# Airbus Service Bulletin A330-44-3054

Copy: No revision named ("A330-44-3054_R00"), 24 pages: PDF https://openairdocs.org/files/sha256/79/37/79370be13784832c06cdb1e88d2d739a36537061d163c6237f6e278349a94fe5; text https://openairdocs.org/service-documents/airbus/a330-44-3054/file/79370be13784.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2024-2718, the docket of AD 2025-10-12. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A330-44-3054
- Page: https://openairdocs.org/service-documents/airbus/a330-44-3054

## Text (24 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2024-2718, the docket of AD 2025-10-12. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

A330
SERVICE BULLETIN
REV 00 Dec 22/23 A330-44-3054
Page 1
CONF ALL
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
 
The content of this document is the property of Airbus. All rights including copyrights are reserved.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
MANDATORY MANDATORY MANDATORY
ATA SYSTEM: 44
TITLE: CABIN SYSTEM - BROADBAND COMMUNICATION SYSTEM -
INSPECTION - PANASONIC ADAPTER PLATE
MODIFICATION No.:
None

### Page 2

A330
SERVICE BULLETIN
SUMMARY
REV 00 Dec 22/23 A330-44-3054
Page 2
ATA SYSTEM: 44
TITLE: CABIN SYSTEM - BROADBAND COMMUNICATION SYSTEM -
INSPECTION - PANASONIC ADAPTER PLATE
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
CONF 001
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 002
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF ALL
B. REASON
(1) History
During the inspection, an operator found corrosion and cracks on the adapter plate.
(2) Objective/Action
This Service Bulletin consists to cover the PANASONIC VSBs Dual Panel Antenna
(DPA) Ref. PANASONIC AVIONICS CORPORATION (1UL05) VSB RDAA903194-01-44-00
and Single Panel Antenna (SPA) Ref. PANASONIC AVIONICS CORPORATION (1UL05)
VSB RDAA903528-01-44-00, which removes the Radome to allow a General Visual
Inspection (GVI) of the Plate and Skirt Assy-Adapter. Depending on results of GVI,
maintenance coordination with HAECO Cabin Solutions may be required, involving the
removal of the Adapter Plate.
(3) Advantages
None
(4) Operational/Maintenance Consequences
None
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO

### Page 3

A330
SERVICE BULLETIN
SUMMARY
REV 00 Dec 22/23 A330-44-3054
Page 3
EVALUATION TABLE
A/C OPERATION
AFFECTED
NO VENDOR SB YES
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD YES
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
NOTE: Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION
CONF 001
No specific aircraft maintenance configuration required.
CONF 002
No specific aircraft maintenance configuration required.
CONF ALL
E. MATERIAL PRICE INFORMATION
CONF 001
(1) Do a GVI of the Adapter Plate
(a) T ask set A330-A-44-XX-3054-01000-93BA-A Do a GVI of the Adapter Plate
No material
CONF 002
(1) Do a GVI of the Adapter Plate
(a) T ask set A330-A-44-XX-3054-01000-93BA-A Do a GVI of the Adapter Plate
No material
CONF ALL
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
82Z 96U 99Y ABB AZU CES CFG CSC CSN EIN EVA FIN GIA IBE KNE SAS TAP THY
G. CONCURRENT REQUIREMENTS
None
H. NATURE OF THE WORK
CONF 001
(1) Do a GVI of the Adapter Plate
(a) T ask set A330-A-44-XX-3054-01000-93BA-A Do a GVI of the Adapter Plate
AIRCRAFT YES
EQUIPMENT NO
CONF 002
(1) Do a GVI of the Adapter Plate

