# Airbus Service Bulletin A300-57-6118

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 01 ("SB A300-57-6118 R1"), 45 pages: PDF https://openairdocs.org/files/sha256/1e/2f/1e2f83175c8a853a1882d1c2268fbea52116371fcdaafad389bd1de5c83486d2; text https://openairdocs.org/service-documents/airbus/a300-57-6118/file/1e2f83175c8a.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2017-0710; AD 2017-23-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- A300-57-6118R2 ("A300-57-6118R2"), 57 pages: PDF https://openairdocs.org/files/sha256/ca/7f/ca7fb5dd7dac7d3672c00212dcff4e6a2be3f8361e1ef55d4adf58d11d9992cf; text https://openairdocs.org/service-documents/airbus/a300-57-6118/file/ca7fb5dd7dac.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2025-0754, the docket of AD 2025-23-02. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A300-57-6118
- Latest revision known: A300-57-6118, Revision 01, dated January 31, 2017 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/a300-57-6118

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2017-23-04](https://openairdocs.org/ad/2017-23-04.md), effective Dec 20, 2017: Revision 01

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a300-57-6118/proposed.md).

## Text (45 pages)

Revision 01, the newest copy. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2017-0710; AD 2017-23-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 57
TITLE: WING - STRUCTURE - STRINGER JOINT AT RIB 18 (OVERSIZE
ATTACHMENT HOLES)
MODIFICATION No.: 13611H5752
This page transmits Revision No.01 of Service Bulletin No.A300-57-6118
ADDITIONAL WORK
**CONF ALL
No additional work is required by this revision for aircraft modified by any previous issue.
REASON
Revision 01 issued to: update the Service Bulletin Accomplishment Timescales.
CHANGES
The main changes of this revision are:
- Update the Accomplishment Timescale
- Update the Service Bulletin effectivity
- Procurement address corrected
- Weight and Balance statement amended
- NOTES added to the ACCOMPLISH MENT INSTRUCTIONS paragraph.
SUMMARY
REASON/DESCRIPTION/OPERATIONAL
CONSEQUENCES
REASON UPDATED
 R
MATERIAL PRICE INFORMATION
 MATERIAL PRICE INFORMATION TABLE
UPDATED
R
EFFECTIVITY
 OPERATOR LIST UPDATED
 R
REFERENCES / REPERCUSSIONS
 REFERENCES/REPERCUSSIONS TABLE
UPDATED
R
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
APPENDICES
 APPENDICES UPDATED
 R
PLANNING INFORMATION
EFFECTIVITY
 EFFECTIVITY RELATED INFORMATION
UPDATED
R
Configuration definition
CONF 001
 CONFIGURATION DEFINITION UPDATED
 R
REASON
Operational/Maintenance
Consequences
OPERATIONAL/MAINTENANCE CONSEQUENCES
UPDATED
R
COMPLIANCE
Accomplishment Timescale
 ACCOMPLISHMENT TIMESCALE UPDATED
 R
MANPOWER
 MANPOWER UPDATED
 R
WEIGHT AND BALANCE
 Minor editorial or document structure change
 R
REFERENCES
 REFERENCED DOCUMENTATION UPDATED
 R
MATERIAL INFORMATION
MATERIAL - PRICE AND AVAILABILITY
Procurement Addresses
 PROCUREMENT ADDRESSES UPDATED
 R
Price and Availability
 PRICE AND AVAILABILITY UPDATED
MATERIAL PRICE UPDATED
R
ACCOMPLISHMENT INSTRUCTIONS
TASK 576118- 831-895-001-Modification
 TASK SOLUTION UPDATED
NOTE UPDATED
CAUTION UPDATED
R
Subtask 576118-910-401-001
 SUBTASK SOLUTION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCES UPDATED
R
Appendix 01 - Manpower Gantt Chart
Fig. A-UAAAA
 FIGURE SOLUTION UPDATED
 R
FILING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete document.
Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
HISTORY OF PREVIOUS REVISIONS
No previous revision
REVISION SEQUENCE
ORIGINAL: Jun 30/15
REVISION No. : 01 - Jan 31/17
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A300-600
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 57
TITLE: WING - STRUCTURE - STRINGER JOINT AT RIB 18 (OVERSIZE
ATTACHMENT HOLES)
**CONF ALL
MODIFICATIONS
MODIFICATION CLASSIFICATION
MAJOR
 13611H5752
MINOR
 None
NOTE
: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting the
airworthiness of the product. All other changes are major changes.
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
Following fatigue analysis on the A300-600, the Top Skin Stringer Joints at Rib 18 have been identified
as an area that is susceptible to Widespread Fatigue Damage (WFD).
As a result of the FAA Part 26 rule change, all wing structural items deemed potentially susceptible to
WFD have been assessed. The top stringer joints at Rib 18 have been highlighted as an area of
uniform stress distribution, indicating that cracks may develop in adjacent stringers at the same time
which is known as Multi Element Damage (MED).
The stringer joint consists of 3 main load transferring parts: an overlapping flange, two straps attached
through the stringer web and a strap on the top flange. All the components of the joint are attached with
fasteners. The fastener holes were the subject of a MED WFD analysis which showed that cracking
could occur from a number of the holes in the joint on Stringers 11, 12, 13, 14, 15, 16, 17 and 18.
This modification consists of a 1st oversize of the critical holes on Stringers 11, 12, 13, 14, 15, 16, 17
and 18. The crown strap does not need to be modified but will be subjected to a detailed inspection
(DET) during embodiment of this Service Bulletin.
This modification will satisfy the requirements of the FAA Part 26 rule (14 Code of Federal Regulations
(CFR) 26 Subpart C) requiring WFD justification of susceptible items.
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A300-600
SERVICE BULLETIN
SUMMARY
This modification will both re-life via oversizing and inspect via non-destructive test a defined number of
stringer joint fastener holes at Rib 18. This modification will delay the onset of cracking at the stringer
joint providing it is completed at the recommended time and will delay the requirement for subsequent
inspection.
This Service Bulletin is based on the aircraft configuration as known by AIRBUS (first aircraft delivery
configuration and modified by the reported incorporation of AIRBUS Service Bulletins).
Prior to Service Bulletin embodiment, specific attention must be paid to structural damage which may
exist and to repairs which were performed on the aircraft because they may be affected when this
Service Bulletin is applied. It must be verified that all allowable damage limits and repairs performed
(both in accordance with the SRM and outside of the SRM) are still applicable and effective after
embodiment of this Service Bulletin.
There may be additional or modified maintenance requirements, such as temporary limits or additional
inspections that apply with respect to the Service Bulletin configuration.
This Service Bulletin is based on the aircraft configuration as known by AIRBUS (first aircraft delivery
configuration and modified by the reported incorporation of AIRBUS Service Bulletins).
This Modification Service Bulletin affects the airworthiness limitations of Airworthiness Limitation Section
(ALS) Part 2 which shall be introduced within the A/C maintenance program under the operator
responsibility. Please download the relevant ALS Variation on Airbus World.
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 ETOPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 NO
DEFUEL/VENTILATION
 YES
 PRE-ENTRY CHECKLIST
 YES
NOTE
 (1)
: Service Bulletin must be accomplished.
MATERIAL PRICE INFORMATION
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Kit 576118B01R00
 2
 9,540.00
 Bolts and Nuts
EFFECTIVITY
This Service Bulletin is applicable to this (these) operator(s) :
14S
 AAW
 ABR AHK BCS FDX IRA IRM KAC MNB MRJ MSR PXA
QSM
 SOP
 SUD TAR THA URS UTP
CONCURRENT REQUIREMENTS
None
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A300-600
SERVICE BULLETIN
SUMMARY
REFERENCES / REPERCUSSIONS
TFU
 None
OEB
 None
AOT
 None
SIL
 None
ISI
 None
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 None
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 NO
HARD
 NO
SOFT
 NO
OBRM
 NO
MANPOWER
Task 576118-831-895-001: Modification
TOTAL MANHOURS
 37.00
ELAPSED TIME (HOURS)
 11.50
APPENDICES
Appendix 01 - Manpower Gantt Chart
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A300-600
SERVICE BULLETIN
SUMMARY
**CONF ALL
LH SHOWN
RH SIMILAR
A
FRONT SPAR
REAR SPAR
CENTER SPAR
Z500
Z600
RIB18
A
A
STRINGERS 11
THRU 18 AT RIB 18
D_SB_576118_7_SAAA_01_00
Figure A-USAAA - Sheet 01
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A300-600
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 57
TITLE: WING - STRUCTURE - STRINGER JOINT AT RIB 18 (OVERSIZE
ATTACHMENT HOLES)
MODIFICATION No.: 13611H5752
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
(1) Models
B4-603 B4-605R B4-622 B4-622R C4-605R/FC4-620 F4-605R
(2) Effectivity by MSN
0344 0358 0361 0365 0380 0388 0401 0405 0408 0411 0414 0417 0477 0479 0505
0521 0525 0530
 0532 0536 0543 0546 0553 0555 0557-0559 0561 0563 0572 0575
0579 0581 0584 0602-0603 0607-0608 0611 0613 0617-0618 0621 0623 0625-0626
0629-0630 0632-0633 0637 0641 0643 0657 0659 0664 0666 0668 0670 0673 0677
0679 0683 0688 0694 0696 0699 0701 0703 0707 0709 0711 0713 0715 0717 0719
0721-0730 0732-0746
 0748-0750
 0752-0764 0766 0768-0775 0777-0794 0797
0799-0804 0836-0838
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A300-600
SERVICE BULLETIN
OPERATOR
 MSN
14S
 0787
AAW
 0788
ABR
 0557
 0677 0717
 0722
AHK
 0683 0770
BCS
 0602 0617 0621 0637 0641 0670 0679 0703 0711 0724 0729 0730
0737 0740 0743 0753 0783 0797 0836 0837
FDX
 0358 0361 0365 0388 0417 0477 0479 0530 0536 0543 0555 0559
0572 0575 0579 0581 0611 0613 0625 0630 0633 0657 0659 0664
0668 0688 0709 0713 0715 0726 0728 0735 0736 0738 0742 0745
0748 0752 0757 0759 0760 0761 0766 0768 0769 0771 0772 0774
0777 0778 0779 0780 0781 0789 0790 0791 0792 0793 0794 0799
0800 0801 0802 0803 0804
IRA
 0632 0696 0723 0727
IRM
 0380 0401 0405 0408 0411 0414 0546 0553 0608 0618 0623 0701
0773 0838
KAC
 0344 0673 0694 0699 0719 0721
MNB
 0521 0525 0734 0739 0755 0756 0758
MRJ
 0750 0762
MSR
 0561 0607
PXA
 0626
 0643
QSM
 0584
 0603
 0744
 0749
 0764
SOP
 0532
SUD
 0666 0775
TAR
 0505 0558 0563
THA
 0629 0782 0784 0785 0786
URS
 0733
UTP
 0707 0725 0732 0741 0746 0754 0763
(4) Configuration by MSN
MSN
 CONFIGURATION
0344 0358 0361 0365 0380 0388 0401 0405 0408 0411 0414
0417 0477 0479 0505 0521 0525 0530 0532 0536 0543 0546
0553 0555 0557 0558 0559 0561 0563 0572 0575 0579 0581
0584 0602 0603 0607 0608 0611 0613 0617 0618 0621 0623
0625 0626 0629 0630 0632 0633 0637 0641 0643 0657 0659
0664 0666 0668 0670 0673 0677 0679 0683 0688 0694 0696
0699 0701 0703 0707 0709 0711 0713 0715 0717 0719 0721
0722 0723 0724 0725 0726 0727 0728 0729 0730 0732 0733
0734 0735 0736 0737 0738 0739 0740 0741 0742 0743 0744
0745 0746 0748 0749 0750 0752 0753 0754 0755 0756 0757
0758 0759 0760 0761 0762 0763 0764 0766 0768 0769 0770
0771 0772 0773 0774 0775 0777 0778 0779 0780 0781 0782
0783 0784 0785 0786 0787 0788 0789 0790 0791 0792 0793
0794 0797 0799 0800 0801 0802 0803 0804 0836 0837 0838
001
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A300-600
SERVICE BULLETIN
(5) Configuration definition
**CONF 001
Config. 001 is valid for all the aircraft given in the effectivity of this Service Bulletin as a
standard configuration.
(6) Material Effectivity
MATERIAL
 QTY PER A/C
 SEE NOTES
Kit 576118B01R00
 2
 (1)
Consumable CMLB01
 1
NOTE
 (1)
: To accomplish this Service Bulletin on one aircraft you will require two of
Kit 576118B01R00.
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
Following fatigue analysis on the A300-600, the Top Skin Stringer Joints at Rib 18 have
been identified as an area that is susceptible to Widespread Fatigue Damage (WFD).
As a result of the FAA Part 26 rule change, all wing structural items deemed potentially
susceptible to WFD have been assessed. The top stringer joints at Rib 18 have been
highlighted as an area of uniform stress distribution, indicating that cracks may develop
in adjacent stringers at the same time which is known as Multi Element Damage (MED).
The stringer joint consists of 3 main load transferring parts: an overlapping flange,
two straps attached through the stringer web and a strap on the top flange. All the
components of the joint are attached with fasteners. The fastener holes were the subject
