# Airbus Service Bulletin A340-32-4212

## Copies (5)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 05 ("U.S. DOT/FAA - Service Bulletin A340-32-4212 Rev 05"), 30 pages: PDF https://openairdocs.org/files/sha256/dd/05/dd05a4013532455ef07240a87f9786635e13e36c687c433ace277dfd55ac7fe1; text https://openairdocs.org/service-documents/airbus/a340-32-4212/file/dd05a4013532.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2014-0132; AD 2014-23-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 04 ("U.S. DOT/FAA - Service Bulletin A340-32-4212 Rev04"), 23 pages: PDF https://openairdocs.org/files/sha256/00/34/00347384a3ab190976a9b3b7eacfb0f3d389743a41e463718f609fdd911f0a3b; text https://openairdocs.org/service-documents/airbus/a340-32-4212/file/00347384a3ab.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2014-0132; AD 2014-23-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 03 ("U.S. DOT/FAA - Service Bulletin A340-32-4212 Rev03"), 24 pages: PDF https://openairdocs.org/files/sha256/12/a5/12a5a3e7bb87329c28fcb0b7efeb1fb859c5338fec8c852535ae1d527546962d; text https://openairdocs.org/service-documents/airbus/a340-32-4212/file/12a5a3e7bb87.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2014-0132; AD 2014-23-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 02 ("U.S. DOT/FAA - Service Bulletin A340-32-4212 Rev02"), 21 pages: PDF https://openairdocs.org/files/sha256/28/ad/28ada450120ab2a830abad4a8b3d890af276a5864095ef856386e33c39eb2484; text https://openairdocs.org/service-documents/airbus/a340-32-4212/file/28ada450120a.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2014-0132; AD 2014-23-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- U.S. DOT/FAA - Service Bulletin A340-32-4212 Rev 00 ("U.S. DOT/FAA - Service Bulletin A340-32-4212 Rev 00"), 18 pages: PDF https://openairdocs.org/files/sha256/00/4b/004b2e79ef70c72ef8f680089a9f39aad5d627e1c6601bd393006d7140ae62a3; text https://openairdocs.org/service-documents/airbus/a340-32-4212/file/004b2e79ef70.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2014-0132; AD 2014-23-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A340-32-4212
- Latest revision known: A340-32-4212, Revision 05, dated September 26, 2008 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/a340-32-4212

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2014-23-07](https://openairdocs.org/ad/2014-23-07.md), effective Dec 31, 2014: Revisions 01, 02, 03, 04 and 05
- [AD 2004-16-01](https://openairdocs.org/ad/2004-16-01.md), effective Aug 19, 2004: Revision 01

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a340-32-4212/proposed.md).

## Text (30 pages)

Revision 05, the newest copy. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2014-0132; AD 2014-23-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

A340A340
SERVICE BULLETIN
REVISION TRANSMITT AL SHEET
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Tel : (33) 5 61 93 33 33
Telex : AIRBU 530526F
Fax : (33) 5 61 93 42 51
MANDATORY MANDATORY MANDATORY MANDATORY
ATA SYSTEM : 32
TITLE : LANDING GEAR - MLG - INSPECTION OF THE MLG RETRACTION ACTUATOR PISTON-ROD
MODIFICATION No. : None
This page transmits Revision No. 05 of Service Bulletin No. A340-32-4212
ADDITIONAL WORK
No additional work is required by this revision for aircraft modified by any previous issue.
REASON
Revision 05 of this Service Bulletin has been issued in order to introduce a specific threshold inspection
for the piston rod PN 114256326 reidentified in accordance with Service Bulletin A340-32-4260.
The opportunity was taken to update the effectivity.
CHANGES
SUMMARY :
- REASON/DESCRIPTION/OPERA TIONAL CONSEQUENCES
. Standard sentence has been added. Reference to Piston Rod PN 114256326 has been added.
References to ADs have been amended. References to ADs have been added. Service Bulletin
Nos have been corrected.
- EFFECTIVITY
. Operators 39Z, 50Z, AEA, AIB, BWA, CXN and DRD have been deleted. Operators 13W, AAW,
CCA, DGA, FIN, MPD, S3R and VCV have been added.
- CONCURRENT REQUIREMENTS
. Service Bulletin A340-32-4260 has been added.
PLANNING INFORMA TION :
- CONCURRENT REQUIREMENTS
. 1.B. Service Bulletin A340-32-4216 has been added.
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 1 of 3
Printed in France © AIRBUS 2008 All rights reserved

### Page 2

A340A340
SERVICE BULLETIN
REVISION TRANSMITT AL SHEET
- REASON
- History
. 1.C.(1) AD references have been amended. Service Bulletin references have been corrected.
Sentence has been added.
- Objective/Action
. 1.C.(2) Standard sentence has been added.
- DESCRIPTION
. 1.D.(1)(b)2 Paragraph reference has been removed and Airworthiness Directive has been added.
. 1.D.(1)(c)1 Paragraph reference has been removed and Airworthiness Directive has been added.
. 1.D.(1)(d)2 Paragraph reference has been removed and Airworthiness Directive has been added.
. 1.D.(1)(e) Paragraph reference has been removed and Airworthiness Directive has been added.
- Accomplishment Timescale
. 1.E.(2) Revision 04 has been added. Sentence has been added.
- APPROVAL
. 1.F . Approval statement has been updated.
- REFERENCES
. 1.J. F-2003-458 becomes F-2003-459 and F-2004-086 becomes F-2004-087. AD F-2005-099,
F-2006-0301 and Service Bulletin A340-32-4260 have been added.
- INSPECTION
. 3.B.(1) Figure references have been added.
. 3.B.(1)(a)3 Paragraph reference has been removed and Airworthiness Directive has been added.
. 3.B.(1)(b)2 Paragraph reference has been removed and Airworthiness Directive has been added.
. 3.B.(1)(c)3 Paragraph reference has been removed and Airworthiness Directive has been added.
- Figure 1
. Flow Chart has been added.
- Figure 2
. Flow Chart has been added.
- Figure 3
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 2
Printed in France © AIRBUS 2008 All rights reserved

