# Airbus Service Bulletin A340-53-4215

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 02 ("A340-53-4215 R02"), 333 pages: PDF https://openairdocs.org/files/sha256/6a/4e/6a4ec939cf249e35ef5eac2288a5cab5035d5d85677cfcd97a8b1b394f6be4ed; text https://openairdocs.org/service-documents/airbus/a340-53-4215/file/6a4ec939cf24.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-0111; AD 2018-12-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 02 ("SB A340-53-4215_R02"), 333 pages: PDF https://openairdocs.org/files/sha256/44/50/445051b0e8192365bdbc203c07c97a09c6fb472884cf3f66ebd33a46f1f28977; text https://openairdocs.org/service-documents/airbus/a340-53-4215/file/445051b0e819.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2016-9192; AD 2017-07-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A340-53-4215
- Latest revision known: A340-53-4215, Revision 02, dated November 23, 2016 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/a340-53-4215

## ADs that cite it (3) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2018-18-16](https://openairdocs.org/ad/2018-18-16.md), effective Sep 25, 2018: Revisions 01 and 02
- [AD 2018-12-08](https://openairdocs.org/ad/2018-12-08.md), effective Aug 22, 2018: Revisions 01 and 02
- [AD 2017-07-07](https://openairdocs.org/ad/2017-07-07.md), effective May 25, 2017: Revisions 01 and 02

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/airbus/a340-53-4215/proposed.md).