of a MED WFD analysis which showed that cracking could occur from a number of the
holes in the joint on Stringers 11, 12, 13, 14, 15, 16, 17 and 18.
This modification consists of a 1st oversize of the critical holes on Stringers 11, 12, 13,
14, 15, 16, 17 and 18. The crown strap does not need to be modified but will be
subjected to a detailed inspection (DET) during embodiment of this Service Bulletin.
(2) Objective/Action
This modification will satisfy the requirements of the FAA Part 26 rule (14 Code of
Federal Regulations (CFR) 26 Subpart C) requiring WFD justification of susceptible
items.
(3) Advantages
This modification will both re-life via oversizing and inspect via non-destructive test a
defined number of stringer joint fastener holes at Rib 18. This modification will delay the
onset of cracking at the stringer joint providing it is completed at the recommended time
and will delay the requirement for subsequent inspection.
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A300-600
SERVICE BULLETIN
(4) Operational/Maintenance Consequences
This Service Bulletin is based on the aircraft configuration as known by AIRBUS (first
aircraft delivery configuration and modified by the reported incorporation of AIRBUS
Service Bulletins).
Prior to Service Bulletin embodiment, specific attention must be paid to structural
damage which may exist and to repairs which were performed on the aircraft because
they may be affected when this Service Bulletin is applied. It must be verified that all
allowable damage limits and repairs performed (both in accordance with the SRM and
outside of the SRM) are still applicable and effective after embodiment of this Service
Bulletin.
There may be additional or modified maintenance requirements, such as temporary
limits or additional inspections that apply with respect to the Service Bulletin
configuration.
This Service Bulletin is based on the aircraft configuration as known by AIRBUS (first
aircraft delivery configuration and modified by the reported incorporation of AIRBUS
Service Bulletins).
This Modification Service Bulletin affects the airworthiness limitations of Airworthiness
Limitation Section (ALS) Part 2 which shall be introduced within the A/C maintenance
program under the operator responsibility. Please download the relevant ALS Variation
on Airbus World.
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
Task 576118-831-895-001: Modification
(1) Do a Detailed Visual Inspection of the Top Wing Skin at Rib 18 LH Wing
(2) Do a Detailed Visual Inspection of the Stringer Joint (including Attached Flange,
Stringer Web, Side Strap, Free Flange and Crown Strap) at Rib 18 LH Wing
(3) Modify the Stringer Joint Couplings at Rib 18 LH Wing
(4) Do a Detailed Visual Inspection of the Top Wing Skin at Rib 18 RH Wing
(5) Do a Detailed Visual Inspection of the Stringer Joint (including Attached Flange,
Stringer Web, Side Strap, Free Flange and Crown Strap) at Rib 18 RH Wing
(6) Modify the Stringer Joint Couplings at Rib 18 RH Wing
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A300-600
SERVICE BULLETIN
(2) Accomplishment Timescale
Table 1, Config. 001 - Modify the Stringer Joint Couplings at Rib 18 LH and RH Wing
Windows of Embodiment (WOE)
Lower Bound
(Whichever occurs first
from first flight)
Upper Bound
(Whichever occurs
first from first flight)
Grace Period (Whichever occurs
first from the issuance of this
Service Bulletin)
Aircraft
Flight
Cycles
(FC)
Flight
Hours (FH)
Flight
Cycles
(FC)
Flight
Hours
(FH)
Flight
Cycles
(FC)
Flight
Hours
(FH)
Months
A300B4-600(R)
 30900 FC
 66700 FH
 32500 FC
 70300 FH
 700 FC
 1500 FH
 12
A300B4-600(R)
(AFT<1.5FH/FC)
28700 FC
 43000 FH
 35100 FC
 52600 FH
 700 FC
 1000 FH
 12
A300C4/F4-605R
pre mod 12699
28600 FC
 61700 FH
 35000 FC
 75700 FH
 Not
Required
Not
Required
Not
Required
A300C4-600(R)
/ A300F4-605R
pre mod 12699
(AFT<1.5FH/FC)
34400 FC
 51600 FH
 37800 FC
 56700 FH
 Not
Required
Not
Required
Not
Required
NOTE
: This Service Bulletin must be performed between the lower bound and
the upper bound values.
This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA) will be issued
to confirm this classification. It is anticipated that the AD will confirm the thresholds
given but reference should be made to the AD for confirmation of the mandated
accomplishment timescale.
NOTE
: A300F4-605R post mod. 12669, and models A300F4-622R do not
require modification as the WOE is beyond the aircraft limit of Validity.
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA.21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 5
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A300-600
SERVICE BULLETIN
Task 576118-831-895-001: Modification
Get Access
 1.50
On Aircraft
Do a Detailed Visual Inspection of the Top Wing Skin
at Rib 18 LH Wing
0.50
Do a Detailed Visual Inspection of the Stringer Joint
(including Attached Flange, Stringer Web, Side Strap,
Free Flange and Crown Strap) at Rib 18 LH Wing
0.50
Modify the Stringer Joint Couplings at Rib 18 LH Wing
 16.00
Do a Detailed Visual Inspection of the Top Wing Skin
at Rib 18 RH Wing
0.50
Do a Detailed Visual Inspection of the Stringer Joint
(including Attached Flange, Stringer Web, Side Strap,
Free Flange and Crown Strap) at Rib 18 RH Wing
0.50
Modify the Stringer Joint Couplings at Rib 18 RH Wing
 16.00
Close-Up
 1.50
TOTAL MANHOURS
 37.00
ELAPSED TIME (HOURS)
 11.50
NOTE
: For an explanation of the manhours and elapsed time, refer to the Gantt
Chart, Fig. A-UAAAA
 given in Appendix 01 - Manpower Gantt Chart
 .
H. WEIGHT AND BALANCE
The weight and balance estimates given in this Service Bulletin are based on the
Manufacturer’s Empty Weight (MEW) and do not include operator’s items. For the definition of
MEW and operator’s items, refer to the Weight and Balance Manual (WBM)
 .
Manufacturers Empty Weight +0.07 KG (+0.1543 LB)
Effect on Balance +2.284 KGM (+16.520 LB.FT )
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
Aircraft Maintenance Manual (AMM)
 20-21-12
 24-00-00 28-10-00
28-11-22 28-25-00
Consumable Material List (CML)
Elec. Std. Practices Manual (ESPM)
 20-55-00
Non Destructive Test Manual (NTM)
 51-70-00 57-25-38 57-29-02
Standards Manual (SM)
Structural Repair Manual (SRM)
 51-23-10 51-24-00 51-40-00
51-40-20
 51-40-40
 51-40-44
51-49-00 51-75-10
Weight and Balance Manual (WBM)
K. PUBLICATION AFFECTED
None
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 6
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A300-600
SERVICE BULLETIN
L. INTERCHANGEABILITY/MIXABILITY
Not Applicable
M. SPARES
None
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 7
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A300-600
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 8
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A300-600
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
Customers with aircraft shown in the effectivity of this Service Bulletin should send a
purchase order to AIRBUS. Quote the number of this Service Bulletin. The address is:
Kit 576118B01R00
 AIRBUS Material, Logistics and Suppliers
ATP 11 B
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
For ordering by internet:
http://spares.airbus.com
For ordering by E-mail: airbus.kit@airbus.com
Telephone Hotline: +49 (0) 40 743 51775
(2) Price and Availability
Kit 576118B01R00
Cost
 4,770.00
 USD
Availability
 90 calendar days from receipt of order
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning schedule
with your order so that we can try to comply with your requirements.
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained through the
AirbusSpares portal or through a request for quotation to airbus.kit@airbus.com.
B. INDUSTRY SUPPORT INFORMATION
AIRBUS will not provide industry support for accomplishment of this Service Bulletin.
C. LIST OF COMPONENTS
Kit 576118B01R00
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
1
 NSA5479BV4-8X
 24
 BOLT
2
 NSA5479BV4-11X
 16
 BOLT
3
 NSA5477VHK4-5
 16
 BOLT
4
 NSA5477VHK4-10
 32
 BOLT
5
 NSA5477VHK4-9
 16
 BOLT
6
 NSA5472-4K7
 104
 NUT
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 9
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A300-600
SERVICE BULLETIN
NOTE
: If you find part numbers of hardware components in the related kit(s) which
you cannot identify in the LIST OF COMPONENTS of this Service Bulletin,
refer to Standards Manual (SM). The SM will give you the correct part number
to part number relationship.
NOTE
: To accomplish this Service Bulletin on one aircraft you will require two of Kit
576118B01R00.
D. LIST OF MATERIALS - OPERATOR SUPPLIED
(1) Consumable Materials
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO CML
MAT. No.
QTY PER A/C
 SEE
NOTES
Polysulfide Sealant - Fuel Tank
Fillet
06ABB1
 As required
(2) Components
None
(3) Equipment
None
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
F. TOOLING
None
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 10
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A300-600
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 576118-831-895-001 - Modification
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
WARNING
: THIS PROCEDURE USES A FUEL SYSTEM ITEM THAT IS IN A CATEGORY
KNOWN AS A CRITICAL DESIGN CONFIGURATION CONTROL LIMITATION
(CDCCL) CDCCL IDENTIFIES AN ITEM THAT CAN BE THE SOURCE OF A
POSSIBLE FUEL TANK IGNITION. YOU MUST KEEP ALL CDCCL ITEMS IN
THE APPROVED CONFIGURATION. DAMAGE, WEAR OR CHANGES TO A
CDCCL ITEM CAN CAUSE A POSSIBLE FUEL TANK EXPLOSION.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC. AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. Other paragraphs are recommended and may be deviated
from, done as part of other actions or done with accepted methods different from
those given in the Service Bulletin, as long as the RC paragraphs can be done and
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 11
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A300-600
SERVICE BULLETIN
the aircraft can be put back into a serviceable condition.
NOTE
: Discarded parts must be managed at the operator’s discretion.
NOTE
: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions contained herein, contact AIRBUS for further
instructions and approval.
Task Associated Data
Zone
500 550 600 650
Access
Door
 550CB 650CB
Panel
 550BB 650BB
Manpower
TOTAL MANHOURS
 37.00
ELAPSED TIME (HOURS)
 11.50
A. GENERAL
(1) Subtask 576118-910-401-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 20-21-12, Page Block 001
Consumable Material List (CML)
Structural Repair Manual (SRM)
 51-23-10
51-24-00
51-40-00
51-40-20
51-40-40
51-40-44
51-49-00
51-75-10
(a) For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
Consumable Materials List (CML).
(b) To Torque tighten the standard threaded fasteners, Refer to AMM 20-21-12, Page
Block 001
.
(c) Remove and install fasteners in metallic structure in accordance with SRM
51-40-20
.
(d) Apply sealant in accordance with SRM 51-24-00.
(e) Renew protective finish in accordance with SRM 51-75-10
 .
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 12
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A300-600
SERVICE BULLETIN
(f) Obtain fastener hole diameters and drill data in accordance with SRM 51-40-40
 .
(g) If alternative and substitute fasteners have to be used, you must make sure that the
associated nut/collar are compatible in accordance with SRM 51-40-00 ’Mating Part’
column.
(h) If the length of any fastener specified in this Service Bulletin does not meet
installation standards given in SRM Chapter 51, then a fastener of the same
specification, or an approved substitute, with a length which meets the installation
standards given in SRM Chapter 51 may be used. In addition, washers may be
installed for fastener grip length in accordance with SRM Chapter 51.
(2) Subtask 576118-839-401-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
B. PREPARATION
(1) Subtask 576118-941-401-001 - Job Set-up
Work Zones and Access Panels
Zone
 Access/Work location
550
 Access
 Door 550CB
650
 Access
 Door 650CB
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 24-00-00, Page Block 301
28-10-00, Page Block 301
28-25-00, Page Block 301
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
- Aircraft electrical network de-energized