### Page 3

A340A340
SERVICE BULLETIN
REVISION TRANSMITT AL SHEET
. Flow Chart has been added.
FILING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete document.
Replace the complete document.
Put this Revision T ransmittal Sheet in front of the Service Bulletin.
HISTORY OF PREVIOUS REVISIONS
Revision 01 of this Service Bulletin was issued to add a new AD (CN) No. F-2004-086 (B) to supersede
AD (CN) No. F-2003-458 (B) and mandates this Service Bulletin. This was due to the addition of the
repetitive 7 day inspection of the complete chromed area of the piston rod. Also the opportunity was
taken to update the aircraft effectivity and clarify the aircraft configurations.
Revision 02 of this Service Bulletin was issued to show the changes in the inspection procedures and
to include the drainage of water or other fluids from the piston rod. The mandatory accomplishment
timescales were also added.
Revision 03 was issued to inform operators that:
- A one-time ultrasonic longitudinal and circumferential inspection on the full piston rod was added.
- Modification Service Bulletin references were added as a closing action.
- Accomplishment timescale was amended.
- The interval for the fluid drainage was amended.
- Effectivity was revised.
- Config. 01 was added.
Revision 04 of this Service Bulletin has been issued to remove the detailed tasks in the ’Accomplishment
Timescale’ paragraph to be replaced by reference to the AD. The opportunity was taken to update the
effectivity .
REVISION SEQUENCE
ORIGINAL : Dec 17/03
REVISION No. : 01 - Jun 16/04
REVISION No. : 02 - May 11/05
REVISION No. : 03 - Mar 13/06
REVISION No. : 04 - Jun 12/06
REVISION No. : 05 - Sep 26/08
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 3
Printed in France © AIRBUS 2008 All rights reserved

### Page 4

A340A340
SERVICE BULLETIN
This Page Intentionally Left Blank
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 4
Printed in France © AIRBUS 2008 All rights reserved

### Page 5

A340A340
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Tel : (33) 5 61 93 33 33
Telex : AIRBU 530526F
Fax : (33) 5 61 93 42 51
This summary is for information only and is
not approved for modification of the aircraft
MANDATORY MANDATORY MANDATORY MANDATORY
ATA SYSTEM : 32
TITLE : LANDING GEAR - MLG - INSPECTION OF THE MLG RETRACTION ACTUATOR PISTON-ROD
MODIFICATION No. : None
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
This Service Bulletin is published to advise all operators of A340 aircraft of the issue of Messier-Dowty
Service Bulletin No. A33/34-32-222.
A rupture of a Main Landing Gear (MLG) retraction actuator piston rod-end has occurred on an in-service
A340 aircraft. This resulted from internal corrosion and circumferential cracking around the painted upper
end of the piston rod.
A longitudinal crack has also been found on the chromed part of a retraction actuator piston-rod.
Investigations indicate that the crack started from a line of corrosion pitting within the piston rod bore.
All Operator T elex. (AOT) No. A340-32A4211 was issued to request operators to carry out an ultrasonic
inspection of the retraction actuator piston rods that have been in service for more than six years.
The Messier Dowty Service Bulletin A33/34-32-222 requires the actions that follow on the MLG retraction
actuator piston rods that have been in service for three years or more:-
- A visual inspection of the chromed area of the piston rods for cracks.
- The draining of water or other fluids from the piston rods which could freeze and cause future cracks.
- A repeat ultrasonic longitudinal inspection of the painted upper end of the piston rods for corrosion pitting
and/or circumferential cracks.
- A one-time ultrasonic longitudinal and circumferential inspection of the full length of the piston rods for
corrosion pitting and/or longitudinal and circumferential cracks.
This Service Bulletin supersedes AOT A340-32A4211.
The accomplishment of this Service Bulletin makes sure that the MLG retraction actuator rod has no cracks
and is free of any severe internal corrosion pitting that could cause cracks.
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 1 of 4
Printed in France © AIRBUS 2008 All rights reserved

### Page 6

A340A340
SERVICE BULLETIN
SUMMARY
On aircraft fitted with the piston rod PN 114256326 reidentified in accordance with Service Bulletin
A340-32-4260, the inspection threshold is increased.
Original issue of this Service Bulletin was rendered Mandatory by Airworthiness Directive (AD) (Consigne de
Navigabilite (CN)) No. F-2003-459 (B).
A second in-service piston rod rupture occurred as a result of a line of corrosion pitting within the piston-rod
bore along the chromed length. This occurrence led to a revision of the requirement for the inspection of
the piston-rods chromed area.
Following this second event a new AD (CN) F-2004-087 (B) was issued to supersede AD (CN) No.
F-2003-459(B) and to mandate this Service Bulletin at revision 01 and above.
A third in-service retraction actuator piston rupture has occurred. As with the first rupture, this failure resulted
from internal corrosion and circumferential cracking around the painted upper end of the piston rod.
Subsequently , another piston rod has been found in operation with a longitudinal crack in the chromium
plated part of the piston rod. Investigations indicate that the crack started from a line of corrosion pitting
within the piston rod bore.
Other ADs have now been issued and therefore AD (CN) No. F-2004-087(B) has been superseded by AD
(CN) No. F-2005-099 which as also now been superseded by AD (CN) No. 2006-0301.
The accomplishment of Service Bulletin A340-32-4222 Rev 01 or Service Bulletin A340-32-4213 Rev 01
cancels the requirements of this Service Bulletin.
NOTE : The accomplishment of Service Bulletin A340-32-4213 Rev 01 is the interim solution for the
piston rod actuator. Service Bulletin A340-32-4222 Rev 01 will take the piston rod actuator
to Design Service Goal.
EVALUA TION T ABLE
COMPLIANCE Mandatory CANCELS INSPECTION SB No
AD Ye s A/C OPERA TION AFFECTED No
RELIABILITY AFFECTED Ye s P AX COMFORT AFFECTED No
COST SAVING No ETOPS AFFECTED No
STRUCTURAL LIFE EXTN No VENDOR SB INVOL VED Ye s
KIT PRICE (USD) No AIRBUS kit
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 2
Printed in France © AIRBUS 2008 All rights reserved

