# Airbus Service Bulletin A340-27-4107

Copy: Revision 09 ("FAA-2016-9393_A340-27-4107 Rev 09"), 65 pages: PDF https://openairdocs.org/files/sha256/81/1a/811af2df5f11c081a630af2087072ea9b33da42d5b214c6072264afb0e8bfa67; text https://openairdocs.org/service-documents/airbus/a340-27-4107/file/811af2df5f11.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2016-9393; AD 2017-13-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A340-27-4107
- Latest revision known: A340-27-4107, Revision 09, dated March 29, 2016 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/a340-27-4107

## ADs that cite it (4) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2017-20-02](https://openairdocs.org/ad/2017-20-02.md), effective Oct 12, 2017: Revision 09
- [AD 2017-13-05](https://openairdocs.org/ad/2017-13-05.md), effective Aug 28, 2017: Revision 09
- [AD 2013-13-16](https://openairdocs.org/ad/2013-13-16.md), effective Sep 10, 2013: Revisions 02, 03, 04, 05, 06, 07 and 08
- [AD 2005-07-04](https://openairdocs.org/ad/2005-07-04.md), effective May 4, 2005: Revision 04

Also cited in [3 proposed ADs](https://openairdocs.org/service-documents/airbus/a340-27-4107/proposed.md).