- Hydraulic system s depressurized
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 13
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A300-600
SERVICE BULLETIN
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position.
(a) Make sure that the aircraft is electrically grounded, refer to AMM 24-00-00, Page
Block 301.
(b) Defuel all of the aircraft fuel tanks, refer to AMM 28-25-00, Page Block 301.
(c) Prepare the aircraft as specified in AMM Task ’STORAGE - SERVICING (Fuel
Tank Draining, Venting and Entry)’, refer to AMM 28-10-00, Page Block 301.
1
 Before you go into a fuel tank you must complete the Pre-Entry Checklist,
refer to AMM 28-10-00, Page Block 301.
(2) Subtask 576118-010-401-001 - Remove/Open for Access
Work Zones and Access Panels
Zone
 Access/Work location
550
 Access
 Panel 550BB
650
 Access
 Panel 650BB
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 28-11-22, Page Block 401
(a) Put platforms in position to get access to the wing tanks outer - Zones 550 LH (650
RH).
(b) Remove the manhole covers for the wing tanks outer 550BB LH and (650BB RH),
refer to AMM 28-11-22, Page Block 401.
C. PROCEDURE
(1) Subtask 576118-220-401-001 - Do a Detailed Visual Inspection of the Top Wing
Skin at Rib 18 LH Wing
Work Zones and Access Panels
Zone
 Access/Work location
500
 Work location
 Rib 18
from Stringer 11 to Stringer 18
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 14
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A300-600
SERVICE BULLETIN
References
Non Destructive Test Manual (NTM)
 51-70-00
Fig. A-UBBAA
Detailed Visual Inspection of the Top
Wing Skin and Stringer Joint at Rib 18
Sheet 01
Sheet 02
(a) As shown in Fig. A-UBBAA Sheet 01
 and Fig. A-UBBAA Sheet 02
 , inspect the top
wing skin:
1
 At Rib 18, STGR 11 to STGR 18, do a Detailed Visual Inspection (DET) of the
top wing skin external surface in accordance with NTM 51-70-00.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
(2) Subtask 576118-220-402-001 - Do a Detailed Visual Inspection of the Stringer Joint
(including Attached Fla nge, Stringer Web, Side Strap, Free Flange and Crown
Strap) at Rib 18 LH Wing
Work Zones and Access Panels
Zone
 Access/Work location
500
 Work location
 Rib 18
from Stringer 11 to Stringer 18
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Non Destructive Test Manual (NTM)
 51-70-00
Fig. A-UBBAA
Detailed Visual Inspection of the Top
Wing Skin and Stringer Joint at Rib 18
Sheet 01
Sheet 02
(a) As shown in Fig. A-UBBAA Sheet 01
 and Fig. A-UBBAA Sheet 02
 , inspect the
stringer joint:
1
 At Rib 18, STGR 11 to STGR 18, do a DET of the stringer joint (including
attached flange, stringer web, side strap, free flange and crown strap) in
accordance with NTM 51-70-00.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 15
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A300-600
SERVICE BULLETIN
(3) Subtask 576118-831-401-001 - Modify the Str inger Joint Couplings at Rib 18 LH
Wing
Work Zones and Access Panels
Zone
 Access/Work location
500
 Work location
 Rib 18
from Stringer 11 to Stringer 18
Manpower Resources
Manhours
 16.00
Minimum number of person
 2
Subtask elapsed time
 8.00
Skills
 AIRFRAME
Material necessary to do the job
Kit 576118B01R00
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 NSA5479BV4-8X
 24
 BOLT
2
 NSA5479BV4-11X
 16
 BOLT
3
 NSA5477VHK4-5
 16
 BOLT
4
 NSA5477VHK4-10
 32
 BOLT
5
 NSA5477VHK4-9
 16
 BOLT
6
 NSA5472-4K7
 104
 NUT
NOTE
: To accomplish this Service Bulletin on one aircraft you will require two of
Kit 576118B01R00.
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Polysulfide Sealant - Fuel
Tank Fillet
06ABB1
 As required
References
Non Destructive Test Manual (NTM)
 57-25-38
57-29-02
Structural Repair Manual (SRM)
 51-40-44
Fig. A-UBAAA
Modification of the Stringer Joint
Couplings at Rib 18
Sheet 01
Sheet 02
Sheet 03
(a) As shown in Fig. A-UBAAA Sheet 01
 and Fig. A-UBAAA Sheet 02
 , modify the
stringer joint couplings:
1
 At Rib 18, STGR 11 and STGR 14, remove:
4 Rivet Discard
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 16
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A300-600
SERVICE BULLETIN
12 Bolt Discard
16 Nut Discard
2
 As shown in Fig. A-UBAAA Sheet 01
 , View B and Fig. A-UBAAA Sheet
02
, View F, drill the fastener holes to first oversize in the upper wing skin
in accordance with SRM 51-40-44 and the fastener table on Fig. A-UBAAA
Sheet 03
.
3
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View F, do a Special Detailed Inspection (SDI) (Roto-probe) of the fastener
holes in the upper wing skin in accordance with NTM 57-29-02.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
4
 At Rib 18, STGR 11 and STGR 14, refer to Fig. A-UBAAA Sheet 01
 ,V i e wB
and Fig. A-UBAAA Sheet 02
 ,V i e wG ,u s e :
Polysulfide Sealant
- Fuel Tank Fillet
06ABB1 As required
and wet install:
4 Bolt NSA5477VHK4-5 Item 3
8 Bolt NSA5477VHK4-10 Item 4
4 Bolt NSA5477VHK4-9 Item 5
16 Nut NSA5472-4K7 Item 6
5
 At Rib 18, STGR 12 and STGR 15, remove:
4 Rivet Discard
12 Bolt Discard
16 Nut Discard
6
 As shown in Fig. A-UBAAA Sheet 01
 , View B and Fig. A-UBAAA Sheet
02
, View F, drill the fastener holes to first oversize in the upper wing skin
in accordance with SRM 51-40-44 and the fastener table on Fig. A-UBAAA
Sheet 03
.
7
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View F, do a SDI (Roto-probe) of the fastener holes in the upper wing skin in
accordance with NTM 57-29-02.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 17
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A300-600
SERVICE BULLETIN
8
 At Rib 18, STGR 12 and STGR 15, refer to Fig. A-UBAAA Sheet 01
 ,V i e wB
and Fig. A-UBAAA Sheet 02
 ,V i e wG ,u s e :
Polysulfide Sealant
- Fuel Tank Fillet
06ABB1 As required
and wet install:
4 Bolt NSA5477VHK4-5 Item 3
8 Bolt NSA5477VHK4-10 Item 4
4 Bolt NSA5477VHK4-9 Item 5
16 Nut NSA5472-4K7 Item 6
9
 At Rib 18, STGR 13 and STGR 17, remove:
4 Rivet Discard
12 Bolt Discard
16 Nut Discard
10
 As shown in Fig. A-UBAAA Sheet 01
 , View B and Fig. A-UBAAA Sheet
02
, View F, drill the fastener holes to first oversize in the upper wing skin
in accordance with SRM 51-40-44 and the fastener table on Fig. A-UBAAA
Sheet 03
.
11
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View F, do a SDI (Roto-probe) of the fastener holes in the upper wing skin in
accordance with NTM 57-29-02.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
12
 At Rib 18, STGR 13 and STGR 17, refer to Fig. A-UBAAA Sheet 01
 ,V i e wB
and Fig. A-UBAAA Sheet 02
 ,V i e wG ,u s e :
Polysulfide Sealant
- Fuel Tank Fillet
06ABB1 As required
and wet install:
4 Bolt NSA5477VHK4-5 Item 3
8 Bolt NSA5477VHK4-10 Item 4
4 Bolt NSA5477VHK4-9 Item 5
16 Nut NSA5472-4K7 Item 6
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 18
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A300-600
SERVICE BULLETIN
13
 At Rib 18, STGR 16 and STGR 18, remove:
4 Rivet Discard
12 Bolt Discard
16 Nut Discard
14
 As shown in Fig. A-UBAAA Sheet 01
 , View B and Fig. A-UBAAA Sheet
02
, View F, drill the fastener holes to first oversize in the upper wing skin
in accordance with SRM 51-40-44 and the fastener table on Fig. A-UBAAA
Sheet 03
.
15
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View F, do a SDI (Roto-probe) of the fastener holes in the upper wing skin in
accordance with NTM 57-29-02.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
16
 At Rib 18, STGR 16 and STGR 18, refer to Fig. A-UBAAA Sheet 01
 ,V i e wB
and Fig. A-UBAAA Sheet 02
 ,V i e wG ,u s e :
Polysulfide Sealant
- Fuel Tank Fillet
06ABB1 As required
and wet install:
4 Bolt NSA5477VHK4-5 Item 3
8 Bolt NSA5477VHK4-10 Item 4
4 Bolt NSA5477VHK4-9 Item 5
16 Nut NSA5472-4K7 Item 6
(b) As shown in Fig. A-UBAAA Sheet 01
 , View B and Fig. A-UBAAA Sheet 02
 ,V i e wD ,
modify the stringer web including the cleat couplings:
1
 At Rib 18, STGR 11 and STGR 14, remove:
10 Bolt Discard
10 Nut Discard
2
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View D, drill the fastener holes to first oversize in the stringer web including
the cleat in accordance with SRM 51-40-44 and the fastener table on Fig. A-
UBAAA Sheet 03
.
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 19
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A300-600
SERVICE BULLETIN
3
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View D, do a SDI (Roto-probe) of the fastener holes in the stringer web
including the cleat in accordance with NTM 57-25-38.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
4
 At Rib 18, STGR 11 and STGR 14, refer to Fig. A-UBAAA Sheet 01
 ,V i e wB
and Fig. A-UBAAA Sheet 02
 ,V i e wE ,u s e :
Polysulfide Sealant
- Fuel Tank Fillet
06ABB1 As required
and wet install:
6 Bolt NSA5479BV4-8X Item 1
4 Bolt NSA5479BV4-11X Item 2
10 Nut NSA5472-4K7 Item 6
5
 At Rib 18, STGR 12 and STGR 15, remove:
10 Bolt Discard
10 Nut Discard
6
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View D, drill the fastener holes to first oversize in the stringer web including
the cleat in accordance with SRM 51-40-44 and the fastener table on Fig. A-
UBAAA Sheet 03
.
7
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View D, do a SDI (Roto-probe) of the fastener holes in the stringer web
including the cleat in accordance with NTM 57-25-38.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
8
 At Rib 18, STGR 12 and STGR 15, refer to Fig. A-UBAAA Sheet 01
 ,V i e wB
and Fig. A-UBAAA Sheet 02
 ,V i e wE ,u s e :
Polysulfide Sealant
- Fuel Tank Fillet
06ABB1 As required
and wet install:
6 Bolt NSA5479BV4-8X Item 1
4 Bolt NSA5479BV4-11X Item 2
10 Nut NSA5472-4K7 Item 6
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 20
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A300-600
SERVICE BULLETIN
9
 At Rib 18, STGR 13 and STGR 17, remove:
10 Bolt Discard
10 Nut Discard
10
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View D, drill the fastener holes to first oversize in the stringer web including
the cleat in accordance with SRM 51-40-44 and the fastener table on Fig. A-
UBAAA Sheet 03
.
11
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View D, do a SDI (Roto-probe) of the fastener holes in the stringer web
including the cleat in accordance with NTM 57-25-38.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
12
 At Rib 18, STGR 13 and STGR 17, refer to Fig. A-UBAAA Sheet 01
 ,V i e wB
and Fig. A-UBAAA Sheet 02
 ,V i e wE ,u s e :
Polysulfide Sealant
- Fuel Tank Fillet
06ABB1 As required
and wet install:
6 Bolt NSA5479BV4-8X Item 1
4 Bolt NSA5479BV4-11X Item 2
10 Nut NSA5472-4K7 Item 6
13
 At Rib 18, STGR 16 and STGR 18, remove:
10 Bolt Discard
10 Nut Discard
14
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View D, drill the fastener holes to first oversize in the stringer web including
the cleat in accordance with SRM 51-40-44 and the fastener table on Fig. A-
UBAAA Sheet 03
.
15
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View D, do a SDI (Roto-probe) of the fastener holes in the stringer web
including the cleat in accordance with NTM 57-25-38.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 21
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A300-600
SERVICE BULLETIN
16
 At Rib 18, STGR 16 and STGR 18 Fig. A-UBAAA Sheet 01
 , View B and Fig.
A-UBAAA Sheet 02
,V i e wE ,u s e :
Polysulfide Sealant
- Fuel Tank Fillet
06ABB1 As required
and wet install:
6 Bolt NSA5479BV4-8X Item 1
4 Bolt NSA5479BV4-11X Item 2
10 Nut NSA5472-4K7 Item 6
(4) Subtask 576118-220-403-001 - Do a Detailed Visual Inspection of the Top Wing
Skin at Rib 18 RH Wing
Work Zones and Access Panels
Zone
 Access/Work location
600
 Work location
 Rib 18
from Stringer 11 to Stringer 18
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Non Destructive Test Manual (NTM)
 51-70-00
Fig. A-UBBAA
Detailed Visual Inspection of the Top
Wing Skin and Stringer Joint at Rib 18
Sheet 01
Sheet 02
(a) As shown in Fig. A-UBBAA Sheet 01
 and Fig. A-UBBAA Sheet 02
 , inspect the top
wing skin:
1
 At Rib 18, STGR 11 to STGR 18, do a DET of the top wing skin external
surface in accordance with NTM 51-70-00.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 22
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29

