# Airbus Mandatory Service Bulletin A340-32-4268

Copy: Revision 03 ("SB A340-32-4268 R03"), 24 pages: PDF https://openairdocs.org/files/sha256/03/e8/03e8bce04b26d5a8703ca579db8881c9ae5854a71b8b9a04794883e1ad42d9f9; text https://openairdocs.org/service-documents/airbus/a340-32-4268/file/03e8bce04b26.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2013-0828; AD 2016-18-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Mandatory Service Bulletin)
- Number: A340-32-4268
- Latest revision known: A340-32-4268, Revision 03, dated January 14, 2013 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/a340-32-4268

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2016-18-07](https://openairdocs.org/ad/2016-18-07.md), effective Nov 2, 2016: Revisions 01, 02 and 03
- [AD 2009-15-17](https://openairdocs.org/ad/2009-15-17.md), effective Sep 2, 2009: Revision 01

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/airbus/a340-32-4268/proposed.md).

## Text (24 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2013-0828; AD 2016-18-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 32
TITLE: LANDING GEAR - MAIN GEAR - REPETITIVE INSPECTION OF THE
INTERNAL SURFACE OF THE BOGIE BEAM
MODIFICATION No.: None
This page transmits Revision No.03 of Service Bulletin No.A340-32-4268
ADDITIONAL WORK
**CONF ALL
No additional work is required by this revision for aircraft modified by any previous issue.
REASON
Revision No. 03 issued to correct the effectivity and change the terminology from Repeat to Repetitive
in the SB Title.
CHANGES
The opportunity has been taken to update the effectivity.
FRONT MATTER
LANDING GEAR - MAIN GEAR -
REPETITIVE INSPECTION OF THE
INTERNAL SURFACE OF THE BOGIE
BEAM
SB TITLE UPDATED
 R
SUMMARY
EFFECTIVITY
 OPERATOR LIST UPDATED
 R
PLANNING INFORMATION
EFFECTIVITY
 Note added
 R
Configuration definition
CONF 001
 CONFIGURATION DEFINITION UPDATED
 R
ACCOMPLISHMENT INSTRUCTIONS
Fig. A-UFAAA
Fig. A-UFAAA Sheet 01
 SHEET UPDATED
 R
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
FILLING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete document.
Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
HISTORY OF PREVIOUS REVISIONS
No previous revisions.
Revision No. 01
This revision is issued to remove the compliance time and refer directly to the Airworthiness Directive
(AD). Other technical information has also been updated.
Revision No. 02 issued to change the one time inspection to a repetitive inspection, add flowchart,
accomplishment timescales, inspection cancellation statement added and effectivity updated. The
opportunity has been taken to produce this Service Bulletin in the latest format.
Layout changes due to computerization of this revision are not identified.
NOTE
: This is only applicable for Revision No. 02 and subsequent. If information is required for
Revisions issued previous to this, please check your copies of Revision Transmittal
Sheets or contact AIRBUS.
REVISION SEQUENCE
ORIGINAL: Nov 21/07
REVISION No. : 01 - Oct 30/08
REVISION No. : 02 - Oct 26/12
REVISION No. : 03 - Jan 14/13
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A340
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 32
TITLE: LANDING GEAR - MAIN GEAR - REPETITIVE INSPECTION OF THE
INTERNAL SURFACE OF THE BOGIE BEAM
**CONF ALL
MODIFICATIONS
None
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
An operator of an A330 in-service aircraft reported that the bogie beam on the right hand MLG ruptured
while taxiing during a slow turning manoeuvre.
Investigations have revealed that the rupture was due to compromized paint protection leading to
excessive corrosion on the internal surface of the bogie beam. Further investigations indicate that a
corrosion pit reached a depth sufficient to promote stress corrosion cracking and a subsequent fast
static rupture. No evidence of fatigue was apparent.
Initial inspections of 15 aircraft on the bogie beams belonging to 5 operators have found 8 further bogie
beams with compromized paint surfaces and corrosion in this area. A further 2 bogie beams were
suffering from paint damage. So far no bogie beams have been scrapped but some repairs outside the
published limits have been necessary.
