# Airbus Service Bulletin A340-34-5105

Copy: No revision named ("FAA-2015-4810_A340-34-5105 R00"), 28 pages: PDF https://openairdocs.org/files/sha256/42/3b/423b057aa8857f0088767459a5c7f934e17dbf844b8b13a2cafc1027606e2c2e; text https://openairdocs.org/service-documents/airbus/a340-34-5105/file/423b057aa885.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2015-4810; AD 2016-07-30 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A340-34-5105
- Page: https://openairdocs.org/service-documents/airbus/a340-34-5105

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2016-12-15](https://openairdocs.org/ad/2016-12-15.md), effective Jul 6, 2016: No revision named
- [AD 2016-07-30](https://openairdocs.org/ad/2016-07-30.md), effective May 18, 2016: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a340-34-5105/proposed.md).

## Text (28 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2015-4810; AD 2016-07-30 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A340-500/600
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 34
TITLE: NAVIGATION - AOA - INSTALL AOA PROBES IN MIXED
CONFIGURATION - THALES FOR CAPT AND FIRST OFFICER AND
UTAS ON STANDBY
**CONF ALL
MODIFICATIONS
MODIFICATION CLASSIFICATION
MAJOR
 None
MINOR
 204937S33428
NOTE
: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting the
airworthiness of the product. All other changes are major changes.
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
The aim of this modification is to allow the airlines to fly in a mixed Angle of Attack (AOA) configuration.
This Service Bulletin requires the replacement of two UTAS AoA probes (FINs 3FP1 and 3FP2) PN
0861ED (installed by Mod. No. 46921S14694) or PN 0861ED2 (installed by Mod. No. 204294S33100 or
Service Bulletin No. A340-34-5102) by two THALES AoA probes PN C16291AB.
The accomplishment of this Service Bulletin will allow the airlines to fly in mixed AoA configurations.
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 LROPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 NO
NOTE
 (1)
: Service Bulletin must be accomplished.
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A340-500/600
SERVICE BULLETIN
SUMMARY
MATERIAL PRICE INFORMATION
**CONF 001
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Equipment BFEA01
 1
 See SB
 AOA Probes
**CONF 002
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Equipment BFEA02
 1
 See SB
 AOA Probes
EFFECTIVITY
**CONF ALL
This Service Bulletin is applicable to this (these) operator(s) :
16R 25R 31V 32P 81Q AIB CES HFM I2L MHK THA VIR
CONCURRENT REQUIREMENTS
**CONF 001
None
**CONF 002
None
REFERENCES / REPERCUSSIONS
**CONF ALL
TFU
 None
OEB
 None
AOT
 None
SIL
 None
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 Operator Information Transmission (OIT) No. 999.0017/15
NATURE OF THE WORK
AIRCRAFT
 NO
EQUIPMENT
 YES
HARD
 NO
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A340-500/600
SERVICE BULLETIN
SUMMARY
SOFT
 NO
OBRM
 NO
MANPOWER
**CONF 001
Task 345105-831-801-001: Modification by Replacement of the two AOA Probes (FINs 3FP1
and 3FP2) on Aircraft
TOTAL MANHOURS
 4.50
ELAPSED TIME (HOURS)
 3.50
**CONF 002
Task 345105-831-801-001: Modification by Replacement of the two AOA Probes (FINs 3FP1
and 3FP2) on Aircraft
TOTAL MANHOURS
 4.50
ELAPSED TIME (HOURS)
 3.50
APPENDICES
**CONF ALL
Appendix 01 - Elapsed Time Assumptions
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A340-500/600
SERVICE BULLETIN
SUMMARY
**CONF ALL
FR1
FR20
Z120
A
FR19
FR18
A
3FP2
3FP1
A
TYPICAL INSTALLATION
F_SB_345105_5_SAAA_01_00
Figure A-FSAAA - Sheet 01
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A340-500/600
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 34
TITLE: NAVIGATION - AOA - INSTALL AOA PROBES IN MIXED
CONFIGURATION - THALES FOR CAPT AND FIRST OFFICER AND
UTAS ON STANDBY
MODIFICATION No.: 204937S33428
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
NOTE
: This modification is applicable by Service Bulletin only.
NOTE
: This Service Bulletin is only applicable to aircraft equipped with UTAS AOA
PN 0861ED or PN 0861ED2.
NOTE
: This Service Bulletin is only applicable to aircraft on which Mod. No.