### Page 7

A340A340
SERVICE BULLETIN
SUMMARY
EFFECTIVITY
This Service Bulletin is applicable to these operators :
13W AAW ACA AFR AJM ALK ARG AUA B3R CAL CCA CES CP A DGA DLH ETD FIN GFA IBE KAC LAN
M3R MAU MPD MSR NMB OAL P AL QAF R3L RJA S3R SAA SAS SWR T AP THT THY UAE VCV VIR
NOTE : The modification 52980H15418 is embodied in production on MSN 0643, and subsequent.
Aircraft with this modification embodied are not required to embody this Service Bulletin.
CONCURRENT REQUIREMENTS
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment of the following
Service Bulletin(s) or the equivalent production modification(s):
Service Bulletin No. A340-32-4260
REFERENCES/REPERCUSSIONS
TFU : 32.31.46.008
OEB : None
AOT : A340-32A4211
SIL : None
LIFE LIMIT : None
LINE MAINTENANCE AFFECTED : No
OTHERS : OIT 999.0129/03/CL, OIT 999.0034/04/CL
NATURE OF THE WORK
AIRCRAFT : Y es
EQUIPMENT : No
HARD : No
SOFT : No
OBRM : No
MANPOWER
Config. 01
TOTAL MANHOURS 1.0*
ELAPSED TIME (HOURS) 1.0*
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 3
Printed in France © AIRBUS 2008 All rights reserved

### Page 8

A340A340
SERVICE BULLETIN
SUMMARY
NOTE(*) For the inspection manhours, refer to the Messier-Dowty Service Bulletin No. A33/34-32-222.
MATERIAL INFORMATION
AIRCRAFT DA T A
None
APPENDICES
None
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 4
Printed in France © AIRBUS 2008 All rights reserved

### Page 9

A340A340
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Tel : (33) 5 61 93 33 33
Telex : AIRBU 530526F
Fax : (33) 5 61 93 42 51
MANDATORY MANDATORY MANDATORY MANDATORY
ATA SYSTEM : 32
TITLE : LANDING GEAR - MLG - INSPECTION OF THE MLG RETRACTION ACTUATOR PISTON-ROD
MODIFICATION No. : None
This document contains AIRBUS PROPRIET ARY INFORMA TION and shall at all times remain the property
of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with any information
contained in it. It is delivered on the express condition that said document and the information contained in
it shall be treated as confidential, shall not be used for any purpose other than that for which it is hereby
delivered. It shall not be disclosed in whole or in part to third parties and shall not be duplicated in any
manner (except for the purposes of performing the tasks described hereunder and provided that any recipient
of such document shall comply with the conditions herein), without AIRBUS’ prior written consent.
1. P LANNING INFORMATION
A. E FFECTIVITY
(1) Models
340-211 340-212 340-213 340-311 340-312 340-313
(2) Aircraft
(a) Effectivity by MSN
This Service Bulletin is applicable to aircraft MSN :
0002-0009 0011 0013-0015 0018-0029 0031-0035 0038-0041 0043 0044 0046-0049
0051-0053 0056-0058 0061 0063 0074-0076 0078-0081 0084 0085 0088-0091
0093 0094 0097 0101 0103 0104 0114 0115 0117 0123 0125 0126 0128 0129 0131
0133-0137 0139 0141 0142 0145-0147 0149-0152 0154 0156-0161 0163 0164
0166-0170 0173-0176 0178-0180 0182 0185-0187 0190 0192-0194 0196 0197
0199 0201 0202 0204 0207 0208 0210 0212-0218 0220 0221 0225 0227 0228 0233
0235-0237 0239 0242 0243 0245 0246 0252 0257 0260 0263 0264 0268 0270 0273
0274 0278 0280 0282 0292 0297 0302 0304 0307 0310 0318 0319 0321 0325 0327
0329 0331 0332 0335 0347 0352 0354 0355 0359 0363 0367 0373 0374 0377-0379
0381 0385 0387 0390 0395 0399 0402 0406 0411 0413-0415 0424 0429 0430
0433-0435 0438 0442 0446 0447 0450 0459 0467 0470 0474 0483 0528 0538 0541
0544-0546 0554 0556 0559 0561 0562 0582 0585 0590 0598
(b) Effectivity by Operator
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 1 of 19
Printed in France © AIRBUS 2008 All rights reserved

### Page 10

A340A340
SERVICE BULLETIN
The Operator/MSN relationship is provided for information only and is correct at the
time of issue in accordance with the information available to AIRBUS. Any future
changes resulting from transfer of an aircraft from one operator to another will not be
reflected in this list unless the Service Bulletin is revised for another reason.
OPERA TOR MSN
13W 0009
AAW 0151
ACA 0088 0154 0170 0175 0179 0273 0278
AFR 0029 0049 0078 0084 0168 0174 0186 0207 0210 0237 0245 0246
0260 0307 0310 0319 0373 0377 0399
AJM 0216 0257
ALK 0032 0033 0034 0367 0374
ARG 0048 0063 0074 0080 0085 0093
AUA 0169
B3R 0046
CAL 0402 0406 0411 0415 0433 0541
CCA 0192 0199 0201 0242 0243 0264
CES 0129 0131 0141 0161 0182
CP A 0123 0126 0128 0136 0137 0142 0147 0157 0160 0208 0218
0220 0227 0228 0381
DGA 0075 0081
DLH 0020 0024 0027 0028 0035 0052 0053 0056 0135 0158 0213 0233
0252 0274 0297 0304 0321 0325 0327 0335 0347 0352 0354
0355 0379 0390 0434 0447
ETD 0117
FIN 0058
GFA 0039 0040 0097 0103 0133 0212 0215 0282 0554
IBE 0005 0125 0134 0145 0146 0193 0197 0217 0221 0302 0318 0329
0332 0378 0387 0414 0459 0474 0483
KAC 0089 0090 0101 0104
LAN 0167 0359 0363 0429 0442
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 2
Printed in France © AIRBUS 2008 All rights reserved

### Page 11

A340A340
SERVICE BULLETIN
OPERA TOR MSN
M3R 0061
MAU 0076 0094 0152 0194 0268
MPD 0007 0013 0015
MSR 0156 0159 0178
NMB 0047 0051
OAL 0235 0239 0280 0292
P AL 0173 0176 0187 0196
QAF 0026 0528
R3L 0004
RJA 0014 0022 0038 0043
S3R 0204
SAA 0006 0008 0011 0018 0019 0021 0544 0582 0590
SAS 0413 0424 0430 0435 0450 0467 0470
SWR 0150 0263 0538 0545 0546 0556 0559 0561 0562 0585 0598
T AP 0041 0044 0079 0091
THT 0385 0395 0438 0446
THY 0023 0025 0057 0115 0180 0270 0331
UAE 0139 0149 0163 0166 0185 0190 0202 0236
VCV 0031
VIR 0002 0003 0114 0164 0214 0225
(c) Effectivity by MSN and Kit/Configuration
The Kits and configurations applicable to these MSNs are given at the end of this list
0002-0009 0011 0013-0015 0018-0029 0031-0035 0038-0041 0043-0044
0046-0049 0051-0053 0056-0058 0061 0063 0074-0076 0078-0081 0084-0085
0088-0091 0093-0094 0097 0101 0103-0104 0114-0115 0117 0123 0125-0126
0128-0129 0131 0133-0137 0139 0141-0142 0145-0147 0149-0152 0154 0156-0161
0163-0164 0166-0170 0173-0176 0178-0180 0182 0185-0187 0190 0192-0194
0196-0197 0199 0201-0202 0204 0207-0208 0210 0212-0218 0220-0221 0225
0227-0228 0233 0235-0237 0239 0242-0243 0245-0246 0252 0257 0260 0263-0264
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 3
Printed in France © AIRBUS 2008 All rights reserved

