATION TABLE
UPDATED
R
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
EFFECTIVITY
 OPERATOR LIST UPDATED
 R
REFERENCES / REPERCUSSIONS
 REFERENCES/REPERCUSSIONS TABLE
UPDATED
R
PLANNING INFORMATION
EFFECTIVITY
 EFFECTIVITY RELATED INFORMATION
UPDATED
R
Configuration definition
 CONFIGURATION LIST UPDATED
 R
CONF 001
 CONFIGURATION DEFINITION UPDATED
 R
Material Effectivity
 MATERIAL EFFECTIVITY UPDATED
 R
REASON
 REASON UPDATED
 R
History
 HISTORY UPDATED
 R
Objective/Action
 OBJECTIVE/ACTION UPDATED
 R
Advantages
 ADVANTAGES UPDATED
 R
COMPLIANCE
Accomplishment Timescale
 ACCOMPLISHMENT TIMESCALE UPDATED
 R
REFERENCES
 REFERENCES UPDATED
 R
REFERENCED DOCUMENTATION UPDATED
 R
PUBLICATION AFFECTED
 PUBLICATIONS AFFECTED UPDATED
 R
PUBLICATIONS AFFECTED ADDED
 N
MATERIAL INFORMATION
MATERIAL - PRICE AND AVAILABILITY
 MATERIAL - PRICE AND AVAI LABILITY UPDATED
 R
Procurement Addresses
 PROCUREMENT ADDRESSES UPDATED
 R
Price and Availability
 PRICE AND AVAILABILITY UPDATED
MATERIAL AVAILABILITY UPDATED
MATERIAL PRICE UPDATED
MATERIAL SET UPDATED
R
LIST OF COMPONENTS
Kit 536125A01R01
 PART MATERIAL SET UPDATED
QUANTITY UPDATED
R
LIST OF MATERIALS - OPERATOR
SUPPLIED
Consumable Materials
Consumable CMLA01
 CONSUMABLE MATERIAL SET UPDATED
CONSUMABLE UPDATED
R
Components
 COMPONENTS UPDATED
 R
Component COMPA01
 PART MATERIAL SET UPDATED
 R
TOOLING
Tools
 TOOLS UPDATED
 R
ACCOMPLISHMENT INSTRUCTIONS
TASK 536125- 831-801-001-
MODIFICATION
TASK SOLUTION UPDATED
NOTE UPDATED
CAUTION UPDATED
R
Subtask 536125-910-001-001
 SUBTASK SOLUTION UPDATED
CONSUMABLE UPDATED
REFERENCED DOCUMENTATION UPDATED
MATERIAL LIST UPDATED
REFERENCES UPDATED
R
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Subtask 536125-839-002-001
 SUBTASK SOLUTION ADDED
 N
Subtask 536125-839-001-001
 SUBTASK SOLUTION DELETED FOR
APPLICABLE MSN
D
Subtask 536125-941-002-001
 SUBTASK SOLUTION UPDATED
NOTE UPDATED
REFERENCED DOCUMENTATION UPDATED
PANEL UPDATED
ZONE UPDATED
R
Subtask 536125-831-004-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 536125-831-005-001
 SUBTASK SOLUTION UPDATED
NOTE UPDATED
R
Subtask 536125-831-006-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 536125-831-007-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 536125-831-008-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 536125-831-009-001
 SUBTASK SOLUTION UPDATED
NOTE UPDATED
R
Subtask 536125-831-010-001
 SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
R
Subtask 536125-942-019-001
 SUBTASK SOLUTION UPDATED
PANEL UPDATED
REFERENCED DOCUMENTATION UPDATED
R
Fig. A-FCAAA
Fig. A-FCAAA Sheet 02
 SHEET UPDATED
 R
Fig. A-FCAAA Sheet 03
 SHEET UPDATED
 R
Fig. A-FCBAA
Fig. A-FCBAA Sheet 01
 SHEET UPDATED
 R
FILING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete document.
Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
HISTORY OF PREVIOUS REVISIONS
Revision No. 01 issued to update the thresholds and modify the content following validation on aircraft
MSN 0521 and to inform that this Service Bulletin is anticipated to be rendered mandatory.
This Service Bulletin has been validated on A300-600 aircraft MSN 0521.
Revision No. 02 issued to inform the operators that this Service Bulletin is rendered mandatory
and to take into account the different configurations from repair solution currently given in ISB
A300-53-6122 and modification No. 12977S22524 (CENTER FUSELAGE - REINFORCE FRAME
BASE/ARCHJUNCTIONS).
Revision No. 03 issued to :
modify the thresholds value and the grace period,
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
delete the Config. 002 and Kit 536125A02R00 (MSN 0252 scrapped),
update the effectivity.
REVISION SEQUENCE
ORIGINAL: Nov 08/00
REVISION No.: 02 - Feb 25/05
REVISION No. : 03 - Sep 13/11
REVISION No. : 04 - Mar 17/15
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A300-600
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 53
TITLE: FUSELAGE - CENTER FUSELAGE - REINFORCE UPPER FRAME FEET
FITTINGS.
**CONF ALL
MODIFICATIONS
MODIFICATION CLASSIFICATION
MAJOR
 12168S21823
MINOR
 12977S22524
NOTE
: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting the
airworthiness of the product. All other changes are major changes.
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
During inspection in accordance with Airworthiness Limitation Items (ALI) 53-15-54 on A300-600
aircraft,
 Frame 43, Frame 44, Frame 45 and Frame 46 were found cracked between stringers 24 to 30
on the aircraft right hand side and
 Frame 45 was found cracked on the aircraft left hand side. At the
time of inspection, the aircraft had accumulated 26,100 Flight Cycles (FC) and 32,160 Flight Hours
(FH).
On in-service aircraft, undetected cracks can lead to the rupture of the frame foot and subsequent
cracking of the adjacent frames and fuselage skin which would require an extensive repair and could
have an impact on pressure loading strength capacity of the structure.
This Service Bulletin requires performing expansion of the most fatigue sensitive fastener holes
between
 Frame 41
 and Frame 46
 on the center box, upper fuselage bent sections, to improve the
fatigue life of the area.
For information, when this Service Bulletin No. A300-53-6125 is not accomplished, inspections are
required as per Airworthiness Limitation Items (ALI) 53-15-58. Previous inspections from Service
Bulletin No.
 A300-53-6122 are cancelled and superseded by Airworthiness Limitation Items (ALI)
53-15-58
.
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A300-600
SERVICE BULLETIN
SUMMARY
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 ETOPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 NO
VALIDATION ON AIRCRAFT
 YES
NOTE
 (1)
: Service Bulletin must be accomplished.
NOTE
: This Service Bulletin has been validated at original issue on A300-600 aircraft with
Manufacturer Serial Number (MSN) 0521.
MATERIAL PRICE INFORMATION
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Kit 536125A01R01
 2
 28,100.00
 Bolt, Pin, Collar, Nut
Supplementary kit
536125A01S01
2
 17,500.00
 Bolt, Pin, Collar, Nut
TOTAL
 45,600.00
Component COMPA01
 2
 See SB
 Nut
EFFECTIVITY
This Service Bulletin is applicable to this (these) operator(s) :
06P
 67Q
 ABR
 AHK
 BCS
 F2I FDX IRA IRM KAC MNB MRJ
 MSR
SUD TAR THA UQA
 URS
 UTP
 UZB
CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU
 None
OEB
 None
AOT
 None
SIL
 51-012
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 NO
HARD
 NO
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A300-600
SERVICE BULLETIN
SUMMARY
SOFT
 NO
OBRM
 NO
MANPOWER
Task 536125-831-801-001: MODIFICATION
TOTAL MANHOURS
 83.50
ELAPSED TIME (HOURS)
 49.00
APPENDICES
None
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A300-600
SERVICE BULLETIN
SUMMARY
**CONF ALL
A
A
FR41
FR46
D_SB_536125_5_SAAA_01_00
Figure A-FSAAA - Sheet 01
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A300-600
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 53
TITLE: FUSELAGE - CENTER FUSELAGE - REINFORCE UPPER FRAME FEET
FITTINGS.
MODIFICATION No.: 12168S21823 12977S22524
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
NOTE
: Modification No. 12168S21823 is embodied before delivery on aircraft with
Manufacturer Serial Number (MSN)
 0805 and subsequent.
NOTE
: Modification No. 12977S22524 is applicable by Service Bulletin only.
(1) Models
B4-603 B4-605R B4-620 B4-622 B4-622R C4-605R/F C4-620 F4-605R
(2) Effectivity by MSN
0294 0344 0358 0361 0365 0380 0388 0401 0405 0408 0411 0414 0417 0477 0479
0505
 0521 0525 0529-0530 0532 0536 0543 0546 0553
 0555
 0557-0559
 0561
 0563
0572 0575 0579 0581
 0584 0602-0603
 0607-0608
 0611
 0613
 0617-0618
 0621 0623
0625-0626
 0629-0630
 0632-0633
 0637 0641 0643 0657 0659 0664 0666 0668 0670
0673 0677 0679 0683 0688 0694 0696 0699 0701 0703 0707 0709 0711 0713 0715
0717 0719 0721-0730
 0732-0746
 0748-0750
 0752-0764 0766
 0768-0775
 0777-0794
0797 0799-0804
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A300-600
SERVICE BULLETIN
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
06P
 0788
67Q
 0584
 0603
 0744
 0749
 0764
ABR
 0677 0743
AHK
 0683
 0770
BCS
 0602
 0617
 0621
 0637 0641 0670
 0679
 0703
 0711 0724 0729 0730
0737
 0740
 0753 0783
 0797
F2I
 0294
 0529
 0557
FDX
 0358 0361 0365 0388 0417 0477 0479 0530 0536 0543 0555 0559
0572 0575 0579 0581 0611 0613 0625 0630 0633 0657 0659 0664
0668 0688 0709 0713 0715 0726 0728 0735 0736 0738 0742 0745
0748 0752 0757 0759 0760 0761 0766 0768 0769 0771 0772 0774
0777 0778 0779 0780 0781 0789 0790 0791 0792 0793 0794 0799
0800 0801 0802 0803 0804
IRA
 0632 0696 0723 0727
IRM
 0380 0401 0405 0408 0411 0414 0546 0553 0608 0618 0623 0701
0773
KAC
 0344 0673 0694 0699 0719 0721
MNB
 0521
 0525
 0532
 0734
 0739
 0755 0756
 0758
MRJ
 0750
 0762
MSR
 0561 0607
SUD
 0666 0775
TAR
 0505 0558 0563
THA
 0629 0782 0784 0785 0786 0787
UQA
 0626
 0643
URS
 0733
UTP
 0707
 0725
 0732
 0741
 0746
 0754
 0763
UZB
 0717 0722
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A300-600
SERVICE BULLETIN
(4) Configuration by MSN
MSN
 CONFIGURATION
0294 0344 0358 0361 0365 0380 0388 0401 0405 0408 0411
0414 0417 0477 0479 0505 0521 0525 0529 0530 0532 0536
0543 0546 0553 0555 0557 0558 0559 0561 0563 0572 0575
0579 0581 0584 0602 0603 0607 0608 0611 0613 0617 0618
0621 0623 0625 0626 0629 0630 0632 0633 0637 0641 0643
0657 0659 0664 0666 0668 0670 0673 0677 0679 0683 0688
0694 0696 0699 0701 0703 0707 0709 0711 0713 0715 0717
0719 0721 0722 0723 0724 0725 0726 0727 0728 0729 0730
0732 0733 0734 0735 0736 0737 0738 0739 0740 0741 0742
0743 0744 0745 0746 0748 0749 0750 0752 0753 0754 0755
0756 0757 0758 0759 0760 0761 0762 0763 0764 0766 0768
0769 0770 0771 0772 0773 0774 0775 0777 0778 0779 0780
0781 0782 0783 0784 0785 0786 0787 0788 0789 0790 0791
0792 0793 0794 0797 0799 0800 0801 0802 0803 0804
001
(5) Configuration definition
**CONF 001
Config. 001 is valid for all the aircraft given in the effectivity of this Service Bulletin as a
standard configuration.
(6) Material Effectivity
MATERIAL
 QTY PER A/C
 SEE NOTES
Kit 536125A01R01
 2
Supplementary kit 536125A01S01
 2
Component COMPA01
 2
Consumable CMLA01
 1
This table shows the supplemental kits (S kits) needed to update the kits already held in
your stock to the latest status.
Kit Held by Operator
 Supplementary Kits
Required
Latest Status of Kit
536125A01R00
 536125A01S01
 536125A01R01
536125A01R01
 NONE
 536125A01R01
B. CONCURRENT REQUIREMENTS
None
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A300-600
SERVICE BULLETIN
C. REASON
(1) History
During inspection in accordance with Airworthiness Limitation Items (ALI) 53-15-54 on
A300-600 aircraft,
 Frame 43, Frame 44, Frame 45 and Frame 46 were found cracked
between stringers 24 to 30 on the aircraft right hand side and
 Frame 45 was found
cracked on the aircraft left hand side. At the time of inspection, the aircraft had
accumulated 26,100 Flight Cycles (FC) and 32,160 Flight Hours (FH).
On in-service aircraft, undetected cracks can lead to the rupture of the frame foot and
subsequent cracking of the adjacent frames and fuselage skin which would require an
extensive repair and could have an impact on pressure loading strength capacity of the
structure.
(2) Objective/Action
This Service Bulletin requires performing expansion of the most fatigue sensitive
fastener holes between
 Frame 41
 and Frame 46
 on the center box, upper fuselage bent
sections, to improve the fatigue life of the area.
(3) Advantages
For information, when this Service Bulletin No. A300-53-6125 is not accomplished,
inspections are required as per Airworthiness Limitation Items (ALI) 53-15-58. Previous
inspections from Service Bulletin No.
 A300-53-6122 are cancelled and superseded by
Airworthiness Limitation Items (ALI) 53-15-58
 .
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
Task 536125-831-801-001: MODIFICATION
(1) Do the Cold Expansion of the Holes on FR41.
(2) Do the Cold Expansion of the Holes on FR42.
(3) Do the Cold Expansion of the Holes on FR43.
(4) Do the Cold Expansion of the Holes on FR44.
(5) Do the Cold Expansion of the Holes on FR45.
(6) Do the Cold Expansion of the Holes on FR46.
(7) Repair the Hole H1 on FR41 thru FR46.
(8) ADDITIONAL KIT (introduced by revision 02 of this Service Bulletin)
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A300-600
SERVICE BULLETIN
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
Accomplishment of this Service Bulletin is mandatory at the following thresholds:
Aircraft model
 THRESHOLD (FC OR FH WHICHEVER OCCURS FIRST)
Flight Cycles
 Flight Hours
A300-600 AFT>1.5FH/FC
 10200
 22100
A300-600 AFT<=1.5FH/FC
 11000
 16600
Table 1
NOTE
: AFT: Average Flight Time
This Service Bulletin has been classified Mandatory by the issue of an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA). The AD must
be used as the reference document for the mandated accomplishment timescale.
No more maintenance action in the area covered by this Service Bulletin are necessary
up to:
Aircraft model
 THRESHOLD FROM THIS SB EMBODIED (FC OR FH
WHICHEVER OCCURS FIRST)
Flight Cycles
 Flight Hours
A300-600 Every AFT
 27100
 47300
Table 2
NOTE
: AFT: Average Flight Time
NOTE
: Not exceeding this threshold, it is necessary to perform modification
Service Bulletin No. A300-53-6178 to reach Limit Of Validity (LOV) of the
aircraft.
F. APPROVAL
The technical content of this document is approved under authority of Design Organization
Approval No. EASA.21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 5
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A300-600
SERVICE BULLETIN
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
Task 536125-831-801-001: MODIFICATION
Get Access
 4.00
On Aircraft
Do the Cold Expansion of the Holes on FR41.
 9.00
Do the Cold Expansion of the Holes on FR42.
 9.00
Do the Cold Expansion of the Holes on FR43.
 10.00
Do the Cold Expansion of the Holes on FR44.
 10.00
Do the Cold Expansion of the Holes on FR45.
 9.00
Do the Cold Expansion of the Holes on FR46.
 9.00
Repair the Hole H1 on FR41 thru FR46.
 18.00
ADDITIONAL KIT (introduced by revision 02 of this
Service Bulletin)
1.00
Close-Up
 4.50
TOTAL MANHOURS
 83.50
ELAPSED TIME (HOURS)
 49.00
H. WEIGHT AND BALANCE
Not Changed
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
Airworthiness Limitation Item (ALI)
 Airworthiness Limitation Items (ALI)
53-15-54
Airworthiness Limitation Items (ALI)
53-15-58
Aircraft Maintenance Manual (AMM)
 06-21-00
 06-31-53
 06-41-00
20-21-12
 24-00-00 25-21-00
25-22-11 25-23-31 25-58-22
52-10-00
Consumable Material List (CML)
Elec. Std. Practices Manual (ESPM)
 20-55-00
Non Destructive Test Manual (NTM)
 53-15-54
Service Bulletin (SB)
 A300-53-6122
A300-53-6178
Standards Manual (SM)
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 6
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A300-600
SERVICE BULLETIN
Structural Repair Manual (SRM)
 51-23-00 51-40-00
 51-40-20
51-40-30
 51-40-40
 51-40-41
51-43-00 51-75-10
K. PUBLICATION AFFECTED
Airworthiness Limitation Item (ALI)
 Airworthiness Limitation Items (ALI)
53-15-58
Maintenance Planning Document (MPD)
 531558-01-1
L. INTERCHANGEABILITY/MIXABILITY
Not Applicable