46921S14694 (INSTALL ANGLE OF ATTACK SENSORS ROSEMOUNT) is
embodied.
(1) Models
340-541 340-642
(2) Effectivity by MSN
0371 0376 0383 0391 0416 0436 0449 0453 0468 0475 0478 0488 0492 0499 0514
0560 0563 0575 0577 0586 0615 0622 0624 0628 0639 0677 0681 0689 0698 0706
0710 0719 0723 0736 0753 0764-0765 0768 0775 0787 0804 0924 0953
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A340-500/600
SERVICE BULLETIN
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
16R
 0615 0622
25R
 0924
31V
 0436
32P
 0560
81Q
 0563
AIB
 0478 0492 0499
CES
 0468 0488 0514 0577 0586
HFM
 0391
I2L
 0453 0475
MHK
 0371 0376 0383 0416 0449
THA
 0624 0628 0677 0681 0689 0698 0710 0719 0775 0953
VIR
 0575 0639 0706 0723 0736 0753 0764 0765 0768 0787 0804
(4) Configuration by MSN
MSN
 CONFIGURATION
0371 0376 0383 0391 0416 0436 0449 0453 0468 0475 0478
0488 0492 0499 0514 0560 0563 0575 0577 0586 0615 0622
0624 0628 0639 0677 0681 0689 0698 0706 0710 0719 0723
0736 0753 0764 0765 0768 0775 0787 0804 0924 0953
001 002
(5) Configuration definition
**CONF 001
Config. 001 is valid for aircraft on which Mod. No. 204294S33100 (Service Bulletin No.
A340-34-5102) is not embodied.
**CONF 002
Config. 002 is valid for aircraft on which Mod. No. 204294S33100 (Service Bulletin No.
A340-34-5102) is embodied.
(6) Material Effectivity
**CONF 001
MATERIAL
 QTY PER A/C
 SEE NOTES
Equipment BFEA01
 1
**CONF 002
MATERIAL
 QTY PER A/C
 SEE NOTES
Equipment BFEA02
 1
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A340-500/600
SERVICE BULLETIN
**CONF ALL
B. CONCURRENT REQUIREMENTS
**CONF 001
None
**CONF 002
None
**CONF ALL
C. REASON
(1) History
The aim of this modification is to allow the airlines to fly in a mixed Angle of Attack
(AOA) configuration.
(2) Objective/Action
This Service Bulletin requires the replacement of two UTAS AoA probes (FINs 3FP1 and
3FP2) PN 0861ED (installed by Mod. No. 46921S14694) or PN 0861ED2 (installed by
Mod. No. 204294S33100 or Service Bulletin No. A340-34-5102) by two THALES AoA
probes PN C16291AB.
(3) Advantages
The accomplishment of this Service Bulletin will allow the airlines to fly in mixed AoA
configurations.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
**CONF 001
Task 345105-831-801-001: Modification by Replacement of the two AOA Probes (FINs 3FP1
and 3FP2) on Aircraft
(1) Replace the AOA Probe 1 (FIN 3FP1)
(2) Replace the AOA Probe 2 (FIN 3FP2)
**CONF 002
Task 345105-831-801-001: Modification by Replacement of the two AOA Probes (FINs 3FP1
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A340-500/600
SERVICE BULLETIN
and 3FP2) on Aircraft
(1) Replace the AOA Probe 1 (FIN 3FP1)
(2) Replace the AOA Probe 2 (FIN 3FP2)
**CONF ALL
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA) will be issued
to confirm this classification. It is anticipated that this Service Bulletin must be done
before Mar 31/17, the AD will confirm it but reference should be made to the AD for
confirmation of the mandated accomplishment timescale.
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organization Approval No. EASA.21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
**CONF 001
Task 345105-831-801-001: Modification by Replacement of the two AOA Probes (FINs 3FP1
and 3FP2) on Aircraft
Get Access
 1.00
On Aircraft
Replace the AOA Probe 1 (FIN 3FP1)
 1.00
Replace the AOA Probe 2 (FIN 3FP2)
 1.00
Tests
 0.50
Close-Up
 1.00
TOTAL MANHOURS
 4.50
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A340-500/600
SERVICE BULLETIN
Task 345105-831-801-001: Modification by Replacement of the two AOA Probes (FINs 3FP1
and 3FP2) on Aircraft
ELAPSED TIME (HOURS)
 3.50
NOTE
: For an explanation of the manhours and elapsed time, refer to the Gantt
Chart, Fig. A-FAAAA
 given in Appendix 01 - Elapsed Time Assumptions .
