# Airbus Service Bulletin A340-32-4213

Copy: Revision 01 ("U.S. DOT/FAA - Service Bulletin A340-32-4213 Rev 01"), 23 pages: PDF https://openairdocs.org/files/sha256/30/0f/300fcc39b2e0b059fe038de8ddd1c98feab8d2037ca35dba653aaa7fa9a3c933; text https://openairdocs.org/service-documents/airbus/a340-32-4213/file/300fcc39b2e0.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2014-0132; AD 2014-23-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A340-32-4213
- Latest revision known: A340-32-4213, Revision 01, dated September 16, 2005 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/a340-32-4213

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2014-23-07](https://openairdocs.org/ad/2014-23-07.md), effective Dec 31, 2014: Revision 01

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a340-32-4213/proposed.md).

## Text (23 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2014-0132; AD 2014-23-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@ A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
7 DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page : 1 of 3
Printed in FRANCE © AIRBUS, 2005 All rights reserved
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Tel : (33) 5 61 93 33 33
Telex : AIRBU 530526F
Fax : (33) 5 61 93 42 51
ATA SYSTEM : 32
TITLE : LANDING GEAR - NORMAL EXTENSION AND RETRACTION - INTRODUCE A SOLID
PISTON ROD ON THE MLG RETRACTION ACTUATOR
MODIFICATION No. : 52424H15395 54647H15711
This page transmits Revision No. 01 of Service Bulletin No. A340-32-4213
ADDITIONAL WORK
Additional work is required by this revision for aircraft modified by any
previous issue.
REASON
The additional work introduces modification No. 54647H15711 which requires
operators to re-identify the retraction actuator.
This revision has also been issued to update the
interchangeability/mixability paragraph, to agree with the latest issue of
Messier-Dowty Service Bulletin A33/34/32-223 The manhours have also been
updated to include the removal and installation of the Retraction Actuator.
Config. 01 also added.
The opportunity has been taken to update the aircraft effectivity.
CHANGES
SUMMARY :
— REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
.  Information updated. Modification classification table added.
— EFFECTIVITY
.  Operators AEA and DRD added. Operators AIB, BOE, and BUB deleted.
— MANPOWER
.  Manhours revised to include the removal and installation of the
retraction actuator. Additional work manhours added.
PLANNING INFORMATION :
— EFFECTIVITY

### Page 2

@ A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page :
Printed in FRANCE © AIRBUS, 2005 All rights reserved
. 1.A. Operators AEA and DRD added. Operators AIB, BOE and BUB deleted.
Aircraft effectivity updated. Effectivity by MSN and Kit/Configuration
updated. Spares updated to agree with the latest issue of Messier-Dowty
Service Bulletin A33/34-32-223.
— REASON
— Objective/Action
. 1.C.(2) Information updated.
— DESCRIPTION
. 1.D. Additional work added into the description.
— COMPLIANCE
. 1.E. Additional work accomplishment timescale added.
— APPROVAL
. 1.F. Approval statement updated.
— MANPOWER
. 1.G. Manhours revised to include the removal and installation of the
retraction actuator. Additional work manhours added.
— REFERENCES
. 1.J. AMM 12-34-24 added. Electrical Standard Practices Manual (ESPM)
added. Service Bulletin A340-32-4222 added.
— INTERCHANGEABILITY/MIXABILITY
. 1.L. Interchangeability table updated to agree with the latest issue of
Messier-Dowty Service Bulletin A33/34-32-223. Notes revised.
ACCOMPLISHMENT INSTRUCTIONS :
— GENERAL
. 3.A. Caution added.
— Preparation
. 3.A.(1) Step added to electrically ground the aircraft.
— MODIFICATION
. 3.B.(1)(d) Steps added to include the additional work.
— CLOSE-UP
. 3.D. Close up sequence improved.
2

### Page 3

@ A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page :
Printed in FRANCE © AIRBUS, 2005 All rights reserved
FILING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a
complete document. Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
HISTORY OF PREVIOUS REVISIONS
No previous revisions.
REVISION SEQUENCE
ORIGINAL : May 26/04
REVISION No. : 01 — Sep 16/05
3