@A300-600
SERVICE BULLETIN
(5) Subtask 576118-220-404-001 - Do a Detailed Visual Inspection of the Stringer Joint
(including Attached Fla nge, Stringer Web, Side Strap, Free Flange and Crown
Strap) at Rib 18 RH Wing
Work Zones and Access Panels
Zone
 Access/Work location
600
 Work location
 Rib 18
from Stringer 11 to Stringer 18
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Non Destructive Test Manual (NTM)
 51-70-00
Fig. A-UBBAA
Detailed Visual Inspection of the Top
Wing Skin and Stringer Joint at Rib 18
Sheet 01
Sheet 02
(a) As shown in Fig. A-UBBAA Sheet 01
 and Fig. A-UBBAA Sheet 02
 inspect the
stringer joint:
1
 At Rib 18, STGR 11 to STGR 18, do a DET of the stringer joint (including
attached flange, stringer web, side strap, free flange and crown strap) in
accordance with NTM 51-70-00.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
(6) Subtask 576118-831-402-001 - Modify the Str inger Joint Couplings at Rib 18 RH
Wing
Work Zones and Access Panels
Zone
 Access/Work location
600
 Work location
 Rib 18
from Stringer 11 to Stringer 18
Manpower Resources
Manhours
 16.00
Minimum number of person
 2
Subtask elapsed time
 8.00
Skills
 AIRFRAME
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 23
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 30

