# Airbus Service Bulletin A340-32-4310

Copy: Revision 02 ("A340-32-4310 R02"), 67 pages: PDF https://openairdocs.org/files/sha256/44/7d/447d095beadfac88ae5fbd4be9d6297691ee111a81d665d01138dcd9f70c9d77; text https://openairdocs.org/service-documents/airbus/a340-32-4310/file/447d095beadf.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-0395; AD 2018-19-29 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A340-32-4310
- Latest revision known: A340-32-4310, Revision 02, dated June 16, 2017 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/a340-32-4310

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2018-19-29](https://openairdocs.org/ad/2018-19-29.md), effective Nov 5, 2018: Revision 02

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a340-32-4310/proposed.md).

## Text (67 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-0395; AD 2018-19-29 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 32
TITLE: LANDING GEAR - MAIN GEAR - INSPECTION - PARTS WITH 300M
MATERIAL PROPERTIES OUTSIDE OF SPECIFICATION
REQUIREMENTS
MODIFICATION No.: None
This page transmits Revision No.02 of Service Bulletin No.A340-32-4310
ADDITIONAL WORK
**CONF ALL
No additional work is required by this revision for aircraft inspected by any previous issue.
REASON
Revision No. 02 issued to amend Appendix 04 - Life Limit Sheet 01 by updating the Applicability
A340-2xx column and adding a NOTE for Main Fitting PNs 201488324, 201488335, 201488325 and
201488336.
CHANGES
The main changes of this revision are:
- Update figure A-UAEAA
- Update the Service Bulletin effectivity.
SUMMARY
EFFECTIVITY
 OPERATOR LIST UPDATED
 R
PLANNING INFORMATION
EFFECTIVITY
 EFFECTIVITY RELATED INFORMATION
UPDATED
R
Configuration definition
CONF 001
 CONFIGURATION DEFINITION UPDATED
 R
Appendix 04 - Life Limit
Fig. A-UAEAA
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Fig. A-UAEAA Sheet 01
 SHEET UPDATED
 R
Fig. A-UAEAA Sheet 02
 SHEET UPDATED
 R
Fig. A-UAEAA Sheet 03
 SHEET UPDATED
 R
Fig. A-UAEAA Sheet 04
 SHEET UPDATED
 R
Appendix 05 - Definitions and Formulas
Fig. A-UAHAA
Fig. A-UAHAA Sheet 01
 SHEET UPDATED
 R
FILING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete document.
Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
HISTORY OF PREVIOUS REVISIONS
Revision No. 01 issued to:
Aubert and Duval material source designated S4 to be deleted
Amend Appendix 02 so that PN 201488325 is a RH main fitting and PN 201488335 is a LH main fitting.
REVISION SEQUENCE
ORIGINAL: Aug 08/16
REVISION No. : 01 - Jan 31/17
REVISION No. : 02 - Jun 16/17
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A340
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 32
TITLE: LANDING GEAR - MAIN GEAR - INSPECTION - PARTS WITH 300M
MATERIAL PROPERTIES OUTSIDE OF SPECIFICATION
REQUIREMENTS
**CONF ALL
MODIFICATIONS
None
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
In 2006, Messier-Dowty identified a deficiency in the fatigue performance of 300M high strength steel
used in forgings. The root cause for fatigue deficiency was process issues during the material
preparation.
After thorough investigations, AIRBUS identified that the following material sources were impacted:
- Electralloy (Source 1)
- RSM (Source 2)
- Latrobe (Source 3).
Parts that have been identified as being manufactured from the suspect material properties issue are
Main Fittings, Bogie Beams and Sliding Pistons installed on Main Landing Gear (MLG), Nose Landing
Gear (NLG) and Center Landing Gear (CLG) of A330 and A340 aircraft. If the identified fatigue life
of these suspect components is affected and were exceeded, subsequent failure could lead to a
potentially unsafe condition of the aircraft.
Affected 300M Part Numbers (PNs) from Source 1 thru 3 were previously listed in the ALS Part 1,
however, these PNs will now be managed through dedicated Airworthiness Directive/Service Bulletin in
order to simplify the ALS Part 1.
This Inspection Service Bulletin is issued to:
- list affected part and Serial Numbers (SNs)
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A340
SERVICE BULLETIN
SUMMARY
- specify the reduced lives for the Main Fittings Bogie Beams and Sliding Pistons affected by the
300M material properties quality issue.
Accomplishment of this Inspection Service Bulletin will help in the detection of fatigue life of the Main
Fittings, Bogie Beams and Sliding Pistons affected by the 300M material properties quality.
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 LROPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 NO
NOTE
 (1)
: Service Bulletin must be accomplished.
MATERIAL PRICE INFORMATION
No Material
EFFECTIVITY
This Service Bulletin is applicable to this (these) operator(s) :
01V
 06Y 09M 14S 15R 17M 31V 39N 41N 65W 74W 83V 98W
ABD AFR AIB ALD ARG AXY BOE CAL CPA DGA DLH EDW F2I
FIN GAF HFM HFY IBE IRC IRM KAC KMF
 M3R MAU MDG MRJ
PAL PUE QQE ROI S3R SAA SAS SFB SLM SWR SYR
 TAP THT
THY VCV
CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU
 None
OEB
 None
AOT
 None
SIL
 None
ISI
 None
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 None
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 YES
HARD
 NO
SOFT
 NO
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A340
SERVICE BULLETIN
SUMMARY
OBRM
 NO
MANPOWER
**CONF 001
Task 324310-832-895-001: Inspection
TOTAL MANHOURS
 4.00
ELAPSED TIME (HOURS)
 2.50
**CONF 002
Task 324310-832-895-001: Inspection
TOTAL MANHOURS
 4.00
ELAPSED TIME (HOURS)
 2.50
APPENDICES
**CONF ALL
Appendix 01 - Bogie Beams
Appendix 02 - Main Fittings
Appendix 03 - Sliding Pistons
Appendix 04 - Life Limit
Appendix 05 - Definitions and Formulas
Appendix 06 - Manpower Gantt Chart
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A340
SERVICE BULLETIN
SUMMARY
**CONF ALL
LH SHOWN
RH SIMILAR
Z730 (Z740)
F_SB_324310_7_SAAA_01_00
Figure A-U SAAA - S heet 01
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A340
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 32
TITLE: LANDING GEAR - MAIN GEAR - INSPECTION - PARTS WITH 300M
MATERIAL PROPERTIES OUTSIDE OF SPECIFICATION
REQUIREMENTS
MODIFICATION No.: None
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
(1) Models
340-211 340-212 340-213 340-311 340-312 340-313
(2) Effectivity by MSN
0001-0002 0004 0009 0014 0020 0022-0023 0025-0026 0029 0031 0038 0041
0043-0044 0046-0047 0049 0051 0056-0058 0061 0063 0074-0076 0078-0081 0084
0089-0091 0093-0094 0101 0104 0114-0115 0117 0123 0125-0126 0128 0134-0135
0139 0145-0146
 0149-0152 0154 0156-0160 0163-0164 0166-0170 0174-0175
0178-0180 0185-0186 0190 0192-0194 0197 0199 0201-0202 0204 0207-0208 0210
0212-0215 0217-0218 0221
 0227
 0233 0236-0237 0242-0243 0245-0246 0252 0257
0260 0263-0264 0268 0270 0274 0278 0280 0282 0292 0297 0302 0304 0307 0310
0318-0319 0321 0325 0327 0329 0331-0332 0335 0347 0352 0354-0355 0367
0373-0374 0377-0379 0381 0385 0387 0390 0395 0399 0402 0406 0411 0413 0415
0424 0430 0433-0435 0438 0446-0447 0450 0459 0467 0470 0474 0483 0528 0538
0541 0544-0546 0554 0556 0559 0561-0562 0582 0585 0590 0598 0643 0646 0651
0668 0793 0800 0835 0844 0921 0938 0955
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A340
SERVICE BULLETIN
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
01V
 0146
06Y
 0139 0149
09M
 0483
14S
 0058
15R
 0151
17M
 0955
31V
 0093
39N
 0168 0174
41N
 0009
65W
 0029
74W
 0047 0051
83V
 0280 0292
98W
 0014 0022
ABD
 0210
AFR
 0078 0084 0186 0207 0237 0245 0246 0260 0307 0310 0377
AIB
 0001 0192 0243 0264
ALD
 0156 0159 0178
ARG
 0063 0074 0080 0123 0126 0128 0170 0193 0373
AXY
 0374
BOE
 0554
CAL
 0402 0406 0411 0415 0433 0541
CPA
 0157 0160 0208 0218 0227
DGA
 0075 0081
DLH
 0135 0158 0213 0233 0252 0297 0304 0321 0325 0327 0335 0347
0352 0354 0379 0390 0434 0447
EDW
 0562
F2I
 0038 0043 0094
 0114 0214
FIN
 0835 0844 0921 0938
GAF
 0274 0355
HFM
 0117 0163
 0166
 0185
 0236
 0367
HFY
 0190 0202
IBE
 0125 0134 0145 0217 0221 0329
IRC
 0002
IRM
 0020 0056 0164 0282
KAC
 0089 0090 0101 0104
KMF
 0278
M3R
 0061
MAU
 0076 0152 0194 0268 0793 0800
MDG
 0319
MRJ
 0257
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A340
SERVICE BULLETIN
OPERATOR
 MSN
PAL
 0302 0318 0332 0387 0459 0474
PUE
 0212 0215 0399
QQE
 0026
 0528
ROI
 0199 0201
S3R
 0004 0204
SAA
 0197 0378 0544 0582 0590 0643 0646 0651
SAS
 0167 0413 0424 0430 0435 0450 0467 0470
SFB
 0046
SLM
 0049 0242
SWR
 0150 0154 0169 0175 0179 0263 0538 0545 0546 0556 0559 0561
0585 0598
SYR
 0381
TAP
 0041 0044 0079 0091
THT
 0385 0395 0438 0446 0668
THY
 0023 0025 0057 0115 0180 0270 0331
VCV
 0031
(4) Configuration by MSN
MSN
 CONFIGURATION
0001 0002 0004 0009 0014 0020 0022 0023 0025 0026 0029
0031 0038 0041 0043 0044 0046 0047 0049 0051 0056 0057
0058 0061 0063 0074 0075 0076 0078 0079 0080 0081 0084
0089 0090 0091 0093 0094 0101 0104 0114 0115 0117 0123
0125 0126 0128 0134 0135 0139 0145 0146 0149 0150 0151
0152 0154 0156 0157 0158 0159 0160 0163 0164 0166 0167
0168 0169 0170 0174 0175 0178 0179 0180 0185 0186 0190
0192 0193 0194 0197 0199 0201 0202 0204 0207 0208 0210
0212 0213 0214 0215 0217 0218 0221 0227 0233 0236 0237
0242 0243 0245 0246 0252 0257 0260 0263 0264 0268 0270
0274 0278 0280 0282 0292 0297 0302 0304 0307 0310 0318
0319 0321 0325 0327 0329 0331 0332 0335 0347 0352 0354
0355 0367 0373 0374 0377 0378 0379 0381 0385 0387 0390
0395 0399 0402 0406 0411 0413 0415 0424 0430 0433 0434
0435 0438 0446 0447 0450 0459 0467 0470 0474 0483 0528
0538 0541 0544 0545 0546 0554 0556 0559 0561 0562 0582
0585 0590 0598 0643 0646 0651 0668
001
0793 0800 0835 0844 0921 0938 0955
 002
(5) Configuration definition
**CONF 001
Config. 001 is valid for aircraft with Basic and Growth MLG.
**CONF 002
Config. 002 is valid for aircraft with Enhanced MLG.
(6) Material Effectivity
No Material Set
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A340
SERVICE BULLETIN
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
In 2006, Messier-Dowty identified a deficiency in the fatigue performance of 300M high
strength steel used in forgings. The root cause for fatigue deficiency was process issues
during the material preparation.
After thorough investigations, AIRBUS identified that the following material sources were
impacted:
- Electralloy (Source 1)
- RSM (Source 2)
- Latrobe (Source 3).
Parts that have been identified as being manufactured from the suspect material
properties issue are Main Fittings, Bogie Beams and Sliding Pistons installed on Main
Landing Gear (MLG), Nose Landing Gear (NLG) and Center Landing Gear (CLG) of
A330 and A340 aircraft. If the identified fatigue life of these suspect components is
affected and were exceeded, subsequent failure could lead to a potentially unsafe
condition of the aircraft.
Affected 300M Part Numbers (PNs) from Source 1 thru 3 were previously listed in the
ALS Part 1, however, these PNs will now be managed through dedicated Airworthiness
Directive/Service Bulletin in order to simplify the ALS Part 1.
(2) Objective/Action
This Inspection Service Bulletin is issued to:
- list affected part and Serial Numbers (SNs)
- specify the reduced lives for the Main Fittings Bogie Beams and Sliding Pistons
affected by the 300M material properties quality issue.
(3) Advantages
Accomplishment of this Inspection Service Bulletin will help in the detection of fatigue life
of the Main Fittings, Bogie Beams and Sliding Pistons affected by the 300M material
properties quality.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A340
SERVICE BULLETIN
**CONF 001
Task 324310-832-895-001: Inspection
(1) Identify the PN and SN on the Basic and Growth Left Hand (LH) MLG Common
Standard Bogie Beam
(2) Identify the PN and SN on the Basic and Growth Right Hand (RH) MLG Common
Standard Bogie Beam
(3) Identify the PN and SN on the Basic LH MLG Hybrid Standard and Growth Main
Fitting
(4) Identify the PN and SN on the Basic RH MLG Hybrid Standard and Growth Main
Fitting
(5) Identify the PN and SN on the Growth LH MLG Standard Sliding Pistons
(6) Identify the PN and SN on the Growth RH MLG Standard Sliding Pistons
**CONF 002
Task 324310-832-895-001: Inspection
(1) Identify the PN and SN on the Enhanced LH MLG Bogie Beam
(2) Identify the PNs and SN on the Enhanced RH MLG Bogie Beam
(3) Identify the PN and SN on the Enhanced LH MLG Main Fitting
(4) Identify the PN and SN on the Enhanced RH MLG Main Fitting
(5) Identify the PN and SN on the Enhanced LH MLG Standard Sliding Pistons
(6) Identify the PN and SN on the Enhanced RH MLG Standard Sliding Pistons
**CONF ALL
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA) will be issued
to confirm this classification. The accomplishment timescale, which has not yet been
defined, will be given in the AD.
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 5
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A340
SERVICE BULLETIN
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approv al No. EASA. 21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
**CONF 001
Task 324310-832-895-001: Inspection
Get Access
 0.50
On Aircraft
Identify the PN and SN on the Basic and Growth Left
Hand (LH) MLG Common Standard Bogie Beam
0.50
Identify the PN and SN on the Basic and Growth Right
Hand (RH) MLG Common Standard Bogie Beam
0.50
Identify the PN and SN on the Basic LH MLG Hybrid
Standard and Growth Main Fitting
0.50
Identify the PN and SN on the Basic RH MLG Hybrid
Standard and Growth Main Fitting
0.50
Identify the PN and SN on the Growth LH MLG
Standard Sliding Pistons
0.50
Identify the PN and SN on the Growth RH MLG
Standard Sliding Pistons
0.50
Close-Up
 0.50
TOTAL MANHOURS
 4.00
ELAPSED TIME (HOURS)
 2.50
NOTE
: For an explanation of the manhours and elapsed time, refer to the Gantt
Chart, Fig. A-UAGAA
 given in Appendix 06 - Manpower Gantt Chart .
**CONF 002
Task 324310-832-895-001: Inspection
Get Access
 0.50
On Aircraft
Identify the PN and SN on the Enhanced LH MLG
Bogie Beam
0.50
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 6
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A340
SERVICE BULLETIN
Task 324310-832-895-001: Inspection
Identify the PNs and SN on the Enhanced RH MLG
Bogie Beam
0.50
Identify the PN and SN on the Enhanced LH MLG
Main Fitting
0.50
Identify the PN and SN on the Enhanced RH MLG
Main Fitting
0.50
Identify the PN and SN on the Enhanced LH MLG
Standard Sliding Pistons
0.50
Identify the PN and SN on the Enhanced RH MLG
Standard Sliding Pistons
0.50
Close-Up
 0.50
TOTAL MANHOURS
 4.00
ELAPSED TIME (HOURS)
 2.50
NOTE
: For an explanation of the manhours and elapsed time, refer to the Gantt
Chart, Fig. A-UAGAB
 given in Appendix 06 - Manpower Gantt Chart .
**CONF ALL
H. WEIGHT AND BALANCE
Not Changed
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
**CONF 001
Aircraft Maintenance Manual (AMM)
 06-20-00 12-34-24 32-00-00
Elec. Std. Practices Manual (ESPM)
 20-55-00
**CONF 002
Aircraft Maintenance Manual (AMM)
 06-20-00 12-34-24 32-00-00
Elec. Std. Practices Manual (ESPM)
 20-55-00
**CONF ALL
K. PUBLICATION AFFECTED
None
L. INTERCHANGEABILITY/MIXABILITY
Not Applicable
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 7
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A340
SERVICE BULLETIN
M. SPARES
None
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 8
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A340
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
No Material Set
B. INDUSTRY SUPPORT INFORMATION
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.
For the organisation of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department.
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
France
E-mail: monitored.retrofit@airbus.com
C. LIST OF COMPONENTS
No Kit
D. LIST OF MATERIALS - OPERATOR SUPPLIED
None
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
F. TOOLING
None
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 9
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A340
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 10
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A340
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 324310-832-895-001 - Inspection
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: MAKE SURE THAT THE MAINTENANCE DEVICES OF THE WING TIP BRAKES
ARE IN THE ’O’ (OPERATION) POSITION. THIS PREVENTS THE MOVEMENT
OF THE FLAP/SLAT TRANSMI SSION SYSTEM DURING MAINTENANCE.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND
MECHANICALLY SERVICEABLE).
WHEN YOU DO MAINTENANCE WORK, REPAIRS OR MODIFICATIONS
(MOD), ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND THE
WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC. AS
NECESSARY ON ELECTRICAL WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. Other paragraphs are recommended and may be deviated
from, done as part of other actions or done with accepted methods different from
those given in the Service Bulletin, as long as the RC paragraphs can be done and
the aircraft can be put back into a serviceable condition.
NOTE
: This Service Bulletin contains the instructions for the on-aircraft maintenance
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 11
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A340
SERVICE BULLETIN
necessary to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions contained herein, contact AIRBUS for further
instructions and approval.
NOTE
: The purpose of flowcharts is to supplement the information given in the Procedure
and Compliance paragraphs and not to serve as the primary source for tasks or
compliance times given in this Service Bulletin.
Task Associated Data
**CONF 001
Zone
730 740
Manpower
TOTAL MANHOURS
 4.00
ELAPSED TIME (HOURS)
 2.50
**CONF 002
Zone
730 740
Manpower
TOTAL MANHOURS
 4.00
ELAPSED TIME (HOURS)
 2.50
**CONF ALL
A. GENERAL
**CONF 001
(1) Subtask 324310-910-401-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
(a) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(2) Subtask 324310-839-401-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in the
Service Bulletin.
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 12
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A340
SERVICE BULLETIN
**CONF 002
(1) Subtask 324310-910-401-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
(a) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(2) Subtask 324310-839-401-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in the
Service Bulletin.
**CONF ALL
B. PREPARATION
**CONF 001
(1) Subtask 324310-941-401-001 - Job Set-up
Work Zones and Access Panels
Zone
 Access/Work location
730
740
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-860-802
Task 32-00-00-481-801
Task 32-00-00-481-802
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 13
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A340
SERVICE BULLETIN
- Aircraft electrical network de-energized
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position.
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Put access platforms in position at the MLG.
(c) Make sure that the safety barriers are in position.
(d) Do the installation of the Safety Devices on the Landing Gears, refer to AMM Task
32-00-00-481-801.
(e) Do the installation of the Safety Devices on the Landing Gear Doors, refer to AMM
Task 32-00-00-481-802.
**CONF 002
(1) Subtask 324310-941-401-001 - Job Set-up
Work Zones and Access Panels
Zone
 Access/Work location
730
740
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-860-802
Task 32-00-00-481-801
Task 32-00-00-481-802
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
- Aircraft electrical network de-energized
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 14
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A340
SERVICE BULLETIN
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position.
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Put access platforms in position at the MLG.
(c) Make sure that the safety barriers are in position.
(d) Do the installation of the Safety Devices on the Landing Gears, refer to AMM Task
32-00-00-481-801.
(e) Do the installation of the Safety Devices on the Landing Gear Doors, refer to AMM
Task 32-00-00-481-802.
**CONF ALL
C. PROCEDURE
**CONF 001
(1) Subtask 324310-832-401-001 - Identify the PN and SN on the Basic and Growth
Left Hand (LH) MLG Common Standard Bogie Beam
Work Zones and Access Panels
Zone
 Access/Work location
730
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Fig. A-UAAAA
Basic and Growth MLG Common
Standard Bogie Beams
Sheet 01
Fig. A-UFAAA
Flowchart
Sheet 01
Fig. A-UAEAA
Life Limit
Sheet 01
Sheet 02
Sheet 03
Sheet 04
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 15
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A340
SERVICE BULLETIN
References
Fig. A-UAHAA
Definitions and Formulas
Sheet 01
(a) Do an inspection of the PN and Serial Number SN on the LH MLG Bogie Beam,
refer to Fig. A-UFAAA Sheet 01
 .
1
 Identify PN and SN of the LH MLG Bogie Beam, refer to aircraft records.
2
 Identify aircraft Weight Variant (WV) as per instructions, refer to Fig. A-UAHAA
Sheet 01
 given in Appendix 05 - Definitions and Formulas .
3
 Is the part (PN and SN) identified listed in Fig. A-UAAAA Sheet 01
 given in
Appendix 01 - Bogie Beams .
- If the LH MLG Bogie Beam component is listed in Fig. A-UAAAA Sheet
01
 given in Appendix 01 - Bogie Beams :
. For each part, refer to Fig. A-UAAAA Sheet 01
 given in Appendix 01 -
Bogie Beams , to determine the associated source code.
. For each part, determine the reduced life limitation, refer to Fig. A-
UAEAA S heet 01
 , Fig. A-UAEAA Sheet 02
 , Fig. A-UAEAA Sheet
03
, Fig. A-UAEAA Sheet 04
 and Fig. A-UAHAA Sheet 01
 given in
Appendix 04 - Life Limit and Appendix 05 - Definitions and Formulas .
. Apply the reduced life limitation.
. If a part has been moved between Aircrafts or WV, determine the
remaining life of the part, refer to Fig. A-UAHAA Sheet 01
 given in
Appendix 05 - Definitions and Formulas .
4
 If the LH MLG Bogie Beam components are not listed in Fig. A-UAAAA Sheet
01
 given in Appendix 01 - Bogie Beams , refer to ALS part 1 for life limitation.
NOTE
: If a part has previously been supplied under concession or life
limit recorded in EASA Form 1 or FAA Form 8130-3 and the
PN and SN combination is not listed in Fig. A-UAAAA Sheet
01
 given in Appendix 01 - Bogie Beams of this document, then
refer to the applicable concession documentation to determine
the remaining life of the part.
(2) Subtask 324310-832-402-001 - Identify the PN and SN on the Basic and Growth
Right Hand (RH) MLG Common Standard Bogie Beam
Work Zones and Access Panels
Zone
 Access/Work location
740
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 16
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A340
SERVICE BULLETIN
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Fig. A-UFAAA
Flowchart
Sheet 01
Fig. A-UAAAA
Basic and Growth MLG Common
Standard Bogie Beams
Sheet 01
Fig. A-UAEAA
Life Limit
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-UAHAA
Definitions and Formulas
Sheet 01
(a) Do an inspection of the PN and SN on the RH MLG Bogie Beam, refer to Fig. A-
UFAAA Sheet 01
 .
1
 Identify PN and SN of the RH MLG Bogie Beam, refer to aircraft records.
2
 Identify aircraft WV as per instructions, refer to Fig. A-UAHAA Sheet 01
 given
in Appendix 05 - Definitions and Formulas .
3
 Is the part (PN and SN) identified listed in Fig. A-UAAAA Sheet 01
 given in
Appendix 01 - Bogie Beams .
- If the RH MLG Bogie Beam component is listed in Fig. A-UAAAA Sheet
01
 given in Appendix 01 - Bogie Beams :
. For each part, refer to Fig. A-UAAAA Sheet 01
 given in Appendix 01 -
Bogie Beams to determine the associated source code.
. For each part, determine the reduced life limitation, refer to Fig. A-
UAEAA S heet 01
 , Fig. A-UAEAA Sheet 02
 , Fig. A-UAEAA Sheet
03
, Fig. A-UAEAA Sheet 04
 and Fig. A-UAHAA Sheet 01
 given in
Appendix 04 - Life Limit and Appendix 05 - Definitions and Formulas .
. Apply the reduced life limitation.
. If a part has been moved between Aircrafts or WV, determine the
remaining life of the part, refer to Fig. A-UAHAA Sheet 01
 given in
Appendix 05 - Definitions and Formulas .
4
 If the RH MLG Bogie Beam components are not listed in Fig. A-UAAAA Sheet
01
 given in Appendix 01 - Bogie Beams , refer to ALS part 1 for life limitation.
NOTE
: If a part has previously been supplied under concession or life
limit recorded in EASA Form 1 or FAA Form 8130-3 and the
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 17
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A340
SERVICE BULLETIN
PN and SN combination is not listed in Fig. A-UAAAA Sheet
01
 given in Appendix 01 - Bogie Beams of this document, then
refer to the applicable concession documentation to determine
the remaining life of the part.
(3) Subtask 324310-832-403-001 - Identify the PN and SN on the Basic LH MLG Hybrid
Standard and Growth Main Fitting
Work Zones and Access Panels
Zone
 Access/Work location
730
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Fig. A-UABAA
Basic LH MLG Hybrid Standard and
Growth Main Fitting
Sheet 01
Fig. A-UAEAA
Life Limit
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-UFAAA
Flowchart
Sheet 01
Fig. A-UAHAA
Definitions and Formulas
Sheet 01
(a) Do an inspection of the PN and SN on the LH MLG Main Fitting, refer to Fig. A-
UFAAA Sheet 01
 .
1
 Identify PN and SN of the LH MLG Main Fitting, refer to aircraft records.
2
 Identify aircraft WV as per instructions, refer to Fig. A-UAHAA Sheet 01
 given
in Appendix 05 - Definitions and Formulas .
3
 Is the part (PN and SN) identified listed in Fig. A-UABAA Sheet 01
 given in
Appendix 02 - Main Fittings .
- If the LH MLG Main Fitting component is listed in Fig. A-UABAA Sheet 01
given in Appendix 02 - Main Fittings :
. For each part, refer to Fig. A-UABAA Sheet 01
 given in Appendix 02 -
Main Fittings , to determine the associated source code.
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 18
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A340
SERVICE BULLETIN
. For each part, determine the reduced life limitation, refer to Fig. A-
UAEAA S heet 01
 , Fig. A-UAEAA Sheet 02
 , Fig. A-UAEAA Sheet
03
, Fig. A-UAEAA Sheet 04
 and Fig. A-UAHAA Sheet 01
 given in
Appendix 04 - Life Limit and Appendix 05 - Definitions and Formulas .
. Apply the reduced life limitation.
. If a part has been moved between Aircrafts or WV, determine the
remaining life of the part, refer to Fig. A-UAHAA Sheet 01
 given in
Appendix 05 - Definitions and Formulas .
4
 If the LH MLG Main Fitting components are not listed in Fig. A-UABAA Sheet
01
 given in Appendix 02 - Main Fittings , refer to ALS part 1 for life limitation.
NOTE
: If a part has previously been supplied under concession or life
limit recorded in EASA Form 1 or FAA Form 8130-3 and the
PN and SN combination is not listed in Fig. A-UABAA Sheet
01
 given in Appendix 02 - Main Fittings of this document, then
refer to the applicable concession documentation to determine
the remaining life of the part.
(4) Subtask 324310-832-404-001 - Identify the PN and SN on the Basic RH MLG Hybrid
Standard and Growth Main Fitting
Work Zones and Access Panels
Zone
 Access/Work location
740
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Fig. A-UACAA
Basic RH MLG Hybrid Standard and
Growth Main Fitting
Sheet 01
Fig. A-UFAAA
Flowchart
Sheet 01
Fig. A-UAEAA
Life Limit
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-UAHAA
Definitions and Formulas
Sheet 01
(a) Do an inspection of the PN and SN on the RH MLG Main Fitting, refer to Fig. A-
UFAAA Sheet 01
 .
1
 Identify PN and SN of the RH MLG Main Fitting, refer to aircraft records.
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 19
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A340
SERVICE BULLETIN
2
 Identify aircraft WV as per instructions, refer to Fig. A-UAHAA Sheet 01
 given
in Appendix 05 - Definitions and Formulas .
3
 Is the part (PN and SN) identified listed in Fig. A-UACAA Sheet 01
 given in
Appendix 02 - Main Fittings .
- If the RH MLG Main Fitting component is listed in Fig. A-UACAA Sheet 01
given in Appendix 02 - Main Fittings :
. For each part, refer to Fig. A-UACAA Sheet 01
 given in Appendix 02
- Main Fittings , to determine the associated source code.
. For each part, determine the reduced life limitation, refer to Fig. A-
UAEAA S heet 01
 , Fig. A-UAEAA Sheet 02
 , Fig. A-UAEAA Sheet
03
, Fig. A-UAEAA Sheet 04
 and Fig. A-UAHAA Sheet 01
 given in
Appendix 04 - Life Limit and Appendix 05 - Definitions and Formulas .
. Apply the reduced life limitation.
. If a part has been moved between Aircrafts or WV, determine the
remaining life of the part, refer to Fig. A-UAHAA Sheet 01
 given in
Appendix 05 - Definitions and Formulas .
4
 If the RH MLG Main Fitting components are not listed in Fig. A-UACAA Sheet
01
 given in Appendix 02 - Main Fittings , refer to ALS part 1 for life limitation.
NOTE
: If a part has previously been supplied under concession or life
limit recorded in EASA Form 1 or FAA Form 8130-3 and the
PN and SN combination is not listed in Fig. A-UACAA Sheet
01
 given in Appendix 02 - Main Fittings of this document, then
refer to the applicable concession documentation to determine
the remaining life of the part.
(5) Subtask 324310-832-405-001 - Identify the PN and SN on the Growth LH MLG
Standard Sliding Pistons
Work Zones and Access Panels
Zone
 Access/Work location
730
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Fig. A-UADAA
Standard Sliding Pistons
Sheet 01
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 20
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A340
SERVICE BULLETIN
References
Fig. A-UAEAA
Life Limit
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-UFAAA
Flowchart
Sheet 01
Fig. A-UAHAA
Definitions and Formulas
Sheet 01
(a) Do an inspection of the PN and SN on the LH Sliding Piston, refer to Fig. A-UFAAA
Sheet 01
 .
1
 Identify PN and SN of the LH Sliding Piston, refer to aircraft records.
2
 Identify aircraft WV as per instructions, refer to Fig. A-UAHAA Sheet 01
 given
in Appendix 05 - Definitions and Formulas .
3
 Is the part (PN and SN) identified listed in Fig. A-UADAA Sheet 01
 given in
Appendix 03 - Sliding Pistons .
- If the LH Sliding Piston component is listed in Fig. A-UADAA Sheet 01
given in Appendix 03 - Sliding Pistons :
. For each part, refer to Fig. A-UADAA Sheet 01
 given in Appendix 03
- Sliding Pistons , to determine the associated source code.
. For each part, determine the reduced life limitation, refer to Fig. A-
UAEAA S heet 01
 , Fig. A-UAEAA Sheet 02
 , Fig. A-UAEAA Sheet
03
, Fig. A-UAEAA Sheet 04
 and Fig. A-UAHAA Sheet 01
 given in
Appendix 04 - Life Limit and Appendix 05 - Definitions and Formulas .
. Apply the reduced life limitation.
. If a part has been moved between Aircrafts or WV, determine the
remaining life of the part, refer to given in Appendix 05 - Definitions
and Formulas .
4
 If the LH Sliding Piston components are not listed in Fig. A-UADAA Sheet 01
given in Appendix 03 - Sliding Pistons , refer to ALS part 1 for life limitation.
NOTE
: If a part has previously been supplied under concession or life
limit recorded in EASA Form 1 or FAA Form 8130-3 and the
PN and SN combination is not listed in Fig. A-UADAA Sheet
01
 given in Appendix 03 - Sliding Pistons of this document,
then refer to the applicable concession documentation to
determine the remaining life of the part.
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 21
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A340
SERVICE BULLETIN
(6) Subtask 324310-832-406-001 - Identify the PN and SN on the Growth RH MLG
Standard Sliding Pistons
Work Zones and Access Panels
Zone
 Access/Work location
740
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Fig. A-UADAA
Standard Sliding Pistons
Sheet 01
Fig. A-UAEAA
Life Limit
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-UFAAA
Flowchart
Sheet 01
Fig. A-UAHAA
Definitions and Formulas
Sheet 01
(a) Do an inspection of the PN and SN on the RH MLG Sliding Piston, refer to Fig. A-
UFAAA Sheet 01
 .
1
 Identify PN and SN of the RH MLG Sliding Piston, refer to aircraft records.
2
 Identify aircraft WV as per instructions, refer to Fig. A-UAHAA Sheet 01
 given
in Appendix 05 - Definitions and Formulas .
3
 Is the part (PN and SN) identified listed in Fig. A-UADAA Sheet 01
 given in
Appendix 03 - Sliding Pistons .
- If the RH MLG Sliding Piston component is listed in Fig. A-UADAA Sheet
01
 given in Appendix 03 - Sliding Pistons :
. For each part, refer to Fig. A-UADAA Sheet 01
 given in Appendix 03
- Sliding Pistons , to determine the associated source code.
. For each part, determine the reduced life limitation, refer to Fig. A-
UAEAA S heet 01
 , Fig. A-UAEAA Sheet 02
 , Fig. A-UAEAA Sheet
03
, Fig. A-UAEAA Sheet 04
 and Fig. A-UAHAA Sheet 01
 given in
Appendix 04 - Life Limit and Appendix 05 - Definitions and Formulas .
. Apply the reduced life limitation.
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 22
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29

