# Airbus Service Bulletin A300-57-6062

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 1 ("A300-57-6062R4"), 42 pages: PDF https://openairdocs.org/files/sha256/ae/17/ae178f7c4339adc007c0400415da236e5d87c79afbd6ddd7a6e8fe27ece68eff; text https://openairdocs.org/service-documents/airbus/a300-57-6062/file/ae178f7c4339.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2019-0441, the docket of AD 2019-19-17. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 1 ("A300-57-6062R5"), 167 pages: PDF https://openairdocs.org/files/sha256/f2/64/f264896231f21954c117218523341bcb0b264a5487775bc4865f7590dabe361d; text https://openairdocs.org/service-documents/airbus/a300-57-6062/file/f264896231f2.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2019-0441, the docket of AD 2019-19-17. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A300-57-6062
- Latest revision known: A300-57-6062, Revision 02, dated January 29, 1997 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/a300-57-6062

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2000-03-20 R1](https://openairdocs.org/ad/2000-03-20-R1.md), effective Aug 3, 2001: Revisions 1 and 02
- [AD 2000-03-20](https://openairdocs.org/ad/2000-03-20.md), effective Mar 28, 2000: Revisions 1 and 02

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/airbus/a300-57-6062/proposed.md).

## Text (42 pages)

Revision 1, the newest copy. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2019-0441, the docket of AD 2019-19-17. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

• A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
AIRBUS INDUSTRIE
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice BELLONTE
31707 BLAGNAC CEDEX FRANCE
Tel: (33) 5 61-93-33-33
Telex : AIRBU 530526 F
TITLE : WINGS - CENTER SECTION - INSPECTION OF FRAME 40 FWD FITTING
RADIUS AT TENSION BOLT JUNCTION.
MODIFICATION No. NONE  ATA SYSTEM : 57
This page transmits Revision No. 04 of Service Bulletin
No. A300-57-6062.
ADDITIONAL WORK
No additional work is required by this revision for aircraft modified by
any previous revision.
An inspection will be necessary for any aircraft which has exceeded the
threshold after accomplishment of Service Bulletin No. A300-57-6084.
HISTORY OF PREVIOUS REVISIONS
Revision No. 1 issued to include new inspection thresholds and intervals
and new access door in the Service Bulletin, in the event of crack
findings.
Revision No. 02 issued to inform airlines that the inspection thresholds
and intervals are modified and the manufacturing procedure of the access
door on the wing is modified. Kit A01 and Kit A02 are replaced by new
Kit A01. The new Kit A01 does not include the material necessary for
manufacturing of the butt strap and access door. Therefore the airline
will deal with material procurement. The old Kits A01 and A02, already
delivered, can be used and in this case the airline does not supply the
material.
Revision No. 03 issued to introduce a reference to Service Bulletin No.
A300-57-6084, which details the repair to be performed if cracks are
found outside the Limits given in this Service Bulletin. Furthermore,
this revision includes the inspection program to be followed after
repair per Service Bulletin No. A300-57-6084.
5 DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 04 - Nov 12/02  PAGE : 1 Of 2
Printed in France

### Page 2 (OCR)

• A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REASON
Revision No. 04 introduces the Fatigue Rating in the
Para. Accomplishment Timescale.
CHANGES
SERVICE BULLETIN SUMMARY
Page 1 of 5 - Para. EFFECTIVITY, customer PFD added.
SERVICE BULLETIN
Pages 1 of 47 thru 3 - Para. 1.A. (2), EFFECTIVITY updated.
Page 5  - Para. 1.B. (5), NOTE 1, Fatigue Rating added.
FILING INSTRUCTIONS
Replace pades SUMMARY 1 of 5
SERVICE BULLETIN 1 of 47, 2, 3 and :
Put this Revision Transmittal Sheet in front of the Service Bulletin.
REVISION SEQUENCES
ORIGINAL : Feb 14/95
REVISION No. : 1 - Jul 23/95
REVISION No. : 02 - Jan 29/97
REVISION No. : 03 - Oct 26/00
REVISION No. : 04 - Nov 12/02
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 04 - Nov 12/02  PAGE : 2
Printed in France

### Page 3 (OCR)

AIRBUS INDUSTRIE
CUSTOMER SERVICES DIRECTORATE  S A300-600
1 Rond Point Maurice BELLONTE
31707 BLAGNAC CEDEX FRANCE  SERVICE BULLETIN
Tel: (33) 5 61-93-33-33
Telex : AIRBU 530526 F  SUMMARY
This summary is for information only and is not approved for
modification on the aircraft.
TITLE : WINGS - CENTER SECTION - INSPECTION OF FRAME 40 FWD FITTING RADIUS
AT TENSION BOLT JUNCTION.
MODIFICATION No. NONE  ATA SYSTEM : 57
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
15 cases of cracking have been reported in the radius of frame 40,
adjacent to the tension bolts at the center wing/outer wing junction.
The cracks were discovered during sampling inspections per A300 SSID
(SSD 53-65-48) on A300 fleet and during application of Service Bulletin
No. A300-57-6062 on A300-600 fleet.
The A300 aircraft concerned, 5 A300B2 and 9 A300B4, had accumulated
between 15,000 and 24,000 flight cycles (FC).
The A300-600 aircraft concerned had accumulated 9000 flight cycles (FC).
Cracks, if undetected, could lead to a reduction in the residual
strength of the structure and lead to extensive repairs.
This Service Bulletin calls for an Ultrasonic Inspection of the radius
adjacent to the tension bolts at FR40, at center wing/outer wing
junction.
For aircraft that have carried out the  repair in accordance with Service
Bulletin No. 57-6084 (or aircraft previously repaired in accordance with
Repair Drawing R571 10230) this Service Bulletin calls for a
High Frequency Eddy Current (HFEC) inspection for crack reinitiation in
the FR40 external flange adjacent to STGR 27 and STGR 28. The inspection
also calls for a HFEC inspection around the fasteners at the level of
the upper tension bolt.
This inspection will make it possible to detect crack propagation at an
early stage, thus avoiding an extensive repair.
This Service Bulletin has been rendered mandatory as per Airworthiness
Directive/Consigne de Navigabilité No. 95-063-177(B).
EFFECTIVITY
This Service Bulletin is applicable to these customers :
AAL, AWW, CAL, CBF, CCA, CNW, CTB, DLH, FDX, IRA, JAS, KAC, KAL, MON,
MSR, OAL, PFD, SVA, THA, UAE, XF, XJ, XO, XQ, ZA.
5 DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 04 - Nov 12/02  PAGE : 1 of 5
Printed in France

