# Airbus Service Bulletin A300-53-6185

Copy: No revision named ("SB A300-53-6185"), 30 pages: PDF https://openairdocs.org/files/sha256/3e/b0/3eb0907429165438c216ae5b491f93919a2e1818e0c12d586b0732fee6e30c79; text https://openairdocs.org/service-documents/airbus/a300-53-6185/file/3eb090742916.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2017-0480; AD 2017-21-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A300-53-6185
- Page: https://openairdocs.org/service-documents/airbus/a300-53-6185

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2017-21-02](https://openairdocs.org/ad/2017-21-02.md), effective Nov 27, 2017: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a300-53-6185/proposed.md).

## Text (30 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2017-0480; AD 2017-21-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A300-600
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 53
TITLE: FUSELAGE - REAR FUSELAGE - INSPECTION OF AFT CARGO DOOR
LOWER TORSION BOX AREA FOR AIRCRAFT PRE MOD No.
05438D4492
**CONF ALL
MODIFICATIONS
None
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
Several cracks have been found on the AFT cargo door of an A300-600 aircraft during maintenance.
The cracks have been found on:
- The door sill beam flags
- The lock fittings
- The torsion box plates.
A fatigue analysis has shown that aircraft in post modification No. 05438D4492 configuration from Entry
Into Service (EIS) aircraft require Special Detailed Inspection and have been covered by the Inspection
Service Bulletin No. 53-6179. Further investigations shows that due to the interchangeability of lock
fittings with the post modification No. 10319D20472 design may have been installed on aircraft in
pre modification No. 05438D4492 in the frame of standard part replacement. This Service Bulletin
has been launched to track and inspect aircraft in pre modification No. 10319D20472 configuration
having installed lock fitting of post modification No. 10319D20472 design in the frame of standard part
replacement.
This Service Bulletin details the procedures to check the modification status of the installed lock fittings
and to do High Frequency Eddy Current (HFEC) Inspection of the following parts for potential cracks if
necessary:
- The door sill beam flags
- The lock fittings
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A300-600
SERVICE BULLETIN
SUMMARY
- The torsion box plates.
The accomplishment of this Service Bulletin will contribute to detect potential cracks in the door sill
beam area of the AFT cargo door.
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 ETOPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 NO
NOTE
 (1)
: Service Bulletin must be accomplished.
MATERIAL PRICE INFORMATION
No Material
EFFECTIVITY
This Service Bulletin is applicable to this (these) operator(s) :
FDX IRM KAC
CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU
 None
OEB
 None
AOT
 None
SIL
 None
ISI
 None
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 None
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 NO
HARD
 NO
SOFT
 NO
OBRM
 NO
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 2
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A300-600
SERVICE BULLETIN
SUMMARY
MANPOWER
Task 536185-832-848-001: Inspection
TOTAL MANHOURS
 11.75
ELAPSED TIME (HOURS)
 11.75
APPENDICES
None
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 3
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A300-600
SERVICE BULLETIN
SUMMARY
**CONF ALL
STGR27RH
STGR44RH
FR59A
FR60
FR61
FR62
FR63
STGR46RH
A
FR64
FR65
FR59
FR58
INSPECTION OF AFT CARGO DOOR LOWER
TORSION BOX AND LOCK FITTING AREA
A
Z150
D_SB_536185_6_SAAA_01_00
Figure A-G SAAA - S heet 01
Inspection of aft cargo door
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 4
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A300-600
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 53
TITLE: FUSELAGE - REAR FUSELAGE - INSPECTION OF AFT CARGO DOOR
LOWER TORSION BOX AREA FOR AIRCRAFT PRE MOD No.
05438D4492
MODIFICATION No.: None
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
(1) Models
B4-603 B4-622 C4-620
(2) Effectivity by MSN
0344 0358 0361 0365 0380
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
FDX
 0358 0361 0365
IRM
 0380
KAC
 0344
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A300-600
SERVICE BULLETIN
(4) Configuration by MSN
MSN
 CONFIGURATION
0344 0358 0361 0365 0380
 001
(5) Configuration definition
**CONF 001
Config. 001 is valid for all the aircraft given in the effectivity of this Service Bulletin as a
standard configuration.