## Text (65 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2016-9393; AD 2017-13-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 27
TITLE: FLIGHT CONTROLS - THSA - INSPECTION OF THE BALL SCREW
ASSY FOR INTEGRITY OF THE PRIMARY AND SECONDARY LOAD
PATH
MODIFICATION No.: None
This page transmits Revision No.09 of Service Bulletin No.A340-27-4107
ADDITIONAL WORK
**CONF ALL
No additional work is required by this revision for aircraft modified by any previous issue.
REASON
Revision No. 09 issued to add the Detailed Inspection of the Checkable Shear-Pin (CSP).
CHANGES
The main changes of this revision are:
- Lubrication of the THSA after Inspection added,
- TASK 274107-833-801 001 Replacement of the THSA added,
- TASK 274107-832-802 001 Detailed Inspection of the THSA Ball Screw Assy of the THSA PN
47147-700/710 or PN 47172-500/510/520/530 created,
- TASK 274107-833-802 001 Replacement of the CSP created,
- Flow Charts updated,
- Fig. A-FBBAA created,
- Inspection Service Bulletin (ISB) applicability extended to THSA 47147-XXX family,
- Minor changes applied.
NOTE
: Revised text and layout changes of this revision are not identified with revision bars.
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
SUMMARY
MODIFICATIONS
 Minor editorial or document structure change
 N
REASON/DESCRIPTION/OPERATIONAL
CONSEQUENCES
Minor editorial or document structure change
 N
GENERAL EVALUATION
 Minor editorial or document structure change
 N
MATERIAL PRICE INFORMATION
 Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
EFFECTIVITY
 Minor editorial or document structure change
 N
CONCURRENT REQUIREMENTS
 Minor editorial or document structure change
 N
REFERENCES / REPERCUSSIONS
 Minor editorial or document structure change
 N
NATURE OF THE WORK
 Minor editorial or document structure change
 N
MANPOWER
 Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
APPENDICES
 Minor editorial or document structure change
 N
Fig. A-FSAAA
 Minor editorial or document structure change
 N
Fig. A-FSAAA Sheet 01
 Minor editorial or document structure change
 N
Fig. A-FSAAB
 Minor editorial or document structure change
 N
Fig. A-FSAAB Sheet 01
 Minor editorial or document structure change
 N
PLANNING INFORMATION
EFFECTIVITY
 Minor editorial or document structure change
 N
Configuration definition
 Minor editorial or document structure change
 N
CONF 001
 Minor editorial or document structure change
 N
CONF 002
 Minor editorial or document structure change
 N
Material Effectivity
 Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
CONCURRENT REQUIREMENTS
 Minor editorial or document structure change
 N
REASON
 Minor editorial or document structure change
 N
History
 Minor editorial or document structure change
 N
Objective/Action
 Minor editorial or document structure change
 N
Advantages
 Minor editorial or document structure change
 N
Operational/Maintenance
Consequences
Minor editorial or document structure change
 N
DESCRIPTION
 Minor editorial or document structure change
 N
COMPLIANCE
 Minor editorial or document structure change
 N
Classification
 Minor editorial or document structure change
 N
Accomplishment Timescale
 Minor editorial or document structure change
 N
Accomplishment Timescale
 Minor editorial or document structure change
 N
APPROVAL
 Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
MANPOWER
 Minor editorial or document structure change
 N
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
WEIGHT AND BALANCE
 Minor editorial or document structure change
 N
ELECTRICAL LOAD DATA
 Minor editorial or document structure change
 N
REFERENCES
 Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
PUBLICATION AFFECTED
 Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
INTERCHANGEABILITY/MIXABILITY
 Minor editorial or document structure change
 N
SPARES
 Minor editorial or document structure change
 N
MATERIAL INFORMATION
MATERIAL - PRICE AND AVAILABILITY
 Minor editorial or document structure change
 N
Procurement Addresses
 Minor editorial or document structure change
 N
Price and Availability
 Minor editorial or document structure change
 N
INDUSTRY SUPPORT INFORMATION
 Minor editorial or document structure change
 N
LIST OF COMPONENTS
 Minor editorial or document structure change
 N
LIST OF MATERIALS - OPERATOR
SUPPLIED
Minor editorial or document structure change
 N
Consumable Materials
 Minor editorial or document structure change
 N
Components
 Minor editorial or document structure change
 N
Equipment
 Minor editorial or document structure change
 N
Equipement BFEA01
 Minor editorial or document structure change
 N
PARTS TO BE RE-IDENTIFIED BY
OPERATOR
Minor editorial or document structure change
 N
TOOLING
 Minor editorial or document structure change
 N
Tooling - Price and Availability
 Minor editorial or document structure change
 N
Tools
 Minor editorial or document structure change
 N
Special Tools
 Minor editorial or document structure change
 N
ACCOMPLISHMENT INSTRUCTIONS
TASK 274107- 832-801-001-Detailed
Inspection of the THSA Ball Screw Assy of
the THSA PN 47147-500 or PN
47172-300
Minor editorial or document structure change
 N
Task associated data - 001
 Minor editorial or document structure change
 N
Task associated data - 002
 Minor editorial or document structure change
 N
Subtask 274107-910-001-001
 Minor editorial or document structure change
 N
Subtask 274107-839-001-001
 Minor editorial or document structure change
 N
Subtask 274107-941-001-001
 Minor editorial or document structure change
 N
Subtask 274107-832-001-001
 Minor editorial or document structure change
 N
Subtask 274107-833-001-001
 Minor editorial or document structure change
 N
Subtask 274107-942-001-001
 Minor editorial or document structure change
 N
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
TASK 274107- 832-802-001-Detailed
Inspection of the THSA Ball Screw Assy of
the THSA PN 47147-700/710 or PN
47172-500/510/520/530
Minor editorial or document structure change
 N
Task associated data - 001
 Minor editorial or document structure change
 N
Task associated data - 002
 Minor editorial or document structure change
 N
Subtask 274107-910-002-001
 Minor editorial or document structure change
 N
Subtask 274107-839-002-001
 Minor editorial or document structure change
 N
Subtask 274107-941-003-001
 Minor editorial or document structure change
 N
Subtask 274107-832-002-001
 Minor editorial or document structure change
 N
Subtask 274107-832-003-001
 Minor editorial or document structure change
 N
Subtask 274107-833-002-001
 Minor editorial or document structure change
 N
Subtask 274107-942-003-001
 Minor editorial or document structure change
 N
TASK 274107- 833-801-001-Replacement
of the THSA
Minor editorial or document structure change
 N
Task associated data - 001
 Minor editorial or document structure change
 N
Task associated data - 002
 Minor editorial or document structure change
 N
Subtask 274107-910-004-001
 Minor editorial or document structure change
 N
Subtask 274107-839-004-001
 Minor editorial or document structure change
 N
Subtask 274107-910-004-001
 Minor editorial or document structure change
 N
Subtask 274107-839-004-001
 Minor editorial or document structure change
 N
Subtask 274107-941-002-001
 Minor editorial or document structure change
 N
Subtask 274107-941-002-001
 Minor editorial or document structure change
 N
Subtask 274107-900-001-001
 Minor editorial or document structure change
 N
Subtask 274107-900-001-002
 Minor editorial or document structure change
 N
Subtask 274107-700-001-001
 Minor editorial or document structure change
 N
Subtask 274107-700-001-001
 Minor editorial or document structure change
 N
Subtask 274107-942-002-001
 Minor editorial or document structure change
 N
Subtask 274107-942-002-002
 Minor editorial or document structure change
 N
TASK 274107- 833-802-001-Replacement
of the CSP
Minor editorial or document structure change
 N
Task associated data - 001
 Minor editorial or document structure change
 N
Task associated data - 002
 Minor editorial or document structure change
 N
Subtask 274107-910-003-001
 Minor editorial or document structure change
 N
Subtask 274107-839-003-001
 Minor editorial or document structure change
 N
Subtask 274107-941-004-001
 Minor editorial or document structure change
 N
Subtask 274107-900-002-001
 Minor editorial or document structure change
 N
Subtask 274107-700-002-001
 Minor editorial or document structure change
 N
Subtask 274107-942-004-001
 Minor editorial or document structure change
 N
Fig. A-FBAAA
 Minor editorial or document structure change
 N
Fig. A-FBAAA Sheet 01
 Minor editorial or document structure change
 N
Fig. A-FBAAB
 Minor editorial or document structure change
 N
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Fig. A-FBAAB Sheet 01
 Minor editorial or document structure change
 N
Fig. A-FBBAA
 Minor editorial or document structure change
 N
Fig. A-FBBAA Sheet 01
 Minor editorial or document structure change
 N
Fig. A-FBBAA Sheet 02
 Minor editorial or document structure change
 N
Fig. A-FFAAA
 Minor editorial or document structure change
 N
Fig. A-FFAAA Sheet 01
 Minor editorial or document structure change
 N
Fig. A-FFAAB
 Minor editorial or document structure change
 N
Fig. A-FFAAB Sheet 01
 Minor editorial or document structure change
 N
Fig. A-FRAAA
 Minor editorial or document structure change
 N
Fig. A-FRAAA Sheet 01
 Minor editorial or document structure change
 N
Fig. A-FRAAB
 Minor editorial or document structure change
 N
Fig. A-FRAAB Sheet 01
 Minor editorial or document structure change
 N
FILLING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete document.
Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
HISTORY OF PREVIOUS REVISIONS
Refer to the previous issues of AOT 27A4107.
The AOT 27A4107 was issued on May 30/02 to inform the operators about a repetitive inspection to be
performed on the ball screw assy for integrity of the primary and secondary load path.
The AOT 27A4107 was revised on Jul 25/02 to provide operators with a simpler Inspection procedure
and clearer GO/NOGO criteria.
Revision No. 02 was issued to supersede AOT 27A4107 Rev. 01 (dated Jul 25/02).
Revision No. 03 was issued to add the inspection of the screw shaft and to correct the AMM
references.
Revision No. 04 was issued to extend the effectivity and to introduce minor changes.
Revision No. 05 was issued to :
correct the AMM reference,
add inspection procedure for RH THS/THSA lower attachment,
change inspection procedure from THS/THSA lower attachment to LH THSA.
Revision No. 06 was issued to :
extend the effectivity up to MSN 0668,
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 5
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
delete the aircraft MSN 0289 from the effectivity,
update the preparation para.
Revision No. 07 was issued to update the Effectivity.
Revision No. 08 is issued to divide this Service Bulletin into :
Config. 01 valid for aircraft without Serv ice Bulletin No. A340- 27-4136 (THS A PN 47172-XXX)
accomplished.
Config. 02 valid for aircraft with Service Bulletin No. A340-27-4136 accomplished and without Service
Bulletin No. A340-92-4056 accomplished.
REVISION SEQUENCE
ORIGINAL: May 30/02
REVISION No.: 02 - Sep 23/02
REVISION No.: 03 - Dec 04/02
REVISION No.: 04 - Jun 20/03
REVISION No.: 05 - Dec 08/03
REVISION No.: 06 - Dec 16/05
REVISION No.: 07 - Mar 16/07
REVISION No.: 08 - Dec 06/07
REVISION No. : 09 - Mar 29/16
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 6
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A340
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 27
TITLE: FLIGHT CONTROLS - THSA - INSPECTION OF THE BALL SCREW
ASSY FOR INTEGRITY OF THE PRIMARY AND SECONDARY LOAD
PATH
**CONF ALL
MODIFICATIONS
None
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
The Trimmable Horizontal Stabilizer Actuator (THSA) is composed of a ball nut, which forms the
primary load path and a threaded nut as a secondary load path. Both run on the screw shaft. In case of
failure of the primary load path, loads are transferred to the secondary one. When the secondary nut is
loaded, the friction increases between the titanium nut and steel screw due to material characteristics.
Investigations of the THSA transfer tube have indicated that the secondary nut does not lock the THSA
after few movements as expected under certain cyclic load conditions but c ontinues to operate with
high friction which results in damaging the screw and the secondary nut.
Operation of the secondary load path is detected by the Flight Control Primary Computers (FCPC) if the
THSA efficiency decreases to such an extent that the position error monitoring threshold is exceeded. If
this condition remains undetected, a primary load path failure may result in damaging the screw and
secondary nut and, in extreme cases, in failure of the actuator.
This Service Bulletin introduces a repetitive deta iled visual inspection of th e THSA ball screw assy, a
check of the gap between the secondary nut tenons and the transfer plates with a feeler gage or a
detailed inspection of the checkable shear-pins.
The accomplishment of this Service Bulletin will ensure the reliable function of the THSA.
The Operational/Maintenance Consequences of this Service Bulletin are covered by the update of the
affected publications detailed in "PLANNING INFORMATION".
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A340
SERVICE BULLETIN
SUMMARY
Installation of THSA fitted with Checkable Shear-Pin (PN 47147-700/710 or PN 47172-500/510/520/530)
and associated to electrical harness (MOD No 52269D44449 or MOD No 52269D44450 and MOD No
56056C10650 embodiment or Service Bulletin No A340-92-4056 accomplishment) is a terminating
action and cancels the requirements of the Inspection Service Bulletin No A340-27-4107.
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 LROPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 NO
NOTE
 (1)
: Service Bulletin must be accomplished.
MATERIAL PRICE INFORMATION
**CONF 001
No Material
**CONF 002
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Equipment BFEA01
 1
 See SB
 CSP
EFFECTIVITY
**CONF ALL
This Service Bulletin is applicable to this (these) operator(s) :
06Y 15R 31V 39N 41N 74W 83V 98W 98X ABD AFR AIB ALD
ALK ARG BOE CAL CPA DGA DLH F2I FIN G8E GAF HFM HFY
IBE IRC IRM KAC M3R MAU MDG MRJ O2X PAL PUE QAF ROI
S3R SAA SAS SFB SLM SWR TAP THT THY UAE VCV
CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU
 27.44.51.008
OEB
 None
AOT
 27A4107
SIL
 None
ISI
 27.40.00014
LINE MAINTENANCE AFFECTED
 No
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A340
SERVICE BULLETIN
SUMMARY
LIFE LIMIT
 None
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 YES
HARD
 NO
SOFT
 NO
OBRM
 NO
MANPOWER
**CONF 001
Task 274107-832-801-001: Detailed Inspection of the THSA Ball Screw Assy of the THSA PN
47147-500 or PN 47172-300
TOTAL MANHOURS
 6.00
ELAPSED TIME (HOURS)
 6.00
Task 274107-832-802-001: Detailed Inspection of the THSA Ball Screw Assy of the THSA PN
47147-700/710 or PN 47172-500/510/520/530
TOTAL MANHOURS
 0.00
Task 274107-833-801-001: Replacement of the THSA
TOTAL MANHOURS
 23.00
ELAPSED TIME (HOURS)
 14.00
Task 274107-833-802-001: Replacement of the CSP
TOTAL MANHOURS
 0.00
**CONF 002
Task 274107-832-801-001: Detailed Inspection of the THSA Ball Screw Assy of the THSA PN
47147-500 or PN 47172-300
TOTAL MANHOURS
 0.00
Task 274107-832-802-001: Detailed Inspection of the THSA Ball Screw Assy of the THSA PN
47147-700/710 or PN 47172-500/510/520/530
TOTAL MANHOURS
 6.50
ELAPSED TIME (HOURS)
 5.00
Task 274107-833-801-001: Replacement of the THSA
TOTAL MANHOURS
 23.00
ELAPSED TIME (HOURS)
 14.00
Task 274107-833-802-001: Replacement of the CSP
TOTAL MANHOURS
 5.50
ELAPSED TIME (HOURS)
 5.50
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A340
SERVICE BULLETIN
SUMMARY
APPENDICES
**CONF ALL
None
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A340
SERVICE BULLETIN
SUMMARY
**CONF 001
BALL NUT ASSY
TO BE VISUALLY
INSPECTED
GAP TO BE
MEASURED
FR87
FR80
,  Z311 Z312
B
B C
A
312AR
A
Z300
C
F_SB_274107_5_SAAA_01_00
Figure A-FSAAA - Sheet 01
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 5
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A340
SERVICE BULLETIN
SUMMARY
**CONF 002
Z300
FR87
FR80
,  Z311 Z312
C
A
B
B
C
BALL NUT ASSY
TO BE VISUALLY
INSPECTED
CHECKABLE SHEAR
PIN TO BE
INSPECTED
CHECKABLE SHEAR
PIN TO BE
INSPECTED
312ARA
F_SB_274107_5_SAAB_01_00
Figure A-FSAAB - Sheet 01
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 6
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A340
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 27
TITLE: FLIGHT CONTROLS - THSA - INSPECTION OF THE BALL SCREW
ASSY FOR INTEGRITY OF THE PRIMARY AND SECONDARY LOAD
PATH
MODIFICATION No.: None
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
(1) Models
340-211 340-212 340-213 340-311 340-312 340-313
(2) Effectivity by MSN
0002 0004 0009 0014 0020 0022-0023 0025-0026 0029 0031 0038 0041 0043-0044
0046-0047 0049 0051 0056-0058 0061 0063 0074-0076 0078-0081 0084-0085
0089-0091 0093-0094 0101 0104 0114-0115 0117 0123 0125-0126 0128 0134-0137
0139 0142 0145-0147 0149-0152 0154 0156-0160 0163-0164 0166-0170 0174-0175
0178-0180 0185-0187 0190 0192-0194 0196-0197 0199 0201-0202 0204 0207-0208
0210 0212-0215 0217-0218 0220-0221 0227-0228 0233 0236-0237 0242-0243
0245-0246 0252 0257 0260 0263-0264 0268 0270 0273-0274 0278 0280 0282 0292
0297 0302 0304 0307 0310 0318-0319 0321 0325 0327 0329 0331-0332 0335 0347
0352 0354-0355 0367 0373-0374 0377-0379 0381 0385 0387 0390 0395 0399 0402
0406 0411 0413 0415 0424 0429-0430 0433-0435 0438 0446-0447 0450 0459 0467
0470 0474 0483 0528 0538 0541 0544-0546 0554 0556 0559 0561-0562 0582 0585
0590 0598 0643 0646 0651 0668 0793 0800
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A340
SERVICE BULLETIN
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
06Y
 0139 0149
15R
 0151
31V
 0093 0381
39N
 0168 0174
41N
 0009
74W
 0047 0051
83V
 0280 0292
98W
 0014 0022
98X
 0429
ABD
 0210
AFR
 0029 0078 0084 0186 0207 0237 0245 0246 0260 0307 0310 0377
0399
AIB
 0192 0243 0264
ALD
 0156 0159 0178
ALK
 0374
ARG
 0063 0074 0080 0085 0094 0123 0126 0128 0170 0193 0373
BOE
 0554
CAL
 0402 0406 0411 0415 0433 0541
CPA
 0136 0137 0142 0147 0157 0160 0208 0218 0220 0227 0228
DGA
 0075 0081
DLH
 0135 0158 0213 0233 0252 0297 0304 0321 0325 0327 0335 0347
0352 0354 0379 0390 0434 0447
F2I
 0038 0043 0114 0214
FIN
 0058
G8E
 0187 0196
GAF
 0274 0355
HFM
 0117 0367
HFY
 0190 0202
IBE
 0125 0134 0145 0146 0217 0221 0329 0483
IRC
 0002
IRM
 0020 0056 0164 0282
KAC
 0089 0090 0101 0104
M3R
 0061
MAU
 0076 0152 0194 0268 0793 0800
MDG
 0319
MRJ
 0257
O2X
 0273 0278
PAL
 0302 0318 0332 0387 0459 0474
PUE
 0212 0215
QAF
