# Airbus Service Bulletin A320-25-1BQH

Copy: Revision 1 ("A320-25-1BQH Rev 01"), 25 pages: PDF https://openairdocs.org/files/sha256/f1/b4/f1b45946ffdf9fc7aa1f986cc176fda3c376be05a661dad10b3a25c0293f7ead; text https://openairdocs.org/service-documents/airbus/a320-25-1bqh/file/f1b45946ffdf.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2022-0518, the docket of AD 2022-10-08. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A320-25-1BQH
- Latest revision known: A320-25-1BQH, Revision 1 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/a320-25-1bqh

## Text (25 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2022-0518, the docket of AD 2022-10-08. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20 Page 1
CONF ALL
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
 
The content of this document is the property of Airbus. All rights including copyrights are reserved.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
MANDATORY MANDATORY MANDATORY
ATA SYSTEM: 25
TITLE: EQUIPMENT/FURNISHINGS - PASSENGER COMPARTMENT -
INSPECTION OF PASSENGER SEAT TRACK COVERS
MODIFICATION No.:
None

### Page 2

A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20 Page 2
ATA SYSTEM: 25
TITLE: EQUIPMENT/FURNISHINGS - PASSENGER COMPARTMENT -
INSPECTION OF PASSENGER SEAT TRACK COVERS
REVISION TRANSMITTAL SHEET
This page transmits Revision No. 01 of Service Bulletin No. A320-25-1BQH.
A. ADDITIONAL WORK
No additional work is required by this revision.
B. REASON
Revision No. 01 issued to update the Service Bulletin applicability, to update the compliance
from “Recommended” to “Mandatory”, to amend the accomplishment timescale sentence
and to update the first caution of the accomplishment instructions.
C. CHANGES
SUMMARY
APPLICABILITY Applicability updated
PLANNING INFORMATION
APPLICABILITY Applicability updated
COMPLIANCE
Classification Classification amended from Recommended to
Mandatory
Accomplishment Timescale Amended due to the new SB classification and AD
issueance
APPROVAL Approval sentence updated according to new data
from EASA
ACCOMPLISHMENT INSTRUCTIONS
T ask set A320-A-25-XX-1BQH-
01000-93BA-A Inspection of
Passenger Seat Track Covers
CAUTION amended:
"A" deleted from "A MAINTENANCE WORK"
"ESP" deleted before ESPM reference
D. FILING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete
document. Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
E. HISTORY OF PREVIOUS REVISIONS
No previous revision
F. REVISION SEQUENCE
ORIGINAL: Jul 03/19
REVISION No. : 01 - Oct 21/20

### Page 3

A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20 Page 3
ATA SYSTEM: 25
TITLE: EQUIPMENT/FURNISHINGS - PASSENGER COMPARTMENT -
INSPECTION OF PASSENGER SEAT TRACK COVERS
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
B. REASON
(1) History
During an aircraft delivery, passenger seats, Dragonfly type, supplied by Safran Seats
France, have been found with their seat track cover distorted on FWD and AFT seat
fixation area. The root-cause has being identified being an incorrect installation of
the passenger seats into the seat track. Potential deformation induced by inadequate
seat installation can lead to a high pre-load in the front leg of the seats and it can be
assumed that with this pre-load the additional load due to emergency landing cannot
be withstood.
(2) Objective/Action
This Service Bulletin is published to advise all operators of A320 aircraft of the issue
of Ref. SAFRAN SEATS FRANCE (F0465) VSB 31-25-097 which details the inspection of
installed Safran Dragonfly passengers seats and, if damaged, to replace affected seat
track covers.
This Service Bulletin also provides instructions to replace the affected seats in case of
wrong installation.
(3) Advantages
Accomplishment of this Service Bulletin will ensure to address this potential unsafe
condition.
(4) Operational/Maintenance Consequences
None
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO
A/C OPERATION
AFFECTED
NO VENDOR SB YES
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD NO
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO

### Page 4

A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20 Page 4
EVALUATION TABLE
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
NOTE: Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION
No specific aircraft maintenance configuration required.
E. MATERIAL PRICE INFORMATION
(1) Inspection of Passenger Seat Track Covers
(a) T ask set A320-A-25-XX-1BQH-01000-93BA-A Inspection of Passenger Seat Track
Covers
No material
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
CHB GCR GOW HKE IGO PGT SBI
G. CONCURRENT REQUIREMENTS
None
H. NATURE OF THE WORK
(1) Inspection of Passenger Seat Track Covers
(a) T ask set A320-A-25-XX-1BQH-01000-93BA-A Inspection of Passenger Seat Track
Covers
AIRCRAFT NO
EQUIPMENT YES
I. MANPOWER
(1) Inspection of Passenger Seat Track Covers
(a) T ask set A320-A-25-XX-1BQH-01000-93BA-A Inspection of Passenger Seat Track
Covers
MANPOWER
TOTAL MAN-HOURS 4.50 h
ELAPSED TIME (HOURS) 3.00 h
Additional man-hours related to Vendor SB; refer to:
Inspect the Seat Track Covers Ref. SAFRAN SEATS FRANCE (F0465) VSB 31-
25-097

### Page 5

A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
Figure ICN-A320-A-25XX1BQH-A-FAPE3-012SC-A-002-01 SHEET 1/1
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20
General overview
Page 5
J. GENERAL OVERVIEW
CONF ALL
TYPICAL 
A
INSPECTION
AREA
A
Z200
ICN-A320-A-25XX1BQH-A-FAPE3-012SC-A-002-01

### Page 6

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20 Page 6
ATA SYSTEM: 25
TITLE: EQUIPMENT/FURNISHINGS - PASSENGER COMPARTMENT -
INSPECTION OF PASSENGER SEAT TRACK COVERS
1. PLANNING INFORMATION
A. APPLICABILITY
(1) Models
ON A/C 07147, 07162, 07321, 07359, 07380, 07399, 07429, 07703, 07786, 07990, 08020,
08048
320-251N
ON A/C 06720, 06799, 06819, 06829, 06849, 06860, 06868, 06904, 06914, 06946, 06952,
06967, 07033, 07047, 07053, 07074, 07083, 07172, 07192, 07205, 07209, 07329, 07331,
07333, 07391, 07396, 07504, 07507, 07510, 07512, 07517, 07533, 07547, 07563, 07571,
07594, 07618, 07629, 07731, 07737, 07751, 07753, 07795, 07813, 07914
320-271N
CONF ALL
(2) Applicability by MSN
06720 06799 06819 06829 06849 06860 06868 06904 06914 06946 06952 06967
07033 07047 07053 07074 07083 07147 07162 07172 07192 07205 07209 07321
07329 07331 07333 07359 07380 07391 07396 07399 07429 07504 07507 07510
07512 07517 07533 07547 07563 07571 07594 07618 07629 07703 07731 07737
07751 07753 07786 07795 07813 07914 07990 08020 08048
(3) MSN by configuration
MSN CONFIGURATION
06720 06799 06819 06829 06849 06860 06868 06904 06914
06946 06952 06967 07033 07047 07053 07074 07083 07147
07162 07172 07192 07205 07209 07321 07329 07331 07333
07359 07380 07391 07396 07399 07429 07504 07507 07510
07512 07517 07533 07547 07563 07571 07594 07618 07629
07703 07731 07737 07751 07753 07786 07795 07813 07914
07990 08020 08048
001
(4) Configuration definition
Configuration 001
Config 001 is applicable for all the aircraft affected by this Service Bulletin as a
standard configuration.
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
During an aircraft delivery, passenger seats, Dragonfly type, supplied by Safran Seats
France, have been found with their seat track cover distorted on FWD and AFT seat
fixation area. The root-cause has being identified being an incorrect installation of
the passenger seats into the seat track. Potential deformation induced by inadequate
seat installation can lead to a high pre-load in the front leg of the seats and it can be

### Page 7

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20 Page 7
assumed that with this pre-load the additional load due to emergency landing cannot
be withstood.
(2) Objective/Action
This Service Bulletin is published to advise all operators of A320 aircraft of the issue
of Ref. SAFRAN SEATS FRANCE (F0465) VSB 31-25-097 which details the inspection of
installed Safran Dragonfly passengers seats and, if damaged, to replace affected seat
track covers.
This Service Bulletin also provides instructions to replace the affected seats in case of
wrong installation.
(3) Advantages
Accomplishment of this Service Bulletin will ensure to address this potential unsafe
condition.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
T o accomplish this Service Bulletin it is necessary to:
(1) Inspection of Passenger Seat Track Covers
(a) T ask set A320-A-25-XX-1BQH-01000-93BA-A Inspection of Passenger Seat Track
Covers
1 Inspect the Passenger Seat Installation
2 Inspect the Seat Track Covers
3 Replace the Passenger Seats (Depending on the Inspection Result)
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory. It is expected that an
Airworthiness Directive (AD) published by the European Union Aviation Safety Agency
(EASA) will be issued to confirm this classification. It is anticipated that the AD will
confirm the thresholds given but reference should be made to the AD for confirmation
of the mandated accomplishment timescale.
Accomplishment of this Service Bulletin must be done within 12 Months from Service
Bulletin issuance.
F. APPROVAL
The technical content of this document is approved under the authority of the Design
Organisation Approval ref. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not

