# Airbus Service Bulletin A340-27-5071

Copy: No revision named ("A340-27-5071 R00"), 42 pages: PDF https://openairdocs.org/files/sha256/5a/7d/5a7da7952ca8f6ce526abe1753744736058b7e4a1db315f4ab075209cf15bb76; text https://openairdocs.org/service-documents/airbus/a340-27-5071/file/5a7da7952ca8.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-0904; AD 2019-03-23 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A340-27-5071
- Page: https://openairdocs.org/service-documents/airbus/a340-27-5071

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2019-03-23](https://openairdocs.org/ad/2019-03-23.md), effective Apr 3, 2019: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a340-27-5071/proposed.md).

## Text (42 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-0904; AD 2019-03-23 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A340-500/600
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 27
TITLE: HIGH LIFT SYSTEM - OUTBOARD FLAP - VISUAL INSPECTION OF
THE DRIVE STATION ELEMENTS AT TRACK 4 AND 5 FOR
A340-500/-600 AIRCRAFT
**CONF ALL
MODIFICATIONS
None
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
The track 4 sensor strut aims at detecting any abnormal flap movement due to mechanical drive station
elements disconnection at flap track 4 or track 5.
Recent investigations revealed that current standard would be unable to provide failure detection
information in case of down drive shaft disconnection. Undetected down drive shaft disconnection may
lead to complete flap disconnection in the case of additional failure on the remaining flap drive station.
The track 4 sensor strut attachment bolts are not expected to sustain the loads induced by a down
drive disconnection at track 5.
Repetitive visual inspections of the down drive components at track 4 and the track 4 sensor strut will
ensure the integrity of potentially affected outboard flap drive station elements.
This Inspection Service Bulletin provides instructions for repetitive visual inspection of the down drive
components at track 4 and the track 4 sensor struts of the wings. In case of findings at track 4 sensor
strut, inspection of the driving components of track 5 will be required.
The accomplishment of this Inspection Service Bulletin will allow to confirm the integrity of the
potentially affected outboard flap drive station elements, keeping adequate level of airworthiness and
safety, until a new sensor strut is available.
The Operational/Maintenance Consequences of this Service Bulletin are covered by the update of the
affected publications detailed in ’PLANNING INFORMATION’.
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A340-500/600
SERVICE BULLETIN
SUMMARY
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 LROPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 NO
NOTE
 (1)
: Service Bulletin must be accomplished.
MATERIAL PRICE INFORMATION
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Component COMPD01
 1
 See SB
EFFECTIVITY
This Service Bulletin is applicable to this (these) operator(s) :
06U 32P 41N 65W 72W 81Q 83V AHY AIB ARA DLH ETD F2I
G4I GBB HFY I2L IBE IRM LHT QAF QTR R1T SAA TAM THA
THY VIR
CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU
 None
OEB
 None
AOT
 None
SIL
 None
ISI
 None
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 None
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 YES
HARD
 NO
SOFT
 NO
OBRM
 NO
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 2
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A340-500/600
SERVICE BULLETIN
SUMMARY
MANPOWER
Task 275071-832-848-001: Inspection of Drive Station Elements at Track 4 and 5
TOTAL MANHOURS
 7.00
ELAPSED TIME (HOURS)
 5.75
APPENDICES
Appendix 01 - Manpower Gantt Chart
Appendix 02 - Inspection Report
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 3
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A340-500/600
SERVICE BULLETIN
SUMMARY
**CONF ALL
Z534 LH
Z634 RH
LH
RHZ633
Z533
ROTARY ACTUATORCROSS SHAFT
A
B
HIGH LIFT SYSTEM−OUTBOARD
FLAP−VISUAL INSPECTION
OF THE DRIVE STATION
ELEMENTS AT TRACK
4 AND 5
DOWN DRIVE GEARBOX
DRIVE STRUT
INPUT GEARBOX
A B
B
LH SHOWN
RH SYMMETRICAL
LH SHOWN
RH SYMMETRICAL
SENSOR STRUT
INSPECTION OF THE
TRACK 4 SENSOR STRUT
F_SB_275071_6_SAAA_01_01
Figure A-GSAAA - Sheet 01
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 4
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A340-500/600
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 27
TITLE: HIGH LIFT SYSTEM - OUTBOARD FLAP - VISUAL INSPECTION OF
THE DRIVE STATION ELEMENTS AT TRACK 4 AND 5 FOR
A340-500/-600 AIRCRAFT
MODIFICATION No.: None
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
(1) Models
340-541 340-542 340-642
(2) Effectivity by MSN
0371 0376 0383 0391 0410 0416-0417 0426 0431 0440 0445 0449 0457 0460 0464
0468 0471 0478 0482 0485 0488 0492 0495 0499 0514 0517 0520 0523 0531 0534
0537 0540 0543 0547 0557 0560 0563 0566 0569 0572 0575 0577 0580 0583 0586
0601 0604 0606 0608 0611 0615 0617 0619 0622 0624 0626 0628 0630 0639 0672
0677 0681 0685 0689 0694 0698 0702 0706 0710 0715 0719 0723 0727 0736 0740
0744 0748 0753 0757 0761-0768 0771 0775 0779 0783 0787 0790 0794 0798 0804
0812 0829 0837 0846 0848 0870 0886 0894 0897 0902 0910 0912 0917 0924 0929
0933 0953 0960 0972 0981 0987 0993 1005 1017 1030 1040 1079 1091 1102 1122
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A340-500/600
SERVICE BULLETIN
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
06U
 1091 1102
32P
 0560
41N
 0924
65W
 0933 1030
72W
 0917
81Q
 0563
83V
 0572
AHY
 0779 0886 0894
AIB
 0457 0471 0478 0485 0492 0499 0520 0608 0685
ARA
 0910
DLH
 0482 0517 0523 0537 0540 0543 0566 0569 0580 0583 0762 0763
0767 0771 0790 0794 0812 0846 0848 0897 0972 0981 0987 1005
ETD
 0757 0761 0783 0829 0837 0870 0929 1040
F2I
 0575 0706 0723
G4I
 0748
GBB
 0611 0694
HFY
 0912
I2L
 0639
IBE
 0431 0440 0460 0601 0604 0606 0617 0619 0672 0702 0727 0744
0960 0993 1017 1079 1122
IRM
 0371 0376 0383 0391 0416 0449 0615
LHT
 0464 0468 0488 0514 0577 0586
QAF
 0495
QTR
 0715 0740 0766 0798
R1T
 0698
SAA
 0410 0417 0426 0531 0534 0547 0557 0626 0630
TAM
 0445
THA
 0624 0628 0677 0681 0689 0710 0719 0775 0953
THY
 0902
VIR
 0622 0736 0753 0764 0765 0768 0787 0804
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 2
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A340-500/600
SERVICE BULLETIN
(4) Configuration by MSN
MSN
 CONFIGURATION
0371 0376 0383 0391 0410 0416 0417 0426 0431 0440 0445
0449 0457 0460 0464 0468 0471 0478 0482 0485 0488 0492
0495 0499 0514 0517 0520 0523 0531 0534 0537 0540 0543
0547 0557 0560 0563 0566 0569 0572 0575 0577 0580 0583
0586 0601 0604 0606 0608 0611 0615 0617 0619 0622 0624
0626 0628 0630 0639 0672 0677 0681 0685 0689 0694 0698
0702 0706 0710 0715 0719 0723 0727 0736 0740 0744 0748
0753 0757 0761 0762 0763 0764 0765 0766 0767 0768 0771
0775 0779 0783 0787 0790 0794 0798 0804 0812 0829 0837
0846 0848 0870 0886 0894 0897 0902 0910 0912 0917 0924
0929 0933 0953 0960 0972 0981 0987 0993 1005 1017 1030
1040 1079 1091 1102 1122
001
(5) Configuration definition
**CONF 001
Config. 001 is valid for all the aircraft given in the effectivity of this Service Bulletin as a
standard configuration.
(6) Material Effectivity
MATERIAL
 QTY PER A/C
 SEE NOTES
Component COMPD01
 1
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
The track 4 sensor strut aims at detecting any abnormal flap movement due to
mechanical drive station elements disconnection at flap track 4 or track 5.
Recent investigations revealed that current standard would be unable to provide failure
detection information in case of down drive shaft disconnection. Undetected down drive
shaft disconnection may lead to complete flap disconnection in the case of additional
failure on the remaining flap drive station.
The track 4 sensor strut attachment bolts are not expected to sustain the loads induced
by a down drive disconnection at track 5.
Repetitive visual inspections of the down drive components at track 4 and the track 4
sensor strut will ensure the integrity of potentially affected outboard flap drive station
elements.
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 3
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A340-500/600
SERVICE BULLETIN
(2) Objective/Action
This Inspection Service Bulletin provides instructions for repetitive visual inspection of
the down drive components at track 4 and the track 4 sensor struts of the wings. In case
of findings at track 4 sensor strut, inspection of the driving components of track 5 will be
required.
(3) Advantages
The accomplishment of this Inspection Service Bulletin will allow to confirm the integrity
of the potentially affected outboard flap drive station elements, keeping adequate level of
airworthiness and safety, until a new sensor strut is available.
(4) Operational/Maintenance Consequences
The Operational/Maintenance Consequences of this Service Bulletin are covered by the
update of the affected publications detailed in ’PLANNING INFORMATION’.
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
Task 275071-832-848-001: Inspection of Drive Station Elements at Track 4 and 5
(1) Inspect the LH Track 4 Drive Station Elements
(2) Inspect the LH Track 4 Sensor Strut
(3) Inspect the LH Track 5 Drive Station Elements Depending on the Results of the LH
Track 4 Sensor Strut Inspection
(4) Inspect the RH Track 4 Drive Station Elements
(5) Inspect the RH Track 4 Sensor Strut
(6) Inspect the RH Track 5 Drive Station Elements Depending on the Results of the RH
Track 4 Sensor Strut Inspection
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA) will be issued
to confirm this classification. It is anticipated that the AD will confirm the thresholds
given above but reference should be made to the AD for confirmation of the mandated
accomplishment timescale.
Accomplishment of this Service Bulletin must be done, refer to Table 1, Table 2, and
Table 3.
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 4
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A340-500/600
SERVICE BULLETIN
Table 1, Detailed Inspection of Track 4 Drive Station Elements
Compliance Time
Condition
 Action
Threshold
 Grace Period
Repetitive Inerval
Aircraft in the
effectivity of this
Service Bulletin
with < 1000 FC
from the aircraft
first flight
Do a detailed
inspection of the
LH and RH Track
4 drive station
elements (Down
Drive, Down Drive
Shaft, Geared
Rotary Actuator
(gearbox) Geared
Rotary Actuator
(output lever and
fork end), Drive
Strut) in
accordance with
SUBTASK
275071-832-201
001 Inspect the LH
Track 4 Drive
Station Elements
and SUBTASK
275071-832-204
001 Inspect the RH
Track 4 Drive
Station Elements
2300 FC or 24
months from the
aircraft first flight,
whichever occur
first
None
 1600 FC or 24
months, whichever
occur first
Aircraft in the
effectivity of this
Service Bulletin
with 1000 FC or
more from the
aircraft first flight
Do a detailed
inspection of the
LH and RH Track
4 drive station
elements (Down
Drive, Down Drive
Shaft, Geared
Rotary Actuator
(gearbox) Geared
Rotary Actuator
(output lever and
fork end), Drive
Strut) in
accordance with
SUBTASK
275071-832-201
001 Inspect the LH
Track 4 Drive
Station Elements
and SUBTASK
275071-832-204
001 Inspect the RH
Track 4 Drive
Station Elements
1000 FC or 12