### Page 4

@ A340
SERVICE BULLETIN
SUMMARY
7 DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page : 1 of 3
Printed in FRANCE © AIRBUS, 2005 All rights reserved
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Tel : (33) 5 61 93 33 33
Telex : AIRBU 530526F
Fax : (33) 5 61 93 42 51
This summary is for information only
and is not approved for modification of the aircraft
ATA SYSTEM : 32
TITLE : LANDING GEAR - NORMAL EXTENSION AND RETRACTION - INTRODUCE A SOLID
PISTON ROD ON THE MLG RETRACTION ACTUATOR
MODIFICATION No. : 52424H15395 54647H15711
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
This Service Bulletin is published to advise all operators of A340 aircraft of
the issue of Messier-Dowty Service Bulletin A33/34-32-223.
Fracture of the piston rod for the Main Landing Gear (MLG) retraction-actuator
has occurred on an in-service A330 aircraft, close to the spherical bearing.
Additionally another piston rod has fractured, due to a longitudinal crack. Both
failures are corrosion related.
The All Operator Telex (AOT) No.A340-32A4211 has been issued to request
operators to carry out an ultrasonic inspection of the piston rod for the MLG
retraction-actuator that have been in service for more than three years. The AOT
is being followed up by the issue of Inspection Service Bulletin (ISB)
A340-32-4212 which covers the Messier-Dowty Service Bulletin A33/34-32-222.
Which additionally requests a detailed visual inspection.
This Service Bulletin introduces a MLG retraction-actuator which has a solid
piston rod. This new design is only intended for interim use to alleviate supply
demands, it will not be installed on production aircraft. It is only intended to
be installed to prevent an AOG situation. The solid piston rod is life limited
to MPD Section 9-1. An improved design of hollow piston rod with a higher
standard of corrosion protection will be introduced to replace the existing
design through SB A340-32-4222. This Service Bulletin is superseded by SB
A340-32-4222.
Accomplishment of this Service Bulletin will prevent a possible AOG situation
when a MLG retraction-actuator fails the inspection requirements of ISB
A340-32-4212 and there are no other spare pre-modification MLG
retraction-actuators available.
EVALUATION TABLE
COMPLIANCE Recommended CANCELS INSPECTION SB Yes
POTENTIAL AD No A/C OPERATION AFFECTED No

### Page 5

@ A340
SERVICE BULLETIN
SUMMARY
DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page :
Printed in FRANCE © AIRBUS, 2005 All rights reserved
As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics
affecting the airworthiness of the product. All other changes are major changes.
EFFECTIVITY
This Service Bulletin is applicable to these operators :
39Z 50Z ACA AEA AFR AJM ALK ARG AUA B3R BWA CAL CES CPA CRX CXN DLH DRD ETD GFA
IBE KAC LAN M3R MAU MSR OAL PAL QAF R3L RJA SAA SAS TAP THT THY UAE VIR
NOTE : This modification is applicable by Service Bulletin only.
CONCURRENT REQUIREMENTS
None
REFERENCES/REPERCUSSIONS
TFU : None
OEB : None
AOT : A340-32A4211
SIL : None
LIFE LIMIT : Yes *
LINE MAINTENANCE AFFECTED : No
OTHERS : None
NOTE : * The new solid piston rod is Life Limited to MPD Section 9-1.
NATURE OF THE WORK
AIRCRAFT : Yes
EQUIPMENT : Yes
HARD : No
SOFT : No
OBRM : No
RELIABILITY AFFECTED No PAX COMFORT AFFECTED No
COST SAVING No ETOPS AFFECTED No
STRUCTURAL LIFE EXTN No VENDOR SB INVOLVED Yes
KIT PRICE (USD) See SB
MODIFICATION CLASSIFICATION
MAJOR 52424H15395
MINOR 54647H15711
EVALUATION TABLE
2

