# Airbus Service Bulletin A340-32-4275

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 01 ("U.S. DOT/FAA - A340-32-4275 Rev 01"), 27 pages: PDF https://openairdocs.org/files/sha256/d7/cb/d7cb173337405f28b0e00a9b9b3fbefc995be43610aeb2f06482b3d678200368; text https://openairdocs.org/service-documents/airbus/a340-32-4275/file/d7cb17333740.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2014-0425; AD 2014-23-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- U.S. DOT/FAA - Service Bulletin - A340-32-4275 ("U.S. DOT/FAA - Service Bulletin - A340-32-4275"), 20 pages: PDF https://openairdocs.org/files/sha256/35/a7/35a7e3ba8f90caf36c454142ae2537ea0bace4da7d6fdf350b1aeedc207b5429; text https://openairdocs.org/service-documents/airbus/a340-32-4275/file/35a7e3ba8f90.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2012-0296; AD 2012-06-19 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A340-32-4275
- Latest revision known: A340-32-4275, Revision 01, dated July 5, 2013 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/a340-32-4275

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2014-23-08](https://openairdocs.org/ad/2014-23-08.md), effective Dec 31, 2014: Revision 01
- [AD 2012-06-19](https://openairdocs.org/ad/2012-06-19.md), effective Apr 30, 2012: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a340-32-4275/proposed.md).

## Text (27 pages)

Revision 01, the newest copy. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2014-0425; AD 2014-23-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 32
TITLE: LANDING GEAR - NOSE GEAR - INSPECTION OF NOSE LANDING
GEAR MAIN FITTING AND SLIDING TUBE
MODIFICATION No.: None
This page transmits Revision No.01 of Service Bulletin No.A340-32-4275
ADDITIONAL WORK
**CONF ALL
No additional work is required by this revision for aircraft modified by any previous issue.
REASON
Revision 01 issued to:
- include compliance table
- create a table as an appendix for affected part and serial numbers
- add a note in the effectivity that SB is only effective for Part Number (PN) and Serial Number (SN)
listed in Appendix 01
- add MPD reference 323233-01-1
- add AMM task 32-00-00-481-802
- remove part numbers and serial numbers from Subtask 324275-210-401-001 and refer to appendix
01
- change reference to subtask 32-21-00-040-050 to AMM task 32-21-00-040-801
- change reference to subtask 32-21-00-440-050 to AMM task 32-21-00-440-801
- revise flow chart and add note to reference Appendix 01 and contact details.
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
CHANGES
SUMMARY
REASON/DESCRIPTION/OPERATIONAL
CONSEQUENCES
REASON UPDATED
 R
GENERAL EVALUATION
 GENERAL EVALUATION TABLE UPDATED
 R
EFFECTIVITY
 OPERATOR LIST UPDATED
 R
MANPOWER
 MANPOWER UPDATED
 R
APPENDICES
 APPENDICES UPDATED
 R
PLANNING INFORMATION
EFFECTIVITY
 EFFECTIVITY RELATED INFORMATION
UPDATED
R
Configuration definition
CONF 001
 CONFIGURATION DEFINITION UPDATED
 R
REASON
History
 HISTORY UPDATED
 R
Objective/Action
 OBJECTIVE/ACTION UPDATED
 R
Advantages
 ADVANTAGES UPDATED
 R
COMPLIANCE
Classification
 CLASSIFICATION UPDATED
 R
Accomplishment Timescale
 ACCOMPLISHMENT TIMESCALE UPDATED
 R
APPROVAL
 APPROVAL UPDATED
 R
MANPOWER
 MANPOWER UPDATED
 R
PUBLICATION AFFECTED
 PUBLICATIONS AFFECTED ADDED
 N
PUBLICATIONS AFFECTED DELETED FOR
APPLICABLE MSN
D
MATERIAL INFORMATION
MATERIAL - PRICE AND AVAILABILITY
Procurement Addresses
 PROCUREMENT ADDRESSES UPDATED
 R
Price and Availability
 PRICE AND AVAILABILITY UPDATED
 R
ACCOMPLISHMENT INSTRUCTIONS
TASK 324275- 832-895-001-INSPECTION
 TASK SOLUTION UPDATED
NOTE UPDATED
CAUTION UPDATED
R
Task associated data - 001
 ELAPSED TIME UPDATED
 R
Subtask 324275-941-401-001
 SUBTASK SOLUTION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCES UPDATED
R
Subtask 324275-210-401-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 324275-020-401-001
 SUBTASK SOLUTION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCES UPDATED
NOTE UPDATED
R
Subtask 324275-832-401-001
 SUBTASK SOLUTION UPDATED
FIGURE REFERENCE UPDATED
R
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Subtask 324275-420-401-001
 SUBTASK SOLUTION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCES UPDATED
R
Subtask 324275-942-401-001
 SUBTASK SOLUTION UPDATED
REFERENCES UPDATED
REFERENCED DOCUMENTATION UPDATED
R
Fig. A-UAAAA
Fig. A-UAAAA Sheet 01
 SHEET UPDATED
 R
Appendix 01: Applicable NLG Main Fittings and Sliding Tubes PN and SN
APPENDIX CONTENT
 APPENDIX CONTENT ADDED
 N
FILLING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete document.
Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
HISTORY OF PREVIOUS REVISIONS
No previous revision
REVISION SEQUENCE
ORIGINAL: Oct 22/09
REVISION No. : 01 - Jul 05/13
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
This Page Intentionally Left Blank
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A340
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 32
TITLE: LANDING GEAR - NOSE GEAR - INSPECTION OF NOSE LANDING
GEAR MAIN FITTING AND SLIDING TUBE
**CONF ALL
MODIFICATIONS
None
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
In May of 2007 a crack was found on the main fitting of the Reinforced Nose Landing Gear (RNLG) leg
during overhaul on an A340-313 aircraft. Following investigation, it has been concluded that the crack
initiated as a result of residual stress in the part following impact damage. The impact damage was
caused by a towing incident in January of 2001 when the RNLG leg was installed on another A340-313
aircraft. During aircraft pull forward the shear pin on the tow bar sheared and RNLG ran over the tow
bar.
A review of the records of past events revealed that a similar incident had occurred in September of
2004 on an A340-211 aircraft. During overhaul, a crack was found on the NLG sliding tube and this has
been attributed to residual stress following an impact incident.
A review of operator reported incidents has identified some Nose Landing Gear (NLG) Main Fittings and
NLG Sliding Tubes on A330/A340 aircraft that have sustained impact as a result of towing incidents.
This Service Bulletin is published to advise all operators of A340-200/300 aircraft of the issue of
Messier-Dowty Service Bulletin No. D23581-32-061.
This Inspection Service Bulletin (ISB) requires a one time Non-destructive Test (NDT) inspection
(Magnetic Particle Inspection (MPI)) of the affected area(s) on (NLG) Main Fittings and NLG Sliding
Tubes that have sustained impacts as a result of a towing incident to make sure that no cracks are
present; within a grace period of 1,000 Flight Hours (FH) from the issue of Revision No. 01 of this
Service Bulletin unless already performed via the SB revision 00.
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A340
SERVICE BULLETIN
SUMMARY
This initial MPI looks for cracks in the area damaged during the impact, or if the exact location of
damage cannot be confirmed, inspects the front 180˚ of the lower section of the main fitting and/or the
front 120˚ of the lower section of the sliding tube. These are the main areas of the NLG most likely
to be damaged during a towing incident. The inspection will require the removal of paint, surface
protections and labels in the area to be inspected.
If cracks are found the part must be replaced. If no cracks are found the area is to be flap peened to
introduce surface compressive residual stress and corrosion protection, paint protection and labels are
restored. All inspection result (finding of damage including nil findings) must be reported to AIRBUS/M-
D.
Following this initial MPI, repeat detailed inspections of the NLG Main Fittings and NLG Sliding Tubes
are required every 900 FH for damage to the surface protections or corrosion in the affected area(s). If
a visual inspection indicates damage to the paint or sealant around the labels or cadmium or base
metal, then removal of paint, surface protections and labels is required followed by the MPI.
Additionally, if any other area of the NLG that is not covered by this inspection has sustained impact
damage as a result of a towing incident and the part has not been removed from service, operators are
advised to contact Airbus/MBD.
The inspection is normally to be carried out "weight-on-wheels".
NOTE
: It will only be necessary to remove the wheels and towing fitting if the location of impact
damage is unknown or if impact damage is located in the area of the towing fitting.
Accomplishment of this ISB will provide early detection of cracks in the area(s) of the NLG Main Fittings
and NLG Sliding Tubes that have sustained impacts as a result of towing incident and make sure of
continued airworthiness of these NLG Main Fittings and NLG Sliding Tubes.
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 LROPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 YES
NOTE
 (1)
: Service Bulletin must be accomplished.