### Page 4

A330
SERVICE BULLETIN
SUMMARY
REV 00 Dec 22/23 A330-44-3054
Page 4
(a) T ask set A330-A-44-XX-3054-01000-93BA-A Do a GVI of the Adapter Plate
AIRCRAFT YES
EQUIPMENT NO
CONF ALL
I. MANPOWER
CONF 001
(1) Do a GVI of the Adapter Plate
(a) T ask set A330-A-44-XX-3054-01000-93BA-A Do a GVI of the Adapter Plate
MANPOWER
TOTAL MAN-HOURS 3.10 h
ELAPSED TIME (HOURS) 3.10 h
Additional man-hours related to Vendor SB; refer to:
Do a GVI of the PANASONIC Adapter
Plate with a DPA
Ref. PANASONIC AVIONICS CORPORATION
(1UL05) VSB RDAA903194-01-44-00
CONF 002
(1) Do a GVI of the Adapter Plate
(a) T ask set A330-A-44-XX-3054-01000-93BA-A Do a GVI of the Adapter Plate
MANPOWER
TOTAL MAN-HOURS 3.10 h
ELAPSED TIME (HOURS) 3.10 h
Additional man-hours related to Vendor SB; refer to:
Do a GVI of the PANASONIC Adapter
Plate with a SPA
Ref. PANASONIC AVIONICS CORPORATION
(1UL05) VSB RDAA903528-01-44-00

### Page 5

A330
SERVICE BULLETIN
SUMMARY
Figure ICN-A330-A-44XX3054-A-FAPE3-01HKG-A-001-01 Fig.SA Sol.AA SHEET 1/1
REV 00 Dec 22/23 A330-44-3054General Overview
Page 5
CONF ALL
J. GENERAL OVERVIEW
CONF ALL
A
A
Z260
INSPECTION OF THE RADOME ADAPTER PLATE
FR65
FR60
FR61
FR59
ICN-A330-A-44XX3054-A-FAPE3-01HKG-A-001-01

### Page 6

A330
SERVICE BULLETIN
REV 00 Dec 22/23 A330-44-3054
Page 6
ATA SYSTEM: 44
TITLE: CABIN SYSTEM - BROADBAND COMMUNICATION SYSTEM -
INSPECTION - PANASONIC ADAPTER PLATE
1. PLANNING INFORMATION
A. APPLICABILITY
NOTE: This Service Bulletin is only applicable to aircraft on which MOD No. 203251D61559
and MOD No. 204608D63617 (Service Bulletin No. A330-44-3025) or MOD No.
207191D67514 are embodied.
(1) Models
ON A/C 1694, 1700, 1710, 1719, 1728, 1736, 1740, 1747, 1755, 1761, 1777, 1784, 1835,
1854
330-202
ON A/C 0994, 1007, 1013, 1023, 1067, 1078, 1088, 1173, 1742, 1744, 1767, 1778, 1791,
1794, 1806, 1817, 1950, 1951
330-302
ON A/C 1616, 1620, 1622, 1629, 1640, 1642, 1644, 1696, 1704, 1706, 1713, 1718
330-303
ON A/C 1542, 1554, 1574, 1592, 1607, 1624, 1635, 1651, 1660, 1665, 1697, 1715, 1788,
1796, 1798, 1801, 1804, 1809, 1814-1816, 1818, 1821, 1825, 1826, 1833, 1841, 1842, 1846,
1852, 1856, 1858, 1868, 1869, 1873, 1881, 1885, 1894, 1905, 1912
330-343
ON A/C 1819, 1836, 1844, 1850, 1861, 1876, 1892, 1895, 1897, 1900, 1904, 1906, 1908,
1909, 1913, 1914, 1918, 1921, 1922, 1924, 1925, 1934, 1941, 1943, 1946-1948, 1952, 1954,
1958, 1959, 1961, 1988
330-941
CONF ALL
(2) Applicability by MSN
0994 1007 1013 1023 1067 1078 1088 1173 1542 1554 1574 1592 1607 1616 1620
1622 1624 1629 1635 1640 1642 1644 1651 1660 1665 1694 1696 1697 1700 1704
1706 1710 1713 1715 1718 1719 1728 1736 1740 1742 1744 1747 1755 1761 1767
1777 1778 1784 1788 1791 1794 1796 1798 1801 1804 1806 1809 1814-1819 1821
1825 1826 1833 1835 1836 1841 1842 1844 1846 1850 1852 1854 1856 1858 1861
1868 1869 1873 1876 1881 1885 1892 1894 1895 1897 1900 1904-1906 1908 1909
1912-1914 1918 1921 1922 1924 1925 1934 1941 1943 1946-1948 1950-1952 1954
1958 1959 1961 1988
(3) MSN by configuration
CONF 001
MSN CONFIGURATION
0994 1007 1013 1023 1067 1078 1088 1173 1542 1554 1574
1592 1607 1616 1620 1622 1624 1629 1635 1640 1642 1644
1651 1660 1665 1694 1696 1697 1700 1704 1706 1710 1713
1715 1718 1719 1728 1736 1740 1742 1744 1747 1755 1761
1767 1777 1778 1784 1788 1791 1794 1796 1798 1801 1804
1806 1809 1814 1815 1816 1817 1818 1821 1825 1826 1833
1835 1841 1842 1846 1852 1854 1856 1858 1868 1869 1873
1881 1885 1894 1905 1912 1950 1951
001

