# Airbus Service Bulletin A340-27-4211

Copy: No revision named ("A340-27-4211 R00"), 45 pages: PDF https://openairdocs.org/files/sha256/5b/dc/5bdc6e27b7e641c0db7816cb877ed31946e9629b54d55efb024efe2547d801d4; text https://openairdocs.org/service-documents/airbus/a340-27-4211/file/5bdc6e27b7e6.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2020-0456, the docket of AD 2020-17-16. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A340-27-4211
- Page: https://openairdocs.org/service-documents/airbus/a340-27-4211

## Text (45 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2020-0456, the docket of AD 2020-17-16. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A340
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 27
TITLE: FLIGHT CONTROLS - FLIGHT CONTROL DATA CONCENTRATOR
(FCDC) - INTRODUCE FCDC STD L26 M25 P16 ON BASIC A/C
**CONF ALL
MODIFICATIONS
MODIFICATION CLASSIFICATION
MAJOR
 204828S32944
MINOR
 None
NOTE
: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting the
airworthiness of the product. All other changes are major changes.
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
This Service Bulletin consists in introducing new Flight Control Data Concentrator (FCDC) software
Standard (STD) L26/M25/P16 which brings several improvements.
This Service Bulletin is published to enable operators of A340 with mechanical rudder control (MOD No.
49144S16279 not embodied) to apply the THALES AVIONICS Service Bulletin No. 87292337-27-035
which modifies the FCDCs.
In addition, considering pre-requistites of this Service Bulletin, its application entails:
- prior replacement of Flight Control Primary Computer (FCPC) 2K0 and 2K1 hardware by FCPC L25
standard (2K2 hardware) (refer to OIT 999.0020/16 and ISI 27.90.00045),
- prior upgrade of FWC up to L15 software standard (refer to ISI 27.90.00045),
- pin-programing and prior upgrade of SDAC up to C10 minimun software standard (refer to ISI
27.90.00045),
- change in FCPC interchangeability and mixability (refer to ISI 27.93.00007).
The new software standard can be embodied:
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A340
SERVICE BULLETIN
SUMMARY
- Either by replacement or reprogramming of the On Board Replaceable Modules (OBRMs)
- Or by replacement of the two FCDC units (1CE1 and 1CE2).
Accomplishment of this Service Bulletin brings the following advantages:
- FCDC capability for Stop Rudder Input Warning (SRIW) function which is expected to be mandated
on A340 with mechanical rudder control (refer to ISI 27.90.00.045 for further information of SRIW
function and associated pre-requistes).
- introduction of new maintenance messages related to force fighting monitoring (refer to TFU
27.95.00.045)
- new logics associated to "F/CTL LAWS REDUNDANCY LOST" ECAM warning,
- improvement of the logics associated to "USE MAN PITCH TRIM" warning (refer to TFU
27.95.00.045).
The Operational/Maintenance Consequences of this Service Bulletin are covered by the update of the
affected publications detailed in ’PLANNING INFORMATION’.
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 YES
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 LROPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 YES
NOTE
 (1)
: Service Bulletin must be accomplished.
MATERIAL PRICE INFORMATION
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Equipment BFEA01
 1
 See SB
 FCDC
Equipment BFEA02
 1
 See SB
 OBRM
EFFECTIVITY
This Service Bulletin is applicable to this (these) operator(s) :
01V 06Y 14S 15R 26L 31V 36L 39N 41N 65W 68M 74W 78U
83V 98W ABD AFR AIB ALD ARG AXY BEL BOE CAL D2F DGA
DLH EDW F2I GAF HFM HFY IRC IRM KAC KMF M3R MAU MDG
MRJ PAL PUE QQE ROI S3R SAA SAS SFB SLM SWR SYR TAP
THT THY U6A VCV
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A340
SERVICE BULLETIN
SUMMARY
CONCURRENT REQUIREMENTS
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment of the
following Service Bulletin(s):
Service Bulletin No. A340-27-4182
A340-27-4208
A340-27-4212
A340-31-4190
NOTE
: Service Bulletin No. A340-27-4182 (FLIGHT CONTROLS - FLIGHT CONTROL DATA
CONCENTRATOR (FCDC) - INSTALL NEW FCDC STD L22/M21/P12 ON LR A/C).
NOTE
: Service Bulletin No. A340-27-4208 (FLIGHT CONTROLS - FCPC - INSTALL FCPC L25
2K2 A340 A/C).
NOTE
: Service Bulletin No. A340-27-4212 (FLIGHT CONTROLS - FCPC REPLACE THE 2K0
AND 2K1 FCPC HARDWARE BY THE 2K2 FCPC HARDWARE).
NOTE
: Service Bulletin No. A340-31-4190 (FLIGHT WARNING COMPUTER (FWC) - INSTALL
L15 STD).
NOTE
: Accomplish either Service Bulletin No. A340-27-4208 or A340-27-4212 as per effectivity
specified in these Service Bulletins.
REFERENCES / REPERCUSSIONS
TFU
 27.95.00.045
OEB
 None
AOT
 None
SIL
 None
ISI
 27.90.00045
27.93.00007
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 OIT 999.0020/16
NATURE OF THE WORK
AIRCRAFT
 NO
EQUIPMENT
 YES
MANPOWER
Task 274211-831-801-001: OPTION 1 - Upgrade by Replacement of FCDCs on Aircraft
TOTAL MANHOURS
 2.50
ELAPSED TIME (HOURS)
 2.50
Task 274211-831-802-001: OPTION 2 - Upgrade by Replacement of FCDC OBRMs on Aircraft
TOTAL MANHOURS
 2.50
ELAPSED TIME (HOURS)
 2.50
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A340
SERVICE BULLETIN
SUMMARY
Task 274211-831-803-001: OPTION 3 - Upgrade by Reprogramming of FCDC OBRMs in
accordance with VSB on Bench
TOTAL MANHOURS
 2.50
ELAPSED TIME (HOURS)
 2.50
Additional manhours relat ed to Vendor SB; refer to:
Reprogram and re-identify the OBRMs in accordance with
VSB on Bench
THALES AVS FRANCE SAS
Service Bulletin No.
87292337-27-035
APPENDICES
Appendix 01 - Glossary
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A340
SERVICE BULLETIN
SUMMARY
**CONF ALL
A
800VU
FR20
FR1
Z120
A
MODIFICATION OF
FCDC−1 IN SHELF 841VU
MODIFICATION OF
FCDC−2 IN SHELF 842VU
F_SB_274211_5_SAAA_01_00
Figure A-FSAAA - Sheet 01
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 5
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A340
SERVICE BULLETIN
SUMMARY
This Page Intentionally Left Blank
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 6
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A340
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 27
TITLE: FLIGHT CONTROLS - FLIGHT CONTROL DATA CONCENTRATOR
(FCDC) - INTRODUCE FCDC STD L26 M25 P16 ON BASIC A/C
MODIFICATION No.: 204828S32944
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
NOTE
: This Service Bulletin is not applicable to aircraft on which MOD No.
49144S16279 (FLIGHT CONTROLS - ELECTRICAL FLIGHT CONTROL
SYSTEM (EFCS) - INSTALL RUDDER F LY-BY WIRE ON A330/A340) is
embodied.
NOTE
: This modification is applicable by Service Bulletin only.
(1) Models
340-211 340-212 340-213 340-311 340-312 340-313
(2) Effectivity by MSN
0002 0004 0009 0014 0020 0022 0026 0029 0031 0038 0041 0043-0044 0046-0047
0051 0056 0058 0061 0063 0074-0076 0078-0081 0084 0089-0091 0093-0094 0101
0104 0114-0115 0117 0123 0125-0126 0128 0134-0135 0139 0145-0146 0149
0151-0152 0156 0158-0159 0163-0164 0166-0168 0170 0174-0175 0178-0180
0185-0186 0190 0192-0194 0197 0199 0201-0202 0204 0207-0208 0210 0212-0215
0217 0221 0233 0236-0237 0242-0243 0245-0246 0252 0257 0260 0264 0268 0270
0274 0278 0280 0282 0292 0297 0302 0304 0307 0310 0318-0319 0321 0325 0327
0329 0331-0332 0335 0347 0352 0354-0355 0367 0373-0374 0377-0379 0381 0385
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A340
SERVICE BULLETIN
0387 0390 0395 0399 0402 0406 0411 0413 0415 0424 0430 0433-0435 0438
0446-0447 0450 0459 0467 0470 0474 0483 0528 0538 0541 0545-0546 0554 0556
0559 0561-0562
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
01V
 0146
06Y
 0139 0149
14S
 0058 0152 0402 0411 0415
15R
 0151
26L
 0125 0134 0145 0217 0221 0329
31V
 0093
36L
 0406
39N
 0168 0174
41N
 0009
65W
 0029 0208
68M
 0078 0377
74W
 0047 0051
78U
 0175 0179
83V
 0280
98W
 0014 0022
ABD
 0210
AFR
 0186 0207 0245 0246 0260
AIB
 0192 0243 0264
ALD
 0156 0159 0178
ARG
 0063 0074 0080 0123 0126 0170 0193
AXY
 0374
BEL
 0335 0354
BOE
 0554
CAL
 0433 0541
D2F
 0128
DGA
 0075 0081
DLH
 0135 0158 0213 0233 0252 0297 0304 0321 0325 0327 0347 0352
0379 0390 0434 0447
EDW
 0556 0559 0561 0562
F2I
 0038 0043 0084 0094 0114 0117 0214 0237 0302 0307 0310
GAF
 0274 0355
HFM
 0163 0166 0185 0236 0367 0483
HFY
 0190 0202
IRC
 0002
IRM
 0020 0056 0164 0282 0292
KAC
 0089 0090 0101 0104
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A340
SERVICE BULLETIN
OPERATOR
 MSN
KMF
 0278 0318 0387
M3R
 0061
MAU
 0076 0194 0268
MDG
 0319
MRJ
 0257
PAL
 0332 0474
PUE
 0212 0215 0399 0459
QQE
 0026 0528
ROI
 0199 0201
S3R
 0004 0204
SAA
 0197 0378
SAS
 0167 0413 0424 0430 0435 0450 0467 0470
SFB
 0046
SLM
 0242
SWR
 0538 0545 0546
SYR
 0381
TAP
 0041 0044 0079 0091
THT
 0385 0438 0446
THY
 0115 0180 0270 0331
U6A
 0373 0395
VCV
 0031
(4) Configuration by MSN
MSN
 CONFIGURATION
0002 0004 0009 0014 0020 0022 0026 0029 0031 0038 0041
0043 0044 0046 0047 0051 0056 0058 0061 0063 0074 0075
0076 0078 0079 0080 0081 0084 0089 0090 0091 0093 0094
0101 0104 0114 0115 0117 0123 0125 0126 0128 0134 0135
0139 0145 0146 0149 0151 0152 0156 0158 0159 0163 0164
0166 0167 0168 0170 0174 0175 0178 0179 0180 0185 0186
0190 0192 0193 0194 0197 0199 0201 0202 0204 0207 0208
0210 0212 0213 0214 0215 0217 0221 0233 0236 0237 0242
0243 0245 0246 0252 0257 0260 0264 0268 0270 0274 0278
0280 0282 0292 0297 0302 0304 0307 0310 0318 0319 0321
0325 0327 0329 0331 0332 0335 0347 0352 0354 0355 0367
0373 0374 0377 0378 0379 0381 0385 0387 0390 0395 0399
0402 0406 0411 0413 0415 0424 0430 0433 0434 0435 0438
0446 0447 0450 0459 0467 0470 0474 0483 0528 0538 0541
0545 0546 0554 0556 0559 0561 0562
001
(5) Configuration definition
**CONF 001
Config. 001 is valid for all the aircraft given in the effectivity of this Service Bulletin as a
standard configuration.
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A340
SERVICE BULLETIN
(6) Material Effectivity
MATERIAL
 QTY PER A/C
 SEE NOTES
Equipment BFEA01
 1
 (1)
Equipment BFEA02
 1
 (2)
Reidentified part set REIDA01
 1
 (3)
Reidentified part set REIDA02
 1
 (4)
NOTE
 (1)
: Equipment BFEA01 is applicable to TASK 274211-831-801 001 OPTION
1 - Upgrade by Replacement of FCDCs on Aircraft .
NOTE
 (2)
: Equipment BFEA02 is applicable to TASK 274211-831-802 001 OPTION
2 - Upgrade by Replacement of FCDC OBRMs on Aircraft .
NOTE
 (3)
: Reidentified part set REIDA01 is applicable to TASK 274211-831-803
001 OPTION 3 - Upgrade by Reprogramming of FCDC OBRMs in
accordance with VSB on Bench .
NOTE
 (4)
: Reidentified part set REIDA02 is applicable to TASK 274211-831-802
001 OPTION 2 - Upgrade by Replacement of FCDC OBRMs on Aircraft .
B. CONCURRENT REQUIREMENTS
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment of
the following Service Bulletin(s):
Service Bulletin No. A340-27-4182
A340-27-4208
A340-27-4212
A340-31-4190
NOTE
: Service Bulletin No. A340-27-4182 (FLIGHT CONTROLS - FLIGHT
CONTROL DATA CONCENTRATOR (FCDC) - INSTALL NEW FCDC STD
L22/M21/P12 ON LR A/C).
NOTE
: Service Bulletin No. A340-27-4208 (FLIGHT CONTROLS - FCPC - INSTALL
FCPC L25 2K2 A340 A/C).
NOTE
: Service Bulletin No. A340-27-4212 (FLIGHT CONTROLS - FCPC REPLACE
THE 2K0 AND 2K1 FCPC HARDWARE BY THE 2K2 FCPC HARDWARE).
NOTE
: Service Bulletin No. A340-31-4190 (FLIGHT WARNING COMPUTER (FWC) -
INSTALL L15 STD).
NOTE
: Accomplish either Service Bulletin No. A340-27-4208 or A340-27-4212 as per
effectivity specified in these Service Bulletins.
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A340
SERVICE BULLETIN
C. REASON
(1) History
This Service Bulletin consists in introducing new Flight Control Data Concentrator
(FCDC) software Standard (STD) L26/M25/P16 which brings several improvements.
(2) Objective/Action
This Service Bulletin is published to enable operators of A340 with mechanical rudder
control (MOD No. 49144S16279 not embodied) to apply the THALES AVIONICS Service
Bulletin No. 87292337-27-035 which modifies the FCDCs.
In addition, considering pre-requistites of this Service Bulletin, its application entails:
- prior replacement of Flight Control Primary Computer (FCPC) 2K0 and 2K1
hardware by FCPC L25 standard (2K2 hardware) (refer to OIT 999.0020/16 and ISI
27.90.00045),
- prior upgrade of FWC up to L15 software standard (refer to ISI 27.90.00045),
- pin-programing and prior upgrade of SDAC up to C10 minimun software standard
(refer to ISI 27.90.00045),
- change in FCPC interchangeability and mixability (refer to ISI 27.93.00007).
The new software standard can be embodied:
- Either by replacement or reprogramming of the On Board Replaceable Modules
(OBRMs)
- Or by replacement of the two FCDC units (1CE1 and 1CE2).
(3) Advantages
Accomplishment of this Service Bulletin brings the following advantages:
- FCDC capability for Stop Rudder Input Warning (SRIW) function which is expected
to be mandated on A340 with mechanical rudder control (refer to ISI 27.90.00.045
for further information of SRIW function and associated pre-requistes).
- introduction of new maintenance messages related to force fighting monitoring (refer
to TFU 27.95.00.045)
- new logics associated to "F/CTL LAWS REDUNDANCY LOST" ECAM warning,
- improvement of the logics associated to "USE MAN PITCH TRIM" warning (refer to
TFU 27.95.00.045).
(4) Operational/Maintenance Consequences
The Operational/Maintenance Consequences of this Service Bulletin are covered by the
update of the affected publications detailed in ’PLANNING INFORMATION’.
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 5
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A340
SERVICE BULLETIN
D. DESCRIPTION
NOTE
: To accomplish this Service Bulletin, you have three options.
To accomplish this Service Bulletin it is necessary to :
Task 274211-831-801-001: OPTION 1 - Upgrade by Replacement of FCDCs on Aircraft
(1) Replace the FCDCs (1CE1 and 1CE2) in the Electronics Rack 800VU
Task 274211-831-802-001: OPTION 2 - Upgrade by Replacement of FCDC OBRMs on
Aircraft
(1) Replace the OBRMs
(2) Re-identify the two FCDCs (1CE1 and 1CE2)
Task 274211-831-803-001: OPTION 3 - Upgrade by Reprogramming of FCDC OBRMs in
accordance with VSB on Bench
(1) Remove the OBRMs
(2) Reprogram and re-identify the OBRMs in accordance with VSB on Bench
(3) Install the OBRMs
(4) Re-identify the two FCDCs (1CE1 and 1CE2)
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory. Accomplishment of this Service
Bulletin must be done within 4 years after issuance of this Service Bulletin. It is expected
that an Airworthiness Directive (AD) published by the European Aviation Safety Agency
(EASA) will be issued to confirm this classification. It is anticipated that the AD will
confirm the thresholds given but reference should be made to the AD for confirmation of
