# Airbus Service Bulletin A340-27-5062

Copy: No revision named ("A340-27-5062 R00"), 30 pages: PDF https://openairdocs.org/files/sha256/b6/23/b6233cd79515ea043934ea8694e1b0d9a11b394a48db20f8dbd85f7cbe2a22f5; text https://openairdocs.org/service-documents/airbus/a340-27-5062/file/b6233cd79515.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2014-0006; AD 2016-10-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A340-27-5062
- Page: https://openairdocs.org/service-documents/airbus/a340-27-5062

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2016-10-08](https://openairdocs.org/ad/2016-10-08.md), effective Jun 24, 2016: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a340-27-5062/proposed.md).

## Text (30 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2014-0006; AD 2016-10-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A340-500/600
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 27
TITLE: FLIGHT CONTROLS - TRIMMABLE HORIZONTAL STABILIZER
ACTUATOR - CHECK P/N AND SCHEDULE NEXT NBB DISKS
REPLACEMENT
**CONF ALL
MODIFICATIONS
None
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
During endurance qualification tests on other AIRBUS program Trimmable Horizontal Stabiliser Actuator
(THSA), a partial loss of No-Back Brake (NBB) efficiency was identified. Due to similarity of design,
same tests were done on THSA fitted on LR AIRBUS aircraft (A330 and A340).
During these tests, the partial loss of NBB efficiency was confirmed on THSA 47175 family. The partial
loss of the NBB efficiency could lead, in case the hydraulic motors cannot keep the ball screw in its last
commanded position, to an uncommanded movement of the Trimmable Horizontal Stabiliser (THS)
under specific aerodynamic loads.
The partial loss of NBB efficiency was identified to be due to auto-contamination of the NBB carbon
disks (polishing effect that reduces the friction coefficient).
The phenomenon of polishing and auto-contamination of the carbon friction disks is confirmed to be
an ageing/endurance issue. A new hard limit of the NBB carbon disks leading to THSA periodic
maintenance is set to 3500 flight cycles.
Today the THSA’s installed on aircraft are fitte d with their original NB B disks, consequently, the
cumulated FC of the NBB disks corresponds to the cumulated FC of the THSA. THSA NBB disks have
to be replaced before 3500 FC, however some THSA have already accumulated more than 3500 FC.
This Inspection Service Bulletin requires to check the P/N of THSA, and depending on the P/N installed:
- For aircraft with P/N 47175-530, to apply ALS part 4,
- For aircraft with P/N 47175-200/300/500/520, to schedule the next replacement of the NBB disks
on THSA that have more than 3500 FC with associated grace periods.
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A340-500/600
SERVICE BULLETIN
SUMMARY
After installation of serviceable THSA, operator must repeat the inspection.
Accomplishment of this Service Bulletin permits scheduling the next THSA maintenance for NBB disks
replacement.
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 LROPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 NO
NOTE
 (1)
: Service Bulletin must be accomplished.
MATERIAL PRICE INFORMATION
No Material
EFFECTIVITY
This Service Bulletin is applicable to this (these) operator(s) :
06U 25R 36V 70U 72W AHY AIB CES CHH DLH ETD HFM HFY
I2L IBE QAF QTR SAA TAM THA UAE VIR
CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU
 27.44.00.013
OEB
 None
AOT
 A27L004-13
SIL
 None
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 None
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 YES
HARD
 NO
SOFT
 NO
OBRM
 NO
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A340-500/600
SERVICE BULLETIN
SUMMARY
MANPOWER
Task 275062-832-801-001: Inspection
TOTAL MANHOURS
 2.50
ELAPSED TIME (HOURS)
 2.50
Task 275062-833-801-001: Repair
TOTAL MANHOURS
 22.50
ELAPSED TIME (HOURS)
 11.50
APPENDICES
None
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A340-500/600
SERVICE BULLETIN
SUMMARY
**CONF ALL
FR87
FR80
B
B
312AR
A
THSA TO BE INSPECTED
 − Z311 Z312
A
1CS
F_SB_275062_5_SAAA_01_01
Figure A-F SAAA - S heet 01
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A340-500/600
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 27
TITLE: FLIGHT CONTROLS - TRIMMABLE HORIZONTAL STABILIZER
ACTUATOR - CHECK P/N AND SCHEDULE NEXT NBB DISKS
REPLACEMENT
MODIFICATION No.: None
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
NOTE
: This Service Bulletin is only applicable to THSA P/N 47175-200, P/N
47175-300, P/N 47175-500 and P/N 47175-520.