 0026 0528
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A340
SERVICE BULLETIN
OPERATOR
 MSN
ROI
 0199 0201
S3R
 0004 0204
SAA
 0197 0378 0544 0582 0590 0643 0646 0651
SAS
 0167 0413 0424 0430 0435 0450 0467 0470
SFB
 0046
SLM
 0049 0242
SWR
 0150 0154 0169 0175 0179 0263 0538 0545 0546 0556 0559 0561
0562 0585 0598
TAP
 0041 0044 0079 0091
THT
 0385 0395 0438 0446 0668
THY
 0023 0025 0057 0115 0180 0270 0331
UAE
 0163 0166 0185 0236
VCV
 0031
(4) Configuration by MSN
MSN
 CONFIGURATION
0002 0004 0020 0022 0029 0038 0043 0047 0051 0056 0058
0063 0074 0078 0079 0080 0081 0085 0089 0090 0093 0094
0101 0104 0114 0117 0125 0126 0128 0136 0139 0145 0149
0151 0156 0159 0164 0170 0174 0178 0190 0192 0199 0202
0204 0207 0212 0213 0214 0215 0220 0280 0282 0292 0399
0429 0474 0554
001 002
0009 0014 0023 0025 0026 0031 0041 0044 0046 0049 0057
0061 0075 0076 0084 0091 0115 0123 0134 0135 0137 0142
0146 0147 0150 0152 0154 0157 0158 0160 0163 0166 0167
0168 0169 0175 0179 0180 0185 0186 0187 0193 0194 0196
0197 0201 0208 0210 0217 0218 0221 0227 0228 0233 0236
0237 0242 0243 0245 0246 0252 0257 0260 0263 0264 0268
0270 0273 0274 0278 0297 0302 0304 0307 0310 0318 0319
0321 0325 0327 0329 0331 0332 0335 0347 0352 0354 0355
0367 0373 0374 0377 0378 0379 0381 0385 0387 0390 0395
0402 0406 0411 0413 0415 0424 0430 0433 0434 0435 0438
0446 0447 0450 0459 0467 0470 0483 0528 0538 0541 0544
0545 0546 0556 0559 0561 0562 0582 0585 0590 0598 0643
0646 0651 0668 0793 0800
002
(5) Configuration definition
**CONF 001
Config. 001 is valid for the aircraft on which:
- MOD No. 54880D46192 (Service Bulletin No. A340-27-4136) or
- MOD No. 55780D46390 (Service Bulletin No. A340-27-4177) or
- MOD No. 54881D46193 (Service Bulletin No. A340-27-4143) are not embodied.
**CONF 002
Config. 002 is valid for the aircraft on which:
- MOD No. 54880D46192 (Service Bulletin No. A340-27-4136) or
- MOD No. 55780D46390 (Service Bulletin No. A340-27-4177) or
- MOD No. 54881D46193 (Service Bulletin No. A340-27-4143) are embodied
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A340
SERVICE BULLETIN
and on which:
- MOD No. 52269D44449 , MOD No 52269D44450 and MOD No. 56056C10650 are
not embodied or
- Service Bulletin A330-92-3046 is not accomplished.
(6) Material Effectivity
**CONF 001
None
**CONF 002
MATERIAL
 QTY PER A/C
 SEE NOTES
Equipment BFEA01
 1
**CONF ALL
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
The Trimmable Horizontal Stabilizer Actuator (THSA) is composed of a ball nut, which
forms the primary load path and a threaded nut as a secondary load path. Both run on
the screw shaft. In case of failure of the primary load path, loads are transferred to the
secondary one. When the secondary nut is loaded, the friction increases between the
titanium nut and steel screw due to material characteristics.
Investigations of the THSA transfer tube have indicated that the secondary nut does not
lock the THSA after few movements as expec ted under certain cyclic load conditions but
continues to operate with high friction which results in damaging the screw and the
secondary nut.
Operation of the secondary load path is detected by the Flight Control Primary
Computers (FCPC) if the THSA efficiency decreases to such an extent that the position
error monitoring threshold is exceeded. If this condition remains undetected, a primary
load path failure may result in damaging the screw and secondary nut and, in extreme
cases, in failure of the actuator.
(2) Objective/Action
This Service Bulletin introduces a repetitive detailed visual inspection of the THSA ball
screw assy, a check of the gap between the secondary nut tenons and the transfer
plates with a feeler gage or a detailed inspection of the checkable shear-pins.
(3) Advantages
The accomplishment of this Service Bulletin will ensure the reliable function of the
THSA.
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A340
SERVICE BULLETIN
(4) Operational/Maintenance Consequences
The Operational/Maintenance Consequences of this Service Bulletin are covered by the
update of the affected publications detailed in "PLANNING INFORMATION".
Installation of THSA fitted with Checkable Shear-Pin (PN 47147-700/710 or PN
47172-500/510/520/530) and associated to electrical harness (MOD No 52269D44449 or
MOD No 52269D44450 and MOD No 56056C10650 embodiment or Service Bulletin No
A340-92-4056 accomplishment) is a terminating action and cancels the requirements of
the Inspection Service Bulletin No A340-27-4107.
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
**CONF 001
Task 274107-832-801-001: Detailed Inspection of the THSA Ball Screw Assy of the THSA PN
47147-500 or PN 47172-300
(1) Do a Detailed Inspection of the THSA Ball Screw Assy
(2) Depending on inspection results, lubricate the THSA
Task 274107-833-801-001: Replacement of the THSA
(1) Depending on inspection results, replace the THSA
**CONF 002
Task 274107-832-802-001: Detailed Inspection of the THSA Ball Screw Assy of the THSA PN
47147-700/710 or PN 47172-500/510/520/530
(1) Do a Detailed Inspection of the THSA Ball Screw Assy
(2) Depending on inspection results, do a Detailed Inspection of the CSP
(3) Depending on inspection results, lubricate the THSA
Task 274107-833-801-001: Replacement of the THSA
(1) Depending on inspection results, replace the THSA
Task 274107-833-802-001: Replacement of the CSP
(1) Depending on inspection results, replace the CSP
**CONF ALL
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 5
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A340
SERVICE BULLETIN
(2) Accomplishment Timescale
**CONF 001
This Service Bulletin has been classified Mandatory by the issue of an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA). The AD must
be used as the reference document for the mandated accomplishment timescale.
Table 1, Conf. 001 - Detailed Inspection of THSA Ball Screw Assy of the THSA PN 47147-500 or PN
47172-300
Condition
 Action
 Compliance Time
 Repetitive interval
All Aircraft
 Check the THSA PN in
accordance with TASK
274107-832-801-001
No later than 700 Flight
Hours (FH) from last
inspection
Or
At each THSA
installation
None
THSA PN 47147-500 or
PN 47172-300 is not
installed
Do a detailed inspection
of the THSA ball screw
assy of the THSA PN
47147-700/710 or PN
47172-500/510/520/530
in accordance with
TASK
274107-832-802-001
Refer to Table 1, Conf. 002
THSA PN 47147-500 or
PN 47172-300 is
installed
Do a detailed inspection
of the THSA ball screw
assy in accordance with
TASK
274107-832-801-001
Before next flight
 None
Lubricate the THSA in
accordance with
SUBTASK
274107-833-001-001
And
Before next flight
 None
Gage-feeler 0.40 mm
(0.0157 in.) moves
freely between the
interfaces of secondary
nut tenons and the
transfer plates
 Repeat the detailed
inspection of the THSA
ball screw assy in
accordance with TASK
274107-832-801-001
None
 Not exceeding 700 FH
Or
At each THSA
installation
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 6
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A340
SERVICE BULLETIN
Table 1, Conf. 001 - Detailed Inspection of THSA Ball Screw Assy of the THSA PN 47147-500 or PN
47172-300
Condition
 Action
 Compliance Time
 Repetitive interval
Replace the THSA in
accordance with TASK
274107-833-801-001
See NOTE (*)
And
Before next flight
 None
Gage-feeler 0.40 mm
(0.0157 in.) doesn’t
move freely between the
interfaces of secondary
nut tenons and the
transfer plates
 Repeat the detailed
inspection of the THSA
ball screw assy in
accordance with TASK
274107-832-801-001 or
TASK
273102-832-802-001
None
 Not exceeding 700 FH
Or
At each THSA
installation
NOTE (*): Installation of the THSA fitted with CSP (PN 47147-700/710 or PN 47172-500/510/520/530)
and associated to electrical harness (MOD No. 52269D44449 or MOD No. 52269D44450 and MOD
No. 56056C10650 embodiment or Service Bulletin No. A330-92-4056 accomplishment) is a termating
action and cancels the Inspection Service Bulletin No. A340-27-4107 requirement.
**CONF 002
This Service Bulletin has been classified Mandatory by the issue of an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA). The AD must
be used as the reference document for the mandated accomplishment timescale.
Table 1, Conf. 002 - Detailed Inspection of the THSA Ball Screw Assy PN 47147-700/710 or PN
47172-500/510/520/530
Condition
 Action
 Compliance Time
 Repetitive interval
All Aircraft
 Check the THSA PN in
accordance with TASK
274107-832-802-001
No later than 700 Flight
Hours (FH) from last
inspection
Or
At each THSA
installation
None
THSA PN
47147-700/710 or PN
47172-500/510/520/530
is not installed
Do a detailed inspection
of the THSA ball screw
assy of the THSA PN
47147-500 or PN
47172-300 in
accordance with TASK
274107-832-801-001
Refer to Table1, Conf. 001
THSA PN
47147-700/710 or PN
47172-500/510/520/530
is installed
Do a detailed inspection
of the CSP in
accordance with TASK
274107-832-802-001
Before next flight
 None
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 7
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A340
SERVICE BULLETIN
Table 1, Conf. 002 - Detailed Inspection of the THSA Ball Screw Assy PN 47147-700/710 or PN
47172-500/510/520/530
Condition
 Action
 Compliance Time
 Repetitive interval
Lubricate the THSA in
accordance with
SUBTASK
274107-833-002-001
And
Before next flight
 None
Length of each check
buttons less or equal
than 10 mm (0.3937 in.)
Repeat the detailed
inspection of the CSP in
accordance with TASK
274107-832-802-001
None
 Not exceeding 700 FH
Or
At each THSA
installation
Replace the THSA in
accordance with TASK
274107-832-801-001
See NOTE (*)
And
Before next flight
 None
Length of each check
buttons greater than 10
mm (0.3937 in.)
Repeat the detailed
inspection of the CSP in
accordance with TASK
274107-832-802-001
None
 Not exceeding 700 FH
Or
At each THSA
installation
Remove the CSP in
accordance with
SUBTASK
274107-900-002-001
And
Before next flight
 None
Do a detailed inspection
of the location of the
rupture on the CSP in
accordance with
SUBTASK
274107-832-003-001
And
Refer to Table 2, Conf. 002
Only one check button
greater than 10 mm
(0.3937 in.)
Repeat the detailed
inspection of the CSP in
accordance with TASK
274107-832-802-001 or
TASK
274107-832-801-001
None
 Not exceeding 700 FH
Or
At each THSA
installation
NOTE (*): Installation of the THSA fitted with CSP (PN 47147-700/710 or PN 47172-500/510/520/530)
and associated to electrical harness (MOD No. 52269D44449 or MOD No. 52269D44450 and MOD
No. 56056C10650 embodiment or Service Bulletin No. A330-92-4056 accomplishment) is a termating
action and cancels the Inspection Service Bulletin No. A340-27-4107 requirement.
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 8
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A340
SERVICE BULLETIN
Table 2, Config. 002 - Detailed Inspection of the location of the rupture on the CSP
Condition
 Action
 Compliance time
 Repetitive interval
All aircraft
 Do a detailed inspection
of the location of the
rupture on the CSP in
accordance with
SUBTASK
274107-832-003-001
Before next flight
 None
Install a new CSP in
accordance with
SUBTASK
274107-900-002-001
And
Before next flight
 None
Rupture not located at
the groove of the CSP
Lubricate the THSA in
accordance with
SUBTASK
274107-833-002-001
Before next flight
 None
Rupture located at the
groove of the CSP
Replace the THSA in
accordance with TASK
274107-833-801-001
Before next flight
 None
**CONF ALL
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA.21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
**CONF 001
Task 274107-832-801-001: Detailed Inspection of the THSA Ball Screw Assy of the THSA PN
47147-500 or PN 47172-300
Get Access
 2.00
On Aircraft
Do a Detailed Inspection of the THSA Ball Screw Assy
 1.00
Depending on inspection results, lubricate the THSA
 1.00
Close-Up
 2.00
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 9
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A340
SERVICE BULLETIN
Task 274107-832-801-001: Detailed Inspection of the THSA Ball Screw Assy of the THSA PN
47147-500 or PN 47172-300
TOTAL MANHOURS
 6.00
ELAPSED TIME (HOURS)
 6.00
Task 274107-832-802-001: Detailed Inspection of the THSA Ball Screw Assy of the THSA PN
47147-700/710 or PN 47172-500/510/520/530
On Aircraft
TOTAL MANHOURS
 0.00
Task 274107-833-801-001: Replacement of the THSA
Get Access
 2.00
On Aircraft
Depending on inspection results, replace the THSA
 18.00
Tests
 1.00
Close-Up
 2.00
TOTAL MANHOURS
 23.00
ELAPSED TIME (HOURS)
 14.00
Task 274107-833-802-001: Replacement of the CSP
On Aircraft
TOTAL MANHOURS
 0.00
NOTE
: The minimum manhours necessary to accomplish this Service Bulletin are
those for the Inspection. Depending on the inspection result, additional
manhours can apply.
**CONF 002
Task 274107-832-801-001: Detailed Inspection of the THSA Ball Screw Assy of the THSA PN
47147-500 or PN 47172-300
On Aircraft
TOTAL MANHOURS
 0.00
Task 274107-832-802-001: Detailed Inspection of the THSA Ball Screw Assy of the THSA PN
47147-700/710 or PN 47172-500/510/520/530
Get Access
 2.00
On Aircraft
Do a Detailed Inspection of the THSA Ball Screw Assy
 1.00
Depending on inspection results, do a Detailed
Inspection of the CSP
0.50
Depending on inspection results, lubricate the THSA
 1.00
Close-Up
 2.00
TOTAL MANHOURS
 6.50
ELAPSED TIME (HOURS)
 5.00
Task 274107-833-801-001: Replacement of the THSA
Get Access
 2.00
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 10
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A340
SERVICE BULLETIN
Task 274107-833-801-001: Replacement of the THSA
On Aircraft
Depending on inspection results, replace the THSA
 18.00
Tests
 1.00
Close-Up
 2.00
TOTAL MANHOURS
 23.00
ELAPSED TIME (HOURS)
 14.00
Task 274107-833-802-001: Replacement of the CSP
Get Access
 2.00
On Aircraft
Depending on inspection results, replace the CSP
 1.00
Tests
 0.50
Close-Up
 2.00
TOTAL MANHOURS
 5.50
ELAPSED TIME (HOURS)
 5.50
NOTE
: The minimum manhours necessary to accomplish this Service Bulletin are
those for the Inspection. Depending on the inspection result, additional
manhours can apply.
**CONF ALL
H. WEIGHT AND BALANCE
Not Changed
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
**CONF 001
Aircraft Maintenance Manual (AMM)
 06-20-00 06-31-53 06-41-53
12-22-27 12-34-24 27-44-51
27-44-59
Consumable Material List (CML)
Elec. Std. Practices Manual (ESPM)
 20-55-00
Service Bulletin (SB)
 A340-27-4107
A340-27-4136
A340-27-4143
A340-27-4177
**CONF 002
Aircraft Maintenance Manual (AMM)
 06-20-00 06-31-53 06-41-53
12-22-27 12-34-24 27-44-51
27-44-59
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 11
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A340
SERVICE BULLETIN
Consumable Material List (CML)
Elec. Std. Practices Manual (ESPM)
 20-55-00
Service Bulletin (SB)
 A340-27-4107
A340-27-4136
A340-27-4143
A340-27-4177
A330-92-3046
**CONF ALL
K. PUBLICATION AFFECTED
Airworthiness Limitation Section (ALS)
 Airworthiness Limitation Section
(ALS) Part 4
Aircraft Maintenance Manual (AMM)
 27-44-51
Maintenance Planning Document (MPD)
 27-44-00
L. INTERCHANGEABILITY/MIXABILITY
Not Applicable
M. SPARES
None
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 12
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A340
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
Vendor parts are to be procured from:
Equipment BFEA01
 UTAS Goodrich Corporation - Aerostructures
Group
850 Lagoon Drive
Chula Vista, CA 91910-2098
Attn: Direct Airline Sales
Ordering website: parts.asg.goodrich.com
email: sparesales@utas.utc.com
(2) Price and Availability
Equipment BFEA01
No AIRBUS kit will be provided.
Procurement terms for the equipment must be negotiated with the equipment supplier.
B. INDUSTRY SUPPORT INFORMATION
AIRBUS will not provide industry support for accomplishment of this Service Bulletin.
C. LIST OF COMPONENTS
No Kit
D. LIST OF MATERIALS - OPERATOR SUPPLIED
(1) Consumable Materials
None
(2) Components
NOTE
: To accomplish this Service Bulletin it is necessary to use the expendable
parts listed in the subsequent referenced task:
- AMM Task 27-44-51-400-801
- AMM Task 27-44-59-400-801
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 13
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A340
SERVICE BULLETIN
(3) Equipment
Equipment BFEA01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
450664-100
 1
 PIN
NOTE
: The above list if components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
F. TOOLING
(1) Tooling - Price and Availability
None
(2) Tools
NOTE
: To accomplish this Service Bulletin it is necessary to use the tools listed
in the subsequent re ferenced tasks:
- AMM Task 27-44-51-000-801
- AMM Task 27-44-51-400-801
- AMM Task 27-44-51-210-807
- AMM Task 27-44-59-000-801
- AMM Task 27-44-59-400-801
(3) Special Tools
None
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 14
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A340
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 274107-832-801-001 - Detailed Inspection of the THSA Ball Screw Assy of the THSA PN
47147-500 or PN 47172-300
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC. AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
"refer to" are used and the operator has a procedure accepted by the local
authority he belongs to, the accepted alternative procedure can be used. When the
words "in accordance with" are used then the given procedure must be followed
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms
NOTE
: The purpose of flow charts is to supplement the information given in the Procedure
and Compliance paragraphs and not to serve as the primary source for tasks or
compliances times given in this Service Bulletin.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. Other paragraphs are recommended and may be deviated
from, done as part of other actions or done with accepted methods different from
those given in the Service Bulletin, as long as the RC paragraphs can be done and
the aircraft can be put back into a serviceable condition
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 15
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A340
SERVICE BULLETIN
Task Associated Data
**CONF 001
Zone
312
Access
Door
 312AR
Manpower
TOTAL MANHOURS
 6.00
ELAPSED TIME (HOURS)
 6.00
**CONF 002
Manpower
TOTAL MANHOURS
 0.00
**CONF ALL
A. GENERAL
**CONF 001
(1) Subtask 274107-910-001-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
Consumable Material List (CML)
(a) For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Material List (CML).
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(d) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
(2) Subtask 274107-839-001-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 16
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29