This Service Bulletin is published to advise operat ors of A340 aircraft of the issue of MESSIER DOWTY
Service Bulletin No. A33/34-32-272.
This Service Bulletin details instructions to perform a repeat inspection on the internal surface of the
bogie beam assemblies to ensure that there is no corrosion. The inspection requires the removal of the
bogie beam assembly and a detailed inspection of the internal surfaces using a boroscope.
Accomplishment of this Service Bulletin will give an early detection of corrosion and prevent possible
rupture of the bogie beam due to corrosion.
This inspection requirement is cancelled by the accomplishment of Service Bulletin No. A340-32-4279.
MESSIER-DOWTY Service B ulletin No. A33/34-32-284.
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A340
SERVICE BULLETIN
SUMMARY
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 LROPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 YES
NORMAL JACKING
 YES
NOTE
 (1)
: Service Bulletin must be accomplished.
MATERIAL PRICE INFORMATION
No Material
EFFECTIVITY
This Service Bulletin is applicable to this (these) operator(s) :
47W
 56W
 83V AAW
 ABQ
 AFR AIB
 ALK ARG CAH
 CAL CCA CES
CPA DGA
 DLH FIN GAF GFA HFY IBE IRC
 KAC
 KNE
 LAN M3R
MAU MDG MSR
 NMB
 PAL QAF RJA
 S3R
 SAA SAS SFB
 SLM
 SWR
TAP
 THT THY UAE VCV
 VIR XAX
NOTE
: This inspection is valid for all aircraft pre Modification No. 58896 (Service Bulletin
A340-32-4279) and Pre Modification No. 54500H15561 (Service Bulletin A340-32-4256).
CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU
 None
OEB
 None
AOT
 None
SIL
 None
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 YES
HARD
 NO
SOFT
 NO
OBRM
 NO
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A340
SERVICE BULLETIN
SUMMARY
MANPOWER
Task 324268-832-895-001: INSPEC TION
TOTAL MANHOURS
 24.50
ELAPSED TIME (HOURS)
 12.00
Additional manhours relat ed to Vendor SB; refer to:
Do the inspection on the MLG Bogie Beam Assembly LH
and RH Wings
MESSIER DOWTY Service Bulletin
No. A33/34-32-272
APPENDICES
Appendix. 1 - Inspection Report of Bogie Beam Assembly
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A340
SERVICE BULLETIN
SUMMARY
This Page Intentionally Left Blank
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A340
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 32
TITLE: LANDING GEAR - MAIN GEAR - REPETITIVE INSPECTION OF THE
INTERNAL SURFACE OF THE BOGIE BEAM
MODIFICATION No.: None
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
NOTE
: This inspection is valid for aircraft Pre Modification No. 54500H15561 (Service
Bulletin A340-32-4279) and Pre Modification No. 58896H16335 (Service
Bulletin A340-32-4256).
(1) Models
340-211
 340-212
 340-213
 340-311
 340-312 340-313
(2) Effectivity by MSN
0002-0006
 0009
 0011
 0013-0015
 0018-0029
 0031-0035
 0038
 0041
 0043-0044
0046-0049
 0051-0053
 0056-0058
 0061
 0063
 0074-0076
 0078-0081
 0084-0085
0088-0091
 0093-0094
 0101
 0104
 0114-0115
 0117 0123 0125-0126
 0128-0129 0131
0133-0137
 0139 0141-0142 0145-0147
 0149-0152
 0154 0156-0161
 0163-0164
0166-0170 0173-0176 0178-0180
 0182 0185-0187 0190 0192-0194 0196-0197 0199
0201-0202 0204
 0207-0208 0210 0212-0218 0220-0221 0225 0227-0228 0233
0235-0237 0239 0242-0243 0245-0246 0252 0257 0260 0263-0264 0268 0270
0273-0274 0278 0280 0282 0292 0297 0302 0304 0307 0310 0318-0319 0321 0325
