# Airbus Service Bulletin A320-71-1073: Revision 01

- Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-1068, the docket of AD 2019-11-09. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Airbus Service Bulletin A320-71-1073](https://openairdocs.org/service-documents/airbus/a320-71-1073.md)
- Title as filed: A320-71-1073
- Pages: 32
- PDF: https://openairdocs.org/files/sha256/bf/2e/bf2ecb8e6f64ebe7f8f375fe1c00a2429059a4a161160e9ce94c6990a1a77bc8
- Page: https://openairdocs.org/service-documents/airbus/a320-71-1073/file/bf2ecb8e6f64

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 71
TITLE: POWER PLANT - MOUNTS - INSPECTION OF THE FORWARD ENGINE
TITANIUM CROSSBEAM ON CFM56-5A ENGINES
**CONF ALL
MODIFICATIONS
None
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
The forward engine titanium crossbeam on CFM56-5A engine powered on A319 and A320 aircraft may
surpass the fatigue life limits on Part Number (PN) 238-0204-501.
Further investigations have confirmed the requirement for the replacement of the titanium crossbeam
before reaching its fatigue life limit of 64000 Flight Cycle (FC).
This Inspection Service Bulletin is published to advise operators of CFM56-5A engine powered A319
and A320 aircraft of the issue of UTAS Service Bulletin No. RA32071-168.
This Inspection Service Bulletin addresses the mandated inspection of titanium crossbeam (PN
238-0204-501) fitted only on CFM56-5A engines prior to its life limit.
The accomplishment of this Service Bulletin will enable the identification of the transferable component
PN 238-0204-501.
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 ETOPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 YES
NOTE
 (1)
: Service Bulletin must be accomplished.
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
MATERIAL PRICE INFORMATION
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Equipment BFEA01
 1
 See SB
 Crossbeam assembly
EFFECTIVITY
This Service Bulletin is applicable to this (these) operator(s) :
11X 13Y 31V 60U 61W 69X 73W 76W 82U 85T 89Q AAF ACA
AFR AHY ANA ANR ART B2V CFG DAL DAT DLH ETD F2I FRN
GWI I2L IND IRA IZG JAV JBW KAC LBN LUR MLD NVD RIH
RYW SDM SOL SWM TAR TDR WRC
CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU
 71.21.00.054
OEB
 None
AOT
 None
SIL
 None
ISI
 00.05.00002
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 None
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 NO
MANPOWER
Task 711073-832-801-001: Inspection
TOTAL MANHOURS
 8.00
ELAPSED TIME (HOURS)
 0.50
Additional manhours relat ed to Vendor SB; refer to:
Do the Detail Inspection (DET) of the FWD Engine Mount
Titanium Crossbeam on Engine 1
UTAS Service Bulletin No.
RA32071-168
Do the DET of the FWD Engine Mount Titanium
Crossbeam on Engine 2
UTAS Service Bulletin No.
RA32071-168
APPENDICES
Appendix 01 - Inspection Report
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
Appendix 02 - Manpower Gantt Chart
Appendix 03 - Life Estimation Tables
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
**CONF ALL
A
A
Z440
Z430
A
LH SHOWN
RH IDENTICAL
B
TYPICAL
B
INSPECTION OF THE FWD ENGINE
TITANIUM CROSSBEAM ASSEMBLY
N_SB_711073_5_SAAA_01_01
Figure A-FSAAA - Sheet 01
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A318/A319/A320/A321
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 71
TITLE: POWER PLANT - MOUNTS - INSPECTION OF THE FORWARD ENGINE
TITANIUM CROSSBEAM ON CFM56-5A ENGINES
MODIFICATION No.: None
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
NOTE
: This Service Bulletin is only applicable to aircraft fitted with CFM56-5A
engines.