@A300-600
SERVICE BULLETIN
Material necessary to do the job
Kit 576118B01R00
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 NSA5479BV4-8X
 24
 BOLT
2
 NSA5479BV4-11X
 16
 BOLT
3
 NSA5477VHK4-5
 16
 BOLT
4
 NSA5477VHK4-10
 32
 BOLT
5
 NSA5477VHK4-9
 16
 BOLT
6
 NSA5472-4K7
 104
 NUT
NOTE
: To accomplish this Service Bulletin on one aircraft you will require two of
Kit 576118B01R00.
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Polysulfide Sealant - Fuel
Tank Fillet
06ABB1
 As required
References
Non Destructive Test Manual (NTM)
 57-25-38
57-29-02
Structural Repair Manual (SRM)
 51-40-44
Fig. A-UBAAA
Modification of the Stringer Joint
Couplings at Rib 18
Sheet 01
Sheet 02
Sheet 03
(a) As shown in Fig. A-UBAAA Sheet 01
 and Fig. A-UBAAA Sheet 02
 , modify the
stringer joint couplings:
1
 At Rib 18, STGR 11 and STGR 14, remove:
4 Rivet Discard
12 Bolt Discard
16 Nut Discard
2
 As shown in Fig. A-UBAAA Sheet 01
 , View B and Fig. A-UBAAA Sheet
02
, View F, drill the fastener holes to first oversize in the upper wing skin
in accordance with SRM 51-40-44 and the fastener table on Fig. A-UBAAA
Sheet 03
.
3
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View F, do a SDI (Roto-probe) of the fastener holes in the upper wing skin in
accordance with NTM 57-29-02.
- If damage is found contact AIRBUS
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 24
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 31