## Text (333 pages)

Revision 02, the newest copy. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-0111; AD 2018-12-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 53
TITLE: FUSELAGE - CENTER FUSEL AGE - INSPECTION OF FR40 SKIN
PANEL JUNCTION
MODIFICATION No.: None
This page transmits Revision No.02 of Service Bulletin No.A340-53-4215
ADDITIONAL WORK
**CONF ALL
No additional work is required by this revision for aircraft inspected by any previous issue.
REASON
Revision No. 02 issued to extend the effectivity to include aircraft Post-MOD No. 55792S18775. Those
aircraft follow the same maintenance program than aircraft in configuration 003 of this Service Bulletin.
CHANGES
The main changes of this revision are:
- Effectivity updated
- Consumable material No. 08BBU9 replaced by consumable material No. 08BAA9
- For Config. 002, typo error corrected in the TASK 534215-833-801-001 Repair (kit 534215A02R02
cannot be used as it has not been delivered)
- Maintenance Planning Document (MPD) references added into Publication Affected
- Minor changes applied.
SUMMARY
REASON/DESCRIPTION/OPERATIONAL
CONSEQUENCES
REASON UPDATED
 R
MATERIAL PRICE INFORMATION
 MATERIAL PRICE INFORMATION TABLE
UPDATED
R
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
MATERIAL PRICE INFORMATION TABLE
UPDATED
R
MATERIAL PRICE INFORMATION TABLE
UPDATED
R
EFFECTIVITY
 OPERATOR LIST UPDATED
 R
REFERENCES / REPERCUSSIONS
 REFERENCES/REPERCUSSIONS TABLE
UPDATED
R
APPENDICES
 APPENDICES UPDATED
 R
PLANNING INFORMATION
EFFECTIVITY
 EFFECTIVITY RELATED INFORMATION
UPDATED
R
Configuration definition
CONF 001
 CONFIGURATION DEFINITION UPDATED
CONFIGURATION DESCRIPTION UPDATED
R
CONF 002
 CONFIGURATION DEFINITION UPDATED
CONFIGURATION DESCRIPTION UPDATED
R
CONF 003
 CONFIGURATION DEFINITION UPDATED
CONFIGURATION DESCRIPTION UPDATED
R
Material Effectivity
 MATERIAL EFFECTIVITY UPDATED
MATERIAL SET QUANTITY UPDATED
R
MATERIAL EFFECTIVITY UPDATED
MATERIAL SET QUANTITY UPDATED
R
MATERIAL EFFECTIVITY UPDATED
MATERIAL SET QUANTITY UPDATED
R
REASON
History
 HISTORY UPDATED
 R
Objective/Action
 OBJECTIVE/ACTION UPDATED
 R
Advantages
 ADVANTAGES UPDATED
 R
Operational/Maintenance
Consequences
OPERATIONAL/MAINTENANCE CONSEQUENCES
UPDATED
R
COMPLIANCE
Accomplishment Timescale
 ACCOMPLISHMENT TIMESCALE UPDATED
 R
Accomplishment Timescale
 ACCOMPLISHMENT TIMESCALE UPDATED
 R
Accomplishment Timescale
 ACCOMPLISHMENT TIMESCALE UPDATED
 R
PUBLICATION AFFECTED
 PUBLICATIONS AFFECTED UPDATED
 R
MATERIAL INFORMATION
MATERIAL - PRICE AND AVAILABILITY
Procurement Addresses
 PROCUREMENT ADDRESSES UPDATED
 R
Price and Availability
 PRICE AND AVAILABILITY UPDATED
MATERIAL PRICE UPDATED
R
LIST OF COMPONENTS
 LIST OF COMPONENTS UPDATED
 R
LIST OF MATERIALS - OPERATOR
SUPPLIED
Consumable Materials
Consumable CMLA01
 CONSUMABLE MATERIAL SET UPDATED
CONSUMABLE UPDATED
R
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Components
 COMPONENTS UPDATED
 R
TOOLING
Tools
 TOOLS UPDATED
 R
ACCOMPLISHMENT INSTRUCTIONS
TASK 534215- 832-801-001-Inspection
 TASK SOLUTION UPDATED
CAUTION UPDATED
NOTE UPDATED
R
Subtask 534215-910-001-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-910-001-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-910-001-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-941-001-001
 SUBTASK SOLUTION UPDATED
NOTE UPDATED
R
Subtask 534215-865-001-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-110-001-001
 SUBTASK SOLUTION UPDATED
CONSUMABLE UPDATED
MATERIAL LIST UPDATED
R
Subtask 534215-941-001-001
 SUBTASK SOLUTION UPDATED
NOTE UPDATED
R
Subtask 534215-865-001-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-110-001-001
 SUBTASK SOLUTION UPDATED
CONSUMABLE UPDATED
MATERIAL LIST UPDATED
R
Subtask 534215-941-001-001
 SUBTASK SOLUTION UPDATED
NOTE UPDATED
R
Subtask 534215-865-001-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-110-001-001
 SUBTASK SOLUTION UPDATED
CONSUMABLE UPDATED
MATERIAL LIST UPDATED
R
Subtask 534215-832-001-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-002-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-003-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-004-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-005-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-008-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-009-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Subtask 534215-832-010-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-011-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-012-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-015-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-016-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-017-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-018-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-019-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-022-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-023-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-024-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-025-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-026-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-006-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-007-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-013-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Subtask 534215-832-014-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-020-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-021-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-027-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-028-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-006-002
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-007-002
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-013-002
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-014-002
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-020-002
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-021-002
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-027-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
Subtask 534215-832-028-001
 SUBTASK SOLUTION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
R
TASK 534215- 833-801-001-Repair
 TASK SOLUTION UPDATED
NOTE UPDATED
WARNING UPDATED
CAUTION UPDATED
R
Subtask 534215-910-002-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-910-002-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-910-002-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-941-003-001
 SUBTASK SOLUTION UPDATED
NOTE UPDATED
R
Subtask 534215-861-002-001
 SUBTASK SOLUTION UPDATED
 R
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 5
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Subtask 534215-865-002-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-010-004-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-941-003-001
 SUBTASK SOLUTION UPDATED
NOTE UPDATED
R
Subtask 534215-861-002-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-865-002-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-010-004-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-941-003-001
 SUBTASK SOLUTION UPDATED
NOTE UPDATED
R
Subtask 534215-861-002-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-865-002-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-010-004-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-833-006-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-833-007-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-833-020-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-833-021-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-833-027-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-833-028-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-700-001-001
 SUBTASK SOLUTION UPDATED
NOTE UPDATED
R
Subtask 534215-700-001-002
 SUBTASK SOLUTION UPDATED
NOTE UPDATED
R
Subtask 534215-700-001-003
 SUBTASK SOLUTION UPDATED
NOTE UPDATED
R
Subtask 534215-942-001-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-942-001-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 534215-942-001-001
 SUBTASK SOLUTION UPDATED
 R
Fig. A-FFAAA
 FIGURE SOLUTION UPDATED
 R
Fig. A-FFAAA Sheet 01
 SHEET UPDATED
 R
Fig. A-FFAAA Sheet 02
 SHEET UPDATED
 R
Fig. A-FFAAA Sheet 03
 SHEET UPDATED
 R
Fig. A-FFAAA Sheet 04
 SHEET UPDATED
 R
Fig. A-FFAAA Sheet 05
 SHEET UPDATED
 R
Fig. A-FFAAA Sheet 06
 SHEET UPDATED
 R
Fig. A-FFAAB
 FIGURE SOLUTION UPDATED
 R
Fig. A-FFAAB Sheet 01
 SHEET UPDATED
 R
Fig. A-FFAAB Sheet 02
 SHEET UPDATED
 R
Fig. A-FRA
 FIGURE DELETED FOR APPLICABLE MSN
 D
Appendix 01 - Inspection Report
APPENDIX CONTENT
 APPENDIX CONTENT ADDED
 N
Fig. A-FAAAA
 FIGURE SOLUTION ADDED
 N
Fig. A-FAAAA Sheet 01
 SHEET ADDED
 N
Fig. A-FAAAA Sheet 02
 SHEET ADDED
 N
Fig. A-FAAAA Sheet 03
 SHEET ADDED
 N
Fig. A-FAAAA Sheet 04
 SHEET ADDED
 N
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 6
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Fig. A-FAAAA Sheet 05
 SHEET ADDED
 N
Fig. A-FAAAA Sheet 06
 SHEET ADDED
 N
Fig. A-FAAAA Sheet 07
 SHEET ADDED
 N
Fig. A-FAAAA Sheet 08
 SHEET ADDED
 N
Fig. A-FAAAB
 FIGURE SOLUTION ADDED
 N
Fig. A-FAAAB Sheet 01
 SHEET ADDED
 N
Fig. A-FAAAB Sheet 02
 SHEET ADDED
 N
Fig. A-FAAAB Sheet 03
 SHEET ADDED
 N
Fig. A-FAAAB Sheet 04
 SHEET ADDED
 N
Fig. A-FAAAB Sheet 05
 SHEET ADDED
 N
Fig. A-FAAAB Sheet 06
 SHEET ADDED
 N
Fig. A-FAAAB Sheet 07
 SHEET ADDED
 N
Fig. A-FAAAB Sheet 08
 SHEET ADDED
 N
Fig. A-FAAAC
 FIGURE SOLUTION ADDED
 N
Fig. A-FAAAC Sheet 01
 SHEET ADDED
 N
Fig. A-FAAAC Sheet 02
 SHEET ADDED
 N
Fig. A-FAAAC Sheet 03
 SHEET ADDED
 N
Fig. A-FAAAC Sheet 04
 SHEET ADDED
 N
Fig. A-FAAAC Sheet 05
 SHEET ADDED
 N
Fig. A-FAAAC Sheet 06
 SHEET ADDED
 N
Fig. A-FAAAC Sheet 07
 SHEET ADDED
 N
Fig. A-FAAAC Sheet 08
 SHEET ADDED
 N
FILING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete document.
Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
HISTORY OF PREVIOUS REVISIONS
Revision No. 01 issued to modify for Config. 002 and Config. 003 the fasteners installed at holes H341
and H342, and for Config. 001, Config. 002 and Config. 003 the fasteners installed at hole H348.
REVISION SEQUENCE
ORIGINAL: Jun 21/13
REVISION No. : 01 - Apr 17/14
REVISION No. : 02 - Nov 23/16
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 7
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A340
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
This Page Intentionally Left Blank
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 8
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A340
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 53
