# Airbus Service Bulletin A320-25-1BQG

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 2 ("A320-25-1BQG Rev 02"), 41 pages: PDF https://openairdocs.org/files/sha256/2c/fb/2cfbdaa837bb2327b599747744ceb4ce7668f9558580938d46e77f483a797b58; text https://openairdocs.org/service-documents/airbus/a320-25-1bqg/file/2cfbdaa837bb.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2022-0518, the docket of AD 2022-10-08. Not covered by OpenAirDocs’ CC0 dedication.
- No revision named ("SB_25-1BQG_r01"), 24 pages: PDF https://openairdocs.org/files/sha256/9d/4c/9d4c6b01a9155be558bc280ade961e015be93316f7f3aea6a231a8a4d328d3fc; text https://openairdocs.org/service-documents/airbus/a320-25-1bqg/file/9d4c6b01a915.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2022-0518, the docket of AD 2022-10-08. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A320-25-1BQG
- Latest revision known: A320-25-1BQG, Revision 2 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/a320-25-1bqg

## Text (41 pages)

Revision 2, the newest copy. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2022-0518, the docket of AD 2022-10-08. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 1
CONF ALL
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
 
The content of this document is the property of Airbus. All rights including copyrights are reserved.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
MANDATORY MANDATORY MANDATORY
ATA SYSTEM: 25
TITLE: EQUIPMENT/FURNISHINGS - PASSENGER COMPARTMENT SEATS -
INSPECTION OF PASSENGER SEAT TRACK COVERS
MODIFICATION No.:
None

### Page 2

A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 2
ATA SYSTEM: 25
TITLE: EQUIPMENT/FURNISHINGS - PASSENGER COMPARTMENT SEATS -
INSPECTION OF PASSENGER SEAT TRACK COVERS
REVISION TRANSMITTAL SHEET
This page transmits Revision No. 02 of Service Bulletin No. A320-25-1BQG.
A. ADDITIONAL WORK
No additional work is required by this revision.
B. REASON
Revision No. 02 issued to:
- Add aircraft Manufacturer Serial Number (MSN) 08035 for operator CGH
- Update the accomplishment instructions paragraph, the illustrations and the
inspection report table.
C. CHANGES
CONF 001
SUMMARY
GENERAL OVERVIEW
Fig.SA Sol.AA General Overview Figure updated to:
- Correct the zone information from Z200 to Z230 -
Z260
- The latest illustration standard rules.
PLANNING INFORMATION
APPLICABILITY
Configuration definition Aircraft Added.
Aircraft MSNs 06640, 06674, 06824, 07370, 07701
and 07971 are moved from CONF 001 to new CONF
002 to correct the dimension between the seat
screws.
Configuration definition updated.
MANPOWER
T ask set A320-A-25-XX-1BQG-
01000-93BA-A Inspection of
Passenger Seat Track Covers
Note updated.
REFERENCES
T ask set A320-A-25-XX-1BQG-
01000-93BA-A Inspection of
Passenger Seat Track Covers
AMM reference updated from 24-42-00-861-801 to 24-
42-00-861-001.
TFU reference 25.21.00.018 added.
MATERIAL INFORMATION
MATERIAL APPLICABILITY
Material for task set A320-A-
25-XX-1BQG-01000-93BA-A
Referenced tools and referenced consumables added.

### Page 3

A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 3
Inspection of Passenger Seat
Track Covers
TOOLING
Referenced tools for task set
A320-A-25-XX-1BQG-01000-
93BA-A Inspection of Passenger
Seat Track Covers
AMM reference 24-42-00-861-001 added.
CONSUMABLES
Referenced consumables for
task set A320-A-25-XX-1BQG-
01000-93BA-A Inspection of
Passenger Seat Track Covers
AMM reference 25-21-41-400-001 added.
ACCOMPLISHMENT INSTRUCTIONS
T ask set A320-A-25-XX-1BQG-
01000-93BA-A Inspection of
Passenger Seat Track Covers
Caution and note updated.
 
PREPARATION
A320-A-25-XX-1BQG-
01001-540A-A Job Set-up
Paragraph updated to:
- Remove the skills information
- Correct AMM reference from 24-42-00-861-801 to 24-
42-00-861-001.
PROCEDURE
A320-A-25-XX-1BQG-
01001-346A-A Inspect the
Passenger Seat Installation
T ask updated to:
- Correct the zone information in the metadata table
- Add standard practices.
Fig.BA Sol.AA Distance
between seat attachment
screws
Figure updated to:
- Correct the zone information from Z200 to Z230 -
Z260
- The latest illustration standard rules.
Fig.RB Sol.AA Inspection
Report
Inspection report updated to change the affected
seats series PNs.
A320-A-25-XX-1BQG-
03001-311A-A Inspect the
Seat Track Covers
T ask updated to:
- Correct the zone information in the metadata table
- Add standard practices.
Fig.RB Sol.AA Inspection
Report
Inspection report updated to change the affected
seats series PNs.
A320-A-25-XX-1BQG-
03001-920A-A Replace
the Passenger Seats
(Depending on the
Inspection Result)
T ask updated to:
- Correct the zone information in the metadata table
- Add standard practices.
Fig.RB Sol.AA Inspection
Report
Inspection report updated to change the affected
seats series PNs.
TEST
A320-A-25-XX-1BQG-
01001-340A-A T est
Note added.