**CONF 002
Task 345105-831-801-001: Modification by Replacement of the two AOA Probes (FINs 3FP1
and 3FP2) on Aircraft
Get Access
 1.00
On Aircraft
Replace the AOA Probe 1 (FIN 3FP1)
 1.00
Replace the AOA Probe 2 (FIN 3FP2)
 1.00
Tests
 0.50
Close-Up
 1.00
TOTAL MANHOURS
 4.50
ELAPSED TIME (HOURS)
 3.50
NOTE
: For an explanation of the manhours and elapsed time, refer to the Gantt
Chart, Fig. A-FAAAA
 given in Appendix 01 - Elapsed Time Assumptions .
**CONF ALL
H. WEIGHT AND BALANCE
Not Changed
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
**CONF 001
Aircraft Maintenance Manual (AMM)
 06-20-00 06-31-53 06-41-53
12-34-24 34-11-19
ATA Common Support Data Dictionary (CSDD),
Chapter 2
Elec. Std. Practices Manual (ESPM)
 20-55-00
**CONF 002
Aircraft Maintenance Manual (AMM)
 06-20-00 06-31-53 06-41-53
12-34-24 34-11-19
ATA Common Support Data Dictionary (CSDD),
Chapter 2
Elec. Std. Practices Manual (ESPM)
 20-55-00
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 5
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A340-500/600
SERVICE BULLETIN
**CONF ALL
K. PUBLICATION AFFECTED
Aircraft Wiring List (AWL)
Illustrated Parts Catalog (IPC)
 34-11-01 34-11-19
L. INTERCHANGEABILITY/MIXABILITY
The interchangeability/mixability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
**CONF 001
DESCRIPTION
 OLD PART N˚
 NEW PART N˚
 INT
 MIXABILITY
 SEE
NOTES
AOA Probe
 0861ED
 C16291AB
 03
 NO
 (1)
NOTE
: For definitions of interchangeability codes in column INT., refer to ATA
Common Support Data Dictionary (CSDD), Chapter 2.
NOTE
: Only the mixability configuration(s) and condition(s) stated in this Service
Bulletin are approved.
NOTE
 (1)
: When AOA PN 0861ED is removed, it may be replaced:
- with the AOA PN 0861ED,
- with the AOA PN C16291AB only if both AOA probes (FINs 3FP1 and
3FP2) are replaced simultaneously.
When the new PN is removed, it must be replaced by the new PN.
**CONF 002
DESCRIPTION
 OLD PART N˚
 NEW PART N˚
 INT
 MIXABILITY
 SEE
NOTES
AOA Probe
 0861ED2
 C16291AB
 03
 NO
 (1)
NOTE
: For definitions of interchangeability codes in column INT., refer to ATA
Common Support Data Dictionary (CSDD), Chapter 2.
NOTE
: Only the mixability configuration(s) and condition(s) stated in this Service
Bulletin are approved.
NOTE
 (1)
: When AOA PN 0861ED2 is removed, it may be replaced:
- with the AOA PN 0861ED2,
- with the AOA PN C16291AB only if both AOA probes (FINs 3FP1 and
3FP2) are replaced simultaneously.
When the new PN is removed, it must be replaced by the new PN.
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 6
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A340-500/600
SERVICE BULLETIN
**CONF ALL
M. SPARES
AOA Probe 0861ED
AOA Probe 0861ED2
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 7
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A340-500/600
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 8
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A340-500/600
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
Vendor parts are to be procured from:
Equipment BFEA01
Equipment BFEA02
THALES AVIONICS S.A.S.
105, avenue du General Eisenhower
BP 63647
TOULOUSE CEDEX 1
FRANCE
Attn: Retrofit Manager
T e l :+ 3 356 11 97 69 5
F a x :+ 3 356 11 96 82 0
e-mail: retrofit@fr.thalesgroup.com
(2) Price and Availability
From Equipment BFEA01 to Equipment BFEA02
No AIRBUS kit will be provided.
Procurement terms for the equipment must be negotiated with the equipment supplier.
B. INDUSTRY SUPPORT INFORMATION
From Equipment BFEA01 to Equipment BFEA02
Industry support terms for the equipment must be negotiated with the equipment supplier.
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department.