@A340
SERVICE BULLETIN
**CONF 002
None
**CONF ALL
B. PREPARATION
**CONF 001
(1) Subtask 274107-941-001-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-860-802
Task 27-44-51-210-805
NOTE
: If aircraft have accomplished the Preparation procedure of the
TASK 274107-832-802-001 (config. 002), the subsequent Preparation
procedure is not necessary.
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
- Aircraft electrical network de-energized
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position.
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Do the Job Set-up procedure as specified in the detailed inspection of THSA Ball
Screw Assy, refer to AMM Task 27-44-51-210-805.
**CONF 002
None
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 17
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 30

@A340
SERVICE BULLETIN
**CONF ALL
C. PROCEDURE
**CONF 001
(1) Subtask 274107-832-001-001 - Do a Detailed Inspection of the THSA Ball Screw
Assy
Work Zones and Access Panels
Zone
 Access/Work location
312
 Access
 Door 312AR
Manpower Resources
Manhours
 1.00
Minimum number of person
 1
Subtask elapsed time
 1.00
Skills
 NON DESTRUCTIVE
TESTING
References
Aircraft Maintenance Manual (AMM)
 Task 27-44-51-210-805
Fig. A-FBAAA
Inspection of the THSA Ball Screw Assy
Sheet 01
Fig. A-FFAAA
Flow-Chart
Sheet 01
Fig. A-FRAAA
Inspection Report
Sheet 01
(a) At the threshold given in PLANNING INFORMATION paragraph E.(2):
Refer to Fig. A-FFAAA
1
 Check the THSA PN:
a
 If the THSA PN installed is not the PN 47147-500 or PN 47172-300:
<1> Do TASK 274107-832-802 001 Detailed Inspection of the THSA
Ball Screw Assy of the THSA PN 47147-700/710 or PN
47172-500/510/520/530 at the threshold given in the planning
information paragraph E.(2).
NOTE
: For the detailed inspection, aircraft shall be
inspected in accordance with the inspection
procedure given in Config. 002 of this Inspection
Service Bulletin.
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 18
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 31