(6) Material Effectivity
MATERIAL
 QTY PER A/C
 SEE NOTES
Consumable CMLD01
 As required
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
Several cracks have been found on the AFT cargo door of an A300-600 aircraft during
maintenance. The cracks have been found on:
- The door sill beam flags
- The lock fittings
- The torsion box plates.
A fatigue analysis has shown that aircraft in post modification No. 05438D4492
configuration from Entry Into Service (EIS) aircraft require Special Detailed Inspection
and have been covered by the Inspection Service Bulletin No. 53-6179. Further
investigations shows that due to the interchangeability of lock fittings with the
post modification No. 10319D20472 design may have been installed on aircraft in
pre modification No. 05438D4492 in the frame of standard part replacement. This
Service Bulletin has been launched to track and inspect aircraft in pre modification
No. 10319D20472 configuration having installed lock fitting of post modification No.
10319D20472 design in the frame of standard part replacement.
(2) Objective/Action
This Service Bulletin details the procedures to check the modification status of the
installed lock fittings and to do High Frequency Eddy Current (HFEC) Inspection of the
following parts for potential cracks if necessary:
- The door sill beam flags
- The lock fittings
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 2
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A300-600
SERVICE BULLETIN
- The torsion box plates.
(3) Advantages
The accomplishment of this Service Bulletin will contribute to detect potential cracks in
the door sill beam area of the AFT cargo door.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
Task 536185-832-848-001: Inspection
(1) Examine the Record for Lock Fitting Replacement
(2) Do an Inspection of the Aft Cargo Door Lower Torsion Box Area and Sill Beam Area
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory by the issue of an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA). The AD must
be used as the reference document for the mandated accomplishment timescale.
Table 1, Config. 001 - Inspection of Aft Cargo Door Lower Torsion Box Area and Sill Beam Area
CONDITION
 ACTION
 COMPLIANCE TIME
 REPETITIVE INTERVAL NOT
TO EXCEED
All Aircraft
 Examine the record
for lock fitting
replacement
None
 None
If the record
found for the lock
fitting
replacement and
the record is
complete
In accordance with
SUBTASK
536185-832-201 002
Do an Inspection of
the Aft Cargo Door
Lower Torsion Box
Area and Sill Beam
Area
25800 (Flight Cycle) FC
from lock fitting
installation
15100 FC
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 3
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A300-600
SERVICE BULLETIN
If no record found
for the lock fitting
replacement or
the record is
incomplete
In accordance with
SUBTASK
536185-832-201 002
Do an Inspection of
the Aft Cargo Door
Lower Torsion Box
Area and Sill Beam
Area
25800 FC from Nov
01/96
15100 FC
Crack found
 Contact AIRBUS
before next flight and
follow there
instructions.
None
 None
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approv al No. EASA. 21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
Task 536185-832-848-001: Inspection
Get Access
 3.50
On Aircraft
Examine the Record for Lock Fitting Replacement
 0.25
Do an Inspection of the Aft Cargo Door Lower Torsion
Box Area and Sill Beam Area
4.50
Close-Up
 3.50
TOTAL MANHOURS
 11.75
ELAPSED TIME (HOURS)
 11.75
H. WEIGHT AND BALANCE
Not Changed
I. ELECTRICAL LOAD DATA
Not Changed
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 4
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A300-600
SERVICE BULLETIN
J. REFERENCES
Aircraft Maintenance Manual (AMM)
 06-21-00 06-31-53 24-00-00
25-52-22 25-52-26 25-52-41
52-30-00
Consumable Material List (CML)
Elec. Std. Practices Manual (ESPM)
 20-55-00
Non Destructive Test Manual (NTM)
 53-17-33
K. PUBLICATION AFFECTED
None
L. INTERCHANGEABILITY/MIXABILITY
Not Applicable
M. SPARES
None
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 5
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A300-600
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 6
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A300-600
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
None
(2) Price and Availability
None
B. INDUSTRY SUPPORT INFORMATION
AIRBUS will not provide industry support for accomplishment of this Service Bulletin.
