# Airbus Service Bulletin A300-57-6117

Copy: No revision named ("SB A300-57-6117"), 538 pages: PDF https://openairdocs.org/files/sha256/6f/2d/6f2d2bec95ce78d37504851be343f4710b2cf806f91050a67dc7668edbde0f6d; text https://openairdocs.org/service-documents/airbus/a300-57-6117/file/6f2d2bec95ce.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2015-0084; AD 2017-10-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A300-57-6117
- Page: https://openairdocs.org/service-documents/airbus/a300-57-6117

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2017-10-05](https://openairdocs.org/ad/2017-10-05.md), effective Jun 29, 2017: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a300-57-6117/proposed.md).

## Text (538 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2015-0084; AD 2017-10-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A300-600
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 57
TITLE: WINGS - CENTER WINGS - INSPECTION OF FRAME 40 LOWER
OUTBOARD RADIUS FOR CRACKS
**CONF ALL
MODIFICATIONS
None
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
Further to in-service findings, mandatory Inspection Service Bulletin No. A300-57-6052 was issued
to inspect the lower outboard radius of frame 40 forward fitting. In addition, Modification Service
Bulletin No. A300-57-6053 was proposed as a terminating action of Inspection Service Bulletin No.
A300-57-6052, either as a corrective or preventive action. Recent crack findings on post-Service
Bulletin No. A300-57-6053 aircraft and a new extensive study led Airbus to define new inspection for all
aircraft with or without Service Bulletin No. A300-57-6053 applied.
The Service Bulletin No. A300-57-6053 is no longer considered as a terminative action of Inspection
Service Bulletin No. A300-57-6052.
This new Inspection Service Bulletin cancels and supersedes the Inspection Service Bulletin No.
A300-57-6052. It proposes repair solutions depending on crack length, and their associated inspection
program. In addition new areas must also be inspected inside the Center Wing Box for aircraft with
Service Bulletin No. A300-57-6053 embodied.
Accomplishment of this Inspection Service Bulletin will allow early detection of cracks avoiding long
cracks which can lead to costly and time-consuming repairs.
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 ETOPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 NO
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A300-600
SERVICE BULLETIN
SUMMARY
EVALUATION TABLE
DE-FUELING/VENTILATION
 YES
NOTE
 (1)
: Service Bulletin must be accomplished.
MATERIAL PRICE INFORMATION
**CONF 001
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Kit 576117A01R00
 2
 314.00
 Bolt, Nut
Kit 576117A02R00
 2
 1,132.00
 Bolt, Nut
Kit 576117A03R00
 2
 3,580.00
 Bolt, Nut
Kit 576117A04R00
 2
 1,236.00
 Bolt, Nut
Kit 576117A05R00
 2
 754.00
 Bolt, Nut
Kit 576117A06R00
 1
 293.00
 Bolt, Nut
Kit 576117A07R00
 2
 356.00
 Bolt, Nut
Kit 576117A08R00
 2
 1,236.00
 Bolt, Nut
Kit 576117A09R00
 1
 335.00
 Bolt, Nut
Kit 576117A10R00
 2
 104.80
 Bolt, Nut
TOTAL
 9,340.80
**CONF 002
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Kit 576117A06R00
 1
 293.00
 Bolt, Nut
Kit 576117A05R00
 2
 754.00
 Bolt, Nut
Kit 576117A09R00
 1
 335.00
 Bolt, Nut
Kit 576117A10R00
 2
 104.80
 Bolt, Nut
TOTAL
 1,486.80
**CONF 003
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Kit 576117A06R00
 1
 293.00
 Bolt, Nut
Kit 576117A05R00
 2
 754.00
 Bolt, Nut
Kit 576117A09R00
 1
 335.00
 Bolt, Nut
TOTAL
 1,382.00
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A300-600
SERVICE BULLETIN
SUMMARY
**CONF 004
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Kit 576117A01R00
 2
 314.00
 Bolt, Nut
Kit 576117A02R00
 2
 1,132.00
 Bolt, Nut
Kit 576117A03R00
 2
 3,580.00
 Bolt, Nut
Kit 576117A04R00
 2
 1,236.00
 Bolt, Nut
Kit 576117A05R00
 2
 754.00
 Bolt, Nut
Kit 576117A06R00
 1
 293.00
 Bolt, Nut
Kit 576117A07R00
 2
 356.00
 Bolt, Nut
Kit 576117A08R00
 2
 1,236.00
 Bolt, Nut
Kit 576117A09R00
 1
 335.00
 Bolt, Nut
Kit 576117A10R00
 2
 104.80
 Bolt, Nut
TOTAL
 9,340.80
**CONF 005
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Kit 576117A06R00
 1
 293.00
 Bolt, Nut
Kit 576117A05R00
 2
 754.00
 Bolt, Nut
Kit 576117A09R00
 1
 335.00
 Bolt, Nut
TOTAL
 1,382.00
**CONF 006
No Material
EFFECTIVITY
**CONF ALL
This Service Bulletin is applicable to this (these) operator(s) :
67Q ABR AHK BCS F2I FDX IRA IRM KAC MNB MSR SUD TAR
T H AU Q A U T PU Z B
CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU
 57.10.00.006
OEB
 None
AOT
 None
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A300-600
SERVICE BULLETIN
SUMMARY
SIL
 None
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 None
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 NO
HARD
 NO
SOFT
 NO
OBRM
 NO
MANPOWER
**CONF 001
Task 576117-839-801-001: Contact and Report to AIRBUS
TOTAL MANHOURS
 0.00
Task 576117-832-801-001: Special Detailed Inspection of Frame 40 Lower Outboard Radius For
Cracks for LH and RH Sides
TOTAL MANHOURS
 91.00
ELAPSED TIME (HOURS)
 45.00
Task 576117-832-802-001: Special Detailed Inspection of Frame 40 Lower Outboard Radius for
Cracks After Repair for LH and RH Sides
TOTAL MANHOURS
 32.00
ELAPSED TIME (HOURS)
 16.00
Task 576117-832-804-001: Special Detailed Inspections of the Surrounding Area of the Repair
for Cracks for LH and RH Sides
TOTAL MANHOURS
 34.00
ELAPSED TIME (HOURS)
 17.00
Task 576117-832-805-001: Special Detailed Inspection of the Surrounding Area of the Rework
for Cracks for LH and RH Sides
TOTAL MANHOURS
 34.00
ELAPSED TIME (HOURS)
 17.00
Task 576117-832-808-001: Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the
Center Wing Box for LH and RH Sides
TOTAL MANHOURS
 34.00
ELAPSED TIME (HOURS)
 17.00
Task 576117-832-806-001: Rototest Inspection of Fastener Holes in the Front Spar Lower
Flange area in the Center Wing Box for LH and RH Sides
TOTAL MANHOURS
 39.00
ELAPSED TIME (HOURS)
 19.50
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A300-600
SERVICE BULLETIN
SUMMARY
Task 576117-832-809-001: Ultrasonic Inspection of Center Wing Box Lower Panel Area for LH
and RH Sides
TOTAL MANHOURS
 32.00
ELAPSED TIME (HOURS)
 16.00
**CONF 002
Task 576117-839-801-001: Contact and Report to AIRBUS
TOTAL MANHOURS
 0.00
Task 576117-832-801-001: Special Detailed Inspection of Frame 40 Lower Outboard Radius For
Cracks for LH and RH Sides
TOTAL MANHOURS
 35.00
ELAPSED TIME (HOURS)
 17.50
Task 576117-832-804-001: Special Detailed Inspections of the Surrounding Area of the Repair
for Cracks for LH and RH Sides
TOTAL MANHOURS
 34.00
ELAPSED TIME (HOURS)
 17.00
Task 576117-832-808-001: Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the
Center Wing Box for LH and RH Sides
TOTAL MANHOURS
 34.00
ELAPSED TIME (HOURS)
 17.00
Task 576117-832-806-001: Rototest Inspection of Fastener Holes in the Front Spar Lower
Flange area in the Center Wing Box for LH and RH Sides
TOTAL MANHOURS
 39.00
ELAPSED TIME (HOURS)
 19.50
Task 576117-832-809-001: Ultrasonic Inspection of Center Wing Box Lower Panel Area for LH
and RH Sides
TOTAL MANHOURS
 32.00
ELAPSED TIME (HOURS)
 16.00
**CONF 003
Task 576117-839-801-001: Contact and Report to AIRBUS
TOTAL MANHOURS
 0.00
Task 576117-832-801-001: Special Detailed Inspection of Frame 40 Lower Outboard Radius For
Cracks for LH and RH Sides
TOTAL MANHOURS
 35.00
ELAPSED TIME (HOURS)
 17.50
Task 576117-832-805-001: Special Detailed Inspection of the Surrounding Area of the Rework
for Cracks for LH and RH Sides
TOTAL MANHOURS
 34.00
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 5
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A300-600
SERVICE BULLETIN
SUMMARY
Task 576117-832-805-001: Special Detailed Inspection of the Surrounding Area of the Rework
for Cracks for LH and RH Sides
ELAPSED TIME (HOURS)
 17.00
Task 576117-832-808-001: Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the
Center Wing Box for LH and RH Sides
TOTAL MANHOURS
 34.00
ELAPSED TIME (HOURS)
 17.00
Task 576117-832-806-001: Rototest Inspection of Fastener Holes in the Front Spar Lower
Flange area in the Center Wing Box for LH and RH Sides
TOTAL MANHOURS
 39.00
ELAPSED TIME (HOURS)
 19.50
Task 576117-832-809-001: Ultrasonic Inspection of Center Wing Box Lower Panel Area for LH
and RH Sides
TOTAL MANHOURS
 32.00
ELAPSED TIME (HOURS)
 16.00
**CONF 004
Task 576117-839-801-001: Contact and Report to AIRBUS
TOTAL MANHOURS
 0.00
Task 576117-832-801-001: Special Detailed Inspection of Frame 40 Lower Outboard Radius For
Cracks for LH and RH Sides
TOTAL MANHOURS
 90.75
ELAPSED TIME (HOURS)
 45.00
Task 576117-832-802-001: Special Detailed Inspection of Frame 40 Lower Outboard Radius for
Cracks After Repair for LH and RH Sides
TOTAL MANHOURS
 32.00
ELAPSED TIME (HOURS)
 16.00
Task 576117-832-804-001: Special Detailed Inspections of the Surrounding Area of the Repair
for Cracks for LH and RH Sides
TOTAL MANHOURS
 34.00
ELAPSED TIME (HOURS)
 17.00
Task 576117-832-805-001: Special Detailed Inspection of the Surrounding Area of the Rework
for Cracks for LH and RH Sides
TOTAL MANHOURS
 34.00
ELAPSED TIME (HOURS)
 17.00
Task 576117-832-808-001: Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the
Center Wing Box for LH and RH Sides
TOTAL MANHOURS
 34.00
ELAPSED TIME (HOURS)
 17.00
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 6
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A300-600
SERVICE BULLETIN
SUMMARY
Task 576117-832-806-001: Rototest Inspection of Fastener Holes in the Front Spar Lower
Flange area in the Center Wing Box for LH and RH Sides
TOTAL MANHOURS
 39.00
ELAPSED TIME (HOURS)
 19.50
Task 576117-832-809-001: Ultrasonic Inspection of Center Wing Box Lower Panel Area for LH
and RH Sides
TOTAL MANHOURS
 32.00
ELAPSED TIME (HOURS)
 16.00
**CONF 005
Task 576117-839-801-001: Contact and Report to AIRBUS
TOTAL MANHOURS
 0.00
Task 576117-832-801-001: Special Detailed Inspection of Frame 40 Lower Outboard Radius For
Cracks for LH and RH Sides
TOTAL MANHOURS
 33.00
ELAPSED TIME (HOURS)
 16.50
Task 576117-832-802-001: Special Detailed Inspection of Frame 40 Lower Outboard Radius for
Cracks After Repair for LH and RH Sides
TOTAL MANHOURS
 32.00
ELAPSED TIME (HOURS)
 16.00
Task 576117-832-808-001: Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the
Center Wing Box for LH and RH Sides
TOTAL MANHOURS
 34.00
ELAPSED TIME (HOURS)
 17.00
Task 576117-832-806-001: Rototest Inspection of Fastener Holes in the Front Spar Lower
Flange area in the Center Wing Box for LH and RH Sides
TOTAL MANHOURS
 39.00
ELAPSED TIME (HOURS)
 19.50
Task 576117-832-809-001: Ultrasonic Inspection of Center Wing Box Lower Panel Area for LH
and RH Sides
TOTAL MANHOURS
 32.00
ELAPSED TIME (HOURS)
 16.00
**CONF 006
Task 576117-839-801-001: Contact and Report to AIRBUS
TOTAL MANHOURS
 0.50
ELAPSED TIME (HOURS)
 0.50
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 7
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A300-600
SERVICE BULLETIN
SUMMARY
APPENDICES
**CONF ALL
Appendix 01 - NTM Task 57-10-36
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 8
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A300-600
SERVICE BULLETIN
SUMMARY
**CONF 001, 004
B
B
B
RH SHOWN
LH SYMMETRICAL
FRONT SPAR DATUM
RIB1 DATUM
FR40
FR47
A
FR40
C
Z140
A
D_SB_576117_5_SAAA_01_00
Figure A-FSAAA - Sheet 01
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 9
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A300-600
SERVICE BULLETIN
SUMMARY
**CONF 001, 004
C
VIEW LOOKING AFT
RH SHOWN
LH SYMMETRICAL
STGR33
STGR32
AREA TO BE INSPECTED
DO A ROTOTEST INSPECTION OF THE HOLE
NOTE:
AREA AAREA B
TYPICAL CRACK
D_SB_576117_5_SAAA_02_01
Figure A-FSAAA - Sheet 02
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 10
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A300-600
SERVICE BULLETIN
SUMMARY
**CONF 002 thru 005
B
B
FR40
FR47
A
RH SHOWN
LH SYMMETRICAL
B
RH SHOWN
LH SYMMETRICAL
FRONT SPAR DATUM
RIB1 DATUM
FR40
C
C
FR40
Z140
A
D E
D_SB_576117_5_SBAA_01_00
Figure A-FSBAA - Sheet 01
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 11
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A300-600
SERVICE BULLETIN
SUMMARY
**CONF 002 thru 005
VIEW LOOKING FWD
LH SHOWN
RH SYMMETRICAL
OUTBD
DO A ROTOTEST INSPECTION OF THE HOLE
FASTENERS NOT AFFECTED
NOTE:
H1
H2
H3
H4 H6
H5
VIEW LOOKING DOWN
OUTBD
H7
AREA TO BE INSPECTED
F
W
D
D
E
RH SYMMETRICAL
LH SHOWN
D_SB_576117_5_SBAA_02_00
Figure A-FSBAA - Sheet 02
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 12
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A300-600
SERVICE BULLETIN
SUMMARY
**CONF 003
B
B
B
RH SHOWN
LH SYMMETRICAL
FRONT SPAR DATUM
RIB1 DATUM
FR40
FR47
A
FR40
C
Z140
A
D_SB_576117_5_SCAA_01_00
Figure A-FSCAA - Sheet 01
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 13
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A300-600
SERVICE BULLETIN
SUMMARY
**CONF 003
NOTE:
AREA TO BE INSPECTED
VIEW LOOKING AFT
LH SHOWN
RH SYMMETRICAL
OUTBDC
STGR33
STGR32
VIEW LOOKING AFT
RH SHOWN
LH SYMMETRICAL
D
D TYPICAL COVER PLATE SHAPE
D_SB_576117_5_SCAA_02_01
Figure A-FSCAA - Sheet 02
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 14
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A300-600
SERVICE BULLETIN
SUMMARY
**CONF 002
B
B
B
RH SHOWN
LH SYMMETRICAL
FRONT SPAR DATUM
RIB1 DATUM
FR40
FR47
A
FR40
Z140
A
C
D_SB_576117_5_SDAA_01_00
Figure A-FSDAA - Sheet 01
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 15
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A300-600
SERVICE BULLETIN
SUMMARY
**CONF 002
D
VIEW LOOKING AFT
RH SHOWN
LH SYMMETRICAL
NOTE:
AREA TO BE INSPECTED
C
VIEW LOOKING AFT
RH SHOWN
LH SYMMETRICAL
D
STGR32
STGR33
TYPICAL CRACK
STOP HOLE
OUTBD
FASTENERS REMOVED FOR CLARITY01
01
D_SB_576117_5_SDAA_02_02
Figure A-FSDAA - Sheet 02
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 16
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A300-600
SERVICE BULLETIN
SUMMARY
**CONF 005
B
B
FR40
FR47
A
B
RH SHOWN
LH SYMMETRICAL
FRONT SPAR DATUM
RIB1 DATUM
FR40
Z140
A
C
D_SB_576117_5_SEAA_01_00
Figure A-FSEAA - Sheet 01
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 17
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A300-600
SERVICE BULLETIN
SUMMARY
**CONF 005
NOTE:
AREA TO BE INSPECTED VIEW LOOKING AFTRH SHOWN
LH SYMMETRICAL
OUTBD D
C
VIEW LOOKING AFT
RH SHOWN
LH SYMMETRICAL
STGR32
STGR33
D
FASTENERS REMOVED FOR CLARITY01
01
D_SB_576117_5_SEAA_02_01
Figure A-FSEAA - Sheet 02
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 18
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A300-600
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 57
TITLE: WINGS - CENTER WINGS - INSPECTION OF FRAME 40 LOWER
OUTBOARD RADIUS FOR CRACKS
MODIFICATION No.: None
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
NOTE
: This Service Bulletin is only applicable to aircraft on which Mod. No.
10221S20394 (MODIFY ANGLE FITTING AT FRAME 40) is not embodied.
(1) Models
B4-603 B4-605R B4-620 B4-622 B4-622R C4-620
(2) Effectivity by MSN
0294 0344 0358 0361 0365 0380 0388 0401 0405 0408 0411 0414 0417 0477 0479
0505 0521 0525 0529-0530 0532 0536 0543 0546 0553 0555 0557-0559 0561 0563
0572 0575 0579 0581 0584 0602-0603 0607-0608 0611 0613 0617-0618 0621 0623
0625-0626 0629-0630 0632-0633 0637 0641 0643 0657 0659 0664 0666 0668 0670
0673 0677 0679 0683 0688 0694 0696 0699 0701 0703 0707 0709 0711 0713 0715
0717 0719 0721-0725
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A300-600
SERVICE BULLETIN
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
67Q
 0584 0603
ABR
 0677
AHK
 0683
BCS
 0529 0557 0602 0617 0621 0637 0641 0670 0679 0703 0711 0724
F2I
 0294
FDX
 0358 0361 0365 0388 0417 0477 0479 0530 0536 0543 0555 0559
0572 0575 0579 0581 0611 0613 0625 0630 0633 0657 0659 0664
0668 0688 0709 0713 0715
IRA
 0632 0696 0723
IRM
 0380 0401 0405 0408 0411 0414 0546 0553 0608 0618 0623 0701
KAC
 0344 0673 0694 0699 0719 0721
MNB
 0521 0525 0532
MSR
 0561 0607
SUD
 0666
TAR
 0505 0558 0563
THA
 0629
UQA
 0626 0643
UTP
 0707 0725
UZB
 0717 0722
(4) Configuration by MSN
MSN
 CONFIGURATION