TITLE: FUSELAGE - CENTER FUSEL AGE - INSPECTION OF FR40 SKIN
PANEL JUNCTION
**CONF ALL
MODIFICATIONS
None
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
This Inspection Service Bulletin (ISB) originates from the high rate of findings at
 F r a m e4 0o nt h el o w e r
shell panel junction, around stringer (STGR) 38 level, LH/RH side, in configuration A340 aircraft Pre-
modifications No.
 44360S13013 and No.
 44360S13482.
This ISB mandates the High Frequency Eddy Current (HFEC) rototest inspection of 10 fastener holes at
Frame 40 lower shell panel junction, STGR38 to STGR41, LH and RH side for all aircraft Post-
modifications No.
 44360S13013 and No.
 44360S13482.
For aircraft previously inspected once thru Technical Disposition (TD) Ref. LR57D11023360, next
inspection is due based on interval value given in this ISB.
Accomplishment of this ISB will permit early detection of cracks on the
 Frame 40 lower shell panel
junction, LH and RH side at the level of STGR38 to STGR41 and will ensure that the structural integrity
of the area is maintained.
The Operational/Maintenance Consequences of this Service Bulletin are covered by the update of the
affected publications detailed in ’PLANNING INFORMATION’.
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 LROPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 NO
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A340
SERVICE BULLETIN
SUMMARY
NOTE
 (1)
: Service Bulletin must be accomplished.
MATERIAL PRICE INFORMATION
**CONF 001
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Kit 534215A01R03
 2
 4,040.00
 Screws, Washers, Nuts
Supplementary kit
534215A01S01
2
 171.80
 Screws
TOTAL
 4,211.80
**CONF 002
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Kit 534215A02R03
 2
 3,880.00
 Screws, Washers, Nuts
Supplementary kit
534215A02S01
2
 676.00
 Screws, Washers, Nuts
Supplementary kit
534215A02S02
2
 171.80
 Screws
TOTAL
 4,727.80
**CONF 003
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Kit 534215A03R03
 2
 3,880.00
 Screws, Washers, Nuts
EFFECTIVITY
**CONF ALL
This Service Bulletin is applicable to this (these) operator(s) :
09M
 83V
 ABD ACA
 AFR AIB ALD
 ARG AXY
 BEK
 BOE
 CAL CPA
DLH EDW
 F2I
 FIN GAF HFM
 HFY IBE IRM
 MAU MDG MRJ
 PAL
PUE
 QQE
 ROI
 S3R SAA SAS SLM
 SVW
 SWR THT THY UAE
CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU
 53.30.00.003
OEB
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A340
SERVICE BULLETIN
SUMMARY
AOT
 None
SIL
 None
ISI
 None
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 OIT 999.0082/12
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 NO
HARD
 NO
SOFT
 NO
OBRM
 NO
MANPOWER
**CONF 001
Task 534215-832-801-001: Inspection
TOTAL MANHOURS
 42.00
ELAPSED TIME (HOURS)
 21.00
Task 534215-833-801-001: Repair
TOTAL MANHOURS
 46.00
ELAPSED TIME (HOURS)
 23.00
**CONF 002
Task 534215-832-801-001: Inspection
TOTAL MANHOURS
 42.00
ELAPSED TIME (HOURS)
 21.00
Task 534215-833-801-001: Repair
TOTAL MANHOURS
 46.00
ELAPSED TIME (HOURS)
 23.00
**CONF 003
Task 534215-832-801-001: Inspection
TOTAL MANHOURS
 42.00
ELAPSED TIME (HOURS)
 21.00
Task 534215-833-801-001: Repair
TOTAL MANHOURS
 46.00
ELAPSED TIME (HOURS)
 23.00
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A340
SERVICE BULLETIN
SUMMARY
APPENDICES
**CONF ALL
Appendix 01 - Inspection Report
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A340
SERVICE BULLETIN
SUMMARY
**CONF 001
FR47
FR40
FR40
LH SHOWN
STGR38
STGR39
STGR40
STGR37
VIEW LOOKING AFT
STGR41
C
B A
B
D
 − Z141 Z142A
F_SB_534215_5_SAAA_01_02
Figure A-FSAAA - Sheet 01
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 5
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A340
SERVICE BULLETIN
SUMMARY
**CONF 001
FR40
RH SHOWN
STGR38
STGR39
STGR40
STGR37
VIEW LOOKING AFT STGR41
E
C
F_SB_534215_5_SAAA_02_02
Figure A-FSAAA - Sheet 02
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 6
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A340
SERVICE BULLETIN
SUMMARY
**CONF 001
STGR38
STGR39
STGR40
STGR41
STGR38
STGR39
STGR40
STGR41
H378
H374
H341
H342
H343
H344
H348
H362
H375
H381
H378
H374
H341
H342
H343
H344
H348
H362
H375
H381
FWD FWD
D E
HOLES OF THE AREA A TO BE INSPECTED
NOTE:
FASTENERS NOT AFFECTED
HOLE NUMBERAREA
341, 342, 343, 344 LH/RH SIDESA
362, 374, 375, 378, 381 LH/RH SIDES AND 348 LH SIDEB
348 RH SIDEC
HOLES OF THE AREA B TO BE INSPECTED
HOLE OF THE AREA C TO BE INSPECTED
FR40 FR40
F_SB_534215_5_SAAA_03_01
Figure A-FSAAA - Sheet 03
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 7
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A340
SERVICE BULLETIN
SUMMARY
**CONF 002 thru 003
FR47
FR40
FR40
LH SHOWN
STGR38
STGR39
STGR40
STGR37
VIEW LOOKING AFT
STGR41
C
B A
B
D
 − Z141 Z142A
F_SB_534215_5_SAAB_01_02
Figure A-FSAAB - Sheet 01
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 8
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A340
SERVICE BULLETIN
SUMMARY
**CONF 002 thru 003
FR40
RH SHOWN
STGR38
STGR39
STGR40
STGR37
VIEW LOOKING AFT
STGR41
E
C
F_SB_534215_5_SAAB_02_02
Figure A-FSAAB - Sheet 02
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 9
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A340
SERVICE BULLETIN
SUMMARY
**CONF 002 thru 003
STGR38
STGR39
STGR40
STGR41
STGR38
STGR39
STGR40
STGR41
H378
H374
H341
H342
H343
H344
H348
H362
H375
H381
H378
H374
H341
H342
H343
H344
H348
H362
H375
H381
FWD FWD
D E
NOTE:
FASTENERS NOT AFFECTED
HOLES TO BE INSPECTED
FR40 FR40
F_SB_534215_5_SAAB_03_01
Figure A-FSAAB - Sheet 03
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 10
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A340
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 53
TITLE: FUSELAGE - CENTER FUSEL AGE - INSPECTION OF FR40 SKIN
PANEL JUNCTION
MODIFICATION No.: None
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
NOTE
: This Service Bulletin is applicable only to aircraft on which MOD
No. 44360S13013 (MODIFY FR40 A ND FRONT SPAR) or MOD No.
44360S13482 (MODIFY FRONT SPAR WEB) are embodied.
(1) Models
340-212 340-213 340-312 340-313
(2) Effectivity by MSN
0178-0180 0185-0186
 0190 0192-0194 0197
 0199 0201-0202 0204 0207-0208 0210
0212-0215
 0217-0218
 0220-0221 0227-0228 0233 0236-0237 0242-0243 0245-0246
0252 0257 0260 0263-0264 0268 0270 0274
 0278 0280 0282 0292 0297 0302 0304
0307 0310 0318-0319 0321 0325 0327 0329 0331-0332 0335 0347 0352 0354-0355
0367 0373-0374 0377-0379 0381 0385 0387 0390 0395 0399 0402 0406 0411 0413
0415
 0424 0430
 0433-0435 0438 0446-0447 0450 0459 0467 0470 0474 0483 0528
0538 0541 0544-0546 0554 0556 0559 0561-0562 0582 0585 0590 0598 0643 0646
0651 0668 0793 0800 0835 0844 0921
 0938
 0955
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 1
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A340
SERVICE BULLETIN
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
09M
 0483
83V
 0280
 0292
ABD
 0210
ACA
 0278
AFR
 0186 0207 0237 0245 0246 0260 0307 0310 0377 0399
AIB
 0192
 0243
 0264
ALD
 0178
ARG
 0193 0373
AXY
 0374
BEK
 0381
BOE
 0554
CAL
 0402 0406 0411 0415 0433 0541
CPA
 0208 0218 0220 0227 0228
DLH
 0213 0233 0252 0297 0304 0321 0325 0327 0335 0347 0352 0354
0379 0390 0434 0447
EDW
 0562
F2I
 0214
FIN
 0835 0844 0921
 0938
GAF
 0274 0355
HFM
 0367
HFY
 0190 0202
IBE
 0217 0221 0329
IRM
 0282
MAU
 0194 0268 0793 0800
MDG
 0319
MRJ
 0257
PAL
 0302 0318 0332 0387 0459
 0474
PUE
 0212
 0215
QQE
 0528
ROI
 0199
 0201
S3R
 0204
SAA
 0197 0378 0544 0582 0590 0643 0646 0651
SAS
 0413 0424 0430 0435 0450 0467 0470
SLM
 0242
SVW
 0955
SWR
 0179 0263 0538 0545 0546 0556 0559 0561 0585 0598
THT
 0385 0395 0438 0446 0668
THY
 0180 0270 0331
UAE
 0185 0236
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 2
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A340
SERVICE BULLETIN
(4) Configuration by MSN
MSN
 CONFIGURATION
0178 0179 0180 0185 0186 0190 0192 0193 0194 0197 0199
0201 0202 0204 0207 0208 0210 0212 0213 0214 0215 0217
0218 0220 0221 0227 0228 0233
001
0236 0237 0242 0243 0245 0246 0252 0257 0260 0263 0264
0268 0270 0274 0278 0280 0282 0292 0297 0302 0304 0307
0310 0318 0319 0321 0325 0327 0329 0331 0332 0335 0347
0352 0354 0355 0367 0373 0374 0377 0378 0379 0381 0385
0387 0390 0395 0399 0402 0406 0411 0413 0415 0424 0430
0433 0434 0435 0438 0446 0447 0450 0459 0467 0470 0474
0483 0528 0538 0541 0544 0545 0546 0554 0556 0559 0561
0562 0582 0585 0590 0598 0643 0646 0651 0668 0793 0800
002
0835 0844 0921
 0938
 0955
 003
(5) Configuration definition
**CONF 001
Config. 001 is valid for aircraft on which:
- Service Bulletin No. A340-53-4104 is accomplished
and on which:
- MOD No. 45899S13951 and
- MOD No. 45899S13958 and
- MOD No. 55306S18660 are not embodied.
**CONF 002
Config. 002 is valid for aircraft on which:
- MOD No. 45899S13951 or
- MOD No. 45899S13958 are embodied
and on which:
- MOD No. 55306S18660 is not embodied.
**CONF 003
Config. 003 is valid for aircraft on which:
- MOD No. 45899S13951 and MOD No. 55306S18660 or
- MOD No. 45899S13958 and MOD No. 55306S18660 are embodied.
(6) Material Effectivity
**CONF 001
MATERIAL
 QTY PER A/C
 SEE NOTES
Kit 534215A01R03
 2
Supplementary kit 534215A01S01
 2
Consumable CMLA01
 As required
**CONF 002
MATERIAL
 QTY PER A/C
 SEE NOTES
Kit 534215A02R03
 2
Supplementary kit 534215A02S01
 2
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 3
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A340
SERVICE BULLETIN
MATERIAL
 QTY PER A/C
 SEE NOTES
Supplementary kit 534215A02S02
 2
Consumable CMLA01
 As required
**CONF 003
MATERIAL
 QTY PER A/C
 SEE NOTES
Kit 534215A03R03
 2
Consumable CMLA01
 As required
**CONF ALL
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
This Inspection Service Bulletin (ISB) originates from the high rate of findings at
 Frame
40 on the lower shell panel junction, around stringer (STGR) 38 level, LH/RH side, in
configuration A340 aircraft Pre-modifications No.
 44360S13013 and No.
 44360S13482.
(2) Objective/Action
This ISB mandates the High Frequency Eddy Current (HFEC) rototest inspection of 10
fastener holes at
 Frame 40 lower shell panel junction, STGR38 to STGR41, LH and RH
side for all aircraft Post-modifications No.
 44360S13013 and No.
 44360S13482.
For aircraft previously inspected once thru Technical Disposition (TD) Ref.
LR57D11023360, next inspection is due based on interval value given in this ISB.
(3) Advantages
Accomplishment of this ISB will permit early detection of cracks on the
 Frame 40 lower
shell panel junction, LH and RH side at the level of STGR38 to STGR41 and will ensure
that the structural integrity of the area is maintained.
(4) Operational/Maintenance Consequences