(1) Models
340-541 340-542 340-642
(2) Effectivity by MSN
0371 0376 0383 0391 0394 0410 0416-0417 0426 0431 0436 0440 0445 0449 0453
0457 0460 0464 0468 0471 0475 0478 0482 0485 0488 0492 0495 0499 0514 0517
0520 0523 0531 0534 0537 0540 0543 0547 0557 0560 0563 0566 0569 0572 0575
0577 0580 0583 0586 0601 0604 0606 0608 0611 0615 0617 0619 0622 0624 0626
0628 0630 0639 0672 0677 0681 0685 0689 0694 0698 0702 0706 0710 0715 0719
0723 0727 0736 0740 0744 0748 0753 0757 0761-0768 0771 0775 0779 0783 0787
0790 0794 0798 0804 0812 0829 0837 0846 0848 0870 0886 0894 0897 0902 0910
0912 0917 0924 0929 0933 0953 0960 0972 0981 0987 0993 1005 1017 1030 1040
1079 1091 1102 1122
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A340-500/600
SERVICE BULLETIN
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
06U
 1091 1102
25R
 0924
36V
 0391 0416
70U
 0902
72W
 0917
AHY
 0779 0886 0894
AIB
 0371 0376 0478 0492 0499 0560 0563
CES
 0468 0488 0514 0577 0586
CHH
 0436 0453
DLH
 0482 0517 0523 0537 0540 0543 0566 0569 0580 0583 0762 0763
0767 0771 0790 0794 0812 0846 0848 0897 0972 0981 0987 1005
ETD
 0748 0757 0761 0783 0829 0837 0870 0929 0933 1030 1040
HFM
 0383
HFY
 0910 0912
I2L
 0475
IBE
 0431 0440 0460 0601 0604 0606 0617 0619 0672 0702 0727 0744
0960 0993 1017 1079 1122
QAF
 0495
QTR
 0715 0740 0766 0798
SAA
 0410 0417 0426 0531 0534 0547 0557 0626 0630
TAM
 0445 0464
THA
 0624 0628 0677 0681 0689 0698 0710 0719 0775 0953
UAE
 0394 0457 0471 0485 0520 0572 0608 0611 0685 0694
VIR
 0449 0575 0615 0622 0639 0706 0723 0736 0753 0764 0765 0768
0787 0804
(4) Configuration by MSN
MSN
 CONFIGURATION
0371 0376 0383 0391 0394 0410 0416 0417 0426 0431 0436
0440 0445 0449 0453 0457 0460 0464 0468 0471 0475 0478
0482 0485 0488 0492 0495 0499 0514 0517 0520 0523 0531
0534 0537 0540 0543 0547 0557 0560 0563 0566 0569 0572
0575 0577 0580 0583 0586 0601 0604 0606 0608 0611 0615
0617 0619 0622 0624 0626 0628 0630 0639 0672 0677 0681
0685 0689 0694 0698 0702 0706 0710 0715 0719 0723 0727
0736 0740 0744 0748 0753 0757 0761 0762 0763 0764 0765
0766 0767 0768 0771 0775 0779 0783 0787 0790 0794 0798
0804 0812 0829 0837 0846 0848 0870 0886 0894 0897 0902
0910 0912 0917 0924 0929 0933 0953 0960 0972 0981 0987
0993 1005 1017 1030 1040 1079 1091 1102 1122
001
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A340-500/600
SERVICE BULLETIN
(5) Configuration definition
**CONF 001
Config. 001 is valid for all the aircraft given in the effectivity of this Service Bulletin as a
standard configuration.
(6) Material Effectivity
No Material Set
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
During endurance qualification tests on other AIRBUS program Trimmable Horizontal
Stabiliser Actuator (THSA), a partial loss of No-Back Brake (NBB) efficiency was
identified. Due to similarity of design, same tests were done on THSA fitted on LR
AIRBUS aircraft (A330 and A340).
During these tests, the partial loss of NBB efficiency was confirmed on THSA 47175
family. The partial loss of the NBB efficiency could lead, in case the hydraulic motors
cannot keep the ball screw in its last commanded position, to an uncommanded
movement of the Trimmable Horizontal Stabiliser (THS) under specific aerodynamic
loads.