@A300-600
SERVICE BULLETIN
- If no damage is found continue with the worksteps below.
4
 At Rib 18, STGR 11 and STGR 14, refer to Fig. A-UBAAA Sheet 01
 ,V i e wB
and Fig. A-UBAAA Sheet 02
 ,V i e wG ,u s e :
Polysulfide Sealant
- Fuel Tank Fillet
06ABB1 As required
and wet install:
4 Bolt NSA5477VHK4-5 Item 3
8 Bolt NSA5477VHK4-10 Item 4
4 Bolt NSA5477VHK4-9 Item 5
16 Nut NSA5472-4K7 Item 6
5
 At Rib 18, STGR 12 and STGR 15, remove:
4 Rivet Discard
12 Bolt Discard
16 Nut Discard
6
 As shown in Fig. A-UBAAA Sheet 01
 , View B and Fig. A-UBAAA Sheet
02
, View F, drill the fastener holes to first oversize in the upper wing skin
in accordance with SRM 51-40-44 and the fastener table on Fig. A-UBAAA
Sheet 03
.
7
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View F, do a SDI (Roto-probe) of the fastener holes in the upper wing skin in
accordance with NTM 57-29-02.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
8
 At Rib 18, STGR 12 and STGR 15, refer to Fig. A-UBAAA Sheet 01
 ,V i e wB
and Fig. A-UBAAA Sheet 02
 ,V i e wG ,u s e :
Polysulfide Sealant
- Fuel Tank Fillet
06ABB1 As required
and wet install:
4 Bolt NSA5477VHK4-5 Item 3
8 Bolt NSA5477VHK4-10 Item 4
4 Bolt NSA5477VHK4-9 Item 5
16 Nut NSA5472-4K7 Item 6
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 25
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 32

@A300-600
SERVICE BULLETIN
9
 At Rib 18, STGR 13 and STGR 17, remove:
4 Rivet Discard
12 Bolt Discard
16 Nut Discard
10
 As shown in Fig. A-UBAAA Sheet 01
 , View B and Fig. A-UBAAA Sheet
02
, View F, drill the fastener holes to first oversize in the upper wing skin
in accordance with SRM 51-40-44 and the fastener table on Fig. A-UBAAA
Sheet 03
.
11
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View F, do a SDI (Roto-probe) of the fastener holes in the upper wing skin in
accordance with NTM 57-29-02.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
12
 At Rib 18, STGR 13 and STGR 17, refer to Fig. A-UBAAA Sheet 01
 ,V i e wB
and Fig. A-UBAAA Sheet 02
 ,V i e wG ,u s e :
Polysulfide Sealant
- Fuel Tank Fillet
06ABB1 As required
and wet install:
4 Bolt NSA5477VHK4-5 Item 3
8 Bolt NSA5477VHK4-10 Item 4
4 Bolt NSA5477VHK4-9 Item 5
16 Nut NSA5472-4K7 Item 6
13
 At Rib 18, STGR 16 and STGR 18, remove:
4 Rivet Discard
12 Bolt Discard
16 Nut Discard
14
 As shown in Fig. A-UBAAA Sheet 01
 , View B and Fig. A-UBAAA Sheet
02
, View F, drill the fastener holes to first oversize in the upper wing skin
in accordance with SRM 51-40-44 and the fastener table on Fig. A-UBAAA
Sheet 03
.
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 26
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 33