0327 0329 0331-0332 0335 0347 0352 0354-0355 0359 0363 0367 0373-0374
0377-0379 0381 0385 0387 0390 0395 0399 0402 0406 0411 0413-0415 0424
0429-0430 0433-0435 0438 0442 0446-0447 0450 0459 0467 0470 0474 0483 0528
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A340
SERVICE BULLETIN
0538 0541 0544-0546 0554 0556 0559 0561-0562 0582 0585 0590 0598 0643 0646
0651 0668
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
47W
 0009
56W
 0003
 0011
 0013
 0015
 0018
 0019
 0021
83V
 0235 0239 0280 0292
AAW
 0151
ABQ
 0216
 0257
AFR
 0029
 0078
 0084
 0186 0207 0237 0245 0246 0260 0307 0310 0377
0399
AIB
 0332
ALK
 0032
 0033
 0034
 0367 0374 0381
ARG
 0048
 0063
 0074
 0080
 0085
 0093
 0094
 0123 0126 0128 0373
CAH
 0020
 0056
CAL
 0402 0406 0411 0415 0433 0541
CCA
 0192 0199 0201 0242 0243 0264
CES
 0129 0131 0141 0161 0182
CPA
 0136 0137 0142 0147 0157 0160 0208 0218 0220 0227 0228
DGA
 0075
 0081
DLH
 0024
 0027
 0028
 0035
 0052
 0053
 0135 0158 0213 0233 0252 0297
0304 0321 0325 0327 0335 0347 0352 0354 0379 0390 0434 0447
FIN
 0058
 0168 0174
GAF
 0274 0355
GFA
 0212 0215 0282 0554
HFY
 0117 0133
IBE
 0005
 0088
 0125
 0134
 0145
 0146
 0170 0193 0217 0221 0318 0329
0387 0414 0459 0474 0483
IRC
 0002
KAC
 0089
 0090
 0101
 0104
KNE
 0004
LAN
 0167 0359 0363 0429 0442
M3R
 0061
MAU
 0076
 0152 0194 0268
MDG
 0210 0319
MSR
 0156
 0159
 0178
NMB
 0047
 0051
PAL
 0173 0176 0187 0196
QAF
 0026
 0528
RJA
 0014
 0022
 0038
 0043
S3R
 0204
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A340
SERVICE BULLETIN
OPERATOR
 MSN
SAA
 0006
 0197 0378 0544 0582 0590 0643 0646 0651
SAS
 0413 0424 0430 0435 0450 0467 0470
SFB
 0046
SLM
 0049
SWR
 0150 0154 0169 0175 0179 0263 0538 0545 0546 0556 0559 0561
0562 0585 0598
TAP
 0041
 0044
 0079
 0091
THT
 0385 0395 0438 0446 0668
THY
 0023
 0025
 0057
 0115
 0180 0270 0331
UAE
 0139 0149 0163 0166 0185 0190 0202 0236
VCV
 0031
 0302
VIR
 0114
 0164 0214 0225
XAX
 0273 0278
(4) Configuration by MSN
MSN
 CONFIGURATION
0002
 0003
 0004
 0005
 0006
 0009
 0011
 0013
 0014
 0015
 0018
0019
 0020
 0021
 0022
 0023
 0024
 0025
 0026
 0027
 0028
 0029
0031
 0032
 0033
 0034
 0035
 0038
 0041
 0043
 0044
 0046
 0047
0048
 0049
 0051
 0052
 0053
 0056
 0057
 0058
 0061
 0063
 0074
0075
 0076
 0078
 0079
 0080
 0081
 0084
 0085
 0088
 0089
 0090
0091
 0093
 0094
 0101
 0104
 0114
 0115
 0117 0123 0125
 0126
0128 0129 0131 0133
 0134
 0135 0136 0137 0139 0141 0142
0145
 0146
 0147 0149 0150 0151
 0152 0154 0156
 0157 0158
0159
 0160 0161 0163 0164 0166 0167 0168 0169 0170 0173
0174 0175 0176 0178
 0179 0180 0182 0185 0186 0187 0190
0192 0193 0194 0196 0197 0199 0201 0202 0204
 0207 0208
0210 0212 0213 0214 0215 0216 0217 0218 0220 0221 0225
0227 0228 0233 0235 0236 0237 0239 0242 0243 0245 0246
0252 0257 0260 0263 0264 0268 0270 0273 0274 0278 0280
0282 0292 0297 0302 0304 0307 0310 0318 0319 0321 0325
0327 0329 0331 0332 0335 0347 0352 0354 0355 0359 0363
0367 0373 0374 0377 0378 0379 0381 0385 0387 0390 0395
0399 0402 0406 0411 0413 0414 0415 0424 0429 0430 0433
0434 0435 0438 0442 0446 0447 0450 0459 0467 0470 0474
0483 0528 0538 0541 0544 0545 0546 0554 0556 0559 0561
0562 0582 0585 0590 0598 0643 0646 0651 0668
001
(5) Configuration definition
**CONF 001
Config. 001 is valid for all the aircraft given in the effectivity of this Service Bulletin as a
standard configuration.