the mandated accomplishment timescale.
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA.21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 6
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A340
SERVICE BULLETIN
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
Task 274211-831-801-001: OPTION 1 - Upgrade by Replacement of FCDCs on Aircraft
Get Access
 0.50
On Aircraft
Replace the FCDCs (1CE1 and 1CE2) in the
Electronics Rack 800VU
1.00
Tests
 0.50
Close-Up
 0.50
TOTAL MANHOURS
 2.50
ELAPSED TIME (HOURS)
 2.50
Task 274211-831-802-001: OPTION 2 - Upgrade by Replacement of FCDC OBRMs on Aircraft
Get Access
 0.50
On Aircraft
Replace the OBRMs
 0.50
Re-identify the two FCDCs (1CE1 and 1CE2)
 0.50
Tests
 0.50
Close-Up
 0.50
TOTAL MANHOURS
 2.50
ELAPSED TIME (HOURS)
 2.50
Task 274211-831-803-001: OPTION 3 - Upgrade by Reprogramming of FCDC OBRMs in
accordance with VSB on Bench
Get Access
 0.50
On Aircraft
Remove the OBRMs
 0.25
Install the OBRMs
 0.25
Re-identify the two FCDCs (1CE1 and 1CE2)
 0.50
Tests
 0.50
Close-Up
 0.50
TOTAL MANHOURS
 2.50
ELAPSED TIME (HOURS)
 2.50
Additional manhours relat ed to Vendor SB; refer to:
Reprogram and re-identify the OBRMs in accordance
with VSB on Bench
THALES AVS FRANCE SAS
Service Bulletin No.
87292337-27-035
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 7
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A340
SERVICE BULLETIN
H. WEIGHT AND BALANCE
Not Changed
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
Aircraft Maintenance Manual (AMM)
 06-20-00 06-31-53 12-34-24
20-15-00 20-16-00 24-00-00
27-95-34 27-96-00 45-10-00
52-41-00
ATA Common Support Data Dictionary (CSDD),
Chapter 2
Elec. Std. Practices Manual (ESPM)
 20-55-00
Service Bulletin (SB)
 A340-27-4182
A340-27-4208
A340-27-4212
A340-31-4190
Vendor Service Bulletin (VSB)
 THALES AVS FRANCE SAS
Service Bulletin No.
87292337-27-035
K. PUBLICATION AFFECTED
Flight Crew Operating Manual (FCOM)
Flight Manual (FM)
Illustrated Parts Catalog (IPC)
 27-93-34 27-95-34
Trouble Shooting Manual (TSM)
 27-10-00 27-93-00 27-94-00
27-95-00
This Service Bulletin has an impact on flight operations documentation. Refer to ISI
00.00.00135 ’Flight Operations Products’ for further information on the update of affected
Flight Operations Products.
Technical queries should be addressed through TechRequest on AirbusWorld using
’Technical Data/Support to report Service Bulletins’ form.
L. INTERCHANGEABILITY/MIXABILITY
The interchangeability/mixability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
DESCRIPTION
 OLD PART N˚
 NEW PART N˚
 INT
 MIXABILITY
 SEE
NOTES
FCDC
 87292337V04L14
 87292337V04L15
 03
 NO
 (1)
OBRMs
 87093732V01L14
 87093732V01L15
 03
 NO
 (1)
NOTE
: For definitions of interchangeability codes in column INT., refer to ATA
Common Support Data Dictionary (CSDD), Chapter 2.
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 8
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A340
SERVICE BULLETIN
NOTE
: Only the mixability configuration(s) and condition(s) stated in this Service
Bulletin are approved.
NOTE
 (1)
: When the old PN is removed, it may be replaced:
- with the old PN,
- with the new PN only if the complete set of old PN is replaced with a set
of new PN.
When the new PN is removed, it must be replaced with the new PN.
M. SPARES
FCDC 87292337V04L14
The parts listed here must not be installed anymore on aircraft which have accomplished this
Service Bulletin or which have the equivalent production modification embodied.
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 9
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A340
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 10
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A340
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
Vendor parts are to be procured from:
Equipment BFEA01
Equipment BFEA02
THALES AVS FRANCE SAS
105, avenue du General Eisenhower
BP 63647
31036 TOULOUSE CEDEX 1
FRANCE
T e l :+ 3 356 11 97 69 5
F a x :+ 3 356 11 96 82 0
E-mail: retrofit@fr.thalesgroup.com
(2) Price and Availability
Equipment BFEA01
For option 1: Procurement terms for the equipment must be negotiated with the
equipment supplier.
Equipment BFEA02
For option 2: Procurement terms for the equipment must be negotiated with the
equipment supplier.
Reidentified part set REIDA01
For option 3: Refer to the THALES AVS FRANCE SAS Service Bulletin No.
87292337-27-035 for the equipment modification sales terms.
B. INDUSTRY SUPPORT INFORMATION
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.
For option 1: Industry support terms for the equipment must be negotiated with the equipment
supplier.
For option 2: Industry support terms for the equipment must be negotiated with the equipment
supplier.
For option 3: Modification of removed equipment should be negotiated directly with THALES
AVS FRANCE SAS as per instructions given in Service Bulletin No. 87292337-27-035.
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 11
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A340
SERVICE BULLETIN
Refer to the THALES AVS FRANCE SAS Service Bulletin No. 87292337-27-035 for the
industry support terms of the Vendor Service Bulletin parts and labor.
C. LIST OF COMPONENTS
No Kit
D. LIST OF MATERIALS - OPERATOR SUPPLIED
(1) Consumable Materials
None
(2) Components
None
(3) Equipment
Equipment BFEA01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
87292337V04L15
 2
 FCDC
 87292337V04L14
 03
NOTE
: For definitions of interchangeability codes in column INT., refer to ATA
Common Support Data Dictionary (CSDD), Chapter 2.
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
Equipment BFEA02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
87093732V01L15
 2
 OBRM
 87093732V01L14
 03
NOTE
: For definitions of interchangeability codes in column INT., refer to ATA
Common Support Data Dictionary (CSDD), Chapter 2.
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE
: The FCPC reidentification labels are supplied in equipment BFEA02.
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
Reidentified part set REIDA01
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
87093732V01L15
 OBRM
 87093732V01L14
87292337V04L15
 FCDC
 87292337V04L14
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 12
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A340
SERVICE BULLETIN
NOTE
: Parts are re-identified in accordance with the THALES AVS FRANCE SAS
Service Bulletin No. 87292337-27-035.
Reidentified part set REIDA02
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
87292337V04L15
 FCDC
 87292337V04L14
F. TOOLING
(1) Tooling - Price and Availability
None
(2) Tools
To accomplish TASK 274211-831-803 001 OPTION 3 - Upgrade by Reprogramming of
FCDC OBRMs in accordance with VSB on Bench , it is necessary to use the tools listed
in THALES AVS FRANCE SAS Service Bulletin No. 87292337-27-035.
(3) Special Tools
None
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 13
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A340
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 14
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A340
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 274211-831-801-001 - OPTION 1 - Upgrade b y Replacement of FCDCs on Aircraft
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including RC paragraph contained herein,
contact AIRBUS for further instructions and approval.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an AD. The paragraphs 3.C. and 3.D. in these accomplishment instructions are
RC and must be done to comply with the AD. To allow more flexibility, the rule
"refer to" and "in accordance with" will apply to these paragraphs 3.C. and 3.D.
Other paragraphs are recommended and may be deviated from, done as part of
other actions or done with accepted methods different from those given in the
Service Bulletin, as long as the RC paragraphs can be done and the aircraft can
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 15
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A340
SERVICE BULLETIN
be put back into a serviceable condition.
NOTE
: Discarded parts must be managed at the operator’s discretion.
Task Associated Data
Zone
120
Modified FIN
1CE1 1CE2
Access
Door
 811
Manpower
TOTAL MANHOURS
 2.50
ELAPSED TIME (HOURS)
 2.50
A. GENERAL
(1) Subtask 274211-910-001-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
06-31-53, Page Block 001
(a) For the FR identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(2) Subtask 274211-839-001-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
B. PREPARATION
(1) Subtask 274211-941-001-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-860-802
Task 27-95-34-000-801
Task 45-10-00-860-814
NOTE
: For the basic Aircraft configuration, refer to AMM Chapter ’Introduction -
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 16
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A340
SERVICE BULLETIN
Aircraft status for maintenance’ in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Check appropriate FCPC pre-required configuration:
- Make sure that these circuit breakers are closed:
PANEL
 DESIGNATION
 FIN
 LOCATION
 SEE
NOTES
742VU
 FCPC1 NORM
 7CE1
 C66
742VU
 FCPC1 STBY
 11CE
 K67
721VU
 FCPC2 STBY
 28CE
 X13
722VU
 FCPC2 NORM
 7CE2
 V41
721VU
 FCPC3 STBY COM
 7CE6
 R20
 (1)
721VU
 FCPC3 STBY MON
 7CE5
 R19
 (1)
722VU
 FCPC3
 7CE3
 V42
 (1)
722VU
 FCPC3
 7CE4
 V38
 (1)
NOTE
 (1)
: For aircraft part of Service Bulletin No. A340-27-4158 effectivity, the
location of CBs depends on associated aircraft configuration.
- Do the procedure to get access to the SYSTEM REPORT/TEST F/CTL: EFCS
page, refer to AMM Task 45-10-00-860-814.
NOTE
: The actions and results of this procedure occur the MCDU you use.
NOTE
: This test is for system 1. For other system(s), use the indications
between the parentheses.
NOTE
: You can launch this test when the EIVMU is deactivated.
ACTION
 RESULT
1. Push the line key adjacent to the EFCS1(2)
indication.
- The EFCS1(2) menu page comes into view.
2. Push the line key adjacent to the LRU IDENT
indication.
- The LRU IDENTIFICATION page comes into
view.
- Make sure that the PN shown on the LRU IDENTIFICATION page is
LA2K2B1002C0000 for the three FCPCs 2CE1, 2CE2 and 2CE3.
NOTE
: If the PN of FCPC is not the same, you must remove the concerned
FCPC and return it to the shop (refer to interchangeability
conditions of pre-requisite Service Bulletin No. A340-27-4208 or
Service Bulletin No. A340-27-4212).
(c) Do the job set-up procedure as specified in the removal of the FCDC (FINs 1CE1
and 1CE2), refer to AMM Task 27-95-34-000-801.
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 17
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A340
SERVICE BULLETIN
C. PROCEDURE
(1) Subtask 274211-960-001-001 - Replace the FCDCs (1CE1 and 1CE2) in the
Electronics Rack 800VU
Work Zones and Access Panels
Zone
 Access/Work location
120
 Access
 Door 811
Work location
 Electrical panel 800VU
Manpower Resources
Manhours
 1.00
Minimum number of person
 1
Subtask elapsed time
 1.00
Skills
 NON SPECIFIC
Material necessary to do the job
Equipment BFEA01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
87292337V04L15
 2
 FCDC
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
References
Aircraft Maintenance Manual (AMM)
 Task 27-95-34-000-801
Task 27-95-34-400-801
(a) Remove the FCDC (FINs 1CE1 and 1CE2), refer to AMM Task 27-95-34-000-801:
FIN 1CE1
1 FCDC 87292337V04L14 Discard
and
FIN 1CE2
1 FCDC 87292337V04L14 Discard
(b) Install the FCDC (FINs 1CE1 and 1CE2), refer to AMM Task 27-95-34-400-801:
FIN 1CE1
1 FCDC 87292337V04L15
and
FIN 1CE2
1 FCDC 87292337V04L15
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 18
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A340
SERVICE BULLETIN
D. TEST
(1) Subtask 274211-700-001-001 - Test
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-95-34-400-801
(a) Job Set-up:
1
 Remove the safety clips and tags and close the circuit breakers as specified
after the installation of the FCDC (FINs 1CE1 and 1CE2), refer to AMM Task
27-95-34-400-801.
(b) Procedure:
1
 Do the test procedure as specified after the installation of the FCDC (FINs
1CE1 and 1CE2), refer to AMM Task 27-95-34-400-801.
E. CLOSE-UP
(1) Subtask 274211-942-001-001 - Close-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-95-34-400-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the close-up procedure as specified in the installation of the FCDC (FINs 1CE1
and 1CE2), refer to AMM Task 27-95-34-400-801.
(c) Put the aircraft back to its initial configuration.
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 19
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A340
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 20
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A340
SERVICE BULLETIN
Task 274211-831-802-001 - OPTION 2 - Upgrade by Replacement of FCDC OBRMs on
Aircraft
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
CAUTION
: REFER TO AMM 20-15-00, PAGE BLOCK 201 FOR ELECTROSTATIC
DISCHARGE PRECAUTIONS.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including RC paragraph contained herein,
contact AIRBUS for further instructions and approval.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an AD. The paragraphs 3.C. and 3.D. in these accomplishment instructions are
RC and must be done to comply with the AD. To allow more flexibility, the rule
"refer to" and "in accordance with" will apply to these paragraphs 3.C. and 3.D.
Other paragraphs are recommended and may be deviated from, done as part of
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 21
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A340
SERVICE BULLETIN
other actions or done with accepted methods different from those given in the
Service Bulletin, as long as the RC paragraphs can be done and the aircraft can
be put back into a serviceable condition.
NOTE
: Discarded parts must be managed at the operator’s discretion.
Task Associated Data
Zone
120
Modified FIN
1CE1 1CE2
Access
Door
 811
Manpower
TOTAL MANHOURS
 2.50
ELAPSED TIME (HOURS)
 2.50
A. GENERAL
(1) Subtask 274211-910-002-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
06-31-53, Page Block 001
Task 20-16-00-912-801
24-00-00, Page Block 001
(a) For the FR identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the circuit breaker location, refer to AMM 24-00-00, Page Block 001.
(d) For circuit breaker safety practices, refer to AMM Task 20-16-00-912-801.
(2) Subtask 274211-839-002-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 22
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29

