# Airbus Service Bulletin A300-57-6011

Copy: Revision 2 ("FAA-2015-6550_SB A300-57-6011_Rev2"), 13 pages: PDF https://openairdocs.org/files/sha256/cd/3b/cd3b1fd881d75a52f55446440e30073ae52e727d72a731686b50b6a324fdaa06; text https://openairdocs.org/service-documents/airbus/a300-57-6011/file/cd3b1fd881d7.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2015-6550; AD 2016-18-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A300-57-6011
- Latest revision known: A300-57-6011, Revision 2, dated July 10, 1989 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/a300-57-6011

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2016-18-08](https://openairdocs.org/ad/2016-18-08.md), effective Oct 20, 2016: Revisions 1 and 2

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a300-57-6011/proposed.md).

## Text (13 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2015-6550; AD 2016-18-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

• A300-600
AIRBUS INDUSTRIE
PRODUCT SUPPORT DIRECTORATE
1 ROND POINT MAURICE BELLONTE
31707 BLAGNAC CEDEX FRANCE
Tel. : (33) 61-93-33-33
Telex: AIRBU 530526F
SERVICE BULLETIN CHANGE NOTICE
S. B. No. A300-57-6011  REV-2  DATED: Dec 17/86
MOD. NO.6661H1033
TITLE: WINGS - AUXILIARY STRUCTURE - TO INTRODUCE IMPROVED AFT HINGE BRACKETS
TO OUTER SHROUD BOX
MODEL: ALL models listed on the S-B.
DESCRIPTION:
This notice is issued to inform the affected operators that subject Service
Bulletin is changed as stated below.
Service Bulletin
Page 1 paragraph 1.A. (2)
read:  Customer and  Qty of Kits
Fleet No.  MSN  A300-57-6011
-A01
KE 501-503  361, 365, 358
KU 101-103  327,332,  344
LH 601-607  380, 391, 401, 405, 408, 411, 414.  7
RF 001,051  354,374
SV 001-011  284, 294, 301, 307, 312, 317, 321
336, 341,348, 351  11
TG 051-056  368, 371, 377, 384, 395, 398
XQ-001  1
AA-050  423  1
instead of:  Customer and  Qty of Kits
Fleet No.  MSN  A300-57-6011
-A01
KE501-503  361, 365, 358
KU101-103  327,332, 344
LH601-607  380, 391, 401, 405, 408, 411, 414
RFO01, 051  354,374
SV001-011  284, 294, 301, 307, 312, 317, 321,
336, 341, 348,351  11
TG051-056  368, 371, 377, 384, 395, 398
XX  252,423
This change will be incorporated in the next revision of this Service Bulletin;
however no revision is planned at the present time.
FILING INSTRUCTIONS
File this Change Notice in front of this Service Bulletin.
SERVICE BULLETIN No: A300-57-6011
7 DATE: Mar 20/90  CHANGE NOTICE No. :2A
Printed in France

### Page 2 (OCR)

• A300-600
AIRBUS INDUSTRIE
PRODUCT SUPPORT DIRECTORATE
1 ROND POINT MAURICE BELLONTE
31707 BLAGNAC CEDEX FRANCE  SERVICE BULLETIN
Tel (33) 61-93-33-33  REVISION TRANSMITTAL SHEET
Telex AIRBU 530526 F
MODIFICATION No: 6661H1033  ATA SYSTEM: 57
T IT L E: WINGS - AUXILIARY STRUCTURE - TO INTRODUCE IMPROVED AFT HINGE
BRACKETS TO OUTER SHROUD BOX.
Find herewith Revision No.2 of SB.A300-57-6011. No additional work is
required by this revision.
REASON
To inform Operators of revised clearances when installing new hinge
brackets.
SUMMARY
Page 1 - Inclusion of Change Notices 1A and 1B. Revision No.2 added.
SERVICE BULLETIN
Page 1  - Inclusion of Change Notice 1B. Revision No.2 added.
Page 2  - Inclusion of Change Notice 1A. DESCRIPTION sub-para (3)
revised. Revision No.2 added.
Page 5  - Paragraph 2.A.(1) (c) revised. Revision No.2 added.
Page 7-8  - Paragraph 2.C.(2) revised. Revision No.2 added.
Page 11-12 - Drawing change. Revision No.2 added.
FILING INSTRUCTIONS
1. Remove and destroy page 1 of the Summary and pages 1,2,5,7-8 and 11-12.
2. Insert page 1 of the Summary and pages 1,2,5,7-8 and 11-12 at Revision
No. 2.
REVISION SEQUENCE
ORIGINAL - DEC 17/86
REVISION NO.1 - MAR 19/87
REVISION NO.2 -
7 DATE: DEC 17/86  SERVICE BULLETIN No: A300-57-6011
REVISION No: 2 JUL 10/89  Printed in France  PAGE: 1 of 1