@A340
SERVICE BULLETIN
. If a part has been moved between Aircrafts or WV, determine the
remaining life of the part, refer to Fig. A-UAHAA Sheet 01
 given in
Appendix 05 - Definitions and Formulas .
4
 If the RH MLG Sliding Piston components are not listed in Fig. A-UADAA
Sheet 01
 given in Appendix 03 - Sliding Pistons , refer to ALS part 1 for life
limitation.
NOTE
: If a part has previously been supplied under concession or life
limit recorded in EASA Form 1 or FAA Form 8130-3 and the
PN and SN combination is not listed in Fig. A-UADAA Sheet
01
 given in Appendix 03 - Sliding Pistons of this document,
then refer to the applicable concession documentation to
determine the remaining life of the part.
**CONF 002
(1) Subtask 324310-832-401-002 - Identify the PN and SN on the Enhanced LH MLG
Bogie Beam
Work Zones and Access Panels
Zone
 Access/Work location
730
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Fig. A-UAAAB
Enhanced MLG Bogie Beams
Sheet 01
Sheet 02
Fig. A-UFAAA
Flowchart
Sheet 01
Fig. A-UAEAA
Life Limit
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-UAHAA
Definitions and Formulas
Sheet 01
(a) Do an inspection of the PN and SN on the LH MLG Bogie Beam, refer to Fig. A-
UFAAA Sheet 01
 .
1
 Identify PN and SN of the LH MLG Bogie Beam, refer to aircraft records.
2
 Identify aircraft WV as per instructions, refer to Fig. A-UAHAA Sheet 01
 given
in Appendix 05 - Definitions and Formulas .
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 23
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 30