The partial loss of NBB efficiency was identified to be due to auto-contamination of the
NBB carbon disks (polishing effect that reduces the friction coefficient).
The phenomenon of polishing and auto-contamination of the carbon friction disks is
confirmed to be an ageing/endurance issue. A new hard limit of the NBB carbon disks
leading to THSA periodic maint enance is set to 3500 flight cycles.
Today the THSA’s installed on aircraft are fitted with their original NBB disks,
consequently, the cumulated FC of the NBB disks corresponds to the cumulated FC of
the THSA. THSA NBB disks have to be replaced before 3500 FC, however some THSA
have already accumulated more than 3500 FC.
(2) Objective/Action
This Inspection Service Bulletin requires to check the P/N of THSA, and depending on
the P/N installed:
- For aircraft with P/N 47175-530, to apply ALS part 4,
- For aircraft with P/N 47175-200/300/500/520, to schedule the next replacement of
the NBB disks on THSA that have more than 3500 FC with associated grace
periods.
After installation of serviceable THSA, operator must repeat the inspection.
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A340-500/600
SERVICE BULLETIN
(3) Advantages
Accomplishment of this Service Bulletin permits scheduling the next THSA maintenance
for NBB disks replacement.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
Task 275062-832-801-001: Inspection
(1) Schedule THSA Maintenance (FIN 1CS)
Task 275062-833-801-001: Repair
(1) Install a Serviceable THSA
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA) will be issued
to confirm this classification. It is anticipated that the AD will confirm the thresholds
given but reference should be made to the AD for confirmation of the mandated
accomplishment timescale.
Table 1, Config. 001 - Inspection of the THSA P/N (FIN 1CS)
Compliance Time
Condition
 Action
Threshold
 Grace Period
Repetitive
interval
All Aircraft
 Do an inspection
of THSA P/N (FIN
1CS), in
accordance with
TASK
275062-832-801
001 Inspection
From Inspection
Service Bulletin
issuance
90 days
 None
P/N of the THSA is
47175-530
Apply ALS Part 4
 None
 None
 None
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A340-500/600
SERVICE BULLETIN
Table 1, Config. 001 - Inspection of the THSA P/N (FIN 1CS)
Compliance Time
Condition
 Action
Threshold
 Grace Period
Repetitive
interval
Schedule the next
THSA
maintenance for
NBB disks
replacement, in
accordance with
SUBTASK
275062-200-001
001 Schedule
THSA
Maintenance (FIN
1CS)
And
Replace the
THSA by a
Serviceable One,
in accordance
with TASK
275062-833-801
001 Repair
3500 FC
accumulated by
THSA from last
NBB disks
replacement
- From Oct 31/15,
operation of
THSA with NBB
disks having
accumulated more
than 6000 FC is
not allowed.
- From Apr 30/17,
operation of
THSA with NBB
disks having
accumulated more
than 5200 FC is
not allowed.
- From Apr 30/18,
operation of
THSA with NBB
disks having
accumulated more
than 4400 FC is
not allowed.
- From Apr 30/19,
operation of
THSA with NBB
disks having
accumulated more
than 3500 FC is
not allowed.
None
P/N of THSA is
47175-200 or
47175-300 or
47175-500 or
47175-520
Repeat the
inspection of the
THSA P/N, in
accordance with
TASK
275062-832-801
001 Inspection
None
 None
 At each THSA
installation
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approv al No. EASA. 21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 5
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A340-500/600
SERVICE BULLETIN
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
Task 275062-832-801-001: Inspection
Get Access
 1.00
On Aircraft
Schedule THSA Maintenance (FIN 1CS)
 0.50
Close-Up
 1.00
TOTAL MANHOURS
 2.50
ELAPSED TIME (HOURS)
 2.50
Task 275062-833-801-001: Repair
Get Access
 2.00
On Aircraft
Install a Serviceable THSA
 18.00
Tests
 0.50
Close-Up
 2.00
TOTAL MANHOURS
 22.50
ELAPSED TIME (HOURS)
 11.50
NOTE
: The minimum manhours necessary to accomplish this Service Bulletin are
those for the Inspection. Depending on the inspection result, additional
manhours can apply.