(1) Models
319-113 319-114 320-211 320-212
(2) Effectivity by MSN
0029 0059 0068-0073 0078 0083-0087 0093-0094 0104 0110-0112 0115-0118
0121-0127 0135 0137-0138 0140-0142 0148-0150 0152-0154 0157 0159-0162
0171-0172 0174-0175 0181-0183 0185 0192 0195 0197 0200-0203 0205-0206
0208-0211 0213 0216-0220 0229 0231-0232 0234 0237 0239 0242 0248 0253-0255
0262-0263 0265 0267-0269 0272-0273 0277 0279 0281-0282 0284-0285 0287 0290
0293-0294 0297-0298 0300-0303 0306-0307 0309 0311-0312 0318-0319 0324-0325
0328-0331 0339-0343 0345-0346 0350 0355 0358 0360 0367 0370-0372 0378
0380-0382 0387-0388 0390 0395 0399-0404 0407-0410 0417-0418 0420-0422
0426-0427 0436 0438 0445 0466 0482 0491 0497 0501 0507 0511 0525 0528 0531
0534 0537 0546 0549 0554 0569 0572 0579 0598 0600 0608-0610 0616 0618
0622-0623 0625 0627 0634 0636-0637 0639 0641 0644-0645 0647 0649 0651 0656
0658 0660 0662 0669-0672 0679 0682 0685 0688-0689 0691 0693-0695 0697 0700
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A318/A319/A320/A321
SERVICE BULLETIN
0711 0717 0719 0721 0723 0726 0728-0729 0732 0736 0738 0740 0742 0744 0752
0757 0766 0769 0773-0774 0778-0779 0785-0786 0793 0795 0800-0801 0807 0809
0813-0814 0817-0818 0829-0832 0840 0845-0846 0853 0860 0869 0875 0880 0884
0894 0903 0905 0907 0911 0923 0937 0957-0958 0962 0964 0971 0975 0981 0988
0996
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
11X
 0115
13Y
 0371
31V
 0293 0420 0436 0579
60U
 0325
61W
 0112
69X
 0219 0300 0328
73W
 0087
76W
 0140 0157
82U
 0279
85T
 0234
89Q
 0142
AAF
 0639
ACA
 0059 0068 0073 0084 0122 0126 0127 0141 0149 0150 0154 0159
0174 0175 0183 0210 0231 0232 0242 0248 0253 0254 0255 0265
0277 0284 0290 0309 0324 0330 0341 0378 0403 0404 0546 0572
0634 0656 0670 0672 0682 0688 0691 0693 0695 0697 0711 0719
0721 0728 0732 0736 0740 0742 0752 0757 0769 0773 0779 0785
0800 0813 0817 0829 0831 0840 0845
AFR
 0237 0287 0598 0600 0608 0618 0625 0637
AHY
 0331
ANA
 0482 0501 0507 0531 0534 0549 0554 0658 0669 0685
ANR
 0671
ART
 0662
B2V
 0185
CFG
 0774 0809 0884 0894 0905 0957 0971
DAL
 0118 0121 0125 0152 0153 0160 0171 0192 0197 0206 0208 0213
0262 0263 0272 0273 0281 0282 0297 0298 0306 0307 0318 0319
0329 0339 0340 0355 0358 0360 0367 0372 0380 0381 0387 0388
0399 0408 0410 0417 0418 0766 0778 0786 0801 0807 0818 0830
0832 0846 0903 0907 0911 0923 0962 0964 0981 0988 0996
DAT
 0409 0466
DLH
 0069 0070 0071 0072 0078 0083 0086 0093 0094 0104 0110 0111
0116 0161 0162 0172 0202 0216 0609 0610 0616 0623 0627 0636
0641 0651 0679 0689 0694 0700 0717 0723 0729 0738 0744 0853
0860 0875
ETD
 0350
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A318/A319/A320/A321
SERVICE BULLETIN
OPERATOR
 MSN
F2I
 0085 0138 0148 0203 0220 0239 0285 0294 0301 0342 0422 0497
0525 0793 0814
FRN
 0647 0660
GWI
 0117 0135 0137 0200 0201 0209 0217 0218 0267 0268 0269 0346
0382 0401
I2L
 0491
IND
 0343
IRA
 0303 0312 0345
IZG
 0311 0395 0400 0407 0426 0644 0937
JAV
 0029 0537
JBW
 0445
KAC
 0181 0182 0195
LBN
 0427
LUR
 0229 0726
MLD
 0622
NVD
 0211 0528
RIH
 0438
RYW
 0569
SDM
 0649
SOL
 0302
SWM
 0421
TAR
 0123 0124 0205 0370 0390 0402 0511 0869 0880 0958 0975
TDR
 0795
WRC
 0645
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A318/A319/A320/A321
SERVICE BULLETIN
(4) Configuration by MSN
MSN
 CONFIGURATION
0029 0059 0068 0069 0070 0071 0072 0073 0078 0083 0084
0085 0086 0087 0093 0094 0104 0110 0111 0112 0115 0116
0117 0118 0121 0122 0123 0124 0125 0126 0127 0135 0137
0138 0140 0141 0142 0148 0149 0150 0152 0153 0154 0157
0159 0160 0161 0162 0171 0172 0174 0175 0181 0182 0183
0185 0192 0195 0197 0200 0201 0202 0203 0205 0206 0208
0209 0210 0211 0213 0216 0217 0218 0219 0220 0229 0231
0232 0234 0237 0239 0242 0248 0253 0254 0255 0262 0263
0265 0267 0268 0269 0272 0273 0277 0279 0281 0282 0284
0285 0287 0290 0293 0294 0297 0298 0300 0301 0302 0303
0306 0307 0309 0311 0312 0318 0319 0324 0325 0328 0329
0330 0331 0339 0340 0341 0342 0343 0345 0346 0350 0355
0358 0360 0367 0370 0371 0372 0378 0380 0381 0382 0387
0388 0390 0395 0399 0400 0401 0402 0403 0404 0407 0408
0409 0410 0417 0418 0420 0421 0422 0426 0427 0436 0438
0445 0466 0482 0491 0497 0501 0507 0511 0525 0528 0531
0534 0537 0546 0549 0554 0569 0572 0579 0598 0600 0608
0609 0610 0616 0618 0622 0623 0625 0627 0634 0636 0637
0639 0641 0644 0645 0647 0649 0651 0656 0658 0660 0662
0669 0670 0671 0672 0679 0682 0685 0688 0689 0691 0693
0694 0695 0697 0700 0711 0717 0719 0721 0723 0726 0728
0729 0732 0736 0738 0740 0742 0744 0752 0757 0766 0769
0773 0774 0778 0779 0785 0786 0793 0795 0800 0801 0807
0809 0813 0814 0817 0818 0829 0830 0831 0832 0840 0845
0846 0853 0860 0869 0875 0880 0884 0894 0903 0905 0907
0911 0923 0937 0957 0958 0962 0964 0971 0975 0981 0988
0996
001
(5) Configuration definition
**CONF 001
Config. 001 is valid for all the aircraft given in the effectivity of this Service Bulletin as a
standard configuration.
