# Airbus Service Bulletin A310-53-2136: No revision named

- Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2015-0243; AD 2016-05-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Airbus Service Bulletin A310-53-2136](https://openairdocs.org/service-documents/airbus/a310-53-2136.md)
- Title as filed: FAA-2015-0243_SB A310-53-2136
- Pages: 23
- PDF: https://openairdocs.org/files/sha256/1e/35/1e35c679b7bf89492e2ed7e51d6d91575405257a1eaeb7812ee727b4f28b55d2
- Page: https://openairdocs.org/service-documents/airbus/a310-53-2136/file/1e35c679b7bf

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A310
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 53
TITLE: FUSELAGE - FUSELAGE TAIL SECTION AND TAIL CONE FR80-FR103
- REINFORCE THS SUPPORT STRUTS AT FR91 BY CLAMPS
**CONF ALL
MODIFICATIONS
MODIFICATION CLASSIFICATION
MAJOR
 13682D23322
MINOR
 None
NOTE
: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting the
airworthiness of the product. All other changes are major changes.
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
The Trimmable Horizontal Stabilizer (THS) is supported and articulated at Frame 91. Any lateral
movement is prevented by four diagonal support struts.
During maintenance, support struts have been found cracked on some aircraft.
The affected area is the strut end and typical cracks are longitudinal. On some aircraft, several cracks
per support strut have been found.
Inspection Service Bulletin A310-53-2137 inspects the struts for cracks.
This Service Bulletin installs reinforcing clamps on the strut ends as a temporary solution. A permanent
solution is expected to be introduced by Service Bulletin at a later date.
By installing the clamp, the circumferential stresses in the rod-ends are reduced and the circular shape
of the rod end is supported.
As a result, the tendency to stress corrosion of the rod ends is stopped (or partially reduced) due to the
lower circumferential stresses.
Furthermore, the steel insert in the rod ends is properly kept in place due to maintaining the circular
shape of the rod ends even in case of existing cracks.
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A310
SERVICE BULLETIN
SUMMARY
Depending on the result of the check (aircraft record or physical check) required in inspection Service
Bulletin A310-53-2137, it is possible that clamps installation is not required on one or some struts
(mixture of clamp installation is possible).
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 ETOPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 NO
NOTE
 (1)
: Service Bulletin must be accomplished.
MATERIAL PRICE INFORMATION
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Kit 532136D01R00
 1
 2,100.00
 Clamps
EFFECTIVITY
This Service Bulletin is applicable to this (these) operator(s) :
18T 19U 40T 52X 58X 82Z 85Z 98W 99Y AFG AIC BAF BBC
C9L CFC DGA FDX GAF HFY IRA IRM IYE JAV K1P KAC KZU
MGL PCA PIA QAF R1T RJA ROT RZO SBI SGX SUD THY TSC
UBD UZB WHT
CONCURRENT REQUIREMENTS
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment of the
following Service Bulletin(s) as per effectivity specified in this (these) Service Bulletin(s):
Service Bulletin No. A310-53-2137
NOTE
: A310-53-2137 FUSELAGE - TAIL CONE - THS SUPPORT STRUTS AT FR91 -
INSPECTION FOR CRACKS
REFERENCES / REPERCUSSIONS
TFU
 53.19.89.001
OEB
 None
AOT
 None
SIL
 None
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 None
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 2
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A310
SERVICE BULLETIN
SUMMARY
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 NO
HARD
 NO
SOFT
 NO
OBRM
 NO
MANPOWER
Task 532136-831-848-001: Modification
TOTAL MANHOURS
 2.00
ELAPSED TIME (HOURS)
 2.00
APPENDICES
None
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 3
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A310
SERVICE BULLETIN
SUMMARY
**CONF ALL
FR91
A
B
B
B
B
Z310
A
TYPICAL
CLAMP TO
BE ADDED
CLAMP TO
BE ADDED
B
B_SB_532136_6_SAAA_01_01
Figure A-GSAAA - Sheet 01
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 4
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A310
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 53
TITLE: FUSELAGE - FUSELAGE TAIL SECTION AND TAIL CONE FR80-FR103
- REINFORCE THS SUPPORT STRUTS AT FR91 BY CLAMPS
MODIFICATION No.: 13682D23322
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
Kit 532136D01R00 is only applicable on aircraft on which specific struts with PN R21449, PN
R21449D, PN R21449G or PN R21449H are installed.