0294 0344 0358 0361 0380 0401 0405 0408 0411 0414 0505
0546 0553 0558 0563 0584 0602 0608 0617 0618 0621 0623
0626 0632 0637 0641 0643 0670 0679 0683 0694 0696 0699
0701 0703 0711 0719 0721 0723 0724
001 002 003 004
005 006
0365 0388 0417 0477 0479 0521 0525 0529 0530 0532 0536
0543 0555 0557 0559 0561 0572 0575 0579 0581 0603 0607
0611 0613 0625 0629 0630 0633 0657 0659 0664 0666 0668
0673 0677 0688 0707 0709 0713 0715 0717 0722 0725
002 003 004 005
006
(5) Configuration definition
**CONF 001
Config. 001 is valid for aircraft on which Service Bulletin No. A300-57-6053 is not
accomplished (LH and RH sides are independents).
**CONF 002
Config. 002 is valid for aircraft on which Service Bulletin No. A300-57-6053 is
accomplished and on which repair as per A300-57-6052 figure 4 (similar to Repair
Instruction R53810799) is applied or Repair Instruction R53810799 is applied (LH and
RH sides are independents).
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A300-600
SERVICE BULLETIN
**CONF 003
Config. 003 is valid for aircraft on which Service Bulletin No. A300-57-6053 is
accomplished and on which Repair Instruction R53810798 is applied (LH and RH sides
are independents).
**CONF 004
Config. 004 is valid for aircraft on which Service Bulletin No. A300-57-6053 is
accomplished and no repair applied (LH and RH sides are independents)
**CONF 005
Config. 005 is valid for aircraft on which Service Bulletin No. A300-57-6053 is
accomplished and on which repair as per A300-57-6052 figure 6 (similar to Repair
Instruction R53810797) is applied (LH and RH sides are independents).
**CONF 006
Config. 006 is valid for aircraft on which Service Bulletin No. A300-57-6053 is
accomplished and on which Repair Instruction R57110247 is applied (LH and RH sides
are independents).
(6) Material Effectivity
**CONF 001
MATERIAL
 QTY PER A/C
 SEE NOTES
Consumable CMLA01
 1
Kit 576117A01R00
 2
Kit 576117A02R00
 2
Kit 576117A03R00
 2
Kit 576117A04R00
 2
Kit 576117A05R00
 2
Kit 576117A06R00
 1
Kit 576117A07R00
 2
Kit 576117A08R00
 2
Kit 576117A09R00
 1
Kit 576117A10R00
 2
**CONF 002
MATERIAL
 QTY PER A/C
 SEE NOTES
Consumable CMLA01
 1
Kit 576117A06R00
 1
Kit 576117A05R00
 2
Kit 576117A09R00
 1
Kit 576117A10R00
 2
**CONF 003
MATERIAL
 QTY PER A/C
 SEE NOTES
Consumable CMLA01
 1
Kit 576117A06R00
 1
Kit 576117A05R00
 2
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A300-600
SERVICE BULLETIN
MATERIAL
 QTY PER A/C
 SEE NOTES
Kit 576117A09R00
 1
**CONF 004
MATERIAL
 QTY PER A/C
 SEE NOTES
Consumable CMLA01
 1
Kit 576117A01R00
 2
Kit 576117A02R00
 2
Kit 576117A03R00
 2
Kit 576117A04R00
 2
Kit 576117A05R00
 2
Kit 576117A06R00
 1
Kit 576117A07R00
 2
Kit 576117A08R00
 2
Kit 576117A09R00
 1
Kit 576117A10R00
 2
**CONF 005
MATERIAL
 QTY PER A/C
 SEE NOTES
Consumable CMLA01
 1
Kit 576117A06R00
 1
Kit 576117A05R00
 2
Kit 576117A09R00
 1
**CONF 006
No Material Set
**CONF ALL
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
Further to in-service findings, mandatory Inspection Service Bulletin No. A300-57-6052
was issued to inspect the lower outboard radius of frame 40 forward fitting. In addition,
Modification Service Bulletin No. A300-57-6053 was proposed as a terminating action of
Inspection Service Bulletin No. A300-57-6052, either as a corrective or preventive action.
Recent crack findings on post-Service Bulletin No. A300-57-6053 aircraft and a new
extensive study led Airbus to define new inspection for all aircraft with or without Service
Bulletin No. A300-57-6053 applied.
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A300-600
SERVICE BULLETIN
(2) Objective/Action
The Service Bulletin No. A300-57-6053 is no longer considered as a terminative action
of Inspection Service Bulletin No. A300-57-6052.
This new Inspection Service Bulletin cancels and supersedes the Inspection Service
Bulletin No. A300-57-6052. It proposes repair solutions depending on crack length, and
their associated inspection program. In addition new areas must also be inspected inside
the Center Wing Box for aircraft with Service Bulletin No. A300-57-6053 embodied.
(3) Advantages
Accomplishment of this Inspection Service Bulletin will allow early detection of cracks
avoiding long cracks which can lead to costly and time-consuming repairs.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
**CONF 001
Task 576117-832-801-001: Special Detailed Inspection of Frame 40 Lower Outboard Radius
For Cracks for LH and RH Sides
(1) Do a Special Detailed Inspection of Frame 40 Lower Outboard Radius For Cracks for
LH Side
(2) Do a Special Detailed Inspection of Frame 40 Lower Outboard Radius For Cracks for
RH Side
(3) Do a Rototest Inspection of the Fastener Hole on the Lower Radius Area at Frame
40 on LH Side
(4) Do a Rototest Inspection of the Fastener Hole on the Lower Radius Area at Frame
40 on RH Side
(5) Do an HFEC Inspection of the Spotface Area at Frame 40 for LH Side
(6) Do an HFEC Inspection of the Spotface Area at Frame 40 for RH Side
(7) Do a Liquid Penetrant Inspection of the Spotface Area at Frame 40 for LH Side
(8) Do a Liquid Penetrant Inspection of the Spotface Area at Frame 40 for RH Side
(9) Oversize the Fastener Hole to the Next Oversize Diameter and Install New Fastener
at Frame 40 for LH Side
(10) Oversize the Fastener Hole to the Next Oversize Diameter and Install New Fastener
at Frame 40 for RH Side
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 5
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A300-600
SERVICE BULLETIN
(11) Do a Spotfacing of the Hole of the FWD Fitting at Frame 40 for LH Side
(12) Do a Spotfacing of the Hole of the FWD Fitting at Frame 40 for RH Side
(13) Repair the Crack in the Spotface by Bushing the Hole for LH Side
(14) Repair the Crack in the Spotface by Bushing the Hole for RH Side
(15) Repair the Crack on the FWD Fitting by Cut-out for LH Side
(16) Repair the Crack on the FWD Fitting by Cut-out for RH Side
(17) Do a Crack Stop Hole on the FWD Fitting Lower Area Radius at Frame 40 for LH
Side
(18) Do a Crack Stop Hole on the FWD Fitting Lower Area Radius At Frame 40 for RH
Side
Task 576117-832-802-001: Special Detailed Inspection of Frame 40 Lower Outboard Radius
for Cracks After Repair for LH and RH Sides
(1) Do an HFEC Inspection of Frame 40 Lower Outboard Radius for Cracks for LH Side
(2) Do an HFEC Inspection of Frame 40 Lower Outboard Radius for Cracks for RH Side
Task 576117-832-804-001: Special Detailed Inspections of the Surrounding Area of the
Repair for Cracks for LH and RH Sides
(1) Do an HFEC Inspection of the Surrounding Area of the Repair for Cracks for LH Side
(2) Do an HFEC Inspection of the Surrounding Area of the Repair for Cracks for RH
Side
Task 576117-832-805-001: Special Detailed Inspection of the Surrounding Area of the
Rework for Cracks for LH and RH Sides
(1) Do an HFEC Inspection of the Surrounding Area of the Rework for Cracks for LH
Side
(2) Do an HFEC Inspection of the Surrounding Area of the Rework for Cracks for RH
Side
Task 576117-832-808-001: Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in
the Center Wing Box for LH and RH Sides
(1) Do a Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the Center
Wing Box for LH Side
(2) Do a Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the Center
Wing Box for RH Side
(3) Oversize the Fastener Hole to the Next Oversize Diameter and Install New Fastener
In Area of Rib 1 Triform for LH Side
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 6
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A300-600
SERVICE BULLETIN
(4) Oversize the Fastener Hole to the Next Oversize Diameter and Install New Fastener
In Area of Rib 1 Triform for RH Side
Task 576117-832-806-001: Rototest Inspection of Fastener Holes in the Front Spar Lower
Flange area in the Center Wing Box for LH and RH Sides
(1) Do a Rototest Inspection of Fastener Holes in the Front Spar Lower Flange area in
the Center Wing Box for LH Side
(2) Do a Rototest Inspection of Fastener Holes in the Front Spar Lower Flange area in
the Center Wing Box for RH Side
(3) Oversize the Fastener Holes to the Next Oversize Diameter and Install New Fastener
in the Front Spar Lower Flange area in the Center Wing Box for LH Side
(4) Oversize the Fastener Holes to the Next Oversize Diameter and Install New Fastener
in the Front Spar Lower Flange area in the Center Wing Box for RH Side
Task 576117-832-809-001: Ultrasonic Inspection of Center Wing Box Lower Panel Area for
LH and RH Sides
(1) Do an Ultrasonic Inspection of Center Wing Box Lower Panel Area for LH Side
(2) Do an Ultrasonic Inspection of Center Wing Box Lower Panel Area for RH Side
**CONF 002
Task 576117-832-801-001: Special Detailed Inspection of Frame 40 Lower Outboard Radius
For Cracks for LH and RH Sides
(1) Do a Special Detailed Inspection of Frame 40 Lower Outboard Radius For Cracks for
LH Side
(2) Do a Special Detailed Inspection of Frame 40 Lower Outboard Radius For Cracks for
RH Side
Task 576117-832-804-001: Special Detailed Inspections of the Surrounding Area of the
Repair for Cracks for LH and RH Sides
(1) Do an HFEC Inspection of the Surrounding Area of the Repair for Cracks for LH Side
(2) Do an HFEC Inspection of the Surrounding Area of the Repair for Cracks for RH
Side
Task 576117-832-808-001: Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in
the Center Wing Box for LH and RH Sides
(1) Do a Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the Center
Wing Box for LH Side
(2) Do a Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the Center
Wing Box for RH Side
(3) Oversize the Fastener Hole to the Next Oversize Diameter and Install New Fastener
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 7
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A300-600
SERVICE BULLETIN
In Area of Rib 1 Triform for LH Side
(4) Oversize the Fastener Hole to the Next Oversize Diameter and Install New Fastener
In Area of Rib 1 Triform for RH Side
Task 576117-832-806-001: Rototest Inspection of Fastener Holes in the Front Spar Lower
Flange area in the Center Wing Box for LH and RH Sides
(1) Do a Rototest Inspection of Fastener Holes in the Front Spar Lower Flange area in
the Center Wing Box for LH Side
(2) Do a Rototest Inspection of Fastener Holes in the Front Spar Lower Flange area in
the Center Wing Box for RH Side
(3) Oversize the Fastener Holes to the Next Oversize Diameter and Install New Fastener
in the Front Spar Lower Flange area in the Center Wing Box for LH Side
(4) Oversize the Fastener Holes to the Next Oversize Diameter and Install New Fastener
in the Front Spar Lower Flange area in the Center Wing Box for RH Side
Task 576117-832-809-001: Ultrasonic Inspection of Center Wing Box Lower Panel Area for
LH and RH Sides
(1) Do an Ultrasonic Inspection of Center Wing Box Lower Panel Area for LH Side
(2) Do an Ultrasonic Inspection of Center Wing Box Lower Panel Area for RH Side
**CONF 003
Task 576117-832-801-001: Special Detailed Inspection of Frame 40 Lower Outboard Radius
For Cracks for LH and RH Sides
(1) Do a Special Detailed Inspection of Frame 40 Lower Outboard Radius For Cracks for
LH Side
(2) Do a Special Detailed Inspection of Frame 40 Lower Outboard Radius For Cracks for
RH Side
Task 576117-832-805-001: Special Detailed Inspection of the Surrounding Area of the
Rework for Cracks for LH and RH Sides
(1) Do an HFEC Inspection of the Surrounding Area of the Rework for Cracks for LH
Side
(2) Do an HFEC Inspection of the Surrounding Area of the Rework for Cracks for RH
Side
Task 576117-832-808-001: Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in
the Center Wing Box for LH and RH Sides
(1) Do a Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the Center
Wing Box for LH Side
(2) Do a Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the Center
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 8
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A300-600
SERVICE BULLETIN
Wing Box for RH Side
(3) Oversize the Fastener Hole to the Next Oversize Diameter and Install New Fastener
In Area of Rib 1 Triform for LH Side
(4) Oversize the Fastener Hole to the Next Oversize Diameter and Install New Fastener
In Area of Rib 1 Triform for RH Side
Task 576117-832-806-001: Rototest Inspection of Fastener Holes in the Front Spar Lower
Flange area in the Center Wing Box for LH and RH Sides
(1) Do a Rototest Inspection of Fastener Holes in the Front Spar Lower Flange area in
the Center Wing Box for LH Side
(2) Do a Rototest Inspection of Fastener Holes in the Front Spar Lower Flange area in
the Center Wing Box for RH Side
(3) Oversize the Fastener Holes to the Next Oversize Diameter and Install New Fastener
in the Front Spar Lower Flange area in the Center Wing Box for LH Side
(4) Oversize the Fastener Holes to the Next Oversize Diameter and Install New Fastener
in the Front Spar Lower Flange area in the Center Wing Box for RH Side
Task 576117-832-809-001: Ultrasonic Inspection of Center Wing Box Lower Panel Area for
LH and RH Sides
(1) Do an Ultrasonic Inspection of Center Wing Box Lower Panel Area for LH Side
(2) Do an Ultrasonic Inspection of Center Wing Box Lower Panel Area for RH Side
**CONF 004
Task 576117-832-801-001: Special Detailed Inspection of Frame 40 Lower Outboard Radius
For Cracks for LH and RH Sides
(1) Do a Special Detailed Inspection of Frame 40 Lower Outboard Radius For Cracks for
LH Side
(2) Do a Special Detailed Inspection of Frame 40 Lower Outboard Radius For Cracks for
RH Side
(3) Do a Rototest Inspection of the Fastener Hole on the Lower Radius Area at Frame
40 on LH Side
(4) Do a Rototest Inspection of the Fastener Hole on the Lower Radius Area at Frame
40 on RH Side
(5) Do an HFEC Inspection of the Spotface Area at Frame 40 for LH Side
(6) Do an HFEC Inspection of the Spotface Area at Frame 40 for RH Side
(7) Do a Liquid Penetrant Inspection of the Spotface Area at Frame 40 for LH Side
(8) Do a Liquid Penetrant Inspection of the Spotface Area at Frame 40 for RH Side
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 9
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A300-600
SERVICE BULLETIN
(9) Oversize the Fastener Hole to the Next Oversize Diameter and Install New Fastener
at Frame 40 for LH Side
(10) Oversize the Fastener Hole to the Next Oversize Diameter and Install New Fastener
at Frame 40 for RH Side
(11) Do a Spotfacing of the Hole of the FWD Fitting at Frame 40 for LH Side
(12) Do a Spotfacing of the Hole of the FWD Fitting at Frame 40 for RH Side
(13) Repair the Crack in the Spotface by Bushing the Hole for LH Side
(14) Repair the Crack in the Spotface by Bushing the Hole for RH Side
(15) Repair the Crack on the FWD Fitting by Cut-out for LH Side
(16) Repair the Crack on the FWD Fitting by Cut-out for RH Side
(17) Do a Crack Stop Hole on the FWD Fitting Lower Area Radius at Frame 40 for LH
Side
(18) Do a Crack Stop Hole on the FWD Fitting Lower Area Radius At Frame 40 for RH
Side
Task 576117-832-802-001: Special Detailed Inspection of Frame 40 Lower Outboard Radius
for Cracks After Repair for LH and RH Sides
(1) Do an HFEC Inspection of Frame 40 Lower Outboard Radius for Cracks for LH Side
(2) Do an HFEC Inspection of Frame 40 Lower Outboard Radius for Cracks for RH Side
Task 576117-832-804-001: Special Detailed Inspections of the Surrounding Area of the
Repair for Cracks for LH and RH Sides
(1) Do an HFEC Inspection of the Surrounding Area of the Repair for Cracks for LH Side
(2) Do an HFEC Inspection of the Surrounding Area of the Repair for Cracks for RH
Side
Task 576117-832-805-001: Special Detailed Inspection of the Surrounding Area of the
Rework for Cracks for LH and RH Sides
(1) Do an HFEC Inspection of the Surrounding Area of the Rework for Cracks for LH
Side
(2) Do an HFEC Inspection of the Surrounding Area of the Rework for Cracks for RH
Side
Task 576117-832-808-001: Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in
the Center Wing Box for LH and RH Sides
(1) Do a Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the Center
Wing Box for LH Side
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 10
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29

