# Airbus Service Bulletin A340-27-4213

Copy: No revision named ("A340-27-4213 R00"), 302 pages: PDF https://openairdocs.org/files/sha256/20/65/20657ff03c333dbefa0991d139201beee30d74e4de1fda31414da39e2b3b76bc; text https://openairdocs.org/service-documents/airbus/a340-27-4213/file/20657ff03c33.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2022-0522, the docket of AD 2022-16-06. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A340-27-4213
- Page: https://openairdocs.org/service-documents/airbus/a340-27-4213

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a340-27-4213/proposed.md).

## Text (302 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2022-0522, the docket of AD 2022-16-06. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 1
CONF ALL
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
 
The content of this document is the property of Airbus. All rights including copyrights are reserved.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
MANDATORY MANDATORY MANDATORY
ATA SYSTEM: 27
TITLE: FLIGHT CONTROLS - TRIMMABLE HORIZONTAL STABILIZER (THS)
HYDRAULIC ACTUATION - INTRODUCE WIRING PROVISION FOR LOAD
SENSING DEVICE (LSD) RETROFIT
MODIFICATION No.:
CONF 001
208458S34974
CONF 002-005
208459S34991

### Page 2

A340
SERVICE BULLETIN
SUMMARY
REV 00 Oct 12/20 A340-27-4213
Page 2
ATA SYSTEM: 27
TITLE: FLIGHT CONTROLS - TRIMMABLE HORIZONTAL STABILIZER (THS)
HYDRAULIC ACTUATION - INTRODUCE WIRING PROVISION FOR LOAD
SENSING DEVICE (LSD) RETROFIT
CONF ALL
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
CONF 001
MODIFICATION CLASSIFICATION
MAJOR None
MINOR 208458S34974
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
NOTE: This modification is related to an airworthiness issue and has been re-classified and
confirmed by EASA as minor in accordance with EU Part 21.A.91. As such, this is
handled by Airbus under the Design Organisation Approval ref. EASA.21J.031.
CONF 002
MODIFICATION CLASSIFICATION
MAJOR None
MINOR 208459S34991
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
NOTE: This modification is related to an airworthiness issue and has been re-classified and
confirmed by EASA as minor in accordance with EU Part 21.A.91. As such, this is
handled by Airbus under the Design Organisation Approval ref. EASA.21J.031.
CONF 003
MODIFICATION CLASSIFICATION
MAJOR None
MINOR 208459S34991
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
NOTE: This modification is related to an airworthiness issue and has been re-classified and
confirmed by EASA as minor in accordance with EU Part 21.A.91. As such, this is
handled by Airbus under the Design Organisation Approval ref. EASA.21J.031.
CONF 004

### Page 3

A340
SERVICE BULLETIN
SUMMARY
REV 00 Oct 12/20 A340-27-4213
Page 3
MODIFICATION CLASSIFICATION
MAJOR None
MINOR 208459S34991
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
NOTE: This modification is related to an airworthiness issue and has been re-classified and
confirmed by EASA as minor in accordance with EU Part 21.A.91. As such, this is
handled by Airbus under the Design Organisation Approval ref. EASA.21J.031.
CONF 005
MODIFICATION CLASSIFICATION
MAJOR None
MINOR 208459S34991
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
NOTE: This modification is related to an airworthiness issue and has been re-classified and
confirmed by EASA as minor in accordance with EU Part 21.A.91. As such, this is
handled by Airbus under the Design Organisation Approval ref. EASA.21J.031.
CONF ALL
B. REASON
(1) History
The Trimmable Horizontal Stabilizer (THS) actuator has a fail-safe design: each
attachment, upper and lower, has two load paths. A normally loaded primary load
path and a secondary load path, which is only engaged in case of primary load path
rupture.
When the secondary load path is engaged, the design purpose was to generate a
stall of the unit by friction and to detect it by the position monitoring. It has been
demonstrated by test that the upper secondary load path does not stall correctly.
Hence a new device has been developed, called Load Sensing Device (LSD),
manufactured by COLLINS Aerospace, which lead to detect the THS actuator upper
secondary load path engagement.
The wiring provisions for the connection of the LSD in production are introduced
through MOD No. 205978S33729.
(2) Objective/Action
This Service Bulletin recommends installing the wiring provision for the LSD.
It implies:
- The installation of specific secure open Circuit Breaker (C/B) (59CS) on the 309PP
in the Auxillary Power Unit (APU) Starter Box (5000VE)
- T o modify associated electrical and mechanical installation running from the C/B
59CS into the THS actuator, zone 312.

### Page 4

A340
SERVICE BULLETIN
SUMMARY
REV 00 Oct 12/20 A340-27-4213
Page 4
(3) Advantages
Accomplishment of this Service Bulletin in conjunction with the Service Bulletin No.
Ref. SB A340-27-4214 will allow immediate detection in case of upper secondary load
path engagement. The periodic detailed inspection of THS actuator upper attachments
for secondary load path loading will however remain in order to ensure that remote
cases of partial loading are also detected.
(4) Operational/Maintenance Consequences
None
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO
A/C OPERATION
AFFECTED
NO VENDOR SB NO
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD YES
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
NOTE: Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION
CONF 001
No specific aircraft maintenance configuration required.
CONF 002
No specific aircraft maintenance configuration required.
CONF 003
No specific aircraft maintenance configuration required.
CONF 004
No specific aircraft maintenance configuration required.
CONF 005
No specific aircraft maintenance configuration required.
CONF ALL
E. MATERIAL PRICE INFORMATION
CONF 001
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Part kit 274213D01R01 1 18500.00 USD Brackets, clamps, connectors,
fasteners, harness
Part kit 274213D07R01 1 380.00 USD Circuit breaker, fasteners,
placard set, shunt
TOTAL   18880.00 USD

### Page 5

A340
SERVICE BULLETIN
SUMMARY
REV 00 Oct 12/20 A340-27-4213
Page 5
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Components See SB See Note Placard set
NOTE: Price information to be obtained from the given supplier.
CONF 002
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Part kit 274213D02R01 1 17500.00 USD Angle, brackets, clamps,
connectors, fasteners, harness
Part kit 274213D03R00 1 600.00 USD Brackets, fasteners
Part kit 274213D07R01 1 380.00 USD Circuit breaker, fasteners,
placard set, shunt
TOTAL   18480.00 USD  
Components See SB See Note Placard set
NOTE: Price information to be obtained from the given supplier.
CONF 003
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Part kit 274213D02R01 1 17500.00 USD Angle, brackets, clamps,
connectors, fasteners, harness
Part kit 274213D04R00 1 770.00 USD Brackets, fasteners
Part kit 274213D07R01 1 380.00 USD Circuit breaker, fasteners,
placard set, shunt
TOTAL   18650.00 USD  
Components See SB See Note Placard set
NOTE: Price information to be obtained from the given supplier.
CONF 004
(1) Modification of the Wiring for LSD

### Page 6

A340
SERVICE BULLETIN
SUMMARY
REV 00 Oct 12/20 A340-27-4213
Page 6
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Part kit 274213D02R01 1 17500.00 USD Angle, brackets, clamps,
connectors, fasteners, harness
Part kit 274213D05R00 1 600.00 USD Brackets, fasteners
Part kit 274213D07R01 1 380.00 USD Circuit breaker, fasteners,
placard set, shunt
TOTAL   18480.00 USD  
Components See SB See Note Placard set
NOTE: Price information to be obtained from the given supplier.
CONF 005
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Part kit 274213D02R01 1 17500.00 USD Angle, brackets, clamps,
connectors, fasteners, harness
Part kit 274213D06R00 1 600.00 USD Brackets, fasteners
Part kit 274213D07R01 1 380.00 USD Circuit breaker, fasteners,
placard set, shunt
TOTAL   18480.00 USD  
Components See SB See Note Placard set
NOTE: Price information to be obtained from the given supplier.
CONF ALL
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
01V 06Y 14S 15R 17M 26L 31V 34N 36L 39N 41N 65W 68M 72T 82M 84W 90O 98W ABB
ABD AFR AIB ARG AXY BOE DGA DLH EDW F2I GAF HFM HFY IRC IRM KAC KMF LHT M3R MAU
MDG MRJ MSR PUE QQE ROI S3R SAA SAS SFB SWR SYR U6A VCV
G. CONCURRENT REQUIREMENTS
None
H. NATURE OF THE WORK
CONF 001
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
AIRCRAFT YES
EQUIPMENT YES

### Page 7

A340
SERVICE BULLETIN
SUMMARY
REV 00 Oct 12/20 A340-27-4213
Page 7
CONF 002
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
AIRCRAFT YES
EQUIPMENT YES
CONF 003
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
AIRCRAFT YES
EQUIPMENT YES
CONF 004
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
AIRCRAFT YES
EQUIPMENT YES
CONF 005
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
AIRCRAFT YES
EQUIPMENT YES
CONF ALL
I. MANPOWER
CONF 001
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
MANPOWER
TOTAL MAN-HOURS 54.00 h
ELAPSED TIME (HOURS) 54.00 h
CONF 002
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
MANPOWER
TOTAL MAN-HOURS 54.00 h
ELAPSED TIME (HOURS) 54.00 h
CONF 003
(1) Modification of the Wiring for LSD