(6) Material Effectivity
None
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A340
SERVICE BULLETIN
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
An operator of an A330 in-service aircraft reported that the bogie beam on the right hand
MLG ruptured while taxiing during a slow turning manoeuvre.
Investigations have revealed that the rupture was due to compromized paint protection
leading to excessive corrosion on the internal surface of the bogie beam. Further
investigations indicate that a corrosion pit reached a depth sufficient to promote stress
corrosion cracking and a subsequent fast static rupture. No evidence of fatigue was
apparent.
Initial inspections of 15 aircraft on the bogie beams belonging to 5 operators have found
8 further bogie beams with compromized paint surfaces and corrosion in this area. A
further 2 bogie beams were suffering from paint damage. So far no bogie beams have
been scrapped but some repairs outside the published limits have been necessary.
(2) Objective/Action
This Service Bulletin is published to advise operators of A340 aircraft of the issue of
MESSIER DOWTY Service Bulletin No. A33/34-32-272.
This Service Bulletin details instructions to perform a repeat inspection on the internal
surface of the bogie beam assemblies to ensure that there is no corrosion. The
inspection requires the removal of the bogie beam assembly and a detailed inspection of
the internal surfaces using a boroscope.
(3) Advantages
Accomplishment of this Service Bulletin will give an early detection of corrosion and
prevent possible rupture of the bogie beam due to corrosion.
This inspection requirement is cancelled by the accomplishment of Service Bulletin No.
A340-32-4279. MESSIER-DOWTY Serv ice Bulletin No. A33/34-32-284.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
Task 324268-832-895-001: INSPEC TION
(1) Remove the MLG Bogie Beam Assembly from both the LH and RH Wings
(2) Do the inspection on the MLG Bogie Beam Assembly LH and RH Wings
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A340
SERVICE BULLETIN
(3) Install the MLG Bogie Beam Assembly on the LH and RH Wings
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory by the issue of an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA). The AD must
be used as the reference document for the mandated accomplishment timescale.
MLG Bogie Beam Condition
 Inspection Threshold
 Inspection Repeat Interval
MLG bogie beams which have not
embodied AIRBUS modification
54500H15561 in production nor
AIRBUS Service Bulletin No.
A340-32-4256 in service, and which
had accumulated on 03 June 2008
(the effective date of EASA AD
2008-0093) less than or equal to 4.5
years since their first flight on an
aircraft or since their first flight after
their last overhaul, as applicable.
At the first convenient
maintenance opportunity
which occurs after the 4.5
years threshold, but no later
than 6 years since the LH or
RH MLG bogie beam first
flight on an aeroplane or since
first flight after its last
overhaul, as applicable
MLG bogie beams which have not
embodied AIRBUS modification
54500H15561 in production nor
AIRBUS Service Bulletin
A340-32-4256 in service, and which
had accumulated on 03 June 2008
more than 4.5 years since their first
flight on an aeroplane or since their
first flight after their last overhaul, as
applicable.
At the next convenient
maintenance opportunity, or
within 18 months after 04
January 2008 (the effective
date of EASA AD
2007-0314R1), whichever
occurs first and without
exceeding the next bogie
beam overhaul.