@A300-600
SERVICE BULLETIN
(2) Do a Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the Center
Wing Box for RH Side
(3) Oversize the Fastener Hole to the Next Oversize Diameter and Install New Fastener
In Area of Rib 1 Triform for LH Side
(4) Oversize the Fastener Hole to the Next Oversize Diameter and Install New Fastener
In Area of Rib 1 Triform for RH Side
Task 576117-832-806-001: Rototest Inspection of Fastener Holes in the Front Spar Lower
Flange area in the Center Wing Box for LH and RH Sides
(1) Do a Rototest Inspection of Fastener Holes in the Front Spar Lower Flange area in
the Center Wing Box for LH Side
(2) Do a Rototest Inspection of Fastener Holes in the Front Spar Lower Flange area in
the Center Wing Box for RH Side
(3) Oversize the Fastener Holes to the Next Oversize Diameter and Install New Fastener
in the Front Spar Lower Flange area in the Center Wing Box for LH Side
(4) Oversize the Fastener Holes to the Next Oversize Diameter and Install New Fastener
in the Front Spar Lower Flange area in the Center Wing Box for RH Side
Task 576117-832-809-001: Ultrasonic Inspection of Center Wing Box Lower Panel Area for
LH and RH Sides
(1) Do an Ultrasonic Inspection of Center Wing Box Lower Panel Area for LH Side
(2) Do an Ultrasonic Inspection of Center Wing Box Lower Panel Area for RH Side
**CONF 005
Task 576117-832-801-001: Special Detailed Inspection of Frame 40 Lower Outboard Radius
For Cracks for LH and RH Sides
(1) Do a Special Detailed Inspection of Frame 40 Lower Outboard Radius For Cracks for
LH Side
(2) Do a Special Detailed Inspection of Frame 40 Lower Outboard Radius For Cracks for
RH Side
Task 576117-832-802-001: Special Detailed Inspection of Frame 40 Lower Outboard Radius
for Cracks After Repair for LH and RH Sides
(1) Do an HFEC Inspection of Frame 40 Lower Outboard Radius for Cracks for LH Side
(2) Do an HFEC Inspection of Frame 40 Lower Outboard Radius for Cracks for RH Side
Task 576117-832-808-001: Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in
the Center Wing Box for LH and RH Sides
(1) Do a Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the Center
Wing Box for LH Side
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 11
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 30

