# Airbus Service Bulletin A330-78-3024

Copy: No revision named ("A330-78-3024 R00"), 22 pages: PDF https://openairdocs.org/files/sha256/a4/95/a495be0edc72931d2d01ae08dd437183104cdff2de76f483b01965a45c87672d; text https://openairdocs.org/service-documents/airbus/a330-78-3024/file/a495be0edc72.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-1063, the docket of AD 2019-06-08. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A330-78-3024
- Page: https://openairdocs.org/service-documents/airbus/a330-78-3024

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2019-06-08](https://openairdocs.org/ad/2019-06-08.md), effective May 16, 2019: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a330-78-3024/proposed.md).

## Text (22 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-1063, the docket of AD 2019-06-08. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A330
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 78
TITLE: EXHAUST - THRUST REVERSER - INSPECTION OF 6 O’CLOCK LATCH
BEAM GUSSETS BETWEEN FORWARD AND MIDDLE LATCH BEAM
LUGS FOR CRACKS ON PW4000 ENGINES
**CONF ALL
MODIFICATIONS
None
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
An operator has reported a crack found in the thrust reverser at middle gusset between L2 and L3 latch
attachment, adjacent to the after cascade frame attachment bracket in the 6 O’clock latch beam. This
damaged thrust reverser was pre-MOD No. 48539S16174 and only fitted on the A330 aircraft with
PRATT & WHITNEY engines.
Past experience has shown that such latch beam gusset crack surface showed indication of high
cycle fatigue, l eading to the issuance of the MOD No. 48539S16174 with the gu sset st eel doubler
reinforcement. This MOD No. 48539S16174 was retrofitted through the recommended modification
Service Bulletin No. A330-78-3014 and PRATT & WHITNEY Service Bulletin No. PW4G-100-78-78,
with a threshold of 8000 Flight Cycle (FC) of the thrust reverser accumulated life. This Service Bulletin
requires to do a fluorescent penetrant inspection of the affected area and stop drilling any cracking and
also to introduce the gusset reinforcement. The thrust reverser with modified 6 O’clock latch beam is
able to sustain the full service life and ultimate loads.
As a consequence for all thrust reverser pre-MOD No. 48539S16174, it becomes necessary to perform
an one time inspection of the 6 O’clock latch beam gussets between the latches L2 and L3 beam lugs,
adjacent to after cascade frame attachment bracket.
This Service Bulletin is published to advise all operators of A330 aircraft equipped with PRATT &
WHITNEY engines of the issue of PRATT & WHITNEY Service Bulletin No. PW4G-100-A78-116, which
provides instructions to in spect the thrust reverser latch beam gussets for cracks.
This Inspection Service Bulletin is not applicable for the thrust reversers which are modified in
accordance with PRATT & WHITNEY Service Bulletin No. PW4G-100-78-78 or Service Bulletin No.
A330-78-3014 or post MOD No. 48539S16174.
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A330
SERVICE BULLETIN
SUMMARY
Accomplishment of this one time Inspection Service Bulletin will contribute to detect potential crack
initiation or propagation in the thrust reverser latch beam gussets between the L2 and L3.
Early crack detection will help to avoid heavy repairs. Above the compliance accomplishment timescale,
if inspection and repair are not accomplished a crack propagation could potentially result in the loss of a
thrust reverser cascade part or an external panel part.
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 ETOPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 YES
NOTE
 (1)
: Service Bulletin must be accomplished.