MATERIAL PRICE INFORMATION
No Material
EFFECTIVITY
This Service Bulletin is applicable to this (these) operator(s) :
15R
 47W
 56W
 58X
 83V
 ABD
 ABQ
 ACA
 AFR
 AIB
 ALK
 ARG
 CAL
CCA
 CPA DGA
 DLH FIN
 GAF
 GFA
 HFY
 I2L
 IBE
 IRC
 IRM
 KAC
LAN
 M3R
 MAU
 MDG
 MSR
 NMB
 PAL
 QAF
 RJA S3R
 SAA
 SAS
 SFB
SLM
 SVW
 SWR
 TAP THT THY
 UAE
 VCV
 VIR
 XAX
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A340
SERVICE BULLETIN
SUMMARY
CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU
 None
OEB
 None
AOT
 None
SIL
 None
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 None
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 YES
HARD
 NO
SOFT
 NO
OBRM
 NO
MANPOWER
Task 324275-832-895-001: INSPECTION
TOTAL MANHOURS
 3.75
ELAPSED TIME (HOURS)
 3.75
Additional manhours relat ed to Vendor SB; refer to:
Inspection
 Messier-Dowty Service Bulletin No.
D23581-32-061
APPENDICES
Appendix 01: Applicable NLG Main Fittings and Sliding Tubes PN and SN
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A340
SERVICE BULLETIN
SUMMARY
This Page Intentionally Left Blank
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A340
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 32
TITLE: LANDING GEAR - NOSE GEAR - INSPECTION OF NOSE LANDING
GEAR MAIN FITTING AND SLIDING TUBE
MODIFICATION No.: None
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
This Inspection Service Bulletin is only applicable to NLG with Main Fitting or Sliding Tube
Part Number (PN) and Serial Number (SN) Listed in Appendix 01.
(1) Models
340-211
 340-212 340-213
 340-311 340-312 340-313
(2) Effectivity by MSN
0002
 0004-0006
 0009
 0011
 0013-0014
 0018-0020
 0022-0029
 0031-0035
 0038
 0041
0043-0044
 0046-0049
 0051-0053
 0056-0058
 0061
 0063
 0074-0076
 0078-0081
0084-0085
 0088-0091
 0093-0094
 0101
 0104
 0114-0115
 0117
 0123
 0125-0126
 0128
0131
 0133-0137
 0139
 0141-0142
 0145-0147
 0149-0152
 0154
 0156-0161
 0163-0164
0166-0170
 0173-0176
 0178-0180
 0182 0185-0187
 0190
 0192-0194
 0196-0197
 0199
0201-0202
 0204
 0207-0208
 0210
 0212-0218
 0220-0221
 0225
 0227-0228
 0233
0236-0237
 0242-0243
 0245-0246
 0252
 0257
 0260
 0263-0264
 0268
 0270
 0273-0274
0278
 0280
 0282
 0292
 0297
 0302
 0304
 0307
 0310
 0318-0319
 0321
 0325
 0327
 0329
0331-0332
 0335
 0347
 0352
 0354-0355
 0359
 0363
 0367
 0373-0374
 0377-0379
 0381
0385 0387
 0390
 0395
 0399
 0402
 0406
 0411
 0413-0415
 0424
 0429-0430
 0433-0435
0438
 0442
 0446-0447
 0450
 0459
 0467
 0470
 0474
 0483
 0528
 0538
 0541
 0544-0546
0554
 0556
 0559
 0561-0562
 0582
 0585
 0590
 0598
 0643
 0646
 0651
 0668
 0793
 0800
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A340
SERVICE BULLETIN
0835
 0844
 0921
 0938
 0955
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
15R
 0151
47W
 0009
56W
 0011
 0013
 0018
 0019
58X
 0004
83V
 0280
 0292
ABD
 0210
ABQ
 0216
 0257
ACA
 0170
AFR
 0029
 0078
 0084
 0186
 0207
 0237
 0245
 0246
 0260
 0307
 0310
 0377
0399
AIB
 0131
 0141
 0161
 0182
 0318