(6) Material Effectivity
MATERIAL
 QTY PER A/C
 SEE NOTES
Equipment BFEA01
 1
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
The forward engine titanium crossbeam on CFM56-5A engine powered on A319 and
A320 aircraft may surpass the fatigue life limits on Part Number (PN) 238-0204-501.
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A318/A319/A320/A321
SERVICE BULLETIN
Further investigations have confirmed the requirement for the replacement of the
titanium crossbeam before reaching its fatigue life limit of 64000 Flight Cycle (FC).
(2) Objective/Action
This Inspection Service Bulletin is published to advise operators of CFM56-5A
engine powered A319 and A320 aircraft of the issue of UTAS Service Bulletin No.
RA32071-168.
This Inspection Service Bulletin addresses the mandated inspection of titanium
crossbeam (PN 238-0204-501) fitted only on CFM56-5A engines prior to its life limit.
(3) Advantages
The accomplishment of this Service Bulletin will enable the identification of the
transferable component PN 238-0204-501.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
Task 711073-832-801-001: Inspection
(1) Do the Detail Inspection (DET) of the FWD Engine Mount Titanium Crossbeam on
Engine 1
(2) Do the DET of the FWD Engine Mount Titanium Crossbeam on Engine 2
(3) Replace the FWD Engine Mount Titanium Crossbeam Assembly on Engine 1
(4) Replace the FWD Engine Mount Titanium Crossbeam Assembly on Engine 2
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA) will be issued
to confirm this classification. It is anticipated that the AD will confirm the 64000 FC
and/or Jan 01/19 given but reference should be made to the AD for confirmation of the
mandated accomplishment timescale.
Accomplishment of this Service Bulletin must be done as specified in the compliance
table:
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 5
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A318/A319/A320/A321
SERVICE BULLETIN
Table 01, Config. 001 - DET of the FWD Engine Titanium Crossbeam
COMPLIANCE TIME
CONDITION
 ACTION
THRESHOLD
Aircraft equipped
with CFM56-5A
Do a DET in accordance with TASK
711073-832-801 001 Inspection
Before Jan 01/19 or 64000 Flight Cycle
(FC) of part accumulated life from first
flight
If the life history
of the PN
238-0204-501 is
not found
Remove the FWD engine mount
titanium crossbeam
Before Jan 01/19 or calculated through
date according to Appendix 03 - Life
Estimation Tables
If the life history
of the PN
238-0204-501 is
found
Remove the FWD engine mount
titanium crossbeam
Before accumulated life from first flight is
above 64000 FC (demonstrated by
tracking documentation)
Replace by steel crossbeam, refer to
Service Bulletin No. A320-71-1076
(UTAS Service Bulletin No.
RA32071-171) or UTAS Service Bulletin
No. RA32071-113.
or
For the existing
part which is
removed and life
history of the PN
238-0204-501 is
found
or
For the existing
part which is
removed and life
history of the PN
238-0204-501 is
not found
Reject and replace existing FWD engine
mount crossbeam
Discard removed PN
Install new FWD engine mount titanium
crossbeam 238-0204-501
Report to AIRBUS
Before next flight
If new FWD
engine mount
titanium
crossbeam PN
238-0204-501 is
installed with less
than 64000 FC
Track the corresponding life tracking
records and repeat the task inspection
Before 64000 FC life of the part
If PN marked is
PN 642-2002-503
No further action in accordance with this
Service Bulletin
None
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA.21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 6
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A318/A319/A320/A321
SERVICE BULLETIN
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
Task 711073-832-801-001: Inspection
Get Access
 0.50
On Aircraft
Replace the FWD Engine Mount Titanium Crossbeam
Assembly on Engine 1
3.50
Replace the FWD Engine Mount Titanium Crossbeam
Assembly on Engine 2
3.50
Close-Up
 0.50
TOTAL MANHOURS
 8.00
ELAPSED TIME (HOURS)
 0.50
Additional manhours relat ed to Vendor SB; refer to:
Do the Detail Inspection (DET) of the FWD Engine
Mount Titanium Crossbeam on Engine 1
UTAS Service Bulletin No.