### Page 7

A330
SERVICE BULLETIN
REV 00 Dec 22/23 A330-44-3054
Page 7
CONF 002
MSN CONFIGURATION
1819 1836 1844 1850 1861 1876 1892 1895 1897 1900 1904
1906 1908 1909 1913 1914 1918 1921 1922 1924 1925 1934
1941 1943 1946 1947 1948 1952 1954 1958 1959 1961 1988
002
CONF ALL
(4) Configuration definition
CONF 001
Configuration 001
CONF 001 is applicable for all the aircraft on which MOD No. 203251D61559
and MOD No. 204608D63617 or SB 44-3025 are embodied and MOD No.
207191D67514 is not embodied.
CONF 002
Configuration 002
CONF 002 is applicable for all the aircraft on which MOD No. 203251D61559
and MOD No. 204608D63617 or SB 44-3025 are not embodied and MOD No.
207191D67514 is embodied.
CONF ALL
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
During the inspection, an operator found corrosion and cracks on the adapter plate.
(2) Objective/Action
This Service Bulletin consists to cover the PANASONIC VSBs Dual Panel Antenna
(DPA) Ref. PANASONIC AVIONICS CORPORATION (1UL05) VSB RDAA903194-01-44-00
and Single Panel Antenna (SPA) Ref. PANASONIC AVIONICS CORPORATION (1UL05)
VSB RDAA903528-01-44-00, which removes the Radome to allow a General Visual
Inspection (GVI) of the Plate and Skirt Assy-Adapter. Depending on results of GVI,
maintenance coordination with HAECO Cabin Solutions may be required, involving the
removal of the Adapter Plate.
(3) Advantages
None
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
T o accomplish this Service Bulletin it is necessary to:
(1) Do a GVI of the Adapter Plate
(a) T ask set A330-A-44-XX-3054-01000-93BA-A Do a GVI of the Adapter Plate
CONF 001
1 Do a GVI of the PANASONIC Adapter Plate with a DPA
CONF 002

### Page 8

A330
SERVICE BULLETIN
REV 00 Dec 22/23 A330-44-3054
Page 8
2 Do a GVI of the PANASONIC Adapter Plate with a SPA
CONF ALL
3 Complete and Send the Inspection Report Sheet
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory. It is expected that an
Airworthiness Directive (AD) published by the European Union Aviation Safety Agency
(EASA) will be issued to confirm this classification. It is anticipated that the AD will
confirm the thresholds and intervals given but reference should be made to the AD for
confirmation of the mandated accomplishment timescale.
Accomplishment of this Service Bulletin must be done in accordance with the
Appendix ACCOMPLISHMENT TIMESCALE.
F. APPROVAL
The technical content of this document is approved under the authority of the Design
Organisation Approval ref. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
CONF 001
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Do a GVI of the Adapter Plate
(a) T ask set A330-A-44-XX-3054-01000-93BA-A Do a GVI of the Adapter Plate
PREPARATION
Job Set-Up 1.50 h
PROCEDURE
Complete and Send the Inspection Report Sheet 0.10 h
PREPARATION FOR TEST
None
TEST
None
CLOSE-UP
Close-Up 1.50 h
TOTAL MAN-HOURS 3.10 h
ELAPSED TIME (HOURS) 3.10 h
Additional man-hours related to Vendor SB; refer to:

### Page 9

A330
SERVICE BULLETIN
REV 00 Dec 22/23 A330-44-3054
Page 9
Do a GVI of the PANASONIC Adapter
Plate with a DPA
Ref. PANASONIC AVIONICS CORPORATION
(1UL05) VSB RDAA903194-01-44-00
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
CONF 002
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Do a GVI of the Adapter Plate
(a) T ask set A330-A-44-XX-3054-01000-93BA-A Do a GVI of the Adapter Plate
PREPARATION
Job Set-Up 1.50 h
PROCEDURE
Complete and Send the Inspection Report Sheet 0.10 h
PREPARATION FOR TEST
None
TEST
None
CLOSE-UP
Close-Up 1.50 h
TOTAL MAN-HOURS 3.10 h
ELAPSED TIME (HOURS) 3.10 h
Additional man-hours related to Vendor SB; refer to:
Do a GVI of the PANASONIC Adapter
Plate with a SPA
Ref. PANASONIC AVIONICS CORPORATION
(1UL05) VSB RDAA903528-01-44-00
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
CONF ALL
H. WEIGHT AND BALANCE
Not changed
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
CONF 001
(1) Do a GVI of the Adapter Plate

### Page 10

A330
SERVICE BULLETIN
REV 00 Dec 22/23 A330-44-3054
Page 10
(a) T ask set A330-A-44-XX-3054-01000-93BA-A Do a GVI of the Adapter Plate
AIRCRAFT MAINTENANCE MANUAL (AMM)
06-20-00, Page Block 00 06-31-53, Page Block 00
T ask 12-34-24-860-802 T ask 44-33-22-000-801
T ask 44-33-22-400-801
ELECTRICAL STANDARD PRACTICES MANUAL (ESPM)
20-55-00
IN SERVICE INFORMATION (ISI)
00.00.00179
VENDOR SERVICE BULLETIN (VSB)
PANASONIC AVIONICS CORPORATION (1UL05) VSB RDAA903194-01-44-00
PANASONIC AVIONICS CORPORATION (1UL05) VSB RDAA903528-01-44-00
CONF 002
(1) Do a GVI of the Adapter Plate
(a) T ask set A330-A-44-XX-3054-01000-93BA-A Do a GVI of the Adapter Plate
AIRCRAFT MAINTENANCE MANUAL (AMM)
06-20-00, Page Block 00 06-31-53, Page Block 00
T ask 12-34-24-860-802 T ask 44-33-22-000-801
T ask 44-33-22-400-801
ELECTRICAL STANDARD PRACTICES MANUAL (ESPM)
20-55-00
IN SERVICE INFORMATION (ISI)
00.00.00179
VENDOR SERVICE BULLETIN (VSB)
PANASONIC AVIONICS CORPORATION (1UL05) VSB RDAA903194-01-44-00
PANASONIC AVIONICS CORPORATION (1UL05) VSB RDAA903528-01-44-00
CONF ALL
K. PUBLICATION AFFECTED
None
L. INDUSTRY SUPPORT INFORMATION
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign. For detailed
support, please refer to the related RIL LR44M23002601.
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.

### Page 11

A330
SERVICE BULLETIN
REV 00 Dec 22/23 A330-44-3054
Page 11
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
CONF 001
Material for task set A330-A-44-XX-3054-01000-93BA-A Do a GVI of the Adapter
Plate
MATERIAL QTY SEE NOTES
Referenced tools See SB
Referenced consumables See SB
Referenced parts See SB
CONF 002
Material for task set A330-A-44-XX-3054-01000-93BA-A Do a GVI of the Adapter
Plate
MATERIAL QTY SEE NOTES
Referenced tools See SB
Referenced consumables See SB
Referenced parts See SB
CONF ALL
B. TOOLING
CONF 001
Referenced tools for task set A330-A-44-XX-3054-01000-93BA-A Do a GVI of the
Adapter Plate
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. AMM T ask 44-33-22-000-801
Ref. AMM T ask 44-33-22-400-801
CONF 002
Referenced tools for task set A330-A-44-XX-3054-01000-93BA-A Do a GVI of the
Adapter Plate
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. AMM T ask 44-33-22-000-801
Ref. AMM T ask 44-33-22-400-801
CONF ALL
C. CONSUMABLES
CONF 001
Referenced consumables for task set A330-A-44-XX-3054-01000-93BA-A Do a GVI
of the Adapter Plate
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. AMM T ask 44-33-22-400-801
CONF 002
Referenced consumables for task set A330-A-44-XX-3054-01000-93BA-A Do a GVI
of the Adapter Plate
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:

### Page 12

A330
SERVICE BULLETIN
REV 00 Dec 22/23 A330-44-3054
Page 12
Ref. AMM T ask 44-33-22-400-801
CONF ALL
D. LIST OF NEW PARTS
CONF 001
Referenced parts for task set A330-A-44-XX-3054-01000-93BA-A Do a GVI of the
Adapter Plate
T o accomplish this Service Bulletin it is necessary to use the expendable parts listed in:
Ref. AMM T ask 44-33-22-400-801
CONF 002
Referenced parts for task set A330-A-44-XX-3054-01000-93BA-A Do a GVI of the
Adapter Plate
T o accomplish this Service Bulletin it is necessary to use the expendable parts listed in:
Ref. AMM T ask 44-33-22-400-801
CONF ALL
E. LIST OF EXISTING PARTS
No parts

### Page 13

A330
SERVICE BULLETIN
REV 00 Dec 22/23 A330-44-3054
Page 13
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A330-A-44-XX-3054-01000-93BA-A (A330-A-44-XX-3054-01ZZZ-93BZ-A)
Do a GVI of the Adapter Plate
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO A MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESPM 20-55-00.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin is classified mandatory or expected to be classified mandatory by
an Airworthiness Directive (AD). The paragraphs 3.C. and 3.E. in these accomplishment
instructions are Required for Compliance (RC) and must be done to comply with the AD.
T o allow more flexibility, the rule "refer to" and "in accordance with" will apply to these
paragraphs 3.C. and 3.E. Other paragraphs are recommended and may be deviated from,
done as part of other actions or done with accepted methods different from those given
in the Service Bulletin, as long as the RC paragraphs can be done and the aircraft can be
put back into a serviceable condition.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including Required for Compliance paragraph
contained herein, contact AIRBUS for further instructions and approval.
A. TASK SET ASSOCIATED INFORMATION
Task Manpower
CONF 001
TOTAL MAN-HOURS 3.10 h
CONF 002
TOTAL MAN-HOURS 3.10 h
CONF 001
ELAPSED TIME (HOURS) 3.10 h

### Page 14

A330
SERVICE BULLETIN
REV 00 Dec 22/23 A330-44-3054
Page 14
CONF 002
ELAPSED TIME (HOURS) 3.10 h
CONF 001
Additional man-hours related to Vendor SB; refer to:
PANASONIC AVIONICS CORPORATION (1UL05) VSB RDAA903194-01-44-00
CONF 002
Additional man-hours related to Vendor SB; refer to:
PANASONIC AVIONICS CORPORATION (1UL05) VSB RDAA903528-01-44-00
CONF ALL
B. PREPARATION
CONF 001
(1) Task A330-A-44-XX-3054-01001-540A-A (A330-A-44-XX-3054-01ZZZ-540Z-A)
Job Set-Up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.50 h
Minimum Number of person 1
Elapsed Time 1.50 h
Referenced Information
Manuals/Drawings References/Sheets
AMM T ask 12-34-24-860-802T ask 44-33-22-000-801
VSB PANASONIC AVIONICS CORPORATION (1UL05)VSB RDAA903194-01-44-00
Procedure
NOTE: For the basic Aircraft configuration, refer to AMM Chapter “Introduction -
Aircraft status for maintenance" in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to Ref. AMM T ask 12-34-
24-860-802.
(b) Put an access platform in position in Zone 260.
(c) Do the job set-up procedure as specified in the removal of the antenna radome,
refer to Ref. AMM T ask 44-33-22-000-801.
(d) For the removal of the antenna radome, refer to Ref. PANASONIC AVIONICS
CORPORATION (1UL05) VSB RDAA903194-01-44-00.
CONF 002
(1) Task A330-A-44-XX-3054-01002-540A-A (A330-A-44-XX-3054-01ZZZ-540Z-A)
Job Set-Up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.50 h
Minimum Number of person 1
Elapsed Time 1.50 h