MATERIAL PRICE INFORMATION
No Material
EFFECTIVITY
This Service Bulletin is applicable to this (these) operator(s) :
39V 56O 83V AAL ABR ARG BEL D2F DGA F2I FWI G8E GRL
HFY HVN I2L KAL OHY RSY TAM TAP THA U6A VIR WRC
CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU
 78.30.00.097
OEB
 None
AOT
 None
SIL
 None
ISI
 None
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 None
NATURE OF THE WORK
AIRCRAFT
 NO
EQUIPMENT
 YES
MANPOWER
Task 783024-832-801-001: Inspection of the thrust reverser 6 O’clock Latch Beam Gussets
TOTAL MANHOURS
 7.50
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A330
SERVICE BULLETIN
SUMMARY
Task 783024-832-801-001: Inspection of the thrust reverser 6 O’clock Latch Beam Gussets
ELAPSED TIME (HOURS)
 4.50
Additional manhours relat ed to Vendor SB; refer to:
Do a SDI of the Latch Beam Gussets between the L2 and
L3 on the thrust reverser 6 O’clock Latches, Engine 1
PRATT & WHITNEY Service
Bulletin No. PW4G-100-A78-116
PRATT & WHITNEY Service
Bulletin No. PW4G-100-78-78
Do a SDI of the Latch Beam Gussets between the L2 and
L3 on the thrust reverser 6 O’clock Latches, Engine 2
PRATT & WHITNEY Service
Bulletin No. PW4G-100-A78-116
PRATT & WHITNEY Service
Bulletin No. PW4G-100-78-78
APPENDICES
Appendix 01 - Manpower Gantt Chart
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A330
SERVICE BULLETIN
SUMMARY
**CONF ALL
A
A
A
TYPICAL
B
Z410
Z420
INSPECTION OF THE LATCH BEAM GUSSETS
BETWEEN THE L2 AND L3 OF THE
THRUST REVERSER 6 O’CLOCK LATCH BEAM
F
W
D
FORWARD LATCH (L2)
AFT LATCH (L4)
MIDDLE LATCH (L3)
LOWER ACCESS DOOR
ROTATED 180° ON VERTICAL AXIS
B
G_SB_783024_5_SAAA_01_02
Figure A-F SAAA - S heet 01
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A330
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 78
TITLE: EXHAUST - THRUST REVERSER - INSPECTION OF 6 O’CLOCK LATCH
BEAM GUSSETS BETWEEN FORWARD AND MIDDLE LATCH BEAM
LUGS FOR CRACKS ON PW4000 ENGINES
MODIFICATION No.: None
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
NOTE
: This Service Bulletin is only applicable to A330 aircraft equipped with PW4000
engines.
NOTE
: This Service Bulletin is not applicable to A330 aircraft on which MOD
No. 48539S16174 is embodied or Service Bulletin No. A330-78-3014 is
embodied or PRATT & WHITNEY Service Bulletin No. PW4G-100-78-78 is
accomplished on the two installed thrust reversers of engine 1 and engine 2.
(1) Models
330-223 330-321 330-322 330-323
(2) Effectivity by MSN
0050 0060 0062 0065 0072 0082 0087 0095-0096 0112 0116 0120 0122 0127 0143
0162 0171-0172 0181 0195 0206 0209 0219 0222-0224 0226 0229-0232 0238
0240-0241 0247 0249 0253 0255-0256 0258-0259 0262 0267 0275 0288 0290-0291
0296 0300 0305 0308 0312 0315 0317 0322-0324 0333 0337-0338 0342-0343 0346
0350-0351 0353 0358 0361-0362 0364 0366 0368 0370 0375 0380 0388 0403
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A330
SERVICE BULLETIN
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
39V
 0255
56O
 0231
83V
 0171
AAL
 0315 0323 0333 0337 0342 0370 0375 0380 0388
ABR
 0116 0127
ARG
 0290 0300 0358 0364
BEL
 0082 0095 0229 0249 0291 0324
D2F
 0209
DGA
 0240
F2I
 0072 0087
FWI
 0253 0343
G8E
 0288
GRL
 0230
HFY
 0096 0262
HVN
 0366
I2L
 0275
KAL
 0162 0172 0206 0219 0222 0226 0241 0256 0258 0267 0338 0350
0351 0368
OHY
 0353 0362
RSY
 0120
TAM
 0232 0238 0247 0259 0361
TAP
 0181 0195 0223 0305 0308 0312 0317
THA
 0050 0060 0062 0112 0122 0346
U6A
 0065 0143 0224
VIR
 0322 0403
WRC
 0296
(4) Configuration by MSN
MSN
 CONFIGURATION
0050 0060 0062 0065 0072 0082 0087 0095 0096 0112 0116
0120 0122 0127 0143 0162 0171 0172 0181 0195 0206 0209
0219 0222 0223 0224 0226 0229 0230 0231 0232 0238 0240
0241 0247 0249 0253 0255 0256 0258 0259 0262 0267 0275
0288 0290 0291 0296 0300 0305 0308 0312 0315 0317 0322
0323 0324 0333 0337 0338 0342 0343 0346 0350 0351 0353
0358 0361 0362 0364 0366 0368 0370 0375 0380 0388 0403
001
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A330
SERVICE BULLETIN
(5) Configuration definition
**CONF 001
Config. 001 is valid for all the aircraft given in the effectivity of this Service Bulletin as a
standard configuration.