### Page 3 (OCR)

• A300-600
AIRBUS INDUSTRIE
PRODUCT SUPPORT DIRECTORATE
1 ROND POINT MAURICE BELLONTE  SERVICE BULLETIN
31707 BLAGNAC CEDEX FRANCE  SUMMARY
Tel (33) 61-93-33-33
Telex AIRBU 530526 F
This summary is for information only and
is not D.G.A.C. approved for modification of the aircraft
MODIFICATION No: 6661H1033  ATA SYSTEM: 57
T I T L E: WINGS - AUXILIARY STRUCTURE - TO INTRODUCE IMPROVED AFT HINGE
BRACKETS TO OUTER SHROUD BOX
REASON
Cracking of hinge bracket assemblies, which are situated on the outer
shroud box and form the rear attachment between the inner and outer shroud
boxes, has been discovered during routine maintenance checks on some
in-service A300 aircraft which had accumulated between 15150 and 20380
flights and 14070 to 18740 flight hours. Failure of the bracket would
allow vertical movement of the inner shroud box structure in the immediate
area and probable fouling of the inboard flap top skin. Additionally, the
loads carried through this bracket will be transferred to the remaining
supports which may eventually crack; extensive structural damage could
then result.
Inspection Service Bulletin (ISB) A300-57-6010 details methods of
detecting cracked brackets. Embodiment of this modification renders
further compliance with ISB A300-57-6010 unnecessary.
This Service Bulletin introduces new Steel Brackets to replace the
existing aluminium alloy brackets in order to improve the fatigue Life.
This Service Bulletin is subject to airworthiness authorities monitoring.
ACTION
At each wing the No.1 inner airbrake is removed. The inner shroud box
attachment bolts are removed and the shroud box is raised to allow removal
of the existing aluminium alloy bracket assembly. A new, steel bracket
assembly is installed. The inner airbrake is reinstalled and function
tested.
EFFECTIVITY
This modification is applicable by Service Bulletin on the following
A300-600 aircraft: - 252,284,294,301,307,312,317,321,327,332,336,341,344,
348,351,354, 358,361,365,368,371,374,377,380,384,391,395,398,401,405,408,411
and 423. Embodied prior to delivery on aircraft MSN 388,417,420,459 and
subsequent.
COMPLIANCE
Recommended
7 DATE: DEC 17/86  SERVICE BULLETIN REF:A300-57-6011
Printed in France
REVISION NO: 2 DUL 10/89  PAGE: 1 of 2

### Page 4 (OCR)

AIRBUS ..  • NOUSTRIE
A300-600 SERVICE BULLETIN
SUMMARY
MANPOWER
Kit No.A300-57-6011-A01
Manhours : 26.75
Elapsed time (hours, 2 fitters) 13.75
MATERIAL INFORMATION
Kit No. A300-57-6011-A01
2 Hinge Bracket Assemblies, 18 Cotter pins, 20 Nuts.
BRACKET ASSEMBLY
OUTER SHROUD BOX
DATE: DEC 17/86  SERVICE BULLETIN REF: A300-57-6011
REVISION NO:  Printed in France  PAGE: 2 of 2