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
France
E-mail: monitored.retrofit@airbus.com
T e l :( 3 3 )56 71 90 62 2
F a x :( 3 3 )56 19 32 74 5
C. LIST OF COMPONENTS
No Kit
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 9
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A340-500/600
SERVICE BULLETIN
D. LIST OF MATERIALS - OPERATOR SUPPLIED
(1) Consumable Materials
None
(2) Components
NOTE
: To accomplish this Service Bulletin it is necessary to use the expendable
parts listed in the subsequent referenced AMM task:
- AMM Task 34-11-19-400-801.
(3) Equipment
Equipment BFEA01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
C16291AB
 2
 SENSOR
 0861ED
 03
NOTE
: For definitions of interchangeability codes in column INT., refer to ATA
Common Support Data Dictionary (CSDD), Chapter 2.
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
Equipment BFEA02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
C16291AB
 2
 SENSOR
 0861ED2
 03
NOTE
: For definitions of interchangeability codes in column INT., refer to ATA
Common Support Data Dictionary (CSDD), Chapter 2.
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
F. TOOLING
None
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 10
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A340-500/600
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 345105-831-801-001 - Modification by Repl acement of the two AOA Probes (FINs 3FP1
and 3FP2) on Aircraft
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC. AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
"refer to" are used and the operator has a procedure accepted by the local
authority he belongs to, the accepted alternative procedure can be used. When the
words "in accordance with" are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. Other paragraphs are recommended and may be deviated
from, done as part of other actions or done with accepted methods different from
those given in the Service Bulletin, as long as the RC paragraphs can be done and
the aircraft can be put back into a serviceable condition.
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 11
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A340-500/600
SERVICE BULLETIN
Task Associated Data
**CONF 001
Zone
121 122
Modified FIN
3FP1 3FP2
Access
Door
 811
Manpower
TOTAL MANHOURS
 4.50
ELAPSED TIME (HOURS)
 3.50
**CONF 002
Zone
121 122
Modified FIN
3FP1 3FP2
Access
Door
 811
Manpower
TOTAL MANHOURS
 4.50
ELAPSED TIME (HOURS)
 3.50
**CONF ALL
A. GENERAL
**CONF 001
(1) Subtask 345105-910-001-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 12
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A340-500/600
SERVICE BULLETIN
(2) Subtask 345105-839-001-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 002
(1) Subtask 345105-910-001-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
(2) Subtask 345105-839-001-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF ALL
B. PREPARATION
**CONF 001
(1) Subtask 345105-941-001-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-860-802
Task 34-11-19-000-801
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 13
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A340-500/600
SERVICE BULLETIN
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
- Aircraft electrical network de-energized
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Do the Job Set-up procedure as specified in the removal of the AOA Probes (FINs
3FP1 and 3FP2), refer to AMM Task 34-11-19-000-801.
**CONF 002
(1) Subtask 345105-941-001-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-860-802
Task 34-11-19-000-801
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
- Aircraft electrical network de-energized
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 14
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A340-500/600
SERVICE BULLETIN
- All controls in NORM, AUTO or OFF position
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Do the Job Set-up procedure as specified in the removal of the AOA Probes (FINs
3FP1 and 3FP2), refer to AMM Task 34-11-19-000-801.