### Page 4 (OCR)

9 A300-600
SERVICE BULLETIN SUMMARY
SERVICE BULLETIN/MODIFICATION TO BE ACCOMPLISHED PREVIOUSLY OR
SIMULTANEOUSLY
None.
REFERENCES/REPERCUSSIONS
TFU  : None
OEB  : None
AOT  : None
SIL  : None
LIFE LIMIT  : None
LINE MAINTENANCE AFFECTED : NO
OTHER  : OIT AI/SE/999.0132/96 BC
NATURE OF THE MODIFICATION
AIRCRAFT  YES
EQUIPMENT  NO
HARD  NO
SOFT  NO
OBRM  NO
COMPLIANCE
Mandatory.
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 2
Printed in France

### Page 5 (OCR)

• A300-600
SERVICE BULLETIN SUMMARY
MANPOWER
Ultrasonic inspection (for one side)
TOTAL MANHOURS  3.0
ELAPSED TIME (HOURS)  3.0
Cut-out for access (for one side)
TOTAL MANHOURS  30.0
ELAPSED TIME (HOURS)  20.0
Eddy current inspection (for one side)
TOTAL MANHOURS  6.0
ELAPSED TIME (HOURS)  6.0
Blend out of crack (for one side)
TOTAL MANHOURS  5.0
ELAPSED TIME (HOURS)  5.0
Eddy current inspection (for one side)
after accomplishment of Service Bulletin
No. A300-57-6084
TOTAL MANHOURS  6.0
ELAPSED TIME (HOURS)  6.0
MATERIAL INFORMATION
AIRCRAFT DATA
None -
EQUIPMENT DATA
None.
APPENDICES
None.
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 3
Drintad in Eranco

### Page 6 (OCR)

• A300-600
SERVICE BULLETIN SUMMARY
в Q
EWD  B a FRAO
AREA TO BE
INSPECTED
BY ULTRASONIC
INSPECTION
SECTION A A
RIB1
INNER WING TANK  CENTER TANK
FR40
COMPARTMENT
CARGO
ASB5 576062 SU 01  CRACK  SKIN  AREA TO BE
FUSELAGE  INSPECTED
BY ULTRASONIC
INSPECTION
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 1 - JuL 23/95  PAGE : 4
Printed in France

### Page 7 (OCR)

• A300-600
SERVICE BULLETIN SUMMARY
LH SIDE SHOWN
RH SIDE SYMMETRICAL
STGR27  JA
++++
*++  TITANIUM
DOUBLER  SECTION AA
STGR28
CENTER  INNER WING TANK
TANK
XXX AREA TO BE INSPECTED
FR40
COMPARTMENT
CARGO
TITANIUM  SKIN  CRACK
DOUBLER  FUSELAGE
VARIANT
STGR26
STGR27
CRACK
STGR27
STGR28
ASB5 576062 SV 00  CRACK
STGR28
INSPECTION AFTER ACCOMPLISHMENT OF SERVICE BULLETIN A300-57-6084
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 5
Printed in France

### Page 8 (OCR)

AIRBUS INDUSTRIE
CUSTOMER SERVICES DIRECTORATE  $ A300-600
1 Rond Point Maurice BELLONTE
31707 BLAGNAC CEDEX FRANCE  SERVICE BULLETIN
Tel: (33) 5 61-93-33-33
Telex : AIRBU 530526 F
TITLE : WINGS - CENTER SECTION - INSPECTION OF FRAME 40 FWD FITTING RADIUS
AT TENSION BOLT JUNCTION.
MODIFICATION No. NONE  ATA SYSTEM : 57
1. PLANNING INFORMATION
A. EFFECTIVITY
(1) Aircratt models : B4-001, B4-00S, B4-603R, F4-605R, B4-620, B4-622,
B4-622R, C4-605R/F, C4-620.
(2) Aircraft
Customer and  MSN  Kit No.  Qty
Fleet No.  576062  of Kits
AAL050-055  423,459,460,420,461,462  A01  12
056-061  463,405,406,469,470,471  A01  12
062-067  474,506,507,508,509,510  A01  12
068-073  511,512,513,514,515,516  A01  12
074-079  517,606,610,612,615,619  A01  12
080-084  626,639,643,645,675  A01  10
AWW001-006  611,613,630,633,664,668  A01  12
007,008  688,690  A01  04
CAL601-603  529,533,536  A01  06
606-609  666,767,775,788  A01  08
651-655  743,625,677,555,559  A01  10
CBF701-706  733,734,739,750,756,762  A01  12
CCA601-606  521,525,532,707,732,746  A01  12
607  A01  02
651-653  709,713,715  A01  06
CNW001-003  725,741,763  A01  06
CTB001,002  755,758  A01  04
DLH601-606  380,391,401,405,408,411  A01  12
607-611  414,546,553,618,623  A01  10
651  A01  02
671  A01  02
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 04 - Nov 12/02  PAGE : 1 of 47
Printed in France