### Page 12

A340A340
SERVICE BULLETIN
0268 0270 0273-0274 0278 0280 0282 0292 0297 0302 0304 0307 0310 0318-0319
0321 0325 0327 0329 0331-0332 0335 0347 0352 0354-0355 0359 0363 0367
0373-0374 0377-0379 0381 0385 0387 0390 0395 0399 0402 0406 0411 0413-0415
0424 0429-0430 0433-0435 0438 0442 0446-0447 0450 0459 0467 0470 0474 0483
0528 0538 0541 0544-0546 0554 0556 0559 0561-0562 0582 0585 0590 0598
KIT No. QTY PER A/C CONFIGURA TION
None 01
NOTE : Config. 01 is valid for all the aircraft given in the effectivity of this Service
Bulletin as a standard configuration.
(3) Spares
Refer to the Messier-Dowty Service Bulletin No. A33/34-32-222.
B. C ONCURRENT REQUIREMENTS
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment of the
following Service Bulletin(s) or the equivalent production modification(s):
Service Bulletin No. A340-32-4260
C. R EASON
(1) History
A rupture of a MLG retraction actuator piston rod-end has occurred on an in-service
A340 aircraft. This resulted from internal corrosion and circumferential cracking around
the painted upper end of the piston rod.
Longitudinal cracks have also been found on the chromed part of a retraction actuator
piston-rod. Investigations indicate that the crack started from a line of corrosion pitting
within the piston rod bore.
Original issue of this Service Bulletin was rendered Mandatory by AD (CN) No. F-2003-459
(B).
A second in-service piston rod rupture occurred as a result of a line of corrosion pitting
within the piston-rod bore along the chromed length. This occurrence led to a revision of
the requirement for the inspection of the piston-rods chromed area.
Following this second event a new AD (CN) F-2004-087 (B) was issued to supersede AD
(CN) No. F-2003-459(B) and to mandate this Service Bulletin at revision 01 and above.
A third in-service retraction actuator piston rupture has occurred. As with the first rupture,
this failure resulted from internal corrosion and circumferential cracking around the painted
upper end of the piston rod.
Subsequently, another piston rod has been found in operation with a longitudinal crack in
the chromium plated part of the piston rod. Investigations indicate that the crack started
from a line of corrosion pitting within the piston rod bore.
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 4
Printed in France © AIRBUS 2008 All rights reserved

### Page 13

A340A340
SERVICE BULLETIN
All Operator T elex No. A340-32A4211 has been issued to request operators to carry out
an ultrasonic inspection of the retraction actuator piston-rods that have been in service
for more than six years.
Other ADs have now been issued and therefore AD (CN) No. F-2004-087(B) has been
superseded by AD (CN) No. F-2005-099 which as also now been superseded by AD
(CN) No. 2006-0301.
The accomplishment of Service Bulletin A340-32-4222 Rev 01 or Service Bulletin
A340-32-4213 Rev 01 cancels the requirements of this Service Bulletin.
NOTE : The accomplishment of Service Bulletin A340-32-4213 Rev 01 is the interim
solution for the piston rod actuator. Service Bulletin A340-32-4222 Rev 01 will
take the piston rod actuator to Design Service Goal.
(2) Objective/Action
This Service Bulletin is published to advise all operators of A340 aircraft of the issue of
Messier-Dowty Service Bulletin No. A33/34-32-222.
The Messier-Dowty Service Bulletin A33/34-32-222 requires the actions that follow on the
MLG retraction actuator piston rods that have been in service for three years or more:-
- A visual inspection of the chromed area of the piston rods for cracks.
- The draining of water or other fluids from the piston rods which could freeze and cause
future cracks.
- A repeat ultrasonic longitudinal inspection of the painted upper end of the piston rods for
corrosion pitting and/or circumferential cracks.
- A one-time ultrasonic longitudinal and circumferential inspection of the full length of the
piston rods corrosion pitting and/or longitudinal and circumferential cracks.
(3) Advantages
The accomplishment of this Service Bulletin makes sure that the MLG retraction actuator
rod has no cracks and is free of any severe internal corrosion pitting that could cause cracks.
This Service Bulletin supersedes AOT A340-32A4211.
On aircraft fitted with the piston rod PN 114256326 reidentified in accordance with Service
Bulletin A340-32-4260, the inspection threshold is increased.
(4) Operational/Maintenance Consequences
None
D. D ESCRIPTION
T o accomplish this Service Bulletin it is necessary to:
(1) Config. 01
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 5
Printed in France © AIRBUS 2008 All rights reserved

