# Airbus Service Bulletin A330-53-3325

Copy: No revision named ("A330-53-3325"), 24 pages: PDF https://openairdocs.org/files/sha256/19/07/1907e5a5854d652cc22985c0c26dbb15774d05540998124561c80dedfbbcc58d; text https://openairdocs.org/service-documents/airbus/a330-53-3325/file/1907e5a5854d.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2025-3988, the docket of AD 2026-10-13. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A330-53-3325
- Page: https://openairdocs.org/service-documents/airbus/a330-53-3325

## Text (24 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2025-3988, the docket of AD 2026-10-13. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

A330
SERVICE BULLETIN
REV 00 Feb 13/25 A330-53-3325
Page 1
CONF ALL
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
 
The content of this document is the property of Airbus. All rights including copyrights are reserved.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
MANDATORY MANDATORY MANDATORY
ATA SYSTEM: 53
TITLE: FUSELAGE - NOSE FORWARD FUSELAGE - INSPECT THE WINDSHIELD
CENTRAL LOWER FRAMING FILLET RADIUS, LH AND RH
MODIFICATION No.:
None

### Page 2

A330
SERVICE BULLETIN
SUMMARY
REV 00 Feb 13/25 A330-53-3325
Page 2
ATA SYSTEM: 53
TITLE: FUSELAGE - NOSE FORWARD FUSELAGE - INSPECT THE WINDSHIELD
CENTRAL LOWER FRAMING FILLET RADIUS, LH AND RH
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
B. REASON
(1) History
From 2008, hand shot-peening was replaced by automatic shot-peening on different
parts of the LR program. A wrong shot peening programming was identified where
the shot-peening parameters were not in compliance with the manufacturing process
requirements. The improper application of automatic shot peening results in a
reduction of the fatigue potentials in the area where the benefit of shot peening is
expected.
(2) Objective/Action
This Service Bulletin is issued to do a HFEC inspection of the windshield central lower
framing fillet radius, LH and RH sides.
(3) Advantages
Accomplishment of this ISB will permit early detection of cracks on the windshield
frontal framing and will contribute to maintain the structural integrity of the area.
(4) Operational/Maintenance Consequences
None
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO
A/C OPERATION
AFFECTED
NO VENDOR SB NO
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD YES
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
NOTE: Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION

### Page 3

A330
SERVICE BULLETIN
SUMMARY
REV 00 Feb 13/25 A330-53-3325
Page 3
No specific aircraft maintenance configuration required.
E. MATERIAL PRICE INFORMATION
(1) Inspection of the Windshield Central Lower Framing Fillet Radius
(a) T ask set A330-A-53-XX-3325-01000-93BA-A Inspection of the Windshield Central
Lower Framing Fillet Radius
No material
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
09K 12P 15T 18P 28M 49O 56K 68M 78U 79E 79L 82J 82M 82W 82Z 83Q 89G 90U 91J 96U
98W 99Y AAL AAR AAW ABR ACA ACI AFL AHK AIB ALK ARG ASL ASY AZA AZU BCS BEL BOV
BRS BTK CAL CBJ CCA CEB CES CFC CFG CHH CMA CPA CRK CRL CSC CSN CSZ CTV DAH DAL
DLH DQA EIN EUK EVA EVE F1I FAF FIN FJI FWI GCR GIA HAL HFM HKC HUA HYS I5S IAW IBE
IRA ITY KAC KAL KAY KLM KNE LAA LKE LNI LVL LVU LYX MAA MAS MAU MEA MMF MNB MSR
MXD NCR NWS OBS OCN OMA PAL PLM PVG QFA QNT RNA RSF RSY RWD SAA SAF SAS SMF
STW SVA SWR SZN TAP TAR TBA THA THY TOW TPA TSC TWB UAF UBG UGD UZS VIR VJC
VKG WFL WIN WPT XAX
G. CONCURRENT REQUIREMENTS
None
H. NATURE OF THE WORK
(1) Inspection of the Windshield Central Lower Framing Fillet Radius
(a) T ask set A330-A-53-XX-3325-01000-93BA-A Inspection of the Windshield Central
Lower Framing Fillet Radius
AIRCRAFT YES
EQUIPMENT NO
I. MANPOWER
(1) Inspection of the Windshield Central Lower Framing Fillet Radius
(a) T ask set A330-A-53-XX-3325-01000-93BA-A Inspection of the Windshield Central
Lower Framing Fillet Radius
MANPOWER
TOTAL MAN-HOURS 3.75 h
ELAPSED TIME (HOURS) 3.75 h