@A300-600
SERVICE BULLETIN
15
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View F, do a SDI (Roto-probe) of the fastener holes in the upper wing skin in
accordance with NTM 57-29-02.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
16
 At Rib 18, STGR 16 and STGR 18, refer to Fig. A-UBAAA Sheet 01
 ,V i e wB
and Fig. A-UBAAA Sheet 02
 ,V i e wG ,u s e :
Polysulfide Sealant
- Fuel Tank Fillet
06ABB1 As required
and wet install:
4 Bolt NSA5477VHK4-5 Item 3
8 Bolt NSA5477VHK4-10 Item 4
4 Bolt NSA5477VHK4-9 Item 5
16 Nut NSA5472-4K7 Item 6
with
(b) As shown in Fig. A-UBAAA Sheet 01
 , View B and Fig. A-UBAAA Sheet 02
 ,V i e wD ,
modify the rib stringer web including the cleat couplings:
1
 At Rib 18, STGR 11 and STGR 14, remove:
10 Bolt Discard
10 Nut Discard
2
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View D, drill the fastener holes to first oversize in the stringer web including
the cleat in accordance with SRM 51-40-44 and the fastener table on Fig. A-
UBAAA Sheet 03
.
3
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View D, do a SDI (Roto-probe) of the fastener holes in the stringer web
including the cleat in accordance with NTM 57-25-38.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
4
 At Rib 18, STGR 11 and STGR 14, refer to Fig. A-UBAAA Sheet 01
 ,V i e wB
and Fig. A-UBAAA Sheet 02
 ,V i e wE ,u s e :
Polysulfide Sealant
- Fuel Tank Fillet
06ABB1 As required
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 27
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 34

@A300-600
SERVICE BULLETIN
and wet install:
6 Bolt NSA5479BV4-8X Item 1
4 Bolt NSA5479BV4-11X Item 2
10 Nut NSA5472-4K7 Item 6
5
 At Rib 18, STGR 12 and STGR 15, remove:
10 Bolt Discard
10 Nut Discard
6
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View D, drill the fastener holes to first oversize in the stringer web including
the cleat in accordance with SRM 51-40-44 and the fastener table on Fig. A-
UBAAA Sheet 03
.
7
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View D, do a SDI (Roto-probe) of the fastener holes in the stringer web
including the cleat in accordance with NTM 57-25-38.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
8
 At Rib 18, STGR 12 and STGR 15, refer to Fig. A-UBAAA Sheet 01
 ,V i e wB
and Fig. A-UBAAA Sheet 02
 ,V i e wE ,u s e :
Polysulfide Sealant
- Fuel Tank Fillet
06ABB1 As required
and wet install:
6 Bolt NSA5479BV4-8X Item 1
4 Bolt NSA5479BV4-11X Item 2
10 Nut NSA5472-4K7 Item 6
9
 At Rib 18, STGR 13 and STGR 17, remove:
10 Bolt Discard
10 Nut Discard
10
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View D, drill the fastener holes to first oversize in the stringer web including
the cleat in accordance with SRM 51-40-44 and the fastener table on Fig. A-
UBAAA Sheet 03
.
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 28
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 35

@A300-600
SERVICE BULLETIN
11
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View D, do a SDI (Roto-probe) of the fastener holes in the stringer web
including the cleat in accordance with NTM 57-25-38.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
12
 At Rib 18, STGR 13 and STGR 17, refer to Fig. A-UBAAA Sheet 01
 ,V i e wB
and Fig. A-UBAAA Sheet 02
 ,V i e wE ,u s e :
Polysulfide Sealant
- Fuel Tank Fillet
06ABB1 As required
and wet install:
6 Bolt NSA5479BV4-8X Item 1
4 Bolt NSA5479BV4-11X Item 2
10 Nut NSA5472-4K7 Item 6
13
 At Rib 18, STGR 16 and STGR 18, remove:
10 Bolt Discard
10 Nut Discard
14
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View D, drill the fastener holes to first oversize in the stringer web including
the cleat in accordance with SRM 51-40-44 and the fastener table on Fig. A-
UBAAA Sheet 03
.
15
 As shown in Fig. A-UBAAA Sheet 01
 ,V i e wBa n d Fig. A-UBAAA Sheet 02
 ,
View D, do a SDI (Roto-probe) of the fastener holes in the stringer web
including the cleat in accordance with NTM 57-25-38.
- If damage is found contact AIRBUS
- If no damage is found continue with the worksteps below.
16
 At Rib 18, STGR 16 and STGR 18, refer to Fig. A-UBAAA Sheet 01
 ,V i e wB
and Fig. A-UBAAA Sheet 02
 ,V i e wE ,u s e :
Polysulfide Sealant
- Fuel Tank Fillet
06ABB1 As required
and wet install:
6 Bolt NSA5479BV4-8X Item 1
4 Bolt NSA5479BV4-11X Item 2
10 Nut NSA5472-4K7 Item 6
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 29
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 36

@A300-600
SERVICE BULLETIN
D. TEST
None
E. CLOSE-UP
(1) Subtask 576118-410-401-001 - Close Access
Work Zones and Access Panels
Zone
 Access/Work location
550
 Access
 Panel 550BB
650
 Access
 Panel 650BB
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 28-10-00, Page Block 301
28-11-22, Page Block 401
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close Up procedure as specified in AMM Task ’STORAGE - SERVICING
(Fuel Tank Draining, Venting and Entry - Leaving a Fuel Tank)’, refer to AMM
28-10-00, Page Block 301.
(c) Install the manhole covers for the wing tanks outer 550BB LH and (650BB RH),
refer to AMM 28-11-22, Page Block 401.
(d) Remove the access platforms from the wing tanks outer - Zones 550 LH (650 RH).
(e) Put the aircraft back to its initial configuration.
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 30
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 37

@A300-600
SERVICE BULLETIN
**CONF ALL
LH SHOWN
RH SIMILAR
A
FRONT SPAR
REAR SPAR
CENTER SPAR
Z500
Z600
NOTE:
AREA OF MODIFICATION
RIB18
A
A
STRINGERS 11
THRU 18 AT RIB 18
STGR11
STGR12
STGR13
STGR14
STGR15
STGR16
STGR17
STGR18
RIB18
C
B
FIGURE 2
TOP SKIN PANEL 3 IN THE AREA OF THE STRINGER JOINTS
B
F G
C
RIB18
FWD
D E
D_SB_576118_7_BAAA_01_00
Figure A-UBAAA - Sheet 01
Modification of the Stringer Joint Couplings at Rib 18
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 31
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 38

@A300-600
SERVICE BULLETIN
**CONF ALL
RIB18
CLEAT
BEFORE AFTER
BEFORE AFTER
TOP SKIN NOT SHOWN FOR CLARITY
RIB18
TOP SKIN NOT SHOWN FOR CLARITY
RIB18
RIB18
CLEAT
NOTE: FOR FASTENER IDENTIFICATION TABLE SEE SHEET 3.
F
W
D
F
W
D
F
W
D
F
W
D
RIVET
D
FIGURE 4
STRINGERS 11 TO 18 BOLTING AT RIB 18 SHOWING BOLT POSITIONS
THAT ARE TO BE REMOVED AND HOLES SDET INSPECTED
FIGURE 4
E
F G
FIGURE 5FIGURE 5
STRINGERS 11 TO 18 BOLTING AT RIB 18 SHOWING BOLT POSITIONS
THAT ARE TO BE REMOVED AND HOLES SDET INSPECTED
STRINGERS 11 TO 18 BOLTING AT RIB 18 SHOWING BOLT
POSITIONS THAT ARE TO BE INSTALLED
STRINGERS 11 TO 18 BOLTING AT RIB 18 SHOWING BOLT
POSITIONS THAT ARE TO BE INSTALLED
SIDE STRAP
FREE FLANGE STRINGER WEB CROWN STRAP
TOP SKIN ATTACHED FLANGE SIDE STRAP
FREE FLANGE STRINGER WEB CROWN STRAP
TOP SKIN ATTACHED FLANGE
D_SB_576118_7_BAAA_02_01
Figure A-UBAAA - Sheet 02
Modification of the Stringer Joint Couplings at Rib 18
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 32
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 39