### Page 14

A340A340
SERVICE BULLETIN
(a) Get access to the MLG (LH and RH) retraction actuator.
NOTE : It is not necessary to raise the aircraft on jacks for this inspection.
(b) Do a DVI of the chromed part of the retraction actuator piston rod for cracks in
accordance with the Messier-Dowty Service Bulletin No. A33/34-32-222.
1 If one or more cracks are found during the DVI, replace the actuator BEFORE
THE NEXT FLIGHT .
2 If no cracks are found, do a repeat DVI at the specified intervals given in the
Airworthiness Directive.
3 In the event of findings during the DVI, the piston rod vent hole should be
sealed to retain the contents of the internal volume, before the removal and
the return of the retraction actuator in accordance with the Messier-Dowty
Service Bulletin No. A33/34-32-222.
4 Report all retraction actuators rejected during the DVI in accordance with the
instructions in Messier-Dowty Service Bulletin No. A33/34-32-222.
(c) Drain the fluid from the retraction actuator piston rod and seal the vent hole in
accordance with the Messier-Dowty Service Bulletin No. A33/34-32-222.
1 Repeat the draining and sealing of the vent hole procedure at the specified
intervals given in the Airworthiness Directive.
2 Report the results including nil results of the retraction actuator draining using the
proforma at Appendix C of Messier-Dowty Service Bulletin No. A33/34-32-222.
(d) Do an ultrasonic inspection of the upper painted area of the retraction actuator
piston rod for indications of cracks in accordance with the Messier-Dowty Service
Bulletin No. A33/34-32-222 Appendix A.
1 If indications of cracks are found during the ultrasonic inspection:
a Replace the retraction actuator WITHIN THE NEXT 10 FLIGHTS, depending
on the inspection results in accordance with the Messier-Dowty Service
Bulletin No. A33/34-32-222 Appendix A.
or
b Replace the retraction actuator BEFORE THE NEXT FLIGHT , depending on
the inspection results in accordance with the Messier-Dowty Service Bulletin
No. A33/34-32-222 Appendix A.
2 If no cracks are found, do a repeat ultrasonic inspection at the specified intervals
given in the Airworthiness Directive.
3 If a finding requiring the retraction actuator removal is made during the ultrasonic
inspection, and the piston rod has not yet been drained, the piston rod vent
hole should be re-sealed to retain the contents of the internal volume, before
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 6
Printed in France © AIRBUS 2008 All rights reserved

### Page 15

A340A340
SERVICE BULLETIN
the removal and the return of the retraction actuator in accordance with the
Messier-Dowty Service Bulletin No. A33/34-32-222.
4 Report the results of the ultrasonic inspection (regardless of findings) using the
proforma at Appendix C of Messier-Dowty Service Bulletin No. A33/34-32-222.
(e) Do a one-time ultrasonic inspection of the chromed part of the retraction actuator
piston rods within the specified threshold given in the Airworthiness Directive,
and in accordance with the Messier-Dowty Service Bulletin No. A33/34-32-222
Appendix E and F .
1 If indications of cracks are found during the ultrasonic inspection:
a Replace the retraction actuator WITHIN THE NEXT 10 FLIGHTS, depending
on the inspection results in accordance with the Messier-Dowty Service
Bulletin No. A33/34-32-222 Appendix E and F .
or
b Replace the retraction actuator BEFORE THE NEXT FLIGHT , depending
on the inspection results in accordance with the Messier-Dowty Service
Bulletin No. A33/34-32-222 Appendix E and F .
2 If a finding requiring the retraction actuator removal is made during the ultrasonic
inspection, and the piston rod has not yet been drained, the piston rod vent
hole should be re-sealed to retain the contents of the internal volume, before
the removal and the return of the retraction actuator in accordance with the
Messier-Dowty Service Bulletin No. A33/34-32-222.
3 Report the results of the one-time ultrasonic longitudinal and circumferential
inspection (regardless of findings) using the proforma at Appendix C of
Messier-Dowty Service Bulletin No. A33/34-32-222.
E. C OMPLIANCE
(1) Classification
Mandatory
(2) Accomplishment Timescale
Accomplishment of this Service Bulletin has been rendered mandatory by the issue of an
Airworthiness Directive (AD) published by the European Aviation Safety Agency (EASA).
The AD must be used as the reference document for the mandatory accomplishment
timescale.
It is anticipated that a revision to the AD will be issued to introduce an increased inspection
threshold for piston rod PN 114256326 reidentified in accordance with Service Bulletin
A340-32-4260.
F. A PPROVAL
Approved under EASA Design Organisation Approval No. EASA 21J.031.
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 7
Printed in France © AIRBUS 2008 All rights reserved

### Page 16

A340A340
SERVICE BULLETIN
If an aircraft listed in the effectivity has a modification or repair embodied that is not of AIRBUS
origin, and which affects the content of this Service Bulletin, the operator is responsible for
obtaining approval by its airworthiness authority for any adaptation necessary before incorporation
of the Service Bulletin.
G. M ANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labour cost to do
the work. These estimates assume that the work will be done by experienced personnel, and may
need to be revised upwards to suit operator’s circumstances. The estimates do not include the
time to prepare, plan or inspect the work. Manufacture and procurement of parts and tools, drying
times for paints, sealants, etc, and general administration work are also not included.
Config. 01
Get access 0.5
Visual inspection *
Drain Fluid from Piston Rod *
Ultrasonic inspection *
One-time ultrasonic inspection *
Close up 0.5
TOTAL MANHOURS 1.0
ELAPSED TIME (HOURS) 1.0
NOTE(*) For the preparation and inspection man-hours refer to the Messier-Dowty Service
Bulletin A33/34-32-222.
H. W EIGHT AND BALANCE
Not changed
I. E LECTRICAL LOAD DATA
Not changed
J. R EFERENCES
Airworthiness Directive (AD) : F-2003-459 (B) F-2004-087 (B)
F-2005-099 F-2006-0301
Aircraft Maintenance Manual (AMM) : 12-34-24 32-12-00 32-31-46
ESPM : 20-55-00
All Operator T elex (AOT) A340-32A4211
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 8
Printed in France © AIRBUS 2008 All rights reserved

### Page 17

A340A340
SERVICE BULLETIN
Messier-Dowty Service Bulletin (VSB) A33/34-32-222
Operator Information T elex (OIT) 999.0129/03/CL999.0034/04/CL
Service Bulletin A340-32-4213 Rev 01
Service Bulletin A340-32-4222 Rev 01
Service Bulletin A340-32-4260
K. P UBLICATIONS AFFECTED
None
L. I NTERCHANGEABILITY/MIXABILITY
None
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 9
Printed in France © AIRBUS 2008 All rights reserved

### Page 18

A340A340
SERVICE BULLETIN
This Page Intentionally Left Blank
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 10
Printed in France © AIRBUS 2008 All rights reserved

### Page 19

A340A340
SERVICE BULLETIN
2. M ATERIAL INFORMATION
A. M ATERIAL - PRICE AND AVAILABILITY
(1) Material
If replacement parts are required refer to the Messier-Dowty Service Bulletin No.
A33/34-32-222.
(2) Price and Availability
None
B. I NDUSTRY SUPPORT INFORMATION
Refer to the Messier-Dowty Service Bulletin No. A33/34-32-222 for the industry support terms.
C. L IST OF COMPONENTS
None
D. L IST OF MATERIALS - OPERATOR SUPPLIED
(1) Consumable Materials
DESCRIPTION REFERENCE TO CML QTY PER A/C INST/DISP
MA T No.
Cleaning agent Mat. No. 11-026 As required
(2) Components
None
E. P ARTS TO BE RE-IDENTIFIED BY THE OPERATOR
None
F. T OOLING - PRICE AND AVAILABILITY
Refer to the Messier-Dowty Service Bulletin No. A33/34-32-222.
G. S PECIAL TOOLS
Refer to the Messier-Dowty Service Bulletin No. A33/34-32-222.
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 11
Printed in France © AIRBUS 2008 All rights reserved