**CONF ALL
C. PROCEDURE
**CONF 001
(1) Subtask 345105-831-001-001 - Replace the AOA Probe 1 (FIN 3FP1)
Work Zones and Access Panels
Zone
 Access/Work location
121
 Access
 Door 811
Work location
 from Frame 18 to Frame 19
Manpower Resources
Manhours
 1.00
Minimum number of person
 1
Subtask elapsed time
 1.00
Skills
 NON SPECIFIC
Material necessary to do the job
Equipment BFEA01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
C16291AB
 1
 SENSOR
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
References
Aircraft Maintenance Manual (AMM)
 Task 34-11-19-000-801
Task 34-11-19-400-801
(a) Remove:
Refer to AMM Task 34-11-19-000-801
FIN 3FP1
1 AOA Probe 0861ED
(b) Install:
Refer to AMM Task 34-11-19-400-801
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 15
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A340-500/600
SERVICE BULLETIN
FIN 3FP1
1 AOA Probe C16291AB
(2) Subtask 345105-831-002-001 - Replace the AOA Probe 2 (FIN 3FP2)
Work Zones and Access Panels
Zone
 Access/Work location
122
 Access
 Door 811
Work location
 from Frame 18 to Frame 19
Manpower Resources
Manhours
 1.00
Minimum number of person
 1
Subtask elapsed time
 1.00
Skills
 NON SPECIFIC
Material necessary to do the job
Equipment BFEA01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
C16291AB
 1
 SENSOR
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
References
Aircraft Maintenance Manual (AMM)
 Task 34-11-19-000-801
Task 34-11-19-400-801
(a) Remove:
Refer to AMM Task 34-11-19-000-801
FIN 3FP2
1 AOA Probe 0861ED
(b) Install:
Refer to AMM Task 34-11-19-400-801
FIN 3FP2
1 AOA Probe C16291AB
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 16
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A340-500/600
SERVICE BULLETIN
**CONF 002
(1) Subtask 345105-831-001-002 - Replace the AOA Probe 1 (FIN 3FP1)
Work Zones and Access Panels
Zone
 Access/Work location
121
 Access
 Door 811
Work location
 from Frame 18 to Frame 19
Manpower Resources
Manhours
 1.00
Minimum number of person
 1
Subtask elapsed time
 1.00
Skills
 NON SPECIFIC
Material necessary to do the job
Equipment BFEA02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
C16291AB
 1
 SENSOR
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
References
Aircraft Maintenance Manual (AMM)
 Task 34-11-19-000-801
Task 34-11-19-400-801
(a) Remove:
Refer to AMM Task 34-11-19-000-801
FIN 3FP1
1 AOA Probe 0861ED2
(b) Install:
Refer to AMM Task 34-11-19-400-801
FIN 3FP1
1 AOA Probe C16291AB
(2) Subtask 345105-831-002-002 - Replace the AOA Probe 2 (FIN 3FP2)
Work Zones and Access Panels
Zone
 Access/Work location
122
 Access
 Door 811
Work location
 from Frame 18 to Frame 19
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 17
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A340-500/600
SERVICE BULLETIN
Manpower Resources
Manhours
 1.00
Minimum number of person
 1
Subtask elapsed time
 1.00
Skills
 NON SPECIFIC
Material necessary to do the job
Equipment BFEA02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
C16291AB
 1
 SENSOR
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
References
Aircraft Maintenance Manual (AMM)
 Task 34-11-19-000-801
Task 34-11-19-400-801
(a) Remove:
Refer to AMM Task 34-11-19-000-801
FIN 3FP2
1 AOA Probe 0861ED2
(b) Install:
Refer to AMM Task 34-11-19-400-801
FIN 3FP2
1 AOA Probe C16291AB
**CONF ALL
D. TEST
**CONF 001
(1) Subtask 345105-700-001-001 - Testing
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 34-11-19-400-801
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 18
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A340-500/600
SERVICE BULLETIN
(a) Job Set-up:
1
 Remove the safety clip(s) and/or tag(s) and close/unlock the circuit breaker(s)
as specified after the installation of the AOA Probes (FINs 3FP1 and 3FP2),
refer to AMM Task 34-11-19-400-801.
(b) Procedure:
1
 Do the test procedure as specified after the installation of the AOA Probes
(FINs 3FP1 and 3FP2), refer to AMM Task 34-11-19-400-801.
**CONF 002
(1) Subtask 345105-700-001-001 - Testing
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 34-11-19-400-801
(a) Job Set-up:
1
 Remove the safety clip(s) and/or tag(s) and close/unlock the circuit breaker(s)
as specified after the installation of the AOA Probes (FINs 3FP1 and 3FP2),
refer to AMM Task 34-11-19-400-801.
(b) Procedure:
1
 Do the test procedure as specified after the installation of the AOA Probes
(FINs 3FP1 and 3FP2), refer to AMM Task 34-11-19-400-801.
**CONF ALL
E. CLOSE-UP
**CONF 001
(1) Subtask 345105-942-001-001 - Close-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 34-11-19-400-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified after the installation of the AOA Probes
(FINs 3FP1 and 3FP2), refer to AMM Task 34-11-19-400-801.
(c) Put the aircraft back to its initial configuration.
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 19
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A340-500/600
SERVICE BULLETIN
**CONF 002
(1) Subtask 345105-942-001-001 - Close-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 34-11-19-400-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified after the installation of the AOA Probes
(FINs 3FP1 and 3FP2), refer to AMM Task 34-11-19-400-801.
(c) Put the aircraft back to its initial configuration.