The Operational/Maintenance Consequences of this Service Bulletin are covered by the
update of the affected publications detailed in ’PLANNING INFORMATION’.
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 4
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A340
SERVICE BULLETIN
**CONF 001
Task 534215-832-801-001: Inspection
(1) Do a check of the Fastener Holes at Second Oversize Diameter of the Area A
located at Frame 40 Lower Shell Panel Junction, LH Side
(2) Do a check of the Fastener Holes at Second Oversize Diameter of the Area A
located at Frame 40 Lower Shell Panel Junction, RH Side
(3) Do a check of the Fastener Holes at Nominal Diameter of the Area B located at
Frame 40 Lower Shell Panel Junction, LH Side
(4) Do a check of the Fastener Holes at Nominal Diameter of the Area B located at
Frame 40 Lower Shell Panel Junction, RH Side
(5) Do a check of the Fastener Hole at First Oversize Diameter of the Area C located at
Frame 40 Lower Shell Panel Junction, RH Side
(6) Do a Rototest Inspection of the Fastener Holes at Second Oversize Diameter of the
Area A located at Frame 40 Lower Shell Panel Junction, LH Side
(7) Do a Rototest Inspection of the Fastener Holes at Second Oversize Diameter of the
Area A located at Frame 40 Lower Shell Panel Junction, RH Side
(8) Do a Rototest Inspection of the Fastener Holes at Nominal Diameter of the Area B
located at Frame 40 Lower Shell Panel Junction, LH Side
(9) Do a Rototest Inspection of the Fastener Holes at Nominal Diameter of the Area B
located at Frame 40 Lower Shell Panel Junction, RH Side
(10) Do a Rototest Inspection of the Fastener Hole at First Oversize Diameter of the
Area C located at Frame 40 Lower Shell Panel Junction, RH Side
(11) Do a check of the Fastener Holes at Next Nominal Diameter of the Area A located
at Frame 40 Lower Shell Panel Junction, LH Side
(12) Do a check of the Fastener Holes at Next Nominal Diameter of the Area A located
at Frame 40 Lower Shell Panel Junction, RH Side
(13) Do a check of the Fastener Holes at First Oversize Diameter of the Area B located
at Frame 40 Lower Shell Panel Junction, LH Side
(14) Do a check of the Fastener Holes at First Oversize Diameter of the Area B located
at Frame 40 Lower Shell Panel Junction, RH Side
(15) Do a check of the Fastener Hole at Second Oversize Diameter of the Area C
located at Frame 40 Lower Shell Panel Junction, RH Side
(16) Do a Rototest Inspection of the Fastener Holes at Next Nominal Diameter of the
Area A located at Frame 40 Lower Shell Panel Junction, LH Side
(17) Do a Rototest Inspection of the Fastener Holes at Next Nominal Diameter of the
Area A located at Frame 40 Lower Shell Panel Junction, RH Side
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 5
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A340
SERVICE BULLETIN
(18) Do a Rototest Inspection of the Fastener Holes at First Oversize Diameter of the
Area B located at Frame 40 Lower Shell Panel Junction, LH Side
(19) Do a Rototest Inspection of the Fastener Holes at First Oversize Diameter of the
Area B located at Frame 40 Lower Shell Panel Junction, RH Side
(20) Do a Rototest Inspection of the Fastener Hole at Second Oversize Diameter of the
Area C located at Frame 40 Lower Shell Panel Junction, RH Side
Task 534215-833-801-001: Repair
(1) Install New same Fasteners at Second Oversize Diameter of the Area A in transition
fit, LH Side
(2) Install New same Fasteners at Second Oversize Diameter of the Area A in transition
fit, RH Side
(3) Install New same Fasteners at Nominal Diameter of the Area B in transition fit, LH
Side
(4) Install New same Fasteners at Nominal Diameter of the Area B in transition fit, RH
Side
(5) Install New same Fastener at First Oversize Diameter of the Area C in transition fit,
RH Side
(6) Oversize the Holes of the Area A to Next Nominal Diameter in transition fit, LH Side
(7) Oversize the Holes of the Area A to Next Nominal Diameter in transition fit, RH Side
(8) Oversize the Holes of the Area B to First Oversize Diameter in transition fit, LH Side
(9) Oversize the Holes of the Area B to First Oversize Diameter in transition fit, RH Side
(10) Oversize the Hole of the Area C to Second Oversize Diameter in transition fit, RH
Side
(11) Install in transition fit Relevant Fasteners at Next Nominal Diameter of the Area A,
LH Side
(12) Install in transition fit Relevant Fasteners at Next Nominal Diameter of the Area A,
RH Side
(13) Install in transition fit Relevant Fasteners at First Oversize Diameter of the Area B,
LH Side
(14) Install in transition fit Relevant Fasteners at First Oversize Diameter of the Area B,
RH Side
(15) Install in transition fit Relevant Fastener at Second Oversize Diameter of the Area
C, RH Side
(16) Install New same Fasteners at Next Nominal Diameter of the Area A in transition fit,
LH Side
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 6
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A340
SERVICE BULLETIN
(17) Install New same Fasteners at Next Nominal Diameter of the Area A in transition fit,
RH Side
(18) Install New same Fasteners at First Oversize Diameter of the Area B in transition fit,
LH Side
(19) Install New same Fasteners at First Oversize Diameter of the Area B in transition fit,
RH Side
(20) Install New same Fastener at Second Oversize Diameter of the Area C in transition
fit, RH Side
**CONF 002
Task 534215-832-801-001: Inspection
(1) Do a check of the Fastener Holes at Nominal Diameter located at Frame 40 Lower
Shell Panel Junction, LH Side
(2) Do a check of the Fastener Holes at Nominal Diameter located at Frame 40 Lower
Shell Panel Junction, RH Side
(3) Do a Rototest Inspection of the Fastener Holes at Nominal Diameter at Frame 40
Lower Shell Panel Junction, LH Side
(4) Do a Rototest Inspection of the Fastener Holes at Nominal Diameter at Frame 40
Lower Shell Panel Junction, RH Side
(5) Do a check of the Fastener Holes at First Oversize Diameter at Frame 40 Lower
Shell Panel Junction, LH Side
(6) Do a check of the Fastener Holes at First Oversize Diameter at Frame 40 Lower
Shell Panel Junction, RH Side
(7) Do a Rototest Inspection of the Fastener Holes at First Oversize Diameter at Frame
40 Lower Shell Panel Junction, LH Side
(8) Do a Rototest Inspection of the Fastener Holes at First Oversize Diameter at Frame
40 Lower Shell Panel Junction, RH Side
Task 534215-833-801-001: Repair
(1) Install New same Fasteners at Nominal Diameter in transition fit, LH Side
(2) Install New same Fasteners at Nominal Diameter in transition fit, RH Side
(3) Oversize the Holes to First Oversize Diameter in transition fit, LH Side
(4) Oversize the Holes to First Oversize Diameter in transition fit, RH Side
(5) Install in transition fit Relevant Fasteners at First Oversize Diameter, LH Side
(6) Install in transition fit Relevant Fasteners at First Oversize Diameter, RH Side
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 7
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A340
SERVICE BULLETIN
(7) Install New same Fasteners at First Oversize Diameter in transition fit, LH Side
(8) Install New same Fasteners at First Oversize Diameter in transition fit, RH Side
**CONF 003
Task 534215-832-801-001: Inspection
(1) Do a check of the Fastener Holes at Nominal Diameter located at Frame 40 Lower
Shell Panel Junction, LH Side
(2) Do a check of the Fastener Holes at Nominal Diameter located at Frame 40 Lower
Shell Panel Junction, RH Side
(3) Do a Rototest Inspection of the Fastener Holes at Nominal Diameter at Frame 40
Lower Shell Panel Junction, LH Side
(4) Do a Rototest Inspection of the Fastener Holes at Nominal Diameter at Frame 40
Lower Shell Panel Junction, RH Side
(5) Do a check of the Fastener Holes at First Oversize Diameter at Frame 40 Lower
Shell Panel Junction, LH Side
(6) Do a check of the Fastener Holes at First Oversize Diameter at Frame 40 Lower
Shell Panel Junction, RH Side
(7) Do a Rototest Inspection of the Fastener Holes at First Oversize Diameter at Frame
40 Lower Shell Panel Junction, LH Side
(8) Do a Rototest Inspection of the Fastener Holes at First Oversize Diameter at Frame
40 Lower Shell Panel Junction, RH Side
Task 534215-833-801-001: Repair
(1) Install New same Fasteners at Nominal Diameter in transition fit, LH Side
(2) Install New same Fasteners at Nominal Diameter in transition fit, RH Side
(3) Oversize the Holes to First Oversize Diameter in transition fit, LH Side
(4) Oversize the Holes to First Oversize Diameter in transition fit, RH Side
(5) Install in transition fit Relevant Fasteners at First Oversize Diameter, LH Side
(6) Install in transition fit Relevant Fasteners at First Oversize Diameter, RH Side
(7) Install New same Fasteners at First Oversize Diameter in transition fit, LH Side
(8) Install New same Fasteners at First Oversize Diameter in transition fit, RH Side
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 8
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A340
SERVICE BULLETIN
**CONF ALL
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
**CONF 001
This Service Bulletin has been classified Mandatory by the issue of an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA). The AD must
be used as the reference document for the mandated accomplishment timescale.
Table 1, Config. 001 - Check of the Fastener Holes of the Area A located at Frame 40 lower Shell
Panel Junction, LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
A340-200,
WV002 Serie
FC optimized
set: 26,600
FC/107,200 FH
or
FH optimized
set: 21,900
FC/149,100 FH
See NOTE (*)
All aircraft
A340-300,
WV020 Serie
D oac h e c ko f
the Fastener
Holes at
Second
Oversize
Diameter on LH
and RH Sides,
refer to
SUBTASK
534215-832-001
001 for LH Side
and to
SUBTASK
534215-832-002
001 for RH
Side
FC optimized
set: 21,900
FC/88,100 FH
or
FH optimized
set: 18,100
FC/122,500 FH
See NOTE (*)
None
 None
Hole diameter
not in tolerance
of the transition
fit as second
oversize
All A340 WV
 Contact Airbus
 Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 9
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A340
SERVICE BULLETIN
Table 1, Config. 001 - Check of the Fastener Holes of the Area A located at Frame 40 lower Shell
Panel Junction, LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
Hole diameter
in tolerance of
the transition fit
as second
oversize
All A340 WV
 Do a Rototest
Inspection of
the Fastener
Holes at
Second
Oversize
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-008
001 for LH Side
and/or to
SUBTASK
534215-832-009
001 for RH
Side
Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 10
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29