### Page 4

A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 4
CLOSE-UP
A320-A-25-XX-1BQG-
01001-740A-A Close-up
Paragraph updated to remove the skills information.
CONF 002
PLANNING INFORMATION
APPLICABILITY
Configuration definition Aircraft MSNs 06640, 06674, 06824, 07370, 07701
and 07971 are moved from CONF 001 to new CONF
002 to correct the dimension between the seat
screws.
CONF and associated data added.
CONF ALL
D. FILING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete
document. Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
E. HISTORY OF PREVIOUS REVISIONS
Revision No. 01 issued to update the aircraft applicability to add MSN 6640, 6674, 6824
and 7370, to update the compliance from “Recommended” to “Mandatory”, to amend the
accomplishment timescale sentence and to update the first caution of the accomplishment
instructions.
F. REVISION SEQUENCE
ORIGINAL: Jul 03/19
REVISION No. : 01 - Oct 21/20
REVISION No. : 02 - Jun 28/21

### Page 5

A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 5
ATA SYSTEM: 25
TITLE: EQUIPMENT/FURNISHINGS - PASSENGER COMPARTMENT SEATS -
INSPECTION OF PASSENGER SEAT TRACK COVERS
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
CONF 001
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 002
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF ALL
B. REASON
(1) History
During an aircraft delivery, passenger seats, Dragonfly type, supplied by Safran Seats
France, have been found with their seat track cover distorted on FWD and AFT seat
fixation area. The root-cause has being identified being an incorrect installation of
the passenger seats into the seat track. Potential deformation induced by inadequate
seat installation can lead to a high pre-load in the front leg of the seats and it can be
assumed that with this pre-load the additional load due to emergency landing cannot
be withstood.
(2) Objective/Action
This Service Bulletin is published to advise all operators of A320 aircraft of the issue
of Ref. SAFRAN SEATS FRANCE (F0465) VSB 31-25-097 which details the inspection of
installed Safran Dragonfly passenger seats and, if damaged, to replace affected seat
track covers.
This Service Bulletin also provides instructions to replace the affected seats in case of
wrong installation.
(3) Advantages
Accomplishment of this Service Bulletin will ensure to address this potential unsafe
condition.

### Page 6

A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 6
(4) Operational/Maintenance Consequences
None
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO
A/C OPERATION
AFFECTED
NO VENDOR SB YES
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD NO
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
NOTE: Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION
CONF 001
No specific aircraft maintenance configuration required.
CONF 002
No specific aircraft maintenance configuration required.
CONF ALL
E. MATERIAL PRICE INFORMATION
CONF 001
(1) Inspection of Passenger Seat Track Covers
(a) T ask set A320-A-25-XX-1BQG-01000-93BA-A Inspection of Passenger Seat Track
Covers
No material
CONF 002
(1) Inspection of Passenger Seat Track Covers
(a) T ask set A320-A-25-XX-1BQG-01000-93BA-A Inspection of Passenger Seat Track
Covers
No material
CONF ALL
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
APJ CGH DKH PGT
G. CONCURRENT REQUIREMENTS
None
H. NATURE OF THE WORK
CONF 001
(1) Inspection of Passenger Seat Track Covers

### Page 7

A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 7
(a) T ask set A320-A-25-XX-1BQG-01000-93BA-A Inspection of Passenger Seat Track
Covers
AIRCRAFT NO
EQUIPMENT YES
CONF 002
(1) Inspection of Passenger Seat Track Covers
(a) T ask set A320-A-25-XX-1BQG-01000-93BA-A Inspection of Passenger Seat Track
Covers
AIRCRAFT NO
EQUIPMENT YES
CONF ALL
I. MANPOWER
CONF 001
(1) Inspection of Passenger Seat Track Covers
(a) T ask set A320-A-25-XX-1BQG-01000-93BA-A Inspection of Passenger Seat Track
Covers
MANPOWER
TOTAL MAN-HOURS 4.50 h
ELAPSED TIME (HOURS) 3.00 h
Additional man-hours related to Vendor SB; refer to:
Inspect the Seat Track Covers Ref. SAFRAN SEATS FRANCE (F0465) VSB 31-
25-097
CONF 002
(1) Inspection of Passenger Seat Track Covers
(a) T ask set A320-A-25-XX-1BQG-01000-93BA-A Inspection of Passenger Seat Track
Covers
MANPOWER
TOTAL MAN-HOURS 4.50 h
ELAPSED TIME (HOURS) 3.00 h
Additional man-hours related to Vendor SB; refer to:
Inspect the Seat Track Covers Ref. SAFRAN SEATS FRANCE (F0465) VSB 31-
25-097

### Page 8

A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
Figure ICN-A320-A-25XX1BQG-A-FAPE3-012RH-A-004-01 Fig.SA Sol.AA SHEET 1/1
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21
General Overview
Page 8
CONF ALL
J. GENERAL OVERVIEW
CONF 001
TYPICAL VIEW
A
INSPECTION
AREA
A
 - Z230 Z260
ICN-A320-A-25XX1BQG-A-FAPE3-012RH-A-004-01

### Page 9

A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
Figure ICN-A320-A-25XX1BQG-A-FAPE3-028C9-A-001-01 Fig.SA Sol.AB SHEET 1/1
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21
General Overview
Page 9
CONF 002
TYPICAL VIEW
A
A
 - Z230 Z260
INSPECTION
AREA
ICN-A320-A-25XX1BQG-A-FAPE3-028C9-A-001-01