(6) Material Effectivity
No Material Set
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
An operator has reported a crack found in the thrust reverser at middle gusset
between L2 and L3 latch attachment, adjacent to the after cascade frame attachment
bracket in the 6 O’clock latch beam. This damaged thrust reverser was pre-MOD No.
48539S16174 and only fitted on the A330 aircraft with PRATT & WHITNEY engines.
Past experience has shown that such latch beam gusset crack surface showed
indication of high cycle fatigue, l eading to the issuance o f the MOD No. 48539S16174
with the gusset steel doubler reinforcement. This MOD No. 48539S16174 was retrofitted
through the recommended modification Service Bulletin No. A330-78-3014 and PRATT &
WHITNEY Service Bulletin No. PW4G-100-78-78, with a threshold of 8000 Flight Cycle
(FC) of the thrust reverser accumulated life. This Service Bulletin requires to do a
fluorescent penetrant inspection of the affected area and stop drilling any cracking and
also to introduce the gusset reinforcement. The thrust reverser with modified 6 O’clock
latch beam is able to sustain the full service life and ultimate loads.
As a consequence for all thrust reverser pre-MOD No. 48539S16174, it becomes
necessary to perform an one time inspection of the 6 O’clock latch beam gussets
between the latches L2 and L3 beam lugs, adjacent to after cascade frame attachment
bracket.
(2) Objective/Action
This Service Bulletin is published to advise all operators of A330 aircraft equipped with
PRATT & WHITNEY engines of the issue of PRATT & WHITNEY Service Bulletin No.
PW4G-100-A78-116, which provides instructions to inspect the thrust reverser latch
beam gussets for cracks.
This Inspection Service Bulletin is not applicable for the thrust reversers which are
modified in accordance with PRATT & WHITNEY Service Bulletin No. PW4G-100-78-78
or Service Bulletin No. A330-78-3014 or post MOD No. 48539S16174.
(3) Advantages
Accomplishment of this one time Inspection Service Bulletin will contribute to detect
potential crack initiation or propagation in the thrust reverser latch beam gussets
between the L2 and L3.
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A330
SERVICE BULLETIN
Early crack detection will help to avoid heavy repairs. Above the compliance
accomplishment timescale, if inspection and repair are not accomplished a crack
propagation could potentially result in the loss of a thrust reverser cascade part or an
external panel part.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
Task 783024-832-801-001: Inspection of the thrust reverser 6 O’clock Latch Beam Gussets
(1) Do a SDI of the Latch Beam Gussets between the L2 and L3 on the thrust reverser 6
O’clock Latches, Engine 1
(2) Do a SDI of the Latch Beam Gussets between the L2 and L3 on the thrust reverser 6
O’clock Latches, Engine 2
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
Accomplishment of this Service Bulletin must be done as given below table:
Table 1, Config. 001 - Do a Special Detailed Inspection (SDI) of the thrust reverser 6 O’clock Latch
Beam Gussets of Engine 1 and Engine 2
COMPLIANCE TIME
(whichever occurs later)
CONDITION
 ACTION
Threshold
 Grace period
REPETITIVE
INTERVAL
All aircraft
 In accordance with
TASK 783024-832-801
001 Inspection of the
thrust reverser 6
O’clock Latch Beam
Gussets
(See Note)
When the thrust
reverser has
accumulated
between 22000 FC
and 26000 FC
since new
Within 24 months
from Airworthiness
Directive issuance
None
On the affected thrust
reverser halve(s) do
the modification in
accordance with
PRATT & WHITNEY
Service Bulletin No.