### Page 20

A340A340
SERVICE BULLETIN
This Page Intentionally Left Blank
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 12
Printed in France © AIRBUS 2008 All rights reserved

### Page 21

A340A340
SERVICE BULLETIN
3. A CCOMPLISHMENT INSTRUCTIONS
A. G ENERAL
WARNING : MAKE SURE THA T THE SAFETY DEVICES AND WARNING NOTICES ARE IN
POSITION BEFORE YOU ST ART A T ASK ON OR NEAR:
- THE FLIGHT CONTROLS
- THE FLIGHT CONTROL SURFACES
- THE LANDING GEAR AND RELA TED DOORS
- COMPONENTS THA T MOVE.
WARNING : MAKE SURE THA T THE GROUND SAFETY LOCKS ARE CORRECTL Y
INST ALLED ON THE LANDING GEAR. THIS PREVENTS UNWANTED
MOVEMENT OF THE LANDING GEAR.
WARNING : MAKE SURE THA T YOU OBEY ALL WARNINGS AND THE CAUTIONS INCLUDED
IN THE REFERENCED PROCEDURES.
CAUTION : ALWAYS OBEY THE PRECAUTIONS THA T FOLLOW TO KEEP ELECTRICAL
WIRING IN A SA TISFACTORY CONDITION (ELECTRICALL Y AND MECHANICALL Y
SERVICEABLE). WHEN YOU DO MAINTENANCE WORK, REP AIRS OR
MODIFICA TIONS, ALWA YS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC; AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARL Y REMOVE ALL SHAVINGS, UNWANTED MA TERIAL AND OTHER
CONT AMINA TION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONT AMINA TION AND
DAMAGE TO THE ELECTRICAL WIRING INST ALLA TION.
IN CASE OF CONT AMINA TION REFER TO ESPM 20-55-00, CLEANING.
(1) Preparation
(a) Config. 01
1 Make sure that the aircraft is electrically grounded (Refer to AMM 12-34-24,
Page block 201).
2 Open and safety the main gear doors (Refer to AMM 32-12-00, Page block 201).
3 Put access steps in position, as required.
4 Make sure that the piston rods of the retraction actuators are clean, use Cleaning
agent (Mat. No. 11-026), as required.
(2) Standard Practices
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 13
Printed in France © AIRBUS 2008 All rights reserved

### Page 22

A340A340
SERVICE BULLETIN
None
B. I NSPECTION
(1) Config. 01
Refer to Figure 1
Refer to Figure 2
Refer to Figure 3
(a) MLG (LH and RH) Retraction Actuator - DVI of the piston rod:
1 Do a DVI of the chromed part of the fully extended retraction actuator piston
rod for cracks in accordance with the Messier-Dowty Service Bulletin No.
A33/34-32-222.
2 If one or more cracks are found during the visual inspection, replace the
retraction actuator BEFORE THE NEXT FLIGHT (Refer to AMM 32-31-46,
Page block 401).
3 If no cracks are found, do a repeat visual inspection at the specified intervals
given in the Airworthiness Directive.
4 If cracks are found, during the visual inspection, the piston rod vent hole should
be sealed to retain the contents of the internal volume, before the removal and
the return of the retraction actuator in accordance with the Messier-Dowty
Service Bulletin No. A33/34-32-222.
5 Report all retraction actuators rejected during the visual inspection in accordance
with the instructions in Messier-Dowty Service Bulletin No. A33/34-32-222.
(b) MLG (LH and RH) Retraction Actuator - Drain the fluid from the piston rod and
seal the vent hole:
1 Drain the fluid from the retraction actuator piston rod and seal the vent hole in
accordance with the Messier-Dowty Service Bulletin No. A33/34-32-222.
2 Repeat the draining and sealing of the vent hole procedure at the specified
intervals given in the Airworthiness Directive.
3 Report the results of the retraction actuator draining using the proforma in
Appendix C of Messier-Dowty Service Bulletin No. A33/34-32-222.
(c) MLG (LH and RH) Retraction Actuator - Ultrasonic longitudinal inspection of the
painted area of the piston rod:
1 Do an ultrasonic longitudinal inspection of the upper painted area of the piston
rods surface, for indications of cracks in accordance with the Messier-Dowty
Service Bulletin No. A33/34-32-222.
2 If indications of cracks are found during the ultrasonic inspection:
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 14
Printed in France © AIRBUS 2008 All rights reserved

### Page 23

A340A340
SERVICE BULLETIN
a Replace the retraction actuator WITHIN THE NEXT 10 FLIGHTS, depending
on the inspection results in accordance with the Messier-Dowty Service
Bulletin No. A33/34-32-222 (Refer to AMM 32-31-46, Page block 401).
or
b Replace the retraction actuator BEFORE THE NEXT FLIGHT , depending on
the inspection results in accordance with the Messier-Dowty Service Bulletin
No. A33/34-32-222 (Refer to AMM 32-31-46, Page block 401).
3 If no cracks are found, do a repeat ultrasonic longitudinal inspection at the
specified intervals given in the Airworthiness Directive.
4 If a finding requiring the retraction actuator removal is made during the ultrasonic
longitudinal inspection, and the piston rod has not yet been drained, the
piston rod vent hole should be re-sealed. This will retain the contents of the
internal volume, during the removal and the return of the retraction actuator in
accordance with the Messier-Dowty Service Bulletin No. A33/34-32-222.
5 Report the results of the ultrasonic longitudinal inspection (regardless of
findings) using the proforma at Appendix C of Messier-Dowty Service Bulletin
No. A33/34-32-222.
(d) MLG (LH and RH) Retraction Actuator - One-time ultrasonic longitudinal and
circumferential inspection of the full length of the piston rod:
1 Do an ultrasonic longitudinal and circumferential inspection of the chromed area
(full length) of the piston rods for indications of cracks, in accordance with the
Messier-Dowty Service Bulletin No. A33/34-32-222.
2 If indications of cracks are found during the ultrasonic longitudinal and
circumferential inspection:
a Replace the retraction actuator WITHIN THE NEXT 10 FLIGHTS, depending
on the inspection results in accordance with the Messier-Dowty Service
Bulletin No. A33/34-32-222 (Refer to AMM 32-31-46, Page block 401).
or
b Replace the retraction actuator BEFORE THE NEXT FLIGHT , depending on
the inspection results in accordance with the Messier-Dowty Service Bulletin
No. A33/34-32-222 (Refer to AMM 32-31-46, Page block 401).
3 If a finding requiring the retraction actuator removal is made during the ultrasonic
longitudinal and circumferential inspection, and the piston rod has not yet
been drained, the piston rod vent hole should be re-sealed. This will retain
the contents of the internal volume, during the removal and the return of the
retraction actuator in accordance with the Messier-Dowty Service Bulletin
No. A33/34-32-222.
4 Report the results of the ultrasonic longitudinal and circumferential inspection
(regardless of findings) using the proforma at Appendix C of Messier-Dowty
Service Bulletin No. A33/34-32-222.
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 15
Printed in France © AIRBUS 2008 All rights reserved