### Page 10

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 10
ATA SYSTEM: 25
TITLE: EQUIPMENT/FURNISHINGS - PASSENGER COMPARTMENT SEATS -
INSPECTION OF PASSENGER SEAT TRACK COVERS
CONF ALL
1. PLANNING INFORMATION
A. APPLICABILITY
(1) Models
ON A/C 06640, 06674, 06824, 07116, 07145, 07200, 07370, 07701, 07971, 08035, 08116
320-214
CONF ALL
(2) Applicability by MSN
06640 06674 06824 07116 07145 07200 07370 07701 07971 08035 08116
(3) MSN by configuration
CONF 001
MSN CONFIGURATION
07116 07145 07200 08035 08116 001
CONF 002
MSN CONFIGURATION
06640 06674 06824 07370 07701 07971 002
CONF ALL
(4) Configuration definition
CONF 001
Configuration 001
CONF 001 is applicable for all the aircraft affected by the operators CGH, DKH
and PGT.
CONF 002
Configuration 002
CONF 002 is applicable for all the aircraft affected by the operator APJ.
CONF ALL
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
During an aircraft delivery, passenger seats, Dragonfly type, supplied by Safran Seats
France, have been found with their seat track cover distorted on FWD and AFT seat
fixation area. The root-cause has being identified being an incorrect installation of
the passenger seats into the seat track. Potential deformation induced by inadequate
seat installation can lead to a high pre-load in the front leg of the seats and it can be
assumed that with this pre-load the additional load due to emergency landing cannot
be withstood.

### Page 11

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 11
(2) Objective/Action
This Service Bulletin is published to advise all operators of A320 aircraft of the issue
of Ref. SAFRAN SEATS FRANCE (F0465) VSB 31-25-097 which details the inspection of
installed Safran Dragonfly passenger seats and, if damaged, to replace affected seat
track covers.
This Service Bulletin also provides instructions to replace the affected seats in case of
wrong installation.
(3) Advantages
Accomplishment of this Service Bulletin will ensure to address this potential unsafe
condition.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
T o accomplish this Service Bulletin it is necessary to:
(1) Inspection of Passenger Seat Track Covers
(a) T ask set A320-A-25-XX-1BQG-01000-93BA-A Inspection of Passenger Seat Track
Covers
CONF 001
1 Inspect the Passenger Seat Installation
CONF 002
1 Inspect the Passenger Seat Installation
CONF 001
2 Inspect the Seat Track Covers
CONF 002
2 Inspect the Seat Track Covers
CONF 001
3 Replace the Passenger Seats (Depending on the Inspection Result)
CONF 002
3 Replace the Passenger Seats (Depending on the Inspection Result)
CONF ALL
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory. It is expected that an
Airworthiness Directive (AD) published by the European Union Aviation Safety Agency
(EASA) will be issued to confirm this classification. It is anticipated that the AD will
confirm the thresholds given but reference should be made to the AD for confirmation
of the mandated accomplishment timescale.
Accomplishment of this Service Bulletin must be done within 12 Months from Service
Bulletin issuance.
F. APPROVAL
The technical content of this document is approved under the authority of the Design
Organisation Approval ref. EASA.21J.031.

### Page 12

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 12
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
CONF 001
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Inspection of Passenger Seat Track Covers
(a) T ask set A320-A-25-XX-1BQG-01000-93BA-A Inspection of Passenger Seat Track
Covers
PREPARATION
Job Set-up 0.25 h
PROCEDURE
Inspect the Passenger Seat Installation 0.50 h
Replace the Passenger Seats (Depending on the Inspection
Result)
3.00 h
PREPARATION FOR TEST
None
TEST
T est 0.50 h
CLOSE-UP
Close-up 0.25 h
TOTAL MAN-HOURS 4.50 h
ELAPSED TIME (HOURS) 3.00 h
Additional man-hours related to Vendor SB; refer to:
Inspect the Seat Track Covers Ref. SAFRAN SEATS FRANCE (F0465) VSB 31-
25-097
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
NOTE: The man-hours listed above are calculated for the inspection/
replacement of one passenger seat. The manhours must be multiplied
with the number of seats to be inspected/replaced.
CONF 002
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Inspection of Passenger Seat Track Covers

### Page 13

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 13
(a) T ask set A320-A-25-XX-1BQG-01000-93BA-A Inspection of Passenger Seat Track
Covers
PREPARATION
Job Set-up 0.25 h
PROCEDURE
Inspect the Passenger Seat Installation 0.50 h
Replace the Passenger Seats (Depending on the Inspection
Result)
3.00 h
PREPARATION FOR TEST
None
TEST
T est 0.50 h
CLOSE-UP
Close-up 0.25 h
TOTAL MAN-HOURS 4.50 h
ELAPSED TIME (HOURS) 3.00 h
Additional man-hours related to Vendor SB; refer to:
Inspect the Seat Track Covers Ref. SAFRAN SEATS FRANCE (F0465) VSB 31-
25-097
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
NOTE: The man-hours listed above are calculated for the inspection/
replacement of one passenger seat. The manhours must be multiplied
with the number of seats to be inspected/replaced.
CONF ALL
H. WEIGHT AND BALANCE
Not changed
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
CONF 001
(1) Inspection of Passenger Seat Track Covers
(a) T ask set A320-A-25-XX-1BQG-01000-93BA-A Inspection of Passenger Seat Track
Covers
AIRCRAFT MAINTENANCE MANUAL (AMM)
06-20-00, Page Block 001 T ask 12-34-24-869-002
T ask 23-33-00-710-005 T ask 24-42-00-861-001
T ask 25-21-41-000-001
T ask 25-21-41-400-001