### Page 15

A330
SERVICE BULLETIN
REV 00 Dec 22/23 A330-44-3054
Page 15
Referenced Information
Manuals/Drawings References/Sheets
AMM T ask 12-34-24-860-802T ask 44-33-22-000-801
VSB PANASONIC AVIONICS CORPORATION (1UL05)VSB RDAA903528-01-44-00
Procedure
NOTE: For the basic Aircraft configuration, refer to AMM Chapter “Introduction -
Aircraft status for maintenance" in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to Ref. AMM T ask 12-34-
24-860-802.
(b) Put an access platform in position in Zone 260.
(c) Do the job set-up procedure as specified in the removal of the antenna radome,
refer to Ref. AMM T ask 44-33-22-000-801.
(d) For the removal of the antenna radome, refer to Ref. PANASONIC AVIONICS
CORPORATION (1UL05) VSB RDAA903528-01-44-00.
CONF ALL
C. PROCEDURE
CONF 001
(1) Task A330-A-44-XX-3054-01001-300A-A (A330-A-44-XX-3054-01ZZZ-300Z-A)
Do a GVI of the PANASONIC Adapter Plate with a DPA
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
260 Work location From Frame 60 to Frame 65
Referenced Information
Manuals/Drawings References/Sheets
AMM 06-20-00, Page Block 0006-31-53, Page Block 00
VSB PANASONIC AVIONICS CORPORATION (1UL05)VSB RDAA903194-01-44-00
Procedure
(a) Standard practices given in this procedure:
1 For the Frame (FR) identification, refer to Ref. AMM 06-31-53, Page Block
00.
2 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 00.
(b) Do a GVI of the PANASONIC adapter plate with a DPA in accordance with Ref.
PANASONIC AVIONICS CORPORATION (1UL05) VSB RDAA903194-01-44-00.
1 If crack or corrosion is found:
a Perform the corrective action as described in Ref. PANASONIC
AVIONICS CORPORATION (1UL05) VSB RDAA903194-01-44-00.

### Page 16

A330
SERVICE BULLETIN
REV 00 Dec 22/23 A330-44-3054
Page 16
b After completion of all inspections, complete and send the Inspection
Report sheet in accordance with Ref. T ask A330-A-44-XX-3054-01ZZZ-
90AZ-A.
c No further action.
2 If no crack nor corrosion is found:
a After completion of all inspections, complete and send the Inspection
Report sheet in accordance with Ref. T ask A330-A-44-XX-3054-01ZZZ-
90AZ-A.
b No further action.
CONF 002
(2) Task A330-A-44-XX-3054-02002-300A-A (A330-A-44-XX-3054-02ZZZ-300Z-A)
Do a GVI of the PANASONIC Adapter Plate with a SPA
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
260 Work location From Frame 60 to Frame 65
Referenced Information
Manuals/Drawings References/Sheets
AMM 06-20-00, Page Block 0006-31-53, Page Block 00
VSB PANASONIC AVIONICS CORPORATION (1UL05)VSB RDAA903528-01-44-00
Procedure
(a) Standard practices given in this procedure:
1 For the Frame (FR) identification, refer to Ref. AMM 06-31-53, Page Block
00.
2 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 00.
(b) Do a GVI of the PANASONIC adapter plate with a SPA in accordance with Ref.
PANASONIC AVIONICS CORPORATION (1UL05) VSB RDAA903528-01-44-00.
1 If crack or corrosion is found:
a Perform the corrective action as described in Ref. PANASONIC
AVIONICS CORPORATION (1UL05) VSB RDAA903528-01-44-00.
b After completion of all inspections, complete and send the Inspection
Report sheet in accordance with Ref. T ask A330-A-44-XX-3054-01ZZZ-
90AZ-A.
c No further action.
2 If no crack nor corrosion is found:
a After completion of all inspections, complete and send the Inspection
Report sheet in accordance with Ref. T ask A330-A-44-XX-3054-01ZZZ-
90AZ-A.

### Page 17

A330
SERVICE BULLETIN
REV 00 Dec 22/23 A330-44-3054
Page 17
b No further action.
CONF ALL
(3) Task A330-A-44-XX-3054-01001-90AA-A (A330-A-44-XX-3054-01ZZZ-90AZ-A)
Complete and Send the Inspection Report Sheet
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.10 h
Minimum Number of person 1
Elapsed Time 0.10 h
Referenced Information
Manuals/Drawings References/Sheets
ISI 00.00.00179
Procedure
(a) Complete the Inspection Report sheet, refer to Ref. Fig.RA Inspection Report.
(b) Send the completed Inspection Report sheet in accordance with Ref. ISI
00.00.00179.