@A340
SERVICE BULLETIN
3
 Is the part (PN and SN) identified listed in Fig. A-UAAAB Sheet 01
 and Fig. A-
UAAAB S heet 02
 given in Appendix 01 - Bogie Beams .
- If the LH MLG Bogie Beam component is listed in Fig. A-UAAAB Sheet
01
 and Fig. A-UAAAB Sheet 02
 given in Appendix 01 - Bogie Beams :
. For each part, refer to Fig. A-UAAAB Sheet 01
 and Fig. A-UAAAB
Sheet 02
 given in Appendix 01 - Bogie Beams to determine the
associated source code.
. For each part, determine the reduced life limitation, refer to Fig. A-
UAEAA S heet 01
 , Fig. A-UAEAA Sheet 02
 , Fig. A-UAEAA Sheet
03
, Fig. A-UAEAA Sheet 04
 and Fig. A-UAHAA Sheet 01
 given in
Appendix 04 - Life Limit and Appendix 05 - Definitions and Formulas .
. Apply the reduced life limitation.
. If a part has been moved between Aircrafts or WV, determine the
remaining life of the part, refer to Fig. A-UAHAA Sheet 01
 given in
Appendix 05 - Definitions and Formulas .
4
 If the LH MLG Bogie Beam components are not listed in Fig. A-UAAAB Sheet
01
 and Fig. A-UAAAB Sheet 02
 given in Appendix 01 - Bogie Beams , refer to
ALS part 1 for life limitation.
NOTE
: If a part has previously been supplied under concession or
life limit recorded in EASA Form 1 or FAA Form 8130-3 and
the PN and SN combination is not listed in Fig. A-UAAAB
Sheet 01
 and Fig. A-UAAAB Sheet 02
 given in Appendix 01 -
Bogie Beams of this document, then refer to the applicable
concession documentation to determine the remaining life of
the part.
(2) Subtask 324310-832-402-002 - Identify the PNs and SN on the Enhanced RH MLG
Bogie Beam
Work Zones and Access Panels
Zone
 Access/Work location
740
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Fig. A-UFAAA
Flowchart
Sheet 01
Fig. A-UAAAB
Enhanced MLG Bogie Beams
Sheet 01
Sheet 02
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 24
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 31

@A340
SERVICE BULLETIN
References
Fig. A-UAEAA
Life Limit
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-UAHAA
Definitions and Formulas
Sheet 01
(a) Do an inspection of the PN and SN on the RH MLG Bogie Beam, refer to Fig. A-
UFAAA Sheet 01
 .
1
 Identify PN and SN of the RH MLG Bogie Beam, refer to aircraft records.
2
 Identify aircraft WV as per instructions, refer to Fig. A-UAHAA Sheet 01
 given
in Appendix 05 - Definitions and Formulas .
3
 Is the part (PN and SN) identified listed in Fig. A-UAAAB Sheet 01
 and Fig. A-
UAAAB S heet 02
 given in Appendix 01 - Bogie Beams .
- If the RH MLG Bogie Beam component is listed in Fig. A-UAAAB Sheet
01
 and Fig. A-UAAAB Sheet 02
 given in Appendix 01 - Bogie Beams :
. For each part, refer to Fig. A-UAAAB Sheet 01
 and Fig. A-UAAAB
Sheet 02
 given in Appendix 01 - Bogie Beams to determine the
associated source code.
. For each part, determine the reduced life limitation, refer to Fig. A-
UAEAA S heet 01
 , Fig. A-UAEAA Sheet 02
 , Fig. A-UAEAA Sheet
03
, Fig. A-UAEAA Sheet 04
 and Fig. A-UAHAA Sheet 01
 given in
Appendix 04 - Life Limit and Appendix 05 - Definitions and Formulas .
. Apply the reduced life limitation.
. If a part has been moved between Aircrafts or WV, determine the
remaining life of the part, refer to Fig. A-UAHAA Sheet 01
 given in
Appendix 05 - Definitions and Formulas .
4
 If the RH MLG Bogie Beam components are not listed in Fig. A-UAAAB Sheet
01
 and Fig. A-UAAAB Sheet 02
 given in Appendix 01 - Bogie Beams , refer to
ALS part 1 for life limitation.
NOTE
: If a part has previously been supplied under concession or
life limit recorded in EASA Form 1 or FAA Form 8130-3 and
the PN and SN combination is not listed in Fig. A-UAAAB
Sheet 01
 and Fig. A-UAAAB Sheet 02
 given in Appendix 01 -
Bogie Beams of this document, then refer to the applicable
concession documentation to determine the remaining life of
the part.
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 25
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 32

@A340
SERVICE BULLETIN
(3) Subtask 324310-832-403-002 - Identify the PN and SN on the Enhanced LH MLG
Main Fitting
Work Zones and Access Panels
Zone
 Access/Work location
730
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Fig. A-UABAB
Enhanced LH MLG Main Fitting
Sheet 01
Fig. A-UAEAA
Life Limit
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-UFAAA
Flowchart
Sheet 01
Fig. A-UAHAA
Definitions and Formulas
Sheet 01
(a) Do an inspection of the PN and SN on the LH MLG Main Fitting, refer to Fig. A-
UFAAA Sheet 01
 .
1
 Identify PN and SN of the LH MLG Main Fitting, refer to aircraft records.
2
 Identify aircraft WV as per instructions, refer to Fig. A-UAHAA Sheet 01
 given
in Appendix 05 - Definitions and Formulas .
3
 Is the part (PN and SN) identified listed in Fig. A-UABAB Sheet 01
 given in
Appendix 02 - Main Fittings .
- If the LH MLG Main Fitting component is listed in Fig. A-UABAB Sheet 01
given in Appendix 02 - Main Fittings :
. For each part, refer to Fig. A-UABAB Sheet 01
 given in Appendix 02 -
Main Fittings , to determine the associated source code.
. For each part, determine the reduced life limitation, refer to Fig. A-
UAEAA S heet 01
 , Fig. A-UAEAA Sheet 02
 , Fig. A-UAEAA Sheet
03
, Fig. A-UAEAA Sheet 04
 and Fig. A-UAHAA Sheet 01
 given in
Appendix 04 - Life Limit and Appendix 05 - Definitions and Formulas .
. Apply the reduced life limitation.
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 26
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 33

@A340
SERVICE BULLETIN
. If a part has been moved between Aircrafts or WV, determine the
remaining life of the part, refer to Fig. A-UAHAA Sheet 01
 given in
Appendix 05 - Definitions and Formulas given in Appendix 02 - Main
Fittings .
4
 If the LH MLG Main Fitting components are not listed in Fig. A-UABAB Sheet
01
 given in Appendix 02 - Main Fittings , refer to ALS part 1 for life limitation.
NOTE
: If a part has previously been supplied under concession or life
limit recorded in EASA Form 1 or FAA Form 8130-3 and the
PN and SN combination is not listed in Fig. A-UABAB Sheet
01
 given in Appendix 02 - Main Fittings of this document, then
refer to the applicable concession documentation to determine
the remaining life of the part.
(4) Subtask 324310-832-404-002 - Identify the PN and SN on the Enhanced RH MLG
Main Fitting
Work Zones and Access Panels
Zone
 Access/Work location
740
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Fig. A-UACAB
Enhanced RH MLG Main Fitting
Sheet 01
Fig. A-UFAAA
Flowchart
Sheet 01
Fig. A-UAEAA
Life Limit
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-UAHAA
Definitions and Formulas
Sheet 01
(a) Do an inspection of the PN and SN on the RH MLG Main Fitting, refer to Fig. A-
UFAAA Sheet 01
 .
1
 Identify PN and SN of the RH MLG Main Fitting, refer to aircraft records.
2
 Identify aircraft WV as per instructions, refer to Fig. A-UAHAA Sheet 01
 given
in Appendix 05 - Definitions and Formulas .
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 27
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 34

@A340
SERVICE BULLETIN
3
 Is the part (PN and SN) identified listed in Fig. A-UACAB Sheet 01
 given in
Appendix 02 - Main Fittings .
- If the RH MLG Main Fitting component is listed in Fig. A-UACAB Sheet 01
given in Appendix 02 - Main Fittings :
. For each part, refer to Fig. A-UACAB Sheet 01
 given in Appendix 02
- Main Fittings , to determine the associated source code.
. For each part, determine the reduced life limitation, refer to Fig. A-
UAEAA S heet 01
 , Fig. A-UAEAA Sheet 02
 , Fig. A-UAEAA Sheet
03
, Fig. A-UAEAA Sheet 04
 and Fig. A-UAHAA Sheet 01
 given in
Appendix 04 - Life Limit and Appendix 05 - Definitions and Formulas .
. Apply the reduced life limitation.
. If a part has been moved between Aircrafts or WV, determine the
remaining life of the part, refer to Fig. A-UAHAA Sheet 01
 given in
Appendix 05 - Definitions and Formulas .
4
 If the RH MLG Main Fitting components are not listed in Fig. A-UACAB Sheet
01
 given in Appendix 02 - Main Fittings , refer to ALS part 1 for life limitation.
NOTE
: If a part has previously been supplied under concession or life
limit recorded in EASA Form 1 or FAA Form 8130-3 and the
PN and SN combination is not listed in Fig. A-UACAB Sheet
01
 given in Appendix 02 - Main Fittings of this document, then
refer to the applicable concession documentation to determine
the remaining life of the part.
(5) Subtask 324310-832-405-002 - Identify the PN and SN on the Enhanced LH MLG
Standard Sliding Pistons
Work Zones and Access Panels
Zone
 Access/Work location
730
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Fig. A-UADAB
Enhanced Sliding Pistons
Sheet 01
Fig. A-UAEAA
Life Limit
Sheet 01
Sheet 02
Sheet 03
Sheet 04
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 28
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 35

@A340
SERVICE BULLETIN
References
Fig. A-UFAAA
Flowchart
Sheet 01
Fig. A-UAHAA
Definitions and Formulas
Sheet 01
(a) Do an inspection of the PN and SN on the LH MLG Sliding Piston, refer to Fig. A-
UFAAA Sheet 01
 .
1
 Identify PN and SN of the LH MLG Sliding Piston, refer to aircraft records.
2
 Identify aircraft WV as per instructions, refer to Fig. A-UAHAA Sheet 01
 given
in Appendix 05 - Definitions and Formulas .
3
 Is the part (PN and SN) identified listed in Fig. A-UADAB Sheet 01
 given in
Appendix 03 - Sliding Pistons .
- If the LH MLG Sliding Piston component is listed in Fig. A-UADAB Sheet
01
 given in Appendix 03 - Sliding Pistons :
. For each part, refer to Fig. A-UADAB Sheet 01
 given in Appendix 03
- Sliding Pistons , to determine the associated source code.
. For each part, determine the reduced life limitation, refer to Fig. A-
UAEAA S heet 01
 , Fig. A-UAEAA Sheet 02
 , Fig. A-UAEAA Sheet
03
, Fig. A-UAEAA Sheet 04
 and Fig. A-UAHAA Sheet 01
 given in
Appendix 04 - Life Limit and Appendix 05 - Definitions and Formulas .
. Apply the reduced life limitation.
. If a part has been moved between Aircrafts or WV, determine the
remaining life of the part, refer to Fig. A-UAHAA Sheet 01
 given in
Appendix 05 - Definitions and Formulas .
4
 If the LH MLG Sliding Piston components are not listed in Fig. A-UADAB
Sheet 01
 given in Appendix 03 - Sliding Pistons , refer to ALS part 1 for life
limitation.
NOTE
: If a part has previously been supplied under concession or life
limit recorded in EASA Form 1 or FAA Form 8130-3 and the
PN and SN combination is not listed in Fig. A-UADAB Sheet
01
 of this document, then refer to the applicable concession
documentation to determine the remaining life of the part.
(6) Subtask 324310-832-406-002 - Identify the PN and SN on the Enhanced RH MLG
Standard Sliding Pistons
Work Zones and Access Panels
Zone
 Access/Work location
740
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 29
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 36