### Page 14

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 14
ELECTRICAL STANDARD PRACTICES MANUAL (ESPM)
20-55-00
IN SERVICE INFORMATION (ISI)
00.00.00179
TECHNICAL FOLLOW UP (TFU)
25.21.00.018
VENDOR SERVICE BULLETIN (VSB)
SAFRAN SEATS FRANCE (F0465) VSB 31-25-097
CONF 002
(1) Inspection of Passenger Seat Track Covers
(a) T ask set A320-A-25-XX-1BQG-01000-93BA-A Inspection of Passenger Seat Track
Covers
AIRCRAFT MAINTENANCE MANUAL (AMM)
06-20-00, Page Block 001 T ask 12-34-24-869-002
T ask 23-33-00-710-005 T ask 24-42-00-861-001
T ask 25-21-41-000-001
T ask 25-21-41-400-001
ELECTRICAL STANDARD PRACTICES MANUAL (ESPM)
20-55-00
IN SERVICE INFORMATION (ISI)
00.00.00179
TECHNICAL FOLLOW UP (TFU)
25.21.00.018
VENDOR SERVICE BULLETIN (VSB)
SAFRAN SEATS FRANCE (F0465) VSB 31-25-097
CONF ALL
K. PUBLICATION AFFECTED
None
L. INDUSTRY SUPPORT INFORMATION
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.

### Page 15

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 15
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
CONF 001
Material for task set A320-A-25-XX-1BQG-01000-93BA-A Inspection of Passenger
Seat Track Covers
MATERIAL QTY SEE NOTES
Referenced tools See SB
Referenced consumables See SB
CONF 002
Material for task set A320-A-25-XX-1BQG-01000-93BA-A Inspection of Passenger
Seat Track Covers
MATERIAL QTY SEE NOTES
Referenced tools See SB
Referenced consumables See SB
CONF ALL
B. TOOLING
CONF 001
Referenced tools for task set A320-A-25-XX-1BQG-01000-93BA-A Inspection of
Passenger Seat Track Covers
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. AMM T ask 24-42-00-861-001
CONF 002
Referenced tools for task set A320-A-25-XX-1BQG-01000-93BA-A Inspection of
Passenger Seat Track Covers
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. AMM T ask 24-42-00-861-001
CONF ALL
C. CONSUMABLES
CONF 001
Referenced consumables for task set A320-A-25-XX-1BQG-01000-93BA-A
Inspection of Passenger Seat Track Covers
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. AMM T ask 25-21-41-400-001
CONF 002
Referenced consumables for task set A320-A-25-XX-1BQG-01000-93BA-A
Inspection of Passenger Seat Track Covers
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. AMM T ask 25-21-41-400-001
CONF ALL
D. LIST OF NEW PARTS
No parts

### Page 16

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 16
E. LIST OF EXISTING PARTS
No parts

### Page 17

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 17
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-25-XX-1BQG-01000-93BA-A (A320-A-25-XX-1BQG-01ZZZ-93BZ-A)
Inspection of Passenger Seat Track Covers
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO A MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESPM 20-55-00.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin is classified mandatory or expected to be classified mandatory by
an Airworthiness Directive (AD). The paragraphs 3.C. and 3.E. in these accomplishment
instructions are Required for Compliance (RC) and must be done to comply with the AD.
T o allow more flexibility, the rule "refer to" and "in accordance with" will apply to these
paragraphs 3.C. and 3.E. Other paragraphs are recommended and may be deviated from,
done as part of other actions or done with accepted methods different from those given
in the Service Bulletin, as long as the RC paragraphs can be done and the aircraft can be
put back into a serviceable condition.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including Required for Compliance paragraph
contained herein, contact AIRBUS for further instructions and approval.
NOTE: The purpose of flowcharts is to supplement the information given in the Procedure and
Compliance paragraphs and not to serve as the primary source for tasks or compliance
times given in this Service Bulletin.
A. TASK SET ASSOCIATED INFORMATION
Task Manpower
CONF 001
TOTAL MAN-HOURS 4.50 h

### Page 18

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 18
CONF 002
TOTAL MAN-HOURS 4.50 h
CONF 001
ELAPSED TIME (HOURS) 3.00 h
CONF 002
ELAPSED TIME (HOURS) 3.00 h
CONF 001
Additional man-hours related to Vendor SB; refer to:
SAFRAN SEATS FRANCE (F0465) VSB 31-25-097
CONF 002
Additional man-hours related to Vendor SB; refer to:
SAFRAN SEATS FRANCE (F0465) VSB 31-25-097
CONF ALL
B. PREPARATION
(1) Task A320-A-25-XX-1BQG-01001-540A-A (A320-A-25-XX-1BQG-01ZZZ-540Z-A)
Job Set-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h
Referenced Information
Manuals/Drawings References/Sheets
AMM T ask 12-34-24-869-002T ask 24-42-00-861-001
Procedure
NOTE: For the basic Aircraft configuration, refer to AMM Chapter “Introduction -
Aircraft status for maintenance" in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to Ref. AMM T ask 12-34-
24-869-002.
(b) Energize the ground service network, refer to Ref. AMM T ask 24-42-00-861-001.
C. PROCEDURE
CONF 001
(1) Task A320-A-25-XX-1BQG-01001-346A-A (A320-A-25-XX-1BQG-01ZZZ-346Z-A)
Inspect the Passenger Seat Installation
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
230
240
250
260