### Page 9 (OCR)

G A300-600
SERVICE BULLETIN
Customer and  MSN  Kit No.  Qty
Fleet No.  576062  of Kits
FDX650-655  726,728,735,736,738,742  A01  12
656-661  745,748,752,757,759,760  A01  12
662-665  761,766,768,769  A01  08
667-672  771,772,774,777,778,779  A01  12
673-678  780,781,789,790,791,792  A01  12
679-684  793,794,799,800,801,602  A01  12
685,686  803,804  A01  04
IRA601,602  723,727  A01  04
JAS001-006  602,617,621,637,641,670  A01  12
007-012  679,683,703,711,724,729  A01  12
013-018  730,737,740,753,770,783  LOV  12
019  LOV  02
KАC601-605  673,694,699,719,721  10
KAL501-503  361,365,358  LOY  06
551-556  477,479,388,417,543,554  12
557,558  560,582  LOV  04
560-565  609,614,027,631,662,685  LOV  12
566-569  692,717,722,731  LOV  80
MONO01-004  540,556,604,605  A01  08
MSR001-006  557,561,572,575,579,581  12
007-009  601,607,616  LOV  06
OAL001,002  632,696  LOV  04
PFD001  354  LOV  02
SVA001-006  284,294,301,307,312,317  A01  12
007-011  321,336,341,348,351  A01  10
THA051-056  368,371,377,384,395,398  A01  12
057-062  464,518,566,569,577,628  A01  12
063-068  629,635,681,705,782,784  A01  10
069-071  785,786,787  A01  06
UAE 101-105  505,558,563,608,701  A01  10
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 04 - Nov 12/02  PAGE : 2
Printed in France

### Page 10 (OCR)

© A300-600
SERVICE BULLETIN
customer  and  MSN  Kit No.  Qty
Fleet No.  576062  of Kits
XF 501  744  A01  02
503  749  A01  02
XJ 001,002  657,659  A01  04
xo 001,002  584,603  A01  04
XQ 001  252  A01  02
051  530  A01  02
ZA 103  344  A01  02
NOTE: Kit No. 576062A01 valid for one side, covers addition of an
access door in the event of crack findings.
To do the repair on the LH and RH sides, two kits A01 are
necessary.
This document contains Airbus Industrie PROPRIETARY INFORMATION and
shall at all times remain the property of Airbus Industrie; no
intellectual property right or Licence is granted by Airbus
Industrie in connection with any information contained in it. It is
delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall
not be used for any purpose other than that for which it is hereby
delivered. It shall not be disclosed in whole or in part to third
parties and shall not be duplicated in any manner (except for the
purposes of performing the tasks described hereunder and provided
that any recipient of such document shall comply with the conditions
herein), without Airbus Industrie's prior written consent.
(3) Spares
None.
B. REASON
(1) History
15 cases of cracking have been reported in the radius of frame 40,
adjacent to the tension bolts at the center wing/outer wing
junction. The cracks were discovered during sampling inspections
per A300 SSID (SSD 53-65-48) on A300 fleet and during application
of Service Bulletin No. A300-57-6062 on A300-600 fleet.
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 04 - Nov 12/02  PAGE : 3
Printed in France

### Page 11 (OCR)

• A300-600
SERVICE BULLETIN
The A300 aircraft concerned, 5 A300B2 and 9 A300B4, had accumulated
between 15,000 and 24,000 flight cycles (FC).
The A300-600 aircraft  concerned had accumulated 9000 flight cycles
(FC) -
Cracks, if undetected, could lead to a reduction in the residual
strength of the structure and lead to extensive repairs.
(2) Objective/Action
This Service Bulletin calls for an Ultrasonic Inspection of the
radius adjacent to the tension bolts at FR40, at center wing/outer
wing junction.
For aircraft that have carried out the repair in accordance with
Service Bulletin No. 57-6084 (or aircraft previously repaired in
accordance with Repair Drawing R571 10230) this Service Bulletin
calls for a High Frequency Eddy Current (HFEC) inspection for crack
reinitiation in the FR40 external flange adjacent to STGR 27 and
STGR 28. The inspection also calls for a HFEC inspection around the
fasteners at the level of the upper tension bolt.
(3) Advantages
This inspection will make it possible to detect crack propagation
at an early stage, thus avoiding an extensive repair.
(4) Operation/Maintenance Consequences
None -
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 4
Printed in France

### Page 12 (OCR)

© A300-600
SERVICE BULLETIN
(5) Accomplishment Timescale
(a) Inspection before accomplishment of Service Bulletin
No. A300-57-6084.
INTERVAL (FLIGHT)
Crack removed or stop holes drilled
THRESHOLD  No crack  Blend out ≤ 50 mm Long. (1.968 in.)
(FLIGHT)  detected  ≤ 2 mm depth. (0.078 in.)
7600  6900  3000
(b) New inspection after accomplishment of Service Bulletin
No. A300-57-6084 (further to crack finding).
* From repair date
THRESHOLD*  INTERVAL
(FLIGHT)  (FLIGHT)
11100  3000
NOTE : If the titanium repair doubler per Service Bulletin
No. A300-57-6084 has been installed, it will be necessary to
perform rework of the vertical radius and perform repeat
inspections per Para. 2.B.(2) of this Service Bulletin.
B4-600 type: Where A/C are between 1500 flights less than
threshold or have exceeded the threshold by less than
2000 flights, the first inspection is to be performed
within 1500 flights after receipt of this Service
Bulletin.
For A/C which have exceeded the threshold by more
than 2000 flights, the first inspection is to be
performed within 750 flights after receipt of this
Service Bulletin.
NOTE 1: The threshold and intervals given in this Service Bulletin
have been established according to the methodology of the
MRB Section D.
The Fatigue Rating to be applied for this Service Bulletin
is 0.13.
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 04 - Nov 12/02  PAGE : 5
Printed in France