No later than 6 years, but no
earlier than 4 years since its
first flight after the MLG bogie
beam overhaul which occurs
after the last inspection
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approv al No. EASA. 21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 5
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A340
SERVICE BULLETIN
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
Task 324268-832-895-001: INSPEC TION
Get Access
 1.00
On Aircraft
Remove the MLG Bogie Beam Assembly from both the
LH and RH Wings
10.00
Install the MLG Bogie Beam Assembly on the LH and
RH Wings
10.00
Tests
 2.50
Close-Up
 1.00
TOTAL MANHOURS
 24.50
ELAPSED TIME (HOURS)
 12.00
Additional manhours relat ed to Vendor SB; refer to:
Do the inspection on the MLG Bogie Beam Assembly
LH and RH Wings
MESSIER DOWTY Service Bulletin
No. A33/34-32-272
H. WEIGHT AND BALANCE
Not Changed
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
Aircraft Maintenance Manual (AMM)
 20-11-11 20-21-12 20-28-00
32-11-14
Elec. Std. Practices Manual (ESPM)
 20-55-00
Vendor Service B ulletin (VSB)
 MESSIER DOWTY Service Bulletin
No. A33/34-32-272
K. PUBLICATION AFFECTED
None
L. INTERCHANGEABILITY/MIXABILITY
Not Applicable
M. SPARES
None
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 6
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A340
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
Inspection and repair of removed equipment should be negotiated directly with
MESSIER DOWTY as per instructions give n in Service Bulletin No. A33/34-32-272.
(2) Price and Availability
No AIRBUS kit will be provided.
Refer to MESSIER DOWTY Service Bulletin N o. A33/34-32-272 for t he equipment sales
terms.
B. INDUSTRY SUPPORT INFORMATION
Refer to MESSIER DOWTY Service Bulletin N o. A33/34-32-272 for t he industry support
terms.
C. LIST OF COMPONENTS
Refer to MESSIER DOWTY Servi ce Bulletin No. A33/34-32-272.
D. LIST OF MATERIALS - OPERATOR SUPPLIED
(1) Consumable Materials
To accomplish this Service Bulletin it will be necessary to use the consumable materials
included in AMM Task 32-11- 14-410-801 and M ESSIER DOWTY Service Bulletin No.
A33/34-32-272.
(2) Components
To accomplish this Service Bulletin it will be necessary to use the expendable parts
included in AMM Task 32-11- 14-410-801 and M ESSIER DOWTY Service Bulletin No.
A33/34-32-272.
(3) Equipment
None
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
F. TOOLING
(1) Tooling - Price and Availability
Refer to MESSIER DOWTY Servi ce Bulletin No. A33/34-32-272.
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 7
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A340
SERVICE BULLETIN
(2) Tools
AMM Task 32-11-14-010-801 and AMM Task 32-11-14-410-801
Refer to MESSIER DOWTY Servi ce Bulletin No. A33/34-32-272.
(3) Special Tools
Refer to MESSIER DOWTY Servi ce Bulletin No. A33/34-32-272.
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 8
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A340
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 324268-832-895-001 - IN SPECTION
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC; AS
NECESSARY ON WIRING AND COMPONENTS
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
Task Associated Data
Zone
731 741
Manpower
TOTAL MANHOURS
 24.50
ELAPSED TIME (HOURS)
 12.00
Additional manhours related to Vendor SB; refer to:
MESSIER DOWTY Service Bulletin No. A33/34-32-272
A. GENERAL
(1) Subtask 324268-910-401-001 - Standard Practices
Manpower Resources
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 20-11-11-911-803
Task 20-21-12-911-801
Task 20-28-00-912-802
(a) Put blanking caps on all the related disconnected electrical-connectors.
(b) Put blanking caps on all the related disconnected hydraulic-connectors.
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 9
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A340
SERVICE BULLETIN
(c) Tightening Torques for Pipe Unions (Refer to AMM Task 20-21-12-911-801).
(d) Electrical Bonding of Components with Conductive Screws and Bolts (Refer to
AMM Task 20-28-00-912-802).
(e) For the removal and installation of wire locking (Refer to AMM Task
20-11-11-911-803).
(2) Subtask 324268-839-401-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
(a) Write in the applicable aircraft records that you have done all the work given in the
Service Bulletin.
