# Airbus Service Bulletin A340-32-4316

Copy: No revision named ("A340-32-4316 R00"), 69 pages: PDF https://openairdocs.org/files/sha256/fa/79/fa799d5dab7791353880fb5df39ded61488a5afa8c27c38c2f86384bb790bc11; text https://openairdocs.org/service-documents/airbus/a340-32-4316/file/fa799d5dab77.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2023-0011, the docket of AD 2023-12-19. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A340-32-4316
- Page: https://openairdocs.org/service-documents/airbus/a340-32-4316

## Text (69 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2023-0011, the docket of AD 2023-12-19. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A340
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
ATA SYSTEM: 32
TITLE: LANDING GEAR- MLG -INTRODUCE A NEW STD OF BASIC AND
GROWTH MLG BOGIE PIVOT PIN
**CONF ALL
MODIFICATIONS
MODIFICATION CLASSIFICATION
MAJOR
 207649H17111
MINOR
 None
NOTE
: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting the
airworthiness of the product. All other changes are major changes.
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
The bogie pivot pin links the MLG sliding tube to the bogie beam. This component is a principal
structural element.
There have been a number of in-service occurrences of damage being found in the form of chrome
detachment or cracking to the bogie pivot pin. In some cases the base metal has also displayed
corrosion and cracking. The root cause of the damage is due to operation on runways that increase the
pressure in the bogie pivot joint, leading to higher than acceptable energy production resulting in heat
damage.
The aim of this Service Bulletin is to improve the robustness of the bogie pivot pin in high pressure
velocity environments. This Service Bulletin is published to advise operators of A340 aircraft of the
issue of SAFRAN LANDING SYSTEMS UK Ltd Servic e Bulletin No. A33/34- 32-319 and A33/34-32-320.
SAFRAN LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319 and A33/34-32-320 details:
- A bogie pivot pin fabricated from CRES custom 465 H950 with chrome plating
- Sliding tube and bogie beam bushes fabricated from copper alloy (ToughMet 3) material with
ladder grooves
- Bogie pivot pin nut and collar fabricated from CRES 13-8 Mo H1000 with chrome plating
- Bolts and washers fabricated from CRES A286
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A340
SERVICE BULLETIN
SUMMARY
- MIL-PRF-23827 Type 1 grease.
This Service Bulletin is published to advise all operators of A340 aircraft of the issue of SAFRAN
LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319 and SAFRAN LANDING SYSTEMS
UK Ltd Service Bulletin No. A33/34-32-320 which replaces the bogie pivot pin.
Accomplishment of this Service Bulletin will improve the robustness of the bogie pivot pin in high
pressure/velocity environments, therefore becoming more resistant to localized overheating.
Accomplishment of this Service Bulletin cancels the requirements of AD 2012-0053 and Service Bulletin
No. A340-32-4281.
This Modification Service Bulletin concerns the airworthiness limitations of ALS Part 1 which is
introduced within the A/C maintenance program under the operator responsibility. Please download the
relevant ALS Variation on Airbus World.
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 RECOMMENDED (1)
 CANCELS INSPECTION SB
 YES
POTENTIAL AD
 NO
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 LROPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 YES
A/C MAINTENANCE
JACKING
YES
NOTE
 (1)
: Service Bulletin recommended to be accomplished to prevent significant operational
disruptions.
MATERIAL PRICE INFORMATION
**CONF 001
No Material
**CONF 002
No Material
EFFECTIVITY
**CONF ALL
This Service Bulletin is applicable to this (these) operator(s) :
01V 14S 15R 26L 31V 36L 39N 41N 65W 68M 74W 78U 83V
98W ABD AFR AIB ALD ARG AXY BEL BOE CAL D2F DGA DLH
EDW F2I GAF HFM HFY IRC IRM KAC KMF M3R MAU MDG MRJ
PAL PUE QQE ROI S3R SAA SAS SFB SLM SWR SYR TAP THT
THY U6A VCV
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A340
SERVICE BULLETIN
SUMMARY
CONCURRENT REQUIREMENTS
**CONF 001
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment of the
following Service Bulletin(s):
Service Bulletin No. A340-32-4185
A340-32-4249
A340-32-4279
NOTE
: Service Bulletin No. A340-32-4185 (LANDING GEAR - MAIN GEAR - INTRODUCE
GROWTH SLIDING PISTON AND BEARING HOUSING ON TO BASIC AIRCRAFT)
applies MOD No. 50114H14459.
NOTE
: Service Bulletin No. A340-32-4249 (LANDING GEAR - MAIN GEAR - INTRODUCE
GROWTH SLIDING PISTON ON TO BASIC M AIN FITTING) applies MOD No.
55907H15986.
NOTE
: Service Bulletin No.A340-32-4279 (LANDING GEAR - MAIN GEAR - IMPROVED 2-
PART PAINT SCHEME FOR BASIC, GROWTH AND ENHANCED MLG BOGIE BEAM)
applies MOD No. 58896H16355.
**CONF 002
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment of the
following Service Bulletin(s):
Service Bulletin No. A340-32-4279
NOTE
: Service Bulletin No.A340-32-4279 (LANDING GEAR - MAIN GEAR - IMPROVED 2-
PART PAINT SCHEME FOR BASIC, GROWTH AND ENHANCED MLG BOGIE BEAM)
applies MOD No. 58896H16355.
REFERENCES / REPERCUSSIONS
**CONF ALL
TFU
 None
OEB
 None
AOT
 None
SIL
 None
ISI
 None
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 None
NATURE OF THE WORK
AIRCRAFT
 NO
EQUIPMENT
 YES
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A340
SERVICE BULLETIN
SUMMARY
MANPOWER
**CONF 001
Task 324316-831-895-001: Modification by Replacement of the Bogie Pivot Pin in accordance
with VSB
TOTAL MANHOURS
 24.00
ELAPSED TIME (HOURS)
 7.25
Additional manhours relat ed to Vendor SB; refer to:
Modify the MLG, LH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-319
Modify the MLG, RH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-319
Install the Bogie Pivot Pin, LH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-319
Install the Bogie Pivot Pin, RH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-319
Re-identify the MLG, LH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-319
Re-identify the MLG, RH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-319
**CONF 002
Task 324316-831-895-001: Modification by Replacement of the Bogie Pivot Pin in accordance
with VSB
TOTAL MANHOURS
 24.00
ELAPSED TIME (HOURS)
 7.25
Additional manhours relat ed to Vendor SB; refer to:
Modify the MLG, LH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-320
Modify the MLG, RH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-320
Install the Bogie Pivot Pin, LH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-320
Install the Bogie Pivot Pin, RH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-320
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A340
SERVICE BULLETIN
SUMMARY
Task 324316-831-895-001: Modification by Replacement of the Bogie Pivot Pin in accordance
with VSB
Re-identify the MLG, LH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-320
Re-identify the MLG, RH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-320
APPENDICES
**CONF ALL
Appendix 01 - Manpower Gantt Chart
Appendix 02 - Glossary
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 5
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A340
SERVICE BULLETIN
SUMMARY
**CONF ALL
A
LH SHOWN
RH SYMMETRICAL
RE−IDENTIFICATION OF THE BOGIE
AND DRESSINGS,                LH5010GM
5011GMAND                RH
RE−IDENTIFICATION OF THE STRUT−MAIN
MODIFICATION OF THE BOGIE PIVOT PIN
AND DRESSINGS,                LH5018GM
5019GMAND                RH
A
Z731
A
Z741
F_SB_324316_7_SAAA_01_00
Figure A-USAAA - Sheet 01
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 6
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A340
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
ATA SYSTEM: 32
TITLE: LANDING GEAR- MLG -INTRODUCE A NEW STD OF BASIC AND
GROWTH MLG BOGIE PIVOT PIN
MODIFICATION No.: 207649H17111
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
NOTE
: This Service Bulletin is only applicable to the aircraft equipped with a basic or
growth MLG on which MOD No. 54500H15561 is not embodied.
NOTE
: This Service Bulletin is not applicable to the aircraft on which the Service
Bulletin No. A340-32-4256 is embodied.
NOTE
: This modification is applicable by Service Bulletin only.
(1) Models
340-211 340-212 340-213 340-311 340-312 340-313
(2) Effectivity by MSN
0002 0004 0009 0014 0020 0022 0026 0029 0031 0038 0041 0043-0044 0046-0047
0051 0056 0058 0061 0063 0074-0076 0078-0081 0084 0089-0091 0093-0094 0101
0104 0115 0117 0123 0125-0126 0128 0134-0135 0145-0146 0151-0152 0156
0158-0159 0163-0164 0166-0168 0170 0174-0175 0178-0180 0185-0186 0190
0192-0194 0197 0199 0201-0202 0204 0207-0208 0210 0212-0213 0215 0217 0221
0233 0236-0237 0242-0243 0245-0246 0252 0257 0260 0264 0268 0270 0274 0278
0280 0282 0292 0297 0302 0304 0307 0310 0318-0319 0321 0325 0327 0329
0331-0332 0335 0347 0352 0354-0355 0367 0373-0374 0377-0379 0381 0385 0387
0390 0395 0399 0402 0406 0411 0413 0415 0424 0430 0433-0435 0438 0446-0447
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A340
SERVICE BULLETIN
0450 0459 0467 0470 0474 0483 0528 0538 0541 0544-0546 0554 0556 0559
0561-0562 0582 0585 0590 0598 0643 0646 0651 0668
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
01V
 0146
14S
 0058 0152
15R
 0151
26L
 0125 0134 0145 0217 0221 0329
31V
 0093
36L
 0406
39N
 0168 0174
41N
 0009
65W
 0029 0208
68M
 0078
74W
 0047 0051
78U
 0175 0179
83V
 0280
98W
 0014 0022
ABD
 0210
AFR
 0186 0207 0245 0246 0260 0377
AIB
 0192 0243 0264
ALD
 0156 0159 0178
ARG
 0063 0074 0080 0123 0126 0170 0193
AXY
 0374
BEL
 0335 0354
BOE
 0554
CAL
 0402 0411 0415 0433 0541
D2F
 0128
DGA
 0075 0081
DLH
 0135 0158 0213 0233 0252 0297 0304 0321 0325 0327 0347 0352
0379 0390 0434 0447
EDW
 0556 0559 0561 0562
F2I
 0038 0043 0084 0094 0117 0237 0307 0310
GAF
 0274 0355
HFM
 0163 0166 0185 0236 0367 0483
HFY
 0190 0202
IRC
 0002
IRM
 0020 0056 0164 0282 0292
KAC
 0089 0090 0101 0104
KMF
 0278 0318 0387
M3R
 0061
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A340
SERVICE BULLETIN
OPERATOR
 MSN
MAU
 0076 0194 0268
MDG
 0319
MRJ
 0257
PAL
 0302 0332 0459 0474
PUE
 0212 0215 0399
QQE
 0026 0528
ROI
 0199 0201
S3R
 0004 0204
SAA
 0197 0378 0544 0582 0590 0643 0646 0651
SAS
 0167 0413 0424 0430 0435 0450 0467 0470
SFB
 0046
SLM
 0242
SWR
 0538 0545 0546 0585 0598
SYR
 0381
TAP
 0041 0044 0079 0091
THT
 0385 0395 0438 0446 0668
THY
 0115 0180 0270 0331
U6A
 0373
VCV
 0031
(4) Configuration by MSN
MSN
 CONFIGURATION
0002 0004 0009 0014 0020 0022 0026 0029 0031 0038 0041
0043 0044 0046 0047 0051 0056 0058 0061 0063 0074 0075
0076 0078 0079 0080 0081 0084 0089 0090 0091 0093 0094
0101 0104 0115 0117 0123 0125 0126 0128 0134 0135 0145
0146 0151 0152 0156 0158 0159 0163 0164 0166 0167 0168
0170 0174 0175 0178 0179 0180 0185 0186 0190 0192 0193
0194 0197 0199 0201 0202 0204 0207 0208 0210 0212 0213
0215 0217 0221 0233 0236 0237 0242 0243 0245 0246 0252
0257 0260 0264 0268 0270 0274 0278 0280 0282 0292 0297
0302 0304 0307 0310 0318 0319 0321 0325 0327 0329 0331
0332 0335 0347 0352 0354 0355 0367 0373 0374 0377 0378
0379 0381 0385 0387 0390 0395 0399 0402 0406 0411 0413
0415 0424 0430 0433 0434 0435 0438 0446 0447 0450 0459
0467 0470 0474 0483 0528 0538 0541 0544 0545 0546 0554
0556 0559 0561 0562 0582 0585 0590 0598 0643 0646 0651
0668
001 002
(5) Configuration definition
**CONF 001
Config. 001 is valid for all the aircraft on which the basic MLG is fitted.
**CONF 002
Config. 002 is valid for all the aircraft on which the growth MLG is fitted.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A340
SERVICE BULLETIN
(6) Material Effectivity
**CONF 001
MATERIAL
 QTY PER A/C
 SEE NOTES
Reidentified part set REIDB01
 1
Consumable CMLB01
 1
**CONF 002
MATERIAL
 QTY PER A/C
 SEE NOTES
Reidentified part set REIDB02
 1
Consumable CMLB01
 1
**CONF ALL
B. CONCURRENT REQUIREMENTS
**CONF 001
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment of
the following Service Bulletin(s):
Service Bulletin No. A340-32-4185
A340-32-4249
A340-32-4279
NOTE
: Service Bulletin No. A340-32-4185 (LANDING GEAR - MAIN GEAR -
INTRODUCE GROWTH SLIDING PISTON AND BEARING HOUSING ON TO
BASIC AIRCRAFT) applies MOD No. 50114H14459.
NOTE
: Service Bulletin No. A340-32-4249 (LANDING GEAR - MAIN GEAR -
INTRODUCE GROWTH SLIDING PISTON ON TO BASIC MAIN FITTING)
applies MOD No. 55907H15986.
NOTE
: Service Bulletin No.A340-32-4279 (LANDING GEAR - MAIN GEAR -
IMPROVED 2- PART PAINT SCHEME FOR BASIC, GROWTH AND
ENHANCED MLG BOGIE BEAM ) applies MOD No. 58896H16355.
**CONF 002
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment of
the following Service Bulletin(s):
Service Bulletin No. A340-32-4279
NOTE
: Service Bulletin No.A340-32-4279 (LANDING GEAR - MAIN GEAR -
IMPROVED 2- PART PAINT SCHEME FOR BASIC, GROWTH AND
ENHANCED MLG BOGIE BEAM ) applies MOD No. 58896H16355.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A340
SERVICE BULLETIN
**CONF ALL
C. REASON
(1) History
The bogie pivot pin links the MLG sliding tube to the bogie beam. This component is a
principal structural element.
There have been a number of in-service occurrences of damage being found in the form
of chrome detachment or cracking to the bogie pivot pin. In some cases the base metal
has also displayed corrosion and cracking. The root cause of the damage is due to
operation on runways that increase the pressure in the bogie pivot joint, leading to
higher than acceptable energy production resulting in heat damage.
(2) Objective/Action
The aim of this Service Bulletin is to improve the robustness of the bogie pivot pin
in high pressure velocity environments. This Service Bulletin is published to advise
operators of A340 aircraft of the issue o f SAFRAN LANDING SYSTEMS UK Ltd Service
Bulletin No. A33/34-32-319 and A33/34-32-320.
SAFRAN LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319 and
A33/34-32-320 details:
- A bogie pivot pin fabricated from CRES custom 465 H950 with chrome plating
- Sliding tube and bogie beam bushes fabricated from copper alloy (ToughMet 3)
material with ladder grooves
- Bogie pivot pin nut and collar fabricated from CRES 13-8 Mo H1000 with chrome
plating
- Bolts and washers fabricated from CRES A286
- MIL-PRF-23827 Type 1 grease.
This Service Bulletin is published to advise all operators of A340 aircraft of the issue of
SAFRAN LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319 and SAFRAN
LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320 which replaces the
bogie pivot pin.
(3) Advantages
Accomplishment of this Service Bulletin will improve the robustness of the bogie
pivot pin in high pressure/velocity environments, therefore becoming more resistant to
localized overheating.
(4) Operational/Maintenance Consequences
Accomplishment of this Service Bulletin cancels the requirements of AD 2012-0053 and
Service Bulletin No. A340-32-4281.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 5
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A340
SERVICE BULLETIN
This Modification Service Bulletin concerns the airworthiness limitations of ALS Part
1 which is introduced within the A/C maintenance program under the operator
responsibility. Please download the relevant ALS Variation on Airbus World.
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
**CONF 001
Task 324316-831-895-001: Modification by Replacement of the Bogie Pivot Pin in accordance
with VSB
(1) Remove the Bogie Pivot Pin, LH side
(2) Remove the Bogie Pivot Pin, RH side
(3) Modify the MLG, LH side
(4) Modify the MLG, RH side
(5) Preparation for Installation, LH side
(6) Preparation for Installation, RH side
(7) Install the Bogie Pivot Pin, LH side
(8) Install the Bogie Pivot Pin, RH side
(9) Re-identify the MLG, LH side
(10) Re-identify the MLG, RH side
**CONF 002
Task 324316-831-895-001: Modification by Replacement of the Bogie Pivot Pin in accordance
with VSB
(1) Remove the Bogie Pivot Pin, LH side
(2) Remove the Bogie Pivot Pin, RH side
(3) Modify the MLG, LH side
(4) Modify the MLG, RH side
(5) Preparation for Installation, LH side
(6) Preparation for Installation, RH side
(7) Install the Bogie Pivot Pin, LH side
(8) Install the Bogie Pivot Pin, RH side
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 6
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A340
SERVICE BULLETIN
(9) Re-identify the MLG, LH side
(10) Re-identify the MLG, RH side
**CONF ALL
E. COMPLIANCE
(1) Classification
RECOMMENDED: Service Bulletin recommended to be accomplished to prevent
significant operational disruptions.
(2) Accomplishment Timescale
Accomplishment of this Service Bulletin is recommended at the earliest opportunity
where manpower and facilities are available or at overhaul.
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA.21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
**CONF 001
Task 324316-831-895-001: Modification by Replacement of the Bogie Pivot Pin in accordance
with VSB
Get Access
 7.50
On Aircraft
Remove the Bogie Pivot Pin, LH side
 2.00
Remove the Bogie Pivot Pin, RH side
 2.00
Preparation for Installation, LH side
 1.00
Preparation for Installation, RH side
 1.00
Tests
 4.00
Close-Up
 6.50
TOTAL MANHOURS
 24.00
ELAPSED TIME (HOURS)
 7.25
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 7
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A340
SERVICE BULLETIN
Task 324316-831-895-001: Modification by Replacement of the Bogie Pivot Pin in accordance
with VSB
Additional manhours relat ed to Vendor SB; refer to:
Modify the MLG, LH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-319
Modify the MLG, RH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-319
Install the Bogie Pivot Pin, LH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-319
Install the Bogie Pivot Pin, RH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-319
Re-identify the MLG, LH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-319
Re-identify the MLG, RH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-319
NOTE
: For an explanation of the man-hours and elapsed time, refer to the Gantt
Chart, Fig. A-UAAAA
 given in Appendix 01 - Manpower Gantt Chart .
**CONF 002
Task 324316-831-895-001: Modification by Replacement of the Bogie Pivot Pin in accordance
with VSB
Get Access
 7.50
On Aircraft
Remove the Bogie Pivot Pin, LH side
 2.00
Remove the Bogie Pivot Pin, RH side