### Page 8

A340
SERVICE BULLETIN
SUMMARY
REV 00 Oct 12/20 A340-27-4213
Page 8
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
MANPOWER
TOTAL MAN-HOURS 54.00 h
ELAPSED TIME (HOURS) 54.00 h
CONF 004
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
MANPOWER
TOTAL MAN-HOURS 54.00 h
ELAPSED TIME (HOURS) 54.00 h
CONF 005
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
MANPOWER
TOTAL MAN-HOURS 54.00 h
ELAPSED TIME (HOURS) 54.00 h

### Page 9

A340
SERVICE BULLETIN
SUMMARY
Figure ICN-A340-A-27XX4213-A-FAPE3-01A36-A-002-01 SHEET 1/1
REV 00 Oct 12/20 A340-27-4213General overview
Page 9
CONF ALL
J. GENERAL OVERVIEW
CONF 001
FR87
FR86
FR85
FR84
FR83
FR80
FR91
/82
5871VB /1M
5869VB /1MF
5870VB /2MF
A
A
Z310
ICN-A340-A-27XX4213-A-FAPE3-01A36-A-002-01

### Page 10

A340
SERVICE BULLETIN
SUMMARY
Figure ICN-A340-A-27XX4213-A-FAPE3-01A2K-A-001-01 SHEET 1/1
REV 00 Oct 12/20 A340-27-4213General overview
Page 10
CONF 002-005
FR87
FR86
FR85
FR84
FR83
FR80
FR91
/82
A
5870VB /2MF
5871VB /1M
5869VB /1MF
A
Z310
ICN-A340-A-27XX4213-A-FAPE3-01A2K-A-001-01

### Page 11

A340
SERVICE BULLETIN
SUMMARY
Figure ICN-A340-A-27XX4213-A-FAPE3-01A2L-A-001-01 SHEET 1/1
REV 00 Oct 12/20 A340-27-4213General overview
Page 11
CONF ALL
FR73
FR65
Z160
MODIFICATION OF THE APU STARTER BOX
ICN-A340-A-27XX4213-A-FAPE3-01A2L-A-001-01

### Page 12

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 12
ATA SYSTEM: 27
TITLE: FLIGHT CONTROLS - TRIMMABLE HORIZONTAL STABILIZER (THS)
HYDRAULIC ACTUATION - INTRODUCE WIRING PROVISION FOR LOAD
SENSING DEVICE (LSD) RETROFIT
1. PLANNING INFORMATION
A. APPLICABILITY
NOTE: These modifications are applicable by Service Bulletin only.
(1) Models
ON A/C 0026, 0031, 0063, 0074, 0075, 0080, 0081
340-211
ON A/C 0009, 0014, 0022, 0038, 0043, 0046, 0061, 0156, 0159, 0178
340-212
ON A/C 0004, 0151, 0204
340-213
ON A/C 0002, 0020, 0029, 0056, 0058, 0078, 0084, 0115
340-311
ON A/C 0041, 0044, 0047, 0051, 0076, 0079, 0091, 0094, 0367, 0374, 0381
340-312
ON A/C 0089, 0090, 0093, 0101, 0104, 0114, 0117, 0123, 0125, 0126, 0128, 0134, 0135,
0139, 0145, 0146, 0149, 0152, 0158, 0163, 0164, 0166, 0168, 0170, 0174, 0175, 0179,
0180, 0185, 0186, 0190, 0192-0194, 0197, 0199, 0201, 0202, 0207, 0208, 0210, 0212-0215,
0217, 0221, 0233, 0236, 0237, 0242, 0243, 0245, 0246, 0252, 0257, 0260, 0264, 0268,
0270, 0274, 0278, 0280, 0282, 0292, 0297, 0302, 0304, 0310, 0318, 0319, 0321, 0325,
0327, 0329, 0331, 0332, 0335, 0347, 0352, 0354, 0355, 0373, 0377-0379, 0385, 0387, 0390,
0395, 0399, 0402, 0406, 0411, 0413, 0415, 0424, 0430, 0433-0435, 0438, 0446, 0447, 0450,
0459, 0467, 0470, 0474, 0483, 0528, 0538, 0541, 0544-0546, 0554, 0556, 0559, 0561, 0562,
0582, 0585, 0590, 0598, 0643, 0646, 0651, 0668, 0793, 0800, 0835, 0844, 0921, 0938, 0955
340-313
CONF ALL
(2) Applicability by MSN
0002 0004 0009 0014 0020 0022 0026 0029 0031 0038 0041 0043 0044 0046 0047
0051 0056 0058 0061 0063 0074-0076 0078-0081 0084 0089-0091 0093 0094 0101
0104 0114 0115 0117 0123 0125 0126 0128 0134 0135 0139 0145 0146 0149 0151
0152 0156 0158 0159 0163 0164 0166 0168 0170 0174 0175 0178-0180 0185 0186
0190 0192-0194 0197 0199 0201 0202 0204 0207 0208 0210 0212-0215 0217 0221
0233 0236 0237 0242 0243 0245 0246 0252 0257 0260 0264 0268 0270 0274 0278
0280 0282 0292 0297 0302 0304 0310 0318 0319 0321 0325 0327 0329 0331 0332
0335 0347 0352 0354 0355 0367 0373 0374 0377-0379 0381 0385 0387 0390 0395
0399 0402 0406 0411 0413 0415 0424 0430 0433-0435 0438 0446 0447 0450 0459
0467 0470 0474 0483 0528 0538 0541 0544-0546 0554 0556 0559 0561 0562 0582
0585 0590 0598 0643 0646 0651 0668 0793 0800 0835 0844 0921 0938 0955
(3) MSN by configuration
CONF 001

### Page 13

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 13
MSN CONFIGURATION
0197 0199 0201 0202 0204 0207 0208 0210 0212 0213 0214
0215 0217 0221 0233 0236 0237 0242 0243 0245 0246 0252
0257 0260 0264 0268 0270 0274 0278 0280 0282 0292 0297
0302 0304 0310 0318 0319 0321 0325 0327 0329 0331 0332
0335 0347 0352 0354 0355 0367 0373 0374 0377 0378 0379
0381 0385 0387 0390 0395 0399 0402 0406 0411 0413 0415
0424 0430 0433 0434 0435 0438 0446 0447 0450 0459 0467
0470 0474 0483 0528 0538 0541 0544 0545 0546 0554 0556
0559 0561 0562 0582 0585 0590 0598 0643 0646 0651 0668
0793 0800 0835 0844 0921 0938 0955
001
CONF 002
MSN CONFIGURATION
0114 0115 0117 0123 0125 0126 0128 0134 0135 0139 0145
0146 0149 0151 0152 0156 0158 0159
002
CONF 003
MSN CONFIGURATION
0163 0164 0166 0168 0170 0174 0175 0178 0179 0180 0185
0186 0190 0192 0193 0194
003
CONF 004
MSN CONFIGURATION
0004 0009 0014 0020 0022 0026 0029 0031 0038 0041 0043
0044 0046 0047 0051 0056 0058 0061 0063 0074 0075 0076
0078 0079 0080 0081 0084 0089 0090 0091 0093 0094 0101
0104
004
CONF 005
MSN CONFIGURATION
0002 005
CONF ALL
(4) Configuration definition
CONF 001
Configuration 001
CONF 001 regards the specific PRE-SB status of the related aircraft.
CONF 001 retrofits following modifications: 208458S34974.
CONF 002
Configuration 002
CONF 002 regards the specific PRE-SB status of the related aircraft.
CONF 002 retrofits following modifications: 208459S34991.
CONF 003
Configuration 003
CONF 003 regards the specific PRE-SB status of the related aircraft.
CONF 003 retrofits following modifications: 208459S34991.

### Page 14

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 14
CONF 004
Configuration 004
CONF 004 regards the specific PRE-SB status of the related aircraft.
CONF 004 retrofits following modifications: 208459S34991.
CONF 005
Configuration 005
CONF 005 regards the specific PRE-SB status of the related aircraft.
CONF 005 retrofits following modifications: 208459S34991.
CONF ALL
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
The Trimmable Horizontal Stabilizer (THS) actuator has a fail-safe design: each
attachment, upper and lower, has two load paths. A normally loaded primary load
path and a secondary load path, which is only engaged in case of primary load path
rupture.
When the secondary load path is engaged, the design purpose was to generate a
stall of the unit by friction and to detect it by the position monitoring. It has been
demonstrated by test that the upper secondary load path does not stall correctly.
Hence a new device has been developed, called Load Sensing Device (LSD),
manufactured by COLLINS Aerospace, which lead to detect the THS actuator upper
secondary load path engagement.
The wiring provisions for the connection of the LSD in production are introduced
through MOD No. 205978S33729.
(2) Objective/Action
This Service Bulletin recommends installing the wiring provision for the LSD.
It implies:
- The installation of specific secure open Circuit Breaker (C/B) (59CS) on the 309PP
in the Auxillary Power Unit (APU) Starter Box (5000VE)
- T o modify associated electrical and mechanical installation running from the C/B
59CS into the THS actuator, zone 312.
(3) Advantages
Accomplishment of this Service Bulletin in conjunction with the Service Bulletin No.
Ref. SB A340-27-4214 will allow immediate detection in case of upper secondary load
path engagement. The periodic detailed inspection of THS actuator upper attachments
for secondary load path loading will however remain in order to ensure that remote
cases of partial loading are also detected.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
T o accomplish this Service Bulletin it is necessary to:

### Page 15

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 15
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
CONF 001
1 Cut the Wire 2499-5020 in the Electrical Harness 5871VB
CONF 002-005
1 Cut the Wire 2499-5020 in the Electrical Harness 5871VB
CONF 001
2 Remove the Electrical Harness 5869VB from the Traverse Structure
between FR86 and FR87
CONF 002-005
2 Remove the Electrical Harness 5869VB from the V-Prop Structure between
FR86 and FR87
CONF 001
3 Remove the Electrical Harness 5870VB from the Traverse Structure
between FR86 and FR87
CONF 002-005
3 Remove the Electrical Harness 5870VB from the V-Prop Structure between
FR86 and FR87
CONF 001
4 Modify the Traverse Structure at FR87
CONF 002
4 Modify the V-Prop Structure at FR87
CONF 003
4 Modify the V-Prop Structure at FR87
CONF 004
4 Modify the V-Prop Structure at FR87
CONF 005
4 Modify the V-Prop Structure at FR87
CONF 001
5 Install the Electrical Brackets in the Traverse Structure between FR86 and
FR87
CONF 002-005
5 Install the Electrical Brackets in the V-Prop Structure between FR86 and
FR87
CONF 001
6 Install the Electrical Dummy Connectors in the Traverse Structure between
FR86 and FR87
CONF 002-005
6 Install the Electrical Dummy Connectors in the V-Prop Structure between
FR86 and FR87
CONF ALL
7 Reroute the Wire 2499-5020 between FR56 and FR69
8 Modify the C/B-Box 5000VE
CONF 001
9 Modify the Electrical Harness 5869VB in the Traverse Structure between
FR86 and FR87
CONF 002-005

### Page 16

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 16
9 Modify the Electrical Harness 5869VB in the V-Prop Structure between FR86
and FR87
CONF 001
10 Modify the Electrical Harness 5870VB in the Traverse Structure between
FR86 and FR87
CONF 002-005
10 Modify the Electrical Harness 5870VB in the V-Prop Structure between FR86
and FR87
CONF 001
11 Reroute the Cut Wire
CONF 002-005
11 Reroute the Cut Wire
CONF 001
12 Install the Modified Electrical Harness 5869VB in the Traverse Structure
between FR85 and FR87
CONF 002-005
12 Install the Modified Electrical Harness 5869VB in the V-Prop Structure
between FR85 and FR87
CONF 001
13 Install the Modified Electrical Harness 5870VB in the Traverse Structure
between FR85 and FR87
CONF 002-005
13 Install the Modified Electrical Harness 5870VB in the V-Prop Structure
between FR85 and FR87
CONF 001
14 Reroute the Reidentified Wire 2499-5020 to 5000VE
CONF 002-005
14 Reroute the Reidentified Wire 2499-5020 to 5000VE
CONF ALL
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory. It is expected that an
Airworthiness Directive (AD) published by the European Aviation Safety Agency (EASA)
will be issued to confirm this classification. The accomplishment timescale, which has
not yet been defined, will be given in the AD.
F. APPROVAL
The technical content of this document is approved under the authority of the Design
Organisation Approval ref. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
CONF 001

### Page 17

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 17
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
PREPARATION
Job Set-up 1.00 h
Aircraft System Configuration 1.00 h
PROCEDURE
Cut the Wire 2499-5020 in the Electrical Harness 5871VB 1.00 h
Remove the Electrical Harness 5869VB from the Traverse
Structure between FR86 and FR87
2.00 h
Remove the Electrical Harness 5870VB from the Traverse
Structure between FR86 and FR87
2.50 h
Modify the Traverse Structure at FR87 4.00 h
Install the Electrical Brackets in the Traverse Structure
between FR86 and FR87
3.00 h
Install the Electrical Dummy Connectors in the Traverse
Structure between FR86 and FR87
2.00 h
Reroute the Wire 2499-5020 between FR56 and FR69 1.00 h
Modify the C/B-Box 5000VE 4.00 h
Modify the Electrical Harness 5869VB in the Traverse
Structure between FR86 and FR87
6.00 h
Modify the Electrical Harness 5870VB in the Traverse
Structure between FR86 and FR87
9.00 h
Reroute the Cut Wire 1.00 h
Install the Modified Electrical Harness 5869VB in the
Traverse Structure between FR85 and FR87
5.00 h
Install the Modified Electrical Harness 5870VB in the
Traverse Structure between FR85 and FR87
6.00 h
Reroute the Reidentified Wire 2499-5020 to 5000VE 1.00 h
PREPARATION FOR TEST
Preparation for T est 0.50 h
TEST
Preliminary T est 0.50 h
T est 0.50 h
CLOSE-UP
Close-up 3.00 h
TOTAL MAN-HOURS 54.00 h
ELAPSED TIME (HOURS) 54.00 h
CONF 002
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,

### Page 18

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 18
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
PREPARATION
Job Set-up 1.00 h
Aircraft System Configuration 1.00 h
PROCEDURE
Cut the Wire 2499-5020 in the Electrical Harness 5871VB 1.00 h
Remove the Electrical Harness 5869VB from the V-Prop
Structure between FR86 and FR87
2.00 h
Remove the Electrical Harness 5870VB from the V-Prop
Structure between FR86 and FR87
2.50 h
Modify the V-Prop Structure at FR87 4.00 h
Install the Electrical Brackets in the V-Prop Structure
between FR86 and FR87
3.00 h
Install the Electrical Dummy Connectors in the V-Prop
Structure between FR86 and FR87
2.00 h
Reroute the Wire 2499-5020 between FR56 and FR69 1.00 h
Modify the C/B-Box 5000VE 4.00 h
Modify the Electrical Harness 5869VB in the V-Prop
Structure between FR86 and FR87
6.00 h
Modify the Electrical Harness 5870VB in the V-Prop
Structure between FR86 and FR87
9.00 h
Reroute the Cut Wire 1.00 h
Install the Modified Electrical Harness 5869VB in the V-Prop
Structure between FR85 and FR87
5.00 h
Install the Modified Electrical Harness 5870VB in the V-Prop
Structure between FR85 and FR87
6.00 h
Reroute the Reidentified Wire 2499-5020 to 5000VE 1.00 h
PREPARATION FOR TEST
Preparation for T est 0.50 h
TEST
Preliminary T est 0.50 h
T est 0.50 h
CLOSE-UP
Close-up 3.00 h
TOTAL MAN-HOURS 54.00 h
ELAPSED TIME (HOURS) 54.00 h
CONF 003
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts

### Page 19

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 19
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
PREPARATION
Job Set-up 1.00 h
Aircraft System Configuration 1.00 h
PROCEDURE
Cut the Wire 2499-5020 in the Electrical Harness 5871VB 1.00 h
Remove the Electrical Harness 5869VB from the V-Prop
Structure between FR86 and FR87
2.00 h
Remove the Electrical Harness 5870VB from the V-Prop
Structure between FR86 and FR87
2.50 h
Modify the V-Prop Structure at FR87 4.00 h
Install the Electrical Brackets in the V-Prop Structure
between FR86 and FR87
3.00 h
Install the Electrical Dummy Connectors in the V-Prop
Structure between FR86 and FR87
2.00 h
Reroute the Wire 2499-5020 between FR56 and FR69 1.00 h
Modify the C/B-Box 5000VE 4.00 h
Modify the Electrical Harness 5869VB in the V-Prop
Structure between FR86 and FR87
6.00 h
Modify the Electrical Harness 5870VB in the V-Prop
Structure between FR86 and FR87
9.00 h
Reroute the Cut Wire 1.00 h
Install the Modified Electrical Harness 5869VB in the V-Prop
Structure between FR85 and FR87
5.00 h
Install the Modified Electrical Harness 5870VB in the V-Prop
Structure between FR85 and FR87
6.00 h
Reroute the Reidentified Wire 2499-5020 to 5000VE 1.00 h
PREPARATION FOR TEST
Preparation for T est 0.50 h
TEST
Preliminary T est 0.50 h
T est 0.50 h
CLOSE-UP
Close-up 3.00 h
TOTAL MAN-HOURS 54.00 h
ELAPSED TIME (HOURS) 54.00 h
CONF 004
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.