### Page 8

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20 Page 8
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Inspection of Passenger Seat Track Covers
(a) T ask set A320-A-25-XX-1BQH-01000-93BA-A Inspection of Passenger Seat Track
Covers
PREPARATION
Job Set-up 0.25 h
PROCEDURE
Inspect the Passenger Seat Installation 0.50 h
Replace the Passenger Seats (Depending on the Inspection
Result)
3.00 h
PREPARATION FOR TEST
None
TEST
T est 0.50 h
CLOSE-UP
Cllose-up 0.25 h
TOTAL MAN-HOURS 4.50 h
ELAPSED TIME (HOURS) 3.00 h
Additional man-hours related to Vendor SB; refer to:
Inspect the Seat Track Covers Ref. SAFRAN SEATS FRANCE (F0465) VSB 31-
25-097
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
NOTE: The manhours listed above are calculated for the inspection/
replacement of one passenger seat. The manhours must be multiplied
with the number of seats to be inspected/replaced.
H. WEIGHT AND BALANCE
Not changed
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
(1) Inspection of Passenger Seat Track Covers
(a) T ask set A320-A-25-XX-1BQH-01000-93BA-A Inspection of Passenger Seat Track
Covers
AIRCRAFT MAINTENANCE MANUAL (AMM)
06-20-00, Page Block 001 T ask 12-34-24-869-002
T ask 23-33-00-710-005 T ask 24-42-00-861-801
T ask 25-21-41-000-001
T ask 25-21-41-400-001

### Page 9

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20 Page 9
ELECTRICAL STANDARD PRACTICES MANUAL (ESPM)
20-55-00
IN SERVICE INFORMATION (ISI)
00.00.00179
VENDOR SERVICE BULLETIN (VSB)
SAFRAN SEATS FRANCE (F0465) VSB 31-25-097
K. PUBLICATION AFFECTED
None
L. INDUSTRY SUPPORT INFORMATION
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.

### Page 10

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20 Page 10
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
No material for task set A320-A-25-XX-1BQH-01000-93BA-A Inspection of
Passenger Seat Track Covers
B. TOOLING
No tools
C. CONSUMABLES
No consumables
D. LIST OF NEW PARTS
No parts
E. LIST OF EXISTING PARTS
No parts

### Page 11

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20 Page 11
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-25-XX-1BQH-01000-93BA-A (A320-A-25-XX-1BQH-01ZZZ-93BZ-A)
Inspection of Passenger Seat Track Covers
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESPM 20-55-00.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, contact AIRBUS for further instructions and
approval.
NOTE: The purpose of flowcharts is to supplement the information given in the Procedure and
Compliance paragraphs and not to serve as the primary source for tasks or compliance
times given in this Service Bulletin.
A. TASK SET ASSOCIATED INFORMATION
Task Manpower
TOTAL MAN-HOURS 4.50 h
ELAPSED TIME (HOURS) 3.00 h
Additional man-hours related to Vendor SB; refer to:
SAFRAN SEATS FRANCE (F0465) VSB 31-25-097
B. PREPARATION
(1) Task A320-A-25-XX-1BQH-01001-540A-A (A320-A-25-XX-1BQH-01ZZZ-540Z-A)
Job Set-up

### Page 12

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20 Page 12
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h
Skills Utility
Referenced Information
Manuals/Drawings References/Sheets
AMM
06-20-00, Page Block 001
T ask 12-34-24-869-002
T ask 24-42-00-861-801
Procedure
NOTE: For the basic Aircraft configuration, refer to AMM Chapter “Introduction -
Aircraft status for maintenance" in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to Ref. AMM T ask 12-34-
24-869-002.
(b) Energize the ground service network, refer to Ref. AMM T ask 24-42-00-861-801.
(c) For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
C. PROCEDURE
(1) Task A320-A-25-XX-1BQH-01001-346A-A (A320-A-25-XX-1BQH-01ZZZ-346Z-A)
Inspect the Passenger Seat Installation
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
200
Manpower/Resources/Skills
Man-hours 0.50 h
Minimum Number of person 1
Elapsed Time 0.50 h
Skills Cabin
Referenced Information
Manuals/Drawings References/Sheets
ISI 00.00.00179
VSB SAFRAN SEATS FRANCE (F0465) VSB 31-25-097
Procedure
Ref. Fig. Flow Chart
Ref. Fig. Distance between Seat Attachment Screws
Ref. Fig. Inspection Report