### Page 4

A330
SERVICE BULLETIN
SUMMARY
Figure ICN-A330-A-53XX3325-A-FAPE3-01JI5-A-002-01 Fig.SA Sol.AA SHEET 1/1
REV 00 Feb 13/25 A330-53-3325General Overview
Page 4
J. GENERAL OVERVIEW
CONF ALL
B
INSPECTION OF THE WINDSHIELD
CENTRAL LOWER FRAMING FILLET
RADIUS, RH SIDE
C
INSPECTION OF THE WINDSHIELD
CENTRAL LOWER FRAMING FILLET
RADIUS, LH SIDE
B
C
Z210
A
A
FR11
FR1
FR20
ICN-A330-A-53XX3325-A-FAPE3-01JI5-A-002-01

### Page 5

A330
SERVICE BULLETIN
REV 00 Feb 13/25 A330-53-3325
Page 5
ATA SYSTEM: 53
TITLE: FUSELAGE - NOSE FORWARD FUSELAGE - INSPECT THE WINDSHIELD
CENTRAL LOWER FRAMING FILLET RADIUS, LH AND RH
1. PLANNING INFORMATION
A. APPLICABILITY
NOTE: This Service Bulletin is only applicable for aircraft on which central windshield
frames PNs F5312301220000 and F5312301120000 are installed on the LH and RH
sides.
(1) Models
ON A/C 1094, 1123, 1135, 1169, 1174, 1198, 1218, 1225, 1235, 1251, 1252, 1258, 1283,
1308, 1313, 1321, 1327, 1339, 1354, 1365, 1379, 1412, 1472, 1478, 1505, 1516, 1543,
1605, 1613, 1623, 1630, 1649, 1694, 1700, 1710, 1719, 1728, 1736, 1737, 1740, 1747,
1748, 1755, 1761, 1777, 1784, 1835, 1854, 1864, 1877, 1882, 1932, 1936
330-202
ON A/C 1161, 1183
330-203
ON A/C 1096, 1112, 1116, 1118, 1133, 1155, 1200, 1202, 1203, 1213, 1220, 1221, 1233,
1256, 1266, 1297, 1309, 1335, 1393
330-223
ON A/C 1136, 1148, 1164, 1180
330-223F
ON A/C 1095, 1100, 1104, 1114, 1120, 1138, 1159, 1171, 1184, 1186, 1191, 1208, 1210,
1214, 1217, 1223, 1224, 1227, 1236, 1237, 1240, 1241, 1248-1250, 1259-1262, 1267, 1271,
1275, 1277, 1279, 1280, 1282, 1286, 1288, 1291, 1293, 1295, 1302-1304, 1306, 1310, 1312,
1316, 1319, 1322, 1324, 1330, 1331, 1334, 1342, 1363, 1364, 1372, 1375, 1389, 1390,
1394, 1396, 1399, 1400, 1402, 1404, 1407, 1410, 1415-1417, 1419, 1421, 1422, 1429, 1434,
1439-1441, 1444, 1451, 1452, 1455, 1459, 1461, 1465, 1466, 1468, 1469, 1471, 1474, 1479,
1480, 1484, 1486, 1488, 1492, 1496, 1498, 1500, 1502, 1508, 1511, 1512, 1520, 1521,
1526, 1530, 1537, 1540, 1547, 1555, 1558, 1561, 1565, 1569, 1573, 1586, 1588, 1591,
1601, 1603, 1606, 1608, 1610, 1615, 1617, 1626, 1631, 1639, 1641, 1643, 1653, 1655,
1657, 1662, 1664, 1667, 1672, 1676, 1678, 1681, 1725, 1730, 1732, 1735, 1741, 1746,
1751, 1756, 1758, 1762, 1771, 1773, 1775, 1780, 1782, 1785, 1787, 1799, 1805, 1808,
1822, 1823, 1830, 1845, 1847, 1848, 1857, 1859, 1872, 1878, 1883, 1886, 1891, 1911,
1916, 1919, 1942, 1945, 1960, 1965, 1968, 1982, 1989, 1998
330-243
ON A/C 1092, 1115, 1175, 1320, 1332, 1344, 1350, 1368, 1380, 1386, 1406, 1414, 1418,
1428, 1442, 1448, 1506, 1524, 1534, 1550, 1578, 1584, 1594, 1688, 1708, 1722, 1750,
1768, 1772
330-243F
ON A/C 1106, 1173, 1177, 1254, 1268, 1272, 1274, 1278, 1346, 1351, 1361, 1367, 1370,
1377, 1385, 1391, 1405, 1426, 1437, 1450, 1490, 1499, 1507, 1515, 1535, 1539, 1627,
1628, 1637, 1679, 1684, 1690, 1701, 1716, 1720, 1721, 1742, 1744, 1767, 1769, 1778,
1783, 1791, 1794, 1806, 1817, 1950, 1951
330-302
ON A/C 1287, 1294, 1300, 1360, 1381, 1458, 1476, 1487, 1501, 1514, 1529, 1571, 1580,
1616, 1620, 1622, 1629, 1640, 1642, 1644, 1696, 1704, 1706, 1713, 1718
330-303