### Page 20

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 20
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
PREPARATION
Job Set-up 1.00 h
Aircraft System Configuration 1.00 h
PROCEDURE
Cut the Wire 2499-5020 in the Electrical Harness 5871VB 1.00 h
Remove the Electrical Harness 5869VB from the V-Prop
Structure between FR86 and FR87
2.00 h
Remove the Electrical Harness 5870VB from the V-Prop
Structure between FR86 and FR87
2.50 h
Modify the V-Prop Structure at FR87 4.00 h
Install the Electrical Brackets in the V-Prop Structure
between FR86 and FR87
3.00 h
Install the Electrical Dummy Connectors in the V-Prop
Structure between FR86 and FR87
2.00 h
Reroute the Wire 2499-5020 between FR56 and FR69 1.00 h
Modify the C/B-Box 5000VE 4.00 h
Modify the Electrical Harness 5869VB in the V-Prop
Structure between FR86 and FR87
6.00 h
Modify the Electrical Harness 5870VB in the V-Prop
Structure between FR86 and FR87
9.00 h
Reroute the Cut Wire 1.00 h
Install the Modified Electrical Harness 5869VB in the V-Prop
Structure between FR85 and FR87
5.00 h
Install the Modified Electrical Harness 5870VB in the V-Prop
Structure between FR85 and FR87
6.00 h
Reroute the Reidentified Wire 2499-5020 to 5000VE 1.00 h
PREPARATION FOR TEST
Preparation for T est 0.50 h
TEST
Preliminary T est 0.50 h
T est 0.50 h
CLOSE-UP
Close-up 3.00 h
TOTAL MAN-HOURS 54.00 h
ELAPSED TIME (HOURS) 54.00 h
CONF 005
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification of the Wiring for LSD

### Page 21

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 21
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
PREPARATION
Job Set-up 1.00 h
Aircraft System Configuration 1.00 h
PROCEDURE
Cut the Wire 2499-5020 in the Electrical Harness 5871VB 1.00 h
Remove the Electrical Harness 5869VB from the V-Prop
Structure between FR86 and FR87
2.00 h
Remove the Electrical Harness 5870VB from the V-Prop
Structure between FR86 and FR87
2.50 h
Modify the V-Prop Structure at FR87 4.00 h
Install the Electrical Brackets in the V-Prop Structure
between FR86 and FR87
3.00 h
Install the Electrical Dummy Connectors in the V-Prop
Structure between FR86 and FR87
2.00 h
Reroute the Wire 2499-5020 between FR56 and FR69 1.00 h
Modify the C/B-Box 5000VE 4.00 h
Modify the Electrical Harness 5869VB in the V-Prop
Structure between FR86 and FR87
6.00 h
Modify the Electrical Harness 5870VB in the V-Prop
Structure between FR86 and FR87
9.00 h
Reroute the Cut Wire 1.00 h
Install the Modified Electrical Harness 5869VB in the V-Prop
Structure between FR85 and FR87
5.00 h
Install the Modified Electrical Harness 5870VB in the V-Prop
Structure between FR85 and FR87
6.00 h
Reroute the Reidentified Wire 2499-5020 to 5000VE 1.00 h
PREPARATION FOR TEST
Preparation for T est 0.50 h
TEST
Preliminary T est 0.50 h
T est 0.50 h
CLOSE-UP
Close-up 3.00 h
TOTAL MAN-HOURS 54.00 h
ELAPSED TIME (HOURS) 54.00 h
CONF ALL
H. WEIGHT AND BALANCE
Not changed
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
CONF 001

### Page 22

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 22
(1) Modification of the Wiring for LSD
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
AIRCRAFT MAINTENANCE MANUAL (AMM)
06-20-00, Page Block 001 06-31-53, Page Block 001
06-41-53, Page Block 001 T ask 11-00-00-400-802
T ask 12-34-24-860-802 T ask 20-16-00-912-801
T ask 20-21-11-911-801 T ask 20-28-00-912-810
T ask 21-26-00-710-803 T ask 22-96-00-740-801
T ask 22-97-00-740-801 T ask 24-41-00-861-801
T ask 24-41-00-862-801
T ask 25-53-00-000-801
T ask 25-53-00-400-801
T ask 25-54-00-000-801
T ask 25-54-00-400-801
T ask 27-44-51-400-801 T ask 31-18-51-000-801
T ask 31-18-51-400-801
T ask 31-50-00-710-803
T ask 31-50-00-740-801
T ask 31-60-00-710-802
T ask 33-14-00-710-801 T ask 52-30-00-410-803
52-41-00, Page Block 001
AIRCRAFT WIRING MANUAL (AWM)
27-98-08
ELECTRICAL STANDARD PRACTICES MANUAL (ESPM)
20-33-00 20-33-42
20-33-44 20-43-12
20-51-20 20-52-10
20-52-21 20-54-50
20-55-00 20-56-51
SERVICE BULLETIN (SB)
A340-27-4214
STRUCTURAL REPAIR MANUAL (SRM)
51-24-00 51-40-00
51-42-00 51-44-00
51-75-12
TECHNICAL FOLLOW UP (TFU)
27.44.00.022
STANDARDS MANUAL (SM)
CONF 002
(1) Modification of the Wiring for LSD

### Page 23

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 23
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
AIRCRAFT MAINTENANCE MANUAL (AMM)
06-20-00, Page Block 001 06-31-53, Page Block 001
06-41-53, Page Block 001 T ask 11-00-00-400-802
T ask 12-34-24-860-802 T ask 20-16-00-912-801
T ask 20-21-11-911-801 T ask 20-28-00-912-810
T ask 21-26-00-710-803 T ask 22-96-00-740-801
T ask 22-97-00-740-801 T ask 24-41-00-861-801
T ask 24-41-00-862-801
T ask 25-53-00-000-801
T ask 25-53-00-400-801
T ask 25-54-00-000-801
T ask 25-54-00-400-801
T ask 27-44-51-400-801 T ask 31-18-51-000-801
T ask 31-18-51-400-801
T ask 31-50-00-710-803
T ask 31-50-00-740-801
T ask 31-60-00-710-802
T ask 33-14-00-710-801 T ask 52-30-00-410-803
52-41-00, Page Block 001
AIRCRAFT WIRING MANUAL (AWM)
27-98-08
ELECTRICAL STANDARD PRACTICES MANUAL (ESPM)
20-33-00 20-33-42
20-33-44 20-43-12
20-51-20 20-52-10
20-52-21 20-54-50
20-55-00 20-56-51
SERVICE BULLETIN (SB)
A340-27-4214
STRUCTURAL REPAIR MANUAL (SRM)
51-24-00 51-40-00
51-42-00 51-44-00
51-75-12
TECHNICAL FOLLOW UP (TFU)
27.44.00.022
STANDARDS MANUAL (SM)
CONF 003
(1) Modification of the Wiring for LSD

### Page 24

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 24
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
AIRCRAFT MAINTENANCE MANUAL (AMM)
06-20-00, Page Block 001 06-31-53, Page Block 001
06-41-53, Page Block 001 T ask 11-00-00-400-802
T ask 12-34-24-860-802 T ask 20-16-00-912-801
T ask 20-21-11-911-801 T ask 20-28-00-912-810
T ask 21-26-00-710-803 T ask 22-96-00-740-801
T ask 22-97-00-740-801 T ask 24-41-00-861-801
T ask 24-41-00-862-801
T ask 25-53-00-000-801
T ask 25-53-00-400-801
T ask 25-54-00-000-801
T ask 25-54-00-400-801
T ask 27-44-51-400-801 T ask 31-18-51-000-801
T ask 31-18-51-400-801
T ask 31-50-00-710-803
T ask 31-50-00-740-801
T ask 31-60-00-710-802
T ask 33-14-00-710-801 T ask 52-30-00-410-803
52-41-00, Page Block 001
AIRCRAFT WIRING MANUAL (AWM)
27-98-08
ELECTRICAL STANDARD PRACTICES MANUAL (ESPM)
20-33-00 20-33-42
20-33-44 20-43-12
20-51-20 20-52-10
20-52-21 20-54-50
20-55-00 20-56-51
SERVICE BULLETIN (SB)
A340-27-4214
STRUCTURAL REPAIR MANUAL (SRM)
51-24-00 51-40-00
51-42-00 51-44-00
51-75-12
TECHNICAL FOLLOW UP (TFU)
27.44.00.022
STANDARDS MANUAL (SM)
CONF 004
(1) Modification of the Wiring for LSD

### Page 25

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 25
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
AIRCRAFT MAINTENANCE MANUAL (AMM)
06-20-00, Page Block 001 06-31-53, Page Block 001
06-41-53, Page Block 001 T ask 11-00-00-400-802
T ask 12-34-24-860-802 T ask 20-16-00-912-801
T ask 20-21-11-911-801 T ask 20-28-00-912-810
T ask 21-26-00-710-803 T ask 22-96-00-740-801
T ask 22-97-00-740-801 T ask 24-41-00-861-801
T ask 24-41-00-862-801
T ask 25-53-00-000-801
T ask 25-53-00-400-801
T ask 25-54-00-000-801
T ask 25-54-00-400-801
T ask 27-44-51-400-801 T ask 31-18-51-000-801
T ask 31-18-51-400-801
T ask 31-50-00-710-803
T ask 31-50-00-740-801
T ask 31-60-00-710-802
T ask 33-14-00-710-801 T ask 52-30-00-410-803
52-41-00, Page Block 001
AIRCRAFT WIRING MANUAL (AWM)
27-98-08
ELECTRICAL STANDARD PRACTICES MANUAL (ESPM)
20-33-00 20-33-42
20-33-44 20-43-12
20-51-20 20-52-10
20-52-21 20-54-50
20-55-00 20-56-51
SERVICE BULLETIN (SB)
A340-27-4214
STRUCTURAL REPAIR MANUAL (SRM)
51-24-00 51-40-00
51-42-00 51-44-00
51-75-12
TECHNICAL FOLLOW UP (TFU)
27.44.00.022
STANDARDS MANUAL (SM)
CONF 005
(1) Modification of the Wiring for LSD