### Page 13 (OCR)

G A300-600
SERVICE BULLETIN
NOTE 2 : Refer to the MRB Section D for instructions on dealing
with touch and go flights.
NOTE 3 : Inspection requirements given in this Service Bulletin are
for unrepaired areas, unless otherwise stated.
NOTE 4 : Where alternative inspection methods are proposed in this
Service Bulletin, the next interval is that which is
associated with the inspection method used at the current
inspection.
This Service Bulletin has been rendered mandatory as per
Airworthiness Directive/Consigne de Navigabilité No. 95-063-177(B).
C. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
(1) Get access to the working areas.
(2) Do an Ultrasonic Inspection.
If a crack is detected :
(a) Add an access door on the wing upper surface panel.
(b) Cut the fuselage lateral paneL.
(c) Remove PR in the area to be inspected.
(d) Do an Eddy Current Inspection.
(e) Repair the crack (rework and stop drilling).
Do an Eddy Current Inspection after accomplishment of Service
Bulletin No. A300-57-6084.
(4) Close-up.
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 6
Printed in France

### Page 14 (OCR)

• A300-600
SERVICE BULLETIN
D. APPROVAL
The technical content of this Service Bulletin has been approved under
the authority of the DGAC Design Organisation Approval No. F.JA.02.
If an  aircraft listed in the effectivity has a modification or repair
embodied that is not of Airbus origin, and which affects the content of
this Service Bulletin, the operator is responsible for obtaining
approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
E. MANPOWER
This Service Bulletin is written for an aircraft in a maintenance
status. The manhours/elapsed time estimates do not include the time to
prepare for the modification, non-productive elapsed time or
administration.
Ultrasonic Inspection (for one side)
Gain access  1-0
Inspection  1-0
close-up  1-0
TOTAL MANHOURS  3-0
ELAPSED TIME (HOURS)  3.0
Add access doors (for one side)
Cut-out panel for FR40 access  24-0
Cut lateral panel  6.0
TOTAL MANHOURS  30.0
ELAPSED TIME (HOURS)  20.0
Do an Eddy Current Inspection (for one side)
Remove PR, do an inspection  2.0
Close-up  4.0
TOTAL MANHOURS  6-0
ELAPSED TIME (HOURS)  6.0
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 7
Printed in France

### Page 15 (OCR)

• A300-600
SERVICE BULLETIN
Blend out of crack (for one side)
TOTAL MANHOURS  5.0
ELAPSED TIME (HOURS)  5.0
Eddy Current Inspection (for one side)
after accomplishment of Service Bulletin
No. A300-57-6084
TOTAL MANHOURS  6.0
ELAPSED TIME (HOURS)  6.0
F. MATERIAL - COST AND AVAILABILITY
(1) Material
Customers with aircraft shown in paragraph 1.A.(2) should send a
purchase order to Airbus Industrie. Quote the number of this
Service Bulletin. The address is :
AIRBUS INDUSTRIE
MATERIEL SUPPORT CENTER
P.0. BOX 63 02 62
22312 HAMBURG
GERMANY
(2) Cost and availability
Kit No-  Cost  Availability : Calendar
(US Dollars)  days from receipt of order
576062A01  410.00  120
The sales terms (costs and availability) are estimated in relation
to economic conditions at the issue date of the Service Bulletin.
The Kit availability given above is the standard lead time from the
date of your purchase order. If you require the Kit(s) before this
time, please include a retrofit planning schedule with your order
so that we can try to comply with your requirements.
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 8

### Page 16 (OCR)

• A300-600
SERVICE BULLETIN
G. TOOLING - PRICE AND AVAILABILITY
Accomplishment of this Service Bulletin entails the use of tools
described in AMM 27-80-00, P. Block 301, 27-88-11, P. Block 401 and
equipment as per NTM 57-10-39, Part 4 and Part 6, Procedure B, and
NTM 57-10-55, Part 6, Procedures A and B.
H. WEIGHT AND BALANCE
Not changed.
I. REFERENCES
Aircraft Maintenance Manuals (AMM)  : 06-21-57, 20-21-12, 24-00-00,
24-41-00, 25-22-00, 27-80-00,
27-88-11, 29-10-00, 51-23-10,
52-10-00, 52-30-00, 53-10-55
Non Destructive Testing Manual (NTM) : 57-10-39, Part 4
57-10-39, Part 6, Procedure B
57-10-55, Part 6, Procedures A and B
Airworthiness Directive  : 95-063-177(B)
Consumable Material List (CML)
Structural Repair Manual (SRM)  : 51-23-10, 51-24-00, 51-26-20,
51-40-30, 51-40-40, 51-40-46,
51-40-50
Drawing  : R53510025 Indice C
R57110230
Service Bulletin  : A300-57-6084
J. PUBLICATIONS AFFECTED
Structural Repair Manual (SRM) : 53-15-63
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 9-10
Printed in France

### Page 17 (OCR)

• A300-600
SERVICE BULLETIN
2. ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL
(1) Preparation
(a) De-energize the aircraft electrical circuits
(Refer to AMM 24-41-00, P. Block 301) and electrically ground
the aircraft (Refer to AMM 24-00-00, P. Block 301).
(b) Put the access platforms in position.
(c) Open the forward passenger/crew door 841
(Refer to AMM 52-10-00).
(d) Open the cargo door (Refer to AMM 52-30-00).
(e) In the FWD cargo compartment, LA and RH sides, remove the
partitions (Refer to AMM 53-10-55, P. Block 401).
(1) Forward of frame 40, between stringers 27 and 28, remove the
insulation blankets (Refer to AMM 25-22-00, P. Block 1).
(2) Standard practices
(a) To clean working areas using Mat. No. 11-026 (Refer to CML).
(b) To torque as per AMM 20-21-12.
(3) Work breakdown
The purpose of the synoptic chart (Refer to Figure 1, Sheet 1) is
to shown the various Inspection/Repair phases described in this
Service Bulletin.
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 11-12
Printed in France