### Page 6

A330
SERVICE BULLETIN
REV 00 Feb 13/25 A330-53-3325
Page 6
ON A/C 1151, 1209, 1211, 1219, 1229, 1234, 1243, 1265, 1281, 1318, 1326, 1336, 1337,
1340, 1347, 1388, 1392, 1395, 1425, 1430, 1431, 1435, 1464, 1470, 1489, 1494, 1518,
1519, 1536, 1556, 1575, 1576, 1590, 1593, 1611, 1625, 1636, 1638, 1645, 1647, 1699,
1714, 1727, 1760, 1776, 1793
330-323
ON A/C 1163
330-342
ON A/C 1093, 1097-1099, 1101, 1103, 1105, 1107, 1108, 1110, 1124, 1126, 1127, 1130-
1132, 1137, 1141, 1143, 1145-1147, 1149, 1150, 1153, 1156, 1157, 1160, 1165, 1167, 1168,
1170, 1172, 1178, 1181, 1187-1190, 1192, 1193, 1195, 1196, 1199, 1201, 1204-1206, 1212,
1215, 1216, 1222, 1226, 1228, 1230-1232, 1238, 1239, 1245-1247, 1255, 1263, 1264, 1269,
1270, 1276, 1284, 1285, 1289, 1290, 1292, 1296, 1298, 1299, 1301, 1305, 1307, 1311,
1314, 1315, 1317, 1323, 1325, 1328, 1329, 1333, 1338, 1341, 1343, 1345, 1348, 1349,
1352, 1353, 1355-1359, 1362, 1366, 1369, 1371, 1373, 1374, 1376, 1378, 1382-1384, 1387,
1397, 1398, 1401, 1403, 1408, 1409, 1411, 1413, 1420, 1423, 1427, 1432, 1433, 1436,
1438, 1443, 1445-1447, 1449, 1453, 1454, 1456, 1457, 1460, 1462, 1463, 1467, 1473, 1475,
1477, 1481-1483, 1485, 1491, 1493, 1495, 1497, 1503, 1504, 1509, 1510, 1513, 1517, 1523,
1525, 1527, 1528, 1531-1533, 1538, 1541, 1542, 1544-1546, 1548, 1549, 1551-1554, 1557,
1559, 1560, 1562-1564, 1566-1568, 1570, 1572, 1574, 1577, 1579, 1581-1583, 1585, 1587,
1589, 1592, 1595-1600, 1602, 1604, 1607, 1609, 1612, 1614, 1618, 1619, 1621, 1624, 1632-
1635, 1646, 1648, 1650, 1651, 1654, 1656, 1658-1660, 1663, 1665, 1666, 1668-1671, 1673-
1675, 1677, 1680, 1685-1687, 1689, 1691-1693, 1695, 1697, 1698, 1703, 1709, 1711, 1712,
1715, 1723, 1724, 1726, 1729, 1731, 1733, 1734, 1738, 1739, 1743, 1745, 1749, 1752-1754,
1757, 1759, 1763-1766, 1770, 1774, 1779, 1781, 1786, 1788-1790, 1792, 1796-1798, 1800-
1804, 1807, 1809-1812, 1814-1816, 1818, 1820, 1821, 1825-1829, 1831-1833, 1837-1843,
1846, 1849, 1851, 1852, 1855, 1856, 1858, 1860, 1862, 1863, 1865-1869, 1871, 1873-1875,
1879-1881, 1885, 1889, 1893, 1894, 1896, 1898, 1899, 1902, 1905, 1907, 1912, 1917, 1928
330-343
ON A/C 1888, 1964, 1969, 1977, 1979
330-841
ON A/C 1819, 1836, 1844, 1850, 1861, 1870, 1876, 1884, 1887, 1890, 1892, 1895, 1897,
1900, 1901, 1903, 1904, 1906, 1908-1910, 1913-1915, 1918, 1920-1927, 1929, 1931, 1933-
1935, 1937-1939, 1941, 1943, 1946-1949, 1952-1954, 1956-1959, 1961-1963, 1966, 1967,
1970-1973, 1975, 1976, 1978, 1981, 1983, 1984, 1986-1988, 1990-1997
330-941
CONF ALL
(2) Applicability by MSN
1092-1101 1103-1108 1110 1112 1114-1116 1118 1120 1123 1124 1126 1127 1130-
1133 1135-1138 1141 1143 1145-1151 1153 1155-1157 1159-1161 1163-1165 1167-
1175 1177 1178 1180 1181 1183 1184 1186-1193 1195 1196 1198-1206 1208-1241
1243 1245-1252 1254-1256 1258-1272 1274-1423 1425-1521 1523-1651 1653-1660
1662-1681 1684-1701 1703 1704 1706 1708-1716 1718-1794 1796-1812 1814-1823
1825-1833 1835-1852 1854-1929 1931-1939 1941-1943 1945-1954 1956-1973 1975-
1979 1981-1984 1986-1998
(3) MSN by configuration
MSN CONFIGURATION
1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1103
1104 1105 1106 1107 1108 1110 1112 1114 1115 1116 1118
1120 1123 1124 1126 1127 1130 1131 1132 1133 1135 1136
1137 1138 1141 1143 1145 1146 1147 1148 1149 1150 1151
1153 1155 1156 1157 1159 1160 1161 1163 1164 1165 1167
001