B. PREPARATION
(1) Subtask 324268-941-401-001 - Job Set-Up
Work Zones and Access Panels
Zone
 Access/Work location
731
741
Manpower Resources
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 32-11-14-010-801
(a) Do the "Job Set-up" procedures as specified in AMM Task "Removal of the MLG
Bogie Beam Assembly for Access, Complete with Wheels and Brakes" (Refer to
AMM Task 32-11-14-010-801).
C. PROCEDURE
(1) Subtask 324268-020-401-001 - Remove the MLG Bogie Beam Assembly from both
the LH and RH Wings
Work Zones and Access Panels
Zone
 Access/Work location
731
741
Manpower Resources
Manhours
 10.00
Minimum number of person
 2
Subtask elapsed time
 5.00
Skills
 AIRFRAME
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 10
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A340
SERVICE BULLETIN
References
Aircraft Maintenance Manual (AMM)
 Task 32-11-14-010-801
(a) Remove the LH and RH Bogie Beam Assembly for Access, Complete with Wheels
and Brakes (Refer to AMM Task 32-11-14-010-801).
(2) Subtask 324268-832-405-001 - Do the inspection on the MLG Bogie Beam
Assembly LH and RH Wings
Work Zones and Access Panels
Zone
 Access/Work location
731
741
References
Vendor Service B ulletin (VSB)
 MESSIER DOWTY A33/34-32-272
Fig. A-UFAAA
Inspection Flowchart
Sheet 01
NOTE
: The latest revision of MESSIER DOWTY Service Bulletin No.
A33/34-32-272 must be used.
Refer to Fig. A-UFAAA Sheet 01
 .
(a) Do the inspection on the bogie beam assembly LH and RH (Refer to MESSIER
DOWTY Service Bulletin No. A33/34-32-272).
(b) Report all findings, including nil fi ndings, to AIRB US SEEL3 department within 90
days.
Refer to Appendix. 1 - Inspection Report of Bogie Beam Assembly , Inspection
Report.
(3) Subtask 324268-420-401-001 - Install the MLG Bogie Beam Assembly on the LH
and RH Wings
Work Zones and Access Panels
Zone
 Access/Work location
731
741
Manpower Resources
Manhours
 10.00
Minimum number of person
 2
Subtask elapsed time
 5.00
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 32-11-14-410-801
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 11
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A340
SERVICE BULLETIN
(a) Install the LH and RH Bogie Beam assembly After Access, Complete with Wheels
and Brakes (Refer to AMM Task 32-11-14-410-801).
D. TEST
(1) Subtask 324268-700-401-001 - Test
Work Zones and Access Panels
Zone
 Access/Work location
731
741
Manpower Resources
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 32-11-14-410-801
(a) Do the test procedures as specified in AMM Task "Installation of the MLG Bogie
Beam Assembly after Access, Complete with Wheels and Brakes" (Refer to AMM
Task 32-11-14-410-801).
E. CLOSE-UP
(1) Subtask 324268-942-401-001 - Close-Up
Work Zones and Access Panels
Zone
 Access/Work location
731
741
Manpower Resources
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 32-11-14-410-801
(a) Make sure that the work area is clean and clear of tools and other items of
equipment.
(b) Do the "Close up" procedures as specified in AMM Task "Installation of the MLG
Bogie Beam Assembly after Access, Complete with Wheels and Brakes" (Refer to
AMM Task 32-11-14-410-801).
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 12
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A340
SERVICE BULLETIN
**CONF ALL
BEAM INTERNAL SURFACE
PROTECTION INTACT?
IS THE BOGIE
CONFIRM THE EXTENT OF THE
CADMIUM/BASE METAL DAMAGE)
BEFORE NEXT FLIGHT
DAMAGE (LEVEL OF PAINT/
IS THE
REPAIRABLE?
BOGIE BEAM
PROCEED WITH REPAIR
BEFORE NEXT FLIGHT, AND
RECORD THE DAMAGE.
RECORD THE REPAIRS MADE
FINDINGS AND RETURN
INTO SERVICE
RECORD THE NIL
SCRAP THE BOGIE BEAM
RECORD THE FINDINGS.