RA32071-168
Do the DET of the FWD Engine Mount Titanium
Crossbeam on Engine 2
UTAS Service Bulletin No.
RA32071-168
NOTE
: For an explanation of the man-hours and elapsed time, refer to the Gantt
Chart, Fig. A-FABAA
 given in Appendix 02 - Manpower Gantt Chart .
NOTE
: The minimum man-hours necessary to accomplish this Service Bulletin are
those for the Inspection. Depending on the inspection result, additional man-
hours can apply.
H. WEIGHT AND BALANCE
Not Changed
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
Aircraft Maintenance Manual (AMM)
 06-20-00 12-34-24 71-13-00
71-21-11 78-30-00 78-36-00
Elec. Std. Practices Manual (ESPM)
 20-55-00
In Service Information (ISI)
 00.05.00002
Service Bulletin (SB)
 A320-71-1076
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 7
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A318/A319/A320/A321
SERVICE BULLETIN
Vendor Service Bulletin (VSB)
 UTAS Service Bulletin No.
RA32071-113
UTAS Service Bulletin No.
RA32071-168
UTAS Service Bulletin No.
RA32071-171
K. PUBLICATION AFFECTED
None
L. INTERCHANGEABILITY/MIXABILITY
Not Applicable
M. SPARES
None
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 8
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A318/A319/A320/A321
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
Vendor parts are to be procured from:
Equipment BFEA01
 UTC Aerospace Systems - Aerostructures
Group
850 LAGOON Drive
Chula Vista, CA 91910-2098
USA
Phone: 6196912006
Fax: 6196916195
(2) Price and Availability
Equipment BFEA01
Procurement terms for the equipment must be negotiated with the equipment supplier.
B. INDUSTRY SUPPORT INFORMATION
Industry support terms for the equipment must be negotiated with the equipment supplier.
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.
C. LIST OF COMPONENTS
No Kit
D. LIST OF MATERIALS - OPERATOR SUPPLIED
(1) Consumable Materials
None
(2) Components
None
(3) Equipment
Equipment BFEA01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
238-0204-501
 2
 XBEAM
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 9
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A318/A319/A320/A321
SERVICE BULLETIN
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
F. TOOLING
(1) Tooling - Price and Availability
None
(2) Tools
To accomplish this Service Bulletin it is necessary to use the tools listed in the
subsequent referenced tasks:
- AMM Task 71-21-11-000-043
- AMM Task 71-21-11-400-043.
(3) Special Tools
None
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 10
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A318/A319/A320/A321
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 711073-832-801-001 - Inspection
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. To allow more flexibility, the rule "refer to" and "in
accordance with" will apply to these paragraphs 3.C. and 3.D. Other paragraphs
are recommended and may be deviated from, done as part of other actions or
done with accepted methods different from those given in the Service Bulletin, as
long as the RC paragraphs can be done and the aircraft can be put back into a
serviceable condition.
NOTE
: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 11
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A318/A319/A320/A321
SERVICE BULLETIN
For any deviations to the instructions contained herein, contact AIRBUS for further
instructions and approval.
NOTE
: The purpose of flowcharts is to supplement the information given in the Procedure
and Compliance paragraphs and not to serve as the primary source for tasks or
compliance times given in this Service Bulletin.
Task Associated Data
Zone
430 440
Manpower
TOTAL MANHOURS
 8.00
ELAPSED TIME (HOURS)
 0.50
Additional manhours related to Vendor SB; refer to:
UTAS Service Bulletin No. RA32071-168
A. GENERAL
(1) Subtask 711073-910-001-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
(a) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(2) Subtask 711073-839-001-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
B. PREPARATION
(1) Subtask 711073-941-001-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-869-002
Task 71-13-00-010-040
Task 78-30-00-481-041
Task 78-36-00-010-040
NOTE
: For the basic Aircraft configuration, refer to AMM Chapter "Introduction -
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 12
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A318/A319/A320/A321
SERVICE BULLETIN
Aircraft status for maintenance" in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.
(b) Open the fan cowl doors, refer to AMM Task 71-13-00-010-040.