@A300-600
SERVICE BULLETIN
(2) Do a Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the Center
Wing Box for RH Side
(3) Oversize the Fastener Hole to the Next Oversize Diameter and Install New Fastener
In Area of Rib 1 Triform for LH Side
(4) Oversize the Fastener Hole to the Next Oversize Diameter and Install New Fastener
In Area of Rib 1 Triform for RH Side
Task 576117-832-806-001: Rototest Inspection of Fastener Holes in the Front Spar Lower
Flange area in the Center Wing Box for LH and RH Sides
(1) Do a Rototest Inspection of Fastener Holes in the Front Spar Lower Flange area in
the Center Wing Box for LH Side
(2) Do a Rototest Inspection of Fastener Holes in the Front Spar Lower Flange area in
the Center Wing Box for RH Side
(3) Oversize the Fastener Holes to the Next Oversize Diameter and Install New Fastener
in the Front Spar Lower Flange area in the Center Wing Box for LH Side
(4) Oversize the Fastener Holes to the Next Oversize Diameter and Install New Fastener
in the Front Spar Lower Flange area in the Center Wing Box for RH Side
Task 576117-832-809-001: Ultrasonic Inspection of Center Wing Box Lower Panel Area for
LH and RH Sides
(1) Do an Ultrasonic Inspection of Center Wing Box Lower Panel Area for LH Side
(2) Do an Ultrasonic Inspection of Center Wing Box Lower Panel Area for RH Side
**CONF 006
Task 576117-839-801-001: Contact and Report to AIRBUS
(1) Contact and Report to AIRBUS
**CONF ALL
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
**CONF 001
This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA) will be issued
to confirm this classification. It is anticipated that the AD will confirm the thresholds and
intervals given but reference should be made to the AD for confirmation of the mandated
accomplishment timescale.
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 12
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 31