 0332
ALK
 0032
 0033
 0034
 0367
 0374
 0381
ARG
 0048
 0063
 0074
 0080
 0085
 0093
 0094
 0123
 0126
 0128
 0373
CAL
 0402
 0406
 0411
 0415
 0433
 0541
CCA
 0192
 0199
 0201
 0242
 0243
 0264
CPA
 0136 0137
 0142
 0147
 0157
 0160
 0208
 0218
 0220
 0227
 0228
DGA
 0075
 0081
DLH
 0024
 0027
 0028 0035
 0052
 0053
 0135
 0158
 0213
 0233
 0252
 0297
0304
 0321
 0325
 0327
 0335
 0347
 0352
 0354
 0379
 0390
 0434
 0447
FIN
 0058
 0168
 0174
 0835
 0844
 0921
 0938
GAF
 0274
 0355
GFA
 0212
 0215
 0282
 0554
HFY
 0117
 0133
 0190
 0202
I2L
 0005
IBE
 0088
 0125
 0134
 0145
 0146
 0193
 0217
 0221
 0329
 0387
 0414
 0459
0474
 0483
IRC
 0002
IRM
 0020
 0056
KAC
 0089
 0090
 0101
 0104
LAN
 0167
 0359
 0363
 0429
 0442
M3R
 0061
MAU
 0076
 0152
 0194
 0268
 0793
 0800
MDG
 0319
MSR
 0156
 0159
 0178
NMB
 0047
 0051
PAL
 0173
 0176
 0187
 0196
 0302
QAF
 0026
 0528
RJA
 0014
 0022 0038
 0043
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A340
SERVICE BULLETIN
OPERATOR
 MSN
S3R
 0204
SAA
 0006
 0197
 0378
 0544
 0582
 0590
 0643
 0646
 0651
SAS
 0413
 0424
 0430
 0435
 0450
 0467
 0470
SFB
 0046
SLM
 0049
SVW
 0955
SWR
 0150
 0154
 0169
 0175
 0179
 0263
 0538
 0545
 0546
 0556
 0559
 0561
0562
 0585
 0598
TAP
 0041
 0044
 0079 0091
THT
 0385 0395
 0438
 0446
 0668
THY
 0023
 0025
 0057
 0115
 0180
 0270
 0331
UAE
 0139
 0149
 0163
 0166
 0185
 0236
VCV
 0031
VIR
 0114
 0164
 0214
 0225
XAX
 0273
 0278
(4) Configuration by MSN
MSN
 CONFIGURATION
0002
 0004
 0005
 0006
 0009
 0011
 0013
 0014
 0018
 0019
 0020
0022 0023
 0024
 0025
 0026
 0027
 0028 0029
 0031
 0032
 0033
0034
 0035
 0038
 0041
 0043
 0044
 0046
 0047
 0048
 0049
 0051
0052
 0053
 0056
 0057
 0058
 0061
 0063
 0074
 0075
 0076
 0078
0079 0080
 0081
 0084
 0085
 0088
 0089
 0090
 0091
 0093
 0094
0101
 0104
 0114
 0115
 0117
 0123
 0125
 0126
 0128
 0131
 0133
0134
 0135
 0136 0137
 0139
 0141
 0142
 0145
 0146
 0147
 0149
0150
 0151
 0152
 0154
 0156
 0157
 0158
 0159
 0160
 0161
 0163
0164
 0166
 0167
 0168
 0169
 0170
 0173
 0174
 0175
 0176
 0178
0179
 0180
 0182 0185
 0186
 0187
 0190
 0192
 0193
 0194
 0196
0197
 0199
 0201
 0202
 0204
 0207
 0208
 0210
 0212
 0213
 0214
0215
 0216
 0217
 0218
 0220
 0221
 0225
 0227
 0228
 0233
 0236
0237
 0242
 0243
 0245
 0246
 0252
 0257
 0260
 0263
 0264
 0268
0270
 0273
 0274
 0278
 0280
 0282
 0292
 0297
 0302
 0304
 0307
0310
 0318
 0319
 0321
 0325
 0327
 0329
 0331
 0332
 0335
 0347
0352
 0354
 0355
 0359
 0363
 0367
 0373
 0374
 0377
 0378
 0379
0381
 0385 0387
 0390
 0395
 0399
 0402
 0406
 0411
 0413
 0414
0415
 0424
 0429
 0430
 0433
 0434
 0435
 0438
 0442
 0446
 0447
0450
 0459
 0467
 0470
 0474
 0483
 0528
 0538
 0541
 0544
 0545
0546
 0554
 0556
 0559
 0561
 0562
 0582
 0585
 0590
 0598
 0643
0646
 0651
 0668
 0793
 0800
 0835
 0844
 0921
 0938
 0955
001
(5) Configuration definition
**CONF 001
Config. 01 is valid for all the aircraft given in the effectivity of this Service Bulletin as a
standard configuration.