M. SPARES
None
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 7
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A300-600
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 8
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A300-600
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
Customers with aircraft shown in the effectivity of this Service Bulletin should send a
purchase order to AIRBUS. Quote the number of this Service Bulletin. The address is:
Kit 536125A01R01
Supplementary kit 536125A01S01
AIRBUS Material, Logistics and Suppliers
Weg beim Jaeger 150
D-22335 HAMBURG
GERMANY
For ordering by internet:
http://spares.airbus.com
For ordering by fax: +49 40 50 76 2590
For ordering by E-mail: airbus.kit@airbus.com
AIRBUS Material, Logistics and Suppliers do not stock standard hardware as competitive
multiple suppliers ensure access to minimum prices. AIRBUS recommends Customers
with aircraft shown in the effectivity of this Service Bulletin to send a purchase order to
B/E Aerospace. The address is:
Component COMPA01
 B/E AEROSPACE INC.
CONSUMABLES MANAGEMENT
10000 NW 15th Terrace Miami
FL 33172
USA
Tel EMEA: +49 (0) 40 822 285 31500
Tel US: +1 305 925 2600
Tel ASIA: +1 310 900 1300
Fax EMEA: +49 (0) 40 822 285 31010
Fax US: +1 305 507 7191
Fax ASIA: +1 310 819 1200
SITA: MIAMMCR
E-Mail: AOGdesk_CMG@beaerospace.com
internet: http://www.beconsumables.com
or, alternatively any other source on the open
market.
(2) Price and Availability
This table shows the supplemental kits (S kits) needed to update the kits already held in
your stock to the latest status.
Kit Held by Operator
 Supplementary Kits Required
 Latest Status of Kit
536125A01R00
 536125A01S01
 536125A01R01
536125A01R01
 NONE
 536125A01R01
NOTE
: Kit 536125A01R01 does not require an Supplementary kit
536125A01S01 because Supplementary kit 536125A01S01 is included in
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 9
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A300-600
SERVICE BULLETIN
Kit 536125A01R01.
Kit 536125A01R01
Cost
 14,050.00
 USD
Availability
 180 calendar days from receipt of order
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning schedule
with your order so that we can try to comply with your requirements.
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained through the
AirbusSpares portal or through a request for quotation to airbus.kit@airbus.com.
Supplementary kit 536125A01S01
Cost
 8,750.00
 USD
Availability
 120 calendar days from receipt of order
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning schedule
with your order so that we can try to comply with your requirements.
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained through the
AirbusSpares portal or through a request for quotation to airbus.kit@airbus.com.
Component
 COMPA01
Operator supplied standard hardware parts required to accomplish this Service Bulletin,
are to be supplied from the operator’s stock.
B. INDUSTRY SUPPORT INFORMATION
AIRBUS will not provide industry support for accomplishment of this Service Bulletin.
C. LIST OF COMPONENTS
Kit 536125A01R01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
1
 ASNA2027V5-7
 24
 Bolt
2
 ASNA2027V5-8
 12
 Bolt
3
 ASNA2529-5
 50
 Nut
4
 NSA5330-8
 62
 Collar
5
 NSA5330-10
 12
 Collar
6
 NSA5359-4-7
 30
 Pin
7
 NSA5359-4-8
 18
 Pin
8
 NSA5359-5-7
 4
 Pin
9
 ASNA2027V5-6
 14
 Bolt
10
 NSA5359-4-6
 26
 Pin
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 10
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A300-600
SERVICE BULLETIN
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
11
 NSA5359-5-6
 4
 Pin
12
 NSA5359-5-8
 4
 Pin
30
 NSA5351V6-7
 4
 Pin
31
 NSA5330-12
 12
 Collar
32
 NSA5351V6-6
 4
 Pin
33
 NSA5351V6-8
 4
 Pin
34
 ASNA2027V4-8
 6
 Bolt
35
 ASNA2027V4-10
 6
 Bolt
36
 NSA5359-4-5
 6
 Pin
NOTE
: If you find part numbers of hardware components in the related kit(s) which
you cannot identify in the LIST OF COMPONENTS of this Service Bulletin,
refer to Standards Manual (SM). The SM will give you the correct part number
to part number relationship.
Supplementary kit 536125A01S01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
4
 NSA5330-8
 6
 Collar
6
 NSA5359-4-7
 4
 Pin
7
 NSA5359-4-8
 4
 Pin
10
 NSA5359-4-6
 10
 Pin
30
 NSA5351V6-7
 4
 Pin
31
 NSA5330-12
 12
 Collar
32
 NSA5351V6-6
 4
 Pin
33
 NSA5351V6-8
 4
 Pin
34
 ASNA2027V4-8
 6
 Bolt
35
 ASNA2027V4-10
 6
 Bolt
36
 NSA5359-4-5
 6
 Pin
NOTE
: If you find part numbers of hardware components in the related kit(s) which
you cannot identify in the LIST OF COMPONENTS of this Service Bulletin,
refer to Standards Manual (SM). The SM will give you the correct part number
to part number relationship.
D. LIST OF MATERIALS - OPERATOR SUPPLIED
(1) Consumable Materials
Consumable CMLA01
ITEM
 DESCRIPTION
 REFERENCE TO CML
MAT. No.
QTY PER A/C
 SEE
NOTES
Primer Polyurethane Paint-
Corrosion Inhibiting
04EAC2
 As required
Top Coat Polyurethane-Grey
Internal Structure
04JME4
 As required
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 11
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A300-600
SERVICE BULLETIN
ITEM
 DESCRIPTION
 REFERENCE TO CML
MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner-General
 08BAA9
 As required
(2) Components
Component COMPA01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
40
 ASNA2531-4
 6
 NUT
NOTE
: If you find part numbers of hardware components in the related kit(s)
which you cannot identify in the LIST OF COMPONENTS of this Service
Bulletin, refer to Standards Manual (SM). The SM will give you the
correct part number to part number relationship.
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE
: The components listed above are only necessary if a bush has been
installed during the Inspection Service Bulletin No.A300-53-6122. The
quantity of these items are to be ordered as required.
(3) Equipment
None
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
F. TOOLING
(1) Tooling - Price and Availability
None
(2) Tools
To accomplish this Service Bulletin it is necessary to use the tools listed in the
subsequent referenced AMM and/or NTM tasks:
- Equipment and materials for check of the holes as per NTM 53-15-54 Part. 6.
Fatigue Technology Incorporated (FTI) has allocated tool kit number FTI-A300-53-6125-1
for accomplishment of this Service Bulletin. Operators interested in obtaining the FTI tool
kit should contact:
Fatigue technology Inc.
401 Andover Park East
Seattle, WA USA
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 12
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A300-600
SERVICE BULLETIN
98188-7605
E-mail : sales@fatiguetech.com
Web site: www.fatiguetech.com
Phone : (1) 206 246 2010
Phax : (1) 206 244 9886
(3) Special Tools
None
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 13
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A300-600
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 14
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A300-600
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 536125-831-801-001 - MODIFICATION
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS :
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC; AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION REFER TO
 ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
"refer to" are used and the operator has a procedure accepted by the local
authority he belongs to, the accepted alternative procedure can be used. When the
words "in accordance with" are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. Other paragraphs are recommended and may be deviated
from, done as part of other actions or done with accepted methods different from
those given in the Service Bulletin, as long as the RC paragraphs can be done and
the aircraft can be put back into a serviceable condition.
Task Associated Data
Zone
241 242
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 15
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A300-600
SERVICE BULLETIN
Manpower
TOTAL MANHOURS
 83.50
ELAPSED TIME (HOURS)
 49.00
A. GENERAL
(1) Subtask 536125-910-001-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
Material necessary to do the job
Consumable CMLA01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Primer Polyurethane Paint-
Corrosion Inhibiting
04EAC2
 As required
Top Coat Polyurethane-
Grey Internal Structure
04JME4
 As required
Non Aqueous Cleaner-
General
08BAA9
 As required
References
Aircraft Maintenance Manual (AMM)
 06-21-00, Page Block 001
06-31-53, Page Block 001
06-41-00, Page Block 001
20-21-12, Page Block 001
Consumable Material List (CML)
Standards Manual (SM)
Structural Repair Manual (SRM)
 51-23-00
51-40-00
51-40-20
51-40-30
51-40-40
51-40-41
51-43-00
51-75-10
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-21-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-00, Page Block 001.
(d) For the specification of the materials (Mat. No.) given in this Service Bulletin, refer
to the Consumable Material List (CML).
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 16
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A300-600
SERVICE BULLETIN
(e) Refer to the AIRBUS Standards Manual (SM) if you find part numbers for the
hardware components in the related kit(s) which you cannot identify in the LIST OF
COMPONENTS of this Service Bulletin. The SM will give you the correct part
number to part number relationship.
(f) Use a non-metallic spatula to remove the sealant and clean the areas with:
Non Aqueous
Cleaner-General
08BAA9
 As required
(g) Remove and install fasteners in accordance with
 SRM 51-40-20.
(h) Obtain fastener hole diameters and drill data in accordance with SRM 51-40-40.
(i) Do the cold expansion of the fastener holes in accordance with
 SRM 51-40-41.
(j) Obtain alternative and substitute fastener data in accordance with SRM 51-40-30.
(k) Renew the protective finish in accordance with SRM 51-75-10 with:
Primer
Polyurethane Paint-
Corrosion Inhibiting
04EAC2
 As required
Top Coat
Polyurethane-Grey
Internal Structure
04JME4
 As required
(l) Obtain alternative and substitute fastener data in accordance with SRM 51-40-30
 .
(m) To torque tighten the standard threaded fasteners, refer to AMM 20-21-12, Page
Block 001.
(n) If alternative and substitute fasteners have to be used, you must make sure that the
associated nut/collar are compatible in accordance with SRM 51-40-00 "Mating
Part" column.
(o) If the length of any fastener specified in this Service Bulletin does not meet
installation standards given in SRM Chapter 51, then a fastener of the same
specification, or an approved substitute, with a length which meets the installation
standards given in SRM Chapter 51 may be used. In addition, washers may be
installed for fastener grip length in accordance with SRM Chapter 51.
(2) Subtask 536125-839-002-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 17
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A300-600
SERVICE BULLETIN
B. PREPARATION
(1) Subtask 536125-941-002-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 24-00-00, Page Block 301
25-21-00, Page Block 401
25-22-11, Page Block 401
25-23-31, Page Block 401
25-58-22, Page Block 401
52-10-00
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
- Aircraft electrical network de-energized
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position
(a) Make sure that the aircraft is electrically grounded, refer to AMM 24-00-00 Page
Block 301.
(b) Put an access platform in position at zones 241 and 242.
(c) Except for freighter, between Frame 41
 and Frame 46, remove the passengers
seats, refer to
 AMM 25-21-00 Page Block 401.
(d) Except for freighter, between Frame 41
 and Frame 46, remove the passenger-
compartment lining-panels, refer to
 AMM 25-23-31 Page Block 401.
(e) For freighter, between Frame 41
 and Frame 46, remove the compartment lining-
panels, refer to
 AMM 25-58-22 Page Block 401.
(f) Between Frame 41
 and Frame 46, remove the heat and sound insulation blankets,
refer to
 AMM 25-22-11 Page Block 401.
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 18
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A300-600
SERVICE BULLETIN
C. PROCEDURE
NOTE
: The description is given for the LH side. The work on the RH side is the
same.
NOTE
: For holes which have been previously repaired with a diameter bigger than
described in this Service Bulletin, please contact AIRBUS SEER for further
instructions and Repair Approval Sheet (RAS).
(1) Subtask 536125-831-004-001 - Do the Cold Expansion of the Holes on FR41.
Work Zones and Access Panels
Zone
 Access/Work location
241
 Work location
 Frame 41
242
 Work location
 Frame 41
Manpower Resources
Manhours
 9.00
Minimum number of person
 1
Subtask elapsed time
 9.00
Skills
 AIRFRAME
NON DESTRUCTIVE
TESTING
Material necessary to do the job
Kit 536125A01R01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 ASNA2027V5-7
 7
 Bolt
3
 ASNA2529-5
 8
 Nut
4
 NSA5330-8
 9
 Collar
5
 NSA5330-10
 2
 Collar
6
 NSA5359-4-7
 8
 Pin
7
 NSA5359-4-8
 1
 Pin
8
 NSA5359-5-7
 2
 Pin
9
 ASNA2027V5-6
 1
 Bolt
10
 NSA5359-4-6
 2
 Pin
30
 NSA5351V6-7
 2
 Pin
31
 NSA5330-12
 2
 Collar
References
Non Destructive Test Manual (NTM)
 53-15-54 Part. 6
Structural Repair Manual (SRM)
 51-40-41
Fig. A-FBAAA
Cold Expansion of the Holes on FR41
(LH and RH Side)
Sheet 01
Sheet 02
Sheet 03
Fig. A-FBGAA
Table of the Expanded Holes
Sheet 01
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 19
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A300-600
SERVICE BULLETIN
NOTE
: For the holes H2 and H3 : if the existing hole is more than 8.732 mm
(0.3437 in.) max. diameter, contact AI.
(a) Remove the fasteners, refer to the table given in
 Fig. A-FBAAA Sheet 01
 , Fig. A-
FBAAA Sheet 02
, Fig. A-FBAAA Sheet 03
 .
(b) Do a check by rotating probe, refer to
 NTM 53-15-54 Part. 6.
NOTE
 (01)
: For the holes 1, 4, 5, 6, 7 and 8:
- If no crack is found go to para. (c) of this Subtask.
- If crack, ream out the crack, step by step, up to a max.
diameter corresponding to 7.260 mm (0.2858 in.).
- If the crack is out of the limits, contact AI.
NOTE
 (02)
: For the holes 2 and 3:
- If no crack is found go to para. (c) of this Subtask.
- If crack, ream out the crack, step by step, up to a max.
diameter corresponding to 8.810 mm (0.3468 in.).
If the initial hole diameter is more than 8.732 mm (0.3437 in.),
contact AI.
- If the crack is out of the limits, contact AI.
If the frame foot is cutout :
NOTE
 (03)
: For the holes 1:
- If no crack is found go to para. (c) of this Subtask.
- If crack, contact AI.
If a bush is installed on the frame :
NOTE
 (04)
: For the holes 1:
- If no crack is found go to SUBTASK 536125-831-010 001
Repair the Hole H1 on FR41 thru FR46. .
- If crack, contact AI.
(c) Ream the holes to the initial hole diameter, then do the cold expansion operation
and ream to the final diameter (Refer to the table given in Fig. A-FBGAA Sheet 01
 ).
Do this in accordance with
 SRM 51-40-41 or use the cold expansion tool KIT FTI-
A300-53-6125-1.
(d) Clean the drilled area.
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 20
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29