@A300-600
SERVICE BULLETIN
**CONF ALL
BOLT
NUT
NSA5479BV4−8X
NSA5472−4K7
6.746 mm
(0.2656 in)
6.797 mm
(0.2676 in)
1st OVERSIZE
CLEARANCE FIT
1
6
BOLT
NUT
NSA5479BV4−11X
NSA5472−4K7
6.746 mm
(0.2656 in)
6.797 mm
(0.2676 in)
1st OVERSIZE
CLEARANCE FIT
2
6
BOLT
NUT
NSA5477VHK4−5
NSA5472−4K7
6.607 mm
(0.2601 in)
6.657 mm
(0.2621 in)
1st OVERSIZE
INTERFERENCE FIT
3
6
BOLT
NUT
NSA5477VHK4−10
NSA5472−4K7
1st OVERSIZE
INTERFERENCE FIT
4
6
BOLT
NUT
NSA5477VHK4−9
NSA5472−4K7
1st OVERSIZE
INTERFERENCE FIT
5
6
6.607 mm
(0.2601 in)
6.657 mm
(0.2621 in)
6.607 mm
(0.2601 in)
6.657 mm
(0.2621 in)
DESC PART NO. FINAL HOLE DIAMETER REMARKSITEM NO.SYMBOL
MINIMUM MAXIMUM
EXISTING FASTENERS
FASTENERS REMOVED
FASTENER TABLE
STRINGERS 11 TO 18 FASTENERS AT RIB 18 SHOWING
FASTENER TYPES THAT ARE TO BE INSTALLED
D_SB_576118_7_BAAA_03_00
Figure A-UBAAA - Sheet 03
Modification of the Stringer Joint Couplings at Rib 18
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 33
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 40

@A300-600
SERVICE BULLETIN
**CONF ALL
LH SHOWN
RH SIMILAR
A
FRONT SPAR
REAR SPAR
CENTER SPAR
Z500
Z600
RIB18
A
A
STRINGERS 11
THRU 18 AT RIB 18
STGR11
STGR12
STGR13
STGR14
STGR15
STGR16
STGR17
STGR18
RIB18
C
B
C
RIB18
FIGURE 2
TOP SKIN PANEL 3 IN THE AREA OF THE STRINGER JOINTS
B
FWD
D
TYPICAL
C
C
C
C
C
C
C
ATTACHED
E
FLANGE
D_SB_576118_7_BBAA_01_01
Figure A-UBBAA - Sheet 01
Detailed Visual Inspection of the Top Wing Skin and Stringer Joint at Rib 18
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 34
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 41

@A300-600
SERVICE BULLETIN
**CONF ALL
NOTE:
AREA TO BE INSPECTED
STRINGERS 11 TO 18 AT RIB 18
SHOWING AREA TO BE INSPECTED
D
SIDE STRAPTOP SKIN ATTACHED FLANGE
FREE FLANGE STRINGER WEB CROWN STRAP
TOP SKIN NOT SHOWN FOR CLARITY
RIB18
F
W
D E
D_SB_576118_7_BBAA_02_01
Figure A-UBBAA - Sheet 02
Detailed Visual Inspection of the Top Wing Skin and Stringer Joint at Rib 18
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 35
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 42

@A300-600
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 36
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 43

@A300-600
SERVICE BULLETIN
Appendix 01 - Manpower Gantt Chart
**CONF ALL
ELAPSED TIME ASSUMPTION SERVICE BULLETIN No. A300−57−6118
MH
ET/S:
PER
MANHOURS
ELAPSED TIME PER STEP
NUMBER OF PERSONS
01
02
THIS CHART IS ONLY A PROPOSAL.
OPERATORS MAY DETERMINE THAT ANOTHER WAY
TO DO THE WORK IS MORE SUITABLE FOR THEM.
01
02
NOTES:
:
:
IF A VSB IS INVOLVED, THE ASSOCIATED MANHOURS
ARE NOT REFLECTED IN THIS GANTT CHART.
SB ELAPSED TIME
(HOURS)
GET ACCESS
MH ET/S
TOTAL MANHOURS
SB ELAPSED TIME
37.00
11.50
STEPS
1.50 1.50
0
16.00 8.00
CLOSE−UP
PER
1
2
8.00216.00
MODIFY THE STRINGER JOINT COUPLINGS AT
MODIFY THE STRINGER JOINT COUPLINGS AT
RIB 18 RH WING
1.50 1.50 1
1234567 891 0 1 1 1 2 1 3
RIB 18 LH WING
0.50 0.501DO A DETAILED VISUAL INSPECTION OF THE TOP WING SKIN
AT RIB 18 LH WING
0.50 0.501
0.50 0.501
0.50 0.501DO A DETAILED VISUAL INSPECTION OF THE STRINGER JOINT
(INCLUDING ATTACHED FLANGE, STRINGER WEB, SIDE STRAP,
FREE FLANGE AND CROWN STRAP) AT RIB 18 LH WING
DO A DETAILED VISUAL INSPECTION OF THE TOP WING SKIN
AT RIB 18 RH WING
DO A DETAILED VISUAL INSPECTION OF THE STRINGER JOINT
(INCLUDING ATTACHED FLANGE, STRINGER WEB, SIDE STRAP,
FREE FLANGE AND CROWN STRAP) AT RIB 18 RH WING
D_SB_576118_7_AAAA_01_02
Figure A-UAAAA - Sheet 01
Manpower Gantt Chart
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 44

@A300-600
SERVICE BULLETIN
Service Bulletin REPORTING
TITLE: WING - STRUCTURE - STRINGER JOINT AT RIB 18 (OVERSIZE
ATTACHMENT HOLES)
MODIFICATION No.: 13611H5752
SB Reporting status
This Service Bulletin will only be incorporated into affected customized Maintenance and Flight
Operations Products if it is duly reported to Airbus.
General information
The SB Reporting policy is published in ISI 00.00.00135. This document provides information regarding:
the SB Reporting means and benefits, the update of customized Maintenance Products and customized
Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations Products" for
further information on the update of affected Flight Operations Products.
SB Reporting procedure
Standard practice to report SB is to use the online reporting application on AirbusWorld.
Refer to ISI 00.00.00179:
- For complete information on reporting means to Airbus. Question 2 "What are the standard
practices for SB reporting?"
- If this SB requires previous or simultaneous accomplishment of other SBs, Question 3 "What about
the reporting of prerequisite Service Bulletin?"
NOTE:
 ISI 00.00.00179 covers all the frequently asked questions about SB Reporting. It is revised on a
regular basis.
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 45

@A300-600
SERVICE BULLETIN
QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin. The reported data
that you provide us will be used to analyse areas of difficulties and to take corrective action to further
improve the quality of our Service Bulletins.
We thank you for the time you have taken in completing this form.
(Please rate on a scale of 1 to 4, with 4 being the highest score)
- Quality rating of this SB 4321
- Quality rating of the Accomplishment Instructions 4321
- Quality rating of the Illustrations 4321
- Is this SB easy to understand ? Y/N
If you have had difficulties in the accomplishment of this SB please quote below the area(s) and give a
short description of the issue.
Planning Material Instructions
X Effectivity X Kit content X Preparation
X Reason X List of Materials Operator Supplied X Mod/Inspection
X Manpower X Industry support X Test
X References X Re-identification X Close-Up
X Publication X Tooling X Illustrations
Comments:
Operator: Date:
Name/Title:
Please return this form to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn : SEM4 Service Bulletins Management
F A X:( 3 3 )56 19 34 25 1
Or via your Resident Customer Support Office.
DATE: Jun 30/15 SERVICE BULLETIN No.: A300-57-6118
REVISION No.: 01 - Jan 31/17 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