C. LIST OF COMPONENTS
No Kit
D. LIST OF MATERIALS - OPERATOR SUPPLIED
(1) Consumable Materials
Consumable CMLD01
ITEM
 DESCRIPTION
 REFERENCE TO CML
MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner-General - -
 08BAA9
 As required
Textile-Lint Free Cotton -
 14SBA1
 As required
(2) Components
None
(3) Equipment
None
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
F. TOOLING
None
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 7
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A300-600
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 8
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A300-600
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 536185-832-848-001 - Inspection
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC. AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: The purpose of flow charts is to supplement the information given in the Procedure
and Compliance paragraphs and not to serve as the primary source for tasks or
compliance times given in this Service Bulletin.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. Other paragraphs are recommended and may be deviated
from, done as part of other actions or done with accepted methods different from
those given in the Service Bulletin, as long as the RC paragraphs can be done and
the aircraft can be put back into a serviceable condition.
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 9
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A300-600
SERVICE BULLETIN
Task Associated Data
Manpower
TOTAL MANHOURS
 11.75
ELAPSED TIME (HOURS)
 11.75
A. GENERAL
(1) Subtask 536185-910-201-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-21-00, Page Block 001
06-31-53, Page Block 001
Consumable Material List (CML)
(a) For the identification of zones, refer to AMM 06-21-00, Page Block 001.
(b) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(c) For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Material List (CML).
(2) Subtask 536185-839-201-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
B. PREPARATION
(1) Subtask 536185-941-201-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 24-00-00, Page Block 301
25-52-22, Page Block 401
25-52-26, Page Block 401
25-52-41, Page Block 401
52-30-00, Page Block 001
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 10
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A300-600
SERVICE BULLETIN
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
- Aircraft electrical network de-energized
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position.
(a) Make sure that the aircraft is electrically grounded, refer to AMM 24-00-00, Page
Block 301.
(b) Put an access platform in position at the AFT cargo compartment door.
(c) Open the AFT cargo compartment door, refer to AMM 52-30-00, Page Block 001.
(d) Between Frame 60 and Frame 63, remove the ball mats as necessary, refer to
AMM 25-52-22, Page Block 401.
(e) Between Frame 60 and Frame 63, remove the door sill latches as necessary, refer
to AMM 25-52-41, Page Block 401.
(f) Between Frame 60 and Frame 63 remove the Power Drive Unit (PDU) as
necessary, refer to AMM 25-52-26, Page Block 401.
C. PROCEDURE
(1) Subtask 536185-832-202-001 - Examine the Record for Lock Fitting Replacement
Manpower Resources
Manhours
 0.25
Minimum number of person
 1
Subtask elapsed time
 0.25
Skills
 NON SPECIFIC
(a) Examine the record of lock fitting replacement for each of the 7 lock fittings:
1
 If record found for the lock fitting replacement and the record is complete:
a
 Examine the record for the lock fitting replacement date from the Service
Bulletin issuance:
<1> If the lock fitting is never replaced after Service Bulletin issuance:
<a> No further action required.
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 11
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A300-600
SERVICE BULLETIN
<2> If the lock fitting is replaced after Service Bulletin issuance:
<a> In accordance with SUBTASK 536185-832-201 002 Do an
Inspection of the Aft Cargo Door Lower Torsion Box Area and
Sill Beam Area .
<3> If the lock fitting was replaced before Service Bulletin issuance:
<a> In accordance with SUBTASK 536185-832-201 002 Do an
Inspection of the Aft Cargo Door Lower Torsion Box Area and
Sill Beam Area .
2
 If no record found for the lock fitting replacement or the record is incomplete:
a
 In accordance with SUBTASK 536185-832-201 002 Do an Inspection of
the Aft Cargo Door Lower Torsion Box Area and Sill Beam Area .
(2) Subtask 536185-832-201-002 - Do an Inspection of the Aft Cargo Door Lower
Torsion Box Area and Sill Beam Area
Manpower Resources
Manhours
 4.50
Minimum number of person
 1
Subtask elapsed time
 4.50
Skills
 NON DESTRUCTIVE
TESTING
Material necessary to do the job
Consumable CMLD01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner-
General - -
08BAA9
 As required
Textile-Lint Free Cotton -
 14SBA1
 As required
References
Non Destructive Test Manual (NTM)
 53-17-33
Fig. A-GBBAA
Inspection of aft cargo door lower torsion
box
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Sheet 05
Sheet 06
Sheet 07
Sheet 08
Fig. A-GRAAA
Report Sheet
Sheet 01
Fig. A-GFAAA
Flow Chart
Sheet 01
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 12
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A300-600
SERVICE BULLETIN
(a) Clean the inspection area with:
Non Aqueous
Cleaner-General - -
08BAA9 As required
and
Textile-Lint Free
Cotton -
14SBA1 As required
(b) Inspect the door sill beam area, refer to Fig. A-GFAAA
 .