### Page 19

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 19
Manpower/Resources/Skills
Man-hours 0.50 h
Minimum Number of person 1
Elapsed Time 0.50 h
Skills Cabin
Referenced Information
Manuals/Drawings References/Sheets
AMM 06-20-00, Page Block 001
ISI 00.00.00179
VSB SAFRAN SEATS FRANCE (F0465) VSB 31-25-097
Procedure
Ref. Fig.FB Flow Chart
Ref. Fig.BA Distance between seat attachment screws
Ref. Fig.RB Inspection Report
(a) Standard Practices given in this procedure:
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
(b) Inspect the part numbers of all installed passenger seats in accordance with the
part number list given in the Ref. SAFRAN SEATS FRANCE (F0465) VSB 31-25-
097, PLANNING INFORMATION, to identify if seats are affected.
1 If no passenger seat is affected:
a Complete the Inspection Report Sheet, refer to Ref. Fig.RB Sol.AA
SHEET 1 Inspection Report.
b Send the completed Inspection Report Sheet in accordance with Ref.
ISI 00.00.00179.
c Do the Close-up procedure, continue with Ref. T ask A320-A-25-XX-
1BQG-01ZZZ-740Z-A.
d No further action in accordance with this Service Bulletin.
2 If passenger seats are affected, measure the distance between the FWD
and AFT attachment screws, refer to Ref. Fig.BA Sol.AA SHEET 2 Distance
between seat attachment screws.
a If the measurement is within the tolerance, inspect the seat track
covers, continue with Ref. T ask A320-A-25-XX-1BQG-03ZZZ-311Z-A.
b If the measurement is out of the tolerance:
<1> Contact AIRBUS before the passenger seat replacement via
T ech Request, Engineering Domain, ATA 25–21.
<2> Replace the passenger seats, continue with Ref. T ask A320-A-
25-XX-1BQG-03ZZZ-920Z-A.

### Page 20

A318/A319/A320/A321
SERVICE BULLETIN
Figure ICN-A320-A-25XX1BQG-A-FAPE3-01IGX-A-003-01 Fig.FB Sol.AA SHEET 1/1
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21
Flow Chart
Page 20
CONF 001
NOTE:
THE PURPOSE OF FLOWCHARTS IS TO SUPPLEMENT THE
INFORMATION GIVEN IN THE PROCEDURE AND COMPLIANCE
PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE
FOR TASKS OR COMPLIANCE TIMES GIVEN IN
THIS SERVICE BULLETIN.
FOR THE COMPLIANCE TIMES, REFER TO THE
ACCOMPLISHMENT TIMESCALE PARA 1.E.(2).
INSPECT THE PASSENGER SEAT P/N
INSTALLED ON AFFECTED AIRCRAFT
SEAT P/N
IS AFFECTED?
MEASURE THE DISTANCE BETWEEN
SEAT ATTACHMENT SCREWS
MEASUREMENT
WITHIN THE
TOLERANCE?
YES
CONTACT AIRBUS AND
REPLACE THE SEATS
NO
YES
VISUAL INSPECTION
FOR DAMAGE ON
SEAT TRACK COVER
NO
FINDINGS?
REPLACE SEAT TRACK COVER
NO
YES
TO AIRBUS
SEND THE REPORT SHEET
ICN-A320-A-25XX1BQG-A-FAPE3-01IGX-A-003-01

### Page 21

A318/A319/A320/A321
SERVICE BULLETIN
Figure ICN-A320-A-25XX1BQG-A-FAPE3-012RG-A-002-01 Fig.BA Sol.AA SHEET 1/2
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21
Distance between seat attachment screws
Page 21
CONF 001
A
TYPICAL VIEW
A
B
 - Z230 Z260
ICN-A320-A-25XX1BQG-A-FAPE3-012RG-A-002-01

### Page 22

A318/A319/A320/A321
SERVICE BULLETIN
Figure ICN-A320-A-25XX1BQG-A-FAPE3-012SH-A-003-01 Fig.BA Sol.AA SHEET 2/2
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21
Distance between seat attachment screws
Page 22
CONF 001
FWD B
FRONT STUD
REAR STUD
TYPICAL VIEW
508 ± 1.5 mm
(20 ± 0.059 in) 
ICN-A320-A-25XX1BQG-A-FAPE3-012SH-A-003-01

### Page 23

A318/A319/A320/A321
SERVICE BULLETIN
Figure ICN-A320-A-25XX1BQG-A-FAPE3-01IKM-A-005-01 Fig.RB Sol.AA SHEET 1/1
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21
Inspection Report
Page 23
CONF 001
INSPECTION REPORT
SERVICE BULLETIN No. :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A320-25-1BQG
DATE OF INSPECTION :
INSPECTION METHOD : DETAILED
INSPECTION
(RECORD THE SEAT P/N)
AFFECTED SEATS
SERIES PN
3141XXX-XXX
3142XXX-XXX
3155XXX-XXX
3161XXX-XXX
SHEET IN ACCORDANCE WITH ISI 00.00.00179
THE TOLERANCE
MEASUREMENT WITHIN
(RECORD THE SEAT P/N
TOLERANCE
MEASUREMENT OUT OF
SEND THE COMPLETED INSPECTION REPORT
SEAT REPLACED
YES NOAND MEASUREMENT)
ICN-A320-A-25XX1BQG-A-FAPE3-01IKM-A-005-01

### Page 24

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 24
CONF 002
(1) Task A320-A-25-XX-1BQG-01002-346A-A (A320-A-25-XX-1BQG-01ZZZ-346Z-A)
Inspect the Passenger Seat Installation
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
230
240
250
260
Manpower/Resources/Skills
Man-hours 0.50 h
Minimum Number of person 1
Elapsed Time 0.50 h
Skills Cabin
Referenced Information
Manuals/Drawings References/Sheets
AMM 06-20-00, Page Block 001
ISI 00.00.00179
VSB SAFRAN SEATS FRANCE (F0465) VSB 31-25-097
Procedure
Ref. Fig.FB Flow Chart
Ref. Fig.BA Distance between seat attachment screws
Ref. Fig.RB Inspection Report
(a) Standard Practices given in this procedure:
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
(b) Inspect the part numbers of all installed passenger seats in accordance with the
part number list given in the Ref. SAFRAN SEATS FRANCE (F0465) VSB 31-25-
097, PLANNING INFORMATION, to identify if seats are affected.
1 If no passenger seat is affected:
a Complete the Inspection Report Sheet, refer to Ref. Fig.RB Sol.AB
SHEET 1 Inspection Report.
b Send the completed Inspection Report Sheet in accordance with Ref.
ISI 00.00.00179.
c Do the Close-up procedure, continue with Ref. T ask A320-A-25-XX-
1BQG-01ZZZ-740Z-A.
d No further action in accordance with this Service Bulletin.
2 If passenger seats are affected, measure the distance between the FWD
and AFT attachment screws, refer to Ref. Fig.BA Sol.AB SHEET 2 Distance
between seat attachment screws.