H. WEIGHT AND BALANCE
Not Changed
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
Airworthiness Limitation Section (ALS)
 Airworthiness Limitation Section
(ALS) Part 4
Aircraft Maintenance Manual (AMM)
 06-20-00 06-31-53 06-41-53
12-34-24 27-44-51 52-10-00
Elec. Std. Practices Manual (ESPM)
 20-55-00
K. PUBLICATION AFFECTED
None
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 6
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A340-500/600
SERVICE BULLETIN
L. INTERCHANGEABILITY/MIXABILITY
Not Applicable
M. SPARES
None
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 7
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A340-500/600
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 8
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A340-500/600
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
None
(2) Price and Availability
None
B. INDUSTRY SUPPORT INFORMATION
AIRBUS will not provide industry support for accomplishment of this Service Bulletin.
C. LIST OF COMPONENTS
No Kit
D. LIST OF MATERIALS - OPERATOR SUPPLIED
(1) Consumable Materials
None
(2) Components
NOTE
: To accomplish this Service Bulletin it is necessary to use the expendable
parts listed in the subsequent referenced AMM task:
- refer to AMM Task 27-44-51-400-801.
(3) Equipment
None
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
F. TOOLING
(1) Tooling - Price and Availability
None
(2) Tools
NOTE
: To accomplish this Service Bulletin it is necessary to use the tools listed
in the subsequent refe renced AMM tasks:
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 9
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A340-500/600
SERVICE BULLETIN
- AMM Task 27-44-51-000-801
- AMM Task 27-44-51-400-801
(3) Special Tools
None
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 10
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A340-500/600
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 275062-832-801-001 - Inspection
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC; AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
"refer to" are used and the operator has a procedure accepted by the local
authority he belongs to, the accepted alternative procedure can be used. When the
words "in accordance with" are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles are referred to by acronyms. Refer to paragraph 1.J., References, for
the definition of acronyms.
NOTE
: The purpose of flow charts is to supplement the information given in the Procedure
and Compliance paragraphs and not to serve as the primary source for tasks or
compliance times given in this Service Bulletin.
NOTE
: This Service Bulletin is mandated or expected to be mandated by an Airworthiness
Directive (AD). The paragraphs 3.C. and 3.D. in these accomplishment instructions
are Required for Compliance (RC) and must be done to comply with the AD. Other
paragraphs are recommended and may be deviated from, done as part of other
actions or done with accepted methods different from those given in the Service
Bulletin, as long as the RC paragraphs can be done and the aircraft can be put
back into a serviceable condition.
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 11
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A340-500/600
SERVICE BULLETIN
Task Associated Data
Zone
310
Access
Door
 312AR
Manpower
TOTAL MANHOURS
 2.50
ELAPSED TIME (HOURS)
 2.50
A. GENERAL
(1) Subtask 275062-910-001-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
(2) Subtask 275062-839-001-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
B. PREPARATION
(1) Subtask 275062-941-001-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-860-802
Task 52-10-00-010-801
NOTE
: There are two procedures for the THSA P/N identification:
- check the THSA P/N in the aircraft maintenance records,
- or check the THSA P/N on aircraft (if P/N is not known).
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 12
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A340-500/600
SERVICE BULLETIN
NOTE
: Do this preparation procedure, only if you Check the THSA P/N on
aircraft.
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear).
- Engine shut down, thrust reversers closed and locked.
- Aircraft in clean configuration.
- Parking brake applied.
- Aircraft electrical network de-energized.
- Hydraulic systems depressurized.
- Access to the cockpit and cabin is available.
- All circuit breakers are in closed position.
- All controls in NORM, AUTO or OFF position.
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Put an access platform in position at Zone 312.
(c) Open the access door 312AR.
(d) Put the warning notices in position in the flight compartment to tell persons not to
operate the pitch controls.