@A340
SERVICE BULLETIN
Table 1, Config. 001 - Check of the Fastener Holes of the Area A located at Frame 40 lower Shell
Panel Junction, LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
All A340 WV
 Install new
Same
Fasteners at
Second
Oversize
Diameter in
transition fit on
LH and/or RH
Sides, refer to
SUBTASK
534215-833-001
001 for LH Side
and/or to
SUBTASK
534215-833-002
001 for RH
Side
and
Before next
flight
None
 None
A340-300,
WV002 Serie
FC optimized
set: 24,600
FC/98,700 FH
or
FH optimized
set: 20,400
FC/138,700 FH
See NOTE (*)
No crack found
A340-300,
WV020 Serie
Repeat the
check of the
Fastener Holes
at Second
Oversize on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-001
001 for LH Side
and/or to
SUBTASK
534215-832-002
001 for RH
Side
None
 None
FC optimized
set: 20,200
FC/81,100 FH
or
FH optimized
set: 16,900
FC/114,000 FH
See NOTE (*)
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 11
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 30

@A340
SERVICE BULLETIN
Table 1, Config. 001 - Check of the Fastener Holes of the Area A located at Frame 40 lower Shell
Panel Junction, LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
Crack found
 All A340 WV
 Oversize the
Holes to Next
Nominal
Diameter in
transition fit on
LH and/or RH
Sides, refer to
SUBTASK
534215-833-008
001 for LH Side
and/or to
SUBTASK
534215-833-009
001 for RH
Side
and
do a rototest
inspection
Before next
flight
None
 None
Crack found
after rototest
inspection
All A340 WV
 Contact Airbus
 Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 12
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 31

@A340
SERVICE BULLETIN
Table 1, Config. 001 - Check of the Fastener Holes of the Area A located at Frame 40 lower Shell
Panel Junction, LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
All A340 WV
 Install in
transition fit
Relevant
Fasteners at
Next nominal
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-833-015
001 for LH Side
and/or to
SUBTASK
534215-833-016
001 for RH
Side
and
Before next
flight
None
 None
A340-300,
WV002 Serie
FC optimized
set: 24,600
FC/98,700 FH
or
FH optimized
set: 20,400
FC/138,700 FH
See NOTE (*)
No crack found
after rototest
inspection
A340-300,
WV020 Serie
D oac h e c ko f
the Fastener
Holes at Next
Nominal
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-015
001 for LH Side
and/or to
SUBTASK
534215-832-016
001 for RH
Side
None
 None
FC optimized
set: 20,200
FC/81,100 FH
or
FH optimized
set: 16,900
FC/114,000 FH
See NOTE (*)
Hole diameter
not in tolerance
of the transition
fit as next
nominal
All A340 WV
 Contact Airbus
 Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 13
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 32

@A340
SERVICE BULLETIN
Table 1, Config. 001 - Check of the Fastener Holes of the Area A located at Frame 40 lower Shell
Panel Junction, LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
Hole diameter
in tolerance of
the transition fit
as next nominal
All A340 WV
 Do a Rototest
Inspection of
the Fastener
Holes at Next
Nominal
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-022
001 for LH Side
and/or to
SUBTASK
534215-832-023
001 for RH
Side
Before next
flight
None
 None
Crack found
 All A340 WV
 Contact Airbus
 Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 14
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 33

@A340
SERVICE BULLETIN
Table 1, Config. 001 - Check of the Fastener Holes of the Area A located at Frame 40 lower Shell
Panel Junction, LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
All A340 WV
 Install New
same
Fasteners at
Next Nominal
Diameter in
transition fit on
LH and/or RH
Sides, refer to
SUBTASK
534215-833-022
001 for LH Side
and/or to
SUBSTASK
534215-833-023
001 for RH
Side
and
Before next
flight
None
 None
A340-200,
WV002 Serie
FC optimized
set: 24,600
FC/98,700 FH
or
FH optimized
set: 20,400
FC/138,700 FH
See NOTE (*)
No crack found
A340-300,
WV020 Serie
Repeat the
check of the
Fastener Holes
at Next
Nominal
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-015
001 for LH Side
and/or to
SUBTASK
534215-832-016
001 for RH
Side
None
 None
FC optimized
set: 20,200
FC/81,100 FH
or
FH optimized
set: 16,900
FC/114,000 FH
See NOTE (*)
NOTE (*): For FH and FC optimization on A340 aircraft, operators shall select threshold/interval that
better suits aircraft operation and utilization (Refer to OIT 999.0086/11).
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 15
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 34

@A340
SERVICE BULLETIN
Table 2, Config. 001 - Check of the Fastener Holes of the Area B located at Frame 40 lower Shell
Panel Junction, LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
A340-200,
WV002 Serie
FC optimized
set: 26,600
FC/107,200 FH
or
FH optimized
set: 21,900
FC/149,100 FH
See NOTE (*)
All aircraft
A340-300,
WV020 Serie
D oac h e c ko f
the Fastener
Holes at
Nominal
Diameter on LH
and RH Sides,
refer to
SUBTASK
534215-832-003
001 for LH Side
and to
SUBTASK
534215-832-004
001 for RH
Side
FC optimized
set: 21,900
FC/88,100 FH
or
FH optimized
set: 18,100
FC/122,500 FH
See NOTE (*)
None
 None
Hole diameter
not in tolerance
of the transition
fit as nominal
All A340 WV
 Contact Airbus
 Before next
flight
None
 None
Hole diameter
in tolerance of
the transition fit
as nominal
All A340 WV
 Do a Rototest
Inspection of
the Fastener
Holes at
Nominal
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-010
001 for LH Side
and/or to
SUBTASK
534215-832-011
001 for RH
Side
Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 16
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 35

@A340
SERVICE BULLETIN
Table 2, Config. 001 - Check of the Fastener Holes of the Area B located at Frame 40 lower Shell
Panel Junction, LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
All A340 WV
 Install New
same
Fasteners at
Nominal
Diameter in
transition fit on
LH and/or RH
Sides, refer to
SUBTASK
534215-833-003
001 for LH Side
and/or to
SUBTASK
534215-833-004
001 for RH
Side
and
Before next
flight
None
 None
A340-200,
WV002 Serie
FC optimized
set: 24,600
FC/98,700 FH
or
FH optimized
set: 20,400
FC/138,700 FH
See NOTE (*)
No crack found
A340-300,
WV020 Serie
Repeat the
check of the
Fastener Holes
at Nominal
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-003
001 for LH Side
and/or to
SUBTASK
534215-832-004
001 for RH
Side
None
 None
FC optimized
set: 20,200
FC/81,100 FH
or
FH optimized
set: 16,900
FC/114,000 FH
See NOTE (*)
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 17
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 36

@A340
SERVICE BULLETIN
Table 2, Config. 001 - Check of the Fastener Holes of the Area B located at Frame 40 lower Shell
Panel Junction, LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
Crack found
 All A340 WV
 Oversize the
Holes to First
Oversize
Diameter in
transition fit on
LH and/or RH
Sides, refer to
SUBTASK
534215-833-010
001 for LH Side
and/or to
SUBTASK
534215-833-011
001 for RH
Side
and
do a rototest
inspection
Before next
flight
None
 None
Crack found
after rototest
inspection
All A340 WV
 Contact Airbus
 Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 18
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 37

@A340
SERVICE BULLETIN
Table 2, Config. 001 - Check of the Fastener Holes of the Area B located at Frame 40 lower Shell
Panel Junction, LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
All A340 WV
 Install in
transition fit
Relevant
Fasteners at
First Oversize
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-833-017
001 for LH Side
and/or to
SUBTASK
534215-833-018
001 for RH
Side
and
Before next
flight
None
 None
A340-200,
WV002 Serie
FC optimized
set: 24,600
FC/98,700 FH
or
FH optimized
set: 20,400
FC/138,700 FH
See NOTE (*)
No crack found
after rototest
inspection
A340-300,
WV020 Serie
D oac h e c ko f
the Fastener
Holes at First
Oversize
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-017
001 for LH Side
and/or to
SUBTASK
534215-832-018
001 for RH
Side
None
 None
FC optimized
set: 20,200
FC/81,100 FH
or
FH optimized
set: 16,900
FC/114,000 FH
See NOTE (*)
Hole diameter
not in tolerance
of the transition
fit as first
oversize
All A340 WV
 Contact Airbus
 Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 19
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 38

@A340
SERVICE BULLETIN
Table 2, Config. 001 - Check of the Fastener Holes of the Area B located at Frame 40 lower Shell
Panel Junction, LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
Hole diameter
in tolerance of
the transition fit
as first oversize
All A340 WV
 Do a Rototest
Inspection of
the Fastener
Holes at First
Oversize
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-024
001 for LH Side
and/or to
SUBTASK
534215-832-025
001 for RH
Side
Before next
flight
None
 None
Crack found
 All A340 WV
 Contact Airbus
 Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 20
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 39