### Page 26

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 26
(a) T ask set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring for LSD
AIRCRAFT MAINTENANCE MANUAL (AMM)
06-20-00, Page Block 001 06-31-53, Page Block 001
06-41-53, Page Block 001 T ask 11-00-00-400-802
T ask 12-34-24-860-802 T ask 20-16-00-912-801
T ask 20-21-11-911-801 T ask 20-28-00-912-810
T ask 21-26-00-710-803 T ask 22-96-00-740-801
T ask 22-97-00-740-801 T ask 24-41-00-861-801
T ask 24-41-00-862-801
T ask 25-53-00-000-801
T ask 25-53-00-400-801
T ask 25-54-00-000-801
T ask 25-54-00-400-801
T ask 27-44-51-400-801 T ask 31-18-51-000-801
T ask 31-18-51-400-801
T ask 31-50-00-710-803
T ask 31-50-00-740-801
T ask 31-60-00-710-802
T ask 33-14-00-710-801 T ask 52-30-00-410-803
52-41-00, Page Block 001
AIRCRAFT WIRING MANUAL (AWM)
27-98-08
ELECTRICAL STANDARD PRACTICES MANUAL (ESPM)
20-33-00 20-33-42
20-33-44 20-43-12
20-51-20 20-52-10
20-52-21 20-54-50
20-55-00 20-56-51
SERVICE BULLETIN (SB)
A340-27-4214
STRUCTURAL REPAIR MANUAL (SRM)
51-24-00 51-40-00
51-42-00 51-44-00
51-75-12
TECHNICAL FOLLOW UP (TFU)
27.44.00.022
STANDARDS MANUAL (SM)
CONF ALL
K. PUBLICATION AFFECTED
AIRCRAFT SCHEMATIC MANUAL (ASM)
AIRCRAFT WIRING LIST (AWL)

### Page 27

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 27
AIRCRAFT WIRING MANUAL (AWM)
ILLUSTRATED PARTS CATALOG (IPC)
L. INDUSTRY SUPPORT INFORMATION
AIRBUS will share the costs of accomplishment of this Service Bulletin by providing the kits
at no charge for orders placed before May 31/24.
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.

### Page 28

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 28
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
CONF 001
Material for task set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring
for LSD
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Part kit 274213D01R01 1
Part kit 274213D07R01 1
Components See SB
Re-identified parts See SB
CONF 002
Material for task set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring
for LSD
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Part kit 274213D02R01 1
Part kit 274213D03R00 1
Part kit 274213D07R01 1
Components See SB
Re-identified parts See SB
CONF 003
Material for task set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring
for LSD
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Part kit 274213D02R01 1
Part kit 274213D04R00 1
Part kit 274213D07R01 1
Components See SB
Re-identified parts See SB
CONF 004
Material for task set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring
for LSD
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Part kit 274213D02R01 1

### Page 29

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 29
MATERIAL QTY SEE NOTES
Part kit 274213D05R00 1
Part kit 274213D07R01 1
Components See SB
Re-identified parts See SB
CONF 005
Material for task set A340-A-27-XX-4213-01000-93AA-A Modification of the Wiring
for LSD
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Part kit 274213D02R01 1
Part kit 274213D06R00 1
Part kit 274213D07R01 1
Components See SB
Re-identified parts See SB
CONF ALL
B. TOOLING
CONF 001
Referenced tools for task set A340-A-27-XX-4213-01000-93AA-A Modification of
the Wiring for LSD
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. AMM T ask 24-41-00-861-801
Ref. ESPM 20-52-21
CONF 002
Referenced tools for task set A340-A-27-XX-4213-01000-93AA-A Modification of
the Wiring for LSD
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. AMM T ask 24-41-00-861-801
Ref. ESPM 20-52-21
CONF 003
Referenced tools for task set A340-A-27-XX-4213-01000-93AA-A Modification of
the Wiring for LSD
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. AMM T ask 24-41-00-861-801
Ref. ESPM 20-52-21
CONF 004
Referenced tools for task set A340-A-27-XX-4213-01000-93AA-A Modification of
the Wiring for LSD
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. AMM T ask 24-41-00-861-801

### Page 30

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 30
Ref. ESPM 20-52-21
CONF 005
Referenced tools for task set A340-A-27-XX-4213-01000-93AA-A Modification of
the Wiring for LSD
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. AMM T ask 24-41-00-861-801
Ref. ESPM 20-52-21
CONF ALL
C. CONSUMABLES
CONF 001
Consumables for task set A340-A-27-XX-4213-01000-93AA-A Modification of the
Wiring for LSD
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04CMA2 Wash Primer - - - Structure
04EAC2
Primer Polyurethane Paint
- - CorrosionInhibiting
Structure
04JME4 T op Coat Polyurethane - -Grey InternalStructure
06AAC1 Polysulfide Sealant -General Purpose Interfay
08BAA9 Non Aqueous Cleaner -General
14QEB1 Wire - Locking Dia: 0.6 mmCRES Nickel Alloy
14SBA1 T extile - Lint free Cotton
CONF 002
Consumables for task set A340-A-27-XX-4213-01000-93AA-A Modification of the
Wiring for LSD
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04EAC2
Primer Polyurethane Paint
- - CorrosionInhibiting
Structure
04JME4 T op Coat Polyurethane - -Grey InternalStructure
08BAA9 Non Aqueous Cleaner -General
14QEB1 Wire - Locking Dia: 0.6 mmCRES Nickel Alloy
14SBA1 T extile - Lint free Cotton
CONF 003
Consumables for task set A340-A-27-XX-4213-01000-93AA-A Modification of the
Wiring for LSD

### Page 31

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 31
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04EAC2
Primer Polyurethane Paint
- - CorrosionInhibiting
Structure
04JME4 T op Coat Polyurethane - -Grey InternalStructure
08BAA9 Non Aqueous Cleaner -General
14QEB1 Wire - Locking Dia: 0.6 mmCRES Nickel Alloy
14SBA1 T extile - Lint free Cotton
CONF 004
Consumables for task set A340-A-27-XX-4213-01000-93AA-A Modification of the
Wiring for LSD
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04EAC2
Primer Polyurethane Paint
- - CorrosionInhibiting
Structure
04JME4 T op Coat Polyurethane - -Grey InternalStructure
08BAA9 Non Aqueous Cleaner -General
14QEB1 Wire - Locking Dia: 0.6 mmCRES Nickel Alloy
14SBA1 T extile - Lint free Cotton
CONF 005
Consumables for task set A340-A-27-XX-4213-01000-93AA-A Modification of the
Wiring for LSD
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04EAC2
Primer Polyurethane Paint
- - CorrosionInhibiting
Structure
04JME4 T op Coat Polyurethane - -Grey InternalStructure
08BAA9 Non Aqueous Cleaner -General
14QEB1 Wire - Locking Dia: 0.6 mmCRES Nickel Alloy
14SBA1 T extile - Lint free Cotton
CONF ALL
D. LIST OF NEW PARTS
CONF 001
Part kit 274213D01R01
Cost 18500.00 USD
Availability 240 d (calendar days from receipt of order)

### Page 32

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 32
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead time for ordering purposes shall be
obtained through the AIRBUS Spares portal or through a request for quotation to
airbus.kit@airbus.com.
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.
Procurement address D4296
AIRBUS
Material, Logistics and Suppliers ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
Phone: +49 40 743 51616
E-mail: airbus.kit@airbus.com
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 NAS1801-3-9 12 SCREW
2 NAS1801-3-21 21 SCREW
3 NAS1801-08-21 2 SCREW
4 NAS1101-04-6 1 SCREW
5 NAS1101-04-7 9 SCREW
6 NAS1291C3M 18 NUT
7 MS21042-04 10 NUT
8 NSA5066-3-1 5 NUT
9 NSA5067-3-1 2 NUT
10 NSA935808C01 17 WASHER
11 NAS1149C0332R 29 WASHER
12 NAS1149CN832R 2 WASHER
13 NAS1149CN432R 10 WASHER
14 AS21919WCH15 1 CLAMP
15 AS21919WCH08 5 CLAMP
16 AS21919WCH09 2 CLAMP
17 AS21919WCH10 2 CLAMP
18 AS21919WCH12 2 CLAMP
19 AS21919WCH13 4 CLAMP
20 NSA5527-03-08 6 SPACER
21 NSA5527-03-08D 17 SPACER
22 F9297582000000 1 HARNESS
23 EN2997KE508 1 CONNECTR
24 EN2997KE510 1 CONNECTR

### Page 33

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 33
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
25 ABS0805-09 6 CLAMP
26 ABS0805-10 5 CLAMP
27 ABS0805-11 2 CLAMP
28 ABS0805-12 4 CLAMP
29 ABS0805-13 2 CLAMP
30 ABS0805-15 2 CLAMP
31 F5398895403200 1 BRACKET
32 F5398895426000 1 BRACKET
33 F5398895426200 1 BRACKET
34 D5357068121400 1 ANGLE
35 F5398895426400 1 BRACKET
36 D9249171620200 2 BRACKET
37 NAS6703-3 2 BOLT
38 NAS1149C0363R 1 WASHER
39 NSA5067-08-1 2 NUT
40 MS21047L3 2 NUT
41 NAS1149D0332K 4 WASHER
42 MS21043-3 2 NUT
43 EN6081D5-06 4 RIVET
44 EN6081D5-07 8 RIVET
45 EN6081AD4-08 6 RIVET
46 EN6101AD3-03 4 RIVET
91 F9249016920000 1 PLATE
92 F9249016920200 1 PLATE
97 EN2997KE3C10 1 CAP
127 EN3155-018M1616 1 PIN
E0397FY2000 1 CONTACT
F9297001300900 1 ELECEQPT
F9297001400500 1 ELECEQPT
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
CONF 002-005
Part kit 274213D02R01
Cost 17500.00 USD
Availability 240 d (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead time for ordering purposes shall be
obtained through the AIRBUS Spares portal or through a request for quotation to
airbus.kit@airbus.com.