C. PROCEDURE
(1) Subtask 275062-200-001-001 - Schedule THSA Maintenance (FIN 1CS)
Work Zones and Access Panels
Zone
 Access/Work location
310
 Access
 Door 312AR
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Airworthiness Limitation Section (ALS)
 Airworthiness Limitation Section (ALS) Part
4
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 13
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A340-500/600
SERVICE BULLETIN
References
Fig. A-FFAAA
Flow Chart
Sheet 01
Fig. A-FBAAA
Area to be Inspected
Sheet 01
Fig. A-FRAAA
Inspection Report
Sheet 01
(a) At the threshold given in PLANNING INFORMATION paragraph E.(2):
Check the THSA P/N in maintenance records (no need of SUBTASK
275062-941-001 001 Job Set-up ):
Refer to Fig. A-FFAAA
Refer to Fig. A-FBAAA
1
 If P/N is known:
a
 If the P/N is 47175-530:
<1> Apply Airworthiness Limitation Section (ALS) Part 4
b
 If the P/N is 47175-200, 47175-300, 47175-500 or 47175-520:
<1> Schedule the next THSA maintenance for NBB disks replacement to
be compliant with the following requirements:
- From Oct 31/15, operation of THSA with NBB disks having
accumulated more than 6000 FC is not allowed.
- From Apr 30/17, operation of THSA with NBB disks having
accumulated more than 5200 FC is not allowed.
- From Apr 30/18, operation of THSA with NBB disks having
accumulated more than 4400 FC is not allowed.
- From Apr 30/19, operation of THSA with NBB disks having
accumulated more than 3500 FC is not allowed.
<2> Within the above compliance times, replace the THSA by a
serviceable one, in accordance with TASK 275062-833-801 001
Repair .
<3> Complete the inspection report, refer to Fig. A-FRAAA
<4> Repeat the inspection at the interval given in the PLANNING
INFORMATION paragraph 1 E.(2), in accordance with TASK
275062-832-801 001 Inspection .
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 14
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A340-500/600
SERVICE BULLETIN
2
 If P/N not known:
a
 Check the THSA P/N on aircraft (and proceed SUBTASK
275062-941-001 001 Job Set-up ).
<1> If the P/N is 47175-530:
<a> Apply Airworthiness Limitation Section (ALS) Part 4
<2> If the P/N is 47175-200, 47175-300, 47175-500 or 47175-520:
<a> Schedule the next THSA maintenance for NBB disks
replacement to be compliant with the following requirements:
- From Oct 31/15, operation of THSA with NBB disks having
accumulated more than 6000 FC is not allowed.
- From Apr 30/17, operation of THSA with NBB disks having
accumulated more than 5200 FC is not allowed.
- From Apr 30/18, operation of THSA with NBB disks having
accumulated more than 4400 FC is not allowed.
- From Apr 30/19, operation of THSA with NBB disks having
accumulated more than 3500 FC is not allowed.
<b> Within the above compliance times, replace the THSA by a
serviceable one, in accordance with TASK 275062-833-801
001 Repair .
<c> Complete the inspection report, refer to Fig. A-FRAAA
<d> Repeat the inspection at the interval given in the PLANNING
INFORMATION paragraph 1 E.(2), in accordance with TASK
275062-832-801 001 Inspection .
D. TEST
None
E. CLOSE-UP
(1) Subtask 275062-942-001-001 - Close-up
Manpower Resources
Skills
 NON SPECIFIC
NOTE
: If you intend to accomplish an associated Repair Task during the same
layover period, the subsequent Close-up procedure is not necessary.
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Close the access door 312AR.
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 15
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A340-500/600
SERVICE BULLETIN
(c) Remove the access platform(s).
(d) Restore the systems and the aircraft to normal operating condition.
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 16
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A340-500/600
SERVICE BULLETIN
Task 275062-833-801-001 - Repair
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC; AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
"refer to" are used and the operator has a procedure accepted by the local
authority he belongs to, the accepted alternative procedure can be used. When the
words "in accordance with" are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles are referred to by acronyms. Refer to paragraph 1.J., References, for
the definition of acronyms.
NOTE
: This Service Bulletin is mandated or expected to be mandated by an Airworthiness
Directive (AD). The paragraphs 3.C. and 3.D. in these accomplishment instructions
are Required for Compliance (RC) and must be done to comply with the AD. Other
paragraphs are recommended and may be deviated from, done as part of other
actions or done with accepted methods different from those given in the Service
Bulletin, as long as the RC paragraphs can be done and the aircraft can be put
back into a serviceable condition.
Task Associated Data
Zone
310
Modified FIN
1CS
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 17
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A340-500/600
SERVICE BULLETIN
Access
Door
 312AR
Manpower
TOTAL MANHOURS
 22.50
ELAPSED TIME (HOURS)
 11.50
A. GENERAL
(1) Subtask 275062-910-002-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
(2) Subtask 275062-839-002-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
B. PREPARATION
(1) Subtask 275062-941-002-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-860-802
Task 27-44-51-000-801
Task 52-10-00-010-801
NOTE
: If you intend to accomplish this Repair Task during the same layover
period as the associated Inspection, the subsequent Preparation
procedure is not necessary except the Job Set-up procedure as
specified in the removal of the THSA (FIN 1CS), refer to AMM Task
27-44-51-000-801.