@A340
SERVICE BULLETIN
Table 2, Config. 001 - Check of the Fastener Holes of the Area B located at Frame 40 lower Shell
Panel Junction, LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
All A340 WV
 Install New
same
Fasteners at
First Oversize
Diameter in
transition fit on
LH and/or RH
Sides, refer to
SUBTASK
534215-833-024
001 for LH Side
and/or to
SUBSTASK
534215-833-025
001 for RH
Side
and
Before next
flight
None
 None
A340-200,
WV002 Serie
FC optimized
set: 24,600
FC/98,700 FH
or
FH optimized
set: 20,400
FC/138,700 FH
See NOTE (*)
No crack found
A340-300,
WV020 Serie
Repeat the
check of the
Fastener Holes
at First
Oversize
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-017
001 for LH Side
and/or to
SUBTASK
534215-832-018
001 for RH
Side
None
 None
FC optimized
set: 20,200
FC/81,100 FH
or
FH optimized
set: 16,900
FC/114,000 FH
See NOTE (*)
NOTE (*): For FH and FC optimization on A340 aircraft, operators shall select threshold/interval that
better suits aircraft operation and utilization (Refer to OIT 999.0086/11).
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 21
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 40

@A340
SERVICE BULLETIN
Table 3, Config. 001 - Check of the Fastener Hole of the Area C located at Frame 40 lower Shell
Panel Junction, RH Side
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
A340-200,
WV002 Serie
FC optimized
set: 26,600
FC/107,200 FH
or
FH optimized
set: 21,900
FC/149,100 FH
See NOTE (*)
All aircraft
A340-300,
WV020 Serie
D oac h e c ko f
the Fastener
Hole at First
Oversize
Diameter on
RH Side, refer
to SUBTASK
534215-832-005
001
 FC optimized
set: 21,900
FC/88,100 FH
or
FH optimized
set: 18,100
FC/122,500 FH
See NOTE (*)
None
 None
Hole diameter
not in tolerance
of the transition
fit as first
oversize
All A430 WV
 Contact Airbus
 Before next
flight
None
 None
Hole diameter
in tolerance of
the transition fit
as first oversize
All A340 WV
 Do a Rototest
Inspection of
the Fastener
Hole at First
Oversize
Diameter on
RH Side, refer
to SUBTASK
534215-832-012
001
Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 22
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 41

@A340
SERVICE BULLETIN
Table 3, Config. 001 - Check of the Fastener Hole of the Area C located at Frame 40 lower Shell
Panel Junction, RH Side
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
All A340 WV
 Install new
Same Fastener
at First
Oversize
Diameter in
transition fit on
RH Side, refer
to SUBTASK
534215-833-005
001
and
Before next
flight
None
 None
A340-200,
WV002 Serie
FC optimized
set: 24,600
FC/98,700 FH
or
FH optimized
set: 20,400
FC/138,700 FH
See NOTE (*)
No crack found
A340-300,
WV020 Serie
Repeat the
check of the
Fastener Hole
at First
Oversize
Diameter on
RH Side, refer
to SUBTASK
534215-832-005
001
None
 None
FC optimized
set: 20,200
FC/81,100 FH
or
FH optimized
set: 16,900
FC/114,000 FH
See NOTE (*)
Crack found
 All A340 WV
 Oversize the
Holes to
Second
Oversize
Diameter in
transition fit on
RH Side, refer
to SUBTASK
534215-833-012
001
and
do a rototest
inspection
Before next
flight
None
 None
Crack found
after rototest
inspection
All A340 WV
 Contact Airbus
 Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 23
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 42

@A340
SERVICE BULLETIN
Table 3, Config. 001 - Check of the Fastener Hole of the Area C located at Frame 40 lower Shell
Panel Junction, RH Side
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
All A340 WV
 Install in
transition fit
Relevant
Fastener at
Second
Oversize
Diameter on
RH Side, refer
to SUBTASK
534215-833-019
001
and
Before next
flight
None
 None
A340-200,
WV002 Serie
FC optimized
set: 24,600
FC/98,700 FH
or
FH optimized
set: 20,400
FC/138,700 FH
See NOTE (*)
No crack found
after rototest
inspection
A340-300,
WV020 Serie
D oac h e c ko f
the Fastener
Hole at Second
Oversize
Diameter on
RH Side, refer
to SUBTASK
534215-832-019
001
None
 None
FC optimized
set: 20,200
FC/81,100 FH
or
FH optimized
set: 16,900
FC/114,000 FH
See NOTE (*)
Hole diameter
not in tolerance
of the transition
fit as second
oversize
All A340 WV
 Contact Airbus
 Before next
flight
None
 None
Hole diameter
in tolerance of
the transition fit
as second
oversize
All A340 WV
 Do a Rototest
Inspection of
the Fastener
Hole at Second
Oversize
Diameter on
RH Side, refer
to SUBTASK
534215-832-026
001
Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 24
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 43

@A340
SERVICE BULLETIN
Table 3, Config. 001 - Check of the Fastener Hole of the Area C located at Frame 40 lower Shell
Panel Junction, RH Side
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
Crack found
 All A340 WV
 Contact Airbus
 Before next
flight
None
 None
All A340 WV
 Install New
same Fastener
at Second
Oversize
Diameter in
transition fit on
RH Side, refer
to SUBSTASK
534215-833-026
001
and
Before next
flight
None
 None
A340-200,
WV002 Serie
FC optimized
set: 24,600
FC/98,700 FH
or
FH optimized
set: 20,400
FC/138,700 FH
See NOTE (*)
No crack found
A340-300,
WV020 Serie
Repeat the
check of the
Fastener Hole
at Second
Oversize
Diameter on
RH Side, refer
to SUBTASK
534215-832-019
001
None
 None
FC optimized
set: 20,200
FC/81,100 FH
or
FH optimized
set: 16,900
FC/114,000 FH
See NOTE (*)
NOTE (*): For FH and FC optimization on A340 aircraft, operators shall select threshold/interval that
better suits aircraft operation and utilization (Refer to OIT 999.0086/11).
**CONF 002
This Service Bulletin has been classified Mandatory by the issue of an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA). The AD must
be used as the reference document for the mandated accomplishment timescale.
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 25
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 44

@A340
SERVICE BULLETIN
Table 1, Config. 002 - Check of the Fastener Holes located at Frame 40 lower Shell Panel Junction,
LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
All aircraft
 A340-300,
WV020 and
WV050 Series
D oac h e c ko f
the Fastener
Holes at
Nominal
Diameter on LH
and RH Sides,
refer to
SUBTASK
534215-832-006
001 for LH Side
and to
SUBTASK
534215-832-007
001 for RH
Side
FC optimized
set: 21,900
FC/88,100 FH
or
FH optimized
set: 18,100
FC/122,500 FH
See NOTE (*)
None
 None
Hole diameter
not in tolerance
of the transition
fit as nominal
All A340 WV
 Contact Airbus
 Before next
flight
None
 None
Hole diameter
in tolerance of
the transition fit
as nominal
All A340 WV
 Do a Rototest
Inspection of
the Fastener
Holes at
Nominal
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-013
001 for LH Side
and/or to
SUBTASK
534215-832-014
001 for RH
Side
Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 26
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 45

@A340
SERVICE BULLETIN
Table 1, Config. 002 - Check of the Fastener Holes located at Frame 40 lower Shell Panel Junction,
LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
All A340 WV
 Install New
Same
Fasteners at
Nominal
Diameter in
transition fit on
LH and/or RH
Sides, refer to
SUBTASK
534215-833-006
001 for LH Side
and/or to
SUBTASK
534215-833-007
001 for RH
Side
and
Before next
flight
None
 None
No crack found
A340-300,
WV020 and
WV050 Series
Repeat the
check of the
Fastener Holes
at Nominal
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-006
001 for LH Side
and/or to
SUBTASK
534215-832-007
001 for RH
Side
None
 None
 FC optimized
set: 20,200
FC/81,100 FH
or
FH optimized
set: 16,900
FC/114,000 FH
See NOTE (*)
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 27
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 46

@A340
SERVICE BULLETIN
Table 1, Config. 002 - Check of the Fastener Holes located at Frame 40 lower Shell Panel Junction,
LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
Crack found
 All A340 WV
 Oversize the
Holes to First
Oversize
Diameter in
transition fit on
LH and/or RH
Sides, refer to
SUBTASK
534215-833-013
001 for LH Side
and/or to
SUBTASK
534215-833-014
001 for RH
Side
and
do a rototest
inspection
Before next
flight
None
 None
Crack found
after rototest
inspection
All A340 WV
 Contact Airbus
 Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 28
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 47

@A340
SERVICE BULLETIN
Table 1, Config. 002 - Check of the Fastener Holes located at Frame 40 lower Shell Panel Junction,
LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
All A340 WV
 Install in
transition fit
Relevant
Fasteners at
First Oversize
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-833-020
001 for LH Side
and/or to
SUBTASK
534215-833-021
001 for RH
Side
and
Before next
flight
None
 None
No crack found
after rototest
inspection
A340-300,
WV020 and
WV050 Series
D oac h e c ko f
the Fastener
Holes at First
Oversize
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-020
001 for LH Side
and/or to
SUBTASK
534215-832-021
001 for RH
Side
None
 None
 FC optimized
set: 20,200
FC/81,100 FH
or
FH optimized
set: 16,900
FC/114,000 FH
See NOTE (*)
Hole diameter
not in tolerance
of the transition
fit as first
oversize
All A340 WV
 Contact Airbus
 Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 29
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 48