WITHIN 90 DAYS, INFORM AIRBUS
AND MESSIER−DOWTY LTD. OF 
INSPECTION RESULTS
YES
YES
NO
NO
NO
DO A DETAILED INSPECTION
OR RH BOGIE BEAM INTERNAL
DIAMETER FOR CORROSION OR
IN PARAGRAPH 1E(2) OF THE LH BETWEEN 4 AND 6 YEARS
REPEAT THE INSPECTION
AFTER OVERHAUL,
WITHIN THE TIMESCALE DEFINED
PAINT DAMAGE
YES
QUESTION
ACTION
FINDING
NO FURTHER ACTION
NOTE: THE PURPOSE OF FLOW CHARTS IS TO SUPPLEMENT THE INFORMATION
GIVEN IN THE PROCEDURE AND COMPLIANCE PARAGRAPHS AND NOT TO
SERVE AS THE PRIMARY SOURCE FOR TASKS OR COMPLIANCE TIMES
GIVEN IN THIS SERVICE BULLETIN.
BEEN EMBODIED ON THE
AIRCRAFT OR A33/34−32−284
HAS SB32−4279
BEEN APPLIED ON THE
BOGIE BEAM?
F_SB_324268_7_FAAA_01_04
Figure A-UFAAA - Sheet 01
Inspection Flowchart
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 13
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A340
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 14
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A340
SERVICE BULLETIN
Appendix. 1 - Inspection Report of Bogie Beam Assembly
**CONF ALL
(1) Appendix. 1 - Inspection Report of Bogie Beam Assembly
INSPECTION REPORT OF BOGIE BEAM ASSEMBLY LH WING
SERVICE BULLETIN NO.
A340-32-4268
DATE OF
INSPECTION:
OPERATOR:
AIRCRAFT MSN:
 SERIAL NUMBER
FLIGHT HOURS
 FLIGHT CYCLES
BOGIE BEAM PAINT DAMAGE
FOUND
YES
 NO
OVER WHAT
AREA
LOCATION (AXIALLY AND
CIRCUMFERENTIALLY)
USE THE ILLUSTRATIONS SUPPLIED IN
MESSIER DOWTY SERVICE BULLETIN NO.
A33/34-32-272 TO INDICATE THE AREA AND
THE LOCATION AND RETURN TO AIRBUS
WITH THIS REPORT.
BOGIE BEAM CORROSION
DAMAGE FOUND
YES
 NO
OVER WHAT
AREA
LOCATION (AXIALLY AND
CIRCUMFERENTIALLY)
USE THE ILLUSTRATIONS SUPPLIED IN
MESSIER DOWTY SERVICE BULLETIN NO.
A33/34-32-272 TO INDICATE THE AREA AND
THE LOCATION AND RETURN TO AIRBUS
WITH THIS REPORT.
DEPTH OF THE CORROSION:
SURFACE ONLY, REFER TO
MESSIER DOWTY SERVICE
BULLETIN NO. A33/34-32-272.
WITHIN REPAIRABLE LIMITS, REFER TO MESSIER DOWTY
SERVICE BULLETIN NO. A33/34-32-272.
OUTSIDE THE ABOVE REPAIR LIMITS, CONTACT AIRBUS
CUSTOMER SERVICES FOR FURTHER ADVICE / NTO
APPLICATION.
AREA AND MAXIMUM BLEND NECESSARY TO
CLEAR THE CORROSION
NOTE
: Include photographs of the area before repair and return to AIRBUS. Report all
findings including nil findings to AIRBUS Customer Services.
INSPECTION REPORT OF BOGIE BEAM ASSEMBLY RH WING
SERVICE BULLETIN NO.
A340-32-4268
DATE OF
INSPECTION:
OPERATOR:
AIRCRAFT MSN:
 SERIAL NUMBER
FLIGHT HOURS
 FLIGHT CYCLES
BOGIE BEAM PAINT DAMAGE
FOUND
YES
 NO
OVER WHAT
AREA
LOCATION (AXIALLY AND
CIRCUMFERENTIALLY)
USE THE ILLUSTRATIONS SUPPLIED IN
MESSIER DOWTY SERVICE BULLETIN NO.
A33/34-32-272 TO INDICATE THE AREA AND
THE LOCATION AND RETURN TO AIRBUS
WITH THIS REPORT.