months from the
issue of this
Service Bulletin,
whichever occur
first
None
 1600 FC or 24
months, whichever
occur first
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 5
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A340-500/600
SERVICE BULLETIN
Track 4 Drive
Station Elements
found with no
damage
Continue to
SUBTASK
275071-832-202
001 Inspect the LH
Track 4 Sensor
Strut and
SUBTASK
275071-832-205
001 Inspect the RH
Track 4 Sensor
Strut , refer to
Table 2
Before next flight
 None
 None
Track 4 Drive
Station Elements
found with damage
Replace any
affected parts and
continue to
SUBTASK
275071-832-202
001 Inspect the LH
Track 4 Sensor
Strut and
SUBTASK
275071-832-205
001 Inspect the RH
Track 4 Sensor
Strut , refer to
Table 2
Before next flight
 None
 None
Table 2, General Visual Inspection of the Track 4 Sensor Strut
Compliance Time
Condition
 Action
Threshold
 Grace Period
Repetitive Interval
Aircraft in the
effectivity of this
Service Bulletin
with < 1000 FC
from the aircraft
first flight
Perform a general
visual inspection of
the LH and RH
Track 4 Sensor
Struts in
accordance with
SUBTASK
275071-832-202
001 Inspect the LH
Track 4 Sensor
Strut and
SUBTASK
275071-832-205
001 Inspect the RH
Track 4 Sensor
Strut
2300 FC or 24
months from the
aircraft first flight,
whichever occur
first
None
 1600 FC or 24
months, whichever
occur first
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 6
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A340-500/600
SERVICE BULLETIN
Aircraft in the
effectivity of this
Service Bulletin
with 1000 FC or
more from the
aircraft first flight
Perform a general
visual inspection of
the LH and RH
Track 4 Sensor
Struts in
accordance with
SUBTASK
275071-832-202
001 Inspect the LH
Track 4 Sensor
Strut and
SUBTASK
275071-832-205
001 Inspect the RH
Track 4 Sensor
Strut
1000 FC or 12
months from the
issue of this
Service Bulletin,
whichever occur
first
None
 1600 FC or 24
months, whichever
occur first
Track 4 Sensor
Strut found with no
damage
Report to AIRBUS
and no further
action required
None
 None
 None
Track 4 Sensor
Strut found with
damage
Replace any
affected parts and
r e f e rt oT a b l e3f o r
further instructions
Before next flight
 None
 None
Table 3, Detailed Inspection of Track 5 Drive Station Elements
Compliance Time
Condition
 Action
Threshold
 Grace Period
Repetitive Inerval
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 7
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A340-500/600
SERVICE BULLETIN
From Table 2,
damage found
during the general
visual inspection of
the Track 4 Sensor
Strut LH or RH
Do a detailed
inspection of the
Track 5 drive
station elements
(Down Drive, Down
Drive Shaft,
Geared Rotary
Actuator (gearbox)
Geared Rotary
Actuator (output
lever and fork
end), Drive Strut)
in accordance with
SUBTASK
275071-832-203
001 Inspect the LH
Track 5 Drive
Station Elements
Depending on the
Results of the LH
Track 4 Sensor
Strut Inspection or
SUBTASK
275071-832-206
001 Inspect the RH
Track 5 Drive
Station Elements
Depending on the
Results of the RH
Track 4 Sensor
Strut Inspection
Before next flight
 None
 None
Track 5 Drive
Station Element
found with no
damage
Report to AIRBUS
 None
 None
 None
Replace any
affected parts
Before next flight
 None
 None
Track 5 Drive
Station Element
found with damage
 Report to AIRBUS
inspection findings
None
 None
 None
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organization Approval No. EASA.21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 8
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A340-500/600
SERVICE BULLETIN
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
Task 275071-832-848-001: Inspection of Drive Station Elements at Track 4 and 5
Get Access
 2.00
On Aircraft
Inspect the LH Track 4 Drive Station Elements
 0.50
Inspect the LH Track 4 Sensor Strut
 0.25
Inspect the LH Track 5 Drive Station Elements
Depending on the Results of the LH Track 4 Sensor
Strut Inspection
0.50
Inspect the RH Track 4 Drive Station Elements
 0.50
Inspect the RH Track 4 Sensor Strut
 0.25
Inspect the RH Track 5 Drive Station Elements
Depending on the Results of the RH Track 4 Sensor
Strut Inspection
0.50
Close-Up
 2.50
TOTAL MANHOURS
 7.00
ELAPSED TIME (HOURS)
 5.75
NOTE
: For an explanation of man-hours and elapsed time, refer to the Gantt Chart,
Fig. A-GAAAA
 given in Appendix 01.
NOTE
: The minimum man-hours to accomplish this Service Bulletin are those for the
Inspection. Depending on the inspection results, additional man hours can
apply.
H. WEIGHT AND BALANCE
Not Changed
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
Aircraft Maintenance Manual (AMM)
 06-20-00 06-41-57 12-34-24
24-41-00 24-42-00 27-50-00
27-51-45 27-54-00 27-54-55
27-54-56 27-54-57 27-54-59
27-54-76 29-00-00 29-14-00
57-56-11
Elec. Std. Practices Manual (ESPM)
 20-55-00
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 9
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A340-500/600
SERVICE BULLETIN
K. PUBLICATION AFFECTED
Aircraft Maintenance Manual (AMM)
 27-51-45 27-54-00
Impact on scheduled maintenance: Refer to MPD
L. INTERCHANGEABILITY/MIXABILITY
Not Applicable
M. SPARES
None
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 10
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A340-500/600
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
Customers with aircraft shown in the effectivity of this Service Bulletin should send a
purchase order to AIRBUS. Quote the number of this Service Bulletin. The address is:
Component COMPD01
 AIRBUS Material, Logistics and Suppliers
IFD - In Flight Desk
Weg Beim Jaeger 150
D-22335 HAMBURG
GERMANY
For ordering by internet:
http://spares.airbus.com
For ordering by fax: +49 40 50 76 4012
For ordering by email: ifd.spares@airbus.com
(2) Price and Availability
Operator supplied AIRBUS parts required to accomplish this Service Bulletin are to be
purchased by a spares purchase order.
B. INDUSTRY SUPPORT INFORMATION
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.
C. LIST OF COMPONENTS
No Kit
D. LIST OF MATERIALS - OPERATOR SUPPLIED
(1) Consumable Materials
None
(2) Components
Component COMPD01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
1
 F5757492600000
 2
 SENSOR
 (1)
 F5757492600000
1
 F5757492600200
 2
 SENSOR
 (1)
 F5757492600200
2
 F5757116820000
 2
 BOLT
 (2)
 F5757116820000
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 11
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A340-500/600
SERVICE BULLETIN
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
2
 F5757116820200
 2
 BOLT
 (2)
 F5757116820200
2
 G5757146320200
 2
 BOLT
 (2)
 G5757146320200
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE
: The components listed above are only necessary if parts are found
damaged. The quantity of these items are to be ordered as required.
(3) Equipment
None
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
F. TOOLING
(1) Tooling - Price and Availability
None
(2) Tools
To accomplish this Service Bulletin it is necessary to use the tools listed in the
subsequent referenced tasks:
AMM Task 27-50-00-866-801
(3) Special Tools
None
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 12
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A340-500/600
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 275071-832-848-001 - Inspection of Drive Station Elements at Track 4 and 5
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions contained herein, contact AIRBUS for further
instructions and approval.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. To allow more flexibility, the rule "refer to" and "in
accordance with" will aplly to these paragraphs 3.C. and 3.D. Other paragraphs are
recommended and may be deviated from, done as part of other actions or done
with accepted methods different from those given in the Service Bulletin, as long
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 13
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A340-500/600
SERVICE BULLETIN
as the RC paragraphs can be done and the aircraft can be put back into a
serviceable condition.
NOTE
: Upload the completed Inspection Report sheet in accordance with ISI 00.00.00179.
NOTE
: Uploading the Inspection Report sheet is not Required for Compliance.
NOTE
: Discarded parts must be managed at the operator’s discretion.
NOTE
: The purpose of flowcharts is to supplement the information given in the Procedure
and Compliance paragraphs and not to serve as the primary source for tasks or
compliance times given in this Service Bulletin.
Task Associated Data
Zone
533 534 633 634
Manpower
TOTAL MANHOURS
 7.00
ELAPSED TIME (HOURS)
 5.75
A. GENERAL
(1) Subtask 275071-910-201-001 - Standard Practices
Manpower Resources
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
06-41-57, Page Block 001
(a) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(b) For the identification of access panels, refer to AMM 06-41-57, Page Block 001.
(c) Tag all the parts you must remove and retain to make the subsequent installation
easier.
(2) Subtask 275071-839-201-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 14
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A340-500/600
SERVICE BULLETIN
B. PREPARATION
(1) Subtask 275071-941-201-001 - Job Set-up
Work Zones and Access Panels
Zone
 Access/Work location
533
534
633
634
Manpower Resources
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-860-802
Task 24-41-00-860-801
Task 24-42-00-861-801
Task 27-50-00-866-801
Task 29-00-00-864-804
Task 29-14-00-614-801
Task 29-14-00-614-803
WARNING
: MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT
CONTROLS ARE CLEAR. MOVEMENT OF FLIGHT CONTROLS CAN
CAUSE INJURY TO PERSONS AND/OR DAMAGE.
NOTE
: For the basic Aircraft configuration, refer to AMM Chapter "Introduction -
Aircraft status for maintenance" in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Energize the ground service network, refer to AMM Task 24-42-00-861-801.
(c) Extend the flaps to position "FULL", refer to AMM Task 27-50-00-866-801.
1
 On panel 114VU insert t he LOCKING TOOL - FLAP SLAT LEVER into
position.
(d) Depressurize the GREEN and YELLOW hydraulic system, refer to AMM Task
29-00-00-864-804.
(e) Depressurize the GREEN hydraulic system reservoir, refer to AMM Task
29-14-00-614-801.
(f) Depressurize the YELLOW hydraulic system reservoir, refer to AMM Task
29-14-00-614-803.
(g) On panel 114VU put WARNING NOTICE(S) into position to tell persons not to
operate the flap/slat controls.
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 15
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A340-500/600
SERVICE BULLETIN
(h) Put an access platform(s) 5M (16FT) in position beside the LH zone 533 and RH
zone 633 flap track 4.
C. PROCEDURE
(1) Subtask 275071-832-201-001 - Inspect the LH Track 4 Drive Station Elements
Work Zones and Access Panels
Zone
 Access/Work location
533
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 27-54-55-000-804
Task 27-54-55-400-804
Task 27-54-56-960-801
Task 27-54-57-000-801
Task 27-54-57-400-801
Task 27-54-59-000-802
Task 27-54-59-400-802
Task 27-54-76-000-805
Task 27-54-76-400-805
Fig. A-GBAAA
Inspection of the Drive Station Elements
Sheet 01
Sheet 02
WARNING
: BEFORE YOU START WORK, YOU MUST PUT ON A SAFETY
HARNESS AND ATTACH IT TO THE ACCESS PLATFORM. WITHOUT