 2.00
Preparation for Installation, LH side
 1.00
Preparation for Installation, RH side
 1.00
Tests
 4.00
Close-Up
 6.50
TOTAL MANHOURS
 24.00
ELAPSED TIME (HOURS)
 7.25
Additional manhours relat ed to Vendor SB; refer to:
Modify the MLG, LH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-320
Modify the MLG, RH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-320
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 8
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A340
SERVICE BULLETIN
Task 324316-831-895-001: Modification by Replacement of the Bogie Pivot Pin in accordance
with VSB
Install the Bogie Pivot Pin, LH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-320
Install the Bogie Pivot Pin, RH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-320
Re-identify the MLG, LH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-320
Re-identify the MLG, RH side
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-320
NOTE
: For an explanation of the man-hours and elapsed time, refer to the Gantt
Chart, Fig. A-UAAAA
 given in Appendix 01 - Manpower Gantt Chart .
**CONF ALL
H. WEIGHT AND BALANCE
**CONF 001
The weight and balance estimates given in this Service Bulletin are based on the
Manufacturer’s Empty Weight (MEW) and do not include operator’s items. For the definition of
MEW and operator’s items, refer to the Weight and Balance Manual (WBM).
It is recommended to weigh the aircraft after accomplishment of this Service Bulletin if
operator’s items have been permanently removed and/or installed.
MANUFACTURERS EMPTY
WEIGHT
+12.6 KG
 (+27.8 LB)
EFFECT ON BALANCE
 +457 KGM
 (+3305.4 LB.FT)
A340-200 aircraft
MANUFACTURERS EMPTY
WEIGHT
+12.6 KG
 (+27.8 LB)
EFFECT ON BALANCE
 +483.8 KGM
 (+3499.3 LB.FT)
A340-300 aircraft
**CONF 002
The weight and balance estimates given in this Service Bulletin are based on the
Manufacturer’s Empty Weight (MEW) and do not include operator’s items. For the definition of
MEW and operator’s items, refer to the Weight and Balance Manual (WBM).
It is recommended to weigh the aircraft after accomplishment of this Service Bulletin if
operator’s items have been permanently removed and/or installed.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 9
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A340
SERVICE BULLETIN
MANUFACTURERS EMPTY
WEIGHT
+9.8 KG
 (+21.6 LB)
EFFECT ON BALANCE
 +355.8 KGM
 (+2573.5 LB.FT)
A340-200 aircraft
MANUFACTURERS EMPTY
WEIGHT
+9.8 KG
 (+21.6 LB)
EFFECT ON BALANCE
 +376.7 KGM
 (+2724.7 LB.FT)
A340-300 aircraft
**CONF ALL
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
**CONF 001
Aircraft Maintenance Manual (AMM)
 06-20-00 07-11-00 12-34-24
20-21-11 32-00-00 32-11-14
Consumable Material List (CML)
Component Maintenance Manual Vendor (CMMv)
 32-11-74 32-11-96 32-11-97
32-12-03 32-12-05
ATA Common Support Data Dictionary (CSDD),
Chapter 2
Elec. Std. Practices Manual (ESPM)
 20-55-00
Service Bulletin (SB)
 A340-32-4185
A340-32-4249
A340-32-4279
Structural Repair Manual (SRM)
 51-24-00 51-42-00 51-43-00
Vendor Service Bulletin (VSB)
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-319
SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-320
Weight and Balance Manual (WBM)
**CONF 002
Aircraft Maintenance Manual (AMM)
 06-20-00 07-11-00 12-34-24
20-21-11 32-00-00 32-11-14
Consumable Material List (CML)
Component Maintenance Manual Vendor (CMMv)
 32-11-74 32-11-96 32-11-97
32-12-03 32-12-05
ATA Common Support Data Dictionary (CSDD),
Chapter 2
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 10
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A340
SERVICE BULLETIN
Elec. Std. Practices Manual (ESPM)
 20-55-00
Service Bulletin (SB)
 A340-32-4279
Structural Repair Manual (SRM)
 51-24-00 51-42-00 51-43-00
Vendor Service Bulletin (VSB)
 SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-319
SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No.
A33/34-32-320
Weight and Balance Manual (WBM)
**CONF ALL
K. PUBLICATION AFFECTED
Aircraft Maintenance Manual (AMM)
 32-11-14
Illustrated Parts Catalog (IPC)
 32-11-11
L. INTERCHANGEABILITY/MIXABILITY
The interchangeability/mixability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
**CONF 001
DESCRIPTION
 OLD PART N˚
 NEW PART N˚
 INT
 MIXABILITY
 SEE
NOTES
Bogie And Dressings
 201486003-040
 201486003-045
 01
 Not
Applicable
(1) (2) (3)
(4)
Bogie And Dressings
 201486XXX-XXX
 201486XXX-XXX
 01
 Not
Applicable
(2) (3) (4)
(5)
Strut-Main And
Dressings
201254035-065
 201254035-070
 01
 Not
Applicable
(2) (3) (6)
Strut-Main And
Dressings
201254036-065
 201254036-070
 01
 Not
Applicable
(2) (3) (6)
Strut-Main And
Dressings
201254XXX-XXX
 201254XXX-XXX
 01
 Not
Applicable
(2) (3) (7)
Bogie And Dressings
 201274XXX-XXX
 201274XXX-XXX
 01
 Not
Applicable
(2) (3) (4)
(8)
NOTE
: For definitions of interchangeability codes in column INT., refer to ATA
Common Support Data Dictionary (CSDD), Chapter 2.
NOTE
 (1)
: Old PN does not have Strike No. 28 cancelled. New PN has strike No. 28
cancelled.
NOTE
 (2)
: The Post-MOD part number can replace the Pre-MOD part number.
The Pre-MOD part number cannot replace the Post-MOD part number.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 11
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A340
SERVICE BULLETIN
NOTE
 (3)
: For the interchangeability of detail parts for the A/C on which basic MLG is
fitted as well as for CONF 001, refe r to SAFRAN LANDING SYSTEMS UK Ltd
Service Bulletin No. A33/34-32-319.
NOTE
 (4)
: For the interchangeability of detail parts for the A/C on which growth MLG is
fitted as well as for CONF 002, refe r to SAFRAN LANDING SYSTEMS UK Ltd
Service Bulletin No. A33/34-32-320.
NOTE
 (5)
: XXX-XXX shows the last six digits of any Bogie and Dressings part number
beginning with 201486. Old PN does not have Strike No. 28 cancelled. New
PN has strike No. 28 cancelled.
NOTE
 (6)
: Old PN does not have Strike No. 116 cancelled. New PN has strike No. 116
cancelled.
NOTE
 (7)
: XXX-XXX shows the last six digits of any Main Strut and Dressing part
number beginning with 201254. Old PN does not have Strike No. 116
cancelled. New PN has strike No. 116 cancelled.
NOTE
 (8)
: XXX-XXX shows the last six digits of any Bogie and Dressings part number
beginning with 201274. Old PN does not have Strike No. 28 cancelled. New
PN has strike No. 28 cancelled.
**CONF 002
DESCRIPTION
 OLD PART N˚
 NEW PART N˚
 INT
 MIXABILITY
 SEE
NOTES
Bogie And Dressings
 201486003-040
 201486003-045
 01
 Not
Applicable
(1) (2) (3)
(4)
Bogie And Dressings
 201486XXX-XXX
 201486XXX-XXX
 01
 Not
Applicable
(2) (3) (4)
(5)
Strut-Main And
Dressings
201489001-195
 201489001-200
 01
 Not
Applicable
(2) (4) (6)
Strut-Main And
Dressings
201489XXX-XXX
 201489XXX-XXX
 01
 Not
Applicable
(2) (4) (7)
Strut-Main And
Dressings
201489002-195
 201489002-200
 01
 Not
Applicable
(2) (4) (6)
Bogie And Dressings
 201274XXX-XXX
 201274XXX-XXX
 01
 Not
Applicable
(2) (3) (4)
(8)
NOTE
: For definitions of interchangeability codes in column INT., refer to ATA
Common Support Data Dictionary (CSDD), Chapter 2.
NOTE
 (1)
: Old PN does not have Strike No. 28 cancelled. New PN has strike No. 28
cancelled.
NOTE
 (2)
: The Post-MOD part number can replace the Pre-MOD part number.
The Pre-MOD part number cannot replace the Post-MOD part number.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 12
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A340
SERVICE BULLETIN
NOTE
 (3)
: For the interchangeability of detail parts for the A/C on which basic MLG is
fitted as well as for CONF 001, refe r to SAFRAN LANDING SYSTEMS UK Ltd
Service Bulletin No. A33/34-32-319.
NOTE
 (4)
: For the interchangeability of detail parts for the A/C on which growth MLG is
fitted as well as for CONF 002, refe r to SAFRAN LANDING SYSTEMS UK Ltd
Service Bulletin No. A33/34-32-320.
NOTE
 (5)
: XXX-XXX shows the last six digits of any Bogie and Dressings part number
beginning with 201486. Old PN does not have Strike No. 28 cancelled. New
PN has strike No. 28 cancelled.
NOTE
 (6)
: Old PN does not have Strike No. 116 cancelled. New PN has strike No. 116
cancelled.
NOTE
 (7)
: XXX-XXX shows the last six digits of any Main Strut and Dressing part
number beginning with 201489. Old PN does not have Strike No. 116
cancelled. New PN has strike No. 116 cancelled.
NOTE
 (8)
: XXX-XXX shows the last six digits of any Bogie and Dressings part number
beginning with 201274. Old PN does not have Strike No. 28 cancelled. New
PN has strike No. 28 cancelled.
**CONF ALL
M. SPARES
Collar 201042188
Collar 201042663
Pin 201254925
Nut 201269613
Bogie Pivot-Bush 201485613
Sliding Pivot-Bush 201487600
Sliding Pivot-Bush 201487626
Nut 201489622
Pin 201489751
The parts listed here must not be installed anymore on aircraft which have accomplished this
Service Bulletin or which have the equivalent production modification embodied.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 13
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A340
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 14
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A340
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
No Material Set
B. INDUSTRY SUPPORT INFORMATION
AIRBUS will not provide industry support for accomplishment of this Service Bulletin.
Refer to SAFRAN LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319 and
SAFRAN LANDING SYSTEMS UK Ltd Service Bu lletin No. A33/34- 32-320 for industry
support terms of vendor Service Bulletin parts and labor.
SAFRAN LANDING SYSTEMS UK Ltd
CHELTENHAM ROAD EAST
GLOUCESTER
GL2 9QH
GLOUCESTERSHIRE
UNITED KINGDOM
as per SAFRAN LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319 and
SAFRAN LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
C. LIST OF COMPONENTS
No Kit
D. LIST OF MATERIALS - OPERATOR SUPPLIED
(1) Consumable Materials
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO CML
MAT. No.
QTY PER A/C
 SEE
NOTES
Mineral Oil Base Grease-Anti-Seize
Lithium Thicke
03FCC2
 As required
Synthetic Oil Base Grease-General
Purpose Lithium
03GBC1
 As required
 (1)
Non Aqueous Cleaner-General
 08BAA9
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
NOTE
 (1)
: Use MIL-PRF-23827 TYPE 1 grease.
(2) Components
NOTE
: To accomplish this Service Bulletin it is necessary to use the expendable
parts listed in the subsequent referenced task:
- AMM Task 32-11-14-400-801.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 15
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A340
SERVICE BULLETIN
(3) Equipment
None
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
Reidentified part set REIDB01
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
9
 201486003-045
 BOGIE
 (9)
 201486003-040
 (1)
201254035-070
 STRUT
 201254035-065
 (2)
201254036-070
 STRUT
 201254036-065
 (2)
201254XXX-XXX
 STRUT
 201254XXX-XXX
 (3) (3)
201274XXX-XXX
 BOGIE
 201274XXX-XXX
 (4) (4)
201486XXX-XXX
 BOGIE
 201486XXX-XXX
 (5) (5)
NOTE
: For the re-identification of detail parts and sub-assemblies for the A/C on
which basic MLG is fitted as well as for CONF 001, refer to SAFRAN
LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
NOTE
 (1)
: Old PN does not have Strike No. 28 cancelled. New PN has strike No. 28
cancelled.
NOTE
 (2)
: Old PN does not have Strike No. 116 cancelled. New PN has strike No. 116
cancelled.
NOTE
 (3)
: XXX-XXX shows the last six digits of any Main Strut and Dressing part
number beginning with 201254. Old PN does not have Strike No. 116
cancelled. New PN has strike No. 116 cancelled.
NOTE
 (4)
: XXX-XXX shows the last six digits of any Bogie and Dressings part number
beginning with 201274. Old PN does not have Strike No. 28 cancelled. New
PN has strike No. 28 cancelled.
NOTE
 (5)
: XXX-XXX shows the last six digits of any Bogie and Dressings part number
beginning with 201486. Old PN does not have Strike No. 28 cancelled. New
PN has strike No. 28 cancelled.
Reidentified part set REIDB02
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
9
 201486003-045
 BOGIE
 (9)
 201486003-040
 (1)
201274XXX-XXX
 BOGIE
 201274XXX-XXX
 (2) (2)
201486XXX-XXX
 BOGIE
 201486XXX-XXX
 (3) (3)
201489001-200
 STRUT
 201489001-195
 (4)
201489002-200
 STRUT
 201489002-195
 (4)
201489XXX-XXX
 STRUT
 201489XXX-XXX
 (5) (5)
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 16
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A340
SERVICE BULLETIN
NOTE
: For the re-identification of detail parts and sub-assemblies for the A/C on
which growth MLG is fitted as well as for CONF 002, refer to SAFRAN
LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
NOTE
 (1)
: Old PN does not have Strike No. 28 cancelled. New PN has strike No. 28
cancelled.
NOTE
 (2)
: XXX-XXX shows the last six digits of any Bogie and Dressings part number
beginning with 201274. Old PN does not have Strike No. 28 cancelled. New
PN has strike No. 28 cancelled.
NOTE
 (3)
: XXX-XXX shows the last six digits of any Bogie and Dressings part number
beginning with 201486. Old PN does not have Strike No. 28 cancelled. New
PN has strike No. 28 cancelled.
NOTE
 (4)
: Old PN does not have Strike No. 116 cancelled. New PN has strike No. 116
cancelled.
NOTE
 (5)
: XXX-XXX shows the last six digits of any Main Strut and Dressing part
number beginning with 201489. Old PN does not have Strike No. 116
cancelled. New PN has strike No. 116 cancelled.
F. TOOLING
(1) Tooling - Price and Availability
None
(2) Tools
NOTE
: To accomplish this Service Bulletin it is necessary to use the tools listed
in the subsequent re ferenced tasks:
- AMM Task 32-11-14-000-801
- AMM Task 32-11-14-400-801
- CMMv 32-11-74
- CMMv 32-11-96
- CMMv 32-11-97
- CMMv 32-12-03
- CMMv 32-12-05
- SAFRAN LANDING SYSTEMS UK Ltd Service Bulletin No.
A33/34-32-319
- SAFRAN LANDING SYSTEMS UK Ltd Service Bulletin No.
A33/34-32-320.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 17
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A340
SERVICE BULLETIN
(3) Special Tools
None
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 18
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A340
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 324316-831-895-001 - Modification by Replacement of the Bogie Pivot Pin in
accordance with VSB
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
WARNING
: MAKE SURE THAT THE SAFETY DEVICES AND THE WARNING NOTICES ARE
IN POSITION BEFORE YOU START A TASK ON OR NEAR:
- THE FLIGHT CONTROLS
- THE FLIGHT CONTROL SURFACES
- THE LANDING GEAR AND THE RELATED DOORS
- COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR INJURE PERSONS.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 19
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A340
SERVICE BULLETIN
NOTE
: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including RC paragraph contained herein,
contact AIRBUS for further instructions and approval.
NOTE
: Discarded parts must be managed at the operator’s discretion.
Task Associated Data
**CONF 001
Zone
731 741
Modified FIN
5010GM 5011GM 5018GM 5019GM
Manpower
TOTAL MANHOURS
 24.00
ELAPSED TIME (HOURS)
 7.25
Additional manhours related to Vendor SB; refer to:
SAFRAN LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319
**CONF 002
Zone
731 741
Modified FIN
5010GM 5011GM 5018GM 5019GM
Manpower
TOTAL MANHOURS
 24.00
ELAPSED TIME (HOURS)
 7.25
Additional manhours related to Vendor SB; refer to:
SAFRAN LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320
**CONF ALL
A. GENERAL
**CONF 001
(1) Subtask 324316-910-401-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
Task 20-21-11-911-801
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 20
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A340
SERVICE BULLETIN
References
Consumable Material List (CML)
Structural Repair Manual (SRM)
 51-24-00
51-42-00
51-43-00
(a) For the specification of Material Numbers (Mat. No.) given in this Service Bulletin,
refer to the Consumable Material List (CML).
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) Remove and install fasteners in accordance with SRM 51-42-00.
(d) Get alternative and substitute fastener data in accordance with SRM 51-43-00.
(e) Apply sealant in accordance with SRM 51-24-00.
(f) To torque tighten the standard threaded fasteners, refer to AMM Task
20-21-11-911-801.
(g) Tag all the parts you must remove and retain to make the subsequent installation
easier.
(h) Put all the retained hardware in identified plastic bags and attach the bags to the
related unit.
(2) Subtask 324316-839-401-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 002
(1) Subtask 324316-910-401-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
Task 20-21-11-911-801
Consumable Material List (CML)
Structural Repair Manual (SRM)
 51-24-00
51-42-00
51-43-00
(a) For the specification of Material Numbers (Mat. No.) given in this Service Bulletin,
refer to the Consumable Material List (CML).
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 21
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A340
SERVICE BULLETIN
(c) Remove and install fasteners in accordance with SRM 51-42-00.
(d) Get alternative and substitute fastener data in accordance with SRM 51-43-00.
(e) Apply sealant in accordance with SRM 51-24-00.
(f) To torque tighten the standard threaded fasteners, refer to AMM Task
20-21-11-911-801.
(g) Tag all the parts you must remove and retain to make the subsequent installation
easier.
(h) Put all the retained hardware in identified plastic bags and attach the bags to the
related unit.
(2) Subtask 324316-839-401-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF ALL
B. PREPARATION
**CONF 001
(1) Subtask 324316-941-401-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 07-11-00-581-803
Task 12-34-24-860-802
Task 32-00-00-481-801
Task 32-11-14-000-801
Component Maintenance Manual Vendor
(CMMv)
32-11-74
32-11-96
32-11-97
NOTE
: For the basic Aircraft configuration, refer to AMM Chapter ’Introduction -
Aircraft status for maintenance’ in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Install the safety devices on the landing gear, refer to AMM Task
32-00-00-481-801.
(c) Lift the aircraft on jacks, re fer to AMM Task 07-11-00-581-803.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 22
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29