@A300-600
SERVICE BULLETIN
(e) Install in the cold expanded holes:
Refer to Fig. A-FBAAA Sheet 01
 , Fig. A-FBAAA Sheet 02
 , Fig. A-FBAAA Sheet 03
1
 For the holes H1:
1 pin NSA5359-4-7 Item 6
or
1 bolt ASNA2027V5-7 Item 1
with
1 collar NSA5330-8 Item 4
or
1 nut ASNA2529-5 Item 3
- If the frame foot is cutout:
1 pin NSA5359-4-6 Item 10
or
1 pins NSA5359-4-7 Item 6
or
1 pin NSA5359-4-8 Item 7
with
1 collar(s) NSA5330-8 Item 4
2
 For the holes H2 and H3:
2 pin NSA5359-4-7 Item 6
or
2 bolt ASNA2027V5-7 Item 1
or
2 pin NSA5359-5-7 Item 8
or
2 pin NSA5351V6-7 Item 30
with
2 collar NSA5330-8 Item 4
or
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 21
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 30

@A300-600
SERVICE BULLETIN
2 nut ASNA2529-5 Item 3
or
2 collar NSA5330-10 Item 5
or
2 collar NSA5330-12 Item 31
3
 For the holes H4, H5, H7 and H8:
4 pin NSA5359-4-7 Item 6
or
4 bolt ASNA2027V5-7 Item 1
with
4 collar NSA5330-8 Item 4
or
4 nut ASNA2529-5 Item 3
4
 For the hole H6:
1 pin NSA5359-4-6 Item 10
or
1 bolt ASNA2027V5-6 Item 9
with
1 collar NSA5330-8 Item 4
or
1 nut ASNA2529-5 Item 3
(f) Renew the protective finish.
(2) Subtask 536125-831-005-001 - Do the Cold Expansion of the Holes on FR42.
Work Zones and Access Panels
Zone
 Access/Work location
241
 Work location
 Frame 42
242
 Work location
 Frame 42
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 22
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 31