A SAFETY HARNESS, YOU CAN FALL. THIS CAN KILL YOU OR
CAUSE YOU INJURY.
(a) Do a detailed inspection of the Track 4 Drive Station Elements, refer to Fig. A-
GBAAA
.
NOTE
: Inspection criteria are corrosion, ruptured, loose, or missing
components. This includes any attached bolts and nuts that are
loose, broken, or missing.
1
 Inspect the Down Drive Gearbox FIN No. 5040CV.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Down Drive Gearbox, refer to AMM Task
27-54-55-000-804 and AMM Task 27-54-55-400-804.
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 16
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A340-500/600
SERVICE BULLETIN
2
 Inspect the Down Drive Shaft FIN No. 5041CV.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Down Drive Shaft, refer to AMM Task
27-54-56-960-801.
3
 Inspect the Geared Rotary Actuator Input Gearbox FIN No. 5042CV.
a
 If damage if found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Geared Rotary Actuator Input Gearbox, refer to
AMM Task 27-54-57-000-801 and AMM Task 27-54-57-400-801.
4
 Inspect the Geared Rotary Actuator Output Lever and Fork End FIN No.
5044CV.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Geared Rotary Actuator, refer to AMM Task
27-54-59-000-802 and AMM Task 27-54-59-400-802.
5
 Inspect the Drive Strut and attached bolts.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Drive Strut, refer to AMM Task
27-54-76-000-805 and AMM Task 27-54-76-400-805.
(b) Proceed to SUBTASK 275071-832-202 001 Inspect the LH Track 4 Sensor Strut .
(2) Subtask 275071-832-202-001 - Inspect the LH Track 4 Sensor Strut
Work Zones and Access Panels
Zone
 Access/Work location
533
Manpower Resources
Manhours
 0.25
Minimum number of person
 1
Subtask elapsed time
 0.25
Skills
 AIRFRAME
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 17
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A340-500/600
SERVICE BULLETIN
Material necessary to do the job
Component COMPD01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 F5757492600000
 1
 SENSOR
1
 F5757492600200
 1
 SENSOR
2
 F5757116820000
 1
 BOLT
2
 F5757116820200
 1
 BOLT
2
 G5757146320200
 1
 BOLT
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE
: The components listed above are only necessary if parts are found
damaged. The quantity of these items are to be ordered as required.
References
Aircraft Maintenance Manual (AMM)
 Task 27-51-45-000-801
Task 27-51-45-400-801
Fig. A-GBBAA
Inspection of the Track 4 Sensor Strut
Sheet 01
WARNING
: BEFORE YOU START WORK, YOU MUST PUT ON A SAFETY
HARNESS AND ATTACH IT TO THE ACCESS PLATFORM. WITHOUT
A SAFETY HARNESS, YOU CAN FALL. THIS CAN KILL YOU OR
CAUSE YOU INJURY.
(a) Do a general visual inspection of the Track 4 Sensor Strut, refer to Fig. A-GBBAA
.
NOTE
: Inspection criteria are corrosion, ruptured, loose, or missing
components and attached bolts are loose, broken, or missing.
NOTE
: If damage is found, you must ensure the second attached bolt
(forward side) is not damaged (affected part numbers not listed
below). If damage is found the second attached bolt (forward side)
must be replaced also.
1
 If damage is found:
a
 Replace the damaged parts or contact AIRBUS for repair instructions
before the next flight, refer to AMM Task 27-51-45-000-801 and AMM
Task 27-51-45-400-801:
1 Sensor-Strut F5757492600000 Item (1) Discard
with
1 Sensor-Strut F5757492600000 Item 1
or
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 18
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A340-500/600
SERVICE BULLETIN
1 Sensor-Strut F5757492600200 Item (1) Discard
with
1 Sensor-Strut F5757492600200 Item 1
or
1 Bolt F5757116820000 Item (2) Discard
with
1 Bolt F5757116820000 Item 2
or
1 Bolt F5757116820200 Item (2) Discard
with
1 Bolt F5757116820200 Item 2
or
1 Bolt G5757146320200 Item (2) Discard
with
1 Bolt G5757146320200 Item 2
b
 Continue to substask SUBTASK 275071-832-203 001 Inspect the LH
Track 5 Drive Station Elements Depending on the Results of the LH
Track 4 Sensor Strut Inspection .
2
 If no damage is found:
a
 Report to AIRBUS the inspection results.
b
 No further action.
c
 Repeat inspection in accordance with paragraph 1.E.2 Accomplishment
Timescale.
(3) Subtask 275071-832-203-001 - Inspect the LH Track 5 Drive Station Elements
Depending on the Results of the LH Track 4 Sensor Strut Inspection
Work Zones and Access Panels
Zone
 Access/Work location
534
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 19
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A340-500/600
SERVICE BULLETIN
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 27-54-55-000-803
Task 27-54-55-400-803
Task 27-54-56-960-801
Task 27-54-57-000-801
Task 27-54-57-400-801
Task 27-54-59-000-802
Task 27-54-59-400-802
Task 27-54-76-000-806
Task 27-54-76-400-806
Task 57-56-11-000-807
Fig. A-GBAAA
Inspection of the Drive Station Elements
Sheet 01
Sheet 02
WARNING
: BEFORE YOU START WORK, YOU MUST PUT ON A SAFETY
HARNESS AND ATTACH IT TO THE ACCESS PLATFORM. WITHOUT
A SAFETY HARNESS, YOU CAN FALL. THIS CAN KILL YOU OR
CAUSE YOU INJURY.
NOTE
: This Subtask is only required depending on the results of the LH Track 4
Sensor Strut Inspection as per SUBTASK 275071-832-202 001 Inspect
the LH Track 4 Sensor Strut .
(a) Job Set-up:
1
 Put access platform in position besides the LH Flap Track 5.
2
 Remove the Flap Track Fairing at Track 5, refer to AMM Task
57-56-11-000-807.
(b) Do a detailed inspection of the Track 5 Drive Station Elements, refer to Fig. A-
GBAAA
.
NOTE
: Inspection criteria are corrosion, ruptured, loose, or missing
components. This includes any attached bolts and nuts that are
loose, broken, or missing.
1
 Inspect the Down Drive Gearbox FIN No. 5051CV.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Down Drive Gearbox, refer to AMM Task
27-54-55-000-803 and AMM Task 27-54-55-400-803.
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 20
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A340-500/600
SERVICE BULLETIN
2
 Inspect the Down Drive Shaft FIN No. 5052CV.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Down Drive Shaft, refer to AMM Task
27-54-56-960-801.
3
 Inspect the Geared Rotary Actuator Input Gearbox FIN No. 5053CV.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Geared Rotary Actuator Input Gearbox, refer to
AMM Task 27-54-57-000-801 and AMM Task 27-54-57-400-801.
4
 Inspect the Geared Rotary Actuator Output Lever and Fork End FIN No.
5055CV.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Geared Rotary Actuator, refer to AMM Task
27-54-59-000-802 and AMM Task 27-54-59-400-802.
5
 Inspect the Drive Strut and attached bolts.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Drive Strut, refer to AMM Task
27-54-76-000-806 and AMM Task 27-54-76-400-806.
6
 Report inspection results to AIRBUS.
7
 Repeat the inspection in accordance with paragraph 1.E.2 Accomplishment
Timescale.
(4) Subtask 275071-832-204-001 - Inspect the RH Track 4 Drive Station Elements
Work Zones and Access Panels
Zone
 Access/Work location
633
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 21
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A340-500/600
SERVICE BULLETIN
References
Aircraft Maintenance Manual (AMM)
 Task 27-54-55-000-804
Task 27-54-55-400-804
Task 27-54-56-960-801
Task 27-54-57-000-801
Task 27-54-57-400-801
Task 27-54-59-000-802
Task 27-54-59-400-802
Task 27-54-76-000-805
Task 27-54-76-400-805
Fig. A-GBAAA
Inspection of the Drive Station Elements
Sheet 01
Sheet 02
WARNING
: BEFORE YOU START WORK, YOU MUST PUT ON A SAFETY
HARNESS AND ATTACH IT TO THE ACCESS PLATFORM. WITHOUT
A SAFETY HARNESS, YOU CAN FALL. THIS CAN KILL YOU OR
CAUSE YOU INJURY.
(a) Do a detailed inspection of the Track 4 Drive Station Elements, refer to Fig. A-
GBAAA
.
NOTE
: Inspection criteria are corrosion, ruptured, loose, or missing
components. This includes any attached bolts and nuts that are
loose, broken, or missing.
1
 Inspect the Down Drive Gearbox FIN No. 5118CV.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Down Drive Gearbox, refer to AMM Task
27-54-55-000-804 and AMM Task 27-54-55-400-804.
2
 Inspect the Down Drive Shaft FIN No. 5119CV.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Down Drive Shaft, refer to AMM Task
27-54-56-960-801.
3
 Inspect the Geared Rotary Actuator Input Gearbox FIN No. 5120CV.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Geared Rotary Actuator Input Gearbox, refer to
AMM Task 27-54-57-000-801 and AMM Task 27-54-57-400-801.
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 22
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A340-500/600
SERVICE BULLETIN
4
 Inspect the Geared Rotary Actuator Output Lever and Fork End FIN No.
5122CV.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Geared Rotary Actuator, refer to AMM Task
27-54-59-000-802 and AMM Task 27-54-59-400-802.
5
 Inspect the Drive Strut and attached bolts.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Drive Strut, refer to AMM Task
27-54-76-000-805 and AMM Task 27-54-76-400-805.
(b) Proceed to SUBTASK 275071-832-205 001 Inspect the RH Track 4 Sensor Strut .
(5) Subtask 275071-832-205-001 - Inspect the RH Track 4 Sensor Strut
Work Zones and Access Panels
Zone
 Access/Work location
633
Manpower Resources
Manhours
 0.25
Minimum number of person
 1
Subtask elapsed time
 0.25
Skills
 AIRFRAME
Material necessary to do the job
Component COMPD01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 F5757492600000
 1
 SENSOR
1
 F5757492600200
 1
 SENSOR
2
 F5757116820000
 1
 BOLT
2
 F5757116820200
 1
 BOLT
2
 G5757146320200
 1
 BOLT
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE
: The components listed above are only necessary if parts are found
damaged. The quantity of these items are to be ordered as required.
References
Aircraft Maintenance Manual (AMM)
 Task 27-51-45-000-801
Task 27-51-45-400-801
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 23
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A340-500/600
SERVICE BULLETIN
References
Fig. A-GBBAA
Inspection of the Track 4 Sensor Strut
Sheet 01
WARNING
: BEFORE YOU START WORK, YOU MUST PUT ON A SAFETY
HARNESS AND ATTACH IT TO THE ACCESS PLATFORM. WITHOUT
A SAFETY HARNESS, YOU CAN FALL. THIS CAN KILL YOU OR
CAUSE YOU INJURY.
(a) Do a general visual inspection of the Track 4 Sensor Strut, refer to Fig. A-GBBAA
.
NOTE
: Inspection criteria are corrosion, ruptured, loose, or missing
components and attached bolts are loose, broken, or missing.
NOTE
: If damage is found, you must ensure the second attached bolt
(forward side) is not damaged (affected part numbers not listed
below). If damage is found the second attached bolt (forward side)
must be replaced also.
1
 If damage is found:
a
 Replace the damaged parts or contact AIRBUS for repair instructions
before the next flight, refer to AMM Task 27-51-45-000-801 and AMM
Task 27-51-45-400-801:
1 Sensor-Strut F5757492600000 Item (1) Discard
with
1 Sensor-Strut F5757492600000 Item 1
or
1 Sensor-Strut F5757492600200 Item (1) Discard
with
1 Sensor-Strut F5757492600200 Item 1
or
1 Bolt F5757116820000 Item (2) Discard
with
1 Bolt F5757116820000 Item 2
or
1 Bolt F5757116820200 Item (2) Discard
with
1 Bolt F5757116820200 Item 2
or
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 24
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29