### Page 34

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 34
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.
Procurement address D4296
AIRBUS
Material, Logistics and Suppliers ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
Phone: +49 40 743 51616
E-mail: airbus.kit@airbus.com
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 NAS1801-3-9 7 SCREW
2 NAS1801-3-21 10 SCREW
4 NAS1101-04-6 1 SCREW
5 NAS1101-04-7 9 SCREW
6 NAS1291C3M 16 NUT
7 MS21042-04 10 NUT
8 NSA5066-3-1 3 NUT
9 NSA5067-3-1 1 NUT
10 NSA935808C01 20 WASHER
11 NAS1149C0332R 21 WASHER
13 NAS1149CN432R 10 WASHER
15 AS21919WCH08 3 CLAMP
16 AS21919WCH09 2 CLAMP
17 AS21919WCH10 3 CLAMP
18 AS21919WCH12 2 CLAMP
20 NSA5527-03-08 2 SPACER
21 NSA5527-03-08D 10 SPACER
22 F9297582000000 1 HARNESS
23 EN2997KE508 1 CONNECTR
24 EN2997KE510 1 CONNECTR
25 ABS0805-09 10 CLAMP
26 ABS0805-10 6 CLAMP
27 ABS0805-11 1 CLAMP
28 ABS0805-12 3 CLAMP
29 ABS0805-13 6 CLAMP
30 ABS0805-15 1 CLAMP
32 F5398895426000 1 BRACKET
33 F5398895426200 1 BRACKET

### Page 35

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 35
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
34 D5357068121400 1 ANGLE
44 EN6081D5-07 8 RIVET
91 F9249016920000 1 PLATE
92 F9249016920200 1 PLATE
93 NAS1801-3-10 3 SCREW
94 NAS1801-3-12 2 SCREW
95 NAS1801-3-19 6 SCREW
96 NAS1801-3-28 2 SCREW
97 EN2997KE3C10 1 CAP
99 NSA5527-03-02D 4 SPACER
100 NSA5527-03-03D 4 SPACER
103 ABS0805-07 3 CLAMP
104 ABS0805-08 1 CLAMP
127 EN3155-018M1616 1 PIN
E0397FY2000 1 CONTACT
F9297001301000 1 ELECEQPT
F9297001400600 1 ELECEQPT
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
CONF 002
Part kit 274213D03R00
Cost 600.00 USD
Availability 240 d (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead time for ordering purposes shall be
obtained through the AIRBUS Spares portal or through a request for quotation to
airbus.kit@airbus.com.
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.
Procurement address D4296
AIRBUS
Material, Logistics and Suppliers ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
Phone: +49 40 743 51616
E-mail: airbus.kit@airbus.com
Internet: http://spares.airbus.com
NOTE(S)

### Page 36

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 36
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
40 MS21047L3 1 NUT
105 F5398895427400 1 BRACKET
106 F5397083300000 1 SECTION
107 D9249171620000 1 BRACKET
108 EN6081AD4-06 5 RIVET
109 EN6081AD4-07 3 RIVET
110 EN6101AD3-04 2 RIVET
111 DAN7-6-7X 2 PIN
112 DAN12-6X 2 COLLAR
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
CONF 003
Part kit 274213D04R00
Cost 770.00 USD
Availability 240 d (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead time for ordering purposes shall be
obtained through the AIRBUS Spares portal or through a request for quotation to
airbus.kit@airbus.com.
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.
Procurement address D4296
AIRBUS
Material, Logistics and Suppliers ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
Phone: +49 40 743 51616
E-mail: airbus.kit@airbus.com
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
40 MS21047L3 1 NUT
105 F5398895427400 1 BRACKET
106 F5397083300000 2 SECTION

### Page 37

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 37
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
107 D9249171620000 1 BRACKET
108 EN6081AD4-06 7 RIVET
109 EN6081AD4-07 3 RIVET
110 EN6101AD3-04 2 RIVET
111 DAN7-6-7X 2 PIN
112 DAN12-6X 2 COLLAR
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
CONF 004
Part kit 274213D05R00
Cost 600.00 USD
Availability 240 d (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead time for ordering purposes shall be
obtained through the AIRBUS Spares portal or through a request for quotation to
airbus.kit@airbus.com.
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.
Procurement address D4296
AIRBUS
Material, Logistics and Suppliers ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
Phone: +49 40 743 51616
E-mail: airbus.kit@airbus.com
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
40 MS21047L3 1 NUT
106 F5397083300000 1 SECTION
107 D9249171620000 1 BRACKET
108 EN6081AD4-06 5 RIVET
109 EN6081AD4-07 4 RIVET
110 EN6101AD3-04 2 RIVET

### Page 38

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 38
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
113 F5398895427600 1 BRACKET
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
CONF 005
Part kit 274213D06R00
Cost 600.00 USD
Availability 280 d (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead time for ordering purposes shall be
obtained through the AIRBUS Spares portal or through a request for quotation to
airbus.kit@airbus.com.
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.
Procurement address D4296
AIRBUS
Material, Logistics and Suppliers ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
Phone: +49 40 743 51616
E-mail: airbus.kit@airbus.com
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
106 F5397083300000 1 SECTION
107 D9249171620000 1 BRACKET
108 EN6081AD4-06 5 RIVET
109 EN6081AD4-07 4 RIVET
110 EN6101AD3-04 2 RIVET
113 F5398895427600 1 BRACKET
131 MS21051L3 1 NUT
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.

### Page 39

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 39
CONF ALL
Part kit 274213D07R01
Cost 380.00 USD
Availability 180 d (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead time for ordering purposes shall be
obtained through the AIRBUS Spares portal or through a request for quotation to
airbus.kit@airbus.com.
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.
Procurement address D4296
AIRBUS
Material, Logistics and Suppliers ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
Phone: +49 40 743 51616
E-mail: airbus.kit@airbus.com
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
84 NSA939526-03C 1 SHUNT
85 G9297006500400 1 EQUIPMNT
86 ABS0772A01A 1 CLIP
87 NSA931320-030 1 CB
89 NAS1100-06-10 4 SCREW
90 NAS1149CN616R 4 WASHER
F9237000703600 1 PLCRDSET
F9237000704000 1 PLCRDSET
F9237000704200 1 PLCRDSET
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
CONF 001
Components for task set A340-A-27-XX-4213-01000-93AA-A Modification of the
Wiring for LSD
Procurement address D4296
AIRBUS Material, Logistics and Suppliers
Customer Order Fulfilment
Weg beim Jaeger 150
22335 HAMBURG
GERMANY

### Page 40

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 40
Phone: +49 (0) 40 50 76 40 02
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
F9100095127395
(D4296) 1 PLCRDSET (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): This item has a Shelf Life of less than or equal to 24 months and must be ordered
when you intend to accomplish the Service Bulletin.
CONF 002
Components for task set A340-A-27-XX-4213-01000-93AA-A Modification of the
Wiring for LSD
Procurement address D4296
AIRBUS Material, Logistics and Suppliers
Customer Order Fulfilment
Weg beim Jaeger 150
22335 HAMBURG
GERMANY
Phone: +49 (0) 40 50 76 40 02
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
F9100095127395
(D4296) 1 PLCRDSET (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): This item has a Shelf Life of less than or equal to 24 months and must be ordered
when you intend to accomplish the Service Bulletin.
CONF 003
Components for task set A340-A-27-XX-4213-01000-93AA-A Modification of the
Wiring for LSD
Procurement address D4296
AIRBUS Material, Logistics and Suppliers
Customer Order Fulfilment
Weg beim Jaeger 150
22335 HAMBURG

### Page 41

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 41
GERMANY
Phone: +49 (0) 40 50 76 40 02
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
F9100095127395
(D4296) 1 PLCRDSET (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): This item has a Shelf Life of less than or equal to 24 months and must be ordered
when you intend to accomplish the Service Bulletin.
CONF 004
Components for task set A340-A-27-XX-4213-01000-93AA-A Modification of the
Wiring for LSD
Procurement address D4296
AIRBUS Material, Logistics and Suppliers
Customer Order Fulfilment
Weg beim Jaeger 150
22335 HAMBURG
GERMANY
Phone: +49 (0) 40 50 76 40 02
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
F9100095127395
(D4296) 1 PLCRDSET (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): This item has a Shelf Life of less than or equal to 24 months and must be ordered
when you intend to accomplish the Service Bulletin.
CONF 005
Components for task set A340-A-27-XX-4213-01000-93AA-A Modification of the
Wiring for LSD
Procurement address D4296
AIRBUS Material, Logistics and Suppliers
Customer Order Fulfilment
Weg beim Jaeger 150