@A340
SERVICE BULLETIN
(d) Do the job set-up procedure as specified in the removal of the MLG bogie beam
assembly, refer to AMM Task 32-11-14-000-801.
(e) Do the preparation before the replacement of the sliding piston pivot bushes, Item
(7), in accordance with CMMv 32-11-96 or CMMv 32-11-97.
(f) Do the preparation before the replacement of the bogie beam pivot bushes, Item
(6), in accordance with CMMv 32-11-74.
**CONF 002
(1) Subtask 324316-941-401-002 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 07-11-00-581-803
Task 12-34-24-860-802
Task 32-00-00-481-801
Task 32-11-14-000-801
Component Maintenance Manual Vendor
(CMMv)
32-12-03
32-12-05
NOTE
: For the basic Aircraft configuration, refer to AMM Chapter ’Introduction -
Aircraft status for maintenance’ in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Install the safety devices on the landing gear, refer to AMM Task
32-00-00-481-801.
(c) Lift the aircraft on jacks, re fer to AMM Task 07-11-00-581-803.
(d) Do the job set-up procedure as specified in the removal of the MLG bogie beam
assembly, refer to AMM Task 32-11-14-000-801.
(e) Do the preparation before the replacement of the sliding piston pivot bushes, Item
(7), in accordance with CMMv 32-12-03.
(f) Do the preparation before the replacement of the bogie beam pivot bushes, Item
(6), in accordance with CMMv 32-12-05.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 23
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 30