@A340
SERVICE BULLETIN
b
 If the THSA PN installed is the PN 47147-500 or 47172-300:
<1> Do a detailed inspection of the THSA Ball Screw Assy of the
THSA PN 47147-500 or PN 47172-300, refer to AMM Task
27-44-51-210-805.
Refer to Fig. A-FBAAA
<a> If Gage-feeler 0.40 mm (0.0157 in.) moves freely:
[1] Do SUBTASK 274107-833-001 001 Depending on
inspection results, lubricate the THSA before next flight.
And
Repeat the detailed inspection of THSA, in accordance
with TASK 274107-832-801 001 Detailed Inspection of the
THSA Ball Screw Assy of the THSA PN 47147-500 or
PN 47172-300 or TASK 274107-832-802 001 Detailed
Inspection of the THSA Ball Screw Assy of the THSA
PN 47147-700/710 or PN 47172-500/510/520/530 at the
interval given in the planning information paragraph E.(2).
<b> If Gage-feeler 0.40 mm (0.0157 in.) doesn’t move freely:
[1] Do TASK 274107-833-801 001 Replacement of the THSA
before next flight.
And
Repeat the detailed inspection of THSA, in accordance
with TASK 274107-832-801 001 Detailed Inspection of the
THSA Ball Screw Assy of the THSA PN 47147-500 or
PN 47172-300 or TASK 274107-832-802 001 Detailed
Inspection of the THSA Ball Screw Assy of the THSA
PN 47147-700/710 or PN 47172-500/510/520/530 at the
interval given in the planning information paragraph E.(2).
(b) Send inspection report to AIRBUS, refer to Fig. A-FRAAA
.
(2) Subtask 274107-833-001-001 - Depending on inspection results, lubricate the THSA
Work Zones and Access Panels
Zone
 Access/Work location
312
 Access
 Door 312AR
Manpower Resources
Manhours
 1.00
Minimum number of person
 1
Subtask elapsed time
 1.00
Skills
 LUBRICATION
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 19
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 32