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 18
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A340-500/600
SERVICE BULLETIN
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear).
- Engine shut down, thrust reversers closed and locked.
- Aircraft in clean configuration.
- Parking brake applied.
- Aircraft electrical network de-energized.
- Hydraulic systems depressurized.
- Access to the cockpit and cabin is available.
- All circuit breakers are in closed position.
- All controls in NORM, AUTO or OFF position.
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Put an access platform in position at Zone 312.
(c) Open the access door 312AR.
(d) Put the warning notices in position in the flight compartment to tell persons not to
operate the pitch controls.
(e) Do the Job Set-up procedure as specified in the removal of the THSA (FIN 1CS),
refer to AMM Task 27-44-51-000-801.
C. PROCEDURE
(1) Subtask 275062-900-001-001 - Install a Serviceable THSA
Work Zones and Access Panels
Zone
 Access/Work location
310
 Access
 Door 312AR
Manpower Resources
Manhours
 18.00
Minimum number of person
 2
Subtask elapsed time
 9.00
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 27-44-51-000-801
Task 27-44-51-400-801
(a) Remove the THSA:
Refer to AMM Task 27-44-51-000-801
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 19
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A340-500/600
SERVICE BULLETIN
FIN 1CS
1 THSA 47175-200
or
FIN 1CS
1 THSA 47175-300
or
FIN 1CS
1 THSA 47175-500
or
FIN 1CS
1 THSA 47175-520
(b) Install a serviceable THSA, FIN 1CS, refer to AMM Task 27-44-51-400-801.
NOTE
: If a different P/N must be installed the associated Service
Bulletins must be reported accomplished to maintain correct aircraft
configuration.
D. TEST
(1) Subtask 275062-700-002-001 - Testing
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-44-51-400-801
(a) Job Set-up
1
 Remove the safety clips and/or tags and close/unlock the circuit breakers as
specified after the installation of the THSA FIN 1CS, refer to AMM Task
27-44-51-400-801.
(b) Procedure
1
 Do the test procedure as specified after the installation of the THSA FIN 1CS,
refer to AMM Task 27-44-51-400-801.
E. CLOSE-UP
(1) Subtask 275062-942-002-001 - Close-up
Manpower Resources
Skills
 NON SPECIFIC
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 20
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A340-500/600
SERVICE BULLETIN
References
Aircraft Maintenance Manual (AMM)
 Task 27-44-51-400-801
(a) Do the Close-up procedure as specified after the installation of the THSA (FIN
1CS), refer to AMM Task 27-44-51-400-801.
(b) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(c) Close the access door 312AR.
(d) Remove the access platform(s).
(e) Restore the systems and the aircraft to normal operating condition.