PW4G-100-78-78
Before next flight
 None
 None
If any crack(s)
is(are) found
No further action
 None
 None
 None
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A330
SERVICE BULLETIN
Table 1, Config. 001 - Do a Special Detailed Inspection (SDI) of the thrust reverser 6 O’clock Latch
Beam Gussets of Engine 1 and Engine 2
COMPLIANCE TIME
(whichever occurs later)
CONDITION
 ACTION
Threshold
 Grace period
REPETITIVE
INTERVAL
If no crack(s)
is(are) found
No further action
 None
 None
 None
NOTE
: This SDI is only required for the thrust reverser unit(s) on which the
MOD No. 48539S16174 was not embodied or the Service Bulletin
No. A330-78-3014 or PRATT & WHITNEY Service Bulletin No.
PW4G-100-78-78 was not accomplished.
This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA) will be issued
to confirm this classification. It is anticipated that the AD will confirm the thresholds
given above but reference should be made to the AD for confirmation of the mandated
accomplishment timescale.
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approv al No. EASA. 21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
NOTE
: The minimum man-hours necessary to accomplish this Service Bulletin are
those for the Inspection. Depending on the inspection result, additional man-
hours can apply.
Task 783024-832-801-001: Inspection of the thrust reverser 6 O’clock Latch Beam Gussets
Get Access
 3.00
Tests
 1.50
Close-Up
 3.00
TOTAL MANHOURS
 7.50
ELAPSED TIME (HOURS)
 4.50
Additional manhours relat ed to Vendor SB; refer to:
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 5
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A330
SERVICE BULLETIN
Task 783024-832-801-001: Inspection of the thrust reverser 6 O’clock Latch Beam Gussets
Do a SDI of the Latch Beam Gussets between the L2
and L3 on the thrust reverser 6 O’clock Latches,
Engine 1
PRATT & WHITNEY Service
Bulletin No. PW4G-100-A78-116
PRATT & WHITNEY Service
Bulletin No. PW4G-100-78-78
Do a SDI of the Latch Beam Gussets between the L2
and L3 on the thrust reverser 6 O’clock Latches,
Engine 2
PRATT & WHITNEY Service
Bulletin No. PW4G-100-A78-116
PRATT & WHITNEY Service
Bulletin No. PW4G-100-78-78
NOTE
: For an explanation of the man-hours and elapsed time, refer to the Gantt
Chart, Fig. A-FAAAA
 given in Appendix 01 - Manpower Gantt Chart .
H. WEIGHT AND BALANCE
Not Changed
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
Aircraft Maintenance Manual (AMM)
 06-20-00 78-30-00 78-31-00
Elec. Std. Practices Manual (ESPM)
 20-55-00
Service Bulletin (SB)
 A330-78-3014
Vendor Service B ulletin (VSB)
 PRATT & WHITNEY Service
Bulletin No. PW4G-100-78-78
PRATT & WHITNEY Service
Bulletin No. PW4G-100-A78-116
K. PUBLICATION AFFECTED
None
L. INTERCHANGEABILITY/MIXABILITY
Not Applicable
M. SPARES
None
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 6
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A330
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
No Material Set
B. INDUSTRY SUPPORT INFORMATION
AIRBUS will not provide industry support for accomplishment of this Service Bulletin.
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.
C. LIST OF COMPONENTS
No Kit
D. LIST OF MATERIALS - OPERATOR SUPPLIED
None
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
F. TOOLING
(1) Tooling - Price and Availability
None
(2) Tools
To accomplish this Service Bulletin it is necessary to use the tools listed in the
subsequent refe renced tasks:
- AMM Task 78-30-00-010-801
- AMM Task 78-30-00-410-801
- AMM Task 78-31-00-710-804
- PRATT & WHITNEY Service Bulletin No. PW4G-100-A78-116
- PRATT & WHITNEY Service Bulletin No. PW4G-100-78-78.