@A340
SERVICE BULLETIN
References
Aircraft Maintenance Manual (AMM)
 Task 12-22-27-640-801
(a) Perform the lubrication of the THSA Ball Screw-Nut, refer to AMM Task
12-22-27-640-801.
**CONF 002
None
**CONF ALL
D. TEST
**CONF 001
None
**CONF 002
None
**CONF ALL
E. CLOSE-UP
**CONF 001
(1) Subtask 274107-942-001-001 - Close-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-44-51-210-805
NOTE
: If you intend to accomplish an associated Repair Task during the same
layover period, the subsequent Close-up procedure is not necessary.
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified after the Detailed Inspection of THSA Ball
Screw Assy, refer to AMM Task 27-44-51-210-805.
(c) Put the aircraft back to initial configuration.
**CONF 002
None
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 20
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 33

@A340
SERVICE BULLETIN
Task 274107-832-802-001 - Detailed Inspection of the THSA Ball Screw Assy of the THSA PN
47147-700/710 or PN 47172-500/510/520/530
**CONF ALL
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC. AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
"refer to" are used and the operator has a procedure accepted by the local
authority he belongs to, the accepted alternative procedure can be used. When the
words "in accordance with" are used then the given procedure must be followed
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms
NOTE
: The purpose of flow charts is to supplement the information given in the Procedure
and Compliance paragraphs and not to serve as the primary source for tasks or
compliance times given in this Service Bulletin.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. Other paragraphs are recommended and may be deviated
from, done as part of other actions or done with accepted methods different from
those given in the Service Bulletin, as long as the RC paragraphs can be done and
the aircraft can be put back into a serviceable condition
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 21
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 34

@A340
SERVICE BULLETIN
Task Associated Data
**CONF 001
Manpower
TOTAL MANHOURS
 0.00
**CONF 002
Zone
312
Access
Door
 312AR
Manpower
TOTAL MANHOURS
 6.50
ELAPSED TIME (HOURS)
 5.00
**CONF ALL
A. GENERAL
**CONF 001
None
**CONF 002
(1) Subtask 274107-910-002-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
Consumable Material List (CML)
(a) For the specification of materials (Mat No.) given in this Service Bulletin, refer to
the Consumable Materials List (CML).
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(d) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
(2) Subtask 274107-839-002-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 22
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 35

@A340
SERVICE BULLETIN
Write in the applicable aircraft records that you have done all the work give in this
Service Bulletin.
**CONF ALL
B. PREPARATION
**CONF 001
None
**CONF 002
(1) Subtask 274107-941-003-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-860-802
Task 27-44-51-210-807
Task 27-44-51-210-810
NOTE
: If aircraft have accomplished the Preparation procedure of the
TASK 274107-832-801-001 (config. 001), the subsequent Preparation
procedure is not necessary.
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
- Aircraft electrical network de-energized
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position.
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 23
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 36

@A340
SERVICE BULLETIN
(b) Do the Job Set-up procedure as specified in the detailed inspection of the THSA
Ball Screw Assy, refer to AMM Task 27-44-51-210-810.
(c) Do the Job Set-up procedure as specified in the detailed inspection of the
Checkable Shear-Pin, refer to AMM Task 27-44-51-210-807.
**CONF ALL
C. PROCEDURE
**CONF 001
None
**CONF 002
(1) Subtask 274107-832-002-001 - Do a Detailed Inspection of the THSA Ball Screw
Assy
Work Zones and Access Panels
Zone
 Access/Work location
312
 Access
 Door 312AR
Manpower Resources
Manhours
 1.00
Minimum number of person
 1
Subtask elapsed time
 1.00
Skills
 NON DESTRUCTIVE
TESTING
References
Aircraft Maintenance Manual (AMM)
 Task 27-44-51-210-807
Task 27-44-51-210-810
Fig. A-FBAAB
Inspection of the THSA Ball Screw Assy
Sheet 01
Fig. A-FRAAB
Inspection Report
Sheet 01
Fig. A-FFAAB
Flow-Chart
Sheet 01
(a) At the threshold given in the PLANNING INFORMATION paragraph E.(2):
Refer to Fig. A-FFAAB
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 24
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 37

@A340
SERVICE BULLETIN
1
 Check the THSA PN:
a
 If the THSA PN installed is not the PN 47147-700/710 or PN
47172-500/510/520/530:
<1> Do TASK 274107-832-801 001 Detailed Inspection of the THSA Ball
Screw Assy of the THSA PN 47147-500 or PN 47172-300 at the
threshold given in the planning information paragraph E.(2).
NOTE
: For the detailed inspection, aircraft shall be
inspected in accordance with the inspection
procedure given in Cofig. 001 of this Inspection
Service Bulletin.
b
 If the THSA PN installed is the PN 47147-700/710 or PN
47172-500/510/520/530:
<1> Do a detailed inspection of the THSA ball screw assy, refer to AMM
Task 27-44-51-210-810.
<2> Do a detailed inspection of the CSP of the THSA PN
47147-700/710 or PN 47172-500/510/520/530, refer to AMM Task
27-44-51-210-807.
Refer to Fig. A-FBAAB
<a> If the length of each check buttons is less or equal than 10 mm
(0.3937 in.):
[1] Do SUBTASK 274107-833-002 001 Depending on
inspection results, lubricate the THSA before next flight.
And
Repeat the detailed inspection of the CSP in accordance
with TASK 274107-832-802 001 Detailed Inspection of the
THSA Ball Screw Assy of the THSA PN 47147-700/710
or PN 47172-500/510/520/530 or TASK 274107-832-801
001 Detailed Inspection of the THSA Ball Screw Assy of
the THSA PN 47147-500 or PN 47172-300 at the interval
given in the PLANNING INFORMATION paragraph E.(2).
<b> If the length of each check buttons is greater than 10 mm
(0.3937 in.):
[1] Do TASK 274107-833-801 001 Replacement of the THSA
before next flight.
And
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 25
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 38

@A340
SERVICE BULLETIN
Repeat the detailed inspection of the CSP in accordance
with TASK 274107-832-802 001 Detailed Inspection of the
THSA Ball Screw Assy of the THSA PN 47147-700/710
or PN 47172-500/510/520/530 or TASK 274107-832-801
001 Detailed Inspection of the THSA Ball Screw Assy of
the THSA PN 47147-500 or PN 47172-300 at the interval
given in the PLANNING INFORMATION paragraph E.(2).
<c> If only one check button is greater than 10 mm (0.3937 in.):
[1] Remove the CSP in accordance with SUBTASK
274107-900-002 001 Depending on inspection results,
replace the CSP before next flight.
And
Do SUBTASK 274107-832-003 001 Depending on
inspection results, do a Detailed Inspection of the CSP
before next flight.
And
Repeat the detailed inspection of the CSP in accordance
with TASK 274107-832-802 001 Detailed Inspection of the
THSA Ball Screw Assy of the THSA PN 47147-700/710
or PN 47172-500/510/520/530 or TASK 274107-832-801
001 Detailed Inspection of the THSA Ball Screw Assy of
the THSA PN 47147-500 or PN 47172-300 at the interval
given in the PLANNING INFORMATION paragraph E.(2).
(b) Send the inspection report to AIRBUS, refer to Fig. A-FRAAB
.
(2) Subtask 274107-832-003-001 - Depending on inspection results, do a Detailed
Inspection of the CSP
Work Zones and Access Panels
Zone
 Access/Work location
312
 Access
 Door 312AR
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 NON DESTRUCTIVE
TESTING
References
Aircraft Maintenance Manual (AMM)
 Task 27-44-51-210-807
Fig. A-FBBAA
Inspection of the CSP
Sheet 01
Sheet 02
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 26
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 39