1
 Inspect the radius and the splicing zone of the door sill beam flags.
a
 On the door sill beam flags between Frame 60 and Frame 63, do the
HFEC inspection in accordance with the accomplishment timescale given
in Para 1.E.(2):
Refer to NTM 53-17-33.
- On Frame 60 and Frame 60A do the HFEC inspection as shown on
Fig. A-GBBAA Sheet 03
 and View H of Fig. A-GBBAA Sheet 08
 .
- On Frame 61, Frame 61A and Frame 62, do the HFEC inspection as
shown on Fig. A-GBBAA Sheet 04
 and View H of Fig. A-GBBAA
Sheet 08
 .
- On Frame 62A and Frame 63, do the HFEC inspection as shown on
Fig. A-GBBAA Sheet 05
 and View H of Fig. A-GBBAA Sheet 08
 .
<1> If no crack found, repeat the inspections in accordance with the
accomplishment timescale, given in Para 1.E.(2).
<2> If crack found, contact AIRBUS before next flight and follow there
instructions.
2
 Inspect the radius and the splicing zone of the lock fittings and torsion box
plates at STGR45RH.
a
 On the lock fittings and the torsion box plates between Frame 60
and Frame 63, do the HFEC inspection in accordance with the
accomplishment timescale given in Para 1.E.(2):
Refer to NTM 53-17-33.
- On Frame 60, Frame 61, Frame 62 and Frame 63, do the HFEC
inspection as shown on View F of Fig. A-GBBAA Sheet 06
 .
- On Frame 60A, Frame 61A and Frame 62A, do the HFEC inspection
as shown on View G of Fig. A-GBBAA Sheet 07
 .
<1> If no crack found, repeat the inspections in accordance with the
accomplishment timescale, given in Para 1.E.(2).
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 13
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A300-600
SERVICE BULLETIN
<2> If crack found, contact AIRBUS before next flight and follow there
instructions.
3
 Send the inspection report to AIRBUS, refer to report sheet Fig. A-GRAAA
Sheet 01
 .
D. TEST
None
E. CLOSE-UP
(1) Subtask 536185-942-201-001 - Close-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 25-52-22, Page Block 401
25-52-26, Page Block 401
25-52-41, Page Block 401
52-30-00, Page Block 001
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Install the PDU, refer to AMM 25-52-26, Page Block 401.
(c) Install the door sill latches, refer to AMM 25-52-41, Page Block 401.
(d) Install the ball mats, refer to AMM 25-52-22, Page Block 401.
(e) Close the AFT cargo compartment door, refer to AMM 52-30-00, Page Block 001.
(f) Remove the access platform(s).
(g) Put the aircraft back to its initial configuration.
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 14
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A300-600
SERVICE BULLETIN
**CONF ALL
STGR27RH
STGR44RH
FR59A
FR60
FR61
FR62
FR63
STGR46RH
Z150
FR64
FR65
FR59
FR58
STGR25RH
A
A
B
D_SB_536185_6_BBAA_01_00
Figure A-G BBAA - S heet 01
Inspection of aft cargo door lower torsion box
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 15
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A300-600
SERVICE BULLETIN
**CONF ALL
STGR43RH
STGR46RH
E
FR59A
FR60
FR60A
FR61
FR61A
FR62
FR62A
FR63
FR63A
C
D
B
D_SB_536185_6_BBAA_02_00
Figure A-G BBAA - S heet 02
Inspection of aft cargo door lower torsion box
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 16
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A300-600
SERVICE BULLETIN
**CONF ALL
F
STGR46RH