### Page 18 (OCR)

S A300-600
SERVICE BULLETIN
Г
inspection as per
Part  4.
of frame  tension  bolt junction,  40,  fwd  Para. 1.B.(s) Per  and  radius
threshold  given in
by  gives per ird.  Repetitive  57-10-39,  inspection 4  1.B.(5)  Crack finding  for  panes cut out  access  STGR  lateral panel
Inspection by eddy
(Refer to FIG.4  deep max  current  per
sheets  and 2)  NTM  57-10-39.  Part 6.
procedure B
Inspection by  eddy
urrent
TM 57-10-3  art 6
procedure
1st  CASE  2nd CASE  3rd CASE  4th CASE
biend  Crack  11968  in mm Long  blend  Crack removed  mm Long  blend out me a  © mm Long  ble crack  one in Long
Rem titi to 39, Part 6.  form  A300-57-60 per
by  before  next  flight  noleso. 15
1.B. iven
B5 576062 FA 01 d  n casinding:  repair  of crack  per  new  er for a gon in  Repetitive  57-10-  inspection  Part 6,  Pert. A300-57-608r  before  next flight
A300-57-6084
See next sheet
In case  of  crack
See next sheet  Perform repair as per  Finding:
Figure 1, Sheet 1 of 2  before  next  flight
DATE : Feb 14/05  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE • 13-14

### Page 19 (OCR)

• A300-600
SERVICE BULLETIN
Perform  repair  as  per
S.B. A300-57-6084
Refer to FIG.3 sheet2
or sheet 3  Refer to FIG.3 sheet 1  inspection 57-10-55
HFEC  Part 6,  inspection  NTM  B37-10-55  HFEport 6, procedure  Port  NTM
given  as  per  in Para. 1.B.(5)  • procedure  threshold  given in  as  per  Para.  threshold  1.B.(5)
Crack
es  No
Repetitive inspection
Contact  AIB  for  two zones as per
before next  flight  new  intervals  Para. 1.B. (5)en  in
ASB5 576062 FB 00 d
Figure 1, Sheet 2
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 15
Printed in France

### Page 20 (OCR)

• A300-600
SERVICE BULLETIN
B. INSPECTION
When the work is completed, you must report the inspection results to
Airbus Industrie (A1/SE-A21), on the recording forms attached.
Refer to Figure 6
In case of findings, refer to the Service Bulletin instructions to do
this report, that is to say :
Immediately (maximum within 48 hours) in case of damage which is more
than the permitted or rework limits for further action(s) before next
flight.
After completion of the corrective action when damage is either in the
permitted or rework limits, or repaired as specified with the Service
Bulletin instructions.
In case of no findings, you must send the inspection record as soon as
the maintenance check or inspection report is completed.
To prepare these documents, refer to this Service Bulletin.
(1) Do an Ultrasonic Inspection as per NTM 57-10-39, Part 4.
Refer to Figures 1, 2, 4 and 5
(a) If no crack is detected, do the subsequent Ultrasonic
Inspection at the interval given in Para. 1.B.(5).
(b) If crack is detected :
Make an access door on the wing upper surface panel
(Refer to Para. 2.c.).
3 Cut the fuselage Lateral panel at FR40 between STGR27 and 28
(Refer to Para. 2.C. (4)).
3 In the area to be inspected, remove PR sealant and clean
working areas using Mat. No. 11-026 (Refer to CML).
NOTE: To remove PR sealant, use exclusively a non-metallic
spatula. In the event of scratches, polish the
surface and perform protection.
Through the new access door, do an Eddy Current Inspectior
(Refer to NTM 57-10-39, Part 6, Procedure B).
If crack is confirmed, smoothly blend out up to 2 mm
(0.078 in.) Max. deep . (Refer to Figure 5, Sheets 1 and 2).
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 16
Printed in France

### Page 21 (OCR)

© A300-600
SERVICE BULLETIN
Do another Eddy Current Inspection to make sure that the
crack has been removed. If a crack indication still exists,
follow the instruction in Figure 1, Sheet 1.
1st case: Crack removed, blend out is less than 50 mm
(1.968 in.) Length.
Repetitive inspection by NTM 57-10-39, Part 6,
Procedure B as per new intervals given in
Para. 1.B. (5).
In case of crack findings during the subsequent
repetitive inspections, perform Service Bulletin
No. A300-57-6084 (MODIFY FRAME 40 FWD
FITTING) before next flight.
NOTE: For the repetitive inspections, only
remove the fairing Item (5) or (6) and the
access door manufactured in the Para. 2.C.
2nd case: Crack removed, blend out is more than 50 mm
(1.968 in.) length.
Perform Service Bulletin No. A300-57-6084 (MODIFY
FRAME 40 FWD FITTING) before next flight.
3rd case: Crack not removed, blend out is less than 50 mm
(1.968 in.) Length.
Drill crack stop hole to dia. 4.0 mm (0.157 in.)
Min., 4.012 mm (0.158 in.) Max.
Repetitive inspection by NTM 57-10-39, Part 6,
Procedure B as per new intervals given in
Para. 1.B. (5).
In case of crack findings during the subsequent
repetitive inspections, perform Service Bulletin
No. A300-57-6084 (MODIFY FRAME 40 FWD
FITTING) before next flight.
NOTE: For the repetitive inspectioor (6) and the  remove the fairing Item (5) or
access door manufactured in the Para. 2.c.
4th case: Crack not removed blend out is more than 50 mm
(1.968 in.) length.
Drill crack stop hole to dia. 4.0 mm (0.157 in.)
Min., 4.012 mm (0.158 in.) Max. Perform Service
Bulletin No. A300-57-6084 (MODIFY FRAME 40 FWD
FITTING) before next flight.
Blank crack stop holes with stud (Mat. 2024, AU4G1), 45 mm
(1.77 in.) Max. Length, 4.012 mm (0.158 in.) Min. dia. and
4.02 mm (0.1583 in.) Max. dia.
After installation, make flush on either side.
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 17