@A340
SERVICE BULLETIN
B. PREPARATION
(1) Subtask 274211-941-002-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-860-802
Task 27-95-34-000-801
Task 45-10-00-860-814
Task 52-41-00-010-801
NOTE
: For the basic Aircraft configuration, refer to AMM Chapter ’Introduction -
Aircraft status for maintenance’ in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Check appropriate FCPC pre-required configuration:
- Make sure that these circuit breakers are closed:
PANEL
 DESIGNATION
 FIN
 LOCATION
 SEE
NOTES
742VU
 FCPC1 NORM
 7CE1
 C66
742VU
 FCPC1 STBY
 11CE
 K67
721VU
 FCPC2 STBY
 28CE
 X13
722VU
 FCPC2 NORM
 7CE2
 V41
721VU
 FCPC3 STBY COM
 7CE6
 R20
 (1)
721VU
 FCPC3 STBY MON
 7CE5
 R19
 (1)
722VU
 FCPC3
 7CE3
 V42
 (1)
722VU
 FCPC3
 7CE4
 V38
 (1)
NOTE
 (1)
: For aircraft part of Service Bulletin No. A340-27-4158 effectivity, the
location of CBs depends on associated aircraft configuration.
- Do the procedure to get access to the SYSTEM REPORT/TEST F/CTL: EFCS
page, refer to AMM Task 45-10-00-860-814.
NOTE
: The actions and results of this procedure occur the MCDU you use.
NOTE
: This test is for system 1. For other system(s), use the indications
between the parentheses.
NOTE
: You can launch this test when the EIVMU is deactivated.
ACTION
 RESULT
1. Push the line key adjacent to the EFCS1(2)
indication.
- The EFCS1(2) menu page comes into view.
2. Push the line key adjacent to the LRU IDENT
indication.
- The LRU IDENTIFICATION page comes into
view.
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 23
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 30