@A340
SERVICE BULLETIN
References
Fig. A-FFAAB
Flow-Chart
Sheet 01
(a) Do a Detailed Inspection of the CSP, refer to AMM Task 27-44-51-210-807.
Refer to Fig. A-FFAAB
Refer to Fig. A-FBBAA
1
 If the rupture is located at the groove of the CSP:
Replace the THSA before the subsequent flight, in accordance with TASK
274107-833-801 001 Replacement of the THSA
2
 If the rupture is not located at the groove of the CSP:
Replace the failed checkable shear-pin before the subsequent flight, in
accordance with TASK 274107-833-802 001 Replacement of the CSP before
next flight.
And
Lubricate the THSA in accordance with SUBTASK 274107-833-002 001
Depending on inspection results, lubricate the THSA before next flight.
(3) Subtask 274107-833-002-001 - Depending on inspection results, lubricate the THSA
Work Zones and Access Panels
Zone
 Access/Work location
312
 Access
 Door 312AR
Manpower Resources
Manhours
 1.00
Minimum number of person
 1
Subtask elapsed time
 1.00
Skills
 LUBRICATION
References
Aircraft Maintenance Manual (AMM)
 Task 12-22-27-640-801
(a) Perform the lubrication of the THSA Ball Screw-Nut, refer to AMM Task
12-22-27-640-801.
**CONF ALL
D. TEST
**CONF 001
None
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 27
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 40

@A340
SERVICE BULLETIN
**CONF 002
None
**CONF ALL
E. CLOSE-UP
**CONF 001
None
**CONF 002
(1) Subtask 274107-942-003-001 - Close-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-44-51-210-807
Task 27-44-51-210-810
NOTE
: If you intend to accomplish an associated Repair Task during the same
layover period, the subsequent Close-up procedure is not necessary.
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified after the Detailed Inspection of the CSP,
refer to AMM Task 27-44-51-210-807.
(c) Do the Close-up procedure as specified after the detailed inspection of the THSA
Ball Screw Assy, refer to AMM Task 27-44-51-210-810.
(d) Put the aircraft back to its initial configuration.
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 28
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 41

@A340
SERVICE BULLETIN
Task 274107-833-801-001 - Replacement of the THSA
**CONF ALL
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC. AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
"refer to" are used and the operator has a procedure accepted by the local
authority he belongs to, the accepted alternative procedure can be used. When the
words "in accordance with" are used then the given procedure must be followed
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. Other paragraphs are recommended and may be deviated
from, done as part of other actions or done with accepted methods different from
those given in the Service Bulletin, as long as the RC paragraphs can be done and
the aircraft can be put back into a serviceable condition
NOTE
: Discarded parts must be managed at the operator’s discretion.
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 29
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 42

@A340
SERVICE BULLETIN
Task Associated Data
**CONF 001
Zone
312
Modified FIN
1CS
Access
Door
 312AR
Manpower
TOTAL MANHOURS
 23.00
ELAPSED TIME (HOURS)
 14.00
**CONF 002
Zone
312
Modified FIN
1CS
Access
Door
 312AR
Manpower
TOTAL MANHOURS
 23.00
ELAPSED TIME (HOURS)
 14.00
**CONF ALL
A. GENERAL
**CONF 001
(1) Subtask 274107-910-004-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
Consumable Material List (CML)
(a) For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Material List (CML).
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 30
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 43

@A340
SERVICE BULLETIN
(d) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
(2) Subtask 274107-839-004-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 002
(1) Subtask 274107-910-004-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
Consumable Material List (CML)
(a) For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Material List (CML).
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(d) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
(2) Subtask 274107-839-004-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF ALL
B. PREPARATION
**CONF 001
(1) Subtask 274107-941-002-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 31
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 44

@A340
SERVICE BULLETIN
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-860-802
Task 27-44-51-000-801
NOTE
: If you intend to accomplish this Repair Task during the same layover
period as the associated Inspection, the subsequent Preparation
procedure is not necessary except the Job Set-up procedure as
specified in the removal of the THSA Actuator, refer to AMM Task
27-44-51-000-801.
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
- Aircraft electrical network de-energized
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position.
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Do the Job Set-up procedure as specified in the Removal of the THSA, refer to
AMM Task 27-44-51-000-801.
**CONF 002
(1) Subtask 274107-941-002-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-860-802
Task 27-44-51-000-801
NOTE
: If you intend to accomplish this Repair Task during the same layover
period as the associated Inspection, the subsequent Preparation
procedure is not necessary except the Job Set-up procedure as
specified in the removal of the THSA Actuator, refer to AMM Task
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 32
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 45

@A340
SERVICE BULLETIN
27-44-51-000-801.
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
- Aircraft electrical network de-energized
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position.
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Do the Job Set-up procedure as specified in the Removal of the THSA, refer to
AMM Task 27-44-51-000-801.
**CONF ALL
C. PROCEDURE
**CONF 001
(1) Subtask 274107-900-001-001 - Depending on inspection results, replace the THSA
Work Zones and Access Panels
Zone
 Access/Work location
312
 Access
 Door 312AR
Manpower Resources
Manhours
 18.00
Minimum number of person
 2
Subtask elapsed time
 9.00
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 27-44-51-000-801
Task 27-44-51-400-801
Service Bulletin (SB)
 A340-27-4107
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 33
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 46

@A340
SERVICE BULLETIN
(a) Remove the THSA:
Refer to AMM Task 27-44-51-000-801.
FIN 1CS
1 THS Actuator 47147-500 Discard
Or
FIN 1CS
1 THS Actuator 47172-300 Discard
(b) Install a serviceable THSA, FIN 1CS, refer to AMM Task 27-44-51-400-801.
NOTE
: A serviceable THSA is a THSA that has been successfully
inspected in accordance with this Inspection Service Bulletin No.
A340-27-4107 and having accumulated less than 700 FH since last
inspection.
**CONF 002
(1) Subtask 274107-900-001-002 - Depending on inspection results, replace the THSA
Work Zones and Access Panels
Zone
 Access/Work location
312
 Access
 Door 312AR
Manpower Resources
Manhours
 18.00
Minimum number of person
 2
Subtask elapsed time
 9.00
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 27-44-51-000-801
Task 27-44-51-400-801
Service Bulletin (SB)
 A340-27-4107
(a) Remove the THSA:
Refer to AMM Task 27-44-51-000-801
FIN 1CS
1 THS Actuator 47147-700 Discard
Or
FIN 1CS
1 THS Actuator 47147-710 Discard
Or
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 34
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 47

@A340
SERVICE BULLETIN
FIN 1CS
1 THS Actuator 47172-500 Discard
Or
FIN 1CS
1 THS Actuator 47172-510 Discard
Or
FIN 1CS
1 THS Actuator 47172-520 Discard
Or
FIN 1CS
1 THS Actuator 47172-530 Discard
(b) Install a serviceable THSA, FIN 1CS, refer to AMM Task 27-44-51-400-801.
NOTE
: A serviceable THSA is a THSA that has been successfully
inspected in accordance with this Inspection Service Bulletin No.
A340-27-4107 and having accumulated less tha 700 FH since last
inspection.
**CONF ALL
D. TEST
**CONF 001
(1) Subtask 274107-700-001-001 - Test
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-44-51-400-801
(a) Job Set-up:
1
 Remove the Safety clips and tags and close the circuit breakers as specified
after the Installation of the Trimmable Horizontal Stabilizer (THS) Actuator (FIN
1CS), refer to AMM Task 27-44-51-400-801.
(b) Procedure:
1
 Do the test procedure as specified after the Installation of the THSA (FIN
1CS), refer to AMM Task 27-44-51-400-801.
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 35
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 48

@A340
SERVICE BULLETIN
**CONF 002
(1) Subtask 274107-700-001-001 - Test
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-44-51-400-801
(a) Job Set-up:
1
 Remove the Safety clips and tags and close the circuit breakers as specified
after the Installation of the Trimmable Horizontal Stabilizer (THS) Actuator (FIN
1CS), refer to AMM Task 27-44-51-400-801.
(b) Procedure:
1
 Do the test procedure as specified after the Installation of the THSA (FIN
1CS), refer to AMM Task 27-44-51-400-801.
**CONF ALL
E. CLOSE-UP
**CONF 001
(1) Subtask 274107-942-002-001 - Close-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-44-51-400-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified after the Installation of the THSA, refer to
AMM Task 27-44-51-400-801.
(c) Put the aircraft back to initial configuration.
**CONF 002
(1) Subtask 274107-942-002-002 - Close-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-44-51-400-801
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 36
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 49

@A340
SERVICE BULLETIN
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified after the Installation of the THSA, refer to
AMM Task 27-44-51-400-801.
(c) Put the aircraft back to initial configuration.
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 37
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 50

@A340
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 38
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 51