@A340-500/600
SERVICE BULLETIN
1 Bolt G5757146320200 Item (2) Discard
with
1 Bolt G5757146320200 Item 2
b
 Continue to substask SUBTASK 275071-832-206 001 Inspect the RH
Track 5 Drive Station Elements Depending on the Results of the RH
Track 4 Sensor Strut Inspection .
2
 If no damage is found:
a
 Report to AIRBUS the inspection results.
b
 No further action.
c
 Repeat inspection in accordance with paragraph 1.E.2 Accomplishment
Timescale.
(6) Subtask 275071-832-206-001 - Inspect the RH Track 5 Drive Station Elements
Depending on the Results of the RH Track 4 Sensor Strut Inspection
Work Zones and Access Panels
Zone
 Access/Work location
634
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 27-54-55-000-803
Task 27-54-55-400-803
Task 27-54-56-960-801
Task 27-54-57-000-801
Task 27-54-57-400-801
Task 27-54-59-000-802
Task 27-54-59-400-802
Task 27-54-76-000-806
Task 27-54-76-400-806
Task 57-56-11-000-807
Fig. A-GBAAA
Inspection of the Drive Station Elements
Sheet 01
Sheet 02
WARNING
: BEFORE YOU START WORK, YOU MUST PUT ON A SAFETY
HARNESS AND ATTACH IT TO THE ACCESS PLATFORM. WITHOUT
A SAFETY HARNESS, YOU CAN FALL. THIS CAN KILL YOU OR
CAUSE YOU INJURY.
NOTE
: This Subtask is only required depending on the results of the RH Track 4
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 25
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 30