@A340
SERVICE BULLETIN
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Fig. A-UADAB
Enhanced Sliding Pistons
Sheet 01
Fig. A-UAEAA
Life Limit
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-UFAAA
Flowchart
Sheet 01
Fig. A-UAHAA
Definitions and Formulas
Sheet 01
(a) Do an inspection of the PN and SN on the RH MLG Sliding Piston, refer to Fig. A-
UFAAA Sheet 01
 .
1
 Identify PN and SN of the RH MLG Sliding Piston, refer to aircraft records.
2
 Identify aircraft WV as per instructions, refer to Fig. A-UAHAA Sheet 01
 given
in Appendix 05 - Definitions and Formulas .
3
 Is the part (PN and SN) identified listed in Fig. A-UADAB Sheet 01
 given in
Appendix 03 - Sliding Pistons .
- If the RH MLG Sliding Piston component is listed in Fig. A-UADAB Sheet
01
 given in Appendix 03 - Sliding Pistons :
. For each part, refer to Fig. A-UADAB Sheet 01
 given in Appendix 03
- Sliding Pistons , to determine the associated source code.
. For each part, determine the reduced life limitation, refer to Fig. A-
UAEAA S heet 01
 , Fig. A-UAEAA Sheet 02
 , Fig. A-UAEAA Sheet
03
, Fig. A-UAEAA Sheet 04
 and Fig. A-UAHAA Sheet 01
 given in
Appendix 04 - Life Limit and Appendix 05 - Definitions and Formulas .
. Apply the reduced life limitation.
. If a part has been moved between Aircrafts or WV, determine the
remaining life of the part, refer to Fig. A-UAHAA Sheet 01
 given in
Appendix 05 - Definitions and Formulas .
4
 If the RH MLG Sliding Piston components are not listed in Fig. A-UADAB
Sheet 01
 given in Appendix 03 - Sliding Pistons , refer to ALS part 1 for life
limitation.
NOTE
: If a part has previously been supplied under concession or life
limit recorded in EASA Form 1 or FAA Form 8130-3 and the
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 30
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 37

@A340
SERVICE BULLETIN
PN and SN combination is not listed in Fig. A-UADAB Sheet
01
 given in Appendix 03 - Sliding Pistons of this document,
then refer to the applicable concession documentation to
determine the remaining life of the part.
**CONF ALL
D. TEST
**CONF 001
None
**CONF 002
None
**CONF ALL
E. CLOSE-UP
**CONF 001
(1) Subtask 324310-942-401-001 - Close-up
Work Zones and Access Panels
Zone
 Access/Work location
730
740
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 32-00-00-081-801
Task 32-00-00-081-802
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Remove the safety devices from the Landing Gear Doors, refer to AMM Task
32-00-00-081-802.
(c) Remove the safety devices from the Landing Gears, refer to AMM Task
32-00-00-081-801.
(d) Remove the access platform(s).
(e) Put the aircraft back to its initial configuration.
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 31
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 38

@A340
SERVICE BULLETIN
**CONF 002
(1) Subtask 324310-942-401-001 - Close-up
Work Zones and Access Panels
Zone
 Access/Work location
730
740
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 32-00-00-081-801
Task 32-00-00-081-802
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Remove the safety devices from the Landing Gear Doors, refer to AMM Task
32-00-00-081-802.
(c) Remove the safety devices from the Landing Gears, refer to AMM Task
32-00-00-081-801.
(d) Remove the access platform(s).
(e) Put the aircraft back to its initial configuration.
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 32
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 39

@A340
SERVICE BULLETIN
**CONF ALL
YES NO
IDENTIFY PN AND SN OF THE MLG MAIN
FITTINGS, BOGIE BEAMS AND SLIDING PISTONS
IDENTIFY AIRCRAFT WEIGHT VARIANT AS PER
INSTRUCTIONS GIVEN IN APPENDIX 04
ARE THE PARTS
(PN+SN) IDENTIFIED
HERE ABOVE LISTED IN
APPENDIX 01, 02
REFER TO ALS PART 1
FOR LIFE LIMITATION
APPLY THE REDUCED
LIFE LIMITATION
END
NOTE: THE PURPOSE OF FLOWCHARTS IS TO SUPPLEMENT THE INFORMATION
GIVEN IN THE PROCEDURE AND COMPLIANCE PARAGRAPHS AND NOT TO
SERVE AS THE PRIMARY SOURCE FOR TASKS OR COMPLIANCE TIMES
GIVEN IN THIS SERVICE BULLETIN.
OR 03?
FOR EACH PART, REFER TO
APPENDIX 01, 02 AND 03
TO DETERMINE THE
ASSOCIATED SOURCE CODE
FOR EACH PART, DETERMINE THE
REDUCED LIFE LIMITATION IN
ACCORDANCE WITH THE INSTRUCTIONS
GIVEN IN APPENDIX 04 AND 05
F_SB_324310_7_FAAA_01_02
Figure A-UFAAA - Sheet 01
Flowchart
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 33
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 40

@A340
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 34
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 41

@A340
SERVICE BULLETIN
Appendix 01 - Bogie Beams
**CONF ALL
For the PN/SN of the affected Bogie Beams, refer to
**CONF 001 Fig. A-UAAAA
**CONF 002 Fig. A-UAAAB
 .
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 42

@A340
SERVICE BULLETIN
Appendix 01 - Bogie Beams
**CONF 001
IF A PN AND SN COMBINATION IS NOT LISTED, REFER TO A340 ALS PART 1 AS APPLICABLE.01
02
NOTE:
IF A PART HAS PREVIOUSLY BEEN SUPPLIED UNDER CONCESSION ON LIFE LIMIT RECORDED IN EASA FORM 1 OR FAA FORM 8130−3 (WHICH WAS
ASSOCIATED TO THE 300M MATERIAL QUALITY ISSUE) AND THE PN AND SN COMBINATION IS NOT IN THIS SB, THE PART HAS BEEN SUBSEQUENTLY
DEEMED TO BE NOT AFFECTED AND THE LIFE LIMITS FOR THESE PARTS SHALL BE FOUND IN A340 ALS PART 1 AS APPLICABLE.
03 IF A PART HAS PREVIOUSLY BEEN SUPPLIED UNDER CONCESSION ON LIFE LIMIT RECORDED IN EASA FORM 1 OR FAA FORM 8130−3 (WHICH WAS NOT
ASSOCIATED TO THE 300M MATERIAL QUALITY ISSUE) AND THE PN AND SN COMBINATION IS NOT IN THIS SB, THEN REFER TO THE APPLICABLE  
CONCESSION DOCUMENTATION TO DETERMINE THE REMAINING LIFE OF THE PART.
Notes
01
02
03
SerialNumber Source Part Number SerialNumber SourcePart Number
201272304, 201272307
201272304, 201272307
201272304, 201272307
201272304, 201272307
201272304, 201272307
201272304, 201272307
201272304, 201272307
201272304, 201272307
201272304, 201272307
201272304, 201272307
201272304, 201272307
201272304, 201272307
201272304, 201272307
201272304, 201272307
201272304, 201272307
201272304, 201272307
201272304, 201272307
201272304, 201272307
201272304, 201272307
201272304, 201272307
S2B8209/05
S2A9877/05201272304, 201272307S2A8100/05
S2A9876/05201272304, 201272307S2A8099/05
S2A9875/05201272304, 201272307S2A8098/05
S2A9874/05201272304, 201272307S2A8097/05
S2A9873/05201272304, 201272307S2A8096/05
S2A8295/05201272304, 201272307S2A8095/05
S2A8294/05201272304, 201272307S2A8094/05
S2A8293/05201272304, 201272307S2B3900/05
S2A8292/05201272304, 201272307S2B3899/05
S2A8291/05201272304, 201272307S2B07MDG3667
S2A8290/05201272304, 201272307S2B07MDG3666
S2A8289/05201272304, 201272307S2B07MDG3665
S2A8288/05201272304, 201272307S2B07MDG3664
S2A8287/05201272304, 201272307S2B07MDG3663
S2B8286/05201272304, 201272307S2A07MDG3662
S2A8214/05201272307201272304,S2A06MDG4770
S2A8213/05201272304, 201272307S2A06MDG4769
S2A8212/05201272304, 201272307S2A06MDG2908
S2A8211/05201272304, 201272307S2B06MDG2907
S2B058210/201272304, 201272307S2B06MDG2906
201272304, 201272307
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
, 201272308
F_SB_324310_7_AAAA_01_01
Figure A-U AAAA - S heet 01
Basic and Growth MLG Common Standard Bogie Beams
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 43

@A340
SERVICE BULLETIN
Appendix 01 - Bogie Beams
**CONF 002
IF A PN AND SN COMBINATION IS NOT LISTED, REFER TO A340 ALS PART 1 AS APPLICABLE.01
02
NOTE:
IF A PART HAS PREVIOUSLY BEEN SUPPLIED UNDER CONCESSION ON LIFE LIMIT RECORDED IN EASA FORM 1 OR FAA FORM 8130−3 (WHICH WAS
ASSOCIATED TO THE 300M MATERIAL QUALITY ISSUE) AND THE PN AND SN COMBINATION IS NOT IN THIS SB, THE PART HAS BEEN SUBSEQUENTLY
DEEMED TO BE NOT AFFECTED AND THE LIFE LIMITS FOR THESE PARTS SHALL BE FOUND IN A340 ALS PART 1 AS APPLICABLE.
03 IF A PART HAS PREVIOUSLY BEEN SUPPLIED UNDER CONCESSION ON LIFE LIMIT RECORDED IN EASA FORM 1 OR FAA FORM 8130−3 (WHICH WAS NOT
ASSOCIATED TO THE 300M MATERIAL QUALITY ISSUE) AND THE PN AND SN COMBINATION IS NOT IN THIS SB, THEN REFER TO THE APPLICABLE  
CONCESSION DOCUMENTATION TO DETERMINE THE REMAINING LIFE OF THE PART.
Notes
01
02
03
Part Number SerialNumber Source Part Number SerialNumber Source
S2B07MDG604701−2117002−00, 50−2117002−50S2A06MDG584801−2117002−00, 50−2117002−50
S2B07MDG604601−2117002−00, 50−2117002−50S2A06MDG584701−2117002−00, 50−2117002−50
S2B07MDG604501−2117002−00, 50−2117002−50S2B06MDG584001−2117002−00, 50−2117002−50
S2B07MDG604401−2117002−00, 50−2117002−50S2B06MDG583901−2117002−00, 50−2117002−50
S2B07MDG604301−2117002−00, 50−2117002−50S2B06MDG583801−2117002−00, 50−2117002−50
S2B07MDG354701−2117002−00, 50−2117002−50S2B06MDG583701−2117002−00, 50−2117002−50
S2B07MDG354601−2117002−00, 50−2117002−50S2B06MDG583601−2117002−00, 50−2117002−50
S2B07MDG354501−2117002−00, 50−2117002−50S2B06MDG583501−2117002−00, 50−2117002−50
S2B07MDG354301−2117002−00, 50−2117002−50S2B06MDG583401−2117002−00, 50−2117002−50
S2B07MDG354201−2117002−5000,−2117002−50S2A06MDG495601−2117002−00, 50−2117002−50
S2B07MDG354101−2117002−00, 50−2117002−50S2A06MDG495501−2117002−00, 50−2117002−50
S2B07MDG354001−2117002−00, 50−2117002−50S2B06MDG495401−2117002−00, 50−2117002−50
S2B07MDG353901−2117002−00, 50−2117002−50S2B06MDG495301−2117002−00, 50−2117002−50
S2B07MDG353801−2117002−00, 50−2117002−50S2A06MDG495201−2117002−00, 50−2117002−50
S2A07MDG353701−2117002−00, 50−2117002−50S2A06MDG477701−2117002−00, 50−2117002−50
S2A07MDG119601−2117002−00, 50−2117002−50S2A06MDG477601−2117002−00, 50−2117002−50
S2A07MDG119501−2117002−00, 50−2117002−50S2C06MDG290401−2117002−00, 50−2117002−50
S2A07MDG119401−2117002−00, 50−2117002−50S2A06MDG290301−2117002−00, 50−2117002−50
S2A07MDG119301−2117002−00, 50−2117002−50S2B06MDG290001−2117002−00, 50−2117002−50
S2A07MDG119201−2117002−00, 50−2117002−50S2B06MDG289901−2117002−00, 50−2117002−50
S2A07MDG119101−2117002−00, 50−2117002−50S2C06MDG289801−2117002−5000,−2117002−50
S2A07MDG119001−2117002−00, 50−2117002−50S2C06MDG289701−2117002−00, 50−2117002−50
S2A07MDG118901−2117002−00, 50−2117002−50S2A06MDG283901−2117002−00, 50−2117002−50
S2A07MDG118801−2117002−00, 50−2117002−50S2A06MDG283801−2117002−00, 50−2117002−50
S2A07MDG118701−2117002−00, 50−2117002−50S2A06MDG283701−2117002−00, 50−2117002−50
S2A07MDG118601−2117002−00, 50−2117002−50S2A06MDG283601−2117002−00, 50−2117002−50
S2A07MDG118501−2117002−00, 50−2117002−50S2A06MDG283501−2117002−00, 50−2117002−50
S2A07MDG118401−2117002−00, 50−2117002−50S2A06MDG283401−2117002−00, 50−2117002−50
S2A07MDG118301−2117002−00, 50−2117002−50S2C06MDG283301−2117002−00, 50−2117002−50
S2A07MDG118201−2117002−00, 50−2117002−50S2C06MDG283201−2117002−00, 50−2117002−50
S2A07MDG118101−2117002−00, 50−2117002−50S2A06MDG281101−2117002−00, 50−2117002−50
S2A07MDG118001−2117002−00, 50−2117002−50S2A06MDG281001−2117002−00, 50−2117002−50
S2A07MDG117901−2117002−5000,−2117002−50S2A06MDG280901−2117002−00, 50−2117002−50
S2A06MDG1589801−2117002−00, 50−2117002−50S2A06MDG280801−2117002−00, 50−2117002−50
S2A06MDG1589101−2117002−00, 50−2117002−50S2A06MDG280701−2117002−00, 50−2117002−50
S2A06MDG1589001−2117002−00, 50−2117002−50S2A06MDG280601−2117002−00, 50−2117002−50
S2A06MDG1579801−2117002−00, 50−2117002−50S2C06MDG280501−2117002−00, 50−2117002−50
S2A06MDG1579701−2117002−00, 50−2117002−50S2A06MDG260501−2117002−00, 50−2117002−50
S2C06MDG1579601−2117002−00, 50−2117002−50S2A06MDG260401−2117002−00, 50−2117002−50 02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
F_SB_324310_7_AAAB_01_02
Figure A-U AAAB - S heet 01
Enhanced MLG Bogie Beams
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 44