@A300-600
SERVICE BULLETIN
Table 1, Config. 001 - Special Detailed Inspections of Frame 40 Lower Outboard Radius For Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
All aircraft
 Do a special
detailed
inspections of
Frame 40 lower
outboard radius for
cracks for LH and
RH sides in
accordance with
TASK
576117-832-801
001
- Average Flight
Time (AFT)
higher than 1.50:
1500 FC / 3300
FH
See NOTE (*)
-A F T l o w e r o r
equal to 1.50:
1650 FC / 2450
FH
See NOTE (*)
900 FC from this
Service Bulletin
issuance date
without exceeding
previous interval of
Service Bulletin No.
A300-57-6052 with
a visual detailed
inspection to be
performed every
300 FC from this
Service Bulletin
issuance date
None
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 13
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 32

@A300-600
SERVICE BULLETIN
Table 1, Config. 001 - Special Detailed Inspections of Frame 40 Lower Outboard Radius For Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
Ream up the
original hole to
next oversize
diameter and
install the new
fastener in
accordance with
SUBTASK
576117-833-001
001 for LH side
and/or SUBTASK
576117-833-008
001 for RH side
AND
Before next flight
 None
 None
Repeat the special
detailed
inspections of
Frame 40 lower
outboard radius for
cracks for LH
and/or RH sides in
accordance with
TASK
576117-832-801
001
None
 None
 - AFT higher than
1.50:
1500 FC / 3300
FH
-A F T l o w e r o r
equal to 1.50:
1650 FC / 2450
FH
OR
Apply Service
Bulletin No.
A300-57-6116
AND
Before next flight
 None
 None
If no crack found
Do an HFEC
inspection of the
lower radius area
for LH and/or RH
sides in
accordance with
TASK
576117-832-802
001
Refer to table 8
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 14
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 33

@A300-600
SERVICE BULLETIN
Table 1, Config. 001 - Special Detailed Inspections of Frame 40 Lower Outboard Radius For Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
If crack found
limited to the
existing spotfacing
Do a spotfacing in
the hole of Dia. 25
mm (0.984 in) in
accordance with
SUBTASK
576117-833-002
001 for LH side
and/or SUBTASK
576117-833-007
001 for RH side
Before next flight
 None
 None
Apply Repair
Instruction
R53810797 in
accordance with
SUBTASK
576117-833-003
001 for LH side
and/or
576117-833-010
001 for RH
AND
Before next flight
 None
 None
If crack removed
after the spotfacing
in the hole of Dia.
25 mm (0.984 in)
Do an HFEC
inspection of the
lower radius area
for LH and/or RH
sides in
accordance with
TASK
576117-832-802
001
Refer to table 2
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 15
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 34

@A300-600
SERVICE BULLETIN
Table 1, Config. 001 - Special Detailed Inspections of Frame 40 Lower Outboard Radius For Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
Apply Service
Bulletin No.
A300-57-6053
AND
Apply Repair
Instruction
R53810798 in
accordance with
SUBTASK
576117-833-004
001 for LH side
and/or SUBTASK
576117-833-006
001 for RH Side
AND
Before next flight
 None
 None
Do an HFEC
inspection of the
surrounding area
of the rework for
LH and/or RH
sides in
accordance with
TASK
576117-832-805
001
AND
Refer to table 3
If crack not
removed after the
spotfacing in the
h o l eo fD i a .2 5m m
(0.984 in)
Do a rototest
inspection of
fastener holes in
area of Rib 1
triform for LH
and/or RH sides in
accordance with
TASK
576117-832-808
001
AND
Refer to table 4
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 16
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 35

@A300-600
SERVICE BULLETIN
Table 1, Config. 001 - Special Detailed Inspections of Frame 40 Lower Outboard Radius For Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
Do a rototest
inspection of
fastener holes in
front spar lower
flange area for LH
and/or RH sides in
accordance with
TASK
576117-832-806
001
AND
Refer to table 5
If crack not
removed after the
spotfacing in the
h o l eo fD i a .2 5m m
(0.984 in)
Do an ultrasonic
inspection of
center wing box
lower panel area
for LH and/or RH
sides in
accordance with
TASK
576117-832-809
001
Refer to table 6
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 17
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 36