### Page 42

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 42
22335 HAMBURG
GERMANY
Phone: +49 (0) 40 50 76 40 02
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
F9100095127395
(D4296) 1 PLCRDSET (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): This item has a Shelf Life of less than or equal to 24 months and must be ordered
when you intend to accomplish the Service Bulletin.
CONF ALL
E. LIST OF EXISTING PARTS
CONF 001
Re-identified parts for task set A340-A-27-XX-4213-01000-93AA-A Modification of
the Wiring for LSD
ITEM NEW PART No. KEYWORD ITEM OLD PART No. SEE NOTES
199 F9259001300800 PANEL (199) F9259001300600
199 F9259001301000 PANEL (199) F9259001300400
CONF 002
Re-identified parts for task set A340-A-27-XX-4213-01000-93AA-A Modification of
the Wiring for LSD
ITEM NEW PART No. KEYWORD ITEM OLD PART No. SEE NOTES
199 F9259001300800 PANEL (199) F9259001300600
199 F9259001301000 PANEL (199) F9259001300400
CONF 003
Re-identified parts for task set A340-A-27-XX-4213-01000-93AA-A Modification of
the Wiring for LSD
ITEM NEW PART No. KEYWORD ITEM OLD PART No. SEE NOTES
199 F9259001300800 PANEL (199) F9259001300600
199 F9259001301000 PANEL (199) F9259001300400
CONF 004
Re-identified parts for task set A340-A-27-XX-4213-01000-93AA-A Modification of
the Wiring for LSD
ITEM NEW PART No. KEYWORD ITEM OLD PART No. SEE NOTES
199 F9259001300800 PANEL (199) F9259001300600

### Page 43

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 43
ITEM NEW PART No. KEYWORD ITEM OLD PART No. SEE NOTES
199 F9259001301000 PANEL (199) F9259001300400
CONF 005
Re-identified parts for task set A340-A-27-XX-4213-01000-93AA-A Modification of
the Wiring for LSD
ITEM NEW PART No. KEYWORD ITEM OLD PART No. SEE NOTES
199 F9259001300800 PANEL (199) F9259001300600
199 F9259001301000 PANEL (199) F9259001300400

### Page 44

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 44
CONF ALL
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A340-A-27-XX-4213-01000-93AA-A (A340-A-27-XX-4213-01ZZZ-93AZ-A)
Modification of the Wiring for LSD
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
WARNING: MAKE SURE THAT THE SAFETY DEVICES AND THE WARNING NOTICES ARE IN
POSITION BEFORE YOU START A TASK ON OR NEAR:
- THE FLIGHT CONTROLS
- THE FLIGHT CONTROL SURFACES
- THE LANDING GEAR AND RELATED DOORS
- OTHER COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS
AND/OR DAMAGE TO THE EQUIPMENT.
WARNING: MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE
CLEAR.
MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR
DAMAGE.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO A MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESPM 20-55-00.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.

### Page 45

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 45
NOTE: This Service Bulletin is classified mandatory or expected to be classified mandatory by
an Airworthiness Directive (AD). The paragraphs 3.C. and 3.E. in these accomplishment
instructions are Required for Compliance (RC) and must be done to comply with the AD.
T o allow more flexibility, the rule "refer to" and "in accordance with" will apply to these
paragraphs 3.C. and 3.E. Other paragraphs are recommended and may be deviated from,
done as part of other actions or done with accepted methods different from those given
in the Service Bulletin, as long as the RC paragraphs can be done and the aircraft can be
put back into a serviceable condition.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including Required for Compliance paragraph
contained herein, contact AIRBUS for further instructions and approval.
NOTE: Discarded parts must be managed at the operator's discretion.
A. TASK SET ASSOCIATED INFORMATION
Task Manpower
CONF 001
TOTAL MAN-HOURS 54.00 h
CONF 002
TOTAL MAN-HOURS 54.00 h
CONF 003
TOTAL MAN-HOURS 54.00 h
CONF 004
TOTAL MAN-HOURS 54.00 h
CONF 005
TOTAL MAN-HOURS 54.00 h
CONF 001
ELAPSED TIME (HOURS) 54.00 h
CONF 002
ELAPSED TIME (HOURS) 54.00 h
CONF 003
ELAPSED TIME (HOURS) 54.00 h
CONF 004
ELAPSED TIME (HOURS) 54.00 h
CONF 005
ELAPSED TIME (HOURS) 54.00 h
CONF ALL
B. PREPARATION
(1) Task A340-A-27-XX-4213-01001-540A-A (A340-A-27-XX-4213-01ZZZ-540Z-A)
Job Set-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Referenced Information
Manuals/Drawings References/Sheets
AMM T ask 12-34-24-860-802T ask 25-53-00-000-801

### Page 46

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 46
Manuals/Drawings References/Sheets
T ask 25-54-00-000-801
52-41-00, Page Block 001
Procedure
NOTE: For the basic Aircraft configuration, refer to AMM Chapter “Introduction -
Aircraft status for maintenance" in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to Ref. AMM T ask 12-34-
24-860-802.
(b) Remove the AFT cargo ceiling panels (Panel 151FC, Panel 151HC, Panel 151KC
and Panel 151PC) from the AFT cargo compartment, refer to Ref. AMM T ask 25-
53-00-000-801.
(c) Remove the ceiling panels (Panel 161DC, Panel 161EC and Panel 162FC) from
the bulk-cargo compartment, refer to Ref. AMM T ask 25-54-00-000-801.
(d) Remove the sidewall (Panel 162RW and Panel 162KW), from the bulk-cargo
compartment, refer to Ref. AMM T ask 25-54-00-000-801.
(e) Open the maintenance Door 312AR, refer to Ref. AMM 52-41-00, Page Block 001.
(2) Task A340-A-27-XX-4213-02001-540A-A (A340-A-27-XX-4213-02ZZZ-540Z-A)
Aircraft System Configuration
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Procedure
(a) In the cockpit, on the ELEC section of the Electrical Panel 235VU, make sure that
these pushbutton switches are released:
- BAT1, BAT2, APU BAT
- GEN1, 2, 3, 4, APU GEN
- EXT A (B).
(b) Open, safety/lock and tag this (these) circuit breaker(s):
PANEL DESIGNATION FIN LOCATION SEE NOTES
701PP 10PB1 (1) (2)
702PP 10PB2 (1) (3)
NOTE(S)
(1): For circuit breaker safety practices, refer to Ref. AMM T ask 20-16-00-912-801.
(2): The circuit breaker FIN 10PB1 is located on panel 742VU at position 72S.
(3): The circuit breaker FIN 10PB2 is located on panel 742VU at position 71S.
(c) Put the warning notices in position in the cockpit to tell persons not to operate
the pushbutton switches on the overhead panels:
- 211VU (EMER ELEC PWR)
- 235VU (ELEC).

### Page 47

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 47
(d) Put the warning notices in position in the cockpit to tell persons not to start the
Auxiliary Power Unit (APU).
(e) Make sure that the external connector(s) is (are) not connected to the aircraft
receptacle(s) EXT PWR A (B).
(f) Put the warning notices in position at the Door 121EL to tell persons not to
connect the external power connector(s).
C. PROCEDURE
CONF 001
(1) Task A340-A-27-XX-4213-01001-510A-A (A340-A-27-XX-4213-01ZZZ-510Z-A)
Cut the Wire 2499-5020 in the Electrical Harness 5871VB
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
310 Work location From Frame 85 to Frame 86
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Electrical
Referenced Information
Manuals/Drawings References/Sheets
AMM 06-20-00, Page Block 00106-31-53, Page Block 001
Procedure
(a) Standard Practices given in this procedure:
1 For the Frame (FR) identification, refer to Ref. AMM 06-31-53, Page Block
001.
2 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
(b) At the FR86, cut the wire 2499–5020 close to the beginning of the lightning
protection hose, refer to Ref. Fig. Cut the Wire 2499-5020 in the Electrical
Harness 5871VB and refer to Ref. Fig. Hook-up Chart of the Modification of the
Wiring in Electrical Harness 5871VB.

### Page 48

A340
SERVICE BULLETIN
Figure ICN-A340-A-27XX4213-A-FAPE3-019VS-A-003-01 SHEET 1/3
REV 00 Oct 12/20 A340-27-4213Cut the Wire 2499-5020 in the Electrical Harness 5871VB
Page 48
CONF 001
FR87
FR86
FR85
FR84
FR83
FR80
FR91
/82
5871VB /1M
A
A
Z310
B C
ICN-A340-A-27XX4213-A-FAPE3-019VS-A-003-01

### Page 49

A340
SERVICE BULLETIN
Figure ICN-A340-A-27XX4213-A-FAPE3-019VT-A-001-01 SHEET 2/3
REV 00 Oct 12/20 A340-27-4213Cut the Wire 2499-5020 in the Electrical Harness 5871VB
Page 49
CONF 001
TO
TO
FR87
FR86
5871VB /1M
5123VC
5205VP
FR85
B
ICN-A340-A-27XX4213-A-FAPE3-019VT-A-001-01

### Page 50

A340
SERVICE BULLETIN
Figure ICN-A340-A-27XX4213-A-FAPE3-019VU-A-001-01 SHEET 3/3
REV 00 Oct 12/20 A340-27-4213Cut the Wire 2499-5020 in the Electrical Harness 5871VB
Page 50
CONF 001
FR86
FR85
5213VT
5871VB /1MCUT POSITION
OF THE WIRE
2499-5020
C
TO
5205VP
TO
5123VC
LIGHTNING
PROTECTION HOSE
ICN-A340-A-27XX4213-A-FAPE3-019VU-A-001-01