### Page 22 (OCR)

S A300-600
SERVICE BULLETIN
1 After blend out, touch up protective finish with
Mat. No. 16-001, 16-002 and 16-020 (Refer to CML) as written
in AMM 51-23-10.
8 Install the new access door.
Refer to Figure 4, Sheet 4 and Drg R53510025
1 access door  R5351002520000  Item 0
Attach with :
13 screws  NAS1152-3  Item 10
5 screws  NAS1152-4  Item 11
NOTE: Access door and butt strap will be manufactured by
each airline on bench according to repair
Drawing R53510025 and the procedure described in
Para. 2.C. (the airline will be in charge of
procurement of the material necessary to produce
these 2 parts).
9 Install the fairing.
Refer to Figure 4, Sheet 4 and Drg R53510025
1 fairing (_ side)  Item (5)
1 fairing (R side)  Item (6)
Attach with :
1 screw  NSA5030-3-6  Item 12
1 screw  NSA5030-3-5  Item 17
1 screw  NSA5030-3-8  Item 14
Inspection after accomplishment of Service Bulletin
No. A300-57-6084 (MODIFY FRAME 40 FWD FITTING).
Refer to Figure 3, Sheets 1, 2 and 3
(a) Do an HFEC inspection of the FR40 external flange in the area
of the crack stop-holes and the upper radius
(Refer to NTM 57-10-55, Part 6, procedure B) at the threshold
given in Para. 1.8.(5)  (Refer to Figure 3, Sheets 2 and 3).
1 If no crack is detected, do the subsequent Eddy Current
Inspection at the new interval given in Para. 1.B. (5).
2 If crack is detected: Contact Airbus Industrie before next
flight.
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 18
Printed in France

### Page 23 (OCR)

• A300-600
SERVICE BULLETIN
(b) Do an HFEC inspection of the titanium fitting angle on the web,
around fasteners in the upper pocket at the level of the upper
tension bolt (Refer to NTM 57-10-55, Part 6, Procedure A), at the
threshold given in Para. 1.B.(5) (Refer to Figure 3, Sheet 1).
1 If no crack is detected, do the subsequent Eddy Current
Inspection at the new interval given in Para. 1.B.(5).
If crack is detected: Contact Airbus industrie before next
flight.
C. REPAIR
Repair for access to the area you want to inspect.
Extend slats and krueger flaps. Depressurize the Green hydraulic
system and install the locking equipment. Display a warning notice
to prohibit operation of slats and flaps (Refer to AMM 27-80-00,
P. Block 301 and 29-10-00, P. Block 301).
WARNING: AFTER EXTENSION OF THE KRUEGER FLAPS, IT IS MANDATORY TO
INSTALL THE LOCKING EQUIPMENT TO PREVENT OPERATION OF THE
KRUEGER FLAPS.
THERE IS A SERIOUS RISK OF INJURY FOR THE OPERATOR
WORKING IN THIS AREA (REFER TO AMM 27-88-11,
P. BLOCK 401).
(2)  For access, removal of the cover assy (LH and RH sides). Valid for
A/C with krueger flaps.
Refer to Figure 4
1 cover assy (LH side)  Item (1) (retain)
1 cover assy (RH side)  Item (2) (retain)
22 + 22 bolts  Item (3) (retain)
22 + 22 washers  Item (4) (retain)
(3)  Make an access door in the wing upper surface skin between FR39 and
FR40.
Refer to Figure 4, Sheets 1 of 6, 2, 3, 4 and 6 and Drg R53510025
(a) Remove :
1 fairing (LH side)  Item (5) (retain)
1 fairing (RH side)  Item (6) (retain)
(b) Remove the fasteners and do the cut-out (Refer to Figure 4,
Sheets 2 and 3 and Drg R53510025).
NOTE: Use the cut-out section to drill the new access door.
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 19
Printed in France

### Page 24 (OCR)

• A300-600
SERVICE BULLETIN
(c) Make new access door P/N R53510025200 (LH or RH side)
(Refer to Figure 4, Sheet 4, Sheet 6 and Drg. R53510025).
Put the plate in position on the aircraft and make marks.
Then, cut-out, make sure that the clearance is 1 mm
(0.0394 in.) and make a chamfer of 0.4 mm (0.0157 in.) at 15°.
(d) Make the butt straps (Refer to Figure 4, Sheet 4, Sheet 6 and
Drg. R53510025).
1 butt strap  R5351002520200 (LH side)  Item 2
1 butt strap  R5351002520300 (RH side)  Item 3
After you have put them in position on the aircraft, make
marks, cut-out and do joggling (Ref. SRM 51-26-20).
(e) Drilling of new parts.
1 Put the butt strap in position.
Drill 10 matching holes (Item 9) to dia. 3.6 mm (0.142 in.)
temporarily attach.
3 Drill 4 holes to dia. 3.6 mm in the edge (Item 11).
4 Put the access door in position.
5 Drill to match the edge attachment holes.
Drill 4 holes to dia. 2.4 mm (0.094 in.) (attachment with
the butt strap).
1 Drill the butt strap holes to match the access door holes to
between 4.9 mm (0.193 in.) and 5.0 mm (0.197 in.).
& Do countersinking.
(f) Do the protection on the access door and the butt strap.
(g) On the butt strap, install :
8 nuts MS21076-08  Item 16
Attach with :
16 rivets ABS0112-24-03  Item 8
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 20
Printed in France