@A340
SERVICE BULLETIN
**CONF ALL
C. PROCEDURE
**CONF 001
(1) Subtask 324316-020-403-001 - Remove the Bogie Pivot Pin, LH side
Work Zones and Access Panels
Zone
 Access/Work location
731
Manpower Resources
Manhours
 2.00
Minimum number of person
 2
Subtask elapsed time
 1.00
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 32-11-14-000-801
Component Maintenance Manual Vendor
(CMMv)
32-11-74
32-11-96
32-11-97
Structural Repair Manual (SRM)
 51-42-00
Vendor Service Bulletin (VSB)
 SAFRAN LANDING SYSTEMS UK Ltd
A33/34-32-319
Fig. A-UBAAA
Modification of the Bogie Pivot Pin
Sheet 01
Sheet 02
WARNING
: USE GOGGLES WHEN YOU REMOVE OR INSTALL LOCKWIRE.
EACH TIME YOU CUT LOCKWIRE, REMOVE AND DISCARD IT
IMMEDIATELY. LOOSE LOCKWIRE CAN CAUSE INJURY AND/OR
DAMAGE.
NOTE
: For this procedure you will lift the aircraft on jacks until the aircraft weight
is off the bogie beam, so that the pivot pin can be turned.
(a) Remove the bogie pivot pin from the MLG, LH side.
Refer to Fig. A-UBAAA Sheet 02
 , view B and AMM Task 32-11-14-000-801.
Refer to SAFRAN LANDING SYSTEMS UK Ltd Service Bulletin No.
A33/34-32-319.
In accordance with CMMv 32-11-74 and CMMv 32-11-96 or CMMv 32-11-97.
In accordance with SRM 51-42-00.
1
 Cut and discard the lockwire from the bolts, Item (1).
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 24
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 31

@A340
SERVICE BULLETIN
2
 Remove:
FIN 5010GM
1 Bogie And Dressings 201486003-040 Item (9) Retain
or
FIN 5010GM
1 Bogie And Dressi ngs 201486 XXX-XXX Retain
or
FIN 5010GM
1 Bogie And Dressi ngs 201274 XXX-XXX Retain
NOTE
: Retained for modification.
attached with
3 Bolt Item (1) Discard
3 Washer-Flat Item (2) Discard
1 Collar 201042188 Item (3) Discard
1 Nut 201269613 Item (4) Discard
1 Pin 201254925 Item (5) Discard
4 Sliding Pivot-Bush 201487600 Item (7) Discard
or
4 Sliding Pivot-Bush 201487626 Item (7) Discard
2 Bogie Pivot-Bush 201485613 Item (6) Discard
(2) Subtask 324316-020-404-001 - Remove the Bogie Pivot Pin, RH side
Work Zones and Access Panels
Zone
 Access/Work location
741
Manpower Resources
Manhours
 2.00
Minimum number of person
 2
Subtask elapsed time
 1.00
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 32-11-14-000-801
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 25
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 32