@A340-500/600
SERVICE BULLETIN
Sensor Strut Inspection as per SUBTASK 275071-832-205 001 Inspect
the RH Track 4 Sensor Strut .
(a) Job Set-up:
1
 Put access platform in position besides the RH Flap Track 5.
2
 Remove the Flap Track Fairing at Track 5, refer to AMM Task
57-56-11-000-807.
(b) Do a detailed inspection of the Track 5 Drive Station Elements, refer to Fig. A-
GBAAA
.
NOTE
: Inspection criteria are corrosion, ruptured, loose, or missing
components. This includes any attached bolts and nuts that are
loose, broken, or missing.
1
 Inspect the Down Drive Gearbox FIN No. 5129CV.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Down Drive Gearbox, refer to AMM Task
27-54-55-000-803 and AMM Task 27-54-55-400-803.
2
 Inspect the Down Drive Shaft FIN No. 5130CV.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Down Drive Shaft, refer to AMM Task
27-54-56-960-801.
3
 Inspect the Geared Rotary Actuator Input Gearbox FIN No. 5131CV.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Geared Rotary Actuator Input Gearbox, refer to
AMM Task 27-54-57-000-801 and AMM Task 27-54-57-400-801.
4
 Inspect the Geared Rotary Actuator Output Lever and Fork End FIN No.
5133CV.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Geared Rotary Actuator, refer to AMM Task
27-54-59-000-802 and AMM Task 27-54-59-400-802.
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 26
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 31