@A300-600
SERVICE BULLETIN
Table 1, Config. 001 - Special Detailed Inspections of Frame 40 Lower Outboard Radius For Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
Apply Service
Bulletin No.
A300-57-6053
AND
Apply Repair
Instruction
R53810798 in
accordance with
SUBTASK
576117-833-004
001 for LH side
and/or SUBTASK
576117-833-006
001 for RH side
AND
Before next flight
 None
 None
Do an HFEC
inspection of the
surrounding area
of the rework for
LH and/or RH
sides in
accordance with
TASK
576117-832-805
001
AND
Refer to table 3
If crack tip found in
the area A
Do a rototest
inspection of
fastener holes in
area of Rib 1
triform for LH
and/or RH sides in
accordance with
TASK
576117-832-808
001
AND
Refer to table 4
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 18
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 37

@A300-600
SERVICE BULLETIN
Table 1, Config. 001 - Special Detailed Inspections of Frame 40 Lower Outboard Radius For Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
Do a rototest
inspection of
fastener holes in
front spar lower
flange area for LH
and/or RH sides in
accordance with
TASK
576117-832-806
001
AND
Refer to table 5
If crack tip found in
the area A
Do an ultrasonic
inspection of
center wing box
lower panel area
for LH and/or RH
sides in
accordance with
TASK
576117-832-809
001
Refer to table 6
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 19
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 38

@A300-600
SERVICE BULLETIN
Table 1, Config. 001 - Special Detailed Inspections of Frame 40 Lower Outboard Radius For Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
Apply Service
Bulletin No.
A300-57-6053
AND
Apply Repair
Instruction
R53810799 in
accordance with
SUBTASK
576117-833-004
001 for LH side
and/or SUBTASK
576117-833-009
001 for RH side
AND
Before next flight
 None
 None
HFEC inspection
of the surrounding
area of the repair
for LH and/or RH
sides in
accordance with
TASK
576117-832-804
001
AND
Refer to table 7
If crack tip found in
the area B:
Do a rototest
inspection of
fastener holes in
area of Rib 1
triform for LH
and/or RH sides in
accordance with
TASK
576117-832-808
001
AND
Refer to table 4
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 20
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 39

@A300-600
SERVICE BULLETIN
Table 1, Config. 001 - Special Detailed Inspections of Frame 40 Lower Outboard Radius For Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
Do a rototest
inspection of
fastener holes in
front spar lower
flange area for LH
and/or RH sides in
accordance with
TASK
576117-832-806
001
AND
Refer to table 5
If crack tip found in
the area B:
Do an ultrasonic
inspection of
center wing box
lower panel area
for LH and/or RH
sides in
accordance with
TASK
576117-832-809
001
Refer to table 6
If crack tip found
beyond the area B
Contact Airbus
 Before next flight
 None
 None
NOTE (*): Thresholds to be counted from last accomplishment date of Service Bulletin No.
A300-57-6052.
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 21
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 40

@A300-600
SERVICE BULLETIN
Table 2, Config. 001 - Special detailed inspection of Frame 40 lower outboard radius for cracks after
repair for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
All aircraft
 Do an HFEC
inspection of the
lower radius area
for LH and/or RH
sides in
accordance with
TASK
576117-832-802
001
- AFT higher than
1.50:
6400 FC / 13800
FH
See NOTE (*)
-A F T l o w e r o r
equal to 1.50:
6900 FC / 10300
FH
See NOTE (*)
None
 None
If no crack found
 Repeat the HFEC
inspection of the
lower radius for
LH and/or RH
sides in
accordance with
TASK
576117-832-802
001
None
 None
 - AFT higher than
1.50:
6200 FC / 13400
FH
-A F T l o w e r o r
equal to 1.50:
6700 FC / 10100
FH
If crack found
 Contact Airbus
 Before next flight
 None
 None
NOTE (*): Thresholds to be counted from embodiment of Repair Instruction R53810797.
Table 3, Config. 001 - Special Detailed Inspection of the Surrounding Area of the Rework for Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
All aircraft
 Do an HFEC
inspection of the
surrounding area
of the rework for
LH and/or RH
sides in
accordance with
TASK
576117-832-805
001
- AFT higher than
1.50:
7100 FC / 15300
FH
See NOTE (*)
-A F T l o w e r o r
equal to 1.50:
7650 FC / 11500
FH
See NOTE (*)
None
 None
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 22
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 41

@A300-600
SERVICE BULLETIN
Table 3, Config. 001 - Special Detailed Inspection of the Surrounding Area of the Rework for Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
If no crack found
 Repeat the HFEC
inspection of the
surrounding area
of the rework for
LH and/or RH
sides in
accordance with
TASK
576117-832-805
001
None
 None
 - AFT higher than
1.50:
4100 FC / 8900
FH
-A F T l o w e r o r
equal to 1.50:
4450 FC / 6600
FH
If crack found
 Contact Airbus
 Before next flight
 None
 None
NOTE (*): Thresholds to be counted from embodiment of Repair Instruction R53810798.
Table 4, Config. 001 - Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the Center
Wing Box for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
All aircraft
 Do a rototest
inspection of
fastener holes in
area of Rib 1
triform for LH
and/or RH sides in
accordance with
TASK
576117-832-808
001
- AFT higher than
1.50:
15200 FC /
32900 FH
See NOTE (*)
-A F T l o w e r o r
equal to 1.50:
16400 FC /
24600 FH
See NOTE (*)
None
 None
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 23
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 42

@A300-600
SERVICE BULLETIN
Table 4, Config. 001 - Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the Center
Wing Box for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
Ream up the
original hole to
next oversize
diameter and
install new
fastener in
accordance with
SUBTASK
576117-833-014
001 for LH side
and/or SUBTASK
576117-833-013
001 for RH side
AND
Before next flight
 None
 None
If no crack found
Repeat the
rototest inspection
of fastener holes
in area of Rib 1
triform for LH
and/or RH sides in
accordance with
TASK
576117-832-808
001
None
 None
 - AFT higher than
1.50:
10100 FC /
21900 FH
-A F T l o w e r o r
equal to 1.50:
10900 FC /
16400 FH
If crack found
 Contact Airbus
 Before next flight
 None
 None
NOTE (*): Thresholds to be counted from Service Bulletin No. A300-57-6053 embodiment.
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 24
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 43

@A300-600
SERVICE BULLETIN
Table 5, Config. 001 - Do a Rototest Inspection of Fastener Holes in the front spar Lower Flange area
in the Center Wing Box for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
All aircraft
 Do a rototest
inspection of
fastener holes in
the front spar
lower flange area
for crack for LH
and/or RH sides in
accordance with
TASK
576117-832-806
001
- AFT higher than
1.50:
22900 FC /
49600 FH
See NOTE (*)
-A F T l o w e r o r
equal to 1.50:
24800 FC /
37200 FH
See NOTE (*)
None
 None
Ream up the
original holes to
next oversize
diameter and
install new
fastener in
accordance with
SUBTASK
576117-833-012
001 for LH side
and/or SUBTASK
576117-833-011
001 for RH side
AND
Before next flight
 None
 None
If no crack found
Repeat the
rototest inspection
of fastener holes
in the front spar
lower flange area
for crack for LH
and/or RH sides in
accordance with
TASK
576117-832-806
001
None
 None
 - AFT higher than
1.50:
15300 FC /
33100 FH
-A F T l o w e r o r
equal to 1.50:
16500 FC /
24800 FH
If crack found
 Contact Airbus
 Before next flight
 None
 None
NOTE (*): Thresholds to be counted from Service Bulletin No. A300-57-6053 embodiment.
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 25
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 44

@A300-600
SERVICE BULLETIN
Table 6, Config. 001 - Do an Ultrasonic Inspection of Center Wing Box Lower Panel Area for LH and
RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
All aircraft
 Do an ultrasonic
inspection of
center wing box
lower panel area
for LH and/or RH
sides in
accordance with
TASK
576117-832-809
001
- AFT higher than
1.50:
21400 FC /
46400 FH
See NOTE (*)
-A F T l o w e r o r
equal to 1.50:
23200 FC /
34800 FH
See NOTE (*)
None
 None
If no crack found
 Repeat the
ultrasonic
inspection of
center wing box
lower panel area
for LH and/or RH
sides in
accordance with
TASK
576117-832-809
001
None
 None
 - AFT higher than
1.50:
6100 FC / 13300
FH
-A F T l o w e r o r
equal to 1.50:
6600 FC / 10000
FH
If crack found
 Contact Airbus
 Before next flight
 None
 None
NOTE (*): Thresholds to be counted from Service Bulletin No. A300-57-6053 embodiment.
Table 7, Config. 001 - Special Detailed Inspections of the Surrounding Area of the Repair for Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
All aircraft
 Do an HFEC
inspection of the
surrounding area
of the repair for
LH and/or RH
sides in
accordance with
TASK
576117-832-804
001
- AFT higher than
1.50:
6850 FC / 14800
FH
See NOTE (*)
-A F T l o w e r o r
equal to 1.50:
7400 FC / 11100
FH
See NOTE (*)
None
 None
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 26
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 45