@A340
SERVICE BULLETIN
- Make sure that the PN shown on the LRU IDENTIFICATION page is
LA2K2B1002C0000 for the three FCPCs 2CE1, 2CE2 and 2CE3.
NOTE
: If the PN of FCPC is not the same, you must remove the concerned
FCPC and return it to the shop (refer to interchangeability
conditions of pre-requisite Service Bulletin No. A340-27-4208 or
Service Bulletin No. A340-27-4212).
(c) Open the avionics-compartment access door 811, refer to AMM Task
52-41-00-010-801.
(d) Do the job set-up procedure as specified in the removal of the FCDC (FINs 1CE1
and 1CE2), refer to AMM Task 27-95-34-000-801 without the circuit breakers
opening part.
NOTE
: The circuit breakers will be managed in another subtask to allow the
BITE test of the Electrical Flight Control System (EFCS).
C. PROCEDURE
(1) Subtask 274211-960-002-001 - Replace the OBRMs
Work Zones and Access Panels
Zone
 Access/Work location
120
 Access
 Door 811
Work location
 Electrical panel 800VU
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 NON SPECIFIC
Material necessary to do the job
Equipment BFEA02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
87093732V01L15
 2
 OBRM
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE
: The FCPC reidentification labels are supplied in equipment BFEA02.
References
Aircraft Maintenance Manual (AMM)
 Task 27-96-00-740-807
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 24
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 31