(c) Make the thrust reverser unserviceable, refer to AMM Task 78-30-00-481-041.
(d) Open the thrust reverser doors to the 45˚ position, refer to AMM Task
78-36-00-010-040.
(e) Put an access platform in position below the fan cowl doors.
C. PROCEDURE
(1) Subtask 711073-220-001-001 - Do the Detail Inspection (DET) of the FWD Engine
Mount Titanium Crossbeam on Engine 1
Work Zones and Access Panels
Zone
 Access/Work location
430
 Work location
 ENGINE 1
References
In Service Information (ISI)
 00.05.00002
Service Bulletin (SB)
 A320-71-1076
Vendor Service Bulletin (VSB)
 UTAS RA32071-168
Fig. A-FFAAA
Flowchart
Sheet 01
(a) Do the DET of FWD engine crossbeam in accordance with UTAS Service Bulletin
No. RA32071-168.
Refer to Fig. A-FFAAA
.
1
 Do a check for the crossbeam PN 238-0204-501:
a
 If PN marked on the crossbeam is equal to PN 642-2002-503:
<1> No further action in accordance with this Service Bulletin.
b
 If PN 238-0204-501 is found:
<1> If the life history of the part is not available:
NOTE
: If no data or only partial data are available,
operators may refer to the guidance specified in ISI
00.05.00002 to determine the FC accumulated by a
crossbeam.
Accomplish the Service Bulletin No. A320-71-1076 within the
threshold given in PLANNING INFORMATION paragraph E.(2).
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 13
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A318/A319/A320/A321
SERVICE BULLETIN
or
<a> Remove the crossbeam in accordance with SUBTASK
711073-960-005 001 Replace the FWD Engine Mount Titanium
Crossbeam Assembly on Engine 1 within the threshold given in
PLANNING INFORMATION paragraph E.(2).
<b> Install the crossbeam in accordance with SUBTASK
711073-960-005 001 Replace the FWD Engine Mount Titanium
Crossbeam Assembly on Engine 1 within the threshold given in
PLANNING INFORMATION paragraph E.(2) and Appendix 03 -
Life Estimation Tables .
- Upload the inspection report in AirbusWorld, refer to
Appendix 01 - Inspection Report before next flight.
NOTE
: Uploading of inspection report is not required
for compliance.
- Repeat the inspection within the threshold given in
PLANNING INFORMATION paragraph E.(2).
<2> If the life history of the part is available:
Accomplish the Service Bulletin No. A320-71-1076 within the
threshold given in PLANNING INFORMATION paragraph E.(2).
or
<a> Remove the crossbeam in accordance with SUBTASK
711073-960-005 001 Replace the FWD Engine Mount Titanium
Crossbeam Assembly on Engine 1 within the threshold given in
PLANNING INFORMATION paragraph E.(2).
<b> Install the crossbeam in accordance with SUBTASK
711073-960-005 001 Replace the FWD Engine Mount Titanium
Crossbeam Assembly on Engine 1 within the threshold given in
PLANNING INFORMATION paragraph E.(2) and Appendix 03 -
Life Estimation Tables .
- Upload the inspection report in AirbusWorld, refer to
Appendix 01 - Inspection Report before next flight.
NOTE
: Uploading of inspection report is not required
for compliance.
- Repeat the inspection within the threshold given in
PLANNING INFORMATION paragraph E.(2).
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 14
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A318/A319/A320/A321
SERVICE BULLETIN
(2) Subtask 711073-220-002-001 - Do the DET o f the FWD Engine Mount Titanium
Crossbeam on Engine 2
Work Zones and Access Panels
Zone
 Access/Work location
440
 Work location
 ENGINE 2
References
In Service Information (ISI)
 00.05.00002
Service Bulletin (SB)
 A320-71-1076
Vendor Service Bulletin (VSB)
 UTAS RA32071-168
Fig. A-FFAAA
Flowchart
Sheet 01
(a) Do the DET of FWD engine crossbeam in accordance with UTAS Service Bulletin
No. RA32071-168.
Refer to Fig. A-FFAAA
.
1
 Do a check for the crossbeam PN 238-0204-501:
a
 If PN marked on the crossbeam is equal to PN 642-2002-503:
<1> No further action in accordance with this service Bulletin.
b
 If PN 238-0204-501 is found:
<1> If the life history of the part is not available:
NOTE
: If no data or only partial data are available,
operators may refer to the guidance specified in ISI
00.05.00002 to determine the FC accumulated by a
crossbeam.
Accomplish the Service Bulletin No. A320-71-1076 within the
threshold given in PLANNING INFORMATION paragraph E.(2).
or
<a> Remove the crossbeam in accordance with SUBTASK
711073-960-006 001 Replace the FWD Engine Mount Titanium
Crossbeam Assembly on Engine 2 within the threshold given in
PLANNING INFORMATION paragraph E.(2).