(6) Material Effectivity
No Material Set
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A340
SERVICE BULLETIN
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
In May of 2007 a crack was found on the main fitting of the Reinforced Nose Landing
Gear (RNLG) leg during overhaul on an A340-313 aircraft. Following investigation, it has
been concluded that the crack initiated as a result of residual stress in the part following
impact damage. The impact damage was caused by a towing incident in January of
2001 when the RNLG leg was installed on another A340-313 aircraft. During aircraft pull
forward the shear pin on the tow bar sheared and RNLG ran over the tow bar.
A review of the records of past events revealed that a similar incident had occurred in
September of 2004 on an A340-211 aircraft. During overhaul, a crack was found on the
NLG sliding tube and this has been attributed to residual stress following an impact
incident.
A review of operator reported incidents has identified some Nose Landing Gear (NLG)
Main Fittings and NLG Sliding Tubes on A330/A340 aircraft that have sustained impact
as a result of towing incidents.
(2) Objective/Action
This Service Bulletin is published to advise all operators of A340-200/300 aircraft of the
issue of Messier-Dowty Service Bulletin No. D23581-32-061.
This Inspection Service Bulletin (ISB) requires a one time Non-destructive Test (NDT)
inspection (Magnetic Particle Inspection (MPI)) of the affected area(s) on (NLG) Main
Fittings and NLG Sliding Tubes that have sustained impacts as a result of a towing
incident to make sure that no cracks are present; within a grace period of 1,000 Flight
Hours (FH) from the issue of Revision No. 01 of this Service Bulletin unless already
performed via the SB revision 00.
This initial MPI looks for cracks in the area damaged during the impact, or if the exact
location of damage cannot be confirmed, inspects the front 180˚ of the lower section of
the main fitting and/or the front 120˚ of the lower section of the sliding tube. These are
the main areas of the NLG most likely to be damaged during a towing incident. The
inspection will require the removal of paint, surface protections and labels in the area to
be inspected.
If cracks are found the part must be replaced. If no cracks are found the area is to be
flap peened to introduce surface compressive residual stress and corrosion protection,
paint protection and labels are restored. All inspection result (finding of damage including
nil findings) must be reported to AIRBUS/M-D.
Following this initial MPI, repeat detailed inspections of the NLG Main Fittings and NLG
Sliding Tubes are required every 900 FH for damage to the surface protections or
corrosion in the affected area(s). If a visual inspection indicates damage to the paint or
sealant around the labels or cadmium or base metal, then removal of paint, surface
protections and labels is required followed by the MPI.
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A340
SERVICE BULLETIN
Additionally, if any other area of the NLG that is not covered by this inspection has
sustained impact damage as a result of a towing incident and the part has not been
removed from service, operators are advised to contact Airbus/MBD.
The inspection is normally to be carried out "weight-on-wheels".
NOTE
: It will only be necessary to remove the wheels and towing fitting if the
location of impact damage is unknown or if impact damage is located in
the area of the towing fitting.
(3) Advantages
Accomplishment of this ISB will provide early detection of cracks in the area(s) of the
NLG Main Fittings and NLG Sliding Tubes that have sustained impacts as a result of
towing incident and make sure of continued airworthiness of these NLG Main Fittings
and NLG Sliding Tubes.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
Task 324275-832-895-001: INSPECTION
(1) Check of the NLG Main Fitting and Sliding Tube Serial Number
(2) Remove the NLG Wheels and Towing Fitting (if necessary)
(3) Inspection
(4) Install the NLG Wheels and Towing Fitting (if necessary)
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory by the issue of an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA). The AD must
be used as the reference document for the mandated accomplishment timescale.
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 5
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A340
SERVICE BULLETIN
COMPLIANCE TIME
CONDITION
 ACTION
THRESHOLD
 GRACE PERIOD
REPETITIVE
INTERVAL
All aircraft
 Inspect in accordance
with Subtask
324275-832-401 001
Not Applicable
 1,000 FH From the
issue of Rev 01 of
the Service Bulletin
unless already
performed by Rev
00
900 FH
Crack found
 Clearly mark the
damaged part as
scrap and replace it
by a serviceable one.
Report to AIRBUS
(SEEL3)
Before next flight
 Not Applicable
Repetitive Inspection of Nose Landing Gear Main Fitting and/or Sliding Tube
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organization Approval No. EASA.21J.031
.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
Task 324275-832-895-001: INSPECTION
Get Access
 0.50
On Aircraft
Check of the NLG Main Fitting and Sliding Tube Serial
Number
0.25
Remove the NLG Wheels and Towing Fitting (if
necessary)
1.00
Install the NLG Wheels and Towing Fitting (if
necessary)
1.50
Close-Up
 0.50
TOTAL MANHOURS
 3.75
ELAPSED TIME (HOURS)
 3.75
Additional manhours relat ed to Vendor SB; refer to:
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 6
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A340
SERVICE BULLETIN
Task 324275-832-895-001: INSPECTION
Inspection
 Messier-Dowty Service Bulletin No.