@A300-600
SERVICE BULLETIN
Manpower Resources
Manhours
 9.00
Minimum number of person
 1
Subtask elapsed time
 9.00
Skills
 AIRFRAME
NON DESTRUCTIVE
TESTING
Material necessary to do the job
Kit 536125A01R01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 ASNA2027V5-7
 2
 Bolt
3
 ASNA2529-5
 8
 Nut
4
 NSA5330-8
 9
 Collar
5
 NSA5330-10
 2
 Collar
6
 NSA5359-4-7
 3
 Pin
7
 NSA5359-4-8
 1
 Pin
9
 ASNA2027V5-6
 6
 Bolt
10
 NSA5359-4-6
 7
 Pin
11
 NSA5359-5-6
 2
 Pin
31
 NSA5330-12
 2
 Collar
32
 NSA5351V6-6
 2
 Pin
References
Non Destructive Test Manual (NTM)
 53-15-54 Part. 6
Structural Repair Manual (SRM)
 51-40-41
Fig. A-FBBAA
Cold Expansion of the Holes on FR42
(LH and RH Side)
Sheet 01
Sheet 02
Sheet 03
Fig. A-FBGAA
Table of the Expanded Holes
Sheet 01
NOTE
: For the holes H2 and H3: if the existing hole is more than 8.732 mm
(0.3437 in.) max. diameter, contact AI.
(a) Remove the fasteners, refer to the table given in
 Fig. A-FBBAA Sheet 01
 , Fig. A-
FBBAA Sheet 02
, Fig. A-FBBAA Sheet 03
 .
(b) Do a check by rotating probe, refer to
 NTM 53-15-54 Part. 6.
NOTE
 (01)
: For the holes 1, 4, 5, 6, 7 and 8:
- If no crack is found go to para. (c) of this Subtask.
- If crack, ream out the crack, step by step, up to a max.
diameter corresponding to 7.260 mm (0.2858 in.).
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 23
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 32

@A300-600
SERVICE BULLETIN
- If the crack is out of the limits, contact AI.
NOTE
 (02)
: For the holes 2 and 3:
- If no crack is found go to para. (c) of this Subtask.
- If crack, ream out the crack, step by step, up to a max.
diameter corresponding to 8.810 mm (0.3468 in.).
If the initial hole diameter is more than 8.732 mm (0.3437 in.),
contact AI.
- If the crack is out of the limits, contact AI.
If the frame foot is cutout :
NOTE
 (03)
: For the holes 1:
- If no crack is found go to para. (c) of this Subtask.
- If crack, contact AI.
If a bush is installed on the frame:
NOTE
 (04)
: For the holes 1:
- If no crack is found go to SUBTASK 536125-831-010 001
Repair the Hole H1 on FR41 thru FR46. .
- If crack, contact AI.
(c) Ream the holes to the initial hole diameter, then do the cold expansion operation
and ream to the final diameter, refer to the table given in
 Fig. A-FBGAA Sheet 01
 .
Do this in accordance with
 SRM 51-40-41 or use the cold expansion tool KIT FTI-
A300-53-6125-1.
(d) Clean the drilled area.
(e) Install in the cold expanded holes:
Refer to Fig. A-FBBAA Sheet 01
 , Fig. A-FBBAA Sheet 02
 , Fig. A-FBBAA Sheet 03
1
 For the holes H1:
1 pin NSA5359-4-6 Item 10
or
1 bolt ASNA2027V5-6 Item 9
with
1 collar NSA5330-8 Item 4
or
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 24
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 33