<b> Install the crossbeam in accordance with SUBTASK
711073-960-006 001 Replace the FWD Engine Mount Titanium
Crossbeam Assembly on Engine 2 within the threshold given in
PLANNING INFORMATION paragraph E.(2) and Appendix 03 -
Life Estimation Tables .
- Upload the inspection report in AirbusWorld, refer to
Appendix 01 - Inspection Report before next flight.
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 15
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A318/A319/A320/A321
SERVICE BULLETIN
NOTE
: Uploading of inspection report is not required
for compliance.
- Repeat the inspection within the threshold given in
PLANNING INFORMATION paragraph E.(2).
<2> If the life history of the part is available:
Accomplish the Service Bulletin No. A320-71-1076 within the
threshold given in PLANNING INFORMATION paragraph E.(2).
or
<a> Remove the crossbeam in accordance with SUBTASK
711073-960-006 001 Replace the FWD Engine Mount Titanium
Crossbeam Assembly on Engine 2 within the threshold given in
PLANNING INFORMATION paragraph E.(2).
<b> Install the crossbeam in accordance with SUBTASK
711073-960-006 001 Replace the FWD Engine Mount Titanium
Crossbeam Assembly on Engine 2 within the threshold given in
PLANNING INFORMATION paragraph E.(2) and Appendix 03 -
Life Estimation Tables .
- Upload the inspection report in AirbusWorld, refer to
Appendix 01 - Inspection Report before next flight.
NOTE
: Uploading of inspection report is not required
for compliance.
- Repeat the inspection within the threshold given in
PLANNING INFORMATION paragraph E.(2).
(b) No further action in accordance with this Service Bulletin.
(3) Subtask 711073-960- 005-001 - Replace the FWD Engine Mount Titanium
Crossbeam Assembly on Engine 1
Work Zones and Access Panels
Zone
 Access/Work location
430
 Work location
 ENGINE 1
Manpower Resources
Manhours
 3.50
Minimum number of person
 1
Subtask elapsed time
 3.50
Skills
 NON SPECIFIC
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 16
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A318/A319/A320/A321
SERVICE BULLETIN
Material necessary to do the job
Equipment BFEA01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
238-0204-501
 1
 XBEAM
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
References
Aircraft Maintenance Manual (AMM)
 Task 71-21-11-000-043
Task 71-21-11-400-043
(a) Remove, refer to AMM Task 71-21-11-000-043:
1 Crossbeam Assy Discard
(b) Install, refer to AMM Task 71-21-11-400-043:
1 Crossbeam Assy 238-0204-501
(4) Subtask 711073-960- 006-001 - Replace the FWD Engine Mount Titanium
Crossbeam Assembly on Engine 2
Work Zones and Access Panels
Zone
 Access/Work location
440
 Work location
 ENGINE 2
Manpower Resources
Manhours
 3.50
Minimum number of person
 1
Subtask elapsed time
 3.50
Skills
 NON SPECIFIC
Material necessary to do the job
Equipment BFEA01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
238-0204-501
 1
 XBEAM
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
References
Aircraft Maintenance Manual (AMM)
 Task 71-21-11-000-043
Task 71-21-11-400-043
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 17
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A318/A319/A320/A321
SERVICE BULLETIN
(a) Remove, refer to AMM Task 71-21-11-000-043:
1 Crossbeam Assy Discard
(b) Install, refer to AMM Task 71-21-11-400-043:
1 Crossbeam Assy 238-0204-501
D. TEST
None
E. CLOSE-UP
(1) Subtask 711073-942-001-001 - Close-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 71-13-00-410-040
Task 78-30-00-081-041
Task 78-36-00-410-040
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Remove the access platform(s).
(c) Close the thrust reverser doors, refer to AMM Task 78-36-00-410-040.
(d) Make the thrust reverser serviceable, refer to AMM Task 78-30-00-081-041.
(e) Close the fan cowl doors, refer to AMM Task 71-13-00-410-040.
(f) Put the aircraft back to its initial configuration.
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 18
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A318/A319/A320/A321
SERVICE BULLETIN
**CONF ALL
THE PURPOSE OF FLOWCHARTS IS TO SUPPLEMENT THE INFORMATION
GIVEN IN THE PROCEDURE AND COMPLIANCE PARAGRAPHS AND NOT TO
SERVE AS THE PRIMARY SOURCE FOR TASKS OR COMPLIANCE TIMES
GIVEN IN THIS SERVICE BULLETIN.
NOTE:
IDENTIFY THE FWD ENGINE MOUNT TITANIUM CROSSBEAM IN
ACCORDANCE WITH TASK 711073−832−801−001 WITHIN THE
THRESHOLD GIVEN IN PLANNING INFORMATION PARAGRAPH E.(2)
IS THE PN MARKED
ON THE CROSSBEAM
238−0204−501?