@A340-500/600
SERVICE BULLETIN
5
 Inspect the Drive Strut and attached bolts.
a
 If damage is found, replace or contact AIRBUS for repair instructions
before next flight.
<1> Replace the affected Drive Strut, refer to AMM Task
27-54-76-000-806 and AMM Task 27-54-76-400-806.
6
 Report inspection results to AIRBUS.
7
 Repeat the inspection in accordance with paragraph 1.E.2 Accomplishment
Timescale.
D. TEST
(1) Subtask 275071-710-201-001 - Operational Test of the Flap System
Manpower Resources
Skills
 NON SPECIFIC
NOTE
: This Service Bulletin requires the accomplishment of Tests which are
given in: SUBTASK 275071-942-201 001 Close-up . The manhours for
the tests are included in the referenced Service Bulletin subtask.
E. CLOSE-UP
(1) Subtask 275071-942-201-001 - Close-up
Manpower Resources
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 27-50-00-866-802
Task 27-54-00-710-801
(a) Remove the warning notice(s).
(b) Remove the LOCKING TOOL.
(c) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(d) Remove the access platform(s).
(e) Do the operational test of the Flap System, refer to refer to AMM Task
27-54-00-710-801.
(f) If required, retract the flaps, refer to AMM Task 27-50-00-866-802.
(g) Put the aircraft back to its initial configuration.
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 27
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 32