### Page 25 (OCR)

• A300-600
SERVICE BULLETIN
(h) Identification of the new parts
on the access door, write R5351002520000 Item 0.
On the butt strap :
For the LH side, write R5351002520200 Item 2
For the RH side, write R5351002520300 Item 3
(i) Apply Mat. No. 09-025 (Refer to CML) and install on aircraft :
/ butt strar  R5351002520200 (LH side)  Item 2
butt stral  R5351002520300 (RH side)  Item 3
Attach with :
10 + 10 rivet NSA5412040DEJ12  Item 9
(j) On the access door angle, install 10 nuts.
10 nuts MS21076-08  Item 16
Attach with :
20 rivets ABS0112-24-03  Item 8
(k) Install 1 nut in order to make the fairing at FR40, removable.
1 nut  MS21076-3  Item 15
Attach with :
2 rivets ABS0112-24-05  Item 18
(4)  Cut the fuselage Lateral panel at FR40, between STGR27 and 28
(L or/and R side).
Refer to Figure 4, Sheet 5
NOTE: Take special care when you cut the panel.
(5)  For A/C with krueger flaps, install the cover assy (L and R sides).
Refer to Figure 4
1 cover assy (LH side)  Item (1)
1 cover assy (RH side)  Item (2)
22 + 22 bolts  Item (3)
22 + 22 washers  Item (4)
NOTE: Items (1), (2), (3), (4) were retained at removal.
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 21
Printed in France

### Page 26 (OCR)

• A300-600
SERVICE BULLETIN
D. TESTS
None.
E. CLOSE-UP
(1) Energize the aircraft electrical circuits (Refer to AMM 24-41-00,
P. B(ock 301).
(2) Remove the locking equipment and pressurize the green hydraulic
system.
(3) Retract the slats and krueger flaps (Refer to AMM 27-80-00,
P. Block 301).
(4) Close the forward passenger/crew door 841 (Refer to AMM 52-10-00).
(5) Close the cargo door (Refer to AMM 52-30-00).
(6) Disconnect the aircraft electrical ground connection
(Refer to AMM 24-00-00, P. Block 301).
(7) Remove the access platform.
F. DOCUMENTATION
Write in the applicable aircraft record that you have done all the work
in this Service Bulletin.
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 22
Printed in France

### Page 27 (OCR)

• A300-600
SERVICE BULLETIN
SECTION AA  AREA TO BE
INNER WING TANK  CENTER TANK  STGR28
FUSELAGE  REA TO B
USPECTED P
VLTPEETION
Ultrasonic Inspection of FR40 between Stringers 27 and 28
Figure 2
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE: 23-24

### Page 28 (OCR)

• A300-600
SERVICE BULLETIN
FR47
FR40  LH SIDE SHOWN
RH SIDE SYMMETRICAL
STGR27  JA
+ + +++
+++++++  TITANIUM
DOUBLER
STGR28
_ AREA TO BE INSPECTED
SECTION AA
CENTER  INNER WING TANK
TANK
FR40 -
COMPARTMENT
ASB5 576062 AK 00  CARGO  TITANIUM  SKIN  CRACK
DOUBLER  FUSELAGE
Inspection after accomplishment of Service Bulletin No. A300-57-6084
Figure 3, Sheet 1 of 3
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 25
Printed in France

### Page 29 (OCR)

© A300-600
SERVICE BULLETIN
STGR27
'CRACK
XXX AREA TO BE INSPECTED
ASB5 576062 AL 00
Inspection after accomplishment of Service Bulletin No. A300-57-6084
Figure 3, Sheet 2
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 26

### Page 30 (OCR)

$ A300-600
SERVICE BULLETIN
VARIANT
STGR26
STGR27
" CRACK
ASB5 576062 AM 00  AREA TO BE INSPECTED  STGR28
Inspection after accomplishment of Service Bulletin No. A300-57-6084
Figure 3, Sheet 3
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE: 27-28
Printed in France

### Page 31 (OCR)

S A300-600
SERVICE BULLETIN
LH SIDE VI
(1) L  (3)
(2)я
1001 2009 9 9951
Removal/Instagure 4, sheet er Assy for Access  Figure 4, Sheet 1
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE: 29-30

### Page 32 (OCR)

• A300-600
SERVICE BULLETIN
C
BEFORE
FR39  FR40
+ + + +  + + •
0.5mm
(0.0195in.)
COVERING
PLATE
CUT-OUT
• (9)
· (9)
FASTENER TO BE REMOVED
L SIDE SHOWN
R SIDE SYMMETRICAL
ASB5 576062 AF 00
Panel Cut-Out for FR40 Access
Figure 4, Sheet 2
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 31
Printed in France

### Page 33 (OCR)

© A300-600
SERVICE BULLETIN
SECTION EE
AREA REWORKED
R.10mm
(0.394in.)
AFTER CUT-OUT  PANEL EXTERNAL  AREA REWORKED
SURFACE
R.10mm
(0.394in.)
-ф-  -- ф.
R.5mm  37mm
(0.197in.)  5mm  (1.450in.)
(0.197in.)  29mm  140in.)
- SIDE SHOWN
ASB5 576062 AG 00  R SIDE SYMMETRICAI
Panel Cut-Out for FR40 Access
Figure 4, Sheet 3
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 32
Printed in France

### Page 34 (OCR)

© A300-600
SERVICE BULLETIN
C
AFTER  10  11
11  16  16
16  8
RIB1 DATUM
#- -
16
8
«≤[™›
1mm  -(5)
10.039 in.
18
SECTION HH
SECTION FF
SECTION GG
2ı
3r
ASB5 576062 AH 00  - 15°
0.4mm
(0.015in.)
Panel Installation for FR40 Access
Figure 4, Sheet 4
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE: 33-34
Printed in France

### Page 35 (OCR)

• A300-600
SERVICE BULLETIN
LH-SIDE VIEW LOOKING INBOARD
SECTION II
→  140 DATUM
5-0071 + 16-0201+
VALID R/H SIDE (SYM)
Cutting of the Fuselage Lateral Panel at FR40 between STGR27 and 28
Figure 4  Sheet
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 35-36

### Page 36 (OCR)

© A300-600
SERVICE BULLETIN
ACCESS DOOR: MATERIAL CLAD 2024T3 (Ref.ASNA3012)
PLATE DIMENSION: Length: 300mm (11.81in.)
Width: 300mm (11.81in.)
Thickness 2mm (0.078in.)
SECTION
A-A
NOTE:
PARTS TO BE MANUFACTURED
AS PER DRAWING
R53510025 AND
INSTALLATION ON A/C
BUTT STRAP: MATERIAL CLAD 2024T3 (Ref.ASNA3012)
PLATE DIMENSION: Length: 150mm (5.90in.)
ASB5 576062 AK 00 d  Thiçkness 1.6mm (0.063in.)  Width: 150mm (5.90in.)
Panel Cut-out for FR40 Access
Figure 4, Sheet 6
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 37