### Page 7

A330
SERVICE BULLETIN
REV 00 Feb 13/25 A330-53-3325
Page 7
MSN CONFIGURATION
1168 1169 1170 1171 1172 1173 1174 1175 1177 1178 1180
1181 1183 1184 1186 1187 1188 1189 1190 1191 1192 1193
1195 1196 1198 1199 1200 1201 1202 1203 1204 1205 1206
1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218
1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229
1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240
1241 1243 1245 1246 1247 1248 1249 1250 1251 1252 1254
1255 1256 1258 1259 1260 1261 1262 1263 1264 1265 1266
1267 1268 1269 1270 1271 1272 1274 1275 1276 1277 1278
1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289
1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300
1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311
1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322
1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333
1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344
1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355
1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366
1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377
1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388
1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399
1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410
1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421
1422 1423 1425 1426 1427 1428 1429 1430 1431 1432 1433
1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444
1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455
1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466
1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477
1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488
1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499
1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510
1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521
1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533
1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544
1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555
1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566
1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577
1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588
1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599
1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610
1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621
1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632
1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643
1644 1645 1646 1647 1648 1649 1650 1651 1653 1654 1655
1656 1657 1658 1659 1660 1662 1663 1664 1665 1666 1667
1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678
1679 1680 1681 1684 1685 1686 1687 1688 1689 1690 1691
1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1703
1704 1706 1708 1709 1710 1711 1712 1713 1714 1715 1716
1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728
1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739
1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750
1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761
1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772
1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783
1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794

### Page 8

A330
SERVICE BULLETIN
REV 00 Feb 13/25 A330-53-3325
Page 8
MSN CONFIGURATION
1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806
1807 1808 1809 1810 1811 1812 1814 1815 1816 1817 1818
1819 1820 1821 1822 1823 1825 1826 1827 1828 1829 1830
1831 1832 1833 1835 1836 1837 1838 1839 1840 1841 1842
1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1854
1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865
1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876
1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887
1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898
1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909
1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920
1921 1922 1923 1924 1925 1926 1927 1928 1929 1931 1932
1933 1934 1935 1936 1937 1938 1939 1941 1942 1943 1945
1946 1947 1948 1949 1950 1951 1952 1953 1954 1956 1957
1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968
1969 1970 1971 1972 1973 1975 1976 1977 1978 1979 1981
1982 1983 1984 1986 1987 1988 1989 1990 1991 1992 1993
1994 1995 1996 1997 1998
(4) Configuration definition
Configuration 001
CONF 001 is applicable for all the aircraft affected by this Service Bulletin as a
standard configuration.
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
From 2008, hand shot-peening was replaced by automatic shot-peening on different
parts of the LR program. A wrong shot peening programming was identified where
the shot-peening parameters were not in compliance with the manufacturing process
requirements. The improper application of automatic shot peening results in a
reduction of the fatigue potentials in the area where the benefit of shot peening is
expected.
(2) Objective/Action
This Service Bulletin is issued to do a HFEC inspection of the windshield central lower
framing fillet radius, LH and RH sides.
(3) Advantages
Accomplishment of this ISB will permit early detection of cracks on the windshield
frontal framing and will contribute to maintain the structural integrity of the area.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
T o accomplish this Service Bulletin it is necessary to:
(1) Inspection of the Windshield Central Lower Framing Fillet Radius
(a) T ask set A330-A-53-XX-3325-01000-93BA-A Inspection of the Windshield Central
Lower Framing Fillet Radius