This modification is applicable by Service Bulletin only.
(1) Models
310-203 310-221 310-222 310-304 310-308 310-322 310-324 310-325
(2) Effectivity by MSN
0162 0230 0237 0245 0248 0267 0278 0281 0283 0316 0331 0356-0357 0362 0364
0367 0369 0372 0378 0394 0399 0407 0410 0413 0418-0419 0421-0422 0425 0431
0434 0436-0437 0439 0441 0444-0447 0449 0452 0454 0456-0458 0467 0472-0473
0478 0480-0484 0488-0492 0494-0500 0502-0503 0519-0520 0522-0524 0526-0527
0537 0539 0545 0547 0549-0552 0562 0564-0565 0567-0568 0571 0574 0576
0585-0588 0590-0595 0597 0599-0600 0620 0622 0624 0636 0644 0646-0649
0651-0653 0656 0658 0660-0661 0663 0667 0671-0672 0674 0676 0678 0682 0687
0689 0691 0700 0702 0704 0706
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A310
SERVICE BULLETIN
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
18T
 0473
19U
 0399
40T
 0413
52X
 0410
58X
 0431
82Z
 0550 0551
85Z
 0527
98W
 0495
99Y
 0489
AFG
 0496 0497
AIC
 0407
BAF
 0367 0372
BBC
 0594 0700
C9L
 0652
CFC
 0425 0441 0444 0446 0482
DGA
 0418 0421 0422
FDX
 0162 0230 0237 0245 0248 0267 0278 0281 0283 0316 0331 0356
0362 0364 0369 0378 0394 0439 0449 0452 0454 0456 0457 0458
0467 0492 0500 0539 0549 0552 0593
GAF
 0434 0484 0498 0503 0522 0523
HFY
 0565
IRA
 0436 0671
IRM
 0488 0499 0524 0537 0547 0564 0567 0586 0595 0620
IYE
 0568 0702 0704
JAV
 0357 0481
K1P
 0648
KAC
 0647 0649 0663
KZU
 0592 0622 0646
MGL
 0526
PCA
 0419
PIA
 0585 0587 0590 0653 0656 0660 0676 0678 0682 0687 0689 0691
QAF
 0667
R1T
 0591
RJA
 0445 0490 0491
ROT
 0636 0644
RZO
 0571 0624 0651 0661
SBI
 0520
SGX
 0519 0562
SUD
 0437
THY
 0478 0480 0502
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 2
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A310
SERVICE BULLETIN
OPERATOR
 MSN
TSC
 0447 0472 0483 0545 0588 0597 0599 0600 0658
UBD
 0672 0674
UZB
 0574 0576 0706
WHT
 0494
(4) Configuration by MSN
MSN
 CONFIGURATION
0162 0230 0237 0245 0248 0267 0278 0281 0283 0316 0331
0356 0357 0362 0364 0367 0369 0372 0378 0394 0399 0407
0410 0413 0418 0419 0421 0422 0425 0431 0434 0436 0437
0439 0441 0444 0445 0446 0447 0449 0452 0454 0456 0457
0458 0467 0472 0473 0478 0480 0481 0482 0483 0484 0488
0489 0490 0491 0492 0494 0495 0496 0497 0498 0499 0500
0502 0503 0519 0520 0522 0523 0524 0526 0527 0537 0539
0545 0547 0549 0550 0551 0552 0562 0564 0565 0567 0568
0571 0574 0576 0585 0586 0587 0588 0590 0591 0592 0593
0594 0595 0597 0599 0600 0620 0622 0624 0636 0644 0646
0647 0648 0649 0651 0652 0653 0656 0658 0660 0661 0663
0667 0671 0672 0674 0676 0678 0682 0687 0689 0691 0700
0702 0704 0706
001
(5) Configuration definition
**CONF 001
Config. 001 is valid for all the aircraft given in the effectivity of this Service Bulletin as a
standard configuration.