### Page 18

A330
SERVICE BULLETIN
Figure ICN-A330-A-44XX3054-A-FAPE3-01HKF-A-002-01 Fig.RA Sol.AA SHEET 1/1
REV 00 Dec 22/23 A330-44-3054Inspection Report
Page 18
CONF ALL
INSPECTION REPORT
SERVICE BULLETIN No :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A330-44-3054
DATE OF INSPECTION :
INSPECTION METHOD : GENERAL VISUAL
INSPECTION
SHEET IN ACCORDANCE WITH ISI 00.00.00179
SEND THE COMPLETED INSPECTION REPORT
PROCEDURE INSPECTION RESULT
YES NO
YES NOCHECK FOR CRACKS ON PANASONICADAPTION PLATE-KIT FOR SPA
CHECK FOR CRACKS ON PANASONIC
ADAPTION PLATE-KIT FOR DPA
PROCEDURE INSPECTION RESULT
YES NO
YES NO
CHECK FOR CORROSION ON PANASONIC
ADAPTION PLATE-KIT FOR DPA
CHECK FOR CORROSION ON PANASONIC
ADAPTION PLATE-KIT FOR SPA
ICN-A330-A-44XX3054-A-FAPE3-01HKF-A-002-01

### Page 19

A330
SERVICE BULLETIN
REV 00 Dec 22/23 A330-44-3054
Page 19
D. PREPARATION FOR TEST
None
E. TEST
None
F. CLOSE-UP
CONF 001
(1) Task A330-A-44-XX-3054-01001-740A-A (A330-A-44-XX-3054-01ZZZ-740Z-A)
Close-Up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.50 h
Minimum Number of person 1
Elapsed Time 1.50 h
Referenced Information
Manuals/Drawings References/Sheets
AMM T ask 44-33-22-400-801
VSB PANASONIC AVIONICS CORPORATION (1UL05)VSB RDAA903194-01-44-00
Procedure
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) For the installation of the antenna radome, refer to Ref. PANASONIC AVIONICS
CORPORATION (1UL05) VSB RDAA903194-01-44-00.
(c) Do the close-up procedure as specified in the installation of the antenna radome,
refer to Ref. AMM T ask 44-33-22-400-801.
(d) Remove the access platforms.
(e) Put the aircraft back to its initial configuration.
CONF 002
(1) Task A330-A-44-XX-3054-01002-740A-A (A330-A-44-XX-3054-01ZZZ-740Z-A)
Close-Up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.50 h
Minimum Number of person 1
Elapsed Time 1.50 h
Referenced Information
Manuals/Drawings References/Sheets
AMM T ask 44-33-22-400-801
VSB PANASONIC AVIONICS CORPORATION (1UL05)VSB RDAA903528-01-44-00
Procedure

### Page 20

A330
SERVICE BULLETIN
REV 00 Dec 22/23 A330-44-3054
Page 20
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) For the installation of the antenna radome, refer to Ref. PANASONIC AVIONICS
CORPORATION (1UL05) VSB RDAA903528-01-44-00.
(c) Do the close-up procedure as specified in the installation of the antenna radome,
refer to Ref. AMM T ask 44-33-22-400-801.
(d) Remove the access platforms.
(e) Put the aircraft back to its initial configuration.
CONF ALL
G. ADMINISTRATIVE
(1) Task A330-A-44-XX-3054-02001-90AA-A (A330-A-44-XX-3054-02ZZZ-90AZ-A)
Administrative
Procedure
Confirm in the applicable aircraft records that you have completed all the work defined
in this Service Bulletin task set as required.

### Page 21

A330
SERVICE BULLETIN
APPENDIX
REV 00 Dec 22/23 A330-44-3054
Page 21
APPENDIX
A. ACCOMPLISHMENT TIMESCALE
Accomplishment Timescale
For an explanation of the accomplishment timescale, refer to the next page.