### Page 9

A330
SERVICE BULLETIN
REV 00 Feb 13/25 A330-53-3325
Page 9
1 Do a SDI of the Windshield Central Lower Framing Fillet Radius on LH and
RH Sides
2 Complete and Send the Inspection Report Sheet
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
Accomplishment of this Service Bulletin must be done in accordance with the
timescale given in the table below.
This Service Bulletin has been classified Mandatory. It is expected that an
Airworthiness Directive (AD) published by the European Union Aviation Safety Agency
(EASA) will be issued to confirm this classification. It is anticipated that the AD will
confirm the thresholds and/or intervals given below but reference should be made to
the AD for confirmation of the mandated accomplishment timescale.
T able 1, CONF 001 - SDI of the Windshield Central Lower Framing Fillet Radius on LH
and RH sides
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
All aircraft Do a SDI of
the windshield
central lower
framing fillet
radius on LH
and RH sides in
accordance with
Ref. T ask A330-
A-53-XX-3325-
01ZZZ-353Z-A
Before 27490
Flight Cycle(s)
from aircraft
first flight
None None
If crack(s)
is found
After you
complete of all
inspections,
complete
and send the
inspection
report sheet in
accordance with
Ref. T ask A330-
A-53-XX-3325-
02ZZZ-90AZ-A
Before next flight None None
  and
  Contact AIRBUS
and obey the
instructions
given by AIRBUS
Before next flight None None
If no crack(s)
is found
After you
complete of all
inspections,
complete
and send the
Before next flight None None

### Page 10

A330
SERVICE BULLETIN
REV 00 Feb 13/25 A330-53-3325
Page 10
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
inspection
report sheet in
accordance with
Ref. T ask A330-
A-53-XX-3325-
02ZZZ-90AZ-A
Repeat the
inspection in
accordance
with Ref. T ask
set A330-A-
53-XX-3325-
01ZZZ-93BZ-A
None None 27490 Flight
Cycle(s)
F. APPROVAL
The technical content of this document is approved under the authority of the Design
Organisation Approval ref. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Inspection of the Windshield Central Lower Framing Fillet Radius
(a) T ask set A330-A-53-XX-3325-01000-93BA-A Inspection of the Windshield Central
Lower Framing Fillet Radius
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Do a SDI of the Windshield Central Lower Framing Fillet
Radius on LH and RH Sides
0.50 h
Complete and Send the Inspection Report Sheet 0.25 h
PREPARATION FOR TEST
Install the DU 1.50 h
TEST
T est 0.25 h
CLOSE-UP
Close-up 0.25 h
TOTAL MAN-HOURS 3.75 h
ELAPSED TIME (HOURS) 3.75 h

### Page 11

A330
SERVICE BULLETIN
REV 00 Feb 13/25 A330-53-3325
Page 11
H. WEIGHT AND BALANCE
Not changed
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
(1) Inspection of the Windshield Central Lower Framing Fillet Radius
(a) T ask set A330-A-53-XX-3325-01000-93BA-A Inspection of the Windshield Central
Lower Framing Fillet Radius
AIRCRAFT MAINTENANCE MANUAL (AMM)
06-20-00, Page Block 00 06-31-53, Page Block 00
T ask 12-34-24-860-802 T ask 31-63-22-000-801
T ask 31-63-22-400-801
CONSUMABLE MATERIAL LIST (CML)
See manual
ELECTRICAL STANDARD PRACTICES MANUAL (ESPM)
20-55-00
IN SERVICE INFORMATION (ISI)
00.00.00179 00.00.00217
NON DESTRUCTIVE TEST MANUAL (NTM)
53-11-99
OPERATOR INFORMATION TELEX (OIT)
999.0066/15
TECHNICAL FOLLOW UP (TFU)
53.11.00033
K. PUBLICATION AFFECTED
NON DESTRUCTIVE TEST MANUAL (NTM)
See manual
L. INDUSTRY SUPPORT INFORMATION
AIRBUS will not provide industry support for accomplishment of this Service Bulletin.

### Page 12

A330
SERVICE BULLETIN
REV 00 Feb 13/25 A330-53-3325
Page 12
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
Material for task set A330-A-53-XX-3325-01000-93BA-A Inspection of the
Windshield Central Lower Framing Fillet Radius
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
B. TOOLING
Referenced tools for task set A330-A-53-XX-3325-01000-93BA-A Inspection of the
Windshield Central Lower Framing Fillet Radius
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. NTM 53-11-99
C. CONSUMABLES
Consumables for task set A330-A-53-XX-3325-01000-93BA-A Inspection of the
Windshield Central Lower Framing Fillet Radius
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
08BAA9 Non Aqueous Cleaner -General
14SBA1 T extile - Lint free Cotton
D. LIST OF NEW PARTS
No parts
E. LIST OF EXISTING PARTS
No parts