### Page 6

@ A340
SERVICE BULLETIN
SUMMARY
DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page :
Printed in FRANCE © AIRBUS, 2005 All rights reserved
MANPOWER
Config. 01
NOTE : Refer to Messier-Dowty Service Bulletin A33/34-32-223 for the man-hours
to do the modification.
ADDITIONAL WORK
MATERIAL INFORMATION
AIRCRAFT DATA
Refer to Messier-Dowty Service Bulletin A33/34-32-223.
APPENDICES
None
TOTAL MANHOURS  22.5
ELAPSED TIME (HOURS)  22.5
TOTAL MANHOURS 1.0
ELAPSED TIME (HOURS) 1.0
3

### Page 7

@ A340
SERVICE BULLETIN
7 DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page : 1 of 15
Printed in FRANCE © AIRBUS, 2005 All rights reserved
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Tel : (33) 5 61 93 33 33
Telex : AIRBU 530526F
Fax : (33) 5 61 93 42 51
ATA SYSTEM : 32
TITLE : LANDING GEAR - NORMAL EXTENSION AND RETRACTION - INTRODUCE A SOLID
PISTON ROD ON THE MLG RETRACTION ACTUATOR
MODIFICATION No. : 52424H15395 54647H15711
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times
remain the property of AIRBUS; no intellectual property right or licence is
granted by AIRBUS in connection with any information contained in it. It is
delivered on the express condition that said document and the information
contained in it shall be treated as confidential, shall not be used for any
purpose other than that for which it is hereby delivered. It shall not be
disclosed in whole or in part to third parties and shall not be duplicated in
any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the
conditions herein), without AIRBUS' prior written consent.
1. PLANNING INFORMATION
A. EFFECTIVITY
(1) Models
340-211 340-212 340-213 340-311 340-312 340-313
(2) Aircraft
(a) Effectivity by MSN
This Service Bulletin is applicable to aircraft MSN:
0002-0009 0011 0013-0016 0018-0029 0031-0035 0038-0041 0043
0044 0046-0049 0051-0053 0056-0058 0061 0063 0074-0076
0078-0081 0084 0085 0088-0091 0093 0094 0097 0101 0103 0104
0114 0115 0117 0123 0125 0126 0128 0129 0131 0133-0137 0139
0141 0142 0145-0147 0149-0152 0154 0156-0161 0163 0164
0166-0170 0173-0176 0178-0180 0182 0185-0187 0190 0192-0194
0196 0197 0199 0201 0202 0204 0207 0208 0210 0212-0218 0220
0221 0225 0227 0228 0233 0235-0237 0239 0242 0243 0245 0246
0252 0257 0260 0263 0264 0268 0270 0273 0274 0278 0280 0282
0292 0297 0302 0304 0307 0310 0318 0319 0321 0325 0327 0329
0331 0332 0335 0347 0352 0354 0355 0359 0363 0367 0373 0374
0377-0379 0381 0385 0387 0390 0395 0399 0402 0406 0411
0413-0415 0424 0429 0430 0433-0435 0438 0442 0446 0447 0450
0459 0467 0470 0474 0483 0528 0538 0541 0544-0546 0554 0556
0559 0561 0562 0582 0585 0590 0598

### Page 8

@ A340
SERVICE BULLETIN
DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page :
Printed in FRANCE © AIRBUS, 2005 All rights reserved
(b) Effectivity by Operator
The Operator/MSN relationship is provided for information only
and is correct at the time of issue in accordance with the
information available to AIRBUS. Any future changes resulting
from transfer of an aircraft from one operator to another will
not be reflected in this list unless the Service Bulletin is
revised for another reason.
OPERATOR MSN
39Z 0151
50Z 0009
ACA 0048 0088 0150 0154 0167 0170 0175 0179 0273 0278
AEA 0031
AFR 0005 0029 0049 0078 0084 0168 0174 0186 0207 0210
0237 0245 0246 0260 0307 0310 0319 0373 0377 0399
AJM 0216 0257
ALK 0032 0033 0034 0367 0374
ARG 0063 0074 0080 0085
AUA 0075 0081 0169 0263
B3R 0046 0204
BWA 0016 0093
CAL 0402 0406 0411 0415 0433 0528 0541
CES 0129 0131 0141 0161 0182
CPA 0123 0126 0128 0136 0137 0142 0147 0157 0160 0208
0218 0220 0227 0228 0381
CRX 0538 0545 0546 0556 0559 0561 0562 0585 0598
CXN 0192 0199 0201 0242 0243 0264
DLH 0020 0024 0027 0028 0035 0047 0051 0052 0053 0056
0135 0158 0213 0233 0252 0274 0297 0304 0321 0325
0327 0335 0347 0352 0354 0355 0379 0390 0434 0447
DRD 0007
ETD 0117
GFA 0039 0040 0097 0103 0133 0212 0215 0282 0554
IBE 0125 0134 0145 0146 0193 0197 0217 0221 0302 0318
0329 0332 0378 0387 0414 0459 0474 0483
KAC 0089 0090 0101 0104
LAN 0359 0363 0429 0442
M3R 0061
MAU 0076 0094 0152 0194 0268
2