D23581-32-061
H. WEIGHT AND BALANCE
Not Changed
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
Aircraft Maintenance Manual (AMM)
 12-34-24 32-00-00 32-21-00
32-41-12
Elec. Std. Practices Manual (ESPM)
 20-55-00
Vendor Service Bulletin (VSB)
 Messier-Dowty Service Bulletin No.
D23581-32-061
K. PUBLICATION AFFECTED
Maintenance Planning Document (MPD)
 323233-01-1
L. INTERCHANGEABILITY/MIXABILITY
Not Applicable
M. SPARES
None
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 7
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A340
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 8
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A340
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
None
(2) Price and Availability
No AIRBUS kit will be provided.
B. INDUSTRY SUPPORT INFORMATION
AIRBUS will not provide industry support for accomplishment of this Service Bulletin.
C. LIST OF COMPONENTS
No Kit
D. LIST OF MATERIALS - OPERATOR SUPPLIED
None
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
F. TOOLING
(1) Tooling - Price and Availability
None
(2) Tools
None
(3) Special Tools
NOTE
: Refer to Messier-Dowty Service Bulletin No. D23581-32-061.
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 9
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A340
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 10
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A340
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 324275-832-895-001 - IN SPECTION
NOTE
: The purpose of flow charts is to supplement the information given in the Procedure
and Compliance paragraphs and not to serve as the primary source for tasks or
compliance times given in this Service Bulletin.
Task Associated Data
Zone
From 711 to 711
Manpower
TOTAL MANHOURS
 3.75
ELAPSED TIME (HOURS)
 3.75
Additional manhours related to Vendor SB; refer to:
Messier-Dowty Service Bulletin No. D23581-32-061
A. GENERAL
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL
WIRING, COMPONENTS AND THE WORK AREA AS CLEAN AS
POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC.
AS NECESSARY ON WIRING AND COMPONENTS
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF
CONTAMINATION AND DAMAGE TO THE ELECTRICAL WIRING
INSTALLATION.
IN CASE OF CONTAMINATION, REFER TO ESPM 20-55-00.
(1) Subtask 324275-839-401-001 - Administrative
Manpower Resources
Skills
 UTILITY
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 11
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A340
SERVICE BULLETIN
B. PREPARATION
(1) Subtask 324275-941-401-001 - Job Set-up
Work Zones and Access Panels
Zone
 Access/Work location
From
 711
To
 711
Manpower Resources
Skills
 AIRFRAME
ELECTRICAL
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-860-802
Task 32-00-00-481-801
Task 32-00-00-481-802
(a) Make sure that the safety devices are installed on the NLG and the NLG Doors
(Refer to
 AMM Task 32-00-00-481-801 and AMM Task 32-00-00-481-802
 ).
(b) Make sure that the aircraft is electrically grounded for maintenance operations
(Refer to AMM Task 12-34-24-860-802).
C. PROCEDURE
(1) Subtask 324275-210-401- 001 - Check of the NLG Main Fitting and Sliding Tube
Serial Number
Work Zones and Access Panels
Zone
 Access/Work location
From
 711
To
 711
Manpower Resources
Manhours
 0.25
Minimum number of person
 1
Subtask elapsed time
 0.25
Skills
 UTILITY
(a) Find the Identification Plate on the NLG Main Fittings and Sliding Tubes.
(b) Check the Part Number (PN) and Serial Number (SN) of the NLG Main Fittings and
Sliding Tubes, refer to Appendix 01: Applicable NLG Main Fittings and Sliding
Tubes PN and SN
 .
(c) If any other area of the MLG Main Fitting and/or Sliding Tube identified in Appendix
01 that is not covered by this inspection but has sustained impact damage as
a result of a towing incident and the part has not been removed from service,
operators are advised to contact Airbus/MBD.
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 12
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A340
SERVICE BULLETIN
(d) If the SN of the NLG Main Fitting and/or Sliding Tube is included in Appendix 01,
do the worksteps that follow.
(2) Subtask 324275-020-401-001 - Remove the NLG Wheels and Towing Fitting (if
necessary)
Work Zones and Access Panels
Zone
 Access/Work location
From
 711
To
 711
Manpower Resources
Manhours
 1.00
Minimum number of person
 2
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 32-21-00-040-801
Task 32-41-12-000-801
NOTE
: It will only be necessary to remove the wheels and towing fitting if the
location of impact damage is unknown or if impact damage is located in
the area of the towing fitting.