(6) Material Effectivity
MATERIAL
 QTY PER A/C
 SEE NOTES
Kit 532136D01R00
 1
Consumable CMLD01
 As required
B. CONCURRENT REQUIREMENTS
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment of
the following Service Bulletin(s) as per effectivity specified in this (these) Service Bulletin(s):
Service Bulletin No. A310-53-2137
NOTE
: A310-53-2137 FUSELAGE - TAIL CONE - THS SUPPORT STRUTS AT FR91
- INSPECTION FOR CRACKS
C. REASON
(1) History
The Trimmable Horizontal Stabilizer (THS) is supported and articulated at Frame 91.
Any lateral movement is prevented by four diagonal support struts.
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 3
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A310
SERVICE BULLETIN
During maintenance, support struts have been found cracked on some aircraft.
The affected area is the strut end and typical cracks are longitudinal. On some aircraft,
several cracks per support strut have been found.
Inspection Service Bulletin A310-53-2137 inspects the struts for cracks.
(2) Objective/Action
This Service Bulletin installs reinforcing clamps on the strut ends as a temporary
solution. A permanent solution is expected to be introduced by Service Bulletin at a later
date.
(3) Advantages
By installing the clamp, the circumferential stresses in the rod-ends are reduced and the
circular shape of the rod end is supported.
As a result, the tendency to stress corrosion of the rod ends is stopped (or partially
reduced) due to the lower circumferential stresses.
Furthermore, the steel insert in the rod ends is properly kept in place due to maintaining
the circular shape of the rod ends ev en in case of existing cracks.
(4) Operational/Maintenance Consequences
Depending on the result of the check (aircraft record or physical check) required in
inspection Service Bulletin A310-53-2137, it is possible that clamps installation is not
required on one or some struts (mixture of clamp installation is possible).
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
Task 532136-831-848-001: Modification
(1) Install the clamps at the THS support struts
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin must be accomplished, when applicable, immediately after the first
inspection in accordance with the Inspection Service Bulletin A310-53-2137 requirement.
This Service Bulletin has been classified Mandatory by the issue of an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA). The AD must
be used as the reference document for the mandated accomplishment timescale.
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 4
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A310
SERVICE BULLETIN
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA.21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
Task 532136-831-848-001: Modification
Get Access
 0.50
On Aircraft
Install the clamps at the THS support struts
 1.00
Close-Up
 0.50
TOTAL MANHOURS
 2.00
ELAPSED TIME (HOURS)
 2.00
H. WEIGHT AND BALANCE
The weight and balance estimates given in this Service Bulletin are based on the
Manufacturer’s Empty Weight (MEW) and do not include operator items. For the definition of
MEW and operator’s items refer to Weight and Balance Manual (WBM) Chapter 1-00-07.
Manufacturers Empty Weight +2.198 KG (+4.8457 LB)
Effect on Balance +105.641 KGM (+764.101 LB.FT )
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
Aircraft Maintenance Manual (AMM)
 06-21-00 06-31-00 06-41-00
20-21-12 24-00-00
Consumable Material List (CML)
Elec. Std. Practices Manual (ESPM)
 20-55-00
Service Bulletin (SB)
 A310-53-2137
Standards Manual (SM)
Structural Repair Manual (SRM)
 51-24-00 51-40-20 51-40-30
Weight and Balance Manual (WBM)
 Chapter 1-00-07
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 5
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A310
SERVICE BULLETIN
K. PUBLICATION AFFECTED
Aircraft Maintenance Manual (AMM)
 53-10-47 53-10-88 53-19-21
Illustrated Parts Catalog (IPC)
 53-19-89
L. INTERCHANGEABILITY/MIXABILITY
Not Applicable
M. SPARES
None
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 6
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A310
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.
Customers with aircraft shown in the effectivity of this Service Bulletin should send a
purchase order to AIRBUS. Quote the number of this Service Bulletin. The address is:
NOTE
: Kit 532136D01R00 is only applicable on aircraft on which specific struts
with PN R21449, PN R21449D, PN R21449G or PN R21449H are
installed.