BOGIE BEAM CORROSION
DAMAGE FOUND
YES
 NO
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A340
SERVICE BULLETIN
Appendix. 1 - Inspection Report of Bogie Beam Assembly
OVER WHAT
AREA
LOCATION (AXIALLY AND
CIRCUMFERENTIALLY)
USE THE ILLUSTRATIONS SUPPLIED IN
MESSIER DOWTY SERVICE BULLETIN NO.
A33/34-32-272 TO INDICATE THE AREA AND
THE LOCATION AND RETURN TO AIRBUS
WITH THIS REPORT.
DEPTH OF THE CORROSION:
SURFACE ONLY, REFER TO
MESSIER DOWTY SERVICE
BULLETIN NO. A33/34-32-272.
WITHIN REPAIRABLE LIMITS, REFER TO MESSIER DOWTY
SERVICE BULLETIN NO. A33/34-32-272.
OUTSIDE THE ABOVE REPAIR LIMITS, CONTACT AIRBUS
CUSTOMER SERVICES FOR FURTHER ADVICE / NTO
APPLICATION.
AREA AND MAXIMUM BLEND NECESSARY TO
CLEAR THE CORROSION
NOTE
: Include photographs of the area before repair and return to AIRBUS. Report all
findings including nil findings to AIRBUS Customer Services.
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A340
SERVICE BULLETIN
REPORTING SHEET
TITLE: LANDING GEAR - MAIN GEAR - REPETITIVE INSPECTION OF THE
INTERNAL SURFACE OF THE BOGIE BEAM
MODIFICATION No.: None
Please complete the appropriate item (A or B):
A - SB WILL BE
 embodied YES/NO (if NO please comment)
If YES, aircraft concer ned (as per SB effectivity by default) and planned dates (month/year) of
embodiment:
B - SB HAS BEEN
 embodied on aircraft:
Operator comments:
From Airline:
Name/Title:
Signature: Date:
If operational documentation is affected (see Paragraph 1.K of this SB): If information is needed prior to
next normal revision or prior to SB embodiment, please indicate required service(s):
Either: Modification Operational Impact (MOI), if available YES/NO
Or : Intermediate revision YES/NO
Important Information:
 This SB will only be incorporated in your maintenance and operational
documentation if this sheet is returned to Airbus and signed by a duly authorised representative. With
the next feasible revision, this will result in
- Updating of maintenance documentation to show pre and post SB data.
- Updating of maintenance and operational documentation to show post SB data after embodiment.
If this SB requires previous or simultaneous accomplishment of other SBs, Airbus shall automatically
include them in the manual revisions. Refer to SIL 00-037 for detailed information.
Please return this completed sheet to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn: SDC32 Technical Data and Documentation Services
F A X :( + 3 3 )56 19 32 80 6
e-mail: sb.reporting@airbus.com
or via your Resident Customer Support Office.
Alternatively, SB lists via letters or fax are also accepted.
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A340
SERVICE BULLETIN
QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin. The reported data
that you provide us will be used to analyse areas of difficulties and to take corrective action to further
improve the quality of our Service Bulletins.
We thank you for the time you have taken in completing this form.
(Please rate on a scale of 1 to 4, with 4 being the highest score)
- Quality rating of this SB 4321
- Quality rating of the Accomplishment Instructions 4321
- Quality rating of the Illustrations 4321
- Is this SB easy to understand ? Y/N
If you have had difficulties in the accomplishment of this SB please quote below the area(s) and give a
short description of the issue.
Planning Material Instructions
X Effectivity X Kit content X Preparation
X Reason X List of Materials Operator Supplied X Mod/Inspection
X Manpower X Industry support X Test
X References X Re-identification X Close-Up
X Publication X Tooling X Illustrations
Comments:
Operator: Date:
Name/Title:
Please return this form to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn : SEM4 Service Bulletins Management
F A X:( 3 3 )56 19 34 25 1
Or via your Resident Customer Support Office.
DATE: Nov 21/07 SERVICE BULLETIN No.: A340-32-4268
REVISION No.: 03 - Jan 14/13 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