### Page 24

A340A340
SERVICE BULLETIN
C. T EST
None
D. C LOSE UP
(1) Config. 01
(a) Make sure that the work area is clean and clear of tools and other items of equipment.
(b) Remove the access steps.
(c) Close the main gear doors (Refer to AMM 32-12-00, Page block 201).
E. D OCUMENTATION
Write in the applicable aircraft records that you have done all the work given in the Service Bulletin.
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 16
Printed in France © AIRBUS 2008 All rights reserved

### Page 25 (OCR)

© A340
SERVICE BULLETIN
INSPECTION OF RETRACTION ACTUATOR
PISTON ROD PN 114256326 THAT
ARE IN SERVICE FOR MORE
THAN 6 YEARS
INSPECTION OF RETRACTION ACTUATOR
PISTON ROD PN 114256309 OR
114256321 THAT ARE IN SERVICE
FOR MORE THAN 3 YEARS
PERFORM A DETAILED VISUAL INSPECTION
OF THE COMPLETE CHROMED AREA
OF THE PISTON ROD (LH & RH)
REPORT ALL RETRACTION
ACTUATORS REJECTED DURING
DVI IAW VSB A33/34-32-222
CRACK FOUND ON
YES  THE VISIBLE CHROMED AREA  NO
IN FULLY EXTENDED
POSITION
REPLACE RETRACTION ACTUATOR  PISTON ROD PASSED INSPECTION
BEFORE NEXT FLIGHT  REPEAT INSPECTION AT SPECIFIED
INTERVAL GIVEN IN THE AD
NOTE: NO FURTHER REPEAT VISUAL INSPECTION IS REQUIRED AFTER ACCOMPLISHMENT OF DRAINAGE
OF THE FLUID FROM THE PISTON, IN ADDITION TO THE ONE-TIME-ULTRASONIC NDT INSPECTION
OF THE FULL LENGTH OF THE PISTON REFER TO FLOW CHART 3.
F_SB_324212_7_AAXX_01_02
Figure 1, Sheet 1
Config. 01: Flow Chart, 1
DATE : Dec 17/03  SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08  Page : 17
Printed in France © AIRBUS 2008 All rights reserved

### Page 26 (OCR)

© A340
SERVICE BULLETIN
INSPECTION OF RETRACTION ACTUATOR
PISTON ROD PN 114256326 THAT
ARE IN SERVICE FOR MORE
THAN 6 YEARS
INSPECTION OF RETRACTION ACTUATOR
PISTON ROD PN 114256309 OR
114256321 THAT ARE IN SERVICE
FOR MORE THAN 3 YEARS
PERFORM AN NDT ULTRASONIC INSPECTION
OF THE UPPER END OF THE PISTON ROD
PERFORM PISTON ROD FLUID  (REF.VSB A33/34-32-222)
DRAINAGE AND SEAL THE
VENT HOLE ( VSB A33/34-
32-222)
NDT SHOWS AN
REPEAT DRAINAGE AT  INDICATION BELOW 75% FSH  YES
SPECIFIED INTERVAL  AND BETWEEN 5 AND 7
GIVEN IN THE AD  TIME BASE
NO
NDT SHOWS AN
YES  INDICATION BETWEEN 75% AND 90%
FSH AND BETWEEN 5 AND 7
ON THE TIME BASE
REPLACE THE RETRACTION
ACTUATOR WITHIN THE NEXT
10 LANDINGS AND CONTACT AIRBUS  NO
REPORT RESULTS OF ULTRASONIC
INSPECTION (REGARDLESS OF
FINDINGS) IAW VSB A33/34-32-222
NDT SHOWS AN
YES  INDICATION ABOVE 90% FSH  NO
AND 5 AND 7 IN
TIME BASE
PISTON ROD PASSED INSPECTION
REPLACE RETRACTION ACTUATOR  REPEAT INSPECTION AT SPECIFIED
BEFORE NEXT FLIGHT  INTERVAL GIVEN IN THE AD
NOTE: ACCOMPLISHMENT OF DRAINAGE OF THE FLUID FROM THE PISTON IN ADDITION TO THE ONE-TIME
ULTRASONIC NDT INSPECTION OF THE FULL LENGTH OF THE PISTON AS DEFINED IN FLOW CHART 3,
CANCEL THE REPEAT VISUAL INSPECTION REQUIREMENT AS DEFINED IN FLOW CHART 1.
F_SB_324212_7_ACXX_01_02
Figure 2, Sheet 1
Config. 01: Flow Chart, 2
DATE: Dec 17/03  SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08  Page : 18
Printed in France © AIRBUS 2008 All rights reserved