IS THE LIFE
HISTORY OF THE PART
AVAILABLE?
YES NO
NO FURTHER ACTION
YES NO
OR
REJECT AND REPLACE FWD ENGINE MOUNT
CROSSBEAM WITH ANOTHER TITANIUM 
CROSSBEAM WITH LESS THAN 64000 FC 
(DEMONSTRATED BY TRACKING RECORDS)
REPEAT INSPECTION WITHIN THE
THRESHOLD GIVEN IN PLANNING
INFORMATION PARAGRAPH E.(2)
REMOVE THE FWD ENGINE TITANIUM
CROSSBEAM WITHIN THE THRESHOLD GIVEN
IN PLANNING INFORMATION PARAGRAPH E.(2),
SINCE FIRST FLIGHT (DEMONSTRATED BY 
REMOVE THE FWD ENGINE TITANIUM CROSSBEAM
WHEN PART ACCUMULATED LIFE TIME GIVEN
IN PLANNING INFORMATION PARAGRAPH E.(2)
REPLACE BY STEEL CROSSBEAM WITHIN THE
THRESHOLD GIVEN IN PLANNING INFORMATION
PARAGRAPH E.(2) IN ACCORDANCE WITH
SERVICE BULLETIN No A320−71−1076 (VENDOR
SERVICE BULLETIN No RA32071−171) OR
VENDOR SERVICE BULLETIN No RA32071−113
DISCARD REMOVED PN 238−0204−501
AND REPORT TO AIRBUS
NO FURTHER ACTION
TRACKING DOCUMENTATION)
DISCARD REMOVED PN 238−0204−501
N_SB_711073_5_FAAA_01_06
Figure A-FFAAA - Sheet 01
Flowchart
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 19
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A318/A319/A320/A321
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 20
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A318/A319/A320/A321
SERVICE BULLETIN
Appendix 01 - Inspection Report
**CONF ALL
For an explanation of the inspection report, refer to the next page(s).
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A318/A319/A320/A321
SERVICE BULLETIN
Appendix 01 - Inspection Report
**CONF ALL
INSPECTION REPORT
SERVICE BULLETIN No :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A320−71−1073
DATE OF INSPECTION :
INSPECTION METHOD : DETAILED
INSPECTION
UPLOAD THIS INSPECTION REPORT
IN ACCORDANCE WITH ISI 00.00.00179
USING THE ONLINE REPORTING APPLICATION
IN AIRBUSWORLD
ACTION ENGINE 1 ENGINE 2
YES NO YES NO
IS CROSSBEAM ASSY REPLACED
WITH SAME TYPE OF EXISTING
CROSSBEAM ASSY?
N_SB_711073_5_AAAA_01_02
Figure A-FAAAA - Sheet 01
Inspection Report
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A318/A319/A320/A321
SERVICE BULLETIN
Appendix 02 - Manpower Gantt Chart
**CONF ALL
For an explanation of the man-hours and elapsed time, refer to the next page(s).
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A318/A319/A320/A321
SERVICE BULLETIN
Appendix 02 - Manpower Gantt Chart
**CONF ALL
GET ACCESS
DO A DETAILED INSPECTION OF
CLOSE−UP
THE FWD ENGINE MOUNT
TITANIUM CROSSBEAM ON
ENGINE 1
DO A DETAILED INSPECTION OF
THE FWD ENGINE MOUNT
TITANIUM CROSSBEAM ON
ENGINE 2
0.50 0.252
0.50 0.25
ELAPSED TIME ASSUMPTION SERVICE BULLETIN No A320−71−1073
MH ET/S
TOTAL MANHOURS
SB ELAPSED TIME
1.00
0.50
STEPS
MH
ET/S:
PER
MANHOURS
ELAPSED TIME PER STEP
NUMBER OF PERSONS
01
02
THIS CHART IS ONLY A PROPOSAL.
OPERATORS MAY DETERMINE THAT ANOTHER WAY
TO DO THE WORK IS MORE SUITABLE FOR THEM.
01
02
NOTE:
PER
:
:
SB ELAPSED TIME
(HOURS)
IF A VSB IS INVOLVED, THE ASSOCIATED MANHOURS
ARE NOT REFLECTED IN THIS GANTT CHART.
0
2
0.25 0.5
REFER TO VENDOR SERVICE BULLETIN
REFER TO VENDOR SERVICE BULLETIN
N_SB_711073_5_ABAA_01_03
Figure A-FABAA - Sheet 01
Manpower Gantt Chart
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29

@A318/A319/A320/A321
SERVICE BULLETIN
Appendix 03 - Life Estimation Tables
**CONF ALL
For the existing flight cycles of each engine, refer to the following Life Estimation Tables.