### Page 13

A330
SERVICE BULLETIN
REV 00 Feb 13/25 A330-53-3325
Page 13
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A330-A-53-XX-3325-01000-93BA-A (A330-A-53-XX-3325-01ZZZ-93BZ-A)
Inspection of the Windshield Central Lower Framing Fillet Radius
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO A MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESPM 20-55-00.
NOTE: Section 3. includes procedures given in other documents or in other sections of this
Service Bulletin.
- You must obey the given procedure when the words "in accordance with" are used.
- You can use an accepted alternative procedure only when the words "refer to" are
used and you have a procedure that is accepted by the related local authority.
NOTE: T o add flexibility to your maintenance operations you can select to ignore steps or add
steps from paragraphs 3.B., 3.D., and 3.F . of section 3. as long as:
- you can do paragraphs 3.C. and 3.E.,
- and the technical intent of the Service Bulletin is met within the set parameters,
- and you can put the aircraft back into a serviceable condition.
NOTE: In section 3., the names of the manuals are given with their related acronyms. Refer to
the paragraph "1.J., References" for the definition of acronyms.
NOTE: This Service Bulletin is classified Mandatory or expected to be classified Mandatory by
an Airworthiness Directive (AD), paragraphs 3.C. and 3.E. of section 3. are Required for
Compliance (RC) and you must do them to comply with the AD.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations from the instructions, including the Required for Compliance (RC)
paragraphs contained in this Service Bulletin, contact AIRBUS for further instructions and
approval.
NOTE: The flowcharts supplement the information given in paragraphs "3.C. PROCEDURE"
and "1.E. COMPLIANCE". The flowcharts are not the primary source for the tasks or the
compliance times given in this Service Bulletin.
A. TASK SET ASSOCIATED INFORMATION
Task Manpower
TOTAL MAN-HOURS 3.75 h
ELAPSED TIME (HOURS) 3.75 h
B. PREPARATION
(1) Task A330-A-53-XX-3325-01001-540A-A (A330-A-53-XX-3325-01ZZZ-540Z-A)
Job Set-up

### Page 14

A330
SERVICE BULLETIN
REV 00 Feb 13/25 A330-53-3325
Page 14
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Referenced Information
Manuals/Drawings References/Sheets
AMM T ask 12-34-24-860-802T ask 31-63-22-000-801
Procedure
NOTE: For the basic aircraft configuration, refer to AMM Chapter "Introduction -
Aircraft Status for Maintenance" in the Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to Ref. AMM T ask 12-34-
24-860-802.
(b) Remove the DU (FIN 2WK1), refer to Ref. AMM T ask 31-63-22-000-801.
NOTE: It is highly recommended to accomplish this ISB at a heavy maintenance
check.
C. PROCEDURE
(1) Task A330-A-53-XX-3325-01001-353A-A (A330-A-53-XX-3325-01ZZZ-353Z-A)
Do a SDI of the Windshield Central Lower Framing Fillet Radius on LH and RH
Sides
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
210 Work location From Frame FR1 to Frame FR11
Manpower/Resources/Skills
Man-hours 0.50 h
Minimum Number of person 1
Elapsed Time 0.50 h
Skills Non-Destructive T esting
Material necessary to do the job
Consumables
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
08BAA9 Non Aqueous Cleaner -General
14SBA1 T extile - Lint free Cotton
Referenced Information
Manuals/Drawings References/Sheets
AMM 06-20-00, Page Block 0006-31-53, Page Block 00

### Page 15

A330
SERVICE BULLETIN
REV 00 Feb 13/25 A330-53-3325
Page 15
Manuals/Drawings References/Sheets
CML CONSUMABLE MATERIAL LIST (CML)
ISI 00.00.00217
NTM 53-11-99
OIT 999.0066/15
Procedure
Ref. Fig.BA Inspection of the Windshield Central Lower Framing Fillet Radius on LH and
RH sides and Ref. Fig.FA Flowchart.
(a) Standard Practices given in this procedure:
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 00.
2 For the FR identification, refer to Ref. AMM 06-31-53, Page Block 00.
3 For the specification of consumable material application-codes given in this
Service Bulletin, refer to Ref. CML.
(b) Clean the inspection area, with:
  Non Aqueous Cleaner -
General
08BAA9  
and
  T extile - Lint free Cotton14SBA1  
(c) Do a HFEC inspection of the windshield central lower framing fillet radius (PNs
F5312301220000 and F5312301120000) on LH and RH sides in accordance
with Ref. NTM 53-11-99 at the threshold given in the PLANNING INFORMATION
paragraph 1.E.(2):
1 If crack(s) is found:
a After you complete of all inspections, complete and send the
Inspection Report sheet in accordance with Ref. T ask A330-A-
53-XX-3325-02ZZZ-90AZ-A at threshold given in the PLANNING
INFORMATION paragraph 1.E.(2).
NOTE: If there are findings, send a report to the responsible
authority and to AIRBUS in accordance with the regulations,
refer to AIRBUS Ref. OIT 999.0066/15 and Ref. ISI
00.00.00217.
b Contact AIRBUS before next flight and obey the instructions given by
AIRBUS.
2 If no crack(s) is found:
a After you complete of all inspections, complete and send the
Inspection Report sheet in accordance with Ref. T ask A330-A-
53-XX-3325-02ZZZ-90AZ-A at threshold given in the PLANNING
INFORMATION paragraph 1.E.(2).
NOTE: If there are findings, send a report to the responsible
authority and to AIRBUS in accordance with the regulations,
refer to AIRBUS Ref. OIT 999.0066/15 and Ref. ISI
00.00.00217.
b Repeat the inspection in accordance with Ref. T ask set A330-A-
53-XX-3325-01ZZZ-93BZ-A at the interval given in the PLANNING
INFORMATION paragraph 1.E.(2).