### Page 27 (OCR)

© A340
SERVICE BULLETIN
INSPECTION OF RETRACTION ACTUATOR PISTON
ROD PN 114256326 THAT ARE IN SERVICE
FOR MORE THAN 6 YEARS
INSPECTION OF RETRACTION ACTUATOR PISTON
ROD PN 114256309 OR 114256321 THAT
ARE IN SERVICE FOR MORE THAN 3 YEARS
REPORT RESULTS OF  ONE TIME ULTRASONIC  ONE TIME ULTRASONIC INSPECTIONS (BOTH
ONE TIME ULTRASONIC  CIRCUMFERENTIAL NDT  CIRCUMFERENTIAL AND LONGITUDINAL)
LONGITUDINAL AND  INSPECTION OF THE  AT GRACE PERIOD GIVEN IN THE AD
CIRCUMFERENTIAL  FULL LENGTH CHROMED
INSPECTION  PART OF THE PISTON ROD
(REGARDLESS OF  ONE TIME ULTRASONIC LONGITUDINAL NDT
FINDINGS) IAW VSB  INSPECTION OF THE FULL LENGTH
A33/34-32-222  OF THE PISTON ROD
NDT SHOWS AN
INDICATION BELOW 75% FSH
AND BETWEEN 7 AND 9.5  NDT SHOWS AN
INDICATION BELOW 75% FSH
TIME BASE
AND BETWEEN 5 AND 7
TIME BASE
YES
NDT SHOWS AN  NDT SHOWS AN
INDICATION BETWEEN 75 AND 90%  NO  INDICATION BETWEEN 75 AND 90%
FSH AND BETWEEN 7 AND 9.5  FSH AND BETWEEN 5 AND 7
TIME BASE  ON THE TIME BASE
NO
NO  NO
NDT SHOWS AN  NDT SHOWS AN
INDICATION ABOVE 90% FSH  INDICATION ABOVE 90% FSH
AND BETWEEN 7 AND 9.5 IN  AND BETWEEN 5 AND 7 IN
TIME BASE  TIME BASE
YES
YES
PISTON ROD
YES  PASSED  YES
INSPECTION
REPLACE THE RETRACTION  REPLACE THE RETRACTION
ACTUATOR WITHIN THE  REPLACE RETRACTION  REPLACE RETRACTION  ACTUATOR WITHIN THE
NEXT 10 LANDINGS AND  ACTUATOR BEFORE  ACTUATOR BEFORE  NEXT 10 LANDINGS AND
CONTACT AIRBUS  NEXT FLIGHT  NEXT FLIGHT  CONTACT AIRBUS
NOTE: I ACCOMPLISHMENT OF DRAINAGE OF THE FLUID FROM THE PISTON IN ADDITION TO THE ONE-TIME
ULTRASONIC NDT INSPECTION OF THE FULL LENGTH OF THE PISTON AS DEFINED IN FLOW CHART 3,
CANCEL THE REPEAT VISUAL INSPECTION REQUIREMENT AS DEFINED IN FLOW CHART 1.
F_SB_324212_7_AEXX_01_02
Figure 3, Sheet 1
Config. 01: Flow Chart, 3
DATE : Dec 17/03  SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08  Page : 19
Printed in France © AIRBUS 2008 All rights reserved

### Page 28

A340A340
SERVICE BULLETIN
This Page Intentionally Left Blank
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 20
Printed in France © AIRBUS 2008 All rights reserved

### Page 29

A340A340
SERVICE BULLETIN
REPORTING SHEET
TITLE : LANDING GEAR - MLG - INSPECTION OF THE MLG RETRACTION ACTUATOR PISTON-ROD
MODIFICATION No. : None
Please complete the appropriate item (A or B):
A - SB W ILL BE embodied .................................................................. YES/NO (if NO please comment)
If YES, aircraft concerned (as per SB effectivity by default) and planned dates (month/year) of embodiement:
.............................................................................................................................................................................
.............................................................................................................................................................................
B - SB H AS BEEN embodied on aircraft: ............................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
Operator comments:.............................................................................................................. ..............................
.............................................................................................................................................................................
.............................................................................................................................................................................
From Airline: ........................................................................................................................................................
Name/Title: ..........................................................................................................................................................
Signature:..................... Date: .....................................................
If operational documentation is affected (see Paragraph 1.K of this SB): If information is needed prior to next
normal revision or prior to SB embodiment, please indicate required service(s):
Either : Advance data................................................................................... YES/NO
Or : Intermediate/T emporary revision ..................................................... YES/NO
Important Information: This SB will only be incorporated in your maintenance and operational documentation
if this sheet is returned to Airbus and signed by a duly authorised representative. With the next feasible
revision, this will result in
- updating of maintenance documentation to show pre and post SB data.
- updating of maintenance and operational documentation to show post SB data
after embodiment.
If this SB requires previous or simultaneous accomplishment of other SBs, Airbus shall automatically include
them in the manual revisions. Refer to SIL 00-037 for detailed information.
Please return this completed sheet to:
AIRBUS
CUSTOMER SERVICES DIRECTORA TE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn: SEDCC1 T echnical Data and Documentation Services
FAX: (+33) 5 61 93 28 06
e-mail: sb.reporting@airbus.com
Or via your Resident Customer Support Office.
Alternatively, SB lists via letters or fax are also accepted.
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 1 of 1
Printed in France © AIRBUS 2008 All rights reserved

### Page 30

A340A340
SERVICE BULLETIN
REPORTING QUALITY
TITLE : LANDING GEAR - MLG - INSPECTION OF THE MLG RETRACTION ACTUATOR PISTON-ROD
MODIFICATION No. : None
Use this form to tell us what is your perception of the quality of this Service Bulletin.The reported data that you
provide us will be used to analyse areas of difficulties and to take corrective action to futher improve the quality
of our Service Bulletins.
We thank you for the time you have taken in completing this form.
(Please rate on a scale of 1 to 4, with 4 being the highest score)
-Quality rating of this SB 4 3 2 1
-Quality rating of the Accomplishment Instructions 4 3 2 1
-Quality rating of the Illustrations 4 3 2 1
-Is this SB easy to understand ? Y / N
If you have had difficulties in the accomplishment of this SB please quote below the area(s) and give a short
description of the issue.
Planning Material Instructions
X Effectivity X Kit Content X Preparation
X Reason X List of Materials X Mod/Inspection
X Manpower Operator Supplied X T est
X References X Re-identification X Close-up
X Publication X T ooling X Illustrations
Comments :
Operator : Date:
Name/Title :
Please return this form to:
AIRBUS
CUSTOMER SERVICES DIRECTORA TE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn: SEMB Service Bulletins Management
FAX: (+33) 5 61 93 42 51
Or via your Resident Customer Support Office.
DA TE : Dec 17/03 SERVICE BULLETIN No. : A340-32-4212
REVISION No. : 05 - Sep 26/08 Page : 1 of 1
Printed in France © AIRBUS 2008 All rights reserved

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