### Page 9

@ A340
SERVICE BULLETIN
DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page :
Printed in FRANCE © AIRBUS, 2005 All rights reserved
This modification is applicable by Service Bulletin only.
(c) Effectivity by MSN and Kit/Configuration
The kits and configurations applicable to these MSNs are given
at the end of this list:
0002-0009 0011 0013-0016 0018-0029 0031-0035 0038-0041
0043-0044 0046-0049 0051-0053 0056-0058 0061 0063 0074-0076
0078-0081 0084-0085 0088-0091 0093-0094 0097 0101 0103-0104
0114-0115 0117 0123 0125-0126 0128-0129 0131 0133-0137 0139
0141-0142 0145-0147 0149-0152 0154 0156-0161 0163-0164
0166-0170 0173-0176 0178-0180 0182 0185-0187 0190 0192-0194
0196-0197 0199 0201-0202 0204 0207-0208 0210 0212-0218
0220-0221 0225 0227-0228 0233 0235-0237 0239 0242-0243
0245-0246 0252 0257 0260 0263-0264 0268 0270 0273-0274 0278
0280 0282 0292 0297 0302 0304 0307 0310 0318-0319 0321 0325
0327 0329 0331-0332 0335 0347 0352 0354-0355 0359 0363 0367
0373-0374 0377-0379 0381 0385 0387 0390 0395 0399 0402 0406
0411 0413-0415 0424 0429-0430 0433-0435 0438 0442 0446-0447
0450 0459 0467 0470 0474 0483 0528 0538 0541 0544-0546 0554
0556 0559 0561-0562 0582 0585 0590 0598
MSR 0156 0159 0178
OAL 0235 0239 0280 0292
PAL 0173 0176 0187 0196
QAF 0026
R3L 0004
RJA 0014 0022 0038 0043
SAA 0006 0008 0011 0018 0019 0021 0544 0582 0590
SAS 0413 0424 0430 0435 0450 0467 0470
TAP 0041 0044 0079 0091
THT 0385 0395 0438 0446
THY 0023 0025 0057 0115 0180 0270 0331
UAE 0139 0149 0163 0166 0185 0190 0202 0236
VIR 0002 0003 0013 0015 0058 0114 0164 0214 0225
KIT No. QTY PER A/C CONFIGURATION
01
OPERATOR MSN
3

### Page 10

@ A340
SERVICE BULLETIN
DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page :
Printed in FRANCE © AIRBUS, 2005 All rights reserved
(3) Spares
Actuator-Retraction 114256002-020
Actuator-Retraction 114256002-030
Actuator-Retraction 114256002-040
Actuator-Retraction 114256002-045
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
Fracture of the piston rod for the Main Landing Gear (MLG)
retraction-actuator has occurred on an in-service A330 aircraft,
close to the spherical bearing. Additionally another piston rod has
fractured, due to a longitudinal crack. Both failures are corrosion
related.
The AOT No.A340-32A4211 has been issued to request operators to
carry out an ultrasonic inspection of the piston rod for the MLG
retraction-actuator that have been in service for more than three
years. The AOT is being followed up by the issue of ISB
A340-32-4212 which covers the Messier-Dowty Service Bulletin
A33/34-32-222. Which additionally requests a detailed visual
inspection.
(2) Objective/Action
This Service Bulletin introduces a MLG retraction-actuator which
has a solid piston rod. This new design is only intended for
interim use to alleviate supply demands, it will not be installed
on production aircraft. It is only intended to be installed to
prevent an AOG situation. The solid piston rod is life limited to
MPD Section 9-1. An improved design of hollow piston rod with a
higher standard of corrosion protection will be introduced to
replace the existing design through SB A340-32-4222. This Service
Bulletin is superseded by SB A340-32-4222.
This Service Bulletin is published to advise all operators of A340
aircraft of the issue of Messier-Dowty Service Bulletin
A33/34-32-223.
(3) Advantages
Accomplishment of this Service Bulletin will prevent a possible AOG
situation when a MLG retraction-actuator fails the inspection
requirements of ISB A340-32-4212 and there are no other spare
pre-modification MLG retraction-actuators available.
(4) Operational/Maintenance Consequences
None
4