### Page 16

A330
SERVICE BULLETIN
Figure ICN-A330-A-53XX3325-A-FAPE3-01JI6-A-006-01 Fig.BA Sol.AA SHEET 1/1
REV 00 Feb 13/25 A330-53-3325Inspection of the Windshield Central Lower Framing Fillet Radius on LH and RH sides
Page 16
CONF ALL
B
C
01
C
NOTE:
DO A HFEC INSPECTION OF THE WINDSHIELD CENTRAL LOWER FRAMING FILLET
RADIUS IN ACCORDANCE WITH NTM TASK 53-11-99.
01
Z210
A
FR11
FR1
FR20
B
A
01
10 mm
(0.393 in)
20 mm
(0.787 in)
10 mm
(0.393 in)
20 mm
(0.787 in)
ICN-A330-A-53XX3325-A-FAPE3-01JI6-A-006-01

### Page 17

A330
SERVICE BULLETIN
Figure ICN-A330-A-53XX3325-A-FAPE3-01JI4-A-004-01 Fig.FA Sol.AA SHEET 1/1
REV 00 Feb 13/25 A330-53-3325Flowchart
Page 17
CONF ALL
IS CRACK(S) FOUND?
YES
NO
REPEAT THE INSPECTION 01
SEND THE INSPECTION
NOTE:
FOR THE ACCOMPLISHMENT TIMESCALE, REFER TO PARAGRAPH 1.E.(2).01
01
DO A SPECIAL DETAILED INSPECTION (SDI)
OF THE WINDSHIELD CENTRAL LOWER 
FRAMING FILLET RADIUS ON
LH AND RH SIDES 01
01REPORT SHEET
THE FLOWCHARTS SUPPLEMENT THE INFORMATION GIVEN IN PARAGRAPHS "3.C. PROCEDURE" AND
"1.E. COMPLIANCE". THE FLOWCHARTS ARE NOT THE PRIMARY SOURCE FOR THE TASKS OR THE
COMPLIANCE TIMES GIVEN IN THIS SERVICE BULLETIN.
COMPLETE AND SEND THE
INSPECTION REPORT SHEET
AFTER YOU COMPLETE OF ALL
INSPECTIONS, COMPLETE AND
CONTACT AIRBUS AND
OBEY THE INSTRUCTIONS
GIVEN BY AIRBUS
ICN-A330-A-53XX3325-A-FAPE3-01JI4-A-004-01

### Page 18

A330
SERVICE BULLETIN
REV 00 Feb 13/25 A330-53-3325
Page 18
(2) Task A330-A-53-XX-3325-02001-90AA-A (A330-A-53-XX-3325-02ZZZ-90AZ-A)
Complete and Send the Inspection Report Sheet
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h
Referenced Information
Manuals/Drawings References/Sheets
ISI 00.00.00179
Procedure
(a) Complete the Inspection Report sheet, refer to Ref. Fig.RA Inspection Report
sheet.
(b) Send the completed Inspection Report sheet in accordance with Ref. ISI
00.00.00179.
NOTE: T o send the Inspection Report sheet is not Required for Compliance (RC).

### Page 19

A330
SERVICE BULLETIN
Figure ICN-A330-A-53XX3325-A-FAPE3-01JI7-A-003-01 Fig.RA Sol.AA SHEET 1/1
REV 00 Feb 13/25 A330-53-3325Inspection Report sheet
Page 19
CONF ALL
INSPECTION REPORT
SERVICE BULLETIN No :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A330-53-3325
DATE OF INSPECTION :
INSPECTION METHOD : SPECIAL DETAILED
INSPECTION
SEND THE COMPLETED INSPECTION REPORT
SHEET IN ACCORDANCE WITH ISI 00.00.00179
INSPECTION OF THE WINDSHIELD CENTRAL LOWER FRAMING FILLET RADIUS 
A
B
Z210
INSPECTION
AREA
OPERATOR :
INSPECTION
NO CRACK FOUND
RESULTS
CRACK FOUND
CRACK FOUND CRACK LENGTH mm
CRACK LENGTH mm
FOLLOW-UP
ACTION
REPORT TO
AIRBUS
CHECK FOR 
THE CRACK(S)
ON WINDSHIELD
CENTRAL LOWER
FRAMING FILLET
RADIUS
LH
RH
A
B
INSPECTION
AREA
ICN-A330-A-53XX3325-A-FAPE3-01JI7-A-003-01