(3) Special Tools
None
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 7
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A330
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 8
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A330
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 783024-832-801-001 - Inspection of the thru st reverser 6 O’clock Latch Beam Gussets
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. To allow more flexibility, the rule "refer to" and "in
accordance with" will apply to these paragraphs 3.C. and 3.D. Other paragraphs
are recommended and may be deviated from, done as part of other actions or
done with accepted methods different from those given in the Service Bulletin, as
long as the RC paragraphs can be done and the aircraft can be put back into a
serviceable condition.
NOTE
: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 9
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A330
SERVICE BULLETIN
For any deviations to the instructions, including RC paragraph contained herein,
contact AIRBUS for further instructions and approval.
NOTE
: The purpose of flowcharts is to supplement the information given in the Procedure
and Compliance paragraphs and not to serve as the primary source for tasks or
compliance times given in this Service Bulletin.
Task Associated Data
Zone
410 420
Manpower
TOTAL MANHOURS
 7.50
ELAPSED TIME (HOURS)
 4.50
Additional manhours related to Vendor SB; refer to:
PRATT & WHITNEY Service Bulletin No. PW4G-100-A78-116
PRATT & WHITNEY Service Bulletin No. PW4G-100-78-78
A. GENERAL
(1) Subtask 783024-910-001-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
(a) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(2) Subtask 783024-839-001-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
B. PREPARATION
(1) Subtask 783024-210-001-001 - Do a Check of th e Aircraft Maintenance Records
Manpower Resources
Skills
 NON SPECIFIC
References
Service Bulletin (SB)
 A330-78-3014
Vendor Service B ulletin (VSB)
 PRATT & WHITNEY PW4G-100-78-78
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 10
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A330
SERVICE BULLETIN
(a) Check for the embodiment of MOD No. 48539S16174 or accomplishment of
Service Bulletin No. A330-78-3014 or PRATT & WHITNEY Service Bulletin No.
PW4G-100-78-78 on the thrust reversers of engine 1 and engine 2 within the
threshold given in PLANNING INFORMATION paragraph E.(2).
1
 If embodied/accomplished:
a
 No further action in accordance with this Service Bulletin.
2
 If not embodied/accomplished:
a
 Do the SUBTASK 783024-941-001 001 Job Set-up to accomplish the SDI
of the thrust reverser 6 O’clock latch beam gussets of engine 1 and
engine 2.
(2) Subtask 783024-941-001-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 78-30-00-010-801
NOTE
: For the basic Aircraft configuration, refer to AMM Chapter "Introduction -
Aircraft status for maintenance" in Manual Front Matter section.
(a) Open the thrust reverser cowl doors of engine 1 and engine 2, refer to AMM Task
78-30-00-010-801.
C. PROCEDURE
(1) Subtask 783024-230-001-001 - Do a SDI of the Latch Beam Gussets between the L2
and L3 on the thrust reverser 6 O’clock Latches, Engine 1
Work Zones and Access Panels
Zone
 Access/Work location
410
References
Service Bulletin (SB)
 A330-78-3014
Vendor Service B ulletin (VSB)
 PRATT & WHITNEY PW4G-100-78-78
PRATT & WHITNEY PW4G-100-A78-116
(a) Do a SDI of the thrust reverser 6 O’clock latch beam gussets in accordance with
PRATT & WHITNEY Service Bulletin No. PW4G-100-A78-116 within the threshold
given in PLANNING INFORMATION paragraph E.(2).
NOTE
: This SDI is only required for the thrust reverser unit(s) on which the
MOD No. 48539S16174 was not embodied or the Service Bulletin
No. A330-78-3014 or PRATT & WHITNEY Service Bulletin No.
PW4G-100-78-78 was not accomplished.
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 11
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A330
SERVICE BULLETIN
1
 If crack(s) is(are) found:
a
 Modify the thrust reverser 6 O’clock latch beam gussets in accordance
with PRATT & WHITNEY Service Bulletin No. PW4G-100-78-78.
b
 No further action required.
2
 If no crack(s) is(are) found:
a
 No further action required.