@A340
SERVICE BULLETIN
(a) Before replacement of the OBRMs:
1
 After power-up, make sure that on the EWD, there is no ECAM warning
messages related to the FCDC (FINs 1CE1 and 1CE2).
2
 Make sure that these circuit breakers are closed:
PANEL
 DESIGNATION
 FIN
 LOCATION
 SEE
NOTES
742VU
 FCDC 1
 6CE1
 L76
722VU
 FCDC 2
 6CE2
 T40
721VU
 PRINTER
 1TP
 D02
3
 Do the BITE test of the EFCS (LRU IDENT), refer to AMM Task
27-96-00-740-807 and make sure that the old PN of the two FCDCs (FINs
1CE1 and 1CE2) is 87292337V04L14.
NOTE
: Print the LRU IDENTIFICATION page (if the printer is not
available, a visual check is acceptable).
4
 Open, safety/lock and tag this (these) circuit breaker(s):
PANEL
 DESIGNATION
 FIN
 LOCATION
 SEE
NOTES
742VU
 FCDC 1
 6CE1
 L76
722VU
 FCDC 2
 6CE2
 T40
(b) Replace the OBRMs on FCDC (FINs 1CE1 and 1CE2).
1
 Remove OBRMs:
2 OBRMs 87093732V01L14 Discard
NOTE
: Some OBRMs are located behind a flap on the equipment,
open it if necessary.
2
 Install OBRMs:
2 OBRMs 87093732V01L15
NOTE
: Labels are attached on the OBRMs
(2) Subtask 274211-831-002-001 - Re-identify the two FCDCs (1CE1 and 1CE2)
Work Zones and Access Panels
Zone
 Access/Work location
120
 Access
 Door 811
Work location
 Electrical panel 800VU
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 25
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 32