@A340
SERVICE BULLETIN
References
Component Maintenance Manual Vendor
(CMMv)
32-11-74
32-11-96
32-11-97
Structural Repair Manual (SRM)
 51-42-00
Vendor Service Bulletin (VSB)
 SAFRAN LANDING SYSTEMS UK Ltd
A33/34-32-319
Fig. A-UBAAA
Modification of the Bogie Pivot Pin
Sheet 01
Sheet 02
WARNING
: USE GOGGLES WHEN YOU REMOVE OR INSTALL LOCKWIRE.
EACH TIME YOU CUT LOCKWIRE, REMOVE AND DISCARD IT
IMMEDIATELY. LOOSE LOCKWIRE CAN CAUSE INJURY AND/OR
DAMAGE.
NOTE
: For this procedure you will lift the aircraft on jacks until the aircraft weight
is off the bogie beam, so that the pivot pin can be turned.
(a) Remove the bogie pivot pin from the MLG, RH side.
Refer to Fig. A-UBAAA Sheet 02
 , view B and AMM Task 32-11-14-000-801.
Refer to SAFRAN LANDING SYSTEMS UK Ltd Service Bulletin No.
A33/34-32-319.
In accordance with CMMv 32-11-74 and CMMv 32-11-96 or CMMv 32-11-97.
In accordance with SRM 51-42-00.
1
 Cut and discard the lockwire from the bolts, Item (1).
2
 Remove:
FIN 5011GM
1 Bogie And Dressings 201486003-040 Item (9) Retain
or
FIN 5011GM
1 Bogie And Dressi ngs 201486 XXX-XXX Retain
or
FIN 5011GM
1 Bogie And Dressi ngs 201274 XXX-XXX Retain
NOTE
: Retained for modification.
attached with
3 Bolt Item (1) Discard
3 Washer-Flat Item (2) Discard
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 26
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 33

@A340
SERVICE BULLETIN
1 Collar 201042188 Item (3) Discard
1 Nut 201269613 Item (4) Discard
1 Pin 201254925 Item (5) Discard
4 Sliding Pivot-Bush 201487600 Item (7) Discard
or
4 Sliding Pivot-Bush 201487626 Item (7) Discard
2 Bogie Pivot-Bush 201485613 Item (6) Discard
(3) Subtask 324316-831-403-001 - Modify the MLG, LH side
Work Zones and Access Panels
Zone
 Access/Work location
731
References
Vendor Service Bulletin (VSB)
 SAFRAN LANDING SYSTEMS UK Ltd
A33/34-32-319
CAUTION
: COMPLETE REMOVAL OF THE OLD GREASE FROM THE BOGIE
PIVOT PINS, INTERFACING BU SHES AND GR EASE SUPPLY
DRILLINGS MUST BE DONE TO PREVENT CONTAMINATION OF
THE NEW GREASE. CONTAMINATION OF GREASE CAN CAUSE
DAMAGE TO THE COMPONENTS IN THIS ASSEMBLY. IT IS
NORMAL FOR GREASE TO ACCUMULATE IN THE BOGIE BEAM
BORE AROUND THE BOGIE PIVOT PIN. IT IS IMPORTANT
THAT THE ENVIRONMENTAL PROTECTION IN THIS AREA IS
NOT DAMAGED. IT IS NOT REQUIRED TO REMOVE ANY
GREASE DEPOSITED IN THE BOGIE BEAM BORE. INCORRECT
REMOVAL OF GREASE IN THIS AREA COULD DAMAGE THE
ENVIRONMENTAL PROTECTION OF THE BOGIE BEAM.
(a) Modify the MLG, LH side in accor dance with the SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No. A33/34-32-319.
NOTE
: Make sure the new grease comes through the lubrication fittings so
that all old grease is removed.
(4) Subtask 324316-831-404-001 - Modify the MLG, RH side
Work Zones and Access Panels
Zone
 Access/Work location
741
References
Vendor Service Bulletin (VSB)
 SAFRAN LANDING SYSTEMS UK Ltd
A33/34-32-319
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 27
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 34

@A340
SERVICE BULLETIN
CAUTION
: COMPLETE REMOVAL OF THE OLD GREASE FROM THE BOGIE
PIVOT PINS, INTERFACING BU SHES AND GR EASE SUPPLY
DRILLINGS MUST BE DONE TO PREVENT CONTAMINATION OF
THE NEW GREASE. CONTAMINATION OF GREASE CAN CAUSE
DAMAGE TO THE COMPONENTS IN THIS ASSEMBLY. IT IS
NORMAL FOR GREASE TO ACCUMULATE IN THE BOGIE BEAM
BORE AROUND THE BOGIE PIVOT PIN. IT IS IMPORTANT
THAT THE ENVIRONMENTAL PROTECTION IN THIS AREA IS
NOT DAMAGED. IT IS NOT REQUIRED TO REMOVE ANY
GREASE DEPOSITED IN THE BOGIE BEAM BORE. INCORRECT
REMOVAL OF GREASE IN THIS AREA COULD DAMAGE THE
ENVIRONMENTAL PROTECTION OF THE BOGIE BEAM.
(a) Modify the MLG, RH side in accor dance with the SAFRAN LANDING SYSTEMS
UK Ltd Service Bulletin No. A33/34-32-319.
NOTE
: Make sure the new grease comes through the lubrication fittings so
that all old grease is removed.
(5) Subtask 324316-640-403-001 - Preparation for Installation, LH side
Work Zones and Access Panels
Zone
 Access/Work location
731
Manpower Resources
Manhours
 1.00
Minimum number of person
 1
Subtask elapsed time
 1.00
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Mineral Oil Base Grease-
Anti-Seize Lithium Thicke
03FCC2
 As required
Synthetic Oil Base Grease-
General Purpose Lithium
03GBC1
 As required
 (1)
Non Aqueous Cleaner-
General
08BAA9
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
NOTE
 (1)
: Use MIL-PRF-23827 TYPE 1 grease.
References
Structural Repair Manual (SRM)
 51-24-00
Fig. A-UBAAA
Modification of the Bogie Pivot Pin
Sheet 01
Sheet 02
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 28
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 35

@A340
SERVICE BULLETIN
WARNING
: IF YOU USE AN ABRASIVE MATERIAL ON THE MAIN BEARINGS OF
THE SHOCK ABSORBER AND THE BOGIE BEAM, YOU MUST NOT
GET THE METAL DUST:
- O NY O U RS K I N
- IN YOUR EYES
- IN YOUR RESPIRATORY SYSTEM.
(a) Clean the following parts, refer to Fig. A-UBAAA Sheet 02
 ,v i e wB :
- Threaded parts of the bogie beam pivot pin, Item (5)
- Threaded parts of the nut, Item (4)
- Bogie pivot pin bush internal diameter and grease grooves.
with:
Textile-Lint Free
Cotton
14SBA1 As required
and
Non Aqueous
Cleaner-General
08BAA9 As required
NOTE
: The solvent must not be poured directly onto any part of the bogie
beam bore.
(b) Apply to the following parts:
Refer to Fig. A-UBAAA Sheet 02
 ,v i e wB .
In accordance with SRM 51-24-00.
- Threads and splines of the bogie pivot pin, Item (5)
- Threads of the nut, Item (4).
Mineral Oil Base
Grease-Anti-Seize
Lithium Thicke
03FCC2 As required
NOTE
: This consumable must be applied only after the installation of the
bogie pivot pin, Item (5), and before the installation of the nut, Item
(4).
(c) Do a visual inspection of the component interface and/or the adjacent area:
- If cracks and/or damage are found, contact AIRBUS and obey their instructions
- If no crack and/or damage is found, go to the next step.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 29
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 36

@A340
SERVICE BULLETIN
(d) Make sure that the parts retained from the removed component are clean and in
the correct condition.
(e) Lubricate the following parts:
- Parts of the pivot pin that are not threaded
- Attachment bores of the shock absorber
- Attachment bores of the bogie beam.
with:
Synthetic Oil Base
Grease-General
Purpose Lithium
03GBC1 As required
(6) Subtask 324316-640-404-001 - Preparation for Installation, RH side
Work Zones and Access Panels
Zone
 Access/Work location
741
Manpower Resources
Manhours
 1.00
Minimum number of person
 1
Subtask elapsed time
 1.00
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Mineral Oil Base Grease-
Anti-Seize Lithium Thicke
03FCC2
 As required
Synthetic Oil Base Grease-
General Purpose Lithium
03GBC1
 As required
 (1)
Non Aqueous Cleaner-
General
08BAA9
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
NOTE
 (1)
: Use MIL-PRF-23827 TYPE 1 grease.
References
Structural Repair Manual (SRM)
 51-24-00
Fig. A-UBAAA
Modification of the Bogie Pivot Pin
Sheet 01
Sheet 02
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 30
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 37

@A340
SERVICE BULLETIN
WARNING
: IF YOU USE AN ABRASIVE MATERIAL ON THE MAIN BEARINGS OF
THE SHOCK ABSORBER AND THE BOGIE BEAM, YOU MUST NOT
GET THE METAL DUST:
- O NY O U RS K I N
- IN YOUR EYES
- IN YOUR RESPIRATORY SYSTEM.
(a) Clean the following parts, refer to Fig. A-UBAAA Sheet 02
 ,v i e wB :
- Threaded parts of the bogie beam pivot pin, Item (5)
- Threaded parts of the nut, Item (4)
- Bogie pivot pin bush internal diameter and grease grooves.
with:
Textile-Lint Free
Cotton
14SBA1 As required
and
Non Aqueous
Cleaner-General
08BAA9 As required
NOTE
: The solvent must not be poured directly onto any part of the bogie
beam bore.
(b) Apply to the following parts:
Refer to Fig. A-UBAAA Sheet 02
 ,v i e wB .
In accordance with SRM 51-24-00.
- Threads and splines of the bogie pivot pin, Item (5)
- Threads of the nut, Item (4).
Mineral Oil Base
Grease-Anti-Seize
Lithium Thicke
03FCC2 As required
NOTE
: This consumable must be applied only after the installation of the
bogie pivot pin, Item (5), and before the installation of the nut, Item
(4).
(c) Do a visual inspection of the component interface and/or the adjacent area:
- If cracks and/or damage are found, contact AIRBUS and obey their instructions
- If no crack and/or damage is found, go to the next step.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 31
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 38

@A340
SERVICE BULLETIN
(d) Make sure that the parts retained from the removed component are clean and in
the correct condition.
(e) Lubricate the following parts:
- Parts of the pivot pin that are not threaded
- Attachment bores of the shock absorber
- Attachment bores of the bogie beam.
with:
Synthetic Oil Base
Grease-General
Purpose Lithium
03GBC1 As required
(7) Subtask 324316-420-401-001 - Install the Bogie Pivot Pin, LH side
Work Zones and Access Panels
Zone
 Access/Work location
731
Material necessary to do the job
Reidentified part set REIDB01
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
9
 201486003-045
 BOGIE
 (9)
 201486003-040
 (1)
201274XXX-XXX
 BOGIE
 201274XXX-XXX
 (2) (2)
201486XXX-XXX
 BOGIE
 201486XXX-XXX
 (3) (3)
NOTE
: For the re-identification of detail parts and sub-assemblies for the A/C on
which basic MLG is fitted as well as for CONF 001, refer to SAFRAN
LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
NOTE
 (1)
: Old PN does not have Strike No. 28 cancelled. New PN has strike No.
28 cancelled.
NOTE
 (2)
: XXX-XXX shows the last six digits of any Bogie and Dressings part
number beginning with 201274. Old PN does not have Strike No. 28
cancelled. New PN has strike No. 28 cancelled.
NOTE
 (3)
: XXX-XXX shows the last six digits of any Bogie and Dressings part
number beginning with 201486. Old PN does not have Strike No. 28
cancelled. New PN has strike No. 28 cancelled.
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Synthetic Oil Base Grease-
General Purpose Lithium
03GBC1
 As required
 (1)
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 32
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 39