@A340
SERVICE BULLETIN
Appendix 01 - Bogie Beams
**CONF 002
S2C06MDG1579501−2117002−00, 50−2117002−50
S2A9878/0501−2117002−00, 50−2117002−50S2A06MDG1579401−2117002−00, 50−2117002−50
S2A9630/0501−2117002−00, 50−2117002−50S2A06MDG1579301−2117002−00, 50−2117002−50
S2A9629/0501−2117002−00, 50−2117002−50S2C06MDG1442001−2117002−00, 50−2117002−50
S2A9628/0501−2117002−00, 50−2117002−50S2C06MDG1441901−2117002−00, 50−2117002−50
S2A9627/0501−2117002−00, 50−2117002−50S2A06MDG1441801−2117002−00, 50−2117002−50
S2A9626/0501−2117002−00, 50−2117002−50S2A06MDG1441701−2117002−00, 50−2117002−50
S2A9625/0501−2117002−00, 50−2117002−50S2C06MDG1441601−2117002−00, 50−2117002−50
S2A14909/0501−2117002−5000,−2117002−50S2C06MDG1441501−2117002−00, 50−2117002−50
S2A14908/0501−2117002−00, 50−2117002−50S2C06MDG1435601−2117002−00, 50−2117002−50
S2A14906/0501−2117002−00, 50−2117002−50S2C06MDG1435501−2117002−00, 50−2117002−50
S2C13952/0501−2117002−00, 50−2117002−50S2A06MDG1435401−2117002−00, 50−2117002−50
S2C13951/0501−2117002−00, 50−2117002−50S2A06MDG1435301−2117002−00, 50−2117002−50
S2C12450/0501−2117002−00, 50−2117002−50S2A06MDG1435201−2117002−00, 50−2117002−50
S2C12449/0501−2117002−00, 50−2117002−50S2A06MDG1435101−2117002−00, 50−2117002−50
S2A12448/0501−2117002−00, 50−2117002−50S2A06MDG1403401−2117002−00, 50−2117002−50
S2A12447/0501−2117002−00, 50−2117002−50S2A06MDG1403301−2117002−00, 50−2117002−50
S2A12246/0501−2117002−00, 50−2117002−50S2B06MDG1403201−2117002−00, 50−2117002−50
S2A12245/0501−2117002−00, 50−2117002−50S2A06MDG1394201−2117002−00, 50−2117002−50
S2A12244/0501−2117002−00, 50−2117002−50S2A06MDG1394101−2117002−5000,−2117002−50
S2B12030/0501−2117002−00, 50−2117002−50S2B06MDG1394001−2117002−00, 50−2117002−50
S2A12029/0501−2117002−00, 50−2117002−50S2B06MDG1393901−2117002−00, 50−2117002−50
S2B07MDG708401−2117002−00, 50−2117002−50S2B06MDG1393801−2117002−00, 50−2117002−50
S2B07MDG708301−2117002−00, 50−2117002−50S2B06MDG1393501−2117002−00, 50−2117002−50
S2B07MDG708201−2117002−00, 50−2117002−50S2B06MDG1393401−2117002−00, 50−2117002−50
S2B07MDG708101−2117002−00, 50−2117002−50S2A06MDG1217901−2117002−00, 50−2117002−50
S2A07MDG708001−2117002−00, 50−2117002−50S2A06MDG1215901−2117002−00, 50−2117002−50
S2A07MDG707901−2117002−00, 50−2117002−50S2A06MDG1215801−2117002−00, 50−2117002−50
S2A07MDG707801−2117002−5000,−2117002−50S2A06MDG1054901−2117002−00, 50−2117002−50
S2A07MDG707701−2117002−00, 50−2117002−50S2A06MDG1054801−2117002−00, 50−2117002−50
S2B07MDG696001−2117002−00, 50−2117002−50S2A06MDG1053901−2117002−00, 50−2117002−50
S2B07MDG695901−2117002−00, 50−2117002−50S2A06MDG1053801−2117002−00, 50−2117002−50
S2B07MDG695801−2117002−00, 50−2117002−50S2A06MDG1044301−2117002−00, 50−2117002−50
S2B07MDG605301−2117002−00, 50−2117002−50S2A06MDG1044201−2117002−00, 50−2117002−50
S2A07MDG605201−2117002−00, 50−2117002−50S2A06MDG1044101−2117002−00, 50−2117002−50
S2A07MDG605101−2117002−00, 50−2117002−50S2A06MDG1044001−2117002−00, 50−2117002−50
S2A07MDG605001−2117002−00, 50−2117002−50S2A06MDG1043901−2117002−5000,−2117002−50
S2A07MDG604901−2117002−00, 50−2117002−50S2A06MDG585001−2117002−00, 50−2117002−50
S2A07MDG604801−2117002−00, 50−2117002−50S2A06MDG584901−2117002−00, 50−2117002−50
Part Number SerialNumber Source Part Number SerialNumber Source
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
02−2117002−, 50
IF A PN AND SN COMBINATION IS NOT LISTED, REFER TO A340 ALS PART 1 AS APPLICABLE.01
02
NOTE:
IF A PART HAS PREVIOUSLY BEEN SUPPLIED UNDER CONCESSION ON LIFE LIMIT RECORDED IN EASA FORM 1 OR FAA FORM 8130−3 (WHICH WAS
ASSOCIATED TO THE 300M MATERIAL QUALITY ISSUE) AND THE PN AND SN COMBINATION IS NOT IN THIS SB, THE PART HAS BEEN SUBSEQUENTLY
DEEMED TO BE NOT AFFECTED AND THE LIFE LIMITS FOR THESE PARTS SHALL BE FOUND IN A340 ALS PART 1 AS APPLICABLE.
03 IF A PART HAS PREVIOUSLY BEEN SUPPLIED UNDER CONCESSION ON LIFE LIMIT RECORDED IN EASA FORM 1 OR FAA FORM 8130−3 (WHICH WAS NOT
ASSOCIATED TO THE 300M MATERIAL QUALITY ISSUE) AND THE PN AND SN COMBINATION IS NOT IN THIS SB, THEN REFER TO THE APPLICABLE  
CONCESSION DOCUMENTATION TO DETERMINE THE REMAINING LIFE OF THE PART.
Notes
01
02
03
F_SB_324310_7_AAAB_02_02
Figure A-U AAAB - S heet 02
Enhanced MLG Bogie Beams
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 45

@A340
SERVICE BULLETIN
Appendix 02 - Main Fittings
**CONF ALL
For the PN/SN of the affected Main Fittings, refer to
**CONF 001 Fig. A-UABAA
**CONF 002 Fig. A-UABAB
 and
**CONF 001 Fig. A-UACAA
**CONF 002 Fig. A-UACAB
 .
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 46