### Page 11

@ A340
SERVICE BULLETIN
DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page :
Printed in FRANCE © AIRBUS, 2005 All rights reserved
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
(1) Config. 01
(a) Make sure that the aircraft is lifted on jacks (jacking
required for tests).
(b) Make sure that the work areas are safe.
(c) Remove the retraction actuator from the applicable MLG.
(d) Install the retraction actuator with the modified piston rod
to the applicable MLG.
(e) Do the necessary tests.
(f) Lower the aircraft off jacks.
(g) Close up and complete the documentation.
(h) ADDITIONAL WORK :
1 Re-identify the retraction actuator.
E. COMPLIANCE
(1) Classification
Recommended
(2) Accomplishment Timescale
(a) Accomplishment is recommended when a pre-modification MLG
retraction actuator is not available when replacement is necessary
(AOG situation).
(b) ADDITIONAL WORK :
Accomplishment of this Service Bulletin is recommended at the
earliest opportunity where manpower and facilities are available.
F. APPROVAL
Approved under the authority of the EASA Design Organisation Approval
No. EASA.21J.031.
If an aircraft listed in the effectivity has a modification or repair
embodied that is not of AIRBUS origin, and which affects the content of
this Service Bulletin, the operator is responsible for obtaining
approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
5

### Page 12

@ A340
SERVICE BULLETIN
DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page :
Printed in FRANCE © AIRBUS, 2005 All rights reserved
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the
direct labor cost to do the work. These estimates assume that the work
will be done by experienced personnel, and may need to be revised
upwards to suit operator's circumstances. The estimates do not include
the time to prepare, plan or inspect the work. Manufacture and
procurement of parts and tools, drying times for paints, sealants, etc,
and general administration work are also not included.
Config. 01
NOTE : * Refer to Messier-Dowty Service Bulletin A33/34-32-223 for the
man-hours to do the modification.
ADDITIONAL WORK
H. WEIGHT AND BALANCE
Config. 01
A340-200
Manufacturers Empty Weight : +46.0 kg (+101.43 lb)
Effect on Balance : +1656.09 kgm (+11978.51 lb.ft)
A340-300
Manufacturers Empty Weight : +46.0 kg (+101.43 lb)
Effect on Balance : +1754.21 kgm (+12688.20 lb.ft)
Get access 0.50
Remove the Retraction
Actuator
10.0
Modification *
Install the Retraction
Actuator
10.0
Test 1.50
Close up 0.50
TOTAL MANHOURS 22.5
ELAPSED TIME (HOURS) 22.5
Re-identify the retraction
actuator
1.0
TOTAL MANHOURS 1.0
ELAPSED TIME (HOURS) 1.0
6