@A300-600
SERVICE BULLETIN
1 nut ASNA2529-5 Item 3
- If the frame foot is cutout:
1 pins NSA5359-4-6 Item 10
or
1 pin NSA5359-4-7 Item 6
or
1 pin NSA5359-4-8 Item 7
with
1 collar(s) NSA5330-8 Item 4
2
 For the holes H2 and H3:
2 pin NSA5359-4-6 Item 10
or
2 bolt ASNA2027V5-6 Item 9
or
2 pin NSA5359-5-6 Item 11
or
2 pin NSA5351V6-6 Item 32
with
2 collar NSA5330-8 Item 4
or
2 nut ASNA2529-5 Item 3
or
2 collar NSA5330-10 Item 5
or
2 collar NSA5330-12 Item 31
3
 For the holes H4, H5 and H6:
3 pin NSA5359-4-6 Item 10
or
3 bolt ASNA2027V5-6 Item 9
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 25
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 34

@A300-600
SERVICE BULLETIN
with
3 collar NSA5330-8 Item 4
or
3 nut ASNA2529-5 Item 3
4
 For the holes H7 and H8:
2 pin NSA5359-4-7 Item 6
or
2 bolt ASNA2027V5-7 Item 1
with
2 collar NSA5330-8 Item 4
or
2 nut ASNA2529-5 Item 3
(f) Renew the protective finish.
(3) Subtask 536125-831-006-001 - Do the Cold Expansion of the Holes on FR43.
Work Zones and Access Panels
Zone
 Access/Work location
241
 Work location
 Frame 43
242
 Work location
 Frame 43
Manpower Resources
Manhours
 10.00
Minimum number of person
 1
Subtask elapsed time
 10.00
Skills
 AIRFRAME
NON DESTRUCTIVE
TESTING
Material necessary to do the job
Kit 536125A01R01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 ASNA2027V5-7
 2
 Bolt
3
 ASNA2529-5
 9
 Nut
4
 NSA5330-8
 10
 Collar
5
 NSA5330-10
 2
 Collar
6
 NSA5359-4-7
 3
 Pin
7
 NSA5359-4-8
 1
 Pin
9
 ASNA2027V5-6
 7
 Bolt
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 26
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 35

@A300-600
SERVICE BULLETIN
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
10
 NSA5359-4-6
 8
 Pin
11
 NSA5359-5-6
 2
 Pin
31
 NSA5330-12
 2
 Collar
32
 NSA5351V6-6
 2
 Pin
References
Non Destructive Test Manual (NTM)
 53-15-54 Part. 6
Structural Repair Manual (SRM)
 51-40-41
Fig. A-FBCAA
Cold Expansion of the Holes on FR43
(LH and RH Side)
Sheet 01
Sheet 02
Sheet 03
Fig. A-FBGAA
Table of the Expanded Holes
Sheet 01
NOTE
: For the holes H2 and H3 : if the existing hole is more than 8.732 mm
(0.3437 in.) max. diameter, contact AI.
(a) Remove the fasteners, refer to the table given in
 Fig. A-FBCAA Sheet 01
 ,Fig. A-
FBCAA Sheet 02
,Fig. A-FBCAA Sheet 03
 .
(b) Do a check by rotating probe, refer to
 NTM 53-15-54 Part. 6.
NOTE
 (01)
: For the holes 1, 4, 5, 6, 7, 8 and 9 :
- If no crack is found go to para. (c) of this Subtask.
- If crack, ream out the crack, step by step, up to a max.
diameter corresponding to 7.260mm (0.2858 in.).
- If the crack is out of the limits, contact AI.
NOTE
 (02)
: For the holes 2 and 3 :
- If no crack is found go to para. (c) of this Subtask.
- If crack, ream out the crack, step by step, up to a max.
diameter corresponding to 8.810 mm (0.3468 in.).
If the initial hole diameter is more than 8.732 mm (0.3437 in.),
contact AI.
- If the crack is out of the limits, contact AI.
If the frame foot is cutout :
NOTE
 (03)
: For the holes 1 :
- If no crack is found go to para. (c) of this Subtask.
- If crack, contact AI.
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 27
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 36

@A300-600
SERVICE BULLETIN
If a bush is installed on the frame :
NOTE
 (04)
: For the holes 1 :
- If no crack is found go to SUBTASK 536125-831-010 001
Repair the Hole H1 on FR41 thru FR46. .
- If crack, contact AI.
(c) Ream the holes to the initial hole diameter, then do the cold expansion operation
and ream to the final diameter, refer to the table given in
 Fig. A-FBGAA Sheet 01
 .
Do this in accordance with
 SRM 51-40-41 or use the cold expansion tool KIT FTI-
A300-53-6125-1.
(d) Clean the drilled area.
(e) Install in the cold expanded holes:
Refer to Fig. A-FBCAA Sheet 01
 , Fig. A-FBCAA Sheet 02
 , Fig. A-FBCAA Sheet 03
1
 For the holes H1:
1 pin NSA5359-4-6 Item 10
or
1 bolt ASNA2027V5-6 Item 9
with
1 collar NSA5330-8 Item 4
or
1 nut ASNA2529-5 Item 3
- If the frame foot is cutout:
1 pins NSA5359-4-6 Item 10
or
1 pin NSA5359-4-7 Item 6
or
1 pin NSA5359-4-8 Item 7
with
1 collar(s) NSA5330-8 Item 4
2
 For the holes H2 and H3:
2 pin NSA5359-4-6 Item 10
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 28
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 37

@A300-600
SERVICE BULLETIN
or
2 bolt ASNA2027V5-6 Item 9
or
2 pin NSA5359-5-6 Item 11
or
2 pin NSA5351V6-6 Item 32
with
2 collar NSA5330-8 Item 4
or
2 nut ASNA2529-5 Item 3
or
2 collar NSA5330-10 Item 5
or
2 collar NSA5330-12 Item 31
3
 For the holes H4, H5, H6 and H7:
4 pin NSA5359-4-6 Item 10
or
4 bolt ASNA2027V5-6 Item 9
with
4 collar NSA5330-8 Item 4
or
4 nut ASNA2529-5 Item 3
4
 For the holes H8 and H9:
2 pin NSA5359-4-7 Item 6
or
2 bolt ASNA2027V5-7 Item 1
with
2 collar NSA5330-8 Item 4
or
2 nut ASNA2529-5 Item 3
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 29
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 38

@A300-600
SERVICE BULLETIN
(f) Renew the protective finish.
(4) Subtask 536125-831-007-001 - Do the Cold Expansion of the Holes on FR44.
Work Zones and Access Panels
Zone
 Access/Work location
241
 Work location
 Frame 44
242
 Work location
 Frame 44
Manpower Resources
Manhours
 10.00
Minimum number of person
 1
Subtask elapsed time
 10.00
Skills
 AIRFRAME
NON DESTRUCTIVE
TESTING
Material necessary to do the job
Kit 536125A01R01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 ASNA2027V5-7
 3
 Bolt
2
 ASNA2027V5-8
 6
 Bolt
3
 ASNA2529-5
 9
 Nut
4
 NSA5330-8
 10
 Collar
5
 NSA5330-10
 2
 Collar
6
 NSA5359-4-7
 4
 Pin
7
 NSA5359-4-8
 7
 Pin
10
 NSA5359-4-6
 1
 Pin
12
 NSA5359-5-8
 2
 Pin
31
 NSA5330-12
 2
 Collar
33
 NSA5351V6-8
 2
 Pin
References
Non Destructive Test Manual (NTM)
 53-15-54 Part. 6
Structural Repair Manual (SRM)
 51-40-41
Fig. A-FBDAA
Cold Expansion of the Holes on FR44
(LH and RH Side)
Sheet 01
Sheet 02
Sheet 03
Fig. A-FBGAA
Table of the Expanded Holes
Sheet 01
NOTE
: For the holes H2 and H3 : if the existing hole is more than 8.732 mm
(0.3437 in.) max. diameter, contact AI.
(a) Remove the fasteners, refer to the table given in
 Fig. A-FBDAA Sheet 01
 , Fig. A-
FBDAA Sheet 02
, Fig. A-FBDAA Sheet 03
 .
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 30
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 39

@A300-600
SERVICE BULLETIN
(b) Do a check by rotating probe, refer to
 NTM 53-15-54 Part. 6.
NOTE
 (01)
: For the holes 1, 4, 5, 6, 7, 8 and 9:
- If no crack is found go to para. (c) of this Subtask.
- If crack, ream out the crack, step by step, up to a max.
diameter corresponding to 7.260 mm (0.2858 in.).
- If the crack is out of the limits, contact AI.
NOTE
 (02)
: For the holes 2 and 3:
- If no crack is found go to para. (c) of this Subtask.
- If crack, ream out the crack, step by step, up to a max.
diameter corresponding to 8.810 mm (0.3468 in.).
If the initial hole diameter is more than 8.732 mm (0.3437 in.),
contact AI.
- If the crack is out of the limits, contact AI.
If the frame foot is cutout :
NOTE
 (03)
: For the holes 1:
- If no crack is found go to para. (c) of this Subtask.
- If crack, contact AI.
If a bush is installed on the frame:
NOTE
 (04)
: For the holes 1:
- If no crack is found go to SUBTASK 536125-831-010 001
Repair the Hole H1 on FR41 thru FR46. .
- If crack, contact AI.
(c) Ream the holes to the initial hole diameter, then do the cold expansion operation
and ream to the final diameter, refer to the table given in
 Fig. A-FBGAA Sheet 01
 .
Do this in accordance with
 SRM 51-40-41 or use the cold expansion tool KIT FTI-
A300-53-6125-1.
(d) Clean the drilled area.
(e) Install in the cold expanded holes:
Refer to Fig. A-FBDAA Sheet 01
 , Fig. A-FBDAA Sheet 02
 , Fig. A-FBDAA Sheet 03
1
 For the holes H1:
1 pin NSA5359-4-8 Item 7
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 31
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 40