### Page 13

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20 Page 13
(a) Inspect the part numbers of all installed passenger seats in accordance with the
part number list given in the Ref. SAFRAN SEATS FRANCE (F0465) VSB 31-25-
097, PLANNING INFORMATION, to identify if seats are affected.
1 If no passenger seat is affected:
a Complete the Inspection Report Sheet, refer to Ref. Fig. Inspection
Report SHEET 1.
b Send the completed Inspection Report sheet in accordance with Ref.
ISI 00.00.00179.
c Do the Close-up procedure, continue with Ref. T ask A320-A-25-XX-
1BQH-01ZZZ-740Z-A.
d No further action in accordance with this Service Bulletin.
2 If passenger seats are affected, measure the distance between the FWD
and AFT attachment screws, refer to Ref. Fig. Distance between Seat
Attachment Screws SHEET 2.
a If the measurement is within the tolerance, inspect the seat track
covers, continue with Ref. T ask A320-A-25-XX-1BQH-03ZZZ-311Z-A.
b If the measurement is out of the tolerance:
<1> Contact AIRBUS before the passenger seat replacement via
T ech Request, Engineering Domain, ATA 25–21.
<2> Replace the passenger seats, continue with Ref. T ask A320-A-
25-XX-1BQH-02ZZZ-920Z-A.

### Page 14

A318/A319/A320/A321
SERVICE BULLETIN
Figure ICN-A320-A-25XX1BQH-A-FAPE3-012SD-A-003-01 SHEET 1/1
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20
Flow Chart
Page 14
CONF ALL
NOTE:
THE PURPOSE OF FLOWCHARTS IS TO SUPPLEMENT THE
INFORMATION GIVEN IN THE PROCEDURE AND COMPLIANCE
PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE
FOR TASKS OR COMPLIANCE TIMES GIVEN IN
THIS SERVICE BULLETIN.
FOR THE COMPLIANCE TIMES, REFER TO THE
ACCOMPLISHMENT TIMESCALE PARA 1.E.(2).
INSPECT THE PASSENGER SEAT P/N
INSTALLED ON AFFECTED AIRCRAFT
SEAT P/N
IS AFFECTED?
MEASURE THE DISTANCE BETWEEN
SEAT ATTACHMENT SCREWS
MEASUREMENT
WITHIN THE
TOLERANCE?
YES
CONTACT AIRBUS AND
REPLACE THE SEATS
NO
YES
VISUAL INSPECTION
FOR DAMAGE ON
SEAT TRACK COVER
NO
FINDINGS?
REPLACE SEAT TRACK COVER
NO
YES
TO AIRBUS
SEND THE REPORT SHEET
ICN-A320-A-25XX1BQH-A-FAPE3-012SD-A-003-01

### Page 15

A318/A319/A320/A321
SERVICE BULLETIN
Figure ICN-A320-A-25XX1BQH-A-FAPE3-012SE-A-001-01 SHEET 1/2
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20
Distance between Seat Attachment Screws
Page 15
CONF ALL
TYPICAL 
B
B
A
C
C
A
Z200
ICN-A320-A-25XX1BQH-A-FAPE3-012SE-A-001-01

### Page 16

A318/A319/A320/A321
SERVICE BULLETIN
Figure ICN-A320-A-25XX1BQH-A-FAPE3-012SF-A-001-01 SHEET 2/2
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20
Distance between Seat Attachment Screws
Page 16
CONF ALL
508 mm ±1.5
(20 in ±0.059)
B
C
D
D
ICN-A320-A-25XX1BQH-A-FAPE3-012SF-A-001-01