### Page 51

A340
SERVICE BULLETIN
Figure ICN-A340-A-27XX4213-A-FAPE3-01A7O-A-001-01 SHEET 1/1
REV 00 Oct 12/20 A340-27-4213Hook-up Chart of the Modification of the Wiring in Electrical Harness 5871VB
Page 51
CONF 001
ELT.EQUIPMENT F929 70012 003 00 "SHEET 07,ISSUE C" A = ADDED WIRE
BEFORE151 3671VC 16 2499-5020 1M CF20 5123VC311 G-EN3155-014M2018 EN3155-019F2018261001027,6
311 - - NSA936603CC01002499-5020 1M CF20  5000 196,9311 5123VC G EN3155-019F2018 AFTER-
D = DELETED WIRE
L
I
N
E ZONE ORPANEL TERM. TERMINAL P/N WIREIDENT C0L ROUTE GAUGE MM INCH ZONE ORPANEL ELEC.IDENT TERM. TERMINAL P/N
INSTRUCTIONS
END 2LEADEND 1
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1
2
3
4
5
6
7
8
9
ELEC.
IDENT.
LENGTH

### Page 52

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 52
CONF 002-005
(1) Task A340-A-27-XX-4213-01002-510A-A (A340-A-27-XX-4213-01ZZZ-510Z-A)
Cut the Wire 2499-5020 in the Electrical Harness 5871VB
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
310 Work location From Frame 85 to Frame 86
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Electrical
Referenced Information
Manuals/Drawings References/Sheets
AMM 06-20-00, Page Block 00106-31-53, Page Block 001
Procedure
(a) Standard Practices given in this procedure:
1 For the Frame (FR) identification, refer to Ref. AMM 06-31-53, Page Block
001.
2 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
(b) At the FR86, cut the wire 2499–5020 close to the beginning of the lightning
protection hose, refer to Ref. Fig. Cut the Wire 2499-5020 in the Electrical
Harness 5871VB and refer to Ref. Fig. Hook-up Chart of the Modification of the
Wiring in Electrical Harness 5871VB.
.

### Page 53

A340
SERVICE BULLETIN
Figure ICN-A340-A-27XX4213-A-FAPE3-01A09-A-001-01 SHEET 1/3
REV 00 Oct 12/20 A340-27-4213Cut the Wire 2499-5020 in the Electrical Harness 5871VB
Page 53
CONF 002-005
FR87
FR86
FR85
FR84
FR83
FR80
FR91
/82
5871VB /1M
A
B C
A
Z310
ICN-A340-A-27XX4213-A-FAPE3-01A09-A-001-01

### Page 54

A340
SERVICE BULLETIN
Figure ICN-A340-A-27XX4213-A-FAPE3-01A0A-A-001-01 SHEET 2/3
REV 00 Oct 12/20 A340-27-4213Cut the Wire 2499-5020 in the Electrical Harness 5871VB
Page 54
CONF 002-005
TO
FR87
FR86
5205VP
FR85
B
5871VB /1M
5123VC
TO
ICN-A340-A-27XX4213-A-FAPE3-01A0A-A-001-01

### Page 55

A340
SERVICE BULLETIN
Figure ICN-A340-A-27XX4213-A-FAPE3-01A0B-A-002-01 SHEET 3/3
REV 00 Oct 12/20 A340-27-4213Cut the Wire 2499-5020 in the Electrical Harness 5871VB
Page 55
CONF 002-005
FR86
FR85
5205VP
TO
TO
5123VC
CUT POSITION
OF THE WIRE
2499-5020
C
5213VT
LIGHTNING
PROTECTION HOSE
5871VB /1M
ICN-A340-A-27XX4213-A-FAPE3-01A0B-A-002-01

### Page 56

A340
SERVICE BULLETIN
Figure ICN-A340-A-27XX4213-A-FAPE3-01A7O-A-001-01 SHEET 1/1
REV 00 Oct 12/20 A340-27-4213Hook-up Chart of the Modification of the Wiring in Electrical Harness 5871VB
Page 56
CONF 002-005
ELT.EQUIPMENT F929 70012 003 00 "SHEET 07,ISSUE C" A = ADDED WIRE
BEFORE151 3671VC 16 2499-5020 1M CF20 5123VC311 G-EN3155-014M2018 EN3155-019F2018261001027,6
311 - - NSA936603CC01002499-5020 1M CF20  5000 196,9311 5123VC G EN3155-019F2018 AFTER-
D = DELETED WIRE
L
I
N
E ZONE ORPANEL TERM. TERMINAL P/N WIREIDENT C0L ROUTE GAUGE MM INCH ZONE ORPANEL ELEC.IDENT TERM. TERMINAL P/N
INSTRUCTIONS
END 2LEADEND 1
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1
2
3
4
5
6
7
8
9
ELEC.
IDENT.
LENGTH

### Page 57

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 57
CONF 001
(2) Task A340-A-27-XX-4213-01001-520A-A (A340-A-27-XX-4213-01ZZZ-520Z-A)
Remove the Electrical Harness 5869VB from the Traverse Structure between
FR86 and FR87
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
310 Work location From Frame 86 to Frame 87
Manpower/Resources/Skills
Man-hours 2.00 h
Minimum Number of person 1
Elapsed Time 2.00 h
Skills Electrical
Referenced Information
Manuals/Drawings References/Sheets
AMM
06-20-00, Page Block 001
06-31-53, Page Block 001
T ask 20-28-00-912-810
ESPM 20-51-20
SRM 51-42-00
Procedure
(a) Standard Practices given in this procedure:
1 For the Frame (FR) identification, refer to Ref. AMM 06-31-53, Page Block
001.
2 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
3 Remove and install fasteners in accordance with Ref. SRM 51-42-00.
4 T ag all the parts you must remove and retain to make the subsequent
installation easier.
5 For the electrical bonding, refer to Ref. ESPM 20-51-20 and Ref. AMM T ask
20-28-00-912-810.
(b) Remove the electrical harness 5869VB from the structure between Frame 86
and Frame 87, refer to Ref. Fig. Remove the Electrical Harness 5869VB from the
Structure between FR86 and FR87.
1 Remove as shown on view D:
4 CLAMP   Item (29) Discard
1 CLAMP   Item (153) Discard
2 CLAMP   Item (19) Discard
2 CLAMP   Item (104) Discard
attached with:
4 SCREW HEXAGON-HEAD   Item (158) Discard

### Page 58

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 58
3 SCREW HEXAGON-HEAD   Item (160) Discard
4 WASHER   Item (159) Discard
3 WASHER   Item (11) Discard
4 SPACER   Item (100) Discard
2 NUT   Item (6) Discard
1 NUT-CLIP SELF LOCKIN   Item (8) Discard
2 NUT-CLIP   Item (9) Discard
1 NUT SELF LOCKIN   Item (165) Discard
2 At the grounding point 5287VN as shown on view D, disconnect:
1 BONDING CABLE      
attached with:
1 SCREW HEXAGON-HEAD   Item (160) Discard
1 NUT   Item (6) Discard
1 WASHER   Item (11) Discard
3 Remove as shown on view E:
2 CLAMP   Item (16) Discard
3 CLAMP   Item (104) Discard
attached with:
4 SCREW HEXAGON-HEAD   Item (158) Discard
3 WASHER   Item (159) Discard
1 WASHER   Item (11) Discard
2 SPACER   Item (100) Discard
2 SPACER   Item (20) Discard
1 NUT   Item (6) Discard
4 Remove as shown on view F:
2 CLAMP   Item (19) Discard
attached with:
1 SCREW HEXAGON-HEAD   Item (160) Discard
1 WASHER   Item (11) Discard
1 NUT   Item (6) Discard
5 Remove as shown on view G:
1 CLAMP   Item (19) Discard
attached with:
1 SCREW HEXAGON-HEAD   Item (160) Discard
1 WASHER   Item (11) Discard

### Page 59

A340
SERVICE BULLETIN
REV 00 Oct 12/20 A340-27-4213
Page 59
1 NUT   Item (8) Discard
6 At FR86, remove as shown on view H:
1 CLAMP   Item (28) Discard
1 BONDING-STRIP   Item (156) Discard
attached with:
1 SCREW HEXAGON-HEAD   Item (158) Discard
1 WASHER   Item (159) Discard
1 SPACER   Item (100) Discard
1 NUT   Item (6) Discard
7 Remove as shown on view J:
1 CLAMP   Item (16) Discard
attached with:
1 SCREW HEXAGON-HEAD   Item (160) Discard
1 WASHER   Item (11) Discard
1 NUT   Item (8) Discard

### Page 60

A340
SERVICE BULLETIN
Figure ICN-A340-A-27XX4213-A-FAPE3-019X5-A-001-01 SHEET 1/6
REV 00 Oct 12/20 A340-27-4213Remove the Electrical Harness 5869VB
from the Structure between FR86 and FR87 Page 60
CONF 001
FR87
FR86
FR85
FR84
FR83
FR80
FR91
/82
B C
5869VB /1MF
A
A
Z310
ICN-A340-A-27XX4213-A-FAPE3-019X5-A-001-01

The text continues at https://openairdocs.org/service-documents/airbus/a340-27-4213/file/20657ff03c33.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