### Page 13

@ A340
SERVICE BULLETIN
DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page :
Printed in FRANCE © AIRBUS, 2005 All rights reserved
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
K. PUBLICATIONS AFFECTED
L. INTERCHANGEABILITY/MIXABILITY
NOTE (*) Denotes strike 8 on the retraction actuator nameplate.
NOTE (1) Only the mixability configuration(s) and condition(s) stated
in this Service Bulletin are approved.
NOTE : For definitions of interchangeability codes in column INT. refer
to Common Support Data Dictionary (CSDD), chapter 2.
NOTE : All 114256002 actuators up to -045 are subject to this Service
Bulletin and the inspections mandated in CN F2004-086 (B) unless
they have strike 8 cancelled. All 114256003-000 actuators have
strike 8.
Aircraft Maintenance Manual (AMM) : 07-11-00 12-34-24 29-00-00
32-00-00 32-12-00 32-31-46
Electrical Standard Practices Manual
(ESPM)
: 20-55-00
Messier-Dowty Service Bulletin : A33/34-32-223
All Operator Telex (AOT) : A340-32A4211
Inspection Service Bulletin (ISB) : A340-32-4212
Service Bulletin (SB): : A340-32-4222
Messier-Dowty Inspection Service
Bulletin (ISB)
: A33/34-32-222
Illustrated Parts Catalog (IPC) : 32-31-46
DESCRIPTION OLD PART No. NEW PART No. INT MIXABILITY
Actuator-Retr'n,
MLG
114256002-020 114256003-000* 01 See NOTE (1)
Actuator-Retr'n,
MLG
114256002-030 114256003-000* 01 See NOTE (1)
Actuator-Retr'n,
MLG
114256002-040 114256003-000* 01 See NOTE (1)
Actuator-Retr'n,
MLG
114256002-045 114256003-000* 01 See NOTE (1)
7

### Page 14

@ A340
SERVICE BULLETIN
DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page :
Printed in FRANCE © AIRBUS, 2005 All rights reserved
This Page Intentionally Left Blank
8

### Page 15

@ A340
SERVICE BULLETIN
DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page :
Printed in FRANCE © AIRBUS, 2005 All rights reserved
2. MATERIAL INFORMATION
A. MATERIAL — PRICE AND AVAILABILITY
(1) Material
Modification of removed equipment should be negotiated directly
with Messier-Dowty as per instructions given in vendor Service
Bulletin Messier-Dowty A33/34-32-223.
(2) Price and Availability
Refer to the vendor Service Bulletin Messier-Dowty A33/34-32-223
for the equipment modification sales terms.
B. INDUSTRY SUPPORT INFORMATION
Refer to the vendor Service Bulletin Messier-Dowty A33/34-32-223 for the
industry support terms.
C. LIST OF COMPONENTS
None
D. LIST OF MATERIALS — OPERATOR SUPPLIED
(1) Consumable Materials
To accomplish this Service Bulletin it is necessary to use the
consumable materials listed in AMM 32-31-46 Page block 401 and
Messier-Dowty Service Bulletin  A33/34-32-223 .
(2) Components
To accomplish this Service Bulletin it is necessary to use the
parts and expendable materials listed in Messier-Dowty Service
Bulletin  A33/34-32-223 .
E. PARTS TO BE RE—IDENTIFIED BY THE OPERATOR
Refer to the vendor Service Bulletin Messier-Dowty A33/34-32-223.
F. TOOLING — PRICE AND AVAILABILITY
To accomplish this Service Bulletin it is necessary to use the tools and
equipment listed in AMM 32-31-46 Page block 401.
G. SPECIAL TOOLS
None
9

### Page 16

@ A340
SERVICE BULLETIN
DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page :
Printed in FRANCE © AIRBUS, 2005 All rights reserved
This Page Intentionally Left Blank
10

### Page 17

@ A340
SERVICE BULLETIN
DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page :
Printed in FRANCE © AIRBUS, 2005 All rights reserved
3. ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL
WARNING : MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION : ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND
MECHANICALLY SERVICEABLE). WHEN YOU DO MAINTENANCE WORK,
REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC. AS
NECESSARY ON WIRING AND COMPONENTS
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND OTHER
CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION. IF THERE IS
CONTAMINATION, REFER TO ESPM CHAPTER 20-55-00, CLEANING.
(1) Preparation
(a) Make sure that the aircraft is electrically grounded (refer to
AMM 12-34-24 Page block 201).
(b) Make sure that the aircraft is lifted on jacks (Jacking
Required for tests).(Refer to AMM 07-11-00 Page block 201).
(c) Put the safety barriers in position.
(d) On the panel 312VU :
— make sure that the landing gear lever is in the DOWN
position
— make sure there is a warning notice in position to tell
persons not to operate the landing gear.
(e) Make sure that the Green hydraulic system is depressurized
(Refer to AMM 29-00-00 Page block 201).
(f) Do the flight configuration precautions procedure (Refer to
AMM 32-00-00 Page block 201).
(g) Open the applicable MLG door (Refer to AMM 32-12-00 Page block
201).
(h) Put the SAFETY COLLAR-DOOR MLG on the applicable MLG door
actuator (Refer to AMM 32-00-00 Page block 201).
(i) Put the access platforms below the applicable zone :
11