@A340-500/600
SERVICE BULLETIN
**CONF ALL
Z534 LH
Z634 RH
LH
RHZ633
Z533
ROTARY ACTUATOR
CROSS SHAFT
DOWN DRIVE GEARBOX
INPUT GEARBOX
A
A A
DRIVE STRUT
C C
D
LH SHOWN
RH SYMMETRICAL
ACTUATOR
FORK END
F_SB_275071_6_BAAA_01_00
Figure A-GBAAA - Sheet 01
Inspection of the Drive Station Elements
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 28
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 33

@A340-500/600
SERVICE BULLETIN
**CONF ALL
TYPICAL
DRIVE STRUT C
E
D
E
ROTARY ACTUATOR
DOWN DRIVE SHAFTINPUT GEARBOX
DOWN DRIVE
CROSS SHAFT
DRIVE STATION
DOWN DRIVE
4 5
DRIVE SHAFT
INPUT GEARBOX
CROSS SHAFT
ROTARY ACTUATOR
FIN NUMBER LIST
LH
RH
LH
RH
LH
RH
LH
RH
LH
RH
5040CV
5041CV
5119CV
5042CV
5120CV
5043CV
5121CV
5044CV
5122CV 5133CV
5055CV
5132CV
5054CV
5131CV
5053CV
5130CV
5052CV
5129CV
5051CV
5118CV
LH SHOWN
RH SYMMETRICAL
LH SHOWN
RH SYMMETRICAL
VIEW LOOKING AFT
FORK END
ACTUATOR
INPUT GEARBOX
ACTUATOR
OUTPUT LEVER
F_SB_275071_6_BAAA_02_00
Figure A-GBAAA - Sheet 02
Inspection of the Drive Station Elements
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 29
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 34

@A340-500/600
SERVICE BULLETIN
**CONF ALL
LH
RHZ633
Z533
A
A
LH SHOWN
RH SYMMETRICAL
(1)
1
(2)
2
F_SB_275071_6_BBAA_01_00
Figure A-GBBAA - Sheet 01
Inspection of the Track 4 Sensor Strut
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 30
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 35

@A340-500/600
SERVICE BULLETIN
**CONF ALL
AT TRACK 4, PERFORM A DETAILED INSPECTION OF:
DOWN DRIVE GEARBOX, DOWN DRIVE SHAFT, GEARED ROTARY
ACTUATOR (GEARBOX), GEARED ROTARY ACTUATOR (OUTPUT
LEVER AND FORK END), AND DRIVE STRUT, AT INTERVALS
FINDINGS?NO YES
NOTE:
THE PURPOSE OF FLOWCHARTS IS TO SUPPLEMENT
THE INFORMATION GIVEN IN THE PROCEDURE AND 
COMPLIANCE PARAGRAPHS AND NOT TO SERVE AS
THE PRIMARY SOURCE FOR TASKS OR COMPLIANCE
TIMES GIVEN IN THE SERVICE BULLETIN.
REPLACE THE AFFECTED PARTS
OR CONTACT AIRBUS FOR
REPAIR IF NECESSARYPERFORM A GENERAL VISUAL INSPECTIONOF THE TRACK 4 SENSOR STRUT FOR
DAMAGE, DISCONNECTION, AND ATTACHMENT 
BOLTS (LOOSE, BROKEN OR MISSING) AT
FINDINGS?NO YES
AT TRACK 5, PERFORM A DETAILED INSPECTION OF: DOWN DRIVE
GEARBOX, DOWN DRIVE SHAFT, GEARED ROTARY ACTUATOR (GEARBOX),
GEARED ROTARY ACTUATOR (OUTBOX LEVER AND FORK END) AND
DRIVE STRUT FOR DAMAGE OR DISCONNECTION
FINDINGS?NO YES
REPORT TO AIRBUS INSPECTION 
WITH FINDINGS DETAILS
REPEAT INSPECTION WITHIN REQUIRED INTERVALS IN ACCORDANCE
WITH ACCOMPLISHMENT TIMESCALE PARAGRAPH 1.E.(2)
REPLACE THE AFFECTED PARTS
OR CONTACT AIRBUS FOR
REPAIR IF NECESSARY
REPLACE THE AFFECTED PARTS
OR CONTACT AIRBUS FOR
REPAIR IF NECESSARY
GIVEN IN ACCOMPLISHMENT TIMESCALE PARAGRAPH 1.E.(2)
INTERVALS GIVEN IN ACCOMPLISHMENT
TIMESCALE PARAGRAPH 1.E.(2)
F_SB_275071_6_FAAA_01_01
Figure A-GFAAA - Sheet 01
Flowchart
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 31
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 36