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 21
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A340-500/600
SERVICE BULLETIN
**CONF ALL
FR87
FR80
B
B
312AR
A
THSA TO BE INSPECTED
 − Z311 Z312
A
1CS
F_SB_275062_5_BAAA_01_01
Figure A-F BAAA - S heet 01
Area to be Inspected
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 22
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A340-500/600
SERVICE BULLETIN
**CONF ALL
QUESTION
ACTION
FINDING
NOTE:
THE PURPOSE OF FLOW CHARTS IS TO SUPPLEMENT THE INFORMATION GIVEN IN THE PROCEDURE
AND COMPLIANCE PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE FOR TASKS OR
COMPLIANCE TIMES GIVEN IN THIS SERVICE BULLETIN
PN 47175−530YES NO
CHECK OF THE TRIMMABLE HORIZONTAL
STABILIZER ACTUATOR (THSA) PN (FIN 1CS) AT THE THRESHOLD
GIVEN IN THE PLANNING INFORMATION PARAGRAPH E.(2)
THSA
APPLY ALS PART 4
PN 47175−200 OR
PN 47175−300 OR
THSA
PN 47175−500 OR
PN 47175−520
SCHEDULE THE NEXT THSA MAINTENANCE FOR (NBB) DISKS REPLACEMENT 
IN ACCORDANCE WITH SUBTASK 275062−200−001−001
IN ACCORDANCE WITH TASK 275062−833−801−001
REMOVE THSA AND 
IN ACCORDANCE WITH TASK 275062−832−801−001
 INSTALL A SERVICEABLE THSA
F_SB_275062_5_FAAA_01_02
Figure A-FFAAA - Sheet 01
Flow Chart
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 23
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A340-500/600
SERVICE BULLETIN
**CONF ALL
THSA PN 47175−530
THSA PN 47175−200 OR PN 47175−300 OR PN 47175−500
OR PN 47175−520
INSPECTION REPORT
SERVICE BULLETIN No :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A340−27−5062
DATE OF INSPECTION :
RETURN TO :
AIRBUS
CUSTOMER SERVICES ENGINEERING − SEEL3
FLIGHT CONTROL SYSTEMS A330/A340
INSPECTION METHOD :
1 ROND POINT MAURICE BELLONTE
31707 BLAGNAC CEDEX
FRANCE
DETAILED
INSPECTION
FAX +33 (0)5 61 93 32 73
YES NO
YES NO
& WIDE BODY
THSA REPLACED YES NO
TOTAL FLIGHT HOURS FOR THSA
TOTAL FLIGHT CYCLES FOR THSA
FLIGHT CYCLES SINCE LAST DISKS REPLACEMENT
F_SB_275062_5_RAAA_01_02
Figure A-FRAAA - Sheet 01
Inspection Report
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 24
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29

@A340-500/600
SERVICE BULLETIN
REPORTING SHEET
TITLE: FLIGHT CONTROLS - TRIMMABLE HORIZONTAL STABILIZER
ACTUATOR - CHECK P/N AND SCHEDULE NEXT NBB DISKS
REPLACEMENT
MODIFICATION No.: None
Please complete the appropriate item (A or B):
A - SB WILL BE
 embodied YES/NO (if NO please comment)
If YES, aircraft concer ned (as per SB effectivity by default) and planned dates (month/year) of
embodiment:
B - SB HAS BEEN
 embodied on aircraft:
Operator comments:
From Airline:
Name/Title:
Signature: Date:
If operational documentation is affected (see Paragraph 1.K of this SB): If information is needed prior to
next normal revision or prior to SB embodiment, please indicate required service(s):
Either: Modification Operational Impact (MOI), if available YES/NO
Or : Intermediate revision YES/NO
Important Information:
 This SB will only be incorporated in your maintenance and operational
documentation if this sheet is returned to Airbus and signed by a duly authorised representative. With
the next feasible revision, this will result in
- Updating of maintenance documentation to show pre and post SB data.
- Updating of maintenance and operational documentation to show post SB data after embodiment.
If this SB requires previous or simultaneous accomplishment of other SBs, Airbus shall automatically
include them in the manual revisions. Refer to SIL 00-037 for detailed information.
Please return this completed sheet to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn: SDC32 Technical Data and Documentation Services
F A X :( + 3 3 )56 19 32 80 6
e-mail: sb.reporting@airbus.com
or via your Resident Customer Support Office.
Alternatively, SB lists via letters or fax are also accepted.
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 30

@A340-500/600
SERVICE BULLETIN
QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin. The reported data
that you provide us will be used to analyse areas of difficulties and to take corrective action to further
improve the quality of our Service Bulletins.
We thank you for the time you have taken in completing this form.
(Please rate on a scale of 1 to 4, with 4 being the highest score)
- Quality rating of this SB 4321
- Quality rating of the Accomplishment Instructions 4321
- Quality rating of the Illustrations 4321
- Is this SB easy to understand ? Y/N
If you have had difficulties in the accomplishment of this SB please quote below the area(s) and give a
short description of the issue.
Planning Material Instructions
X Effectivity X Kit content X Preparation
X Reason X List of Materials Operator Supplied X Mod/Inspection
X Manpower X Industry support X Test
X References X Re-identification X Close-Up
X Publication X Tooling X Illustrations
Comments:
Operator: Date:
Name/Title:
Please return this form to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn : SEM4 Service Bulletins Management
F A X:( 3 3 )56 19 34 25 1
Or via your Resident Customer Support Office.
DATE: Jul 15/14 SERVICE BULLETIN No.: A340-27-5062
REVISION No.: 00 - Jul 15/14 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