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 30

@A318/A319/A320/A321
SERVICE BULLETIN
Appendix 03 - Life Estimation Tables
**CONF ALL
JAN−2018
FEB−2018
MAR−2018
APR−2018
MAY−2018
JUN−2018
JUL−2018
AUG−2018
SEP−2018
OCT−2018
NOV−2018
DEC−2018
JAN−2019
BEFORE 04/02/1992
61,801
61,981
62,182
62,375
62,575
62,769
62,969
63,169
63,363
63,563
63,757
63,957
REPLACEMENT JAN 01
OF PN 238−0204−501
DATE OF MANUFACTURE 01
(PN 238−0204−501) LIFE ESTIMATION (IN FC)
FWD MOUNT TITANIUM CROSSBEAM
DONE IN THE YEAR
DATE OF MANUFACTURE OF PN 238−0204−501
BEFORE 04/02/1992
61,601
63,957
JAN 01/09
REPLACEMENT BEFORE
02/04/1992
52,536
54,892
57,247
2017
2018
2019
20/10/1992
51,368
53,724
56,079
05/07/1995
45,824
48,180
50,535
09/08/1995
45,629
47,985
50,341
07/05/1996
44,080
46,436
48,791
13/01/1997
42,644
45,000
47,356
27/05/1997
41,927
44,283
46,639
26/01/1998
40,597
42,953
45,309
19/02/1998
40,459
42,815
45,170
23/02/1998
40,436
42,792
45,147
04/03/1998
40,384
42,740
45,095
31/03/1998
40,228
42,584
44,939
21/05/1998
39,933
42,289
44,645
20/07/1998
39,587
41,943
44,298
01/08/1998
39,517
41,873
44,229
2017
2018
2019
OF PN 238−0204−501
DATE OF MANUFACTURE
(PN 238−0204−501) LIFE ESTIMATION (IN FC)
FWD MOUNT TITANIUM CROSSBEAM
DONE IN THE YEAR
(PN 238−0204−501) LIFE ESTIMATION (IN FC)
FWD MOUNT TITANIUM CROSSBEAM
DONE IN THE MONTH
REFER TO VSB UTAS RA32071−168 FOR DATES OF MANUFACTURE OF THE CROSSBEAMS ACCORDING TO THEIR SN.01
NOTE:
01
N_SB_711073_5_ACAA_01_04
Figure A-FACAA - Sheet 01
Life Estimation Tables
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 31

@A318/A319/A320/A321
SERVICE BULLETIN
Service Bulletin REPORTING
TITLE: POWER PLANT - MOUNTS - INSPECTION OF THE FORWARD ENGINE
TITANIUM CROSSBEAM ON CFM56-5A ENGINES
MODIFICATION No.: None
SB Reporting status
This Service Bulletin will only be incorporated into affected customized Maintenance and Flight
Operations Products if it is duly reported to Airbus.
General information
The SB Reporting policy is published in ISI 00.00.00135. This document provides information regarding:
the SB Reporting means and benefits, the update of customized Maintenance Products and customized
Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations Products" for
further information on the update of affected Flight Operations Products.
SB Reporting procedure
Standard practice to report SB is to use the online reporting application on AirbusWorld.
Refer to ISI 00.00.00179:
- For complete information on reporting means to Airbus. Question 2 "What are the standard
practices for SB reporting?"
- If this SB requires previous or simultaneous accomplishment of other SBs, Question 3 "What about
the reporting of prerequisite Service Bulletin?"
NOTE:
 ISI 00.00.00179 covers all the frequently asked questions about SB Reporting. It is revised on a
regular basis.
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 32

@A318/A319/A320/A321
SERVICE BULLETIN
QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin. The reported data
that you provide us will be used to analyse areas of difficulties and to take corrective action to further
improve the quality of our Service Bulletins.
We thank you for the time you have taken in completing this form.
(Please rate on a scale of 1 to 4, with 4 being the highest score)
- Quality rating of this SB 4321
- Quality rating of the Accomplishment Instructions 4321
- Quality rating of the Illustrations 4321
- Is this SB easy to understand ? Y/N
If you have had difficulties in the accomplishment of this SB please quote below the area(s) and give a
short description of the issue.
Planning Material Instructions
X Effectivity X Kit content X Preparation
X Reason X List of Materials Operator Supplied X Mod/Inspection
X Manpower X Industry support X Test
X References X Re-identification X Close-Up
X Publication X Tooling X Illustrations
Comments:
Operator: Date:
Name/Title:
Please return this form to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn : SEM4 Service Bulletins Management
F A X:( 3 3 )56 19 34 25 1
Or via your Resident Customer Support Office.
DATE: Jun 08/18 SERVICE BULLETIN No.: A320-71-1073
REVISION No.: 00 - Jun 08/18 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