### Page 5 (OCR)

• A300-600
AIRBUS INDUSTRIE
PRODUCT SUPPORT DIRECTORATE
1 ROND POINT MAURICE BELLONTE
31707 BLAGNAC CEDEX FRANCE  A300-600 SERVICE BULLETIN
Tel (33) 61-93-33-33
Telex AIRBU 530526 F
MODIFICATION No: 6661H1033  ATA SYSTEM: 57
T I T L E : WINGS - AUXILIARY STRUCTURE - TO INTRODUCE IMPROVED AFT HINGE
BRACKETS TO OUTER SHROUD BOX
1. PLANNING INFORMATION
A. EFFECTIVITY
(1) Aircraft Models : B4-601, 84-602, B4-602R, B4-602 B4-621R, C4-620.
(2) Aircraft
Customer and  MSN  Qty of Kits
Fleet No.  A300-57-6011
-A01
KE501-503  361, 365, 358  3
KU101-103  327,332,344  3
LH601-607  380, 391, 401, 405, 408, 411, 414
RF001, 051  354,374  2
SV001-011  284, 294, 301, 307, 312, 317, 321,
336, 341, 348, 351
TG051-056  368, 371, 377, 384, 395, 398
xX  252, 423
This modification is embodied prior to delivery on aircraft MSN
388,417,420,459 and subsequent. The above effectivity and kit
allocation is based on aircraft modification status and delivery
and subsequent Airbus Service Bulletin accomplishment reported to
Airbus Industrie.
(3) Spares
None .
B.REASON
Cracking of hinge bracket assemblies, which are situated on the outer
shroud box and form the rear attachment between the inner and outer
shroud boxes, has been discovered during routine maintenance checks on
some in-service A300 aircraft which had accumulated between 15150 and
20380 flights and 14070 to 18740 flight hours. Failure of the bracket
would allow vertical movement of the inner shroud box structure in the
immediate area and probable fouling of the inboard flap top skin.
Additionally, the loads carried through this bracket will be
transferred to the remaining supports which may eventually crack;
extensive structural damage could then result.
7 DATE: DEC 17/86  SERVICE BULLETIN No: A300-57-6011
REVISION No: 2 JUL 10/89 Printed in Franco  PAGE: 1 of 13

### Page 6 (OCR)

O AJUU-DUU
Inspection Service Bulletin (ISB) A300-57-6010 details methods of
detecting cracked brackets. Embodiment of this modification renders
further compliance with ISB A300-57-6010 unnecessary.
This Service Bulletin introduces new Steel Brackets to replace the
existing aluminium brackets in order to improve the fatigue life.
This Service Bulletin is subject to airworthiness authorities
monitoring.
C.DESCRIPTION
Accomplishment of this Service Bulletin consists of i-
AIRCRAFT
Kit No.A300-57-6011-A01. ALL aircraft Listed in Para.1.A. (2).
(1) Removing inner airbrake No.1, LH and RH.
(2) Removing access panels.
(3) Checking for equal clearance between the bearing and bracket taces
of the forward attachment bracket.
(4) Removing 42 bolts attaching landing gear bay top panel to inner
shroud box.
(5) Removing inner shroud box attaching bolts.
(6) Raising inner shroud box sufficient to gain access to hinge
bracket.
(7) Removing existing aft hinge bracket.
(8) Installing new steel Hinge Brackets at existing positions.
(9) Re-installing inner shroud boxes.
(10) Re-installing and function testing inner airbrakes.
(11) Closing up all access panels.
D. APPROVAL
This Service Bulletin is approved by Direction Generale de L'Aviation
Civile - FRANCE (D.G.A.C.).
7 DATE: DEC 17/86  SERVICE BULLETIN No: A300-57-6011
Printed in France
REVISION No: 2 JUL 10/89  PAGE: 2