@A340
SERVICE BULLETIN
Table 1, Config. 002 - Check of the Fastener Holes located at Frame 40 lower Shell Panel Junction,
LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
Hole diameter
in tolerance of
the transition fit
as first oversize
All A340 WV
 Do a Rototest
Inspection of
the Fastener
Holes at First
Oversize
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-027
001 for LH Side
and/or to
SUBTASK
534215-832-028
001 for RH
Side
Before next
flight
None
 None
Crack found
 All A340 WV
 Contact Airbus
 Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 30
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 49

@A340
SERVICE BULLETIN
Table 1, Config. 002 - Check of the Fastener Holes located at Frame 40 lower Shell Panel Junction,
LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
All A340 WV
 Install New
same
Fasteners at
First Oversize
Diameter in
transition fit on
LH and/or RH
Sides, refer to
SUBTASK
534215-833-027
001 for LH Side
and/or to
SUBSTASK
534215-833-028
001 for RH
Side
and
Before next
flight
None
 None
No crack found
A340-300,
WV020 and
WV050 Series
Repeat the
check of the
Fastener Holes
at First
Oversize
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-020
001 for LH Side
and/or to
SUBTASK
534215-832-021
001 for RH
Side
None
 None
 FC optimized
set: 20,200
FC/81,100 FH
or
FH optimized
set: 16,900
FC/114,000 FH
See NOTE (*)
NOTE (*): For FH and FC optimization on A340 aircraft, operators shall select threshold/interval that
better suits aircraft operation and utilization (Refer to OIT 999.0086/11).
**CONF 003
This Service Bulletin has been classified Mandatory by the issue of an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA). The AD must
be used as the reference document for the mandated accomplishment timescale.
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 31
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 50

@A340
SERVICE BULLETIN
Table 1, Config. 003 - Check of the Fastener Holes located at Frame 40 lower Shell Panel Junction,
LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
All aircraft
 A340-300,
WV050 Serie
D oac h e c ko f
the Fastener
Holes at
Nominal
Diameter on LH
and RH Sides,
refer to
SUBTASK
534215-832-006
002 for LH Side
and to
SUBTASK
534215-832-007
002 for RH
Side
FC optimized
set: 21,900
FC/88,100 FH
or
FH optimized
set: 18,100
FC/122,500 FH
See NOTE (*)
None
 None
Hole diameter
not in tolerance
of the transition
fit as nominal
All A340 WV
 Contact Airbus
 Before next
flight
None
 None
Hole diameter
in tolerance of
the transition fit
as nominal
All A340 WV
 Do a Rototest
Inspection of
the Fastener
Holes at
Nominal
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-013
002 for LH Side
and/or to
SUBTASK
534215-832-014
002 for RH
Side
Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 32
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 51

@A340
SERVICE BULLETIN
Table 1, Config. 003 - Check of the Fastener Holes located at Frame 40 lower Shell Panel Junction,
LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
All A340 WV
 Install New
Same
Fasteners at
Nominal
Diameter in
transition fit on
LH and/or RH
Sides, refer to
SUBTASK
534215-833-006
002 for LH Side
and/or to
SUBTASK
534215-833-007
002 for RH
Side
and
Before next
flight
None
 None
No crack found
A340-300,
WV050 Serie
Repeat the
check of the
Fastener Holes
at Nominal
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-006
002 for LH Side
and/or to
SUBTASK
534215-832-007
002 for RH
Side
None
 None
 FC optimized
set: 20,200
FC/81,100 FH
or
FH optimized
set: 16,900
FC/114,000 FH
See NOTE (*)
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 33
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 52

@A340
SERVICE BULLETIN
Table 1, Config. 003 - Check of the Fastener Holes located at Frame 40 lower Shell Panel Junction,
LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
Crack found
 All A340 WV
 Oversize the
Holes to First
Oversize
Diameter in
transition fit on
LH and/or RH
Sides, refer to
SUBTASK
534215-833-013
002 for LH Side
and/or to
SUBTASK
534215-833-014
002 for RH
Side
and
do a rototest
inspection
Before next
flight
None
 None
Crack found
after rototest
inspection
All A340 WV
 Contact Airbus
 Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 34
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 53

@A340
SERVICE BULLETIN
Table 1, Config. 003 - Check of the Fastener Holes located at Frame 40 lower Shell Panel Junction,
LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
All A340 WV
 Install in
transition fit
Relevant
Fasteners at
First Oversize
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-833-020
002 for LH Side
and/or to
SUBTASK
534215-833-021
002 for RH
Side
and
Before next
flight
None
 None
No crack found
after rototest
inspection
A340-300,
WV050 Serie
D oac h e c ko f
the Fastener
Holes at First
Oversize
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-020
002 for LH Side
and/or to
SUBTASK
534215-832-021
002 for RH
Side
None
 None
 FC optimized
set: 20,200
FC/81,100 FH
or
FH optimized
set: 16,900
FC/114,000 FH
See NOTE (*)
Hole diameter
not in tolerance
of the transition
fit as first
oversize
All A340 WV
 Contact Airbus
 Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 35
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 54

@A340
SERVICE BULLETIN
Table 1, Config. 003 - Check of the Fastener Holes located at Frame 40 lower Shell Panel Junction,
LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
Hole diameter
in tolerance of
the transition fit
as first oversize
All A340 WV
 Do a Rototest
Inspection of
the Fastener
Holes at First
Oversize
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-027
001 for LH Side
and/or to
SUBTASK
534215-832-028
001 for RH
Side
Before next
flight
None
 None
Crack found
 All A340 WV
 Contact Airbus
 Before next
flight
None
 None
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 36
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 55

@A340
SERVICE BULLETIN
Table 1, Config. 003 - Check of the Fastener Holes located at Frame 40 lower Shell Panel Junction,
LH and RH Sides
Compliance Time (whichever
occurs later)
Condition
 Action
Threshold
(whichever
occurs first)
Grace period
(whichever
occurs first)
Repetitive
Interval
(whichever
occurs first)
All A340 WV
 Install New
same
Fasteners at
First Oversize
Diameter in
transition fit on
LH and/or RH
Sides, refer to
SUBTASK
534215-833-027
002 for LH Side
and/or to
SUBSTASK
534215-833-028
002 for RH
Side
and
Before next
flight
None
 None
No crack found
A340-300,
WV050 Serie
Repeat the
check of the
Fastener Holes
at First
Oversize
Diameter on LH
and/or RH
Sides, refer to
SUBTASK
534215-832-020
002 for LH Side
and/or to
SUBTASK
534215-832-021
002 for RH
Side
None
 None
 FC optimized
set: 20,200
FC/81,100 FH
or
FH optimized
set: 16,900
FC/114,000 FH
See NOTE (*)
NOTE (*): For FH and FC optimization on A340 aircraft, operators shall select threshold/interval that
better suits aircraft operation and utilization (Refer to OIT 999.0086/11).
**CONF ALL
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA.21J.031.
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 37
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 56

@A340
SERVICE BULLETIN
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
**CONF 001
Task 534215-832-801-001: Inspection
Get Access
 12.00
On Aircraft
Do a check of the Fastener Holes at Second Oversize
Diameter of the Area A located at Frame 40 Lower
Shell Panel Junction, LH Side
2.00
Do a check of the Fastener Holes at Second Oversize
Diameter of the Area A located at Frame 40 Lower
Shell Panel Junction, RH Side
2.00
Do a check of the Fastener Holes at Nominal Diameter
of the Area B located at Frame 40 Lower Shell Panel
Junction, LH Side
3.00
Do a check of the Fastener Holes at Nominal Diameter
of the Area B located at Frame 40 Lower Shell Panel
Junction, RH Side
2.50
Do a check of the Fastener Hole at First Oversize
Diameter of the Area C located at Frame 40 Lower
Shell Panel Junction, RH Side
0.50
Do a Rototest Inspection of the Fastener Holes at
Second Oversize Diameter of the Area A located at
Frame 40 Lower Shell Panel Junction, LH Side
1.00
Do a Rototest Inspection of the Fastener Holes at
Second Oversize Diameter of the Area A located at
Frame 40 Lower Shell Panel Junction, RH Side
1.00
Do a Rototest Inspection of the Fastener Holes at
Nominal Diameter of the Area B located at Frame 40
Lower Shell Panel Junction, LH Side
1.50
Do a Rototest Inspection of the Fastener Holes at
Nominal Diameter of the Area B located at Frame 40
Lower Shell Panel Junction, RH Side
1.25
Do a Rototest Inspection of the Fastener Hole at First
Oversize Diameter of the Area C located at Frame 40
Lower Shell Panel Junction, RH Side
0.25
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 38
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 57