@A300-600
SERVICE BULLETIN
or
1 bolt ASNA2027V5-8 Item 2
with
1 collar NSA5330-8 Item 4
or
1 nut ASNA2529-5 Item 3
- If the frame foot is cutout:
1 pin NSA5359-4-6 Item 10
or
1 pin NSA5359-4-7 Item 6
or
1 pins NSA5359-4-8 Item 7
with
1 collar(s) NSA5330-8 Item 4
2
 For the holes H2 and H3:
2 pin NSA5359-4-8 Item 7
or
2 bolt ASNA2027V5-8 Item 2
or
2 pin NSA5359-5-8 Item 12
or
2 pin NSA5351V6-8 Item 33
with
2 collar NSA5330-8 Item 4
or
2 nut ASNA2529-5 Item 3
or
2 collar NSA5330-10 Item 5
or
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 32
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 41

@A300-600
SERVICE BULLETIN
2 collar NSA5330-12 Item 31
3
 For the holes H4, H5 and H6:
3 pin NSA5359-4-8 Item 7
or
3 bolt ASNA2027V5-8 Item 2
with
3 collar NSA5330-8 Item 4
or
3 nut ASNA2529-5 Item 3
4
 For the holes H7, H8 and H9:
3 pin NSA5359-4-7 Item 6
or
3 bolt ASNA2027V5-7 Item 1
with
3 collar NSA5330-8 Item 4
or
3 nut ASNA2529-5 Item 3
(f) Renew the protective finish.
(5) Subtask 536125-831-008-001 - Do the Cold Expansion of the Holes on FR45.
Work Zones and Access Panels
Zone
 Access/Work location
241
 Work location
 Frame 45
242
 Work location
 Frame 45
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 33
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 42

@A300-600
SERVICE BULLETIN
Manpower Resources
Manhours
 9.00
Minimum number of person
 1
Subtask elapsed time
 9.00
Skills
 AIRFRAME
NON DESTRUCTIVE
TESTING
Material necessary to do the job
Kit 536125A01R01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 ASNA2027V5-7
 8
 Bolt
3
 ASNA2529-5
 8
 Nut
4
 NSA5330-8
 9
 Collar
5
 NSA5330-10
 2
 Collar
6
 NSA5359-4-7
 9
 Pin
7
 NSA5359-4-8
 1
 Pin
8
 NSA5359-5-7
 2
 Pin
10
 NSA5359-4-6
 1
 Pin
30
 NSA5351V6-7
 2
 Pin
31
 NSA5330-12
 2
 Collar
References
Non Destructive Test Manual (NTM)
 53-15-54 Part. 6
Structural Repair Manual (SRM)
 51-40-41
Fig. A-FBEAA
Cold Expansion of the Holes on FR45
(LH and RH Side)
Sheet 01
Sheet 02
Sheet 03
Fig. A-FBGAA
Table of the Expanded Holes
Sheet 01
NOTE
: For the holes H2 and H3 : if the existing hole is more than 8.732 mm
(0.3437 in.) max. diameter, contact AI.
(a) Remove the fasteners, refer to the table given in
 Fig. A-FBEAA Sheet 01
 , Fig. A-
FBEAA Sheet 02
, Fig. A-FBEAA Sheet 03
 .
(b) Do a check by rotating probe, refer to
 NTM 53-15-54 Part. 6.
NOTE
 (01)
: For the holes 1, 4, 5, 6, 7 and 8:
- If no crack is found go to para. (c) of this Subtask.
- If crack, ream out the crack, step by step, up to a max.
diameter corresponding to 7.260 mm (0.2858 in.).
- If the crack is out of the limits, contact AI.
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 34
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 43

@A300-600
SERVICE BULLETIN
NOTE
 (02)
: For the holes 2 and 3:
- If no crack is found go to para. (c) of this Subtask.
- If crack, ream out the crack, step by step, up to a max.
diameter corresponding to 8.810 mm (0.3468 in.).
If the initial hole diameter is more than 8.732 mm (0.3437 in.),
contact AI.
- If the crack is out of the limits, contact AI.
If the frame foot is cutout:
NOTE
 (03)
: For the holes 1:
- If no crack is found go to para. (c) of this Subtask.
- If crack, contact AI.
If a bush is installed on the frame:
NOTE
 (04)
: For the holes 1:
- If no crack is found go to SUBTASK 536125-831-010 001
Repair the Hole H1 on FR41 thru FR46. .
- If crack, contact AI.
(c) Ream the holes to the initial hole diameter, then do the cold expansion operation
and ream to the final diameter, refer to the table given in
 Fig. A-FBGAA Sheet 01
 .
Do this in accordance with
 SRM 51-40-41 or use the cold expansion tool KIT FTI-
A300-53-6125-1.
(d) Clean the drilled area.
(e) Install in the cold expanded holes:
Refer to Fig. A-FBEAA Sheet 01
 , Fig. A-FBEAA Sheet 02
 , Fig. A-FBEAA Sheet 03
1
 For the holes H1:
1 pin NSA5359-4-7 Item 6
or
1 bolt ASNA2027V5-7 Item 1
with
1 collar NSA5330-8 Item 4
or
1 nut ASNA2529-5 Item 3
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 35
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 44

@A300-600
SERVICE BULLETIN
- If the frame foot is cutout:
1 pin NSA5359-4-6 Item 10
or
1 pins NSA5359-4-7 Item 6
or
1 pin NSA5359-4-8 Item 7
with
1 collar(s) NSA5330-8 Item 4
2
 For the holes H2 and H3:
2 pin NSA5359-4-7 Item 6
or
2 bolt ASNA2027V5-7 Item 1
or
2 pin NSA5359-5-7 Item 8
or
2 pin NSA5351V6-7 Item 30
with
2 collar NSA5330-8 Item 4
or
2 nut ASNA2529-5 Item 3
or
2 collar NSA5330-10 Item 5
or
2 collar NSA5330-12 Item 31
3
 For the holes H4, H5, H6, H7 and H8:
5 pin NSA5359-4-7 Item 6
or
5 bolt ASNA2027V5-7 Item 1
with
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 36
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 45

@A300-600
SERVICE BULLETIN
5 collar NSA5330-8 Item 4
or
5 nut ASNA2529-5 Item 3
(f) Renew the protective finish.
(6) Subtask 536125-831-009-001 - Do the Cold Expansion of the Holes on FR46.
Work Zones and Access Panels
Zone
 Access/Work location
241
 Work location
 Frame 46
242
 Work location
 Frame 46
Manpower Resources
Manhours
 9.00
Minimum number of person
 1
Subtask elapsed time
 9.00
Skills
 AIRFRAME
NON DESTRUCTIVE
TESTING
Material necessary to do the job
Kit 536125A01R01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 ASNA2027V5-7
 2
 Bolt
2
 ASNA2027V5-8
 6
 Bolt
3
 ASNA2529-5
 8
 Nut
4
 NSA5330-8
 9
 Collar
5
 NSA5330-10
 2
 Collar
6
 NSA5359-4-7
 3
 Pin
7
 NSA5359-4-8
 7
 Pin
10
 NSA5359-4-6
 1
 Pin
12
 NSA5359-5-8
 2
 Pin
31
 NSA5330-12
 2
 Collar
33
 NSA5351V6-8
 2
 Pin
References
Non Destructive Test Manual (NTM)
 53-15-54 Part. 6
Structural Repair Manual (SRM)
 51-40-41
Fig. A-FBFAA
Cold Expansion of the Holes on FR46
(LH and RH Side)
Sheet 01
Sheet 02
Sheet 03
Fig. A-FBGAA
Table of the Expanded Holes
Sheet 01
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 37
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 46

@A300-600
SERVICE BULLETIN
NOTE
: For the holes H2 and H3: if the existing hole is more than 8.732 mm
(0.3437 in.) max. diameter, contact AI.
(a) Remove the fasteners, refer to the table given in
 Fig. A-FBFAA Sheet 01
 , Fig. A-
FBFAA Sheet 02
, Fig. A-FBFAA Sheet 03
 .
(b) Do a check by rotating probe, refer to
 NTM 53-15-54 Part. 6).
NOTE
 (01)
: For the holes 1, 4, 5, 6, 7 and 8:
- If no crack is found go to para. (c) of this Subtask.
- If crack, ream out the crack, step by step, up to a max.
diameter corresponding to 7.260 mm (0.2858 in.).
- If the crack is out of the limits, contact AI.
NOTE
 (02)
: For the holes 2 and 3:
- If no crack is found go to para. (c) of this Subtask.
- If crack, ream out the crack, step by step, up to a max.
diameter corresponding to 8.810 mm (0.3468 in.).
If the initial hole diameter is more than 8.732 mm (0.3437 in.),
contact AI.
- If the crack is out of the limits, contact AI.
If the frame foot is cutout:
NOTE
 (03)
: For the holes 1:
- If no crack is found go to para. (c) of this Subtask.
- If crack, contact AI.
If a bush is installed on the frame:
NOTE
 (04)
: For the holes 1:
- If no crack is found go to SUBTASK 536125-831-010 001
Repair the Hole H1 on FR41 thru FR46. .
- If crack, contact AI.
(c) Ream the holes to the initial hole diameter, then do the cold expansion operation
and ream to the final diameter, refer to the table given in
 Fig. A-FBGAA Sheet 01
 .
Do this in accordance with
 SRM 51-40-41 or use the cold expansion tool KIT FTI-
A300-53-6125-1.
(d) Clean the drilled area.
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 38
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 47