### Page 18

@ A340
SERVICE BULLETIN
DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page :
Printed in FRANCE © AIRBUS, 2005 All rights reserved
— for the LH MLG below zone 731
— for the RH MLG below zone 741.
(j) Get access to the avionics compartment and open, safety and
tag this (these) circuit breaker(s) :
(2) Standard Practices
(a) Refer to Messier-Dowty Service Bulletin A33/34-32-223.
B. MODIFICATION
(1) Config. 01
(a) Remove the applicable MLG retraction-actuator 5222GA or 5223GA
(Refer to AMM 32-31-46 Page block 401).
(b) Do the modification to the MLG retraction-actuator (Refer to
Paragraph 3.F).
(c) Install the modified MLG retraction-actuator (Refer to AMM
32-31-46 Page block 401).
(d) ADDITIONAL WORK
1 Preparation
a Make sure that the aircraft is electrically grounded
(refer to AMM 12-34-24 Page block 201).
b Put the safety barriers in position.
c On the panel 312VU :
— make sure that the landing gear lever is in the DOWN
position
— make sure there is a warning notice in position to
tell persons not to operate the landing gear.
d Put warning notices on the ground hydraulic service
connections to tell persons not to operate the Green
hydraulic system.
e Open the applicable MLG door (Refer to AMM 32-12-00 Page
block 201).
PANEL DESIGNATION FIN LOCATION
721VU HYD PUMP G CTL 9JV U09
722VU LGCIU 2 2GA U38
742VU LGCIU 1 1GA L63
12

### Page 19

@ A340
SERVICE BULLETIN
DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page :
Printed in FRANCE © AIRBUS, 2005 All rights reserved
f Make sure that the safety devices are installed on the
landing gear (Refer to AMM 32-00-00 Page block 201).
g Put the SAFETY COLLAR-DOOR MLG on the applicable MLG
door actuator (Refer to AMM 32-00-00 Page block 201).
h Put the access platforms below the applicable zone :
— for the LH MLG below zone 731
— for the RH MLG below zone 741.
2 MODIFICATION
a Re-identify the MLG retraction actuator. Refer to
Messier-Dowty Service Bulletin No A33/34-32-223
3 CLOSE UP
a Make sure that the work areas are clean and clear of
tools and other items of equipment.
b Remove the SAFETY COLLAR-DOOR MLG from the applicable
MLG door actuator (Refer to AMM 32-00-00 Page block
201).
c Remove the safety devices installed on the landing gear
(Refer to AMM 32-00-00 Page block 201).
d Close the applicable MLG door (Refer to AMM 32-12-00
Page block 201).
e Remove warning notices.
f Remove the safety barriers.
g Move the access platforms clear of the aircraft.
C. TEST
(1) The applicable tests are referred to in the AMM 32-31-46 Page block
401.
D. CLOSE UP
(1) Config. 01
(a) Make sure that the work areas are clean and clear of tools and
other items of equipment.
(b) Lower the aircraft off jacks (Refer to AMM 07-11-00 Page block
201).
(c) Remove the SAFETY COLLAR-DOOR MLG from the applicable MLG door
actuator (Refer to AMM 32-00-00 Page block 201).
13

### Page 20

@ A340
SERVICE BULLETIN
DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page :
Printed in FRANCE © AIRBUS, 2005 All rights reserved
(d) Remove the safety devices installed on the landing gear (Refer
to AMM 32-00-00 Page block 201).
(e) Close the applicable MLG door (Refer to AMM 32-12-00 Page
block 201).
(f) Remove warning notices.
(g) Remove the safety barriers.
(h) Move the access platforms clear of the aircraft.
E. DOCUMENTATION
Write in the applicable aircraft records that you have done all the work
given in the Service Bulletin.
14