(2) Subtask 783024-230-002-001 - Do a SDI of the Latch Beam Gussets between the L2
and L3 on the thrust reverser 6 O’clock Latches, Engine 2
Work Zones and Access Panels
Zone
 Access/Work location
420
References
Service Bulletin (SB)
 A330-78-3014
Vendor Service B ulletin (VSB)
 PRATT & WHITNEY PW4G-100-78-78
PRATT & WHITNEY PW4G-100-A78-116
(a) Do a SDI of the thrust reverser 6 O’clock latch beam gussets in accordance with
PRATT & WHITNEY Service Bulletin No. PW4G-100-A78-116 within the threshold
given in PLANNING INFORMATION paragraph E.(2).
NOTE
: This SDI is only required for the thrust reverser unit(s) on which the
MOD No. 48539S16174 was not embodied or the Service Bulletin
No. A330-78-3014 or PRATT & WHITNEY Service Bulletin No.
PW4G-100-78-78 was not accomplished.
1
 If crack(s) is(are) found:
a
 Modify the thrust reverser 6 O’clock latch beam gussets in accordance
with PRATT & WHITNEY Service Bulletin No. PW4G-100-78-78.
b
 No further action required.
2
 If no crack(s) is(are) found:
a
 No further action required.
D. TEST
(1) Subtask 783024-700-001-001 - Testing
Manpower Resources
Skills
 NON SPECIFIC
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 12
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A330
SERVICE BULLETIN
References
Aircraft Maintenance Manual (AMM)
 Task 78-30-00-410-801
Task 78-31-00-710-804
(a) Job Set-up:
1
 Remove the safety clip(s) and/or tag(s) and close/unlock this (these) circuit
breaker(s) as specified in the closing of the thrust reverser cowl doors, refer to
AMM Task 78-30-00-410-801.
(b) Test:
1
 Do the thrust reverser Cycling Test Multipurpose Control & Display Unit
(MCDU), refer to AMM Task 78-31-00-710-804.
E. CLOSE-UP
(1) Subtask 783024-942-001-001 - Close-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 78-30-00-410-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Close the thrust reverser cowl doors of engine 1 and engine 2, refer to AMM Task
78-30-00-410-801.
(c) Put the aircraft back to its initial configuration.
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 13
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A330
SERVICE BULLETIN
**CONF ALL
NOTE:
THE PURPOSE OF FLOWCHARTS IS TO SUPPLEMENT THE INFORMATION GIVEN IN THE PROCEDURE
AND COMPLIANCE PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE FOR TASKS OR
COMPLIANCE TIMES GIVEN IN THIS SERVICE BULLETIN.
IS EMBODIED ORYES NO
NO FURTHER ACTION
DO A SPECIAL DETAILED INSPECTION OF THE
6 O’CLOCK LATCH BEAM GUSSETS ON THRUST
REVERSER OF ENGINE 1 AND ENGINE 2 IN
ACCORDANCE WITH TASK 783024−832−801−001
YES NO
ACCOMPLISH THE VSB PW4G−100−78−78
NO FURTHER ACTION
NO FURTHER ACTION
ARE
CRACKS FOUND?
CHECK FOR THE EMBODIMENT OF THE MOD No
48539S16174 OR ACCOMPLISHMENT OF VSB
PW4G−100−78−78 OR SERVICE BULLETIN No
A330−78−3014 ON THRUST REVERSER OF ENGINE 1
ACCOMPLISHED?
AND ENGINE 2 WITHIN THE THRESHOLD GIVEN IN
PLANNING INFORMATION PARAGRAPH E.(2)
AT THE THRESHOLD GIVEN IN PLANNING
INFORMATION PARAGRAPH E.(2)
G_SB_783024_5_FAAA_01_02
Figure A-FFAAA - Sheet 01
Flow-Chart
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 14
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A330
SERVICE BULLETIN
Appendix 01 - Manpower Gantt Chart
**CONF ALL
For an explanation of the man-hours and elapsed time, refer to the next page(s).