@A340
SERVICE BULLETIN
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 NON SPECIFIC
Material necessary to do the job
Reidentified part set REIDA02
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
87292337V04L15
 FCDC
 87292337V04L14
(a) Re-identify the two FCDCs (1CE1 and 1CE2) with labels supplied in Equipment
BFEA02.
FIN 1CE1
1 FCDC 87292337V04L14
becomes
FIN 1CE1
1 FCDC 87292337V04L15
and
FIN 1CE2
1 FCDC 87292337V04L14
becomes
FIN 1CE2
1 FCDC 87292337V04L15
NOTE
: If necessary, the responsible Quality Inspector can put his own
sticker and his own control seal on the front face to confirm the
replacement of the OBRMs.
D. TEST
(1) Subtask 274211-700-002-001 - Test
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-96-00-740-801
Task 27-96-00-740-807
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 26
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 33

@A340
SERVICE BULLETIN
(a) Job Set-up:
1
 Remove the safety clip(s) and/or tag(s) and close/unlock this (these) circuit
breaker(s):
PANEL
 DESIGNATION
 FIN
 LOCATION
 SEE
NOTES
742VU
 FCDC 1
 6CE1
 L76
722VU
 FCDC 2
 6CE2
 T40
(b) After replacement of the OBRMs:
1
 After power-up, make sure that on the EWD, there is no ECAM warning
messages related to the FCDC (FINs 1CE1 and 1CE2).
2
 Do the BITE test of the EFCS (Ground Scanning), refer to AMM Task
27-96-00-740-801 to make sure that there is no failure on the FCDC.
NOTE
: If the test shows a class 1 fault message related to a computer
modified for the aircraft by the replacement of the OBRM(s) in
the shop, you must:
- Remove the computer
- Return it to the shop.
3
 Do the BITE test of the EFCS (LRU IDENT), refer to AMM Task
27-96-00-740-807 and make sure that the new PN of the two FCDCs (FINs
1CE1 and 1CE2) is 87292337V04L15.
NOTE
: Print the LRU IDENTIFICATION page (if the printer is not
available, a visual check is acceptable).
E. CLOSE-UP
(1) Subtask 274211-942-002-001 - Close-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-95-34-400-801
Task 52-41-00-410-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the close-up procedure as specified in the installation of the FCDC (FINs 1CE1
and 1CE2), refer to AMM Task 27-95-34-400-801.
(c) Close the avionics-compartment access door 811, refer to AMM Task
52-41-00-410-801.
(d) Put the aircraft back to its initial configuration.
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 27
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 34

@A340
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 28
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 35