STGR49RH
FR61
FR60
TORSION BOX
PLATE
LOCK
FITTING
DOOR SILL
DOOR SILL
FR60A
C
G
H
H
BEAM FLAG
BEAM FLAG
D_SB_536185_6_BBAA_03_00
Figure A-G BBAA - S heet 03
Inspection of aft cargo door lower torsion box
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 17
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A300-600
SERVICE BULLETIN
**CONF ALL
F
STGR49RH
STGR46RH
FR62
FR61A
TORSION BOX
PLATE
DOOR SILL
BEAM FLAG
FR61
LOCK
FITTING
LOCK
FITTING
DOOR SILL
BEAM FLAG
DOOR SILL
BEAM FLAG
D
F
G
H
H
H
D_SB_536185_6_BBAA_04_00
Figure A-G BBAA - S heet 04
Inspection of aft cargo door lower torsion box
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 18
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A300-600
SERVICE BULLETIN
**CONF ALL
STGR49RH
STGR46RH
FR63
FR62A
TORSION BOX
PLATE
DOOR SILL
BEAM FLAG
DOOR SILL
BEAM FLAG
LOCK
FITTING
G
F
H
H
E
D_SB_536185_6_BBAA_05_00
Figure A-G BBAA - S heet 05
Inspection of aft cargo door lower torsion box
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 19
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A300-600
SERVICE BULLETIN
**CONF ALL
INSPECTION AREA
NOTE:
VIEW LOOKING AFT
INBD
STGR44RH
LOCK
FITTING
DOOR SILL
BEAM FLAG TORSION BOX
PLATE
FR63
F
FR62
FR61
FR60
D_SB_536185_6_BBAA_06_01
Figure A-G BBAA - S heet 06
Inspection of aft cargo door lower torsion box
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 20
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A300-600
SERVICE BULLETIN
**CONF ALL
INSPECTION AREA
NOTE:
TORSION BOX
PLATE
DOOR SILL
BEAM FLAG
LOCK
FITTING
STGR44RH
VIEW LOOKING AFT
INBD
FR62A
FR61A
FR60A
G
D_SB_536185_6_BBAA_07_00
Figure A-G BBAA - S heet 07
Inspection of aft cargo door lower torsion box
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 21
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A300-600
SERVICE BULLETIN
**CONF ALL
INSPECTION AREA
NOTE:
FR63
TORSION BOX
PLATE
LOCK
FITTING
STGR44RH
DOOR SILL
BEAM FLAG
VIEW LOOKING FWD
INBD H
FR62A
FR62
FR61A
FR61
FR60A
FR60
D_SB_536185_6_BBAA_08_00
Figure A-G BBAA - S heet 08
Inspection of aft cargo door lower torsion box
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 22
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A300-600
SERVICE BULLETIN
**CONF ALL
NOTE:
THE PURPOSE OF FLOW CHARTS IS TO SUPPLEMENT THE
INFORMATION GIVEN IN THE PROCEDURE AND COMPLIANCE
PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE
FOR TASKS OR COMPLIANCE TIMES GIVEN IN THIS SERVICE BULLETIN.
7 FRAME AREAS TO BE INSPECTED. FLOW CHART APPLICABLE TO EACH AREA INDEPENDENTLY.01
IN ACCORDANCE WITH SUBTASK
536185−832−201−001 AT THRESHOLD
GIVEN IN PLANNING INFORMATION
PARAGRAPH E.(2) FROM REPLACEMENT
OF THE LOCK FITTING
DO AN INSPECTION OF THE
AFT CARGO DOOR LOWER
TORSION BOX AREA AND SILL BEAM AREA
SUBTASK 536185−832−201−001 AT
THRESHOLD GIVEN IN PLANNING
INFORMATION PARAGRAPH E.(2)
DO AN INSPECTION OF THE AFT CARGO
DOOR LOWER TORSION BOX AREA AND
SILL BEAM AREA IN ACCORDANCE WITH
NO YESANY CRACKFOUND?
REPEAT INSPECTION AT
THRESHOLD GIVEN IN
PLANNING INFORMATION
PARAGRAPH E.(2)
CONTACT AIRBUS FOR
REPAIR INSTRUCTIONS
NO FURTHER ACTIONNO
YES
NO
YES NO
YES
IS ANY
RECORD AVAILABLE
AND COMPLETED?
ANY
LOCK FITTING
REPLACED?
IS LOCK
FITTING REPLACED
AFTER ISSUANCE OF THIS
SERVICE BULLETIN?