@A300-600
SERVICE BULLETIN
(e) Install in the cold expanded holes:
Refer to Fig. A-FBFAA Sheet 01
 , Fig. A-FBFAA Sheet 02
 , Fig. A-FBFAA Sheet 03
1
 For the holes H1:
1 pin NSA5359-4-8 Item 7
or
1 bolt ASNA2027V5-8 Item 2
with
1 collar NSA5330-8 Item 4
or
1 nut ASNA2529-5 Item 3
- If the frame foot is cutout:
1 pin NSA5359-4-6 Item 10
or
1 pin NSA5359-4-7 Item 6
or
1 pins NSA5359-4-8 Item 7
with
1 collar(s) NSA5330-8 Item 4
2
 For the holes H2 and H3:
2 pin NSA5359-4-8 Item 7
or
2 bolt ASNA2027V5-8 Item 2
or
2 pin NSA5359-5-8 Item 12
or
2 pin NSA5351V6-8 Item 33
with
2 collar NSA5330-8 Item 4
or
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 39
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 48

@A300-600
SERVICE BULLETIN
2 nut ASNA2529-5 Item 3
or
2 collar NSA5330-10 Item 5
or
2 collar NSA5330-12 Item 31
3
 For the holes H4, H5 and H6:
3 pin NSA5359-4-8 Item 7
or
3 bolt ASNA2027V5-8 Item 2
with
3 collar NSA5330-8 Item 4
or
3 nut ASNA2529-5 Item 3
4
 For the holes H7 and H8:
2 pin NSA5359-4-7 Item 6
or
2 bolt ASNA2027V5-7 Item 1
with
2 collar NSA5330-8 Item 4
or
2 nut ASNA2529-5 Item 3
(f) Renew the protective finish.
(7) Subtask 536125-831-010-001 - Repair the Hole H1 on FR41 thru FR46.
Work Zones and Access Panels
Zone
 Access/Work location
241
 Work location
 from Frame 41 to Frame 46
242
 Work location
 from Frame 41 to Frame 46
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 40
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 49

@A300-600
SERVICE BULLETIN
Manpower Resources
Manhours
 18.00
Minimum number of person
 1
Subtask elapsed time
 18.00
Skills
 AIRFRAME
Material necessary to do the job
Kit 536125A01R01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
4
 NSA5330-8
 6
 Collar
10
 NSA5359-4-6
 6
 Pin
34
 ASNA2027V4-8
 6
 Bolt
35
 ASNA2027V4-10
 6
 Bolt
36
 NSA5359-4-5
 6
 Pin
Component COMPA01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
40
 ASNA2531-4
 6
 NUT
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE
: The components listed above are only necessary if a bush has been
installed during the Inspection Service Bulletin No.A300-53-6122. The
quantity of these items are to be ordered as required.
References
Structural Repair Manual (SRM)
 51-40-41
Fig. A-FCAAA
Repair of the Hole H1 on FR41 thru
FR46
Sheet 01
Sheet 02
Sheet 03
Fig. A-FCBAA
Principle of Bush Manufacturing
Sheet 01
(a) Remove the fasteners and the bush for the hole H1, refer to the table given in the
Fig. A-FCAAA Sheet 03
 .
(b) Cut out the frame foot in relation with the dimensions given in the Fig. A-FCAAA
Sheet 01
.
NOTE
: When you do the cut of the frame foot, be careful not to damage
the structure.
(c) Clean the cutout area.
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 41
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 50

@A300-600
SERVICE BULLETIN
(d) Ream the hole H1 to the initial hole diameter, then do the cold expansion operation
and ream to the final diameter, refer to the table given in
 Fig. A-FCAAA Sheet 03
 .
Do this in accordance with
 SRM 51-40-41 or use the cold expansion tool KIT FTI-
A300-53-6125-1.
(e) Install a shouldered bush on the frame in accordance with the dimensions given in
the Fig. A-FCBAA Sheet 01
 .
(f) Install the new fasteners with the bush :
Refer to Fig. A-FCAAA Sheet 02
 , Fig. A-FCAAA Sheet 03
6 bolt ASNA2027V4-8 Item 34
or
6 bolt ASNA2027V4-10 Item 35
with
6 Nut ASNA2531-4 Item 40
NOTE
: Install a shim of the same thickness as the cut out part of the frame
foot before installations of the floor fitting support.
(g) Renew the protective finish.
(h) Remove the fasteners for the holes H10, H11 and H12. Refer to the table given in
the Fig. A-FCAAA Sheet 03
 .
(i) Ream the hole H10, H11 and H12 to the initial hole diameter, then do the cold
expansion operation and ream to the final diameter, refer to the table given in
 Fig.
A-FCAAA Sheet 03
.
Do this in accordance with
 SRM 51-40-41 or use the cold expansion tool KIT FTI-
A300-53-6125-1.
(j) Clean the drilled area.
(k) Install in the cold expanded holes H10, H11 and H12:
NOTE
: Due to low possibility of frame repair, the quantity given in this
subtask is valid for two frames on one side (LH or RH side).
Refer to Fig. A-FCAAA Sheet 01
 , Fig. A-FCAAA Sheet 02
 , Fig. A-FCAAA Sheet 03
6 pin NSA5359-4-5 Item 36
or
6 pin NSA5359-4-6 Item 10
with
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 42
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 51

@A300-600
SERVICE BULLETIN
6 collar NSA5330-8 Item 4
(l) Renew the protective finish.
(8) Subtask 536125-831-011- 001 - ADDITIONAL KIT (introduced by revision 02 of this
Service Bulletin)
Manpower Resources
Manhours
 1.00
Minimum number of person
 1
Subtask elapsed time
 1.00
Skills
 NON SPECIFIC
Material necessary to do the job
Supplementary kit 536125A01S01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
4
 NSA5330-8
 6
 Collar
6
 NSA5359-4-7
 4
 Pin
7
 NSA5359-4-8
 4
 Pin
10
 NSA5359-4-6
 10
 Pin
30
 NSA5351V6-7
 4
 Pin
31
 NSA5330-12
 12
 Collar
32
 NSA5351V6-6
 4
 Pin
33
 NSA5351V6-8
 4
 Pin
34
 ASNA2027V4-8
 6
 Bolt
35
 ASNA2027V4-10
 6
 Bolt
36
 NSA5359-4-5
 6
 Pin
NOTE
: The additional kit is valid for operators which have ordered Kit
536125A01R00 and have not accomplished this Service Bulletin yet.
(a) The Supplementary kit 536125A01S01 includes :
6 collar NSA5330-8 Item 4
4 pin NSA5359-4-7 Item 6
4 pin NSA5359-4-8 Item 7
10 pin NSA5359-4-6 Item 10
4 pin NSA5351V6-7 Item 30
12 collar NSA5330-12 Item 31
4 pin NSA5351V6-6 Item 32
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 43
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 52

@A300-600
SERVICE BULLETIN
4 pin NSA5351V6-8 Item 33
6 bolt ASNA2027V4-8 Item 34
6 bolt ASNA2027V4-10 Item 35
6 pin NSA5359-4-5 Item 36
D. TEST
None
E. CLOSE-UP
(1) Subtask 536125-942-019-001 - Close-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 24-00-00, Page Block 301
25-21-00, Page Block 401
25-22-11, Page Block 401
25-23-31, Page Block 401
25-58-22, Page Block 401
52-10-00
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Between Frame 41
 and Frame 46, install the heat and sound insulation blankets,
refer to
 AMM 25-22-11 Page Block 401.
(c) For freighter, between Frame 41
 and Frame 46, install the compartment lining-
panels, refer to
 AMM 25-58-22 Page Block 401.
(d) Except for freighter, between Frame 41
 and Frame 46, install the passenger-
compartment lining-panels, refer to
 AMM 25-23-31 Page Block 401.
(e) Except for freighter, between Frame 41
 and Frame 46, install the passengers seats,
refer to
 AMM 25-21-00 Page Block 401.
(f) Remove the access platform(s).
(g) Put the aircraft back to its initial configuration.
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 44
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 53

@A300-600
SERVICE BULLETIN
**CONF ALL
FR41
FR46
A A
=
FR41
A
H1
H2
H3
H4
H5
H6
H7
H8
EXPANSION SLEEVE INSTALLATION.
ORIENTATION SCHEMATIC DIAGRAM
STGR25
STGR26
STGR27
D_SB_536125_5_BAAA_01_01
Figure A-FBAAA - Sheet 01
Cold Expansion of the Holes on FR41 (LH and RH Side)
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 45
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 54