### Page 7 (OCR)

AIRBUS !  J 'NOUSTRIE
A300-600 SERVICE BULLETIN
E. MANPOWER
Manhours per aircraft  Kit No. A300-57-6011-
A01
Gain access  9.25
Removal of Brackets  1.00
Installation of new Brackets  6.50
Close up and test  10.00
TOTAL MANHOURS  26.75
ELAPSED TIME (HOURS) (2 FITTERS)  13.75
NOTE: This Service Bulletin assumes that the aircraft has been placed in
a maintenance status. The manhours/elapsed time do not include
preparation for the modification, non-productive elapsed time or
administrative functions.
F. MATERIAL - COST AND AVAILABILITY
Refer to Paragraph 3 - MATERIAL INFORMATION.
G. TOOLING - COST AND AVAILABILITY
None.
H. WEIGHT AND BALANCE
MEW  + 0.72 kg (+ 1.58 lb)
Moment + 23.5 kg.m (+ 169.92 lb ft)
1. REFERENCES
Aircraft Maintenance Manual (AMM) 06-41-57, 27-61-54, 20-31-00
Inspection Service Bulletin (ISB) A300-57-6010
J. PUBLICATIONS AFFECTED
Illustrated Parts Catalog (IPC) 57-51-11
Structural Repair Manual (SRM) 57-51-11
DATE:  SERVICE BULLETIN No: A300-57-6011
REVIETON NO: 1 M1B 10/27  Printed in France  PAGE• 4-L

### Page 8 (OCR)

• A300-600
2. ACCOMPLISHMENT INSTRUCTIONS
AIRCRAFT
A „GENERAL
WARNING : BEFORE PROCEEDING WITH MAINTENANCE WORK ON OR NEAR
MECHANICAL FLIGHT CONTROLS OR PRIMARY FLIGHT CONTROL
SURFACES, LANDING GEARS, ASSOCIATED DOORS OR ANY MOVING
COMPONENT MAKE CERTAIN THAT GROUND SAFETIES AND/OR WARNING
NOTICES ARE IN CORRECT POSITION TO PREVENT INADVERTENT
OPERATION OF CONTROLS.
The following instructions are applicable to both LH and RH wings.
(1) Job set up
(a) Refer to Aircraft Maintenance Manual (AMM 27-61-54 page block
401. Remove and retain inner airbrake No.1.
(b) Refer to AMM 06-41-57.
- Lower flap deflector panels 572AB, 572CB, 572GB, 672AB,
672CB and 672GB.
- Remove and retain access panel A57240980 from the inboard
aft edge of each outer shroud box as shown in figure 1,
view A.
- Remove and retain wing to fuselage fairing panels 577CT,
577DT, 677CT and 677DT.
(c) Refer to Figure 1 View A and Figure 2 Detail E.
- Gain access to the forward attachment point which connects
the inner shroud box to the outer shroud box.
- Using a suitable light source and mirror make sure that an
equal gap exists between the bearing and the bracket faces
as shown in Figure 2. Detail E.
- If a gap exists METHOD ONE (op.B.(3) refers) can be used to
install the new aft hinge bracket.
- If there is no gap at all METHOD TWO (op.B.(4) refers) must
be used to install the new aft hinge bracket.
(d) Refer to Figure 1, View A.
- Place suitable supports beneath the inner shroud box to
prevent excessive movement when the shroud box is released
from the wing.
- Remove and retain the 42 bolts attaching the landing gear
bay top panel to the forward edge of the inner shroud box.
- Remove and discard the cotter pins from each of the bolts at
the main attachment points denoted 'C'.
7 DATE: DEC 17/86  SERVICE BULLETIN No: A300-57-6011
REVISION No: 2 JUL 10/99 Printed in Franco  PAGE: 5