@A300-600
SERVICE BULLETIN
Table 7, Config. 001 - Special Detailed Inspections of the Surrounding Area of the Repair for Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
If no crack found
 Repeat the HFEC
inspection of the
surrounding area
of the repair for
LH and/or RH
sides in
accordance with
TASK
576117-832-804
001
None
 None
 - AFT higher than
1.50:
2500 FC / 5500
FH
-A F T l o w e r o r
equal to 1.50:
2700 FC / 4100
FH
If crack found
 Contact Airbus
 Before next flight
 None
 None
NOTE (*): Thresholds to be counted from embodiment of Repair Instruction R53810799.
Table 8, Config. 001 - Special detailed inspection of Frame 40 lower outboard radius for cracks after
repair for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
All aircraft
 Do an HFEC
inspection of the
lower radius area
for LH and/or RH
sides in
accordance with
TASK
576117-832-802
001
- AFT higher than
1.50:
7600 FC / 16500
FH
See NOTE (*)
-A F T l o w e r o r
equal to 1.50:
8200 FC / 12300
FH
See NOTE (*)
None
 None
If no crack found
 Repeat the HFEC
inspection of the
lower radius for
LH and/or RH
sides in
accordance with
TASK
576117-832-802
001
None
 None
 - AFT higher than
1.50:
5400 FC / 11800
FH
-A F T l o w e r o r
equal to 1.50:
5900 FC / 8900
FH
If crack found
 Contact Airbus
 Before next flight
 None
 None
NOTE (*): Thresholds to be counted from accomplishment of Service Bulletin No. A300-57-6116.
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 27
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 46

@A300-600
SERVICE BULLETIN
**CONF 002
This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA) will be issued
to confirm this classification. It is anticipated that the AD will confirm the thresholds and
intervals given but reference should be made to the AD for confirmation of the mandated
accomplishment timescale.
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 28
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 47

@A300-600
SERVICE BULLETIN
Table 1, Config. 002 - Special Detailed Inspections of Frame 40 Lower Outboard Radius For Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
Do an HFEC
inspection of the
surrounding area
of the repair for
LH and/or RH
sides in
accordance with
TASK
576117-832-804
001
AND
Refer to table 2
Do a rototest
inspection of
fastener holes in
area of Rib 1
triform for LH
and/or RH sides in
accordance with
TASK
576117-832-808
001
AND
Refer to table 3
Do a rototest
inspection of
fastener holes in
front spar lower
flange area for LH
and/or RH sides in
accordance with
TASK
576117-832-806
001
AND
Refer to table 4
All aircraft
Do an ultrasonic
inspection of
center wing box
lower panel area
for LH and/or RH
sides in
accordance with
TASK
576117-832-809
001
Refer to table 5
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 29
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 48

@A300-600
SERVICE BULLETIN
Table 2, Config. 002 - Special Detailed Inspections of the Surrounding Area of the Repair for Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
All aircraft
 Do an HFEC
inspection of the
surrounding area
of the repair for
LH and/or RH
sides in
accordance with
TASK
576117-832-804
001
- AFT higher than
1.50:
6850 FC / 14800
FH
See NOTE (*)
-A F T l o w e r o r
equal to 1.50:
7400 FC / 11100
FH
See NOTE (*)
900 FC from this
Service Bulletin
issuance date with
a visual detailed
inspection to be
performed every
300 FC from this
Service Bulletin
issuance date
None
If no crack found
 Repeat the HFEC
inspection of the
surrounding area
of the repair for
LH and/or RH
sides in
accordance with
TASK
576117-832-804
001
None
 None
 - AFT higher than
1.50:
2500 FC / 5500
FH
-A F T l o w e r o r
equal to 1.50:
2700 FC / 4100
FH
If crack found
 Contact Airbus
 Before next flight
 None
 None
NOTE (*): Thresholds to be counted from last accomplishment of Service Bulletin A300-57-6052 figure
4 or embodiment of Repair Instruction R53810799.
Table 3, Config. 002 - Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the Center
Wing Box for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
All aircraft
 Do a rototest
inspection of
fastener holes in
area of Rib 1
triform for LH
and/or RH sides in
accordance with
TASK
576117-832-808
001
- AFT higher than
1.50:
15200 FC /
32900 FH
See NOTE (*)
-A F T l o w e r o r
equal to 1.50:
16400 FC /
24600 FH
See NOTE (*)
900 FC from this
Service Bulletin
issuance date
None
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 30
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 49

@A300-600
SERVICE BULLETIN
Table 3, Config. 002 - Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the Center
Wing Box for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
Ream up the
original hole to
next oversize
diameter and
install new
fastener in
accordance with
SUBTASK
576117-833-014
001 for LH side
and/or SUBTASK
576117-833-013
001 for RH side
AND
Before next flight
 None
 None
If no crack found
Repeat the
rototest inspection
of fastener holes
in area of Rib 1
triform for LH
and/or RH sides in
accordance with
TASK
576117-832-808
001
None
 None
 - AFT higher than
1.50:
10100 FC /
21900 FH
-A F T l o w e r o r
equal to 1.50:
10900 FC /
16400 FH
If crack found
 Contact Airbus
 Before next flight
 None
 None
NOTE (*): Threshold to be counted from Service Bulletin No. A300-57-6053 embodiment.
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 31
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 50

@A300-600
SERVICE BULLETIN
Table 4, Config. 002 - Do a Rototest Inspection of Fastener Holes in the front spar Lower Flange area
in the Center Wing Box for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
All aircraft
 Do a rototest
inspection of
fastener holes in
the front spar
lower flange area
for crack for LH
and/or RH sides in
accordance with
TASK
576117-832-806
001
- AFT higher than
1.50:
22900 FC /
49600 FH
See NOTE (*)
-A F T l o w e r o r
equal to 1.50:
24800 FC /
37200 FH
See NOTE (*)
900 FC from this
Service Bulletin
issuance date
None
Ream up the
original holes to
next oversize
diameter and
install new
fastener in
accordance with
SUBTASK
576117-833-012
001 for LH side
and/or SUBTASK
576117-833-011
001 for RH side
AND
Before next flight
 None
 None
If no crack found
Repeat the
rototest inspection
of fastener holes
in the front spar
lower flange area
for crack for LH
and/or RH sides in
accordance with
TASK
576117-832-806
001
None
 None
 - AFT higher than
1.50:
15300 FC /
33100 FH
-A F T l o w e r o r
equal to 1.50:
16500 FC /
24800 FH
If crack found
 Contact Airbus
 Before next flight
 None
 None
NOTE (*): Threshold to be counted from Service Bulletin No. A300-57-6053 embodiment.
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 32
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 51

@A300-600
SERVICE BULLETIN
Table 5, Config. 002 - Do an Ultrasonic Inspection of Center Wing Box Lower Panel Area for LH and
RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
All aircraft
 Do an ultrasonic
inspection of
center wing box
lower panel area
for LH and/or RH
sides in
accordance with
TASK
576117-832-809
001
- AFT higher than
1.50:
21400 FC /
46400 FH
See NOTE (*)
-A F T l o w e r o r
equal to 1.50:
23200 FC /
34800 FH
See NOTE (*)
900 FC from this
Service Bulletin
issuance date
None
If no crack found
 Repeat the
ultrasonic
inspection of
center wing box
lower panel area
for LH and/or RH
sides in
accordance with
TASK
576117-832-809
001
None
 None
 - AFT higher than
1.50:
6100 FC / 13300
FH
-A F T l o w e r o r
equal to 1.50:
6600 FC / 10000
FH
If crack found
 Contact Airbus
 Before next flight
 None
 None
NOTE (*): Threshold to be counted from Service Bulletin No. A300-57-6053 embodiment.
**CONF 003
This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA) will be issued
to confirm this classification. It is anticipated that the AD will confirm the thresholds and
intervals given but reference should be made to the AD for confirmation of the mandated
accomplishment timescale.
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 33
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 52

@A300-600
SERVICE BULLETIN
Table 1, Config. 003 - Special Detailed Inspections of Frame 40 Lower Outboard Radius For Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
Do an HFEC
inspection of the
surrounding area
of the rework for
LH and/or RH
sides in
accordance with
TASK
576117-832-805
001
AND
Refer to table 2
Do a rototest
inspection of
fastener holes in
area of Rib 1
triform for LH
and/or RH sides in
accordance with
TASK
576117-832-808
001
AND
Refer to table 3
Do a rototest
inspection of
fastener holes in
front spar lower
flange area for LH
and/or RH sides in
accordance with
TASK
576117-832-806
001
AND
Refer to table 4
All aircraft
Do an ultrasonic
inspection of
center wing box
lower panel area
for LH and/or RH
sides in
accordance with
TASK
576117-832-809
001
Refer to table 5
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 34
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 53