Kit 532136D01R00
 AIRBUS Material, Logistics and Suppliers
Weg beim Jaeger 150
D-22335 HAMBURG
GERMANY
For ordering by internet:
http://spares.airbus.com
For ordering by fax: +49 40 50 76 2590
For ordering by E-mail: airbus.kit@airbus.com
(2) Price and Availability
Kit 532136D01R00
Cost
 2,100.00 USD
Availability
 120 calendar days from receipt of order
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning schedule
with your order so that we can try to comply with your requirements. The sales terms
(costs and availability) are estimated in relation to economic conditions. The latest valid
price and lead time for ordering purposes shall be obtained through the AirbusSpares
portal or through a request for quotation to airbus.kit@airbus.com.
B. INDUSTRY SUPPORT INFORMATION
As a special policy applied to this Service Bulletin, AIRBUS will provide a 10% reduction to
the applicable kits sales prices given in the paragraph Price and Availability for orders placed
before Dec 31/19.
For the organisation of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department.
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
France
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 7
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A310
SERVICE BULLETIN
E-mail : monitored.retrofit@airbus.com
T e l:( 3 3 )56 71 90 62 2
F a x:( 3 3 )56 19 32 74 5
C. LIST OF COMPONENTS
Kit 532136D01R00
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
1
 A5347310320000
 16
 CLAMP
2
 NSA5031-5-38
 16
 BOLT
3
 NAS1149D0563K
 16
 WASHER
4
 NAS1726-5E
 16
 NUT
NOTE
: If you find part numbers of hardware components in the related kit(s) which
you cannot identify in the LIST OF COMPONENTS of this Service Bulletin,
refer to Standards Manual (SM). The SM will give you the correct part number
to part number relationship.
NOTE
: Kit 532136D01R00 is only applicable on aircraft on which specific struts with
PN R21449, PN R21449D, PN R21449G or PN R21449H are installed.
D. LIST OF MATERIALS - OPERATOR SUPPLIED
(1) Consumable Materials
Consumable CMLD01
ITEM
 DESCRIPTION
 REFERENCE TO CML
MAT. No.
QTY PER A/C
 SEE
NOTES
Coating-- Flexible Structure
 04QAB2
 As required
Polysulfide Sealant-Low Adhesion
Fillet Structure
06AEB2
 As required
Non Hardening Jointing Putty-High
Temp. Area Str
06LDG2
 As required
Corrosion Preventive Compound-
Water Displacing
12ADB1
 As required
(2) Components
None
(3) Equipment
None
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 8
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A310
SERVICE BULLETIN
F. TOOLING
None
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 9
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A310
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 10
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A310
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 532136-831-848-001 - Modification
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC; AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin refer to procedures
included in other AIRBUS documents. When the words ’refer to’ are used and the
operator has an accepted alternative procedure, the accepted alternative procedure
can be used. When the words ’in accordance with’ are included in the instruction,
the procedure in the AIRBUS document must be used.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. Other paragraphs are recommended and may be deviated
from, done as part of other actions or done with accepted methods different from
those given in the Service Bulletin, as long as the RC paragraphs can be done and
the aircraft can be put back into a serviceable condition.
Task Associated Data
Zone
310
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 11
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A310
SERVICE BULLETIN
Access
Door
 313AL
Manpower
TOTAL MANHOURS
 2.00
ELAPSED TIME (HOURS)
 2.00
A. GENERAL
(1) Subtask 532136-910-201-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-21-00, Page Block 001
06-31-00, Page Block 001
06-41-00, Page Block 001
20-21-12, Page Block 001
Consumable Material List (CML)
Structural Repair Manual (SRM)
 51-24-00
51-40-20
51-40-30
(a) For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Materials List (CML).
(b) For the Frame (FR) identification , refer to AMM 06-31-00, Page Block 001.
(c) For the identification of zones, refer to AMM 06-21-00, Page Block 001.
(d) For the identification of access panels, refer to AMM 06-41-00, Page Block 001.
(e) Torque tighten the standard threaded fasteners, refer to AMM 20-21-12, Page
Block 001.
(f) Remove and install fasteners in accordance with SRM 51-40-20.