@A340
SERVICE BULLETIN
NOTE
 (1)
: Use MIL-PRF-23827 TYPE 1 grease.
References
Aircraft Maintenance Manual (AMM)
 Task 32-11-14-400-801
Vendor Service Bulletin (VSB)
 SAFRAN LANDING SYSTEMS UK Ltd
A33/34-32-319
(a) Install the bogie beam pivot bush in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
(b) Install the sliding piston pivot bush in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
(c) Install the new instruction plates in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
(d) Install the bogie and dressings in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319 and AMM Task
32-11-14-400-801.
After installation:
FIN 5010GM
1 Bogie And Dressings 201486003-040 Item (9) Retained at
removal
becomes
FIN 5010GM
1 Bogie And Dressings 201486003-045 Item 9
or
FIN 5010GM
1 Bogie And Dressings 201486XXX-XXX Retained at
removal
becomes
FIN 5010GM
1 Bogie And Dre ssings 201486 XXX-XXX
with the strike number 28 cancelled.
or
FIN 5010GM
1 Bogie And Dressings 201274XXX-XXX Retained at
removal
becomes
FIN 5010GM
1 Bogie And Dre ssings 201274 XXX-XXX
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 33
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 40

@A340
SERVICE BULLETIN
with the strike number 28 cancelled.
NOTE
: Parts are re-identified in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
(e) Apply the grease to the bogie pivot pin, in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
Synthetic Oil Base
Grease-General
Purpose Lithium
03GBC1 As required
(f)
CAUTION
: THE HEAD OF THE BOGIE PIVOT PIN MUST BE INBOARD ON
INSTALLATION.
Install the bogie pivot pin, and its attaching parts in accordance with the SAFRAN
LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
(8) Subtask 324316-420-402-001 - Install the Bogie Pivot Pin, RH side
Work Zones and Access Panels
Zone
 Access/Work location
741
Material necessary to do the job
Reidentified part set REIDB01
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
9
 201486003-045
 BOGIE
 (9)
 201486003-040
 (1)
201274XXX-XXX
 BOGIE
 201274XXX-XXX
 (2) (2)
201486XXX-XXX
 BOGIE
 201486XXX-XXX
 (3) (3)
NOTE
: For the re-identification of detail parts and sub-assemblies for the A/C on
which basic MLG is fitted as well as for CONF 001, refer to SAFRAN
LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
NOTE
 (1)
: Old PN does not have Strike No. 28 cancelled. New PN has strike No.
28 cancelled.
NOTE
 (2)
: XXX-XXX shows the last six digits of any Bogie and Dressings part
number beginning with 201274. Old PN does not have Strike No. 28
cancelled. New PN has strike No. 28 cancelled.
NOTE
 (3)
: XXX-XXX shows the last six digits of any Bogie and Dressings part
number beginning with 201486. Old PN does not have Strike No. 28
cancelled. New PN has strike No. 28 cancelled.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 34
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 41

@A340
SERVICE BULLETIN
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Synthetic Oil Base Grease-
General Purpose Lithium
03GBC1
 As required
 (1)
NOTE
 (1)
: Use MIL-PRF-23827 TYPE 1 grease.
References
Aircraft Maintenance Manual (AMM)
 Task 32-11-14-400-801
Vendor Service Bulletin (VSB)
 SAFRAN LANDING SYSTEMS UK Ltd
A33/34-32-319
(a) Install the bogie beam pivot bush in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
(b) Install the sliding piston pivot bush in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
(c) Install the new instruction plates in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
(d) Install the bogie and dressings in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319 and AMM Task
32-11-14-400-801.
After installation:
FIN 5011GM
1 Bogie And Dressings 201486003-040 Item (9) Retained at
removal
becomes
FIN 5011GM
1 Bogie And Dressings 201486003-045 Item 9
or
FIN 5011GM
1 Bogie And Dressings 201486XXX-XXX Retained at
removal
becomes
FIN 5011GM
1 Bogie And Dre ssings 201486 XXX-XXX
with the strike number 28 cancelled.
or
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 35
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 42

@A340
SERVICE BULLETIN
FIN 5011GM
1 Bogie And Dressings 201274XXX-XXX Retained at
removal
becomes
FIN 5011GM
1 Bogie And Dre ssings 201274 XXX-XXX
with the strike number 28 cancelled.
NOTE
: Parts are re-identified in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
(e) Apply the grease to the bogie pivot pin, in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
Synthetic Oil Base
Grease-General
Purpose Lithium
03GBC1 As required
(f)
CAUTION
: THE HEAD OF THE BOGIE PIVOT PIN MUST BE INBOARD ON
INSTALLATION.
Install the bogie pivot pin, and its attaching parts in accordance with the SAFRAN
LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
(9) Subtask 324316-930-403-001 - Re-identify the MLG, LH side
Work Zones and Access Panels
Zone
 Access/Work location
731
Material necessary to do the job
Reidentified part set REIDB01
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
201254035-070
 STRUT
 201254035-065
 (1)
201254XXX-XXX
 STRUT
 201254XXX-XXX
 (2) (2)
NOTE
: For the re-identification of detail parts and sub-assemblies for the A/C on
which basic MLG is fitted as well as for CONF 001, refer to SAFRAN
LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
NOTE
 (1)
: Old PN does not have Strike No. 116 cancelled. New PN has strike No.
116 cancelled.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 36
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 43

@A340
SERVICE BULLETIN
NOTE
 (2)
: XXX-XXX shows the last six digits of any Main Strut and Dressing part
number beginning with 201254. Old PN does not have Strike No. 116
cancelled. New PN has strike No. 116 cancelled.
References
Vendor Service Bulletin (VSB)
 SAFRAN LANDING SYSTEMS UK Ltd
A33/34-32-319
(a) Re-identify the strut-main and dressing in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319:
FIN 5018GM
1 Strut-Main And
Dressings
201254035-065
becomes
FIN 5018GM
1 Strut-Main And
Dressings
201254035-070
or
FIN 5018GM
1 Strut-Main And
Dressings
201254XXX-XXX
becomes
FIN 5018GM
1 Strut-Main And
Dressings
201254XXX-XXX
with the strike number 116 cancelled.
NOTE
: Parts must be re-identified in accordance with SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
(10) Subtask 324316-930-404-001 - Re-identify the MLG, RH side
Work Zones and Access Panels
Zone
 Access/Work location
741
Material necessary to do the job
Reidentified part set REIDB01
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
201254036-070
 STRUT
 201254036-065
 (1)
201254XXX-XXX
 STRUT
 201254XXX-XXX
 (2) (2)
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 37
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 44

@A340
SERVICE BULLETIN
NOTE
: For the re-identification of detail parts and sub-assemblies for the A/C on
which basic MLG is fitted as well as for CONF 001, refer to SAFRAN
LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
NOTE
 (1)
: Old PN does not have Strike No. 116 cancelled. New PN has strike No.
116 cancelled.
NOTE
 (2)
: XXX-XXX shows the last six digits of any Main Strut and Dressing part
number beginning with 201254. Old PN does not have Strike No. 116
cancelled. New PN has strike No. 116 cancelled.
References
Vendor Service Bulletin (VSB)
 SAFRAN LANDING SYSTEMS UK Ltd
A33/34-32-319
(a) Re-identify the strut-main and dressing in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319:
FIN 5019GM
1 Strut-Main And
Dressings
201254036-065
becomes
FIN 5019GM
1 Strut-Main And
Dressings
201254036-070
or
FIN 5019GM
1 Strut-Main And
Dressings
201254XXX-XXX
becomes
FIN 5019GM
1 Strut-Main And
Dressings
201254XXX-XXX
with the strike number 116 cancelled.
NOTE
: Parts must be re-identified in accordance with SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-319.
**CONF 002
(1) Subtask 324316-020-403-002 - Remove the Bogie Pivot Pin, LH side
Work Zones and Access Panels
Zone
 Access/Work location
731
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 38
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 45

@A340
SERVICE BULLETIN
Manpower Resources
Manhours
 2.00
Minimum number of person
 2
Subtask elapsed time
 1.00
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 32-11-14-000-801
Component Maintenance Manual Vendor
(CMMv)
32-12-03
32-12-05
Structural Repair Manual (SRM)
 51-42-00
Vendor Service Bulletin (VSB)
 SAFRAN LANDING SYSTEMS UK Ltd
A33/34-32-320
Fig. A-UBAAA
Modification of the Bogie Pivot Pin
Sheet 01
Sheet 02
WARNING
: USE GOGGLES WHEN YOU REMOVE OR INSTALL LOCKWIRE.
EACH TIME YOU CUT LOCKWIRE, REMOVE AND DISCARD IT
IMMEDIATELY. LOOSE LOCKWIRE CAN CAUSE INJURY AND/OR
DAMAGE.
NOTE
: For this procedure you will lift the aircraft on jacks until the aircraft weight
is off the bogie beam, so that the pivot pin can be turned.
(a) Remove the bogie pivot pin from the MLG, LH side.
Refer to Fig. A-UBAAA Sheet 02
 , view B and AMM Task 32-11-14-000-801.
Refer to SAFRAN LANDING SYSTEMS UK Ltd Service Bulletin No.
A33/34-32-320.
In accordance with CMMv 32-12-05 and CMMv 32-12-03.
In accordance with SRM 51-42-00.
1
 Cut and discard the lockwire from the bolts, Item (1).
2
 Remove:
FIN 5010GM
1 Bogie And Dressings 201486003-040 Item (9) Retain
or
FIN 5010GM
1 Bogie And Dressi ngs 201486 XXX-XXX Retain
or
FIN 5010GM
1 Bogie And Dressi ngs 201274 XXX-XXX Retain
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 39
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 46