(a) Remove the NLG wheels (Refer to AMM Task 32-41-12-000-801).
(b) Remove the NLG towing fitting (Refer to AMM Task 32-21-00-040-801
 ).
(3) Subtask 324275-832-401-001 - Inspection
Work Zones and Access Panels
Zone
 Access/Work location
From
 711
To
 711
References
Vendor Service Bulletin (VSB)
 Messier-Dowty D23581-32-061
Fig. A-UAAAA
Inspection Flow Chart
Sheet 01
Fig. A-UBAAA
Inspection Areas
Sheet 01
(a) Do the applicable inspection procedures (Refer to
 Fig. A-UAAAA Sheet 01
 , Fig. A-
UBAAA Sheet 01
 and Messier-Dowty Service Bulletin No. D23581-32-061).
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 13
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A340
SERVICE BULLETIN
(4) Subtask 324275-420-401-001 - Install the NLG Wheels and Towing Fitting (if
necessary)
Work Zones and Access Panels
Zone
 Access/Work location
From
 711
To
 711
Manpower Resources
Manhours
 1.50
Minimum number of person
 2
Subtask elapsed time
 1.00
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 32-21-00-440-801
Task 32-41-12-400-801
(a) If necessary, install the NLG towing fitting (Refer to AMM Task 32-21-00-440-801
 ).
(b) If necessary, install the NLG wheels (Refer to AMM Task 32-41-12-400-801).
D. TEST
None
E. CLOSE-UP
(1) Subtask 324275-942-401-001 - Close-up
Work Zones and Access Panels
Zone
 Access/Work location
From
 711
To
 711
Manpower Resources
Skills
 UTILITY
References
Aircraft Maintenance Manual (AMM)
 Task 32-00-00-081-801
Task 32-00-00-081-802
(a) Make sure that the safety devices are removed from the NLG and the NLG Doors
(Refer to AMM Task 32-00-00-081-801 and AMM Task 32-00-00-081-802).
(b) Make sure that the work area is clean and clear of tools and other items of
equipment.
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 14
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A340
SERVICE BULLETIN
**CONF ALL
CLEAN THE AREAS ON THE MAIN FITTING AND/OR SLIDING TUBE
CARRY OUT A DETAILED INSPECTION IN ACCORDANCE WITH
VSB D23581−32−061 FOR ANY DAMAGE TO THE SURFACE PROTECTION.
RECORD THE CONDITION OF THE INSPECTED PARTS
INSPECTION BEEN CARRIED
OUT IN ACCORDANCE
WITH  THIS SB?
YES
DID THE DETAILED
INSPECTION INDICATE DAMAGE
TO THE PAINT, SEALANT AROUND
THE LABELS, CADMIUM
NO
NO
DOES THE MPI
INSPECTION INDICATE A
CRACK?
YES
YES
TO BE INSPECTED
AND/OR BASE METAL?
AREA BEING INSPECTED
BEFORE NEXT FLIGHT:
REMOVE SURFACE PROTECTION
AND LABELS LOCAL TO
WITH VSB D23581−32−061
BEFORE NEXT FLIGHT, FLAP PEEN THE
SURFACE AND RESTORE SURFACE 
PROTECTION IN ACCORDANCE
REPEAT DETAILED
INSPECTION
WITHIN 900 FH
WHICH ARE AT RISK AS SHOWN IN FIGURE A − UBAAA IS REQUIRED.
IF THE AREA OF IMPACT DAMAGE IS KNOWN, ONLY THIS AREA NEEDS TO BE INSPECTED.
IF IMPACT DAMAGE IS SUSPECTED BUT THE EXACT LOCATION IS UNKNOWN,
AN INSPECTION OF THE AREAS OF THE MAIN FITTING AND SLIDING TUBE
QUESTION
ACTION
FINDING
NOTE:
THE PURPOSE OF FLOW CHARTS IS TO SUPPLEMENT THE INFORMATION
GIVEN IN THE PROCEDURE AND COMPLIANCE PARAGRAPHS AND NOT TO
SERVE AS THE PRIMARY SOURCE FOR TASKS OR COMPLIANCE TIMES
GIVEN IN THIS SERVICE BULLETIN.