(g) Apply sealant in accordance with SRM 51-24-00.
(h) Obtain alternative and substitute fastener data in accordance with SRM 51-40-30.
(i) If alternative and substitute fasteners have to be used, you must make sure that the
associated nut/collar are compatible in accordance with SRM 51-40-00 ’Mating Part’
column.
(j) If the length of any fastener specified in this Service Bulletin does not meet
installation standards given in SRM Chapter 51, then a fastener of the same
specification, or an approved substitute, with a length which meets the installation
standards given in SRM Chapter 51 may be used. In addition, washers may be
installed for fastener grip length in accordance with SRM Chapter 51.
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 12
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A310
SERVICE BULLETIN
(2) Subtask 532136-839-201-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
B. PREPARATION
(1) Subtask 532136-941-201-001 - Job Set-up
Work Zones and Access Panels
Zone
 Access/Work location
310
 Access
 Door 313AL
Work location
 Frame 91
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 24-00-00, Page Block 301
(a) The following items shall be considered as the basic Aircraft configuration before
you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety locks and the
wheel chocks are in position on the landing gear).
- Engine shut down, thrust reversers closed and locked.
- Aircraft in clean configuration.
- Parking brake applied.
- Aircraft electrical network de-energized.
- Hydraulic systems depressurized.
- Access to the cockpit and cabin is available.
- All circuit breakers are in closed position.
- All controls in NORM, AUTO or OFF position.
(b) Make sure that the aircraft is electrically grounded, refer to AMM 24-00-00, Page
Block 301.
(c) Put the access platform(s) in position below the access door 313AL.
(d) Open access door 313AL.
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 13
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A310
SERVICE BULLETIN
C. PROCEDURE
(1) Subtask 532136-420-201-001 - Install th e clamps at the THS support struts
Work Zones and Access Panels
Zone
 Access/Work location
310
 Work location
 Frame 91
Manpower Resources
Manhours
 1.00
Minimum number of person
 1
Subtask elapsed time
 1.00
Skills
 AIRFRAME
Material necessary to do the job
Kit 532136D01R00
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 A5347310320000
 16
 CLAMP
2
 NSA5031-5-38
 16
 BOLT
3
 NAS1149D0563K
 16
 WASHER
4
 NAS1726-5E
 16
 NUT
NOTE
: Kit 532136D01R00 is only applicable on aircraft on which specific struts
with PN R21449, PN R21449D, PN R21449G or PN R21449H are
installed.
Consumable CMLD01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Coating-- Flexible Structure
 04QAB2
 As required
Polysulfide Sealant-Low
Adhesion Fillet Structure
06AEB2
 As required
Non Hardening Jointing
Putty-High Temp. Area Str
06LDG2
 As required
Corrosion Preventive
Compound-Water
Displacing
12ADB1
 As required
References
Fig. A-GBAAA
Installation of the Clamps at the THS
Support Struts
Sheet 01
(a) Apply:
Refer to Fig. A-GBAAA Sheet 01
 ,V i e wC .
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 14
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A310
SERVICE BULLETIN
Polysulfide Sealant-
Low Adhesion Fillet
Structure
06AEB2 As required
to the interface surfaces of the clamps, Item 1.
NOTE
: Application of the sealant is required at the interfaces between the
two clamp halves and at the interfaces between the clamps and the
support struts.
(b) Apply to the bolts, Item 2:
Refer to Fig. A-GBAAA Sheet 01
 ,V i e wC .
Non Hardening
Jointing Putty-High
Temp. Area Str
06LDG2 As required
and install:
16 Clamp A5347310320000 Item 1
with:
Refer to Fig. A-GBAAA Sheet 01
 ,V i e w sAt oD .
NOTE
: Consider that the clamps must be installed within the cylindrical
area only.
NOTE
: Make sure that the dimension of the gap is between 3.0 mm and
3.5 mm (0.118 in and 0.138 in).
NOTE
: Before installation of the clamp, mark the correct position with a
pen.