### Page 22

A330
SERVICE BULLETIN
APPENDIX
Figure ICN-A330-A-44XX3054-A-FAPE3-01HLM-A-001-01 Fig.AA Sol.AA SHEET 1/1
REV 00 Dec 22/23 A330-44-3054Accomplishment Timescale
Page 22
CONF ALL
Accomplish a General Visual Inspection (GVI) of each affected part in accordance with the instructions of the
SB, within x months as indicated in the Table below
1) Antenna system embodiment before or at the date of SB publication
OR, within 36 months since last accomplishment of radome opening due to antenna repair or equivalent
inspection in accordance with PAC instructions, whichever comes later and, thereafter, at intervals not to
Group Affected Aircraft Population
A Up to 3 years since date of Antenna system embodiment Within 36 months
Compliance Time from SB
publication date
Within 24 monthsB
Within 18 monthsC
Within 12 monthsD
Within 9 monthsE
Within 6 monthsMore than 8 years since date of Antenna system embodimentF
More than 3 and up to 5 years since date of Antenna system
embodiment
More than 5 and up to 6 years since date of Antenna system
embodiment
More than 6 and up to 7 years since date of Antenna system
embodiment
More than 7 and up to 8 years since date of Antenna system
embodiment
exceed 36 months.
2) Antenna system embodiment after the date of SB publication
Accomplish a General Visual Inspection (GVI) of each affected part in accordance with the instructions of the
SB, within 36 months since the date of Antenna system embodiment and, thereafter, at intervals not to exceed
36 months.
GRACE PERIOD (Y/N): N/A
REPETITIVE INSPECTION : YES
MONITORING AT FIRST INSPECTION: YES
NOTE: A GENERAL VISUAL INSPECTION (GVI) HAS TO BE DONE AT INTERVALS NOT TO EXCEED
36 MONTHS, AFTER THE FIRST INSPECTION. NEW INSPECTIONS WILL NOT BE MONITORED
BY AIRBUS.
ICN-A330-A-44XX3054-A-FAPE3-01HLM-A-001-01

### Page 23

A330
SERVICE BULLETIN
APPENDIX
REV 00 Dec 22/23 A330-44-3054
Page 23
B. REPORTING SHEET
TITLE: CABIN SYSTEM - BROADBAND COMMUNICATION SYSTEM -
INSPECTION - PANASONIC ADAPTER PLATE
MODIFICATION No.: None
(1) SB Reporting status
This Service Bulletin will only be incorporated into affected customized Maintenance
and Flight Operations Products if it is duly reported to Airbus.
(2) GENERAL information
The SB Reporting policy is published in ISI 00.00.00135. This document provides
information regarding: the SB Reporting means and benefits, the update of
customized Maintenance Products and customized Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations
Products" for further information on the update of affected Flight Operations Products.
(3) SB Reporting procedure
Standard practice to report SB is to use the online reporting application on
AirbusWorld.
Refer to ISI 00.00.00179:
- For complete information on reporting means to Airbus, Question 2 "What are
the standard practices for SB Reporting?"
- If this SB requires previous or simultaneous accomplishment of other SBs,
Question 3 "What about the reporting of prerequisite Service Bulletins?"
NOTE: ISI 00.00.00179 covers all the frequently asked questions about SB Reporting.
It is revised on a regular basis.

### Page 24

A330
SERVICE BULLETIN
APPENDIX
REV 00 Dec 22/23 A330-44-3054
Page 24
C. QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin.
The reported data that you provide us will be used to analyse areas of difficulties and to
take corrective action to further improve the quality of our Service Bulletin.
We thank you for the time you have taken in completing this form.
Quality rating of this SB 4 3 2 1
Quality rating of the Accomplishment Instructions 4 3 2 1
Quality rating of the Illustrations 4 3 2 1
Is this SB easy to understand ? Y / N
NOTE: Please rate on a scale of 1 to 4, with 4 being the highest score
If you have difficulties in the accomplishment of this SB please quote below the area(s) and
give a short description of the issue.
Planning Material Instructions
X Applicability X T ooling X Preparation
X Reason X List of Materials
Operator Supplied
X Mod/Inspection
X Manpower X Kit content X T est
X References X Re-identification X Close-up
X Publication X Illustrations
X Industry Support
Comments :
Operator : Date :
Name/Title
Please return this form to :
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
Or via your Resident Customer Support Office.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