@A340
SERVICE BULLETIN
Task 274211-831-803-001 - OPTION 3 - Upgrade by Reprogramming of FCDC OBRMs in
accordance with VSB on Bench
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
CAUTION
: REFER TO AMM 20-15-00, PAGE BLOCK 201 FOR ELECTROSTATIC
DISCHARGE PRECAUTIONS.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including RC paragraph contained herein,
contact AIRBUS for further instructions and approval.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an AD. The paragraphs 3.C. and 3.D. in these accomplishment instructions are
RC and must be done to comply with the AD. To allow more flexibility, the rule
"refer to" and "in accordance with" will apply to these paragraphs 3.C. and 3.D.
Other paragraphs are recommended and may be deviated from, done as part of
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 29
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 36

@A340
SERVICE BULLETIN
other actions or done with accepted methods different from those given in the
Service Bulletin, as long as the RC paragraphs can be done and the aircraft can
be put back into a serviceable condition.
Task Associated Data
Zone
120
Modified FIN
1CE1 1CE2
Access
Door
 811
Manpower
TOTAL MANHOURS
 2.50
ELAPSED TIME (HOURS)
 2.50
Additional manhours related to Vendor SB; refer to:
THALES AVS FRANCE SAS Service Bulletin No. 87292337-27-035
A. GENERAL
(1) Subtask 274211-910-003-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
06-31-53, Page Block 001
Task 20-16-00-912-801
24-00-00, Page Block 001
(a) For the FR identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the circuit breaker location, refer to AMM 24-00-00, Page Block 001.
(d) For circuit breaker safety practices, refer to AMM Task 20-16-00-912-801.
(2) Subtask 274211-839-003-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 30
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 37

@A340
SERVICE BULLETIN
B. PREPARATION
(1) Subtask 274211-941-003-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-860-802
Task 27-95-34-000-801
Task 45-10-00-860-814
Task 52-41-00-010-801
NOTE
: For the basic Aircraft configuration, refer to AMM Chapter ’Introduction -
Aircraft status for maintenance’ in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Check appropriate FCPC pre-required configuration:
- Make sure that these circuit breakers are closed:
PANEL
 DESIGNATION
 FIN
 LOCATION
 SEE
NOTES
742VU
 FCPC1 NORM
 7CE1
 C66
742VU
 FCPC1 STBY
 11CE
 K67
721VU
 FCPC2 STBY
 28CE
 X13
722VU
 FCPC2 NORM
 7CE2
 V41
721VU
 FCPC3 STBY COM
 7CE6
 R20
 (1)
721VU
 FCPC3 STBY MON
 7CE5
 R19
 (1)
722VU
 FCPC3
 7CE3
 V42
 (1)
722VU
 FCPC3
 7CE4
 V38
 (1)
NOTE
 (1)
: For aircraft part of Service Bulletin No. A340-27-4158 effectivity, the
location of CBs depends on associated aircraft configuration.
- Do the procedure to get access to the SYSTEM REPORT/TEST F/CTL: EFCS
page, refer to AMM Task 45-10-00-860-814.
NOTE
: The actions and results of this procedure occur the MCDU you use.
NOTE
: This test is for system 1. For other system(s), use the indications
between the parentheses.
NOTE
: You can launch this test when the EIVMU is deactivated.
ACTION
 RESULT
1. Push the line key adjacent to the EFCS1(2)
indication.
- The EFCS1(2) menu page comes into view.
2. Push the line key adjacent to the LRU IDENT
indication.
- The LRU IDENTIFICATION page comes into
view.
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 31
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 38

@A340
SERVICE BULLETIN
- Make sure that the PN shown on the LRU IDENTIFICATION page is
LA2K2B1002C0000 for the three FCPCs 2CE1, 2CE2 and 2CE3.
NOTE
: If the PN of FCPC is not the same, you must remove the concerned
FCPC and return it to the shop (refer to interchangeability
conditions of pre-requisite Service Bulletin No. A340-27-4208 or
Service Bulletin No. A340-27-4212).
(c) Open the avionics-compartment access door 811, refer to AMM Task
52-41-00-010-801.
(d) Do the job set-up procedure as specified in the removal of the FCDC (FINs 1CE1
and 1CE2), refer to AMM Task 27-95-34-000-801 without the circuit breakers
opening part.
NOTE
: The circuit breakers will be managed in another subtask to allow the
BITE test of the Electrical Flight Control System (EFCS).
C. PROCEDURE
(1) Subtask 274211-020-001-001 - Remove the OBRMs
Work Zones and Access Panels
Zone
 Access/Work location
120
 Access
 Door 811
Work location
 Electrical panel 800VU
Manpower Resources
Manhours
 0.25
Minimum number of person
 1
Subtask elapsed time
 0.25
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-96-00-740-807
(a) Before reprogramming the OBRMs:
1
 After power-up, make sure that on the EWD, there is no ECAM warning
messages related to the FCDC (FINs 1CE1 and 1CE2).
2
 Make sure that these circuit breakers are closed:
PANEL
 DESIGNATION
 FIN
 LOCATION
 SEE
NOTES
742VU
 FCDC 1
 6CE1
 L76
722VU
 FCDC 2
 6CE2
 T40
721VU
 PRINTER
 1TP
 D02
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 32
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 39

@A340
SERVICE BULLETIN
3
 Do the BITE test of the EFCS (LRU IDENT), refer to AMM Task
27-96-00-740-807 and make sure that the old PN of the two FCDCs (FINs
1CE1 and 1CE2) is 87292337V04L14.
NOTE
: Print the LRU IDENTIFICATION page (if the printer is not
available, a visual check is acceptable).
4
 Open, safety/lock and tag this (these) circuit breaker(s):
PANEL
 DESIGNATION
 FIN
 LOCATION
 SEE
NOTES
742VU
 FCDC 1
 6CE1
 L76
722VU
 FCDC 2
 6CE2
 T40
5
 Remove the OBRMs from the FCDCs (FINs 1CE1 and 1CE2):
2 OBRMs 87093732V01L14 Retain
NOTE
: Retained for modification.
(2) Subtask 274211-470-001-001 - Reprogram and re-identify the OBRMs in
accordance with VSB on Bench
Material necessary to do the job
Reidentified part set REIDA01
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
87093732V01L15
 OBRM
 87093732V01L14
NOTE
: Parts are re-identified in accordance with the THALES AVS FRANCE
SAS Service Bulletin No. 87292337-27-035.
References
Vendor Service Bulletin (VSB)
 THALES AVS FRANCE SAS
87292337-27-035
(a) Reprogram and re-identify the OBRMs of FCDCs (FINs 1CE1 and 1CE2) as
described in THALES AVS FRANCE SAS Service Bulletin No. 87292337-27-035.
(b) After modification:
2 OBRMs 87093732V01L14
becomes
2 OBRMs 87093732V01L15
(3) Subtask 274211-420-001-001 - Install the OBRMs
Work Zones and Access Panels
Zone
 Access/Work location
120
 Access
 Door 811
Work location
 Electrical panel 800VU
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 33
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 40