@A340
SERVICE BULLETIN
Appendix 02 - Main Fittings
**CONF 001
Part Number SerialNumber Source Part Number SerialNumber Source
S3MDMCAC0753M201488334, 201488335S3MDMCAC0373M201488324, 201488335
S3MDMCAC0719M201488334, 201488335S3MDMCAC0371M201488324, 201488335
S3MDMCAC0683M201488334, 201488335S3MDMCAC0369M201488324, 201488335
S3MDMCAC0643M201488334, 201488335S3MDMCAC0365M201488324, 201488335
S3MDMCAC0639M201488334, 201488335S3MDMCAC0361M201488324, 201488335
S3MDMCAC0631M201488334, 201488335S3MDMCAC0321M201488324, 201488335
S3MDMCAC0629M201488334, 201488335S3MDMCAC0315M201488324, 201488335
S3MDMCAC0621M201488334, 201488335S306MDM00871201488324, 201488335
S3MDMCAC0547M201488334, 201488335S306MDM00861201488324, 201488335
S3MDMCAC0523M201488334, 201488335S306MDM00859201488324, 201488335
S3MDMCAC0521M201488334, 201488335S306MDM00845201488324, 201488335
S3MDMCAC0517M201488334, 201488335S306MDM00843201488324, 201488335
S3MDMCAC0497M201488334, 201488335S306MDM00835201488324, 201488335
S3MDMCAC0485M201488334, 201488335S306MDM00833201488324, 201488335
S3MDMCAC0483M201488334, 201488335S306MDM00831201488324, 201488335
S3MDMCAC0481M201488334, 201488335S2CMMDMCAC0813201488324, 201488335
S3MDMCAC0477M201488334, 201488335S1MDMCAC0817M201488324, 201488335
S3MDMCAC0475M201488334, 201488335S1MDMCAC0815M201488324, 201488335
S3MDMCAC0473M201488334, 201488335S1MDMCAC0805M201488324, 201488335
S3MDMCAC0471M201488334, 201488335S1MDMCAC0793M201488324, 201488335
S3MDMCAC0467M201488334, 201488335S1MDMCAC0783M201488324, 201488335
S3MDMCAC0465M201488334, 201488335S1MDMCAC0773M201488324, 201488335
S3MDMCAC0463M201488334, 201488335S1MDMCAC0767M201488324, 201488335
S3MDMCAC0461M201488334, 201488335S1MDMCAC0759M201488324, 201488335
S3MDMCAC0447M201488334, 201488335S106MDM00869201488324, 201488335
S3MDMCAC0433M201488334, 201488335S106MDM00855201488324, 201488335
S3MDMCAC0431M201488334, 201488335S106MDM00853201488324, 201488335
S3MDMCAC0429M201488334, 201488335S106MDM00851201488324, 201488335
S3MDMCAC0427M201488334, 201488335S106MDM00849201488324, 201488335
S3MDMCAC0425M201488334, 201488335S106MDM00847201488324, 201488335
S3MDMCAC0421M201488334, 201488335S106MDM00841201488324, 201488335
S3MDMCAC0409M201488334, 201488335S106MDM00839201488324, 201488335
S3MDMCAC0391M201488334, 201488335S106MDM00837201488324, 201488335
S3MDMCAC0385M201488334, 201488335S106MDM00829201488324, 201488335
S3MDMCAC0383M201488334, 201488335S106MDM00827201488324, 201488335
S3MDMCAC0375M201488334, 201488335S106MDM00821201488324, 201488335
IF A PN AND SN COMBINATION IS NOT LISTED, REFER TO A340 ALS PART 1 AS APPLICABLE.01
02
NOTE:
IF A PART HAS PREVIOUSLY BEEN SUPPLIED UNDER CONCESSION ON LIFE LIMIT RECORDED IN EASA FORM 1 OR FAA FORM 8130−3 (WHICH WAS
ASSOCIATED TO THE 300M MATERIAL QUALITY ISSUE) AND THE PN AND SN COMBINATION IS NOT IN THIS SB, THE PART HAS BEEN SUBSEQUENTLY
DEEMED TO BE NOT AFFECTED AND THE LIFE LIMITS FOR THESE PARTS SHALL BE FOUND IN A340 ALS PART 1 AS APPLICABLE.
03 IF A PART HAS PREVIOUSLY BEEN SUPPLIED UNDER CONCESSION ON LIFE LIMIT RECORDED IN EASA FORM 1 OR FAA FORM 8130−3 (WHICH WAS NOT
ASSOCIATED TO THE 300M MATERIAL QUALITY ISSUE) AND THE PN AND SN COMBINATION IS NOT IN THIS SB, THEN REFER TO THE APPLICABLE  
CONCESSION DOCUMENTATION TO DETERMINE THE REMAINING LIFE OF THE PART.
Notes
01
02
03
F_SB_324310_7_ABAA_01_02
Figure A-U ABAA - S heet 01
Basic LH MLG Hybrid Standard and Growth Main Fitting
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 47

@A340
SERVICE BULLETIN
Appendix 02 - Main Fittings
**CONF 002
Part Number SerialNumber Source Part Number SerialNumber Source
S307MDM0021700−2107001−50S1MDMCAI0041M00−2107001−50
S306MDM0019900−2107001−50S1MDMCAI0039M00−2107001−50
S306MDM0019700−2107001−50S1MDMCAI0031M00−2107001−50
S306MDM0019500−2107001−50S1MDMCAI0027M00−2107001−50
S306MDM0019300−2107001−50S1MDMCAI0023M00−2107001−50
S306MDM0019100−2107001−50S1MDMCAI0017M00−2107001−50
S306MDM0017100−2107001−50S106MDM0016100−2107001−50
S306MDM0016900−2107001−50S106MDM0015100−2107001−50
S306MDM0016700−2107001−50S106MDM0013300−2107001−50
S306MDM0012500−2107001−50S106MDM0012900−2107001−50
S306MDM0011700−2107001−50S106MDM0012300−2107001−50
S306MDM0011500−2107001−50S106MDM0012100−2107001−50
S306MDM0011100−2107001−50S106MDM0011900−2107001−50
S306MDM0010300−2107001−50S106MDM0011300−2107001−50
S306MDM0010100−2107001−50S106MDM0010700−2107001−50
S306MDM0009900−2107001−50S106MDM0009300−2107001−50
S306MDM0009700−2107001−50S106MDM0008700−2107001−50
S306MDM0009500−2107001−50S106MDM0007700−2107001−50
S1MDMCAI0051M00−2107001−50S106MDM0007500−2107001−50
S1MDMCAI0049M00−2107001−50S106MDM0007300−2107001−50
S1MDMCAI0043M00−2107001−50S106MDM0006900−2107001−50
IF A PN AND SN COMBINATION IS NOT LISTED, REFER TO A340 ALS PART 1 AS APPLICABLE.01
02
NOTE:
IF A PART HAS PREVIOUSLY BEEN SUPPLIED UNDER CONCESSION ON LIFE LIMIT RECORDED IN EASA FORM 1 OR FAA FORM 8130−3 (WHICH WAS
ASSOCIATED TO THE 300M MATERIAL QUALITY ISSUE) AND THE PN AND SN COMBINATION IS NOT IN THIS SB, THE PART HAS BEEN SUBSEQUENTLY
DEEMED TO BE NOT AFFECTED AND THE LIFE LIMITS FOR THESE PARTS SHALL BE FOUND IN A340 ALS PART 1 AS APPLICABLE.
03 IF A PART HAS PREVIOUSLY BEEN SUPPLIED UNDER CONCESSION ON LIFE LIMIT RECORDED IN EASA FORM 1 OR FAA FORM 8130−3 (WHICH WAS NOT
ASSOCIATED TO THE 300M MATERIAL QUALITY ISSUE) AND THE PN AND SN COMBINATION IS NOT IN THIS SB, THEN REFER TO THE APPLICABLE  
CONCESSION DOCUMENTATION TO DETERMINE THE REMAINING LIFE OF THE PART.
Notes
01
02
03
F_SB_324310_7_ABAB_01_01
Figure A-U ABAB - S heet 01
Enhanced LH MLG Main Fitting
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 48

@A340
SERVICE BULLETIN
Appendix 02 - Main Fittings
**CONF 001
Part Number SerialNumber Source Part Number SerialNumber Source
S3MDMCAC0372M201488325, 201488336
S3MDMCAC0702M201488325, 201488336S3MDMCAC0366M201488325, 201488336
S3MDMCAC0610M201488325, 201488336S3MDMCAC0364M201488325, 201488336
S3MDMCAC0604M201488325, 201488336S3MDMCAC0352M201488325, 201488336
S3MDMCAC0586M201488325, 201488336S2CMDMCAC0790M201488325, 201488336
S3MDMCAC0574M201488325, 201488336S1MDMCAC0788M201488325, 201488336
S3MDMCAC0568M201488325, 201488336S1MDMCAC0784M201488325, 201488336
S3MDMCAC0516M201488325, 201488336S1MDMCAC0758M201488325, 201488336
S3MDMCAC0494M201488325, 201488336S1MDMCAC0754M201488325, 201488336
S3MDMCAC0490M201488325, 201488336S1MDMCAC0752M201488325, 201488336
S3MDMCAC0484M201488325, 201488336S1MDMCAC0750M201488325, 201488336
S3MDMCAC0472M201488325, 201488336S1MDMCAC0746M201488325, 201488336
S3MDMCAC0450M201488325, 201488336S1MDMCAC0744M201488325, 201488336
S3MDMCAC0440M201488325, 201488336S1MDMCAC0740M201488325, 201488336
S3MDMCAC0438M201488325, 201488336S106MDM00860201488325, 201488336
S3MDMCAC0432M201488325, 201488336S106MDM00840201488325, 201488336
S3MDMCAC0430M201488325, 201488336S106MDM00832201488325, 201488336
S3MDMCAC0428M201488325, 201488336S106MDM00830201488325, 201488336
S3MDMCAC0426M201488325, 201488336S106MDM00826201488325, 201488336
S3MDMCAC0424M201488325, 201488336S106MDM00824201488325, 201488336
S3MDMCAC0422M201488325, 201488336S106MDM00822201488325, 201488336
S3MDMCAC0420M201488325, 201488336S106MDM00818201488325, 201488336
S3MDMCAC0418M201488325, 201488336S106MDM00812201488325, 201488336
S3MDMCAC0410M201488325, 201488336S106MDM00810201488325, 201488336
IF A PN AND SN COMBINATION IS NOT LISTED, REFER TO A340 ALS PART 1 AS APPLICABLE.01
02
NOTE:
IF A PART HAS PREVIOUSLY BEEN SUPPLIED UNDER CONCESSION ON LIFE LIMIT RECORDED IN EASA FORM 1 OR FAA FORM 8130−3 (WHICH WAS
ASSOCIATED TO THE 300M MATERIAL QUALITY ISSUE) AND THE PN AND SN COMBINATION IS NOT IN THIS SB, THE PART HAS BEEN SUBSEQUENTLY
DEEMED TO BE NOT AFFECTED AND THE LIFE LIMITS FOR THESE PARTS SHALL BE FOUND IN A340 ALS PART 1 AS APPLICABLE.
03 IF A PART HAS PREVIOUSLY BEEN SUPPLIED UNDER CONCESSION ON LIFE LIMIT RECORDED IN EASA FORM 1 OR FAA FORM 8130−3 (WHICH WAS NOT
ASSOCIATED TO THE 300M MATERIAL QUALITY ISSUE) AND THE PN AND SN COMBINATION IS NOT IN THIS SB, THEN REFER TO THE APPLICABLE  
CONCESSION DOCUMENTATION TO DETERMINE THE REMAINING LIFE OF THE PART.
Notes
01
02
03
F_SB_324310_7_ACAA_01_01
Figure A-UACAA - Sheet 01
Basic RH MLG Hybrid Standard and Growth Main Fitting
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 49

@A340
SERVICE BULLETIN
Appendix 02 - Main Fittings
**CONF 002
Part Number SerialNumber Source Part Number SerialNumber Source
S106MDM0012600−2108001−50
S307MDM0021800−2108001−50S106MDM0011400−2108001−50
S307MDM0021600−2108001−50S106MDM0011200−2108001−50
S307MDM0021000−2108001−50S106MDM0009400−2108001−50
S307MDM0020800−2108001−50S106MDM0008800−2108001−50
S306MDM0020400−2108001−50S106MDM0008200−2108001−50
S306MDM0019200−2108001−50S106MDM0008000−2108001−50
S306MDM0019000−2108001−50S106MDM0007800−2108001−50
S306MDM0018800−2108001−50S106MDM0007200−2108001−50
S1MDMCAI0028M00−2108001−50S106MDM0006800−2108001−50
S1MDMCAI0020M00−2108001−50S106MDM0006400−2108001−50
S1MDMCAI0014M00−2108001−50S106MDM0006200−2108001−50
S1MDMCAI0010M00−2108001−50S106MDM0005400−2108001−50
S1MDMCAI0008M00−2108001−50S106MDM0005000−2108001−50
S106MDM0014600−2108001−50S106MDM0004800−2108001−50
S106MDM0014000−2108001−50S106MDM0004600−2108001−50
S106MDM0013800−2108001−50S106MDM0004400−2108001−50
IF A PN AND SN COMBINATION IS NOT LISTED, REFER TO A340 ALS PART 1 AS APPLICABLE.01
02
NOTE:
IF A PART HAS PREVIOUSLY BEEN SUPPLIED UNDER CONCESSION ON LIFE LIMIT RECORDED IN EASA FORM 1 OR FAA FORM 8130−3 (WHICH WAS
ASSOCIATED TO THE 300M MATERIAL QUALITY ISSUE) AND THE PN AND SN COMBINATION IS NOT IN THIS SB, THE PART HAS BEEN SUBSEQUENTLY
DEEMED TO BE NOT AFFECTED AND THE LIFE LIMITS FOR THESE PARTS SHALL BE FOUND IN A340 ALS PART 1 AS APPLICABLE.
03 IF A PART HAS PREVIOUSLY BEEN SUPPLIED UNDER CONCESSION ON LIFE LIMIT RECORDED IN EASA FORM 1 OR FAA FORM 8130−3 (WHICH WAS NOT
ASSOCIATED TO THE 300M MATERIAL QUALITY ISSUE) AND THE PN AND SN COMBINATION IS NOT IN THIS SB, THEN REFER TO THE APPLICABLE  
CONCESSION DOCUMENTATION TO DETERMINE THE REMAINING LIFE OF THE PART.
Notes
01
02
03
F_SB_324310_7_ACAB_01_01
Figure A-UACAB - Sheet 01
Enhanced RH MLG Main Fitting
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 5
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 50