@A300-600
SERVICE BULLETIN
**CONF ALL
HOLE
NO.
NEW
FASTENER NUTITEMOLDFASTENER ITEM ITEM
TABLE FOR THE INSTALLATION OF THE FASTENERS
NOTE: IF FINDING, INSTALL THE BOLT RELATED TO
THE FINAL COLD EXPANDED DIAMETER.
H1
H1
IF A BUSH IS INSTALLED ON THE FRAME
REFER TO FIGURE A−FCAAA
IF THE FRAME FOOT IS CUTOUT
4or
ASNA2004V4−7 (13)
NSA5359−4−7 6 NSA5330−8
3
3
ASNA2529−5
ASNA2529−5
1
1
ASNA2027V5−7
ASNA2027V5−7
(22)
(16)NSA5357−4−7
(18)
H1
ASNA2027V4−6
(22)
NSA5330−8
NSA5330−8
NSA5330−8
4
4
4
ASNA2027V4−7
ASNA2027V4−8
(21)
(23)
NSA5359−4−6
NSA5359−4−7
NSA5359−4−8
10
6
7
HOLE
NO.
NEW
FASTENER NUTITEMOLDFASTENER ITEM ITEM
4or
ASNA2004V4−7 (13)
NSA5359−4−7 6 NSA5330−8
3
3
ASNA2529−5
ASNA2529−5
1
1
ASNA2027V5−7
ASNA2027V5−7
(22)
(16)NSA5357−4−7
(18)H2
H3
NSA5359−4−7
NSA5330−10 58NSA5351V5−7 (15) NSA5359−5−7
(40) 30 NSA5330−12 31
NSA5359−5−7 (41) NSA5351V6−7 30 NSA5330−12 31
ASNA2027V4−7
NSA5359−4−7
ASNA2027V4−7
NSA5357−5−7 NSA5351V6−7
D_SB_536125_5_BAAA_02_01
Figure A-FBAAA - Sheet 02
Cold Expansion of the Holes on FR41 (LH and RH Side)
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 46
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 55

@A300-600
SERVICE BULLETIN
**CONF ALL
NOTE: IF FINDING, INSTALL THE BOLT RELATED TO
THE FINAL COLD EXPANDED DIAMETER.
HOLE
NO.
NEW
FASTENER NUTITEMOLDFASTENER ITEM ITEM
TABLE FOR THE INSTALLATION OF THE FASTENERS
4
ASNA2529−5 3
ASNA2529−5 3
4
ASNA2529−5 3
ASNA2529−5 3
NSA5330−8
H4
H5
H7
H8
H6
ASNA2004V4−7
or
ASNA2027V4−7
ASNA2004V4−6
or
ASNA2027V4−6
NSA5357−4−6
NSA5359−4−6
NSA5357−4−7
NSA5359−4−7
(25)
(20)
(21)
(13)
(22)
(16)
(18)
(26)
NSA5359−4−7
ASNA2027V5−7
ASNA2027V5−7
NSA5359−4−6
ASNA2027V5−6
ASNA2027V5−6
6
1
1
10
9
9
NSA5330−8
D_SB_536125_5_BAAA_03_00
Figure A-FBAAA - Sheet 03
Cold Expansion of the Holes on FR41 (LH and RH Side)
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 47
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 56

@A300-600
SERVICE BULLETIN
**CONF ALL
FR41
FR46
A A
=
A
EXPANSION SLEEVE INSTALLATION.
ORIENTATION SCHEMATIC DIAGRAM
STGR25
STGR26
FR42
STGR27
H7
H8
H2
H1
H3
H4
H5
H6
D_SB_536125_5_BBAA_01_01
Figure A-FBBAA - Sheet 01
Cold Expansion of the Holes on FR42 (LH and RH Side)
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 48
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 57

@A300-600
SERVICE BULLETIN
**CONF ALL
HOLE
NO.
NEW
FASTENER NUTITEMOLDFASTENER ITEM ITEM
TABLE FOR THE INSTALLATION OF THE FASTENERS
NOTE: IF FINDING, INSTALL THE BOLT RELATED TO
THE FINAL COLD EXPANDED DIAMETER.
H1
H1
IF A BUSH IS INSTALLED ON THE FRAME
REFER TO FIGURE A−FCAAA
IF THE FRAME FOOT IS CUTOUT
4or NSA5330−8
3
3
ASNA2529−5
ASNA2529−5
H1
ASNA2027V4−6
(22)
NSA5330−8
NSA5330−8
NSA5330−8
4
4
4
ASNA2027V4−7
ASNA2027V4−8
(21)
(23)
NSA5359−4−6
NSA5359−4−7
NSA5359−4−8
10
6
7
HOLE
NO.
NEW
FASTENER NUTITEMOLDFASTENER ITEM ITEM
4or NSA5330−8
3
3
ASNA2529−5
ASNA2529−5H2
H3
NSA5330−10 5
NSA5330−12 31
NSA5330−12 31
ASNA2004V4−6
ASNA2027V4−6
NSA5357−4−6
NSA5359−4−6
(20)
(21)
(25)
(26)
NSA5359−4−6
ASNA2027V5−6
ASNA2027V5−6
10
9
9
ASNA2004V4−6
ASNA2027V4−6
(20)
(21)
NSA5359−4−6 10
NSA5357−4−6 (25) ASNA2027V5−6 9
NSA5359−4−6 (26) ASNA2027V5−6 9
NSA5351V5−6 (24) NSA5359−5−6 11
NSA5357−5−6 32
NSA5359−5−6 (43) NSA5351V6−6 32
(42) NSA5351V6−6
D_SB_536125_5_BBAA_02_01
Figure A-FBBAA - Sheet 02
Cold Expansion of the Holes on FR42 (LH and RH Side)
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 49
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 58

@A300-600
SERVICE BULLETIN
**CONF ALL
NOTE: IF FINDING, INSTALL THE BOLT RELATED TO
THE FINAL COLD EXPANDED DIAMETER.
HOLE
NO.
NEW
FASTENER NUTITEMOLDFASTENER ITEM ITEM
TABLE FOR THE INSTALLATION OF THE FASTENERS
NSA5330−8 4
ASNA2529−5 3
ASNA2529−5 3
4
ASNA2529−5 3
ASNA2529−5 3
(16)
(18)
NSA5359−4−7
ASNA2027V5−7
ASNA2027V5−7
6
1
1
ASNA2004V4−6
or
ASNA2027V4−6
NSA5357−4−6
NSA5359−4−6
ASNA2004V4−7
or
ASNA2027V4−7
NSA5357−4−7
NSA5359−4−7
(20)
(21)
(25)
(26)
(13)
(22)
NSA5359−4−6
ASNA2027V5−6
ASNA2027V5−6
10
9
9
NSA5330−8
H4
H5
H6
H7
H8
D_SB_536125_5_BBAA_03_00
Figure A-FBBAA - Sheet 03
Cold Expansion of the Holes on FR42 (LH and RH Side)
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 50
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 59

@A300-600
SERVICE BULLETIN
**CONF ALL
FR41
FR46
A A
=
A
H1
H2
H3
H4
H5
H6
H7
EXPANSION SLEEVE INSTALLATION.
ORIENTATION SCHEMATIC DIAGRAM
STGR26
STGR27 H8
H9
FR43
D_SB_536125_5_BCAA_01_01
Figure A-FBCAA - Sheet 01
Cold Expansion of the Holes on FR43 (LH and RH Side)
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 51
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 60

@A300-600
SERVICE BULLETIN
**CONF ALL
HOLE
NO.
NEW
FASTENER NUTITEMOLDFASTENER ITEM ITEM
TABLE FOR THE INSTALLATION OF THE FASTENERS
NOTE: IF FINDING, INSTALL THE BOLT RELATED TO
THE FINAL COLD EXPANDED DIAMETER.
H1
H1
IF A BUSH IS INSTALLED ON THE FRAME
REFER TO FIGURE A−FCAAA
IF THE FRAME FOOT IS CUTOUT
4NSA5330−8
3
3
ASNA2529−5
ASNA2529−5
H1
ASNA2027V4−6
(22)
NSA5330−8
NSA5330−8
NSA5330−8
4
4
4
ASNA2027V4−7
ASNA2027V4−8
(21)
(23)
NSA5359−4−6
NSA5359−4−7
NSA5359−4−8
10
6
7
HOLE
NO.
NEW
FASTENER NUTITEMOLDFASTENER ITEM ITEM
4or NSA5330−8
3
3
ASNA2529−5
ASNA2529−5H2
H3
NSA5330−10 5
NSA5330−12 31
NSA5330−12 31
ASNA2004V4−6
or
ASNA2027V4−6
NSA5357−4−6
NSA5359−4−6
(21)
(25)
(20)
(26)
NSA5359−4−6
ASNA2027V5−6
ASNA2027V5−6
10
9
9
ASNA2004V4−6
ASNA2027V4−6
NSA5357−4−6
NSA5359−4−6
NSA5351V5−6
NSA5357−5−6
NSA5359−5−6
(20)
(21)
(25)
(26)
(24)
(42)
(43)
NSA5359−4−6
ASNA2027V5−6
ASNA2027V5−6
NSA5359−5−6
NSA5351V6−6
10
9
9
11
32
32
NSA5351V6−6
D_SB_536125_5_BCAA_02_01
Figure A-FBCAA - Sheet 02
Cold Expansion of the Holes on FR43 (LH and RH Side)
DATE: Nov 08/00 SERVICE BULLETIN No.: A300-53-6125
REVISION No.: 04 - Mar 17/15 Page: 52
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

The text continues at https://openairdocs.org/service-documents/airbus/a300-53-6125/file/9dbd8a4268fb.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