@A300-600
SERVICE BULLETIN
Table 2, Config. 003 - Special Detailed Inspection of the Surrounding Area of the Rework for Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
All aircraft
 Do an HFEC
inspection of the
surrounding area
of the rework for
LH and/or RH
sides in
accordance with
TASK
576117-832-805
001
- AFT higher than
1.50:
7100 FC / 15300
FH
See NOTE (*)
-A F T l o w e r o r
equal to 1.50:
7650 FC / 11500
FH
See NOTE (*)
900 FC from this
Service Bulletin
issuance date with
a visual detailed
inspection to be
performed every
300 FC from this
Service Bulletin
issuance date
None
If no crack found
 Repeat the HFEC
inspection of the
surrounding area
of the rework for
LH and/or RH
sides in
accordance with
TASK
576117-832-805
001
None
 None
 - AFT higher than
1.50:
4100 FC / 8900
FH
-A F T l o w e r o r
equal to 1.50:
4450 FC / 6600
FH
If crack found
 Contact Airbus
 Before next flight
 None
 None
NOTE (*): Thresholds to be counted from embodiment of Repair Instruction R53810798.
Table 3, Config. 003 - Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the Center
Wing Box for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
All aircraft
 Do a rototest
inspection of
fastener holes in
area of Rib 1
triform for LH
and/or RH sides in
accordance with
TASK
576117-832-808
001
- AFT higher than
1.50:
15200 FC /
32900 FH
See NOTE (*)
-A F T l o w e r o r
equal to 1.50:
16400 FC /
24600 FH
See NOTE (*)
900 FC from this
Service Bulletin
issuance date
None
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 35
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 54

@A300-600
SERVICE BULLETIN
Table 3, Config. 003 - Rototest Inspection of Fastener Hole in Area of Rib 1 Triform in the Center
Wing Box for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
Ream up the
original hole to the
next oversize
diameter and
install new
fastener in
accordance with
SUBTASK
576117-833-014
001 for LH side
and/or SUBTASK
576117-833-013
001 for RH side
AND
Before next flight
 None
 None
If no crack found
Repeat the
rototest inspection
of fastener holes
in area of Rib 1
triform for LH
and/or RH sides in
accordance with
TASK
576117-832-808
001
None
 None
 - AFT higher than
1.50:
10100 FC /
21900 FH
-A F T l o w e r o r
equal to 1.50:
10900 FC /
16400 FH
If crack found
 Contact Airbus
 Before next flight
 None
 None
NOTE (*): Threshold to be counted from Service Bulletin No. A300-57-6053 embodiment.
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 36
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 55

@A300-600
SERVICE BULLETIN
Table 4, Config. 003 - Do a Rototest Inspection of Fastener Holes in the front spar Lower Flange area
in the Center Wing Box for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
All aircraft
 Do a rototest
inspection of
fastener holes in
the front spar
lower flange area
for crack for LH
and/or RH sides in
accordance with
TASK
576117-832-806
001
- AFT higher than
1.50:
22900 FC /
49600 FH
See NOTE (*)
-A F T l o w e r o r
equal to 1.50:
24800 FC /
37200 FH
See NOTE (*)
900 FC from this
Service Bulletin
issuance date
None
Ream up the
original holes to
next oversize
diameter and
install new
fastener in
accordance with
SUBTASK
576117-833-012
001 for LH side
and/or SUBTASK
576117-833-011
001 for RH side
AND
Before next flight
 None
 None
If no crack found
Repeat the
rototest inspection
of fastener holes
in the front spar
lower flange area
for crack for LH
and/or RH sides in
accordance with
TASK
576117-832-806
001
None
 None
 - AFT higher than
1.50:
15300 FC /
33100 FH
-A F T l o w e r o r
equal to 1.50:
16500 FC /
24800 FH
If crack found
 Contact Airbus
 Before next flight
 None
 None
NOTE (*): Threshold to be counted from Service Bulletin No. A300-57-6053 embodiment.
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 37
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 56

@A300-600
SERVICE BULLETIN
Table 5, Config. 003 - Do an Ultrasonic Inspection of Center Wing Box Lower Panel Area for LH and
RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
All aircraft
 Do an ultrasonic
inspection of
center wing box
lower panel area
for LH and/or RH
sides in
accordance with
TASK
576117-832-809
001
- AFT higher than
1.50:
21400 FC /
46400 FH
See NOTE (*)
-A F T l o w e r o r
equal to 1.50:
23200 FC /
34800 FH
See NOTE (*)
900 FC from this
Service Bulletin
issuance date
None
If no crack found
 Repeat the
ultrasonic
inspection of
center wing box
lower panel area
for LH and/or RH
sides in
accordance with
TASK
576117-832-809
001
None
 None
 - AFT higher than
1.50:
6100 FC / 13300
FH
-A F T l o w e r o r
equal to 1.50:
6600 FC / 10000
FH
If crack found
 Contact Airbus
 Before next flight
 None
 None
NOTE (*): Threshold to be counted from Service Bulletin No. A300-57-6053 embodiment.
**CONF 004
This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA) will be issued
to confirm this classification. It is anticipated that the AD will confirm the thresholds and
intervals given but reference should be made to the AD for confirmation of the mandated
accomplishment timescale.
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 38
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 57

@A300-600
SERVICE BULLETIN
Table 1, Config. 004 - Special Detailed Inspections of Frame 40 Lower Outboard Radius For Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
Do a special
detailed
inspections of
Frame 40 lower
outboard radius for
cracks for LH and
RH sides in
accordance with
TASK
576117-832-801
001
AND
- AFT (Average
Flight Time)
higher than 1.50:
1400 FC / 3000
FH
See NOTE (*)
-A F T l o w e r o r
equal to 1.50:
1500 FC / 2250
FH
See NOTE (*)
900 FC from this
Service Bulletin
issuance date
without exceeding
previous interval of
Service Bulletin No.
A300-57-6052 with
a visual detailed
inspection to be
performed every
300 FC from this
Service Bulletin
issuance date
None
Do a rototest
inspection of
fastener holes in
area of Rib 1
triform for LH
and/or RH sides in
accordance with
TASK
576117-832-808
001
AND
Refer to table 4
Do a rototest
inspection of
fastener holes in
front spar lower
flange area for LH
and/or RH sides in
accordance with
TASK
576117-832-806
001
AND
Refer to table 5
All aircraft
Do an ultrasonic
inspection of
center wing box
lower panel area
for LH and/or RH
sides in
accordance with
TASK
576117-832-809
001
Refer to table 6
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 39
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 58

@A300-600
SERVICE BULLETIN
Table 1, Config. 004 - Special Detailed Inspections of Frame 40 Lower Outboard Radius For Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
Ream up the
original hole to
next oversize
diameter and
install the new
fastener in
accordance with
SUBTASK
576117-833-001
001 for LH side
and/or SUBTASK
576117-833-008
001 for RH side
AND
Before next flight
 None
 None
Repeat the special
detailed
inspections of
Frame 40 lower
outboard radius for
cracks for LH
and/or RH sides in
accordance with
TASK
576117-832-801
001
None
 None
 - AFT higher than
1.50:
1400 FC / 3000
FH
-A F T l o w e r o r
equal to 1.50:
1500 FC / 2250
FH
OR
Apply Service
Bulletin No.
A300-57-6116
AND
Before next flight
 None
 None
If no crack found
Do an HFEC
inspection of the
lower radius area
for LH and/or RH
sides in
accordance with
TASK
576117-832-802
001
Refer to table 8
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 40
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 59

@A300-600
SERVICE BULLETIN
Table 1, Config. 004 - Special Detailed Inspections of Frame 40 Lower Outboard Radius For Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
If crack found
limited to the
existing spotfacing
Do a spotfacing in
the hole of Dia. 25
mm (0.984 in) in
accordance with
SUBTASK
576117-833-002
001 for LH side
and/or SUBTASK
576117-833-007
001 for RH side
Before next flight
 None
 None
Apply Repair
Instruction
R53810797 in
accordance with
SUBTASK
576117-833-003
001 for LH side
and/or SUBTASK
576117-833-010
001 for RH side
AND
Before next flight
 None
 None
Do an HFEC
inspection of the
lower radius area
for LH and/or RH
sides in
accordance with
TASK
576117-832-802
001
AND
Refer to table 2
If crack removed
after the spotfacing
in the hole of Dia.
25 mm (0.984 in)
Do a rototest
inspection of
fastener holes in
area of Rib 1
triform for LH
and/or RH sides in
accordance with
TASK
576117-832-808
001
AND
Refer to table 4
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 41
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 60

@A300-600
SERVICE BULLETIN
Table 1, Config. 004 - Special Detailed Inspections of Frame 40 Lower Outboard Radius For Cracks
for LH and RH Sides
Compliance time (Whichever occurs
later)
Condition
 Action
Threshold
(whichever occurs
first)
Grace period
(whichever occurs
first)
Repetitive interval
(whichever occurs
first)
Do a rototest
inspection of
fastener holes in
front spar lower
flange area for LH
and/or RH sides in
accordance with
TASK
576117-832-806
001
AND
Refer to table 5
If crack removed
after the spotfacing
in the hole of Dia.
25 mm (0.984 in)
Do an ultrasonic
inspection of
center wing box
lower panel area
for LH and/or RH
sides in
accordance with
TASK
576117-832-809
001
Refer to table 6
DATE: May 28/15 SERVICE BULLETIN No.: A300-57-6117
REVISION No.: 00 - May 28/15 Page: 42
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

The text continues at https://openairdocs.org/service-documents/airbus/a300-57-6117/file/6f2d2bec95ce.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