@A340
SERVICE BULLETIN
NOTE
: Retained for modification.
attached with
3 Bolt Item (1) Discard
3 Washer-Flat Item (2) Discard
1 Collar 201042663 Item (3) Discard
1 Nut 201489622 Item (4) Discard
1 Pin 201489751 Item (5) Discard
4 Sliding Pivot-Bush 201487600 Item (7) Discard
or
4 Sliding Pivot-Bush 201487626 Item (7) Discard
2 Bogie Pivot-Bush 201485613 Item (6) Discard
(2) Subtask 324316-020-404-002 - Remove the Bogie Pivot Pin, RH side
Work Zones and Access Panels
Zone
 Access/Work location
741
Manpower Resources
Manhours
 2.00
Minimum number of person
 2
Subtask elapsed time
 1.00
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 32-11-14-000-801
Component Maintenance Manual Vendor
(CMMv)
32-12-03
32-12-05
Structural Repair Manual (SRM)
 51-42-00
Vendor Service Bulletin (VSB)
 SAFRAN LANDING SYSTEMS UK Ltd
A33/34-32-320
Fig. A-UBAAA
Modification of the Bogie Pivot Pin
Sheet 01
Sheet 02
WARNING
: USE GOGGLES WHEN YOU REMOVE OR INSTALL LOCKWIRE.
EACH TIME YOU CUT LOCKWIRE, REMOVE AND DISCARD IT
IMMEDIATELY. LOOSE LOCKWIRE CAN CAUSE INJURY AND/OR
DAMAGE.
NOTE
: For this procedure you will lift the aircraft on jacks until the aircraft weight
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 40
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 47

@A340
SERVICE BULLETIN
is off the bogie beam, so that the pivot pin can be turned.
(a) Remove the bogie pivot pin from the MLG, RH side.
Refer to Fig. A-UBAAA Sheet 02
 , view B and AMM Task 32-11-14-000-801.
Refer to SAFRAN LANDING SYSTEMS UK Ltd Service Bulletin No.
A33/34-32-320.
In accordance with CMMv 32-12-05 and CMMv 32-12-03.
In accordance with SRM 51-42-00.
1
 Cut and discard the lockwire from the bolts, Item (1).
2
 Remove:
FIN 5011GM
1 Bogie And Dressings 201486003-040 Item (9) Retain
or
FIN 5011GM
1 Bogie And Dressi ngs 201486 XXX-XXX Retain
or
FIN 5011GM
1 Bogie And Dressi ngs 201274 XXX-XXX Retain
NOTE
: Retained for modification.
attached with
3 Bolt Item (1) Discard
3 Washer-Flat Item (2) Discard
1 Collar 201042663 Item (3) Discard
1 Nut 201489622 Item (4) Discard
1 Pin 201489751 Item (5) Discard
4 Sliding Pivot-Bush 201487600 Item (7) Discard
or
4 Sliding Pivot-Bush 201487626 Item (7) Discard
2 Bogie Pivot-Bush 201485613 Item (6) Discard
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 41
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 48

@A340
SERVICE BULLETIN
(3) Subtask 324316-831-403-002 - Modify the MLG, LH side
Work Zones and Access Panels
Zone
 Access/Work location
731
References
Vendor Service Bulletin (VSB)
 SAFRAN LANDING SYSTEMS UK Ltd
A33/34-32-320
CAUTION
: COMPLETE REMOVAL OF THE OLD GREASE FROM THE BOGIE
PIVOT PINS, INTERFACING BU SHES AND GR EASE SUPPLY
DRILLINGS MUST BE DONE TO PREVENT CONTAMINATION OF
THE NEW GREASE. CONTAMINATION OF GREASE CAN CAUSE
DAMAGE TO THE COMPONENTS IN THIS ASSEMBLY. IT IS
NORMAL FOR GREASE TO ACCUMULATE IN THE BOGIE BEAM
BORE AROUND THE BOGIE PIVOT PIN. IT IS IMPORTANT
THAT THE ENVIRONMENTAL PROTECTION IN THIS AREA IS
NOT DAMAGED. IT IS NOT REQUIRED TO REMOVE ANY
GREASE DEPOSITED IN THE BOGIE BEAM BORE. INCORRECT
REMOVAL OF GREASE IN THIS AREA COULD DAMAGE THE
ENVIRONMENTAL PROTECTION OF THE BOGIE BEAM.
(a) Modify the MLG, LH side in accor dance with the SAFRAN LANDING SYSTEMS UK
Ltd Service Bulletin No. A33/34-32-320.
NOTE
: Make sure the new grease comes through the lubrication fittings so
that all old grease is removed.
(4) Subtask 324316-831-404-002 - Modify the MLG, RH side
Work Zones and Access Panels
Zone
 Access/Work location
741
References
Vendor Service Bulletin (VSB)
 SAFRAN LANDING SYSTEMS UK Ltd
A33/34-32-320
CAUTION
: COMPLETE REMOVAL OF THE OLD GREASE FROM THE BOGIE
PIVOT PINS, INTERFACING BU SHES AND GR EASE SUPPLY
DRILLINGS MUST BE DONE TO PREVENT CONTAMINATION OF
THE NEW GREASE. CONTAMINATION OF GREASE CAN CAUSE
DAMAGE TO THE COMPONENTS IN THIS ASSEMBLY. IT IS
NORMAL FOR GREASE TO ACCUMULATE IN THE BOGIE BEAM
BORE AROUND THE BOGIE PIVOT PIN. IT IS IMPORTANT
THAT THE ENVIRONMENTAL PROTECTION IN THIS AREA IS
NOT DAMAGED. IT IS NOT REQUIRED TO REMOVE ANY
GREASE DEPOSITED IN THE BOGIE BEAM BORE. INCORRECT
REMOVAL OF GREASE IN THIS AREA COULD DAMAGE THE
ENVIRONMENTAL PROTECTION OF THE BOGIE BEAM.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 42
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 49

@A340
SERVICE BULLETIN
(a) Modify the MLG, RH side in accor dance with the SAFRAN LANDING SYSTEMS
UK Ltd Service Bulletin No. A33/34-32-320.
NOTE
: Make sure the new grease comes through the lubrication fittings so
that all old grease is removed.
(5) Subtask 324316-640-403-001 - Preparation for Installation, LH side
Work Zones and Access Panels
Zone
 Access/Work location
731
Manpower Resources
Manhours
 1.00
Minimum number of person
 1
Subtask elapsed time
 1.00
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Mineral Oil Base Grease-
Anti-Seize Lithium Thicke
03FCC2
 As required
Synthetic Oil Base Grease-
General Purpose Lithium
03GBC1
 As required
 (1)
Non Aqueous Cleaner-
General
08BAA9
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
NOTE
 (1)
: Use MIL-PRF-23827 TYPE 1 grease.
References
Structural Repair Manual (SRM)
 51-24-00
Fig. A-UBAAA
Modification of the Bogie Pivot Pin
Sheet 01
Sheet 02
WARNING
: IF YOU USE AN ABRASIVE MATERIAL ON THE MAIN BEARINGS OF
THE SHOCK ABSORBER AND THE BOGIE BEAM, YOU MUST NOT
GET THE METAL DUST:
- O NY O U RS K I N
- IN YOUR EYES
- IN YOUR RESPIRATORY SYSTEM.
(a) Clean the following parts, refer to Fig. A-UBAAA Sheet 02
 ,v i e wB :
- Threaded parts of the bogie beam pivot pin, Item (5)
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 43
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 50

@A340
SERVICE BULLETIN
- Threaded parts of the nut, Item (4)
- Bogie pivot pin bush internal diameter and grease grooves.
with:
Textile-Lint Free
Cotton
14SBA1 As required
and
Non Aqueous
Cleaner-General
08BAA9 As required
NOTE
: The solvent must not be poured directly onto any part of the bogie
beam bore.
(b) Apply to the following parts:
Refer to Fig. A-UBAAA Sheet 02
 ,v i e wB .
In accordance with SRM 51-24-00.
- Threads and splines of the bogie pivot pin, Item (5)
- Threads of the nut, Item (4).
Mineral Oil Base
Grease-Anti-Seize
Lithium Thicke
03FCC2 As required
NOTE
: This consumable must be applied only after the installation of the
bogie pivot pin, Item (5), and before the installation of the nut, Item
(4).
(c) Do a visual inspection of the component interface and/or the adjacent area:
- If cracks and/or damage are found, contact AIRBUS and obey their instructions
- If no crack and/or damage is found, go to the next step.
(d) Make sure that the parts retained from the removed component are clean and in
the correct condition.
(e) Lubricate the following parts:
- Parts of the pivot pin that are not threaded
- Attachment bores of the shock absorber
- Attachment bores of the bogie beam.
with:
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 44
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 51

@A340
SERVICE BULLETIN
Synthetic Oil Base
Grease-General
Purpose Lithium
03GBC1 As required
(6) Subtask 324316-640-404-001 - Preparation for Installation, RH side
Work Zones and Access Panels
Zone
 Access/Work location
741
Manpower Resources
Manhours
 1.00
Minimum number of person
 1
Subtask elapsed time
 1.00
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Mineral Oil Base Grease-
Anti-Seize Lithium Thicke
03FCC2
 As required
Synthetic Oil Base Grease-
General Purpose Lithium
03GBC1
 As required
 (1)
Non Aqueous Cleaner-
General
08BAA9
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
NOTE
 (1)
: Use MIL-PRF-23827 TYPE 1 grease.
References
Structural Repair Manual (SRM)
 51-24-00
Fig. A-UBAAA
Modification of the Bogie Pivot Pin
Sheet 01
Sheet 02
WARNING
: IF YOU USE AN ABRASIVE MATERIAL ON THE MAIN BEARINGS OF
THE SHOCK ABSORBER AND THE BOGIE BEAM, YOU MUST NOT
GET THE METAL DUST:
- O NY O U RS K I N
- IN YOUR EYES
- IN YOUR RESPIRATORY SYSTEM.
(a) Clean the following parts, refer to Fig. A-UBAAA Sheet 02
 ,v i e wB :
- Threaded parts of the bogie beam pivot pin, Item (5)
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 45
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 52

@A340
SERVICE BULLETIN
- Threaded parts of the nut, Item (4)
- Bogie pivot pin bush internal diameter and grease grooves.
with:
Textile-Lint Free
Cotton
14SBA1 As required
and
Non Aqueous
Cleaner-General
08BAA9 As required
NOTE
: The solvent must not be poured directly onto any part of the bogie
beam bore.
(b) Apply to the following parts:
Refer to Fig. A-UBAAA Sheet 02
 ,v i e wB .
In accordance with SRM 51-24-00.
- Threads and splines of the bogie pivot pin, Item (5)
- Threads of the nut, Item (4).
Mineral Oil Base
Grease-Anti-Seize
Lithium Thicke
03FCC2 As required
NOTE
: This consumable must be applied only after the installation of the
bogie pivot pin, Item (5), and before the installation of the nut, Item
(4).
(c) Do a visual inspection of the component interface and/or the adjacent area:
- If cracks and/or damage are found, contact AIRBUS and obey their instructions
- If no crack and/or damage is found, go to the next step.
(d) Make sure that the parts retained from the removed component are clean and in
the correct condition.
(e) Lubricate the following parts:
- Parts of the pivot pin that are not threaded
- Attachment bores of the shock absorber
- Attachment bores of the bogie beam.
with:
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 46
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 53