@A340-500/600
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 32
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 37

@A340-500/600
SERVICE BULLETIN
Appendix 01 - Manpower Gantt Chart
**CONF ALL
For an explanation of man-hours and elapsed time, refer to the next page(s).
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 38

@A340-500/600
SERVICE BULLETIN
Appendix 01 - Manpower Gantt Chart
**CONF ALL
ELAPSED TIME ASSUMPTION SERVICE BULLETIN No A340−27−5071
GET ACCESS
MH ET/S
TOTAL MANHOURS
SB ELAPSED TIME
7.00
5.75
STEPS
2.00 2.00
50
0.50 0.50
INSPECT THE LH SENSOR STRUT 0.25 0.25
0.50 0.50
0.50 0.50
0.50 0.50
CLOSE−UP 2.50 2.50
MH
ET/S:
PER
MANHOURS
ELAPSED TIME PER STEP
NUMBER OF PERSONS
01
02
THIS CHART IS ONLY A PROPOSAL.
OPERATORS MAY DETERMINE THAT ANOTHER WAY
TO DO THE WORK IS MORE SUITABLE FOR THEM.
01
02
NOTE:
PER
1
1
1
1
1
1
1
0.25 0.251
:
:
SB ELAPSED TIME
(HOURS)
2 3 4 6
IF A VSB IS INVOLVED, THE ASSOCIATED MANHOURS
ARE NOT REFLECTED IN THIS GANTT CHART.
OF TRACK 4
1
INSPECT THE LH DRIVE STATION
ELEMENTS OF TRACK 4
INSPECT THE LH DRIVE STATION ELEMENTS OF
TRACK 5 DEPENDING ON THE RESULTS OF THE
INSPECT THE RH DRIVE STATION
ELEMENTS OF TRACK 4
INSPECT THE RH SENSOR STRUT
OF TRACK 4
LH TRACK 4 SENSOR STRUT INSPECTION
INSPECT THE RH DRIVE STATION ELEMENTS OF
TRACK 5 DEPENDING ON THE RESULTS OF THE
RH TRACK 4 SENSOR STRUT INSPECTION
F_SB_275071_6_AAAA_01_03
Figure A-GAAAA - Sheet 01
Manpower Gantt Chart
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 2
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 39

@A340-500/600
SERVICE BULLETIN
Appendix 02 - Inspection Report
**CONF ALL
The results of the inspection, including no findings, must be uploaded in accordance with ISI
00.00.00179 using the online reporting application in AirbusWorld.
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 40

@A340-500/600
SERVICE BULLETIN
Appendix 02 - Inspection Report
**CONF ALL
INSPECTION REPORT
SERVICE BULLETIN No :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A340−27−5071
DATE OF INSPECTION :
INSPECTION METHOD : VISUAL INSPECTION
VISUAL INSPECTION OF THE DRIVE STATION ELEMENTS AT TRACK 4 AND 5
INSPECTION
PARTS LISTED IN THIS
SERVICE BULLETIN
DAMAGE 
FOUND
TYPE OF FINDINGS
PART
 RESULTS  FOLLOW−UP ACTIONS
SERIAL TYPE OF
NO DAMAGE
FOUND
PART
DAMAGENUMBERNUMBER LOCATION
UPLOAD THE COMPLETED INSPECTION REPORT
SHEET IN ACCORDANCE WITH ISI 00.00.00179
F_SB_275071_6_ABAA_01_01
Figure A-GABAA - Sheet 01
Inspection Report
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 2
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 41

@A340-500/600
SERVICE BULLETIN
Service Bulletin REPORTING
TITLE: HIGH LIFT SYSTEM - OUTBOARD FLAP - VISUAL INSPECTION OF
THE DRIVE STATION ELEMENTS AT TRACK 4 AND 5 FOR
A340-500/-600 AIRCRAFT
MODIFICATION No.: None
SB Reporting status
This Service Bulletin will only be incorporated into affected customized Maintenance and Flight
Operations Products if it is duly reported to Airbus.
General information
The SB Reporting policy is published in ISI 00.00.00135. This document provides information regarding:
the SB Reporting means and benefits, the update of customized Maintenance Products and customized
Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations Products" for
further information on the update of affected Flight Operations Products.
SB Reporting procedure
Standard practice to report SB is to use the online reporting application on AirbusWorld.
Refer to ISI 00.00.00179:
- For complete information on reporting means to Airbus. Question 2 "What are the standard
practices for SB reporting?"
- If this SB requires previous or simultaneous accomplishment of other SBs, Question 3 "What about
the reporting of prerequisite Service Bulletin?"
NOTE:
 ISI 00.00.00179 covers all the frequently asked questions about SB Reporting. It is revised on a
regular basis.
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 42

@A340-500/600
SERVICE BULLETIN
QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin. The reported data
that you provide us will be used to analyse areas of difficulties and to take corrective action to further
improve the quality of our Service Bulletins.
We thank you for the time you have taken in completing this form.
(Please rate on a scale of 1 to 4, with 4 being the highest score)
- Quality rating of this SB 4321
- Quality rating of the Accomplishment Instructions 4321
- Quality rating of the Illustrations 4321
- Is this SB easy to understand ? Y/N
If you have had difficulties in the accomplishment of this SB please quote below the area(s) and give a
short description of the issue.
Planning Material Instructions
X Effectivity X Kit content X Preparation
X Reason X List of Materials Operator Supplied X Mod/Inspection
X Manpower X Industry support X Test
X References X Re-identification X Close-Up
X Publication X Tooling X Illustrations
Comments:
Operator: Date:
Name/Title:
Please return this form to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn : SEM4 Service Bulletins Management
F A X:( 3 3 )56 19 34 25 1
Or via your Resident Customer Support Office.
DATE: Apr 03/18 SERVICE BULLETIN No.: A340-27-5071
REVISION No.: 00 - Apr 03/18 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.