### Page 20

A330
SERVICE BULLETIN
REV 00 Feb 13/25 A330-53-3325
Page 20
D. PREPARATION FOR TEST
(1) Task A330-A-53-XX-3325-01001-720A-A (A330-A-53-XX-3325-01ZZZ-720Z-A)
Install the DU
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.50 h
Minimum Number of person 1
Elapsed Time 1.50 h
Referenced Information
Manuals/Drawings References/Sheets
AMM T ask 31-63-22-400-801
Procedure
(a) Install the DU (FIN 2WK1), refer to Ref. AMM T ask 31-63-22-400-801.
E. TEST
(1) Task A330-A-53-XX-3325-01001-320A-A (A330-A-53-XX-3325-01ZZZ-320Z-A)
Test
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h
Referenced Information
Manuals/Drawings References/Sheets
AMM T ask 31-63-22-400-801
Procedure
(a) Do the test procedure as specified in the installation of the DU (FIN 2WK1), refer
to Ref. AMM T ask 31-63-22-400-801.
F. CLOSE-UP
(1) Task A330-A-53-XX-3325-01001-740A-A (A330-A-53-XX-3325-01ZZZ-740Z-A)
Close-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h
Procedure
(a) Make sure that the work area is clean and clear of tools and other items.

### Page 21

A330
SERVICE BULLETIN
REV 00 Feb 13/25 A330-53-3325
Page 21
(b) Put the aircraft back to its initial configuration.
G. ADMINISTRATIVE
(1) Task A330-A-53-XX-3325-01001-90AA-A (A330-A-53-XX-3325-01ZZZ-90AZ-A)
Administrative
Procedure
Confirm in the applicable aircraft records that you completed all the work specified in
this Service Bulletin.

### Page 22

A330
SERVICE BULLETIN
APPENDIX
REV 00 Feb 13/25 A330-53-3325
Page 22
APPENDIX
A. GLOSSARY
Glossary
ACRONYM FULL FORM
DU Display Unit
FR Frame
HFEC High Frequency Eddy Current
ISB Inspection Service Bulletin
LH Left Hand
LR Long Range
RH Right Hand
SDI Special Detailed Inspection

### Page 23

A330
SERVICE BULLETIN
APPENDIX
REV 00 Feb 13/25 A330-53-3325
Page 23
B. REPORTING SHEET
TITLE: FUSELAGE - NOSE FORWARD FUSELAGE - INSPECT THE WINDSHIELD
CENTRAL LOWER FRAMING FILLET RADIUS, LH AND RH
MODIFICATION No.: None
(1) SB Reporting status
This Service Bulletin will only be incorporated into affected customized Maintenance
and Flight Operations Products if it is duly reported to Airbus.
(2) GENERAL information
The SB Reporting policy is published in ISI 00.00.00135. This document provides
information regarding: the SB Reporting means and benefits, the update of
customized Maintenance Products and customized Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations
Products" for further information on the update of affected Flight Operations Products.
(3) SB Reporting procedure
Standard practice to report SB is to use the online reporting application on
AirbusWorld.
Refer to ISI 00.00.00179:
- For complete information on reporting means to Airbus, Question 2 "What are
the standard practices for SB Reporting?"
- If this SB requires previous or simultaneous accomplishment of other SBs,
Question 3 "What about the reporting of prerequisite Service Bulletins?"
NOTE: ISI 00.00.00179 covers all the frequently asked questions about SB Reporting.
It is revised on a regular basis.

### Page 24

A330
SERVICE BULLETIN
APPENDIX
REV 00 Feb 13/25 A330-53-3325
Page 24
C. QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin.
The reported data that you provide us will be used to analyse areas of difficulties and to
take corrective action to further improve the quality of our Service Bulletin.
We thank you for the time you have taken in completing this form.
Quality rating of this SB 4 3 2 1
Quality rating of the Accomplishment Instructions 4 3 2 1
Quality rating of the Illustrations 4 3 2 1
Is this SB easy to understand ? Y / N
NOTE: Please rate on a scale of 1 to 4, with 4 being the highest score
If you have difficulties in the accomplishment of this SB please quote below the area(s) and
give a short description of the issue.
Planning Material Instructions
X Applicability X T ooling X Preparation
X Reason X List of Materials
Operator Supplied
X Mod/Inspection
X Manpower X Kit content X T est
X References X Re-identification X Close-up
X Publication X Illustrations
X Industry Support
Comments :
Operator : Date :
Name/Title
Please return this form to :
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
Or via your Resident Customer Support Office.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