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A330
SERVICE BULLETIN
Appendix 01 - Manpower Gantt Chart
**CONF ALL
ELAPSED TIME ASSUMPTION SERVICE BULLETIN No A330−78−3024
SB ELAPSED TIME
(HOURS)
MH ET/S
0.5 1 1.5 2 3 3.5 4 4.50 2.5
PER
3.00 1.50
1.50 1.50
2
1
3.00 1.502
REFER TO VENDOR SERVICE BULLETIN
REFER TO VENDOR SERVICE BULLETIN
TOTAL MANHOURS
SB ELAPSED TIME
7.50
4.50
STEPS
MH
ET/S:
PER
MANHOURS
ELAPSED TIME PER STEP
NUMBER OF PERSONS
THIS CHART IS ONLY A PROPOSAL.
OPERATORS MAY DETERMINE THAT ANOTHER WAY
TO DO THE WORK IS MORE SUITABLE FOR THEM.
NOTE:
:
:
IF A VSB IS INVOLVED, THE ASSOCIATED MANHOURS
ARE NOT REFLECTED IN THIS GANTT CHART.
GET ACCESS
DO A SPECIAL DETAILED INSPECTION (SDI)
CLOSE−UP
TEST
OF THE LATCH BEAM GUSSETS BETWEEN
THE L2 AND L3 ON THE THRUST REVERSER
6 O’CLOCK LATCHES, ENGINE 1
01
02
01
02
DO A SDI OF THE LATCH BEAM GUSSETS
BETWEEN THE L2 AND L3 ON THE
THRUST REVERSER 6 O’CLOCK LATCHES,
ENGINE 2
G_SB_783024_5_AAAA_01_04
Figure A-F AAAA - S heet 01
Manpower Gantt Chart
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A330
SERVICE BULLETIN
Service Bulletin REPORTING
TITLE: EXHAUST - THRUST REVERSER - INSPECTION OF 6 O’CLOCK LATCH
BEAM GUSSETS BETWEEN FORWARD AND MIDDLE LATCH BEAM
LUGS FOR CRACKS ON PW4000 ENGINES
MODIFICATION No.: None
SB Reporting status
This Service Bulletin will only be incorporated into affected customized Maintenance and Flight
Operations Products if it is duly reported to Airbus.
General information
The SB Reporting policy is published in ISI 00.00.00135. This document provides information regarding:
the SB Reporting means and benefits, the update of customized Maintenance Products and customized
Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations Products" for
further information on the update of affected Flight Operations Products.
SB Reporting procedure
Standard practice to report SB is to use the online reporting application on AirbusWorld.
Refer to ISI 00.00.00179:
- For complete information on reporting means to Airbus. Question 2 "What are the standard
practices for SB reporting?"
- If this SB requires previous or simultaneous accomplishment of other SBs, Question 3 "What about
the reporting of prerequisite Service Bulletin?"
NOTE:
 ISI 00.00.00179 covers all the frequently asked questions about SB Reporting. It is revised on a
regular basis.
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A330
SERVICE BULLETIN
QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin. The reported data
that you provide us will be used to analyse areas of difficulties and to take corrective action to further
improve the quality of our Service Bulletins.
We thank you for the time you have taken in completing this form.
(Please rate on a scale of 1 to 4, with 4 being the highest score)
- Quality rating of this SB 4321
- Quality rating of the Accomplishment Instructions 4321
- Quality rating of the Illustrations 4321
- Is this SB easy to understand ? Y/N
If you have had difficulties in the accomplishment of this SB please quote below the area(s) and give a
short description of the issue.
Planning Material Instructions
X Effectivity X Kit content X Preparation
X Reason X List of Materials Operator Supplied X Mod/Inspection
X Manpower X Industry support X Test
X References X Re-identification X Close-Up
X Publication X Tooling X Illustrations
Comments:
Operator: Date:
Name/Title:
Please return this form to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn : SEM4 Service Bulletins Management
F A X:( 3 3 )56 19 34 25 1
Or via your Resident Customer Support Office.
DATE: Jun 28/18 SERVICE BULLETIN No.: A330-78-3024
REVISION No.: 00 - Jun 28/18 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