### Page 17

A318/A319/A320/A321
SERVICE BULLETIN
Figure ICN-A320-A-25XX1BQH-A-FAPE3-01IMT-A-002-01 SHEET 1/1
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20
Inspection Report
Page 17
CONF ALL
INSPECTION REPORT
SERVICE BULLETIN No. :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A320-25-1BQH
DATE OF INSPECTION :
INSPECTION METHOD : DETAILED
INSPECTION
SHEET IN ACCORDANCE WITH ISI 00.00.00179
SEND THE COMPLETED INSPECTION REPORT
(RECORD THE SEAT P/N)
AFFECTED SEATS
SERIES PN
3118XXX-XXX
3133XXX-XXX
3137XXX-XXX
3142XXX-XXX
3146XXX-XXX
3153XXX-XXX
3155XXX-XXX
3161XXX-XXX
THE TOLERANCE
MEASUREMENT WITHIN
(RECORD THE SEAT P/N
TOLERANCE
MEASUREMENT OUT OF SEAT REPLACED
YES NOAND MEASUREMENT)
ICN-A320-A-25XX1BQH-A-FAPE3-01IMT-A-002-01

### Page 18

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20 Page 18
(2) Task A320-A-25-XX-1BQH-03001-311A-A (A320-A-25-XX-1BQH-03ZZZ-311Z-A)
Inspect the Seat Track Covers
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
200
Manpower/Resources/Skills
Man-hours
Minimum Number of person
Elapsed Time
Skills Cabin
Referenced Information
Manuals/Drawings References/Sheets
ISI 00.00.00179
VSB SAFRAN SEATS FRANCE (F0465) VSB 31-25-097
Procedure
Ref. Fig. Inspection Report
(a) Inspect the seat track covers in accordance with the Ref. SAFRAN SEATS FRANCE
(F0465) VSB 31-25-097.
(b) Complete the Inspection Report Sheet, refer to Ref. Fig. Inspection Report SHEET
1.
(c) Send the completed Inspection Report Sheet in accordance with Ref. ISI
00.00.00179.

### Page 19

A318/A319/A320/A321
SERVICE BULLETIN
Figure ICN-A320-A-25XX1BQH-A-FAPE3-01IMT-A-002-01 SHEET 1/1
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20
Inspection Report
Page 19
CONF ALL
INSPECTION REPORT
SERVICE BULLETIN No. :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A320-25-1BQH
DATE OF INSPECTION :
INSPECTION METHOD : DETAILED
INSPECTION
SHEET IN ACCORDANCE WITH ISI 00.00.00179
SEND THE COMPLETED INSPECTION REPORT
(RECORD THE SEAT P/N)
AFFECTED SEATS
SERIES PN
3118XXX-XXX
3133XXX-XXX
3137XXX-XXX
3142XXX-XXX
3146XXX-XXX
3153XXX-XXX
3155XXX-XXX
3161XXX-XXX
THE TOLERANCE
MEASUREMENT WITHIN
(RECORD THE SEAT P/N
TOLERANCE
MEASUREMENT OUT OF SEAT REPLACED
YES NOAND MEASUREMENT)
ICN-A320-A-25XX1BQH-A-FAPE3-01IMT-A-002-01

### Page 20

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20 Page 20
(3) Task A320-A-25-XX-1BQH-02001-920A-A (A320-A-25-XX-1BQH-02ZZZ-920Z-A)
Replace the Passenger Seats (Depending on the Inspection Result)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
200
Manpower/Resources/Skills
Man-hours 3.00 h
Minimum Number of person 2
Elapsed Time 1.50 h
Skills Cabin
Referenced Information
Manuals/Drawings References/Sheets
AMM T ask 25-21-41-000-001T ask 25-21-41-400-001
ISI 00.00.00179
Procedure
Ref. Fig. Inspection Report
(a) Remove the passenger seat, refer to Ref. AMM T ask 25-21-41-000-001.
(b) Install the passenger seat, refer to Ref. AMM T ask 25-21-41-400-001.
(c) Complete the Inspection Report Sheet, refer to Ref. Fig. Inspection Report SHEET
1.
(d) Send the completed Inspection Report Sheet in accordance with Ref. ISI
00.00.00179.