### Page 9 (OCR)

AIRBUS  , INDUSTRIE
A300-600 SERVICE BULLETIN
- Remove and retain nuts, washers and special bolts (Qty.5) from the
attachment points.
- Remove and retain the sliding bush from the aft inner to outer
shroud box attachment.
(e) Carefully raise the aft edge of the inner shroud box just sufficient
to gain access to the aft hinge bracket situated o the inboard edge
of the outer shroud box, as shown in Figure 1, View B.
NOTE: Movement of the inner shroud box is severely restricted by
electrical looms and hydraulic pipes. When raising the shroud
box ensure that the looms or pipes are not strained. Removal
of 'p'-clips will allow increased movement of the shroud box.
B. MODIFICATION
Kit No.A300-57-6011-A01
(1) Mark around the outline of the existing aft hinge bracket on the outer
shroud box using a sharpened pencil.
(2) Remove and discard the existing hinge bracket from the outer shroud box
taking note of the direction of installation and position of all the
attaching bolts. Retain bolts and washers; discard nuts.
(3) METHOD ONE. Refer to Figure 1, View B.
(a) Position the new Hinge Bracket Assembly A5724864100095, Item 1, LH,
(A5724864100195, Item 2, RH) to the pencil outline on the shroud box
and clamp.
(b) Ensure sufficient hole landings and that dimensions shown are correct.
Mark the position of holes to be drilled in the hinge bracket from the
existing vacant bolt holes in the shroud box.
(c) Remove the hinge bracket assembly from the shroud box and drill/ream
sixteen holes 0.190/0.192 in. (4.83/4.88 mm) dia. at positions
previously marked.
(d) Spotface ten holes denoted 'D' 0.5625 in. (14.3 mm) dia. (spotface
corner radius to be 0.0625 in. (1.53 mm)). Spotface to minimum depth
to provide correct nut seating. Deburr all holes. Ensure corner
radius of 0.015/0.025 in. (0.38/0.63 mm) is achieved on three holes as
shown to allow bolt heads to seat correctly. Thoroughly clean
spotfaces with Genklene (Mat.No.11-004). Restore protective treatment
using Primer (Mat. No.16-006) and Polyurethane finish (Mat.No.16-018)
(e) Install new Anchor Nuts NAS1067C3 to bracket assembly as shown with
Sealant PR1431-G (Mat.No.09-005) using new Rivets L21217024008DCA.
(f) Install new Bracket Assembly to shroud box using bolts retained in
op.B.(1) with new Nuts H19200C-3 Item 6 using Sealant PR1431-G
(Mat-No. 09-005) on interfaying surfaces, nuts & id bolts.
DATE: DEC 17/86  SERVICE BULLETIN No: A300-57-6011
REVISION NO:  Printed In France  PAGE: 6

### Page 10 (OCR)

• A300-600
(4) METHOD TWO. Refer to Figure 1 View A, and Figure 2.
(a) Refer to Figure 2 Detail 'F'. Bolt the new Hinge Bracket
Assembly A5724864100095, Item 1, LH (A5724864100195, Item 2,
RH) to the inner shroud box outboard aft attachment bracket
using the appropriate bolts retained in op.2.A.(1) (d) together
with sliding bush.
(b) Temporarily reinstall the inner shroud box to the remaining
main attachment points and suitably support.
(c) Refer to Detail 'E'. Reinstall two bolts denoted 'G' so that
the threads are just engaged, to the landing gear bay top
(d) Refer to Figure 2 Detail 'F'. Clamp new Hinge Bracket
Assembly, Item 1 LH (item 2 RH) to the outer shroud box
ensuring that a minimum gap of 0.008 in. (0.20 mm) exists
between the flange of the fixed bearing and the washer.
(e) Mark the position of holes to be drilled in the new Hinge
Bracket from the existing vacant bolt holes. Ensure that
sufficient hole landing exists.
(f) Support inner shroud box, remove and retain all bolts
installed at op.2.B. (4) (b) and (c).
(g) Refer to Figure 1, View B. Remove the new Hinge Bracket
Assembly, Item 1 LH (Item 2 RH) from the inner shroud box;
retain the bolts and sliding bush installed at op.2.B. (4)(a).
(h) Perform op.2.B.(3) (c) to 2.B.(3) (f).
C.CLOSE UP AND TEST
(1) Carefully lower the inner shroud box to its original position
lining up with attachment points.
(2) Reinstall sliding bush to the aft inner to outer shroud box
attachment. Install special bolts with nuts and washers retained
in op.A. (1) (d) and new Cotter Pins MS24665-304, Item 3 (Qty.3) and
MS24665-155, Item 4 (Qty.2), to attachment points.
(3) Reinstall attaching bolts retained in op.2.A.(1) (d) into the
Landing gear bay top panel using Sealant PR1431-G (Mat. No.09-005).
(4) Refer to AMM 27-61-54 page block 401. Re-install inner airbrake
No.1 retained at op.A. (1) (a) using new Cotter Pins MS24665-304,
Item 3, (Qty.2) and MS24665-374, Item 5, (Qty.2). Perform relevant
tests as detailed.
(5) Ensure work areas are clean and clear of tools and miscellaneous
items of equipment.
(6) Re-install all access panels removed or opened in op.A.(1) (b).
7 DATE: DEC 17/86  SERVICE BULLETIN No: A300-57-6011
Printed in France
REVISION No: 2 JUL  10/89  PAGE: 7-8