### Page 25

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 25
a If the measurement is within the tolerance, inspect the seat track
covers, continue with Ref. T ask A320-A-25-XX-1BQG-03ZZZ-311Z-A.
b If the measurement is out of the tolerance:
<1> Contact AIRBUS before the passenger seat replacement via
T ech Request, Engineering Domain, ATA 25–21.
<2> Replace the passenger seats, continue with Ref. T ask A320-A-
25-XX-1BQG-03ZZZ-920Z-A.

### Page 26

A318/A319/A320/A321
SERVICE BULLETIN
Figure ICN-A320-A-25XX1BQG-A-FAPE3-01IGX-A-003-01 Fig.FB Sol.AA SHEET 1/1
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21
Flow Chart
Page 26
CONF 002
NOTE:
THE PURPOSE OF FLOWCHARTS IS TO SUPPLEMENT THE
INFORMATION GIVEN IN THE PROCEDURE AND COMPLIANCE
PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE
FOR TASKS OR COMPLIANCE TIMES GIVEN IN
THIS SERVICE BULLETIN.
FOR THE COMPLIANCE TIMES, REFER TO THE
ACCOMPLISHMENT TIMESCALE PARA 1.E.(2).
INSPECT THE PASSENGER SEAT P/N
INSTALLED ON AFFECTED AIRCRAFT
SEAT P/N
IS AFFECTED?
MEASURE THE DISTANCE BETWEEN
SEAT ATTACHMENT SCREWS
MEASUREMENT
WITHIN THE
TOLERANCE?
YES
CONTACT AIRBUS AND
REPLACE THE SEATS
NO
YES
VISUAL INSPECTION
FOR DAMAGE ON
SEAT TRACK COVER
NO
FINDINGS?
REPLACE SEAT TRACK COVER
NO
YES
TO AIRBUS
SEND THE REPORT SHEET
ICN-A320-A-25XX1BQG-A-FAPE3-01IGX-A-003-01

### Page 27

A318/A319/A320/A321
SERVICE BULLETIN
Figure ICN-A320-A-25XX1BQG-A-FAPE3-028C7-A-001-01 Fig.BA Sol.AB SHEET 1/2
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21
Distance between seat attachment screws
Page 27
CONF 002
A
TYPICAL VIEW
A
B
 - Z230 Z260
ICN-A320-A-25XX1BQG-A-FAPE3-028C7-A-001-01

### Page 28

A318/A319/A320/A321
SERVICE BULLETIN
Figure ICN-A320-A-25XX1BQG-A-FAPE3-028C8-A-001-01 Fig.BA Sol.AB SHEET 2/2
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21
Distance between seat attachment screws
Page 28
CONF 002
FWD B
FRONT STUD
REAR STUD
TYPICAL VIEW
482.6 ± 1.5 mm
(19 ± 0.059 in) 
ICN-A320-A-25XX1BQG-A-FAPE3-028C8-A-001-01

### Page 29

A318/A319/A320/A321
SERVICE BULLETIN
Figure ICN-A320-A-25XX1BQG-A-FAPE3-028C6-A-001-01 Fig.RB Sol.AB SHEET 1/1
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21
Inspection Report
Page 29
CONF 002
INSPECTION REPORT
SERVICE BULLETIN No. :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A320-25-1BQG
DATE OF INSPECTION :
INSPECTION METHOD : DETAILED
INSPECTION
(RECORD THE SEAT P/N)
AFFECTED SEATS
SERIES PN
3118XXX-XXX
SHEET IN ACCORDANCE WITH ISI 00.00.00179
THE TOLERANCE
MEASUREMENT WITHIN
(RECORD THE SEAT P/N
TOLERANCE
MEASUREMENT OUT OF
SEND THE COMPLETED INSPECTION REPORT
SEAT REPLACED
YES NOAND MEASUREMENT)
ICN-A320-A-25XX1BQG-A-FAPE3-028C6-A-001-01

### Page 30

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 30
CONF 001
(2) Task A320-A-25-XX-1BQG-03001-311A-A (A320-A-25-XX-1BQG-03ZZZ-311Z-A)
Inspect the Seat Track Covers
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
230
240
250
260
Manpower/Resources/Skills
Man-hours
Minimum Number of person
Elapsed Time
Skills Cabin
Referenced Information
Manuals/Drawings References/Sheets
AMM 06-20-00, Page Block 001
ISI 00.00.00179
VSB SAFRAN SEATS FRANCE (F0465) VSB 31-25-097
Procedure
Ref. Fig.RB Inspection Report
(a) Standard Practices given in this procedure:
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
(b) Inspect the seat track covers in accordance with the Ref. SAFRAN SEATS FRANCE
(F0465) VSB 31-25-097.
(c) Complete the Inspection Report Sheet, refer to Ref. Fig.RB Sol.AA SHEET 1
Inspection Report.
(d) Send the completed Inspection Report Sheet in accordance with Ref. ISI
00.00.00179.