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 20
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A340-500/600
SERVICE BULLETIN
Appendix 01 - Elapsed Time Assumptions
**CONF ALL
(1) For an explanation of the manhours and elapsed time, refer to the following Gantt Chart.
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A340-500/600
SERVICE BULLETIN
Appendix 01 - Elapsed Time Assumptions
**CONF ALL
ELAPSED TIME ASSUMPTION SERVICE BULLETIN No A340−34−5105
GET ACCESS
MH ET/S
SB ELAPSED TIME
4.50
3.50
STEPS
1.00 1.00
0
MH
ET/S:
PER
MANHOURS
ELAPSED TIME PER STEP
NUMBER OF PERSONS
01
02
THIS CHART IS ONLY A PROPOSAL.
OPERATORS MAY DETERMINE THAT ANOTHER WAY
TO DO THE WORK IS MORE SUITABLE FOR THEM.
01
02
NOTE:
PER
1
:
:
SB ELAPSED TIME
(HOURS)
2 41 3
IF A VSB IS INVOLVED, THE ASSOCIATED MANHOURS
ARE NOT REFLECTED IN THIS GANTT CHART.
REPLACEMENT OF THE AOA PROBE 1.00 1.00 1
CLOSE−UP 1.00 1.00 1
TOTAL MANHOURS
1.00 1.00 1
TEST 0.50 0.501
FIN 3FP1
REPLACEMENT OF THE AOA PROBE
FIN 3FP2
F_SB_345105_5_AAAA_01_00
Figure A-FAAAA - Sheet 01
Gantt Chart
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A340-500/600
SERVICE BULLETIN
REPORTING SHEET
TITLE: NAVIGATION - AOA - INSTALL AOA PROBES IN MIXED
CONFIGURATION - THALES FOR CAPT AND FIRST OFFICER AND
UTAS ON STANDBY
MODIFICATION No.: 204937S33428
Please complete the appropriate item (A or B):
A - SB WILL BE
 embodied YES/NO (if NO please comment)
If YES, aircraft concer ned (as per SB effectivity by default) and planned dates (month/year) of
embodiment:
B - SB HAS BEEN
 embodied on aircraft:
Operator comments:
From Airline:
Name/Title:
Signature: Date:
If operational documentation is affected (see Paragraph 1.K of this SB): If information is needed prior to
next normal revision or prior to SB embodiment, please indicate required service(s):
Either: Modification Operational Impact (MOI), if available YES/NO
Or : Intermediate revision YES/NO
Important Information:
 This SB will only be incorporated in your maintenance and operational
documentation if this sheet is returned to Airbus and signed by a duly authorised representative. With
the next feasible revision, this will result in
- Updating of maintenance documentation to show pre and post SB data.
- Updating of maintenance and operational documentation to show post SB data after embodiment.
If this SB requires previous or simultaneous accomplishment of other SBs, Airbus shall automatically
include them in the manual revisions. Refer to SIL 00-037 for detailed information.
Please return this completed sheet to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn: SDC32 Technical Data and Documentation Services
F A X :( + 3 3 )56 19 32 80 6
e-mail: sb.reporting@airbus.com
or via your Resident Customer Support Office.
Alternatively, SB lists via letters or fax are also accepted.
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A340-500/600
SERVICE BULLETIN
QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin. The reported data
that you provide us will be used to analyse areas of difficulties and to take corrective action to further
improve the quality of our Service Bulletins.
We thank you for the time you have taken in completing this form.
(Please rate on a scale of 1 to 4, with 4 being the highest score)
- Quality rating of this SB 4321
- Quality rating of the Accomplishment Instructions 4321
- Quality rating of the Illustrations 4321
- Is this SB easy to understand ? Y/N
If you have had difficulties in the accomplishment of this SB please quote below the area(s) and give a
short description of the issue.
Planning Material Instructions
X Effectivity X Kit content X Preparation
X Reason X List of Materials Operator Supplied X Mod/Inspection
X Manpower X Industry support X Test
X References X Re-identification X Close-Up
X Publication X Tooling X Illustrations
Comments:
Operator: Date:
Name/Title:
Please return this form to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn : SEM4 Service Bulletins Management
F A X:( 3 3 )56 19 34 25 1
Or via your Resident Customer Support Office.
DATE: Mar 26/15 SERVICE BULLETIN No.: A340-34-5105
REVISION No.: 00 - Mar 26/15 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