### Page 11 (OCR)

AIRBUS U)  INDUSTRIE
A300-600 SERVICE BULLETIN
OUT* BD
SEE FIGURE 2
DETAIL F
No.1 INBOARD SPOILER
ATTACHMENT POINTS  ACCESS PANEL
A572-40980
1.38 IN.
REF (35.05mm)  -(REF)
REF) (12.70mm  • 50 I  (15.24mm)  0.60 IN. (REF)
INNER SHROUD
BOX  SEE FIGURE 2
DETAIL E
REMOVE AND RETAIN BOLTS
(QTY 42) SECURING LANDING
ENSURE CORNER RADIUS ON  GEAR BAY TOP PANEL TO
HOLES (QTY 3) of 0.015/0.025IN  INNER SHROUD BOX.
TO ALLOW BOLT HEADS TO
SEAT CORRECTLY WHEN INSTALLED.  1 ‹LH>  2 (RH)
LANDING GEAR BAY
TOP PANEL
/OUTER SHROUD
VIEW SHOWING POSITION OF AFT  BOX
HINGE BRACKET ON OUTER SHROUD
BOX
VIEW LOOKING DOWN ON
INNER SHROUD BOX LH
RH SIMILAR BUT OPPOSITE
Installation of new Hinge Bracket Assembly
Figure 1
DATE: DEC 17/86  SERVICE BULLETIN No: A300-57-6011
REVISION No:  Printed in France  PAGE: 9-10

### Page 12 (OCR)

AIRBUS!  ¡INDUSTRIE
A300-600 SERVICE BULLETIN
SLIDING  MIN. 0.008 IN.
BUSH (REF)  (0.20MM)
BEARING  FIXED  (REF)-
1 CLH
• CRH
DETAIL F
MAKE SURE AN EQUAL
LANDING GEAR BAY  GAP EXISTS BETWEEN
TOP PANEL  THE BEARING AND
THE BRACKET FACES
DETAIL E
Views showing clearances when installing
the new Hinge Bracket
Figure 2
DATE: DEC 17/86  SERVICE BULLETIN No: A300-57-6011
REVISION No: 2 JUL 10/89  Printed in France  PAGE: 11-12

### Page 13 (OCR)

AIRBUS!  • INDUSTRIE
A300-600 SERVICE BULLETIN
3. MATERIAL INFORMATION
A. DATA BASIS
Quantity specified in B.(1) kit A01 is per aircraft listed in para.1.A.(2).
B. MATERIALS
(1) Parts required
ITEM  NEW PART  QTY PER KIT  DESCRIPTION  OLD PART  REMARKS
NO -  NO -  A300-57-6011-A01  NO -
A5724864100095  1  Hinge Bracket A57241917000  A, B,C
Assembly (LH)
A5724864100195  1  Hinge Bracket  A57241917001  A, B, C
Assembly (RH)
3  MS24665-304  10  Cotter pin  ApC
4  MS24665-155  4  Cotter pin  A,C
5  MS24665-374  4  Cotter pin  A,C
6  H19200C-3  20  Nut  A,C
Remarks
A - Old part discarded.
B - Hinge Bracket Assemblies are supplied with anchor nuts and rivets loose
in bag.
C - New parts required to accomplish this Service Bulletin are to be procured
by Spares Purchase Order from : AIRBUS INDUSTRIE
SPARES SUPPORT CENTER
WEG BEIM JAEGER 150
D2000 HAMBURG 63
GERMANY
(2) Special tools required
None.
(3) Materials required (Operator supplied)
DESCRIPTION  REFERENCE  QTY
AMM 20-31-00
GenkLene  Mat. No. 11-004  As required
Epoxide Primer  Mat.No. 16-006  As required
Polyurethane Finish  Mat.No. 16-018  As required
Sealant PR1431-G  Mat.No.09-005  As required
C. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None.
DATE:  SERVICE BULLETIN No: A300-57-6011
REVISION No: 1  MAR 19/87  PAGE: 13
Printed in France

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