### Page 21

A318/A319/A320/A321
SERVICE BULLETIN
Figure ICN-A320-A-25XX1BQH-A-FAPE3-01IMT-A-002-01 SHEET 1/1
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20
Inspection Report
Page 21
CONF ALL
INSPECTION REPORT
SERVICE BULLETIN No. :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A320-25-1BQH
DATE OF INSPECTION :
INSPECTION METHOD : DETAILED
INSPECTION
SHEET IN ACCORDANCE WITH ISI 00.00.00179
SEND THE COMPLETED INSPECTION REPORT
(RECORD THE SEAT P/N)
AFFECTED SEATS
SERIES PN
3118XXX-XXX
3133XXX-XXX
3137XXX-XXX
3142XXX-XXX
3146XXX-XXX
3153XXX-XXX
3155XXX-XXX
3161XXX-XXX
THE TOLERANCE
MEASUREMENT WITHIN
(RECORD THE SEAT P/N
TOLERANCE
MEASUREMENT OUT OF SEAT REPLACED
YES NOAND MEASUREMENT)
ICN-A320-A-25XX1BQH-A-FAPE3-01IMT-A-002-01

### Page 22

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20 Page 22
D. PREPARATION FOR TEST
None
E. TEST
(1) Task A320-A-25-XX-1BQH-01001-340A-A (A320-A-25-XX-1BQH-01ZZZ-340Z-A)
Test
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
200
Manpower/Resources/Skills
Man-hours 0.50 h
Minimum Number of person 1
Elapsed Time 0.50 h
Skills Cabin
Referenced Information
Manuals/Drawings References/Sheets
AMM T ask 23-33-00-710-005T ask 25-21-41-400-001
Procedure
(a) If passenger seats have been replaced, do the subsequent tests on each
replaced seat:
1 Do the test of the mechanical operating functions, refer to Ref. AMM T ask
25-21-41-400-001.
2 Do the operational test of the integrated In-Flight Entertainment (IFE)
System, refer to Ref. AMM T ask 23-33-00-710-005.
F. CLOSE-UP
(1) Task A320-A-25-XX-1BQH-01001-740A-A (A320-A-25-XX-1BQH-01ZZZ-740Z-A)
Cllose-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h
Skills Utility
Procedure
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Put the aircraft back to its initial configuration.
G. ADMINISTRATIVE
(1) Task A320-A-25-XX-1BQH-01001-90AA-A (A320-A-25-XX-1BQH-01ZZZ-90AZ-A)
Administrative

### Page 23

A318/A319/A320/A321
SERVICE BULLETIN
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20 Page 23
Procedure
Confirm in the applicable aircraft records that you have completed all the work defined
in this Service Bulletin task set as required.

### Page 24

A318/A319/A320/A321
SERVICE BULLETIN
APPENDIX
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20 Page 24
APPENDIX
A. REPORTING SHEET
TITLE: EQUIPMENT/FURNISHINGS - PASSENGER COMPARTMENT - INSPECTION
OF PASSENGER SEAT TRACK COVERS
MODIFICATION No.: None
(1) SB Reporting status
This Service Bulletin will only be incorporated into affected customized Maintenance
and Flight Operations Products if it is duly reported to Airbus.
(2) GENERAL information
The SB Reporting policy is published in ISI 00.00.00135. This document provides
information regarding: the SB Reporting means and benefits, the update of
customized Maintenance Products and customized Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations
Products" for further information on the update of affected Flight Operations Products.
(3) SB Reporting procedure
Standard practice to report SB is to use the online reporting application on
AirbusWorld.
Refer to ISI 00.00.00179:
- For complete information on reporting means to Airbus, Question 2 "What are
the standard practices for SB Reporting?"
- If this SB requires previous or simultaneous accomplishment of other SBs,
Question 3 "What about the reporting of prerequisite Service Bulletins?"
NOTE: ISI 00.00.00179 covers all the frequently asked questions about SB Reporting.
It is revised on a regular basis.

### Page 25

A318/A319/A320/A321
SERVICE BULLETIN
APPENDIX
REV 00 Jul 03/19 A320-25-1BQH
REV 01 Oct 21/20 Page 25
B. QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin.
The reported data that you provide us will be used to analyse areas of difficulties and to
take corrective action to further improve the quality of our Service Bulletin.
We thank you for the time you have taken in completing this form.
Quality rating of this SB 4 3 2 1
Quality rating of the Accomplishment Instructions 4 3 2 1
Quality rating of the Illustrations 4 3 2 1
Is this SB easy to understand ? Y / N
NOTE: Please rate on a scale of 1 to 4, with 4 being the highest score
If you have difficulties in the accomplishment of this SB please quote below the area(s) and
give a short description of the issue.
Planning Material Instructions
X Applicability X T ooling X Preparation
X Reason X List of Materials
Operator Supplied
X Mod/Inspection
X Manpower X Kit content X T est
X References X Re-identification X Close-up
X Publication X Illustrations
X Industry Support
Comments :
Operator : Date :
Name/Title
Please return this form to :
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
Or via your Resident Customer Support Office.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