### Page 31

A318/A319/A320/A321
SERVICE BULLETIN
Figure ICN-A320-A-25XX1BQG-A-FAPE3-01IKM-A-005-01 Fig.RB Sol.AA SHEET 1/1
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21
Inspection Report
Page 31
CONF 001
INSPECTION REPORT
SERVICE BULLETIN No. :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A320-25-1BQG
DATE OF INSPECTION :
INSPECTION METHOD : DETAILED
INSPECTION
(RECORD THE SEAT P/N)
AFFECTED SEATS
SERIES PN
3141XXX-XXX
3142XXX-XXX
3155XXX-XXX
3161XXX-XXX
SHEET IN ACCORDANCE WITH ISI 00.00.00179
THE TOLERANCE
MEASUREMENT WITHIN
(RECORD THE SEAT P/N
TOLERANCE
MEASUREMENT OUT OF
SEND THE COMPLETED INSPECTION REPORT
SEAT REPLACED
YES NOAND MEASUREMENT)
ICN-A320-A-25XX1BQG-A-FAPE3-01IKM-A-005-01

### Page 32

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 32
CONF 002
(2) Task A320-A-25-XX-1BQG-03002-311A-A (A320-A-25-XX-1BQG-03ZZZ-311Z-A)
Inspect the Seat Track Covers
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
230
240
250
260
Manpower/Resources/Skills
Man-hours
Minimum Number of person
Elapsed Time
Skills Cabin
Referenced Information
Manuals/Drawings References/Sheets
AMM 06-20-00, Page Block 001
ISI 00.00.00179
VSB SAFRAN SEATS FRANCE (F0465) VSB 31-25-097
Procedure
Ref. Fig.RB Inspection Report
(a) Standard Practices given in this procedure:
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
(b) Inspect the seat track covers in accordance with the Ref. SAFRAN SEATS FRANCE
(F0465) VSB 31-25-097.
(c) Complete the Inspection Report Sheet, refer to Ref. Fig.RB Sol.AB SHEET 1
Inspection Report.
(d) Send the completed Inspection Report Sheet in accordance with Ref. ISI
00.00.00179.

### Page 33

A318/A319/A320/A321
SERVICE BULLETIN
Figure ICN-A320-A-25XX1BQG-A-FAPE3-028C6-A-001-01 Fig.RB Sol.AB SHEET 1/1
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21
Inspection Report
Page 33
CONF 002
INSPECTION REPORT
SERVICE BULLETIN No. :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A320-25-1BQG
DATE OF INSPECTION :
INSPECTION METHOD : DETAILED
INSPECTION
(RECORD THE SEAT P/N)
AFFECTED SEATS
SERIES PN
3118XXX-XXX
SHEET IN ACCORDANCE WITH ISI 00.00.00179
THE TOLERANCE
MEASUREMENT WITHIN
(RECORD THE SEAT P/N
TOLERANCE
MEASUREMENT OUT OF
SEND THE COMPLETED INSPECTION REPORT
SEAT REPLACED
YES NOAND MEASUREMENT)
ICN-A320-A-25XX1BQG-A-FAPE3-028C6-A-001-01

### Page 34

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 34
CONF 001
(3) Task A320-A-25-XX-1BQG-03001-920A-A (A320-A-25-XX-1BQG-03ZZZ-920Z-A)
Replace the Passenger Seats (Depending on the Inspection Result)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
230
240
250
260
Manpower/Resources/Skills
Man-hours 3.00 h
Minimum Number of person 2
Elapsed Time 1.50 h
Skills Cabin
Referenced Information
Manuals/Drawings References/Sheets
AMM
06-20-00, Page Block 001
T ask 25-21-41-000-001
T ask 25-21-41-400-001
ISI 00.00.00179
Procedure
Ref. Fig.RB Inspection Report
(a) Standard Practices given in this procedure:
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
(b) Remove the old passenger seat, refer to Ref. AMM T ask 25-21-41-000-001.
(c) Install the new passenger seat, refer to Ref. AMM T ask 25-21-41-400-001.
(d) Complete the Inspection Report Sheet, refer to Ref. Fig.RB Sol.AA SHEET 1
Inspection Report.
(e) Send the completed Inspection Report Sheet in accordance with Ref. ISI
00.00.00179.

### Page 35

A318/A319/A320/A321
SERVICE BULLETIN
Figure ICN-A320-A-25XX1BQG-A-FAPE3-01IKM-A-005-01 Fig.RB Sol.AA SHEET 1/1
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21
Inspection Report
Page 35
CONF 001
INSPECTION REPORT
SERVICE BULLETIN No. :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A320-25-1BQG
DATE OF INSPECTION :
INSPECTION METHOD : DETAILED
INSPECTION
(RECORD THE SEAT P/N)
AFFECTED SEATS
SERIES PN
3141XXX-XXX
3142XXX-XXX
3155XXX-XXX
3161XXX-XXX
SHEET IN ACCORDANCE WITH ISI 00.00.00179
THE TOLERANCE
MEASUREMENT WITHIN
(RECORD THE SEAT P/N
TOLERANCE
MEASUREMENT OUT OF
SEND THE COMPLETED INSPECTION REPORT
SEAT REPLACED
YES NOAND MEASUREMENT)
ICN-A320-A-25XX1BQG-A-FAPE3-01IKM-A-005-01

### Page 36

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 36
CONF 002
(3) Task A320-A-25-XX-1BQG-03002-920A-A (A320-A-25-XX-1BQG-03ZZZ-920Z-A)
Replace the Passenger Seats (Depending on the Inspection Result)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
230
240
250
260
Manpower/Resources/Skills
Man-hours 3.00 h
Minimum Number of person 2
Elapsed Time 1.50 h
Skills Cabin
Referenced Information
Manuals/Drawings References/Sheets
AMM
06-20-00, Page Block 001
T ask 25-21-41-000-001
T ask 25-21-41-400-001
ISI 00.00.00179
Procedure
Ref. Fig.RB Inspection Report
(a) Standard Practices given in this procedure:
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
(b) Remove the old passenger seat, refer to Ref. AMM T ask 25-21-41-000-001.
(c) Install the new passenger seat, refer to Ref. AMM T ask 25-21-41-400-001.
(d) Complete the Inspection Report Sheet, refer to Ref. Fig.RB Sol.AB SHEET 1
Inspection Report.
(e) Send the completed Inspection Report Sheet in accordance with Ref. ISI
00.00.00179.