@A340
SERVICE BULLETIN
Task 274107-833-802-001 - Replacement of the CSP
**CONF ALL
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC. AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
"refer to" are used and the operator has a procedure accepted by the local
authority he belongs to, the accepted alternative procedure can be used. When the
words "in accordance with" are used then the given procedure must be followed
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. Other paragraphs are recommended and may be deviated
from, done as part of other actions or done with accepted methods different from
those given in the Service Bulletin, as long as the RC paragraphs can be done and
the aircraft can be put back into a serviceable condition
NOTE
: Discarded parts must be managed at the operator’s discretion.
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 39
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 52

@A340
SERVICE BULLETIN
Task Associated Data
**CONF 001
Manpower
TOTAL MANHOURS
 0.00
**CONF 002
Zone
312
Access
Door
 312AR
Manpower
TOTAL MANHOURS
 5.50
ELAPSED TIME (HOURS)
 5.50
**CONF ALL
A. GENERAL
**CONF 001
None
**CONF 002
(1) Subtask 274107-910-003-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
Consumable Material List (CML)
(a) For the specification of materials (Mat No.) given in this Service Bulletin, refer to
Consumable Material List (CML).
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(d) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
(2) Subtask 274107-839-003-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 40
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 53

@A340
SERVICE BULLETIN
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF ALL
B. PREPARATION
**CONF 001
None
**CONF 002
(1) Subtask 274107-941-004-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-860-802
Task 27-44-59-000-801
Task 27-44-59-000-801
NOTE
: If you intend to accomplish this Repair Task during the same layover
period as the associated Inspection, the subsequent Preparation
procedure is not necessary except the Job Set-up procedure as specified
in the removal of the CSP, refer to AMM Task 27-44-59-000-801.
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
- Aircraft electrical network de-energized
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position.
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 41
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 54

@A340
SERVICE BULLETIN
(b) Do the Job Set-up procedure as specified in the Removal of the CSP, refer to AMM
Task 27-44-59-000-801.
**CONF ALL
C. PROCEDURE
**CONF 001
None
**CONF 002
(1) Subtask 274107-900-002-001 - Depending on inspection results, replace the CSP
Work Zones and Access Panels
Zone
 Access/Work location
312
 Access
 Door 312AR
Manpower Resources
Manhours
 1.00
Minimum number of person
 1
Subtask elapsed time
 1.00
Skills
 AIRFRAME
Material necessary to do the job
Equipment BFEA01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
450664-100
 1
 PIN
NOTE
: The above list if components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
References
Aircraft Maintenance Manual (AMM)
 Task 27-44-59-000-801
Task 27-44-59-400-801
Service Bulletin (SB)
 A340-27-4107
(a) Remove the CSP:
Refer to AMM Task 27-44-59-000-801
1 CSP 450664-100 Discard
(b) Install a brand new CSP:
Refer to AMM Task 27-44-59-400-801
1 CSP 450664-100
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 42
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 55

@A340
SERVICE BULLETIN
**CONF ALL
D. TEST
**CONF 001
None
**CONF 002
(1) Subtask 274107-700-002-001 - Testing
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-44-59-400-801
(a) Job Set-up:
1
 Remove the safety clips and tags and close the circuit breakers as specified
after the installation of the CSP, refer to AMM Task 27-44-59-400-801.
(b) Procedure:
1
 Do the test as specified after the Installation of the CSP, refer to AMM Task
27-44-59-400-801.
**CONF ALL
E. CLOSE-UP
**CONF 001
None
**CONF 002
(1) Subtask 274107-942-004-001 - Close-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-44-59-400-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified after the Installation of the CSP, refer to
AMM Task 27-44-59-400-801.
(c) Put the aircraft back to its initial configuration.
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 43
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 56

@A340
SERVICE BULLETIN
**CONF 001
BALL NUT ASSY
TO BE VISUALLY
INSPECTED
GAP TO BE
MEASURED
FR87
FR80
,  Z311 Z312
B
B C
A
312AR
A
Z300
C
F_SB_274107_5_BAAA_01_00
Figure A-FBAAA - Sheet 01
Inspection of the THSA Ball Screw Assy
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 44
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 57

@A340
SERVICE BULLETIN
**CONF 002
Z300
FR87
FR80
,  Z311 Z312
C
A
B
B
C
BALL NUT ASSY
TO BE VISUALLY
INSPECTED
CHECKABLE SHEAR
PIN TO BE
INSPECTED
CHECKABLE SHEAR
PIN TO BE
INSPECTED
312ARA
F_SB_274107_5_BAAB_01_00
Figure A-FBAAB - Sheet 01
Inspection of the THSA Ball Screw Assy
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 45
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 58

@A340
SERVICE BULLETIN
**CONF 002
C D
FR80
FR83
FR84
FR87
Z311 (Z312)
312AR
A
A
CHECK
BUTTON
CAP
CHECKABLE
1CS
SHEAR−PIN (CSP)
A
A
B
B C
C D
TYPICAL
Z300
F_SB_274107_5_BBAA_01_00
Figure A-FBBAA - Sheet 01
Inspection of the CSP
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 46
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 59

@A340
SERVICE BULLETIN
**CONF 002
TYPICAL
RUPTURE AT THREAD
GROOVE
TYPICAL
MAXIMUM DISTANCE 10 mm (0.39 in)
NOTE:
01
BUTTON
CHECK
CAP
01
A A
D
E
E
F_SB_274107_5_BBAA_02_00
Figure A-FBBAA - Sheet 02
Inspection of the CSP
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 47
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 60

@A340
SERVICE BULLETIN
**CONF 001
DO A DETAILED INSPECTION OF THE THS ACTUATOR BALL SCREW ASSY 
IN ACCORDANCE WITH SUBTASK 274107−832−001−001
GAGE−FEELER
MOVES FREELY ?
YESNO
REPLACE THE THS ACTUATOR IN
ACCORDANCE WITH TASK
274107−833−801−001
01BEFORE NEXT FLIGHT
LUBRICATE THE THS ACTUATOR IN
ACCORDANCE WITH SUBTASK
274107−833−001−001
BEFORE NEXT FLIGHT
REPEAT THE INSPECTION AT THE INTERVAL GIVEN IN 
THE PLANNING INFORMATION PARAGRAPH E.(2)
IN ACCORDANCE WITH TASK 274107−832−801−001
OR TASK 274107−832−802−001
INSTALLATION OF THS ACTUATOR FITTED WITH CHECKABLE SHEAR−PIN01
ELECTRICAL HARNESS (MOD No 52269D44449 AND MOD No 56056C10650
EMBODIMENT OR SERVICE BULLETTIN No A340−92−4056 ACCOMPLISHMENT)
IS A TERMINATING ACTION AND CANCELS THE INSPECTION SERVICE BULLETIN No A340−27−4107
THE PURPOSE OF FLOW CHARTS IS TO SUPPLEMENT THE INFORMATION GIVEN IN THE 
PROCEDURE AND COMPLIANCE PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY
SOURCE FOR TASKS OR COMPLIANCE TIMES GIVEN IN THIS SERVICE BULLETIN.
NOTE:
REQUIREMENT.
(PN 47147−700/710 OR PN 47172−500/510/520/530) AND ASSOCIATED TO
0.40 mm (0.0157 in)
02
A SERVICEABLE THS ACTUATOR IS A THS ACTUATOR THAT HAS BEEN SUCCESSFULLY02
 INSPECTED IN ACCORDANCE WITH THIS INSPECTION SERVICE BULLETIN No A340−27−4107
 AND HAVING ACCUMULATED LESS THAN 700 FH SINCE LAST INSPECTION.
DO A DETAILED INSPECTION OF THE THS ACTUATOR BALL SCREW
ASSY OF THE THS ACTUATOR PN 47147−500 OR PN 47172−300 AT
PN 47147−500 OR
INSTALLED ?
PN 47172−300
THS ACTUATOR
YES NO
THE THRESHOLD GIVEN IN THE PLANNING INFORMATION PARAGRAPH E.(2)
IN ACCORDANCE WITH TASK 274107−832−801−001
DO A DETAILED INSPECTION OF
THE THS ACTUATOR BALL SCREW ASSY
OF THE THS ACTUATOR PN 47147−700/710
OR PN 47172−500/510/520/530 
IN ACCORDANCE WITH TASK 
274107−832−802−001 03
03 AIRCRAFT SHOULD DO THE DETAILED INSPECTION IN ACCORDANCE WITH
FLOW CHART FIGURE A−FFAAB (CONFIG 002).
F_SB_274107_5_FAAA_01_04
Figure A-FFAAA - Sheet 01
Flow-Chart
DATE: May 30/02 SERVICE BULLETIN No.: A340-27-4107
REVISION No.: 09 - Mar 29/16 Page: 48
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

The text continues at https://openairdocs.org/service-documents/airbus/a340-27-4107/file/811af2df5f11.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