@A340
SERVICE BULLETIN
Appendix 02 - Main Fittings
This Page Intentionally Left Blank
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 6
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 51

@A340
SERVICE BULLETIN
Appendix 03 - Sliding Pistons
**CONF ALL
For the PN/SN of the affected Sliding Pistons, refer to
**CONF 001 Fig. A-UADAA
**CONF 002 Fig. A-UADAB
 .
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 52

@A340
SERVICE BULLETIN
Appendix 03 - Sliding Pistons
**CONF 001
IF A PN AND SN COMBINATION IS NOT LISTED, REFER TO A340 ALS PART 1 AS APPLICABLE.01
02
NOTE:
IF A PART HAS PREVIOUSLY BEEN SUPPLIED UNDER CONCESSION ON LIFE LIMIT RECORDED 
IN EASA FORM 1 OR FAA FORM 8130−3 (WHICH WAS ASSOCIATED TO THE 300M MATERIAL 
Notes
01
02
03
QUALITY ISSUE) AND THE PN AND SN COMBINATION IS NOT IN THIS SB, THE PART HAS BEEN 
03 IF A PART HAS PREVIOUSLY BEEN SUPPLIED UNDER CONCESSION ON LIFE LIMIT RECORDED 
IN EASA FORM 1 OR FAA FORM 8130−3 (WHICH WAS NOT ASSOCIATED TO THE 300M MATERIAL
QUALITY ISSUE) AND THE PN AND SN COMBINATION IS NOT IN THIS SB, THEN REFER TO 
SUBSEQUENTLY DEEMED TO BE NOT AFFECTED AND THE LIFE LIMITS FOR THESE 
PARTS SHALL BE FOUND IN A340 ALS PART 1 AS APPLICABLE.
THE APPLICABLE CONCESSION DOCUMENTATION TO DETERMINE THE REMAINING
LIFE OF THE PART.
Part Number SerialNumber Source
S107B0698X1460201487307, 201487309
S107B0697X1459201487307, 201487309
S107B0696X1457201487307, 201487309
S107B0695X1456201487307, 201487309
S107B0694X1455201487307, 201487309
F_SB_324310_7_ADAA_01_01
Figure A-UADAA - Sheet 01
Standard Sliding Pistons
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 53

@A340
SERVICE BULLETIN
Appendix 03 - Sliding Pistons
**CONF 002
IF A PN AND SN COMBINATION IS NOT LISTED, REFER TO A340 ALS PART 1 AS APPLICABLE.01
02
NOTE:
IF A PART HAS PREVIOUSLY BEEN SUPPLIED UNDER CONCESSION ON LIFE LIMIT RECORDED 
IN EASA FORM 1 OR FAA FORM 8130−3 (WHICH WAS ASSOCIATED TO THE 300M MATERIAL 
QUALITY ISSUE) AND THE PN AND SN COMBINATION IS NOT IN THIS SB, THE PART HAS BEEN 
03 IF A PART HAS PREVIOUSLY BEEN SUPPLIED UNDER CONCESSION ON LIFE LIMIT RECORDED 
IN EASA FORM 1 OR FAA FORM 8130−3 (WHICH WAS NOT ASSOCIATED TO THE 300M MATERIAL
QUALITY ISSUE) AND THE PN AND SN COMBINATION IS NOT IN THIS SB, THEN REFER TO 
SUBSEQUENTLY DEEMED TO BE NOT AFFECTED AND THE LIFE LIMITS FOR THESE 
PARTS SHALL BE FOUND IN A340 ALS PART 1 AS APPLICABLE.
THE APPLICABLE CONCESSION DOCUMENTATION TO DETERMINE THE REMAINING
LIFE OF THE PART.
S1302−B004801−2109001−50
S1300−B004701−2109001−50
S1292−B004601−2109001−50
S1290−B004501−2109001−50
SourceSerialNumberPart Number Notes
01
02
03
F_SB_324310_7_ADAB_01_01
Figure A-UADAB - Sheet 01
Enhanced Sliding Pistons
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 54

@A340
SERVICE BULLETIN
Appendix 03 - Sliding Pistons
This Page Intentionally Left Blank
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 55

@A340
SERVICE BULLETIN
Appendix 04 - Life Limit
**CONF ALL
For the life limit of the affected components, refer to Fig. A-UAEAA
 .
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 56

@A340
SERVICE BULLETIN
Appendix 04 - Life Limit
**CONF ALL
THESE LIMITS APPLY TO PARTS ON WHICH SB A340−32−4259/VSB A33/34−32−257 (MOD 56498) HAS BEEN PERFORMED AFTER ACCUMULATION OF 8750 LDG.
THESE LIMITS APPLY TO PARTS ON WHICH SB A340−32−4259/VSB A33/34−32−257 (MOD 56498) HAS BEEN PERFORMED AT OR BEFORE ACCUMULATION OF 8750 LDG.
02
01
NOTE:
FH = FLIGHT HOURS
LDG = LANDINGS
CAL = CALENDAR TIME
THE INSTALLATION OF THE PARTS IDENTIFIED AS ’S3’ IS PROHIBITED ON A340−213 WV021 AND A340−313 WV027 POST MOD 46651.03
occurs first) −−
−
−−
Nomenclature Part Number Source
SafeL ife Limit
(which ever
Applicability
A340 2xx
Applicability
3xxA340
3xx
WV05xWV02xOtherWV027WV00x
−2xxCALLDGFH
Main fitting (LH)
201488324
201488335
210700150 00
S1
S1
S3
S3
S3
S2C
S1
S1
S1
S1
S3
S3
S3
S3
S2C
S1
S3 125,000
78,125
N/A
100,000
100,000
91,000
90,000
46,870
62,500
46,870
62,500
N/A
100,000
91,000
90,000
46,870
62,500 13,750
13,750
20,910
14,035
22,000
N/A
15,625
23,435
13,750
13,750
20,910
14,035
24,400
22,000
N/A
15,625
25,000 N/A
N/A
31/03/
N/A
09
N/A
N/A
N/A
N/A
N/A
N/A
N/A
31/03/09
N/A
N/A
N/A
N/A
N/A
XX
X
XX
X
XX X X
XX
X
(1)X(1)X(1)X(1)X
X (1)
X (2) X (2) X (2) X (2)
X (2)
X
XX X
X (1) X (1)
X (2) X (2)
XX
X
XX
X
01 01 01 01
01
0202 02 02
02
01
02
01
02
03
03
excl.MSN204
excl.MSN204
F_SB_324310_7_AEAA_01_03
Figure A-U AEAA - S heet 01
Life Limit
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 57

@A340
SERVICE BULLETIN
Appendix 04 - Life Limit
**CONF ALL
THESE LIMITS APPLY TO PARTS ON WHICH SB A340−32−4259/VSB A33/34−32−257 (MOD 56498) HAS BEEN PERFORMED AFTER ACCUMULATION OF 8750 LDG.
THESE LIMITS APPLY TO PARTS ON WHICH SB A340−32−4259/VSB A33/34−32−257 (MOD 56498) HAS BEEN PERFORMED AT OR BEFORE ACCUMULATION OF 8750 LDG.
02
01
NOTE:
FH = FLIGHT HOURS
LDG = LANDINGS
CAL = CALENDAR TIME
THE INSTALLATION OF THE PARTS IDENTIFIED AS ’S3’ IS PROHIBITED ON A340−213 WV021 AND A340−313 WV027 POST MOD 46651.03
Nomenclature Part Number Source
SafeL ife Limit
(which ever occurs first)
Applicability
A340−2xx
Applicability
A340−3xx
FH LDG CAL −2xx
−3xx
WV00x WV027 OtherWV02x WV05x
Main fitting (RH)
201488325
S1 62,500 13,750 N/AX X X X
S1 46,870 13,750 N/AX
S3 90,000 20,910 N/A excl.MSN204
S3 91,000 14,035 N/AX
S3 100,000 22,000 N/AX X
S2C N/A N/A 31/03/09 XX X X X
201488336
S1 62,500 15,625 N/AX (1) X (1) X (1) X (1)
S1 46,870 23,435 N/AX (1)
S1 62,500 13,750 N/AX (2) X (2) X (2) X (2)
S1 46,870 13,750 N/AX (2)
S3 90,000 20,910 N/A excl.MSN204
S3 91,000 14,035 N/AX
S3 100,000 24,400 N/AX (1) X (1)
S3 100,000 22,000 N/AX (2) X (2)
S2C N/A N/A 31/03/09 XX X X X
50−2108001−00
S1 78,125 15,625 N/AX X
S3 125,000 25,000 N/AX X
01 01 01 01
01
02 02
02
02 02
01
02 02
01
03
03
F_SB_324310_7_AEAA_02_02
Figure A-U AEAA - S heet 02
Life Limit
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 58

@A340
SERVICE BULLETIN
Appendix 04 - Life Limit
**CONF ALL
NOTE:
FH = FLIGHT HOURS
LDG = LANDINGS
CAL = CALENDAR TIME
Nomenclature Part Number Source
SafeL ife Limit
(which ever occurs first)
Applicability
A340−2xx
Applicability
A340−3xx
FH LDG CAL −2xx
−3xx
WV00x WV027 OtherWV02x WV05x
Bogie beam
201272304
S2A 56,810 14,200 N/AX X X X
S2A 42,610 21,305 N/AX
S2B 16,940 4,235 N/AX X X X
S2B 12,710 6,355 N/AX
S2C N/A N/A 31/03/09 XX X X X
201272307
S2A 56,810 14,200 N/AX X X X
S2A 42,610 21,305 N/AX
S2B 16,940 4,235 N/AX X X X
S2B 12,710 6,355 N/AX
S2C N/A N/A 31/03/09 XX X X X
S2A 56,810 14,200 N/AX X X X
S2A 42,610 21,305 N/AX
S2B 16,940 4,235 N/AX X X X
S2B 12,710 6,355 N/AX
S2C N/A N/A 31/03/09 XX X X X
201272308
F_SB_324310_7_AEAA_03_02
Figure A-U AEAA - S heet 03
Life Limit
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 59

@A340
SERVICE BULLETIN
Appendix 04 - Life Limit
**CONF ALL
NOTE:
FH = FLIGHT HOURS
LDG = LANDINGS
CAL = CALENDAR TIME
50−2117002−00
S2A&S 2B 125,000 25,000 N/AX X
S2C N/A N/A 31/03/09 XX
50−2117002−01
S2A&S 2B 125,000 25,000 N/AX X
S2C N/A N/A 31/03/09 XX
50−2117002−02
S2A&S 2B 125,000 25,000 N/AX X
S2C N/A N/A 31/03/09 XX
Nomenclature Part Number Source
SafeL ife Limit
(which ever occurs first)
Applicability
A340−2xx
Applicability
A340−3xx
FH LDG CAL −2xx
−3xx
WV00x WV027 OtherWV02x WV05x
Sliding piston
201487307
S1 56,250 12,310 N/A excl.MSN204
S1 49,500 9,810 N/AX
S1 62,500 15,625 N/A MSN204 XX
S1 44,750 22,375 N/AX
201487309
S1 62,500 15,625 N/AX X X X
S1 46,870 23,435 N/AX
50−2109001−01 S1 78,125 15,625 N/AX X
Bogie beam
F_SB_324310_7_AEAA_04_05
Figure A-U AEAA - S heet 04
Life Limit
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 5
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 60

@A340
SERVICE BULLETIN
Appendix 04 - Life Limit
This Page Intentionally Left Blank
DATE: Aug 08/16 SERVICE BULLETIN No.: A340-32-4310
REVISION No.: 02 - Jun 16/17 Page: 6
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

The text continues at https://openairdocs.org/service-documents/airbus/a340-32-4310/file/447d095beadf.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