### Page 21

@ A340
SERVICE BULLETIN
DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page :
Printed in FRANCE © AIRBUS, 2005 All rights reserved
F. REMOVED COMPONENTS AND SPARES
(1) Components which can be modified on the bench
(a) Refer to Messier Dowty Service Bulletin No A33/34-32-223
(2) Modification
(a) Do the work detailed in Messier Dowty Service Bulletin No
A33/34-32-223
(3) Identification of the modified components
(a) Refer to Messier Dowty Service Bulletin No A33/34-32-223
(4) Documentation
Write in the applicable aircraft records that you have done all the
work given in the Service Bulletin.
15

### Page 22

@ A340
SERVICE BULLETIN
REPORTING SHEET
7 DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page : 1 of 1
Printed in FRANCE © AIRBUS, 2005 All rights reserved
TITLE : LANDING GEAR - NORMAL EXTENSION AND RETRACTION - INTRODUCE A SOLID
PISTON ROD ON THE MLG RETRACTION ACTUATOR
MODIFICATION No. : 52424H15395 54647H15711
Please complete the appropriate item (A or B):
A-S B WILL BE embodied............. YES/NO (if NO please comment)
If YES, aircraft concerned (as per SB effectivity by default) and planned dates
(month/year) of embodiment:..........................
........................................
........................................
B-S B HAS BEEN embodied on aircraft:.....................
........................................
........................................
Operator comments:..............................
.......................................
.......................................
From Airline:.................................
Name/Title:..................................
Signature:.............. Date:.............
If operational documentation is affected (see Paragraph 1.K of this SB): If
information is needed prior to next normal revision or prior to SB embodiment,
please indicate required service:
Either: Modification Operational Impact (MOI), if available. . YES/NO
Or : Intermediate revision. ................ YES/NO
Important Information: This SB will only be incorporated in your maintenance and
operational documentation if this sheet is returned to Airbus and signed by a
duly authorised representative. With the next feasible revision, this will
result in
- updating of maintenance documentation to show pre and post SB data.
- updating of maintenance and operational documentation to show post SB data
after embodiment.
If this SB requires previous or simultaneous accomplishment of other SBs,
Airbus shall automatically include them in the manual revisions. Refer to SIL
00-037 for detailed information.
Please return this completed sheet to:
   AIRBUS
   CUSTOMER SERVICES DIRECTORATE
   1 Rond Point Maurice Bellonte
   31707 BLAGNAC CEDEX FRANCE
   Attn: SDC32 Technical Data and Documentation Services
   FAX: (+33) 5 61 93 28 06
   e-mail: sb.reporting@airbus.com
   or via your Resident Customer Support Office.
   Alternatively, SB lists via letters or fax are also accepted.

### Page 23

@ A340
SERVICE BULLETIN
QUALITY PERCEPTION FORM
7 DATE : May 26/04 SERVICE BULLETIN No. : A340—32—4213
REVISION No. : 01 — Sep 16/05 Page : 1 of 1
Printed in FRANCE © AIRBUS, 2005 All rights reserved
Use this form to tell us what is your perception of the quality of this Service
Bulletin. The reported data that you provide us will be used to analyse areas of
difficulties and to take corrective action to further improve the quality of our
Service Bulletins.
We thank you for the time you have taken in completing this form.
(Please rate on a scale of 1 to 4, with 4 being the highest score)
- Quality rating of this SB 4   3   2   1
- Quality rating of the Accomplishment Instructions 4   3   2   1
- Quality rating of the Illustrations 4   3   2   1
- Is this SB easy to understand ? Y / N
If you have had difficulties in the accomplishment of this SB please quote below
the area(s) and give a short description of the issue.
Planning Material Instructions
X Effectivity X Kit content X Preparation
X Reason X List of Materials X Mod/Inspection
X Manpower Operator Supplied X Test
X References X Re-identification X Close-Up
X Publication X Tooling X Illustrations
Comments :
Operator : Date:
Name/Title :
Please return this form to :
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC
Attn : SEM4  Service Bulletins Management
FAX : (33) 5 61 93 42 51
Or via your Resident Customer Support Office.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