16 Bolt NSA5031-5-38 Item 2
16 Washer NAS1149D0563K Item 3
16 Nut NAS1726-5E Item 4
(c) Protect the visible edges of the sealant, 06AEB2, with:
Coating-- Flexible
Structure
04QAB2 As required
(d) On the clamps and fasteners which you have installed, apply:
Corrosion
Preventive
Compound-Water
Displacing
12ADB1 As required
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 15
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A310
SERVICE BULLETIN
D. TEST
None
E. CLOSE-UP
(1) Subtask 532136-942-201-001 - Close-up
Work Zones and Access Panels
Zone
 Access/Work location
310
 Access
 Door 313AL
Work location
 Frame 91
Manpower Resources
Skills
 NON SPECIFIC
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Close the access door 313AL.
(c) Remove the access platform(s).
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 16
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A310
SERVICE BULLETIN
**CONF ALL
C
C
FR91
TYPICAL
D
1
2
3
4 C
B
A
D
B
B
B
B
Z310
A
D
2
3
4
1
PROTECT WITH COMPOUND (MAT. NO. 12ADB1)01
02
NOTE:
01
02
CONSIDER THAT THE CLAMPS MUST BE INSTALLED
WITHIN THE CYLINDRICAL AREA ONLY
3.0 mm TO 3.5 mm
(0.118 in TO 0.138 in)
B_SB_532136_6_BAAA_01_03
Figure A-GBAAA - Sheet 01
Installation of the Clamps at the THS Support Struts
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 17
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A310
SERVICE BULLETIN
REPORTING SHEET
TITLE: FUSELAGE - FUSELAGE TAIL SECTION AND TAIL CONE FR80-FR103
- REINFORCE THS SUPPORT STRUTS AT FR91 BY CLAMPS
MODIFICATION No.: 13682D23322
Please complete the appropriate item (A or B):
A - SB WILL BE
 embodied YES/NO (if NO please comment)
If YES, aircraft concer ned (as per SB effectivity by default) and planned dates (month/year) of
embodiment:
B - SB HAS BEEN
 embodied on aircraft:
Operator comments:
From Airline:
Name/Title:
Signature: Date:
If operational documentation is affected (see Paragraph 1.K of this SB): If information is needed prior to
next normal revision or prior to SB embodiment, please indicate required service(s):
Either: Modification Operational Impact (MOI), if available YES/NO
Or : Intermediate revision YES/NO
Important Information:
 This SB will only be incorporated in your maintenance and operational
documentation if this sheet is returned to Airbus and signed by a duly authorised representative. With
the next feasible revision, this will result in
- Updating of maintenance documentation to show pre and post SB data.
- Updating of maintenance and operational documentation to show post SB data after embodiment.
If this SB requires previous or simultaneous accomplishment of other SBs, Airbus shall automatically
include them in the manual revisions. Refer to SIL 00-037 for detailed information.
Please return this completed sheet to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn: SDC32 Technical Data and Documentation Services
F A X :( + 3 3 )56 19 32 80 6
e-mail: sb.reporting@airbus.com
or via your Resident Customer Support Office.
Alternatively, SB lists via letters or fax are also accepted.
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A310
SERVICE BULLETIN
QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin. The reported data
that you provide us will be used to analyse areas of difficulties and to take corrective action to further
improve the quality of our Service Bulletins.
We thank you for the time you have taken in completing this form.
(Please rate on a scale of 1 to 4, with 4 being the highest score)
- Quality rating of this SB 4321
- Quality rating of the Accomplishment Instructions 4321
- Quality rating of the Illustrations 4321
- Is this SB easy to understand ? Y/N
If you have had difficulties in the accomplishment of this SB please quote below the area(s) and give a
short description of the issue.
Planning Material Instructions
X Effectivity X Kit content X Preparation
X Reason X List of Materials Operator Supplied X Mod/Inspection
X Manpower X Industry support X Test
X References X Re-identification X Close-Up
X Publication X Tooling X Illustrations
Comments:
Operator: Date:
Name/Title:
Please return this form to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn : SEM4 Service Bulletins Management
F A X:( 3 3 )56 19 34 25 1
Or via your Resident Customer Support Office.
DATE: Feb 14/14 SERVICE BULLETIN No.: A310-53-2136
REVISION No.: 00 - Feb 14/14 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