NO
SPECIAL DETAILED
HAS INITIAL
WITH VSB D23581−32−061. RECORD THE
BEFORE NEXT FLIGHT CARRY OUT
MPI INSPECTION OF THE MAIN FITTING
AND/OR SLIDING TUBE IN ACCORDANCE
CONDITION OF THE INSPECTED PARTS
F_SB_324275_7_AAAA_01_05
BEFORE NEXT FLIGHT,
CLEARLY MARK
THE DAMAGED PART
AS SCRAP AND
REPLACE IT BY A
SERVICEABLE ONE.
REPORT TO AIRBUS (SEEL3)
CHECK THE PN/SN OF THE NLG MAIN FITTING AND SLIDING TUBE, IF THEY ARE NOT IN
THE LIST OF APPLICABILITY GIVEN IN APPENDIX 01, NO FURTHER ACTION IS REQUIRED.
Figure A-UAAAA - Sheet 01
Inspection Flow Chart
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 15
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A340
SERVICE BULLETIN
**CONF ALL
FLANGE TO BE
FRONT 180° OF
MAIN FITTING
BELOW THE LOWER
INSPECTED
TO BE INSPECTED
FRONT 120° OF
THE LOWER END
OF SLIDING TUBE
F_SB_324275_7_BAAA_01_00
Figure A-UBAAA - Sheet 01
Inspection Areas
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 16
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A340
SERVICE BULLETIN
Appendix 01: Applicable NLG Main Fittings and Sliding Tubes PN and SN
**CONF ALL
NLG MAIN FITTING
Part Number
 Serial Number
D63996
 171B
D63996
 145B
D63996
 183B
NLG SLIDING TUBE
Part Number
 Serial Number
D62701
 10EA1
D65046
 7LX1
D65046
 22PX1
D67201
 B161-467
D67201
 B171-471
D67201
 B175-477
D67201
 B179-483
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A340
SERVICE BULLETIN
REPORTING SHEET
TITLE: LANDING GEAR - NOSE GEAR - INSPECTION OF NOSE LANDING
GEAR MAIN FITTING AND SLIDING TUBE
MODIFICATION No.: None
Please complete the appropriate item (A or B):
A - SB WILL BE
 embodied YES/NO (if NO please comment)
If YES, aircraft concer ned (as per SB effectivity by default) and planned dates (month/year) of
embodiment:
B - SB HAS BEEN
 embodied on aircraft:
Operator comments:
From Airline:
Name/Title:
Signature: Date:
If operational documentation is affected (see Paragraph 1.K of this SB): If information is needed prior to
next normal revision or prior to SB embodiment, please indicate required service(s):
Either: Modification Operational Impact (MOI), if available YES/NO
Or : Intermediate revision YES/NO
Important Information:
 This SB will only be incorporated in your maintenance and operational
documentation if this sheet is returned to Airbus and signed by a duly authorised representative. With
the next feasible revision, this will result in
- Updating of maintenance documentation to show pre and post SB data.
- Updating of maintenance and operational documentation to show post SB data after embodiment.
If this SB requires previous or simultaneous accomplishment of other SBs, Airbus shall automatically
include them in the manual revisions. Refer to SIL 00-037 for detailed information.
Please return this completed sheet to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn: SDC32 Technical Data and Documentation Services
F A X :( + 3 3 )56 19 32 80 6
e-mail: sb.reporting@airbus.com
or via your Resident Customer Support Office.
Alternatively, SB lists via letters or fax are also accepted.
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A340
SERVICE BULLETIN
QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin. The reported data
that you provide us will be used to analyse areas of difficulties and to take corrective action to further
improve the quality of our Service Bulletins.
We thank you for the time you have taken in completing this form.
(Please rate on a scale of 1 to 4, with 4 being the highest score)
- Quality rating of this SB 4321
- Quality rating of the Accomplishment Instructions 4321
- Quality rating of the Illustrations 4321
- Is this SB easy to understand ? Y/N
If you have had difficulties in the accomplishment of this SB please quote below the area(s) and give a
short description of the issue.
Planning Material Instructions
X Effectivity X Kit content X Preparation
X Reason X List of Materials Operator Supplied X Mod/Inspection
X Manpower X Industry support X Test
X References X Re-identification X Close-Up
X Publication X Tooling X Illustrations
Comments:
Operator: Date:
Name/Title:
Please return this form to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn : SEM4 Service Bulletins Management
F A X:( 3 3 )56 19 34 25 1
Or via your Resident Customer Support Office.
DATE: Oct 22/09 SERVICE BULLETIN No.: A340-32-4275
REVISION No.: 01 - Jul 05/13 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