FOR THE AIRCRAFT IN PREMOD No 05438D4492 CONFIGURATION SINCE
ENTRY INTO SERVICE (EIS) DO A HFEC INSPECTION OF LOCK FITTING,
TORSION BOX PLATE AND SILL BEAM FLAG AT CARGO DOOR LOWER TORSION
BOX AREA AT FR 60, FR 60A, FR 61, FR 61A, FR 62, FR 62A AND FR 63 01
D_SB_536185_6_FAAA_01_04
Figure A-GFAAA - Sheet 01
Flow Chart
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 23
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A300-600
SERVICE BULLETIN
**CONF ALL
INSPECTION REPORT
SERVICE BULLETIN No. :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
DATE OF INSPECTION :
INSPECTION METHOD : DETAILED INSPECTION
INSPECTION
YES NO
CRACK
YES NO
FR60A FR61 FR61A FR62 FR62A FR63
SILL BEAM FLAG
LOCK FITTING
TORSION PLATE
INSPECTION
YES NO
CRACK
YES NO
INSPECTION
YES NO
CRACK
YES NO
INSPECTION
YES NO
CRACK
YES NO
INSPECTION
YES NO
CRACK
YES NO
INSPECTION
YES NO
CRACK
YES NO
INSPECTION
YES NO
CRACK
YES NO
FR60
A300−53−6185 RETURN TO :
AIRBUS
CUSTOMER SERVICES ENGINEERING
DOORS − FUSELAGE − CWB − WINDOWS
1 ROND POINT MAURICE BELLONTE
31707 BLAGNAC CEDEX
FRANCE
FAX +33 (0)5 61 93 36 14
E−mail: inspection.results@airbus.com
D_SB_536185_6_RAAA_01_03
Figure A-GRAAA - Sheet 01
Report Sheet
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 24
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29

@A300-600
SERVICE BULLETIN
REPORTING SHEET
TITLE: FUSELAGE - REAR FUSELAGE - INSPECTION OF AFT CARGO DOOR
LOWER TORSION BOX AREA FOR AIRCRAFT PRE MOD No.
05438D4492
MODIFICATION No.: None
Please complete the appropriate item (A or B):
A - SB WILL BE
 embodied YES/NO (if NO please comment)
If YES, aircraft concer ned (as per SB effectivity by default) and planned dates (month/year) of
embodiment:
B - SB HAS BEEN
 embodied on aircraft:
Operator comments:
From Airline:
Name/Title:
Signature: Date:
If operational documentation is affected (see Paragraph 1.K of this SB): If information is needed prior to
next normal revision or prior to SB embodiment, please indicate required service(s):
Either: Modification Operational Impact (MOI), if available YES/NO
Or : Intermediate revision YES/NO
Important Information:
 This SB will only be incorporated in your maintenance and operational
documentation if this sheet is returned to Airbus and signed by a duly authorised representative. With
the next feasible revision, this will result in
- Updating of maintenance documentation to show pre and post SB data.
- Updating of maintenance and operational documentation to show post SB data after embodiment.
If this SB requires previous or simultaneous accomplishment of other SBs, Airbus shall automatically
include them in the manual revisions. Refer to SIL 00-037 for detailed information.
Please return this completed sheet to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn: SDC32 Technical Data and Documentation Services
F A X :( + 3 3 )56 19 32 80 6
e-mail: sb.reporting@airbus.com
or via your Resident Customer Support Office.
Alternatively, SB lists via letters or fax are also accepted.
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 30

@A300-600
SERVICE BULLETIN
QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin. The reported data
that you provide us will be used to analyse areas of difficulties and to take corrective action to further
improve the quality of our Service Bulletins.
We thank you for the time you have taken in completing this form.
(Please rate on a scale of 1 to 4, with 4 being the highest score)
- Quality rating of this SB 4321
- Quality rating of the Accomplishment Instructions 4321
- Quality rating of the Illustrations 4321
- Is this SB easy to understand ? Y/N
If you have had difficulties in the accomplishment of this SB please quote below the area(s) and give a
short description of the issue.
Planning Material Instructions
X Effectivity X Kit content X Preparation
X Reason X List of Materials Operator Supplied X Mod/Inspection
X Manpower X Industry support X Test
X References X Re-identification X Close-Up
X Publication X Tooling X Illustrations
Comments:
Operator: Date:
Name/Title:
Please return this form to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn : SEM4 Service Bulletins Management
F A X:( 3 3 )56 19 34 25 1
Or via your Resident Customer Support Office.
DATE: Feb 11/16 SERVICE BULLETIN No.: A300-53-6185
REVISION No.: 00 - Feb 11/16 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