### Page 37 (OCR)

• A300-600
SERVICE BULLETIN
FR.39  FWD  FR.40
STGR27
(1.968 In.
BLEND OUT
2 mm(0:078 in.) DEEP MAX
50 mm (1.968 in.) LONG REF
STGR28
LATERAL PANEL•
- FR.40 FLANGE
ASB5 576062 AC 01
Rework in Case of Findings
Figure 5, Sheet 1 of 2
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 38
Printed in France

### Page 38 (OCR)

© A300-600
SERVICE BULLETIN
1st CASE: CRACK REMOVED
L≤50 mm  DEEP≤2 mm
(1.968 in.)  (0.078 in.)
L≥50 mm  DEEP ≤2 mm
(1.968 in.)  (0.078 in.)
L<50 mm  DEEP ≤2 mm
(1.968 in.)  (0.078 in.)
CRACK  Ø4mm  CRACK STOP HOLE
(0.15/in.) DIA
4th CASE: CRACK NOT REMOVED
L≥50 mm
DEEP≤2mm
(1.968 in.)
(0.078 in.)
ASB5 576062 AD 01  CRACK-  CRACK STOP HOLE
Ø4mm
(0.157in.) DIA
Rework in Case of Findings
Figure 5, Sheet 2
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE: 39-40

### Page 39 (OCR)

© A300-600
SERVICE BULLETIN
SERVICE BULLETIN No: A300-57-6062  INSPECTION REPORT
A/C MSN :  DATE OF INSPECTION:
FLIGHT CYCLES:  INSPECTION METHOD:  ULTRASON
FLIGHT HOURS:
FINDING :  YES •  NO •  YES, CRACK CONFIRMED BY EDDY CURRENT  YES •  NO D
(HF/EC)
INNER WING TANK  CENTER TANK
CRACK
NO CRACK
DEPTH  LENGTH
LEFT
SIDE
COMPARTMENT CARGO
RIGHT
SIDE
AREA TO BE INSPECTED
BY ULTRASON
SECTION A A
STGR27
AREA REPAIRED IN ACCORDANCE WITH
SB5 530310 AE 01  • SB  • AIB INSTRUCTIONS
Inspection Report
Figure 6, Sheet 1 of 3
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 41-42

### Page 40 (OCR)

• A300-600
SERVICE BULLETIN
SERVICE BULLETIN No: A300-57-6062  INSPECTION REPORT  AFTER ACCOMPLISHMENT OF SERVICE BULLETIN A300-57-6084
A/C MSN :  DATE OF INSPECTION:
FLIGHT CYCLES:  INSPECTION METHOD: HFEC
FLIGHT HOURS:
FINDING :  YES D NO D
CRACK
NO CRACK
DEPTH  LENGTH
HA SIDE SYMIMETRICAL
LEFT
- STGR27
SIDE
CRACK
TITANIUM  RIGHT
- STGR28  SIDE
OR AREA TO BE INSPECTED
ASB5 576062 AO 00  PLEASE PRECISE OTHER FINDINGS THAN CRACK •  AREA REPAIRED IN ACCORDANCE WITH :
• SB  O SaM  • AIB INSTRUCTIONS
Figure 6, Sheet 2
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE • 43-44

### Page 41 (OCR)

• A300-600
SERVICE BULLETIN
SERVICE BULLETIN No :  A300-57-6062  INSPECTION REPORT  AFTER ACCOMPLISHMENT OF SERVICE BULLETIN A300-57-6084
DATE OF INSPECTION:
FLIGHT CYCLES:  INSPECTION METHOD: HFEC
FLIGHT HOURS:
FINDING :  YES •  NO D
SECTION AA
STGR27_
TANK
DEPTH
STGR28  CRACK
NO CRACK
AREA INSPECTED
LEFT
SIDE
FUSELAGE
RIGHT
VARIANT  SIDE
STGR28
ASB5 576062 AP 00  PI EASE PRECISE OTHER FINDINGC THAN CRACK  AREA REPAIRED IN ACCORDANCE WITH
• зв  • AIB INSTRUCTIONS
Figure 6, Sheet 3
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 45-46

### Page 42 (OCR)

© A300-600
SERVICE BULLETIN
3. MATERIAL INFORMATION
A. LIST OF COMPONENTS
ITEM  NEW PART NO.  QTY KEYWORD ITEM  OLD PART No. INT INST
DISP
Kit No. 576062A01
ABS0112-24-03  36  Rivet
9  NSA5412040DEJ12  10  Rivet
10  NAS1152-3  13  Screw
11  NAS1152-4  5  Screw
12  NSA5030-3-6  1  Screw
13  NSA5030-3-9  1  Screw
14  NSA5030-3-8  1  Screw
15  MS21076-3  1  Nut
16  MS21076-08  19  Nut
17  NSA5030-3-5  1  Screw
18  ABS0112-24-05  2  Rivet
These quantities are valid for one side only.
B. SPECIAL TOOLS
None.
C. LIST OF MATERIALS - OPERATOR SUPPLIED
DESCRIPTION  REFERENCE  QTY PER A/C
CML
PR-1422-B-2  09-002  As required
Methyl-Ethyl-Ketone  11-026  As required
Polyurethane primer  16-001  As required
Grey polyurethane topcoat  16-002  As required
Wash primer  16-020  As required
Polyurethane finish paint  16-018  As required
D. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None •
DATE : Feb 14/95  SERVICE BULLETIN No. : A300-57-6062
REVISION No. : 03 - Oct 26/00  PAGE : 47
Printed in France

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