@A340
SERVICE BULLETIN
Synthetic Oil Base
Grease-General
Purpose Lithium
03GBC1 As required
(7) Subtask 324316-420-401-002 - Install the Bogie Pivot Pin, LH side
Work Zones and Access Panels
Zone
 Access/Work location
731
Material necessary to do the job
Reidentified part set REIDB02
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
9
 201486003-045
 BOGIE
 (9)
 201486003-040
 (1)
201274XXX-XXX
 BOGIE
 201274XXX-XXX
 (2) (2)
201486XXX-XXX
 BOGIE
 201486XXX-XXX
 (3) (3)
NOTE
: For the re-identification of detail parts and sub-assemblies for the A/C on
which growth MLG is fitted as well as for CONF 002, refer to SAFRAN
LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
NOTE
 (1)
: Old PN does not have Strike No. 28 cancelled. New PN has strike No.
28 cancelled.
NOTE
 (2)
: XXX-XXX shows the last six digits of any Bogie and Dressings part
number beginning with 201274. Old PN does not have Strike No. 28
cancelled. New PN has strike No. 28 cancelled.
NOTE
 (3)
: XXX-XXX shows the last six digits of any Bogie and Dressings part
number beginning with 201486. Old PN does not have Strike No. 28
cancelled. New PN has strike No. 28 cancelled.
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Synthetic Oil Base Grease-
General Purpose Lithium
03GBC1
 As required
 (1)
NOTE
 (1)
: Use MIL-PRF-23827 TYPE 1 grease.
References
Aircraft Maintenance Manual (AMM)
 Task 32-11-14-400-801
Vendor Service Bulletin (VSB)
 SAFRAN LANDING SYSTEMS UK Ltd
A33/34-32-320
(a) Install the bogie beam pivot bush in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 47
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 54

@A340
SERVICE BULLETIN
(b) Install the sliding piston pivot bush in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
(c) Install the new instruction plates in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
(d) Install the bogie and dressings in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320 and AMM Task
32-11-14-400-801.
After installation:
FIN 5010GM
1 Bogie And Dressings 201486003-040 Item (9) Retained at
removal
becomes
FIN 5010GM
1 Bogie And Dressings 201486003-045 Item 9
or
FIN 5010GM
1 Bogie And Dressings 201486XXX-XXX Retained at
removal
becomes
FIN 5010GM
1 Bogie And Dre ssings 201486 XXX-XXX
with the strike number 28 cancelled.
or
FIN 5010GM
1 Bogie And Dressings 201274XXX-XXX Retained at
removal
becomes
FIN 5010GM
1 Bogie And Dre ssings 201274 XXX-XXX
with the strike number 28 cancelled.
NOTE
: Parts are re-identified in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 48
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 55

@A340
SERVICE BULLETIN
(e) Apply the grease to the bogie pivot pin, in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
Synthetic Oil Base
Grease-General
Purpose Lithium
03GBC1 As required
(f)
CAUTION
: THE HEAD OF THE BOGIE PIVOT PIN MUST BE INBOARD ON
INSTALLATION.
Install the bogie pivot pin, and its attaching parts in accordance with the SAFRAN
LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
(8) Subtask 324316-420-402-002 - Install the Bogie Pivot Pin, RH side
Work Zones and Access Panels
Zone
 Access/Work location
741
Material necessary to do the job
Reidentified part set REIDB02
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
9
 201486003-045
 BOGIE
 (9)
 201486003-040
 (1)
201274XXX-XXX
 BOGIE
 201274XXX-XXX
 (2) (2)
201486XXX-XXX
 BOGIE
 201486XXX-XXX
 (3) (3)
NOTE
: For the re-identification of detail parts and sub-assemblies for the A/C on
which growth MLG is fitted as well as for CONF 002, refer to SAFRAN
LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
NOTE
 (1)
: Old PN does not have Strike No. 28 cancelled. New PN has strike No.
28 cancelled.
NOTE
 (2)
: XXX-XXX shows the last six digits of any Bogie and Dressings part
number beginning with 201274. Old PN does not have Strike No. 28
cancelled. New PN has strike No. 28 cancelled.
NOTE
 (3)
: XXX-XXX shows the last six digits of any Bogie and Dressings part
number beginning with 201486. Old PN does not have Strike No. 28
cancelled. New PN has strike No. 28 cancelled.
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Synthetic Oil Base Grease-
General Purpose Lithium
03GBC1
 As required
 (1)
NOTE
 (1)
: Use MIL-PRF-23827 TYPE 1 grease.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 49
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 56

@A340
SERVICE BULLETIN
References
Aircraft Maintenance Manual (AMM)
 Task 32-11-14-400-801
Vendor Service Bulletin (VSB)
 SAFRAN LANDING SYSTEMS UK Ltd
A33/34-32-320
(a) Install the bogie beam pivot bush in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
(b) Install the sliding piston pivot bush in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
(c) Install the new instruction plates in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
(d) Install the bogie and dressings in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320 and AMM Task
32-11-14-400-801.
After installation:
FIN 5011GM
1 Bogie And Dressings 201486003-040 Item (9) Retained at
removal
becomes
FIN 5011GM
1 Bogie And Dressings 201486003-045 Item 9
or
FIN 5011GM
1 Bogie And Dressings 201486XXX-XXX Retained at
removal
becomes
FIN 5011GM
1 Bogie And Dre ssings 201486 XXX-XXX
with the strike number 28 cancelled.
or
FIN 5011GM
1 Bogie And Dressings 201274XXX-XXX Retained at
removal
becomes
FIN 5011GM
1 Bogie And Dre ssings 201274 XXX-XXX
with the strike number 28 cancelled.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 50
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 57

@A340
SERVICE BULLETIN
NOTE
: Parts are re-identified in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
(e) Apply the grease to the bogie pivot pin, in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
Synthetic Oil Base
Grease-General
Purpose Lithium
03GBC1 As required
(f)
CAUTION
: THE HEAD OF THE BOGIE PIVOT PIN MUST BE INBOARD ON
INSTALLATION.
Install the bogie pivot pin, and its attaching parts in accordance with the SAFRAN
LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
(9) Subtask 324316-930-403-002 - Re-identify the MLG, LH side
Work Zones and Access Panels
Zone
 Access/Work location
731
Material necessary to do the job
Reidentified part set REIDB02
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
201489001-200
 STRUT
 201489001-195
 (1)
201489XXX-XXX
 STRUT
 201489XXX-XXX
 (2) (2)
NOTE
: For the re-identification of detail parts and sub-assemblies for the A/C on
which growth MLG is fitted as well as for CONF 002, refer to SAFRAN
LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
NOTE
 (1)
: Old PN does not have Strike No. 116 cancelled. New PN has strike No.
116 cancelled.
NOTE
 (2)
: XXX-XXX shows the last six digits of any Main Strut and Dressing part
number beginning with 201489. Old PN does not have Strike No. 116
cancelled. New PN has strike No. 116 cancelled.
References
Vendor Service Bulletin (VSB)
 SAFRAN LANDING SYSTEMS UK Ltd
A33/34-32-320
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 51
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 58

@A340
SERVICE BULLETIN
(a) Re-identify the strut-main and dressing in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320:
FIN 5018GM
1 Strut-Main And
Dressings
201489001-195
becomes
FIN 5018GM
1 Strut-Main And
Dressings
201489001-200
or
FIN 5018GM
1 Strut-Main And
Dressings
201489XXX-XXX
becomes
FIN 5018GM
1 Strut-Main And
Dressings
201489XXX-XXX
with the strike number 116 cancelled.
NOTE
: Parts must be re-identified in accordance with SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
(10) Subtask 324316-930-404-002 - Re-identify the MLG, RH side
Work Zones and Access Panels
Zone
 Access/Work location
741
Material necessary to do the job
Reidentified part set REIDB02
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
201489002-200
 STRUT
 201489002-195
 (1)
201489XXX-XXX
 STRUT
 201489XXX-XXX
 (2) (2)
NOTE
: For the re-identification of detail parts and sub-assemblies for the A/C on
which growth MLG is fitted as well as for CONF 002, refer to SAFRAN
LANDING SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
NOTE
 (1)
: Old PN does not have Strike No. 116 cancelled. New PN has strike No.
116 cancelled.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 52
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 59

@A340
SERVICE BULLETIN
NOTE
 (2)
: XXX-XXX shows the last six digits of any Main Strut and Dressing part
number beginning with 201489. Old PN does not have Strike No. 116
cancelled. New PN has strike No. 116 cancelled.
References
Vendor Service Bulletin (VSB)
 SAFRAN LANDING SYSTEMS UK Ltd
A33/34-32-320
(a) Re-identify the strut-main and dressing in accordance with the SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320:
FIN 5019GM
1 Strut-Main And
Dressings
201489002-195
becomes
FIN 5019GM
1 Strut-Main And
Dressings
201489002-200
or
FIN 5019GM
1 Strut-Main And
Dressings
201489XXX-XXX
becomes
FIN 5019GM
1 Strut-Main And
Dressings
201489XXX-XXX
with the strike number 116 cancelled.
NOTE
: Parts must be re-identified in accordance with SAFRAN LANDING
SYSTEMS UK Ltd Service Bulletin No. A33/34-32-320.
**CONF ALL
D. TEST
**CONF 001
(1) Subtask 324316-700-401-001 - Test
Manpower Resources
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 32-11-14-400-801
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 53
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 60

@A340
SERVICE BULLETIN
(a) Do the dimensional check of the proximity sensor after the installation of the MLG
bogie beam assembly, refer to AMM Task 32-11-14-400-801.
(b) Do the test as specified after the installation of the MLG bogie beam assembly,
refer to AMM Task 32-11-14-400-801.
**CONF 002
(1) Subtask 324316-700-401-001 - Test
Manpower Resources
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 32-11-14-400-801
(a) Do the dimensional check of the proximity sensor after the installation of the MLG
bogie beam assembly, refer to AMM Task 32-11-14-400-801.
(b) Do the test as specified after the installation of the MLG bogie beam assembly,
refer to AMM Task 32-11-14-400-801.
**CONF ALL
E. CLOSE-UP
**CONF 001
(1) Subtask 324316-942-401-001 - Close-up
Manpower Resources
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 07-11-00-586-803
Task 32-00-00-081-801
Task 32-00-00-081-802
(a) Remove the safety devices from the landing gear doors, refer to AMM Task
32-00-00-081-802.
(b) Remove the safety devices from the landing gear, refer to AMM Task
32-00-00-081-801.
(c) Lower the aircraft off the ja cks, refer to AMM Ta sk 07-11-00-586-803.
(d) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(e) Put the aircraft back to its initial configuration.
DATE: Sep 28/18 SERVICE BULLETIN No.: A340-32-4316
REVISION No.: 00 - Sep 28/18 Page: 54
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

The text continues at https://openairdocs.org/service-documents/airbus/a340-32-4316/file/fa799d5dab77.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