@A340
SERVICE BULLETIN
Manpower Resources
Manhours
 0.25
Minimum number of person
 1
Subtask elapsed time
 0.25
Skills
 NON SPECIFIC
(a) Install the modified OBRMs to the FCDC (FINs 1CE1 and 1CE2).
(4) Subtask 274211-831-003-001 - Re-identify the two FCDCs (1CE1 and 1CE2)
Work Zones and Access Panels
Zone
 Access/Work location
120
 Access
 Door 811
Work location
 Electrical panel 800VU
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 NON SPECIFIC
Material necessary to do the job
Reidentified part set REIDA01
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
87292337V04L15
 FCDC
 87292337V04L14
NOTE
: Parts are re-identified in accordance with the THALES AVS FRANCE
SAS Service Bulletin No. 87292337-27-035.
(a) Re-identify the two FCDCs (FINs 1CE1 and 1CE2).
FIN 1CE1
1 FCDC 87292337V04L14
becomes
FIN 1CE1
1 FCDC 87292337V04L15
and
FIN 1CE2
1 FCDC 87292337V04L14
becomes
FIN 1CE2
1 FCDC 87292337V04L15
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 34
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 41

@A340
SERVICE BULLETIN
NOTE
: If necessary, the responsible Quality Inspector can put his own
sticker and his own control seal on the front face to confirm the
replacement of the OBRMs.
D. TEST
(1) Subtask 274211-700-003-001 - Test
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-96-00-740-801
Task 27-96-00-740-807
(a) Job Set-up:
1
 Remove the safety clip(s) and/or tag(s) and close/unlock this (these) circuit
breaker(s):
PANEL
 DESIGNATION
 FIN
 LOCATION
 SEE
NOTES
742VU
 FCDC 1
 6CE1
 L76
722VU
 FCDC 2
 6CE2
 T40
(b) After replacement of the OBRMs:
1
 After power-up, make sure that on the EWD, there is no ECAM warning
messages related to the FCDC (FINs 1CE1 and 1CE2).
2
 Do the BITE test of the EFCS (Ground Scanning), refer to AMM Task
27-96-00-740-801 to make sure that there is no failure on the FCDC.
NOTE
: If the test shows a class 1 fault message related to a computer
modified for the aircraft by the replacement of the OBRM(s) in
the shop, you must:
- Remove the computer
- Return it to the shop.
3
 Do the BITE test of the EFCS (LRU IDENT), refer to AMM Task
27-96-00-740-807 and make sure that the new PN of the two FCDCs (FINs
1CE1 and 1CE2) is 87292337V04L15.
NOTE
: Print the LRU IDENTIFICATION page (if the printer is not
available, a visual check is acceptable).
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 35
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 42

@A340
SERVICE BULLETIN
E. CLOSE-UP
(1) Subtask 274211-942-003-001 - Close-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-95-34-400-801
Task 52-41-00-410-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the close-up procedure as specified in the installation of the FCDC (FINs 1CE1
and 1CE2), refer to AMM Task 27-95-34-400-801.
(c) Close the avionics-compartment access door 811, refer to AMM Task
52-41-00-410-801.
(d) Put the aircraft back to its initial configuration.
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 36
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 43

@A340
SERVICE BULLETIN
Appendix 01 - Glossary
**CONF ALL
ACRONYM
 FULL FORM
AD
 Airworthiness Directive
BITE
 Built-In Test Equipment
ECAM
 Electronic Centralized Aircraft Monitoring
EFCS
 Electrical Flight Control System
EIVMU
 Engine Interface and Vibration Monitoring Unit
EWD
 Engine/Warning Display
FCDC
 Flight Control Data Concentrator
FR
 Frame
LRU
 Line Replaceable Unit
MCDU
 Multipurpose Control and Display Unit
OBRM
 On Board Replaceable Module
PN
 Part Number
RC
 Required for Compliance
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 44

@A340
SERVICE BULLETIN
Service Bulletin REPORTING
TITLE: FLIGHT CONTROLS - FLIGHT CONTROL DATA CONCENTRATOR
(FCDC) - INTRODUCE FCDC STD L26 M25 P16 ON BASIC A/C
MODIFICATION No.: 204828S32944
SB Reporting status
This Service Bulletin will only be incorporated into affected customized Maintenance and Flight
Operations Products if it is duly reported to Airbus.
General information
The SB Reporting policy is published in ISI 00.00.00135. This document provides information regarding:
the SB Reporting means and benefits, the update of customized Maintenance Products and customized
Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations Products" for
further information on the update of affected Flight Operations Products.
SB Reporting procedure
Standard practice to report SB is to use the online reporting application on AirbusWorld.
Refer to ISI 00.00.00179:
- For complete information on reporting means to Airbus. Question 2 "What are the standard
practices for SB reporting?"
- If this SB requires previous or simultaneous accomplishment of other SBs, Question 3 "What about
the reporting of prerequisite Service Bulletin?"
NOTE:
 ISI 00.00.00179 covers all the frequently asked questions about SB Reporting. It is revised on a
regular basis.
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 45

@A340
SERVICE BULLETIN
QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin. The reported data
that you provide us will be used to analyse areas of difficulties and to take corrective action to further
improve the quality of our Service Bulletins.
We thank you for the time you have taken in completing this form.
(Please rate on a scale of 1 to 4, with 4 being the highest score)
- Quality rating of this SB 4321
- Quality rating of the Accomplishment Instructions 4321
- Quality rating of the Illustrations 4321
- Is this SB easy to understand ? Y/N
If you have had difficulties in the accomplishment of this SB please quote below the area(s) and give a
short description of the issue.
Planning Material Instructions
X Effectivity X Kit content X Preparation
X Reason X List of Materials Operator Supplied X Mod/Inspection
X Manpower X Industry support X Test
X References X Re-identification X Close-Up
X Publication X Tooling X Illustrations
Comments:
Operator: Date:
Name/Title:
Please return this form to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn : SEM4 Service Bulletins Management
F A X:( 3 3 )56 19 34 25 1
Or via your Resident Customer Support Office.
DATE: Jul 15/19 SERVICE BULLETIN No.: A340-27-4211
REVISION No.: 00 - Jul 15/19 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