### Page 37

A318/A319/A320/A321
SERVICE BULLETIN
Figure ICN-A320-A-25XX1BQG-A-FAPE3-028C6-A-001-01 Fig.RB Sol.AB SHEET 1/1
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21
Inspection Report
Page 37
CONF 002
INSPECTION REPORT
SERVICE BULLETIN No. :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A320-25-1BQG
DATE OF INSPECTION :
INSPECTION METHOD : DETAILED
INSPECTION
(RECORD THE SEAT P/N)
AFFECTED SEATS
SERIES PN
3118XXX-XXX
SHEET IN ACCORDANCE WITH ISI 00.00.00179
THE TOLERANCE
MEASUREMENT WITHIN
(RECORD THE SEAT P/N
TOLERANCE
MEASUREMENT OUT OF
SEND THE COMPLETED INSPECTION REPORT
SEAT REPLACED
YES NOAND MEASUREMENT)
ICN-A320-A-25XX1BQG-A-FAPE3-028C6-A-001-01

### Page 38

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 38
CONF ALL
D. PREPARATION FOR TEST
None
E. TEST
(1) Task A320-A-25-XX-1BQG-01001-340A-A (A320-A-25-XX-1BQG-01ZZZ-340Z-A)
Test
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.50 h
Minimum Number of person 1
Elapsed Time 0.50 h
Skills Cabin
Referenced Information
Manuals/Drawings References/Sheets
AMM T ask 23-33-00-710-005T ask 25-21-41-400-001
Procedure
(a) If passenger seats have been replaced, do the subsequent tests on each
replaced seat:
1 Do the test of the mechanical operating functions, refer to Ref. AMM T ask
25-21-41-400-001.
2 Do the operational test of the integrated In-Flight Entertainment (IFE)
System, refer to Ref. AMM T ask 23-33-00-710-005.
NOTE: If the IFE is not installed, test is not necessary.
F. CLOSE-UP
(1) Task A320-A-25-XX-1BQG-01001-740A-A (A320-A-25-XX-1BQG-01ZZZ-740Z-A)
Close-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h
Procedure
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Put the aircraft back to its initial configuration.
G. ADMINISTRATIVE
(1) Task A320-A-25-XX-1BQG-01001-90AA-A (A320-A-25-XX-1BQG-01ZZZ-90AZ-A)
Administrative
Procedure

### Page 39

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 39
Confirm in the applicable aircraft records that you have completed all the work defined
in this Service Bulletin task set as required.

### Page 40

A318/A319/A320/A321
SERVICE BULLETIN
APPENDIX
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 40
APPENDIX
A. REPORTING SHEET
TITLE: EQUIPMENT/FURNISHINGS - PASSENGER COMPARTMENT SEATS -
INSPECTION OF PASSENGER SEAT TRACK COVERS
MODIFICATION No.: None
(1) SB Reporting status
This Service Bulletin will only be incorporated into affected customized Maintenance
and Flight Operations Products if it is duly reported to Airbus.
(2) GENERAL information
The SB Reporting policy is published in ISI 00.00.00135. This document provides
information regarding: the SB Reporting means and benefits, the update of
customized Maintenance Products and customized Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations
Products" for further information on the update of affected Flight Operations Products.
(3) SB Reporting procedure
Standard practice to report SB is to use the online reporting application on
AirbusWorld.
Refer to ISI 00.00.00179:
- For complete information on reporting means to Airbus, Question 2 "What are
the standard practices for SB Reporting?"
- If this SB requires previous or simultaneous accomplishment of other SBs,
Question 3 "What about the reporting of prerequisite Service Bulletins?"
NOTE: ISI 00.00.00179 covers all the frequently asked questions about SB Reporting.
It is revised on a regular basis.

### Page 41

A318/A319/A320/A321
SERVICE BULLETIN
APPENDIX
REV 00 Jul 03/19 A320-25-1BQG
REV 02 Jun 28/21 Page 41
B. QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin.
The reported data that you provide us will be used to analyse areas of difficulties and to
take corrective action to further improve the quality of our Service Bulletin.
We thank you for the time you have taken in completing this form.
Quality rating of this SB 4 3 2 1
Quality rating of the Accomplishment Instructions 4 3 2 1
Quality rating of the Illustrations 4 3 2 1
Is this SB easy to understand ? Y / N
NOTE: Please rate on a scale of 1 to 4, with 4 being the highest score
If you have difficulties in the accomplishment of this SB please quote below the area(s) and
give a short description of the issue.
Planning Material Instructions
X Applicability X T ooling X Preparation
X Reason X List of Materials
Operator Supplied
X Mod/Inspection
X Manpower X Kit content X T est
X References X Re-identification X Close-up
X Publication X Illustrations
X Industry Support
Comments :
Operator : Date :
Name/Title
Please return this form to :
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
Or via your Resident Customer Support Office.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