@A340
SERVICE BULLETIN
Task 534215-832-801-001: Inspection
Do a check of the Fastener Holes at Next Nominal
Diameter of the Area A located at Frame 40 Lower
Shell Panel Junction, LH Side
2.00
Do a check of the Fastener Holes at Next Nominal
Diameter of the Area A located at Frame 40 Lower
Shell Panel Junction, RH Side
2.00
Do a check of the Fastener Holes at First Oversize
Diameter of the Area B located at Frame 40 Lower
Shell Panel Junction, LH Side
3.00
Do a check of the Fastener Holes at First Oversize
Diameter of the Area B located at Frame 40 Lower
Shell Panel Junction, RH Side
2.50
Do a check of the Fastener Hole at Second Oversize
Diameter of the Area C located at Frame 40 Lower
Shell Panel Junction, RH Side
0.50
Do a Rototest Inspection of the Fastener Holes at Next
Nominal Diameter of the Area A located at Frame 40
Lower Shell Panel Junction, LH Side
1.00
Do a Rototest Inspection of the Fastener Holes at Next
Nominal Diameter of the Area A located at Frame 40
Lower Shell Panel Junction, RH Side
1.00
Do a Rototest Inspection of the Fastener Holes at First
Oversize Diameter of the Area B located at Frame 40
Lower Shell Panel Junction, LH Side
1.50
Do a Rototest Inspection of the Fastener Holes at First
Oversize Diameter of the Area B located at Frame 40
Lower Shell Panel Junction, RH Side
1.25
Do a Rototest Inspection of the Fastener Hole at
Second Oversize Diameter of the Area C located at
Frame 40 Lower Shell Panel Junction, RH Side
0.25
TOTAL MANHOURS
 42.00
ELAPSED TIME (HOURS)
 21.00
Task 534215-833-801-001: Repair
Get Access
 12.00
On Aircraft
Install New same Fasteners at Second Oversize
Diameter of the Area A in transition fit, LH Side
1.00
Install New same Fasteners at Second Oversize
Diameter of the Area A in transition fit, RH Side
1.00
Install New same Fasteners at Nominal Diameter of
the Area B in transition fit, LH Side
1.50
Install New same Fasteners at Nominal Diameter of
the Area B in transition fit, RH Side
1.25
Install New same Fastener at First Oversize Diameter
of the Area C in transition fit, RH Side
0.25
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 39
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 58

@A340
SERVICE BULLETIN
Task 534215-833-801-001: Repair
Oversize the Holes of the Area A to Next Nominal
Diameter in transition fit, LH Side
1.00
Oversize the Holes of the Area A to Next Nominal
Diameter in transition fit, RH Side
1.00
Oversize the Holes of the Area B to First Oversize
Diameter in transition fit, LH Side
1.50
Oversize the Holes of the Area B to First Oversize
Diameter in transition fit, RH Side
1.25
Oversize the Hole of the Area C to Second Oversize
Diameter in transition fit, RH Side
0.25
Install in transition fit Relevant Fasteners at Next
Nominal Diameter of the Area A, LH Side
1.00
Install in transition fit Relevant Fasteners at Next
Nominal Diameter of the Area A, RH Side
1.00
Install in transition fit Relevant Fasteners at First
Oversize Diameter of the Area B, LH Side
1.50
Install in transition fit Relevant Fasteners at First
Oversize Diameter of the Area B, RH Side
1.25
Install in transition fit Relevant Fastener at Second
Oversize Diameter of the Area C, RH Side
0.25
Install New same Fasteners at Next Nominal Diameter
of the Area A in transition fit, LH Side
1.00
Install New same Fasteners at Next Nominal Diameter
of the Area A in transition fit, RH Side
1.00
Install New same Fasteners at First Oversize Diameter
of the Area B in transition fit, LH Side
1.50
Install New same Fasteners at First Oversize Diameter
of the Area B in transition fit, RH Side
1.25
Install New same Fastener at Second Oversize
Diameter of the Area C in transition fit, RH Side
0.25
Tests
 2.00
Close-Up
 12.00
TOTAL MANHOURS
 46.00
ELAPSED TIME (HOURS)
 23.00
NOTE
: The minimum manhours necessary to accomplish this Service Bulletin are
those for the Inspection. Depending on the inspection result, additional
manhours can apply.
**CONF 002
Task 534215-832-801-001: Inspection
Get Access
 12.00
On Aircraft
Do a check of the Fastener Holes at Nominal Diameter
located at Frame 40 Lower Shell Panel Junction, LH
Side
5.00
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 40
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 59

@A340
SERVICE BULLETIN
Task 534215-832-801-001: Inspection
Do a check of the Fastener Holes at Nominal Diameter
located at Frame 40 Lower Shell Panel Junction, RH
Side
5.00
Do a Rototest Inspection of the Fastener Holes at
Nominal Diameter at Frame 40 Lower Shell Panel
Junction, LH Side
2.50
Do a Rototest Inspection of the Fastener Holes at
Nominal Diameter at Frame 40 Lower Shell Panel
Junction, RH Side
2.50
Do a check of the Fastener Holes at First Oversize
Diameter at Frame 40 Lower Shell Panel Junction, LH
Side
5.00
Do a check of the Fastener Holes at First Oversize
Diameter at Frame 40 Lower Shell Panel Junction, RH
Side
5.00
Do a Rototest Inspection of the Fastener Holes at First
Oversize Diameter at Frame 40 Lower Shell Panel
Junction, LH Side
2.50
Do a Rototest Inspection of the Fastener Holes at First
Oversize Diameter at Frame 40 Lower Shell Panel
Junction, RH Side
2.50
TOTAL MANHOURS
 42.00
ELAPSED TIME (HOURS)
 21.00
Task 534215-833-801-001: Repair
Get Access
 12.00
On Aircraft
Install New same Fasteners at Nominal Diameter in
transition fit, LH Side
2.50
Install New same Fasteners at Nominal Diameter in
transition fit, RH Side
2.50
Oversize the Holes to First Oversize Diameter in
transition fit, LH Side
2.50
Oversize the Holes to First Oversize Diameter in
transition fit, RH Side
2.50
Install in transition fit Relevant Fasteners at First
Oversize Diameter, LH Side
2.50
Install in transition fit Relevant Fasteners at First
Oversize Diameter, RH Side
2.50
Install New same Fasteners at First Oversize Diameter
in transition fit, LH Side
2.50
Install New same Fasteners at First Oversize Diameter
in transition fit, RH Side
2.50
Tests
 2.00
Close-Up
 12.00
TOTAL MANHOURS
 46.00
ELAPSED TIME (HOURS)
 23.00
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 41
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 60

@A340
SERVICE BULLETIN
NOTE
: The minimum manhours necessary to accomplish this Service Bulletin are
those for the Inspection. Depending on the inspection result, additional
manhours can apply.
**CONF 003
Task 534215-832-801-001: Inspection
Get Access
 12.00
On Aircraft
Do a check of the Fastener Holes at Nominal Diameter
located at Frame 40 Lower Shell Panel Junction, LH
Side
5.00
Do a check of the Fastener Holes at Nominal Diameter
located at Frame 40 Lower Shell Panel Junction, RH
Side
5.00
Do a Rototest Inspection of the Fastener Holes at
Nominal Diameter at Frame 40 Lower Shell Panel
Junction, LH Side
2.50
Do a Rototest Inspection of the Fastener Holes at
Nominal Diameter at Frame 40 Lower Shell Panel
Junction, RH Side
2.50
Do a check of the Fastener Holes at First Oversize
Diameter at Frame 40 Lower Shell Panel Junction, LH
Side
5.00
Do a check of the Fastener Holes at First Oversize
Diameter at Frame 40 Lower Shell Panel Junction, RH
Side
5.00
Do a Rototest Inspection of the Fastener Holes at First
Oversize Diameter at Frame 40 Lower Shell Panel
Junction, LH Side
2.50
Do a Rototest Inspection of the Fastener Holes at First
Oversize Diameter at Frame 40 Lower Shell Panel
Junction, RH Side
2.50
TOTAL MANHOURS
 42.00
ELAPSED TIME (HOURS)
 21.00
Task 534215-833-801-001: Repair
Get Access
 12.00
On Aircraft
Install New same Fasteners at Nominal Diameter in
transition fit, LH Side
2.50
Install New same Fasteners at Nominal Diameter in
transition fit, RH Side
2.50
Oversize the Holes to First Oversize Diameter in
transition fit, LH Side
2.50
Oversize the Holes to First Oversize Diameter in
transition fit, RH Side
2.50
Install in transition fit Relevant Fasteners at First
Oversize Diameter, LH Side
2.50
DATE: Jun 21/13 SERVICE BULLETIN No.: A340-53-4215
REVISION No.: 02 - Nov 23/16 Page: 42
5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

The text continues at https://openairdocs.org/service-documents/airbus/a340-53-4215/file/6a4ec939cf24.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